Showing 1–41 of 41 results for author: Ling, Y

Exploring the Potential of Two-Dimensional Materials for Innovations in Multifunctional Electrochromic Biochemical Sensors: A Review

Authors: Nadia Anwar, Guangya Jiang, Yi Wen, Muqarrab Ahmed, Haodong Zhong, Shen Ao, Zehui Li, Yunhan Ling, Grégory F. Schneider, Wangyang Fu, Zhengjun Zhang

Abstract: In this review, the current advancements in electrochromic sensors based on two-dimensional (2D) materials with rich chemical and physical properties are critically examined. By summarizing the current trends in and prospects for utilizing multifunctional electrochromic devices (ECDs) in environmental monitoring, food quality control, medical diagnosis, and life science-related investigations, we… ▽ More In this review, the current advancements in electrochromic sensors based on two-dimensional (2D) materials with rich chemical and physical properties are critically examined. By summarizing the current trends in and prospects for utilizing multifunctional electrochromic devices (ECDs) in environmental monitoring, food quality control, medical diagnosis, and life science-related investigations, we explore the potential of using 2D materials for rational design of ECDs with compelling electrical and optical properties for biochemical sensing applications. △ Less

Submitted 20 May, 2024; originally announced May 2024.

Comments: 37 pages, 9 Figures, 2 tables

Data-driven modeling of the aerodynamic deformation and drag for a freely moving drop in the sub-critical Weber number regime

Authors: T. Mahmood, A. Tonmoy, C. Sevart, Y. Wang, Y. Ling

Abstract: Accurate prediction of the dynamics and deformation of freely moving drops is crucial for numerous droplet applications. When the Weber number is finite but below a critical value, the drop deviates from its spherical shape and deforms as it is accelerated by the gas stream. Since aerodynamic drag on the drop depends on its shape oscillation, accurately modeling the drop shape evolution is essenti… ▽ More Accurate prediction of the dynamics and deformation of freely moving drops is crucial for numerous droplet applications. When the Weber number is finite but below a critical value, the drop deviates from its spherical shape and deforms as it is accelerated by the gas stream. Since aerodynamic drag on the drop depends on its shape oscillation, accurately modeling the drop shape evolution is essential for predicting the drop's velocity and position. In this study, 2D axisymmetric interface-resolved simulations were performed to provide a comprehensive dataset for develo** a data-driven model. Parametric simulations were conducted by systematically varying the drop diameter and free-stream velocity, achieving wide ranges of Weber and Reynolds numbers. The instantaneous drop shapes obtained in simulations are characterized by spherical harmonics. Temporal data of the drag and modal coefficients are collected from the simulation data to train a Nonlinear Auto-Regressive models with eXogenous inputs (NARX) neural network model. The overall model consists of two multi-layer perceptron networks, which predict the modal coefficients and the drop drag, respectively. The drop shape can be reconstructed with the predicted modal coefficients. The model predictions are validated against the simulation data in the testing set, showing excellent agreement for the evolutions of both the drop shape and drag. △ Less

Submitted 1 May, 2024; originally announced May 2024.

Divide-Conquer-and-Merge: Memory- and Time-Efficient Holographic Displays

Authors: Zhenxing Dong, Jidong Jia, Yan Li, Yuye Ling

Abstract: Recently, deep learning-based computer-generated holography (CGH) has demonstrated tremendous potential in three-dimensional (3D) displays and yielded impressive display quality. However, most existing deep learning-based CGH techniques can only generate holograms of 1080p resolution, which is far from the ultra-high resolution (16K+) required for practical virtual reality (VR) and augmented reali… ▽ More Recently, deep learning-based computer-generated holography (CGH) has demonstrated tremendous potential in three-dimensional (3D) displays and yielded impressive display quality. However, most existing deep learning-based CGH techniques can only generate holograms of 1080p resolution, which is far from the ultra-high resolution (16K+) required for practical virtual reality (VR) and augmented reality (AR) applications to support a wide field of view and large eye box. One of the major obstacles in current CGH frameworks lies in the limited memory available on consumer-grade GPUs which could not facilitate the generation of higher-definition holograms. To overcome the aforementioned challenge, we proposed a divide-conquer-and-merge strategy to address the memory and computational capacity scarcity in ultra-high-definition CGH generation. This algorithm empowers existing CGH frameworks to synthesize higher-definition holograms at a faster speed while maintaining high-fidelity image display quality. Both simulations and experiments were conducted to demonstrate the capabilities of the proposed framework. By integrating our strategy into HoloNet and CCNNs, we achieved significant reductions in GPU memory usage during the training period by 64.3\% and 12.9\%, respectively. Furthermore, we observed substantial speed improvements in hologram generation, with an acceleration of up to 3$\times$ and 2 $\times$, respectively. Particularly, we successfully trained and inferred 8K definition holograms on an NVIDIA GeForce RTX 3090 GPU for the first time in simulations. Furthermore, we conducted full-color optical experiments to verify the effectiveness of our method. We believe our strategy can provide a novel approach for memory- and time-efficient holographic displays. △ Less

Submitted 25 February, 2024; originally announced April 2024.

Comments: This paper has been accepted as conference paper in IEEE VR 2024

Building-block flow model for computational fluids

Authors: Gonzalo Arranz, Yuenong Ling, Sam Costa, Konrad Goc, Adrian Lozano-Duran

Abstract: We introduce a closure model for wall-modeled large-eddy simulation (WMLES), referred to as the Building-block Flow Model (BFM). The foundation of the model rests on the premise that a finite collection of simple flows encapsulates the essential physics necessary to predict more complex scenarios. The BFM is implemented using artificial neural networks and introduces five advancements within the f… ▽ More We introduce a closure model for wall-modeled large-eddy simulation (WMLES), referred to as the Building-block Flow Model (BFM). The foundation of the model rests on the premise that a finite collection of simple flows encapsulates the essential physics necessary to predict more complex scenarios. The BFM is implemented using artificial neural networks and introduces five advancements within the framework of WMLES: (1) It is designed to predict multiple flow regimes (wall turbulence under zero, favorable, adverse mean-pressure-gradient, and separation); (2) It unifies the closure model at solid boundaries (i.e., the wall model) and the rest of the flow (i.e., the subgrid-scale model) into a single entity; (3) It ensures consistency with numerical schemes and gridding strategy by accounting for numerical errors; (4) It is directly applicable to arbitrary complex geometries; (5) It can be scaled up to model additional flow physics in the future if needed (e.g., shockwaves and laminar-to-turbulent transition). The BFM is utilized to predict key quantities of interest in turbulent channel and pipe flows, a Gaussian bump, a simplified aircraft, and a realistic aircraft in landing configuration. In all cases, the BFM demonstrates similar or superior capabilities in terms of accuracy and computational efficiency compared to previous state-of-the-art closure models. △ Less

Submitted 14 June, 2024; v1 submitted 13 March, 2024; originally announced March 2024.

Motion-enhanced Holography

Authors: Zhenxing Dong, Yuye Ling, Yan Li, Yikai Su

Abstract: Holographic displays, which enable pixel-level depth control and aberration correction, are considered the key technology for the next-generation virtual reality (VR) and augmented reality (AR) applications. However, traditional holographic systems suffer from limited spatial bandwidth product (SBP), which makes them impossible to reproduce \textit{realistic} 3D displays. Time-multiplexed holograp… ▽ More Holographic displays, which enable pixel-level depth control and aberration correction, are considered the key technology for the next-generation virtual reality (VR) and augmented reality (AR) applications. However, traditional holographic systems suffer from limited spatial bandwidth product (SBP), which makes them impossible to reproduce \textit{realistic} 3D displays. Time-multiplexed holography creates different speckle patterns over time and then averages them to achieve a speckle-free 3D display. However, this approach requires spatial light modulators (SLMs) with ultra-fast refresh rates, and current algorithms cannot update holograms at such speeds. To overcome the aforementioned challenge, we proposed a novel architecture, motion-enhanced holography, that achieves \textit{realistic} 3D holographic displays without artifacts by continuously shifting a special hologram. We introduced an iterative algorithm to synthesize motion-enhanced holograms and demonstrated that our method achieved a 10 dB improvement in the peak signal-to-noise ratio (PSNR) of 3D focal stacks in numerical simulations compared to traditional holographic systems. Furthermore, we validated this idea in optical experiments utilizing a high-speed and high-precision programmable three-axis displacement stage to display full-color and high-quality 3D focal stacks. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Comments: 10 pages, 5 figures

Numerical study of natural oscillations of supported drops with free and pinned contact lines

Authors: Jordan Sakakeeny, Yue Ling

Abstract: In the present study, the axisymmetric natural oscillations of a liquid drop supported by a flat surface is investigated by direct numerical simulation. The liquid-gas interface is captured using a geometric volume-of-fluid (VOF) method. A parametric study is carried out by varying the equilibrium contact angle and the gravitational Bond number (Bo). Both positive and negative gravities are consid… ▽ More In the present study, the axisymmetric natural oscillations of a liquid drop supported by a flat surface is investigated by direct numerical simulation. The liquid-gas interface is captured using a geometric volume-of-fluid (VOF) method. A parametric study is carried out by varying the equilibrium contact angle and the gravitational Bond number (Bo). Both positive and negative gravities are considered, and thus the results cover both pendant and sessile drops. To incorporate the effect of contact line mobility, the two asymptotic limits, namely the pinned contact line (PCL) and free contact line (FCL) conditions, are considered and their effects on the drop oscillation features are characterized. The predicted oscillation frequencies for PCL and FCL serve as the upper and lower bounds for general situations. The drop oscillation is initiated by increasing the gravity magnitude for a short time. The first mode due to the drop centroid translation dominates the excited oscillation. The oscillation frequency scales with the capillary frequency, and the normalized frequency monotonically decreases with the equilibrium contact angle. For zero gravity, the computed frequencies for all contact angles agree remarkably well with the inviscid theory for both the PCL and FCL conditions. The kinetic energy correction factor is introduced to account for the additional contribution of the oscillation-induced internal flow to the overall kinetic energy of the drop. Both the frequency and the kinetic energy correction factor increase with Bo, decrease with the contact angle, and increase when the contact line condition changed from FCL to PCL. The variation of oscillation frequency due to the change of Bo is particularly significant when the contact angle is large. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Journal ref: Physics of Fluids 33.6 (2021)

Impact of inlet gas turbulence on the formation, development and breakup of interfacial waves in a two-phase mixing layer

Authors: Delin Jiang, Yue Ling

Abstract: Understanding the development and breakup of interfacial waves in a two-phase mixing layer between the gas and liquid streams is paramount to atomization. Due to the velocity difference between the two streams, the shear on the interface triggers a longitudinal instability, which develops to interfacial waves that propagate downstream. As the interfacial waves grow spatially, transverse modulation… ▽ More Understanding the development and breakup of interfacial waves in a two-phase mixing layer between the gas and liquid streams is paramount to atomization. Due to the velocity difference between the two streams, the shear on the interface triggers a longitudinal instability, which develops to interfacial waves that propagate downstream. As the interfacial waves grow spatially, transverse modulations arise, turning the interfacial waves from quasi-2D to fully 3D. The inlet gas turbulence intensity has a strong impact on the interfacial instability. Therefore, parametric direct numerical simulations are performed in the present study to systematically investigate the effect of the inlet gas turbulence on the formation, development, and breakup of the interfacial waves. The open-source multiphase flow solver, PARIS, is used for the simulations and the mass-momentum consistent volume-of-fluid method is used to capture the sharp gas-liquid interfaces. Two computational domain widths are considered and the wide domain will allow a detailed study of the transverse development of the interfacial waves. The dominant frequency and spatial growth rate of the longitudinal instability are found to increase with the inlet gas turbulence intensity. The dominant transverse wavenumber, determined by the Rayleigh-Taylor instability, scales with the longitudinal frequency, so it also increases with the inlet gas turbulence intensity. The holes formed in the liquid sheet is important to the disintegration of the interfacial waves. The holes formation is influenced by the inlet gas turbulence. As a result, the sheet breakup dynamics and the statistics of the droplets formed also change accordingly. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Journal ref: Journal of Fluid Mechanics 921 (2021): A15

A model to predict the oscillation frequency for drops pinned on a vertical planar surface

Authors: Jordan Sakakeeny, C. Deshpande, S. Deb, Jorge L. Alvarado, Yue Ling

Abstract: Accurate prediction of the natural frequency for the lateral oscillation of a liquid drop pinned on a vertical planar surface is important to many drop applications. The natural oscillation frequency, normalized by the capillary frequency, is {mainly} a function of the equilibrium contact angle and the Bond number (Bo), when the contact lines remain pinned. Parametric numerical and experimental st… ▽ More Accurate prediction of the natural frequency for the lateral oscillation of a liquid drop pinned on a vertical planar surface is important to many drop applications. The natural oscillation frequency, normalized by the capillary frequency, is {mainly} a function of the equilibrium contact angle and the Bond number (Bo), when the contact lines remain pinned. Parametric numerical and experimental studies have been performed to establish a comprehensive understanding of oscillation dynamics. {An} inviscid model has been developed to predict the oscillation frequency for wide ranges of Bo and contact angles. The model reveals the scaling relation between the normalized frequency and Bo, which is validated by the numerical simulation results. For a given equilibrium contact angle, the lateral oscillation frequency decreases with Bo, implying that resonance frequencies will be magnified if the drop oscillations occur in a reduced gravity environment. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Journal ref: Journal of Fluid Mechanics 928 (2021): A28

Direct numerical simulation of compressible interfacial multiphase flows using a mass-momentum-energy consistent volume-of-fluid method

Authors: Bo Zhang, Bradley Boyd, Yue Ling

Abstract: Compressible interfacial multiphase flows (CIMF) are essential to different applications, such as liquid fuel injection in supersonic propulsion systems. Since high-level details in CIMF are often difficult to measure in experiments, numerical simulation is an important alternative to shed light on the unclear physics. A direct numerical simulation (DNS) of CIMF will need to rigorously resolve the… ▽ More Compressible interfacial multiphase flows (CIMF) are essential to different applications, such as liquid fuel injection in supersonic propulsion systems. Since high-level details in CIMF are often difficult to measure in experiments, numerical simulation is an important alternative to shed light on the unclear physics. A direct numerical simulation (DNS) of CIMF will need to rigorously resolve the shock waves, the interfaces, and the interaction between the two. A novel numerical method has been developed and implemented in the present study. The geometric volume-of-fluid (VOF) method is employed to resolve the sharp interfaces between the two phases. The advection of the density, momentum, and energy is carried out consistently with VOF advection. To suppress spurious oscillations near shocks, numerical diffusion is introduced based on the Kurganov-Tadmor method in the region away from the interface. The contribution of pressure is incorporated using the projection method and the pressure is obtained by solving the Poisson-Helmholtz equation, which allows the present method to handle flows with all Mach numbers. The present method is tested by a sequence of CIMF problems. The simulation results are validated against theories, experiments, and other simulations, and excellent agreement has been achieved. In particular, the linear single-mode Richtmyer-Meshkov instabilities with finite Weber and Reynolds numbers are simulated. The simulation results agree very well with the linear stability theory, which affirms the capability of the present method in capturing the viscous and capillary effects on shock-interface interaction. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Journal ref: Computers & Fluids 236 (2022): 105267

A detailed numerical investigation of two-phase flows inside a planar flow-blurring atomizer

Authors: Yue Ling, Lulin Jiang

Abstract: Flow-blurring atomization is an innovative twin-fluid atomization approach that has demonstrated superior effectiveness in producing fine sprays compared to traditional airblast atomization methods. In flow-blurring atomizers, the high-speed gas flow is directed perpendicular to the liquid jet. Under specific geometric and physical conditions, the gas penetrates back into the liquid nozzle, result… ▽ More Flow-blurring atomization is an innovative twin-fluid atomization approach that has demonstrated superior effectiveness in producing fine sprays compared to traditional airblast atomization methods. In flow-blurring atomizers, the high-speed gas flow is directed perpendicular to the liquid jet. Under specific geometric and physical conditions, the gas penetrates back into the liquid nozzle, resulting in a highly unsteady bubbly two-phase mixing zone. Despite the remarkable atomization performance of flow-blurring atomizers, the underlying dynamics of the two-phase flows and breakup mechanisms within the liquid nozzle remain poorly understood, primarily due to the challenges in experimental measurements of flow details. In this study, detailed interface-resolved numerical simulations are conducted to investigate the two-phase flows generated by a planar flow-blurring atomizer. By varying key dimensionless parameters, including the dynamic-pressure ratio, density ratio, and Weber number, over wide ranges, we aim to comprehensively characterize their effects on the two-phase flow regimes and breakup dynamics. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Information-theoretic causality and applications to turbulence: energy cascade and inner/outer layer interactions

Authors: Adrián Lozano-Durán, Gonzalo Arranz, Yuenong Ling

Abstract: We introduce an information-theoretic method for quantifying causality in chaotic systems. The approach, referred to as IT-causality, quantifies causality by measuring the information gained about future events conditioned on the knowledge of past events. The causal interactions are classified into redundant, unique, and synergistic contributions depending on their nature. The formulation is non-i… ▽ More We introduce an information-theoretic method for quantifying causality in chaotic systems. The approach, referred to as IT-causality, quantifies causality by measuring the information gained about future events conditioned on the knowledge of past events. The causal interactions are classified into redundant, unique, and synergistic contributions depending on their nature. The formulation is non-intrusive, invariance under invertible transformations of the variables, and provides the missing causality due to unobserved variables. The method only requires pairs of past-future events of the quantities of interest, making it convenient for both computational simulations and experimental investigations. IT-causality is validated in four scenarios representing basic causal interactions among variables: mediator, confounder, redundant collider, and synergistic collider. The approach is leveraged to address two questions relevant to turbulence research: i) the scale locality of the energy cascade in isotropic turbulence, and ii) the interactions between inner and outer layer flow motions in wall-bounded turbulence. In the former case, we demonstrate that causality in the energy cascade flows sequentially from larger to smaller scales without requiring intermediate scales. Conversely, the flow of information from small to large scales is shown to be redundant. In the second problem, we observe a unidirectional causality flow, with causality predominantly originating from the outer layer and propagating towards the inner layer, but not vice versa. The decomposition of IT-causality into intensities also reveals that the causality is primarily associated with high-velocity streaks. △ Less

Submitted 31 October, 2023; originally announced October 2023.

Frequency-aware optical coherence tomography image super-resolution via conditional generative adversarial neural network

Authors: Xueshen Li, Zhenxing Dong, Hongshan Liu, Jennifer J. Kang-Mieler, Yuye Ling, Yu Gan

Abstract: Optical coherence tomography (OCT) has stimulated a wide range of medical image-based diagnosis and treatment in fields such as cardiology and ophthalmology. Such applications can be further facilitated by deep learning-based super-resolution technology, which improves the capability of resolving morphological structures. However, existing deep learning-based method only focuses on spatial distrib… ▽ More Optical coherence tomography (OCT) has stimulated a wide range of medical image-based diagnosis and treatment in fields such as cardiology and ophthalmology. Such applications can be further facilitated by deep learning-based super-resolution technology, which improves the capability of resolving morphological structures. However, existing deep learning-based method only focuses on spatial distribution and disregard frequency fidelity in image reconstruction, leading to a frequency bias. To overcome this limitation, we propose a frequency-aware super-resolution framework that integrates three critical frequency-based modules (i.e., frequency transformation, frequency skip connection, and frequency alignment) and frequency-based loss function into a conditional generative adversarial network (cGAN). We conducted a large-scale quantitative study from an existing coronary OCT dataset to demonstrate the superiority of our proposed framework over existing deep learning frameworks. In addition, we confirmed the generalizability of our framework by applying it to fish corneal images and rat retinal images, demonstrating its capability to super-resolve morphological details in eye imaging. △ Less

Submitted 20 July, 2023; originally announced July 2023.

Comments: 13 pages, 7 figures, submitted to Biomedical Optics Express special issue

Simulation and modeling of the vaporization of a freely moving and deforming drop at low to moderate Weber numbers

Authors: Bradley Boyd, Sid Becker, Yue Ling

Abstract: The vaporization of a freely moving drop in a uniform, high-temperature gas stream is investigated through direct numerical simulation. The incompressible Navier-Stokes equations with surface tension and phase change are solved in conjunction with the energy equations of each phase. The sharp liquid-gas interface is tracked using the geometric Volume-of-Fluid (VOF) method and an immersed Dirichlet… ▽ More The vaporization of a freely moving drop in a uniform, high-temperature gas stream is investigated through direct numerical simulation. The incompressible Navier-Stokes equations with surface tension and phase change are solved in conjunction with the energy equations of each phase. The sharp liquid-gas interface is tracked using the geometric Volume-of-Fluid (VOF) method and an immersed Dirichlet boundary condition for temperature is imposed at the interface. The simulation approach is validated by simulating water and acetone drops at nearly zero Weber numbers, and the simulation results agree very well with the empirical relation for spherical drops. Parametric simulations were conducted to investigate the aerodynamic breakup of vaporizing drops at low to moderate Weber and Reynolds numbers. The range of Weber numbers considered has covered the vibrational and bag breakup regimes. Through the simulation results, we have characterized the impact of drop deformation and breakup on the drop vaporization rate. When the drop Weber number increases, the windward surface area increases more rapidly over time. As a result, the rate of drop volume reduction also increases. The correlation between the vaporization rate and the windward surface area is examined for different Weber and Reynolds numbers. Using the approximate correlation between the drop vaporization rate and the windward surface area and the TAB model for drop deformation, a new time-dependent drop vaporization model is proposed. The present model agrees well with the simulation results and shows a significant improvement over the conventional model for spherical drops. △ Less

Submitted 30 September, 2023; v1 submitted 9 May, 2023; originally announced May 2023.

Detailed numerical investigation of the drop aerobreakup in the bag breakup regime

Authors: Yue Ling, Taofiqhasan Mahmood

Abstract: Aerobreakup of drops is a fundamental two-phase flow problem that is essential to many spray applications. A parametric numerical study was performed by varying the gas stream velocity, focusing on the regime of moderate Weber numbers, in which the drop deforms to a forward bag. When the bag is unstable, it inflates and disintegrates into small droplets. Detailed numerical simulations were conduct… ▽ More Aerobreakup of drops is a fundamental two-phase flow problem that is essential to many spray applications. A parametric numerical study was performed by varying the gas stream velocity, focusing on the regime of moderate Weber numbers, in which the drop deforms to a forward bag. When the bag is unstable, it inflates and disintegrates into small droplets. Detailed numerical simulations were conducted using the volume-of-fluid method on an adaptive octree mesh to investigate the aerobreakup dynamics. Grid-refinement studies show that converged 3D simulation results for drop deformation and bag formation are achieved by the refinement level equivalent to 512 cells across the initial drop diameter. To resolve the thin liquid sheet when the bag inflates, the mesh is further refined to 2048 cells across the initial drop diameter. The simulation results for the drop length and radius were validated against previous experiments, and a good agreement was achieved. The high-resolution results of drop morphological evolution were used to identify the different phases in the aerobreakup process, characterize the distinct flow features and dominant mechanisms in each phase. In the early time, the drop deformation and velocity are independent of the Weber number, and a new internal-flow deformation model, which respects this asymptotic limit, has been developed. The pressure and velocity fields around the drop were shown to better understand the internal flow and interfacial instability that dictate the drop deformation. Finally, the impact of drop deformation on the drop dynamics was discussed. △ Less

Submitted 28 April, 2023; originally announced May 2023.

Wall-modeled large-eddy simulation based on building-block flows

Authors: Yuenong Ling, Gonzalo Arranz, Emily Williams, Konrad Goc, Kevin Griffin, Adrián Lozano-Durán

Abstract: A unified subgrid-scale (SGS) and wall model for large-eddy simulation (LES) is proposed by devising the flow as a collection of building blocks that enables the prediction of the eddy viscosity. The core assumption of the model is that simple canonical flows contain the essential physics to provide accurate predictions of the SGS tensor in more complex flows. The model is constructed to predict z… ▽ More A unified subgrid-scale (SGS) and wall model for large-eddy simulation (LES) is proposed by devising the flow as a collection of building blocks that enables the prediction of the eddy viscosity. The core assumption of the model is that simple canonical flows contain the essential physics to provide accurate predictions of the SGS tensor in more complex flows. The model is constructed to predict zero-pressure-gradient wall-bounded turbulence, adverse pressure gradient effects, separation and laminar flow. The approach is implemented using a Bayesian classifier, which identifies the contribution of each building block in the flow, and a neural-network-based predictor, which estimates the eddy viscosity based on the building-block units. The training data are directly obtained from wall-modeled LES with an exact SGS/wall model for the mean quantities to guarantee consistency with the numerical discretization. The model is validated in canonical flows and the NASA High-Lift Common Research Model and shown to improve the predictions with respect to current modeling approaches. △ Less

Submitted 17 December, 2022; v1 submitted 9 December, 2022; originally announced December 2022.

A consistent volume-of-fluid approach for direct numerical simulation of the aerodynamic breakup of a vaporizing drop

Authors: Bradley Boyd, Yue Ling

Abstract: A novel simulation framework has been developed in this study for the direct numerical simulation of the aerodynamic breakup of a vaporizing drop. The interfacial multiphase flow with phase change is resolved using a consistent geometric volume-of-fluid method. The bulk fluids are viscous and incompressible with surface tension at the interface. The newly-developed numerical methods have been impl… ▽ More A novel simulation framework has been developed in this study for the direct numerical simulation of the aerodynamic breakup of a vaporizing drop. The interfacial multiphase flow with phase change is resolved using a consistent geometric volume-of-fluid method. The bulk fluids are viscous and incompressible with surface tension at the interface. The newly-developed numerical methods have been implemented in the Basilisk solver, in which the adaptive octree/quadtree mesh is used for spatial discretization, allowing flexibility in dynamically refining the mesh in a user-defined region. The simulation framework is extensively validated by a series of benchmark cases, including the 1D Stefan and sucking problems, the growth of a 3D spherical bubble in a superheated liquid, and a 2D film boiling problem. The simulation results agree very well with the exact solution and previous numerical studies. 2D axisymmetric simulations were performed to resolve the vaporization of a moving drop with a low Weber number in a high-temperature free stream. The computed rate of volume loss agrees well with the empirical model of drop evaporation. Finally, the validated solver is used to simulate the aerodynamic breakup of an acetone drop at a high Weber number. A fully 3D simulation is performed and the morphological evolution of the drop is accurately resolved. The rate of vaporization is found to be significantly enhanced due to the drop deformation and breakup. The drop volume decreases nonlinearly in time and at a much higher rate than the empirical correlation for a spherical drop. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Map** mechanism between density of states and ultraviolet-visible light absorption spectra

Authors: Yang Ling, Zhengxin Chen, Jiang Wu

Abstract: This paper constructs the map** relation from density of states (DOS) to UV-vis spectra by using an ab initio perspective. Taking BiOIO3 semiconductor photocatalyst as an example, the experimental verification was also carried out. The optical response of the material considers the superposition benefits of all possible transitions. Directly using the difference between valence band maximum (VBM… ▽ More This paper constructs the map** relation from density of states (DOS) to UV-vis spectra by using an ab initio perspective. Taking BiOIO3 semiconductor photocatalyst as an example, the experimental verification was also carried out. The optical response of the material considers the superposition benefits of all possible transitions. Directly using the difference between valence band maximum (VBM) and conduction band minimum (CBM) will lead to an underestimate of the energy band gap. This paper provides a new idea of linking the density functional theory (DFT) data with experiment phenomenon. △ Less

Submitted 23 July, 2022; originally announced July 2022.

Natural oscillations of a sessile drop on flat surfaces with mobile contact lines

Authors: Jordan Sakakeeny, Yue Ling

Abstract: Oscillation of sessile drops is important to many applications. In the present study, the natural oscillation of a sessile drop on flat surfaces with free contact lines (FCL) is investigated through numerical and theoretical analysis. The FCL condition represents a limit of contact line mobility, i.e. the contact angle remains constant when the contact line moves. In the numerical simulation, the… ▽ More Oscillation of sessile drops is important to many applications. In the present study, the natural oscillation of a sessile drop on flat surfaces with free contact lines (FCL) is investigated through numerical and theoretical analysis. The FCL condition represents a limit of contact line mobility, i.e. the contact angle remains constant when the contact line moves. In the numerical simulation, the interfaces are captured by the volume-of-fluid method and the contact angle at the boundary is specified using the height-function method. The oscillation frequencies for sessile drops with FCL are mainly controlled by the contact angle and the Bond number and a parametric study is carried out to characterize their effects on the frequencies for the first and high-order modes. Particular attention is paid to the frequency of the first mode, since it is usually the dominant mode. An inviscid theoretical model for the first mode is developed. The model yields an explicit expression for the first-mode frequency as a function of the contact angle and the Bond number, with all parameters involved fully determined by the equilibrium drop theory and the simulation. The predicted frequencies for a wide range of contact angles agree very well with the simulation results for small Bond numbers. The frequencies for both the first and high-order modes decrease with the contact angle and increase with the Bond number. For the high-order modes, the frequencies for different modes generally scale with the Rayleigh frequencies. The scaling relation performs better for small Bond numbers and large contact angles. A simple model is proposed to predict the frequencies of high-order modes for large contact angles and a good agreement with the simulation results is observed. △ Less

Submitted 23 December, 2020; originally announced December 2020.

PArallel, Robust, Interface Simulator (PARIS)

Authors: W. Aniszewski, T. Arrufat, M. Crialesi-Esposito, S. Dabiri, D. Fuster, Y. Ling, J. Lu, L. Malan, S. Pal, R. Scardovelli, G. Tryggvason, P. Yecko, S. Zaleski

Abstract: Paris (PArallel, Robust, Interface Simulator) is a finite volume code for simulations of immiscible multifluid or multiphase flows. It is based on the "one-fluid" formulation of the Navier-Stokes equations where different fluids are treated as one material with variable properties, and surface tension is added as a singular interface force. The fluid equations are solved on a regular structured st… ▽ More Paris (PArallel, Robust, Interface Simulator) is a finite volume code for simulations of immiscible multifluid or multiphase flows. It is based on the "one-fluid" formulation of the Navier-Stokes equations where different fluids are treated as one material with variable properties, and surface tension is added as a singular interface force. The fluid equations are solved on a regular structured staggered grid using an explicit projection method with a first-order or second-order time integration scheme. The interface separating the different fluids is tracked by a Front-Tracking (FT) method, where the interface is represented by connected marker points, or by a Volume-of-Fluid (VOF) method, where the marker function is advected directly on the fixed grid. Paris is written in Fortran95/2002 and parallelized using MPI and domain decomposition. It is based on several earlier FT or VOF codes such as Ftc3D, Surfer or Gerris. These codes and similar ones, as well as Paris, have been used to simulate a wide range of multifluid and multiphase flows. △ Less

Submitted 21 December, 2020; originally announced December 2020.

Differential electron yield imaging with STXM

Authors: William A. Hubbard, Jared J. Lodico, Xin Yi Ling, Brian Zutter, Young-Sang Yu, David Shapiro, B. C. Regan

Abstract: Total electron yield (TEY) imaging is an established scanning transmission X-ray microscopy (STXM) technique that gives varying contrast based on a sample's geometry, elemental composition, and electrical conductivity. However, the TEY-STXM signal is determined solely by the electrons that the beam ejects from the sample. A related technique, X-ray beam-induced current (XBIC) imaging, is sensitive… ▽ More Total electron yield (TEY) imaging is an established scanning transmission X-ray microscopy (STXM) technique that gives varying contrast based on a sample's geometry, elemental composition, and electrical conductivity. However, the TEY-STXM signal is determined solely by the electrons that the beam ejects from the sample. A related technique, X-ray beam-induced current (XBIC) imaging, is sensitive to electrons and holes independently, but requires electric fields in the sample. Here we report that multi-electrode devices can be wired to produce differential electron yield (DEY) contrast, which is also independently sensitive to electrons and holes, but does not require an electric field. Depending on whether the region illuminated by the focused STXM beam is better connected to one electrode or another, the DEY-STXM contrast changes sign. DEY-STXM images thus provide a vivid map of a device's connectivity landscape, which can be key to understanding device function and failure. To demonstrate an application in the area of failure analysis, we image a 100~nm, lithographically-defined aluminum nanowire that has failed after being stressed with a large current density. △ Less

Submitted 27 September, 2020; originally announced September 2020.

Comments: 8 pages, 6 figures

Electrical probing of COVID-19 spike protein receptor binding domain via a graphene field-effect transistor

Authors: Xiaoyan Zhang, Qige Qi, Qiushi **g, Shen Ao, Zhihong Zhang, Mingchao Ding, Muhong Wu, Kaihui Liu, Weipeng Wang, Yunhan Ling, Zhengjun Zhang, Wangyang Fu

Abstract: Here, in an effort towards facile and fast screening/diagnosis of novel coronavirus disease 2019 (COVID-19), we combined the unprecedently sensitive graphene field-effect transistor (Gr-FET) with highly selective antibody-antigen interaction to develop a coronavirus immunosensor. The Gr-FET immunosensors can rapidly identify (about 2 mins) and accurately capture the COVID-19 spike protein S1 (whic… ▽ More Here, in an effort towards facile and fast screening/diagnosis of novel coronavirus disease 2019 (COVID-19), we combined the unprecedently sensitive graphene field-effect transistor (Gr-FET) with highly selective antibody-antigen interaction to develop a coronavirus immunosensor. The Gr-FET immunosensors can rapidly identify (about 2 mins) and accurately capture the COVID-19 spike protein S1 (which contains a receptor binding domain, RBD) at a limit of detection down to 0.2 pM, in a real-time and label-free manner. Further results ensure that the Gr-FET immunosensors can be promisingly applied to screen for high-affinity antibodies (with binding constant up to 2*10^11 M^-1 against the RBD) at concentrations down to 0.1 pM. Thus, our developed electrical Gr-FET immunosensors provide an appealing alternative to address the early screening/diagnosis as well as the analysis and rational design of neutralizing-antibody locking methods of this ongoing public health crisis. △ Less

Submitted 27 March, 2020; originally announced March 2020.

Comments: 2 figures

Short-term oscillation and falling dynamics for a water drop drip** in quiescent air

Authors: Bo Zhang, Pei-Hsun Tsai, An-Bang Wang, Stéphane Popinet, Stéphane Zaleski, Yue Ling

Abstract: The short-term transient falling dynamics of a drip** water drop in quiescent air has been investigated through both simulation and experiment. The focus is on the short term behavior and the time range considered covers about eight dominant second-mode oscillations of the drop after it is formed. Due to the small fluid inertia the growth of the drop is quasi-static and is well captured by the s… ▽ More The short-term transient falling dynamics of a drip** water drop in quiescent air has been investigated through both simulation and experiment. The focus is on the short term behavior and the time range considered covers about eight dominant second-mode oscillations of the drop after it is formed. Due to the small fluid inertia the growth of the drop is quasi-static and is well captured by the static pendant drop theory. Nevertheless, the pinching dynamics and the resulting post-formation state of the drop trigger a nonlinear oscillation when the drop falls. The initial shape of the drop when it is just formed is decomposed into spherical harmonic modes. The pinching dynamics such as interface overturning introduces small-scale variation on the drop contour, which in turn contributes to the finite amplitudes of the higher-order modes. Furthermore, the initial kinetic energy when the droplet is just formed is as important as the initial surface energy contained in the drop shape, and is found to amplify the initial oscillation amplitude and to induce a phase shift in the oscillation of all the modes. By incorporating both the initial surface and kinetic energy, the linear model for a free drop oscillation yields very good predictions for the second and third modes. The mode amplitude spectra show both the primary frequencies that are consistent with the Lamb's theory and the secondary frequencies arising from different modes due to nonlinear inter-mode coupling. The complex transient flow inside and outside the drop is induced by the interaction between the falling motion and the nonlinear oscillation. The streamlines indicate that the internal flow is substantially different from the Hill vortex for a falling drop without oscillation. The temporal evolutions of both the internal flow and the wake morphology follow the dominant second oscillation mode. △ Less

Submitted 17 March, 2020; originally announced March 2020.

Journal ref: Physical Review Fluids 4, (2019) 123604

Modeling and Detailed Numerical Simulation of the Primary Breakup of a Gasoline Surrogate Jet under Non-Evaporative Operating Conditions

Authors: Bo Zhang, Stephane Popinet, Yue Ling

Abstract: In the present study, detailed numerical simulations are performed to investigate the primary breakup of a gasoline surrogate jet under non-evaporative "Spray G" operating conditions. The Spray G injector and operating conditions, developed by the Engine Combustion Network (ECN), represent the early phase of spray-guided gasoline injection. To focus the computational resources on resolving the pri… ▽ More In the present study, detailed numerical simulations are performed to investigate the primary breakup of a gasoline surrogate jet under non-evaporative "Spray G" operating conditions. The Spray G injector and operating conditions, developed by the Engine Combustion Network (ECN), represent the early phase of spray-guided gasoline injection. To focus the computational resources on resolving the primary breakup, simplifications have been made on the injector geometry. The effect of the internal flow on the primary breakup is modeled by specifying a nonzero injection angle at the inlet. The nonzero injection angle results in an increase of the jet penetration speed and also a deflection of the liquid jet. A parametric study on the injection angle is performed, and the numerical results are compared to the experimental data to identify the injection angle that best represents the Spray G conditions. The nonzero injection angle introduces an azimuthally non-uniform velocity in the liquid jet, which in turn influences the instability development on the jet surfaces and also the deformation and breakup of the jet head. The asymmetric primary breakup dynamics eventually lead to an azimuthal variation of droplet size distributions. The number of droplets varies significantly with the azimuthal angle, but interestingly, the probability density functions (PDF) of droplet size for different azimuthal angles collapse to a self-similar profile. Analysis has also been conducted to estimate the percentage and statistics of the tiny droplets that are under resolved in the present simulation. The PDF of the azimuthal angle is also presented, which is also shown to exhibit a self-similar form that varies little over time. Finally, a model is developed to predict the droplet number as a function of droplet diameter, azimuthal angle where a droplet is located, and time. △ Less

Submitted 28 May, 2020; v1 submitted 17 March, 2020; originally announced March 2020.

Beyond Fourier transform: super-resolving optical coherence tomography

Authors: Yuye Ling, Mengyuan Wang, Yu Gan, Xinwen Yao, Leopold Schmetterer, Chuanqing Zhou, Yikai Su

Abstract: Optical coherence tomography (OCT) is a volumetric imaging modality that empowers clinicians and scientists to noninvasively visualize the cross-sections of biological samples. As the latest generation of its kind, Fourier-domain OCT (FD-OCT) offers a micrometer-scale axial resolution by taking advantage of coherence gating. Based on the current theory, it is believed the only way to obtain a high… ▽ More Optical coherence tomography (OCT) is a volumetric imaging modality that empowers clinicians and scientists to noninvasively visualize the cross-sections of biological samples. As the latest generation of its kind, Fourier-domain OCT (FD-OCT) offers a micrometer-scale axial resolution by taking advantage of coherence gating. Based on the current theory, it is believed the only way to obtain a higher-axial-resolution OCT image is to physically extend the system's spectral bandwidth given a certain central wavelength. Here, we showed the belief is wrong. We proposed a novel reconstruction framework, which integrates prior knowledge and exploits the \emph{shift-variance}, to retrospectively super-resolve OCT images without altering the system configurations. Both numerical and experimental results confirmed the processed image manifested an axial resolution beyond the previous theoretical prediction. We believe this result not only opens new horizons for future research directions in OCT reconstruction but also promises an immediate upgrade to tens of thousands of legacy OCT units currently deployed. △ Less

Submitted 19 May, 2020; v1 submitted 9 January, 2020; originally announced January 2020.

Comments: 30 pages, 9 figures

Dispersion independent long-haul photon counting OTDR

Authors: Bin Li, Ruiming Zhang, Yong Wang, Hao Li, Lixing You, Zhonghua Ou, Heng Zhou, Yun Ling, Yunxiang Wang, Guangwei Deng, You Wang, Haizhi Song, Kun Qiu, Qiang Zhou

Abstract: Photon counting optical time-domain reflectometry (PC-OTDR) based on the single photon detection is an effective scheme to attain the high spatial resolution for optical fiber fault monitoring. Currently, due to the spatial resolution of PC-OTDR is proportional to the pulse width of a laser beam, short laser pulses are essential for the high spatial resolution. However, short laser pulses have a l… ▽ More Photon counting optical time-domain reflectometry (PC-OTDR) based on the single photon detection is an effective scheme to attain the high spatial resolution for optical fiber fault monitoring. Currently, due to the spatial resolution of PC-OTDR is proportional to the pulse width of a laser beam, short laser pulses are essential for the high spatial resolution. However, short laser pulses have a large bandwidth, which would be widened by the dispersion of fiber, thereby causing inevitable deterioration in spatial resolution, especially for long-haul fiber links. In this letter, we propose a scheme of dispersion independent PC-OTDR based on an infinite backscatter technique. Our experimental results -with more than 50 km long fiber - show that the spatial resolution of the PC-OTDR system is independent with the total dispersion of the fiber under test. Our method provides an avenue for develo** the long-haul PC-OTDR with high performance. △ Less

Submitted 28 October, 2019; originally announced October 2019.

Comments: 5 pages, 4 figures

Map** micron-scale wetting properties of superhydrophobic surfaces

Authors: Dan Daniel, Chee Leng Lay, Anqi Sng, Corryl **g Jun Lee, Darren Chi ** Neo, Xing Yi Ling, Nikodem Tomczak

Abstract: There is a huge interest in develo** super-repellent surfaces for anti-fouling and heat transfer applications. To characterize the wetting properties of such surfaces, the most common approach is to place a millimetric-sized droplet and measure its contact angles. The adhesion and friction forces can then be indirectly inferred from the Furmidge's relation. While easy to implement, contact angle… ▽ More There is a huge interest in develo** super-repellent surfaces for anti-fouling and heat transfer applications. To characterize the wetting properties of such surfaces, the most common approach is to place a millimetric-sized droplet and measure its contact angles. The adhesion and friction forces can then be indirectly inferred from the Furmidge's relation. While easy to implement, contact angle measurements are semi-quantitative and cannot resolve wetting variations on a surface. Here, we attach a micrometric-sized droplet to an Atomic Force Microscope cantilever to directly measure adhesion and friction forces with nanonewton force resolutions. We spatially map the micron-scale wetting properties of superhydrophobic surfaces and observe the time-resolved pinning-depinning dynamics as a droplet detaches from or moves across the surface. △ Less

Submitted 9 September, 2019; originally announced September 2019.

High Dynamic Range Externally Time-gated Photon Counting Optical Time-domain Reflectometry

Authors: Bin Li, Guangwei Deng, Ruiming Zhang, Zhonghua Ou, Heng Zhou, Yun Ling, Yunxiang Wang, You Wang, Kun Qiu, Haizhi Song, Qiang Zhou

Abstract: Single photon detector (SPD) has a maximum count rate due to its dead time, which results in that the dynamic range of photon counting optical time-domain reflectometry (PC-OTDR) de-creases with the length of monitored fiber. To further improve the dynamic range of PC-OTDR, we propose and demonstrate an externally time-gated scheme. The externally time-gated scheme is realized by using a high-spee… ▽ More Single photon detector (SPD) has a maximum count rate due to its dead time, which results in that the dynamic range of photon counting optical time-domain reflectometry (PC-OTDR) de-creases with the length of monitored fiber. To further improve the dynamic range of PC-OTDR, we propose and demonstrate an externally time-gated scheme. The externally time-gated scheme is realized by using a high-speed optical switch, i.e. a Mach-Zehnder interferometer, to modulate the back-propagation optical signal, and to allow that only a certain segment of the fiber is monitored by the SPD. The feasibility of proposed scheme is first examined with theoretical analysis and simulation; then we experimentally demonstrate it with our experimental PC-OTDR testbed operating at 800 nm wavelength band. In our studies, a dynamic range of 30.0 dB is achieved in a 70 meters long PC-OTDR system with 50 ns external gates, corresponding to an improvement of 11.0 dB in dynamic range comparing with no gating operation. Furthermore, with the improved dynamic range, a successful identification of a 0.37 dB loss event is detected with 30-seconds accumulation, which could not be identified without gating operation. Our scheme paves an avenue for develo** PC-OTDR systems with high dynamic range. △ Less

Submitted 21 July, 2019; v1 submitted 11 July, 2019; originally announced July 2019.

Comments: 7 pages,8 figures

A phase inversion benchmark for multiscale multiphase flows

Authors: J. -L. Estivalezes, W. Aniszewski, F. Auguste, Y. Ling, L. Osmar, J. -P. Caltagirone, L. Chirco, A. Pedrono, S. Popinet, A. Berlemont, J. Magnaudet, T. Menard, S. Vincent, S. Zaleski

Abstract: A series of benchmarks based on the physical situation of "phase inversion" between two immiscible liquids is presented. These benchmarks aim at progressing toward the direct numerical simulation of two-phase flows. Several CFD codes developed in French laboratories and using either Volume-of-Fluid or Level-Set interface tracking methods are used to provide physical solutions of the benchmarks, co… ▽ More A series of benchmarks based on the physical situation of "phase inversion" between two immiscible liquids is presented. These benchmarks aim at progressing toward the direct numerical simulation of two-phase flows. Several CFD codes developed in French laboratories and using either Volume-of-Fluid or Level-Set interface tracking methods are used to provide physical solutions of the benchmarks, convergence studies and code comparisons. Two typical configurations are retained, with integral scale Reynolds numbers of 13.700 and 433.000, respectively. The physics of the problem are probed through macroscopic quantities such as potential and kinetic energies, or enstrophy. In addition, scaling laws for the temporal decay of the kinetic energy are derived to check the physical relevance of the simulations. Finally the droplet size distribution is probed. Additional test problems are also reported to estimate the influence of viscous effects in the vicinity of the interface. △ Less

Submitted 17 October, 2021; v1 submitted 6 June, 2019; originally announced June 2019.

Comments: 35 pages, 35 figures, third revision submitted to J. Comput. Phys

Probing plasmon-NV$^0$ coupling at the nanometer scale with photons and fast electrons

Authors: H. Lourenço-Martins, M. Kociak, S. Meuret, F. Treussart, Yih Hong Lee, Xing Yi Ling, H. C. Chang, L. H. G. Tizei

Abstract: The local density of optical states governs an emitters lifetime and quantum yield through the Purcell effect. It can be modified by a surface plasmon electromagnetic field, but such a field has a spatial extension limited to a few hundreds of nanometers, which complicates the use of optical methods to spatially probe the emitter-plasmon coupling. Here we show that a combination of electron-based… ▽ More The local density of optical states governs an emitters lifetime and quantum yield through the Purcell effect. It can be modified by a surface plasmon electromagnetic field, but such a field has a spatial extension limited to a few hundreds of nanometers, which complicates the use of optical methods to spatially probe the emitter-plasmon coupling. Here we show that a combination of electron-based imaging, spectroscopies and photon-based correlation spectroscopy enables measurement of the Purcell effect with nanometer and nanosecond spatio-temporal resolutions. Due to the large variability of radiative lifetimes of emitters embedded in nanoparticles with inhomogeneous sizes we relied on a statistical approach to unambiguously probe the coupling between nitrogen-vacancy centers (NV^0) in nanodiamonds and surface plasmons in silver nanocubes. We quantified the Purcell effect by measuring the NV^0 excited state lifetimes in a large number of either isolated nanodiamonds or nanodiamond-nanocube dimers and demonstrated a statistically significant lifetime reduction for dimers. △ Less

Submitted 2 June, 2019; originally announced June 2019.

Journal ref: Hugo Lourenco-Martins, et al, ACS Photonics, 5, 324 (2018)

A mass-momentum consistent, Volume-of-Fluid method for incompressible flow on staggered grids

Authors: T. Arrufat, M. Crialesi-Esposito, D. Fuster, Y. Ling, L. Malan, S. Pal, R. Scardovelli, G. Tryggvason, S. Zaleski

Abstract: The computation of flows with large density contrasts is notoriously difficult. To alleviate the difficulty we consider a discretization of the Navier-Stokes equation that advects mass and momentum in a consistent manner. Incompressible flow with capillary forces is modeled and the discretization is performed on a staggered grid of Marker and Cell type. The Volume-of-Fluid method is used to track… ▽ More The computation of flows with large density contrasts is notoriously difficult. To alleviate the difficulty we consider a discretization of the Navier-Stokes equation that advects mass and momentum in a consistent manner. Incompressible flow with capillary forces is modeled and the discretization is performed on a staggered grid of Marker and Cell type. The Volume-of-Fluid method is used to track the interface and a Height-Function method is used to compute surface tension. The advection of the volume fraction is performed using either the Lagrangian-Explicit / CIAM (Calcul d'Interface Affine par Morceaux) method or the Weymouth and Yue (WY) Eulerian-Implicit method. The WY method conserves fluid mass to machine accuracy provided incompressibility is satisfied. To improve the stability of these methods momentum fluxes are advected in a manner "consistent" with the volume-fraction fluxes, that is a discontinuity of the momentum is advected at the same speed as a discontinuity of the density. To find the density on the staggered cells on which the velocity is centered, an auxiliary reconstruction of the density is performed. The method is tested for a droplet without surface tension in uniform flow, for a droplet suddenly accelerated in a carrying gas at rest at very large density ratio without viscosity or surface tension, for the Kelvin-Helmholtz instability, for a 3mm-diameter falling raindrop and for an atomizing flow in air-water conditions. △ Less

Submitted 24 February, 2021; v1 submitted 29 November, 2018; originally announced November 2018.

Journal ref: Computers & Fluids 215 (2021): 104785

A two-phase mixing layer between parallel gas and liquid streams: multiphase turbulence statistics and influence of interfacial instability

Authors: Y. Ling, D. Fuster, G. Tryggvason, S. Zaleski

Abstract: The two-phase mixing layer formed between parallel gas and liquid streams is an important fundamental problem in turbulent multiphase flows. The problem is relevant to many industrial applications and natural phenomena, such as air-blast atomizers in fuel injection systems and breaking waves in the ocean. The velocity difference between the gas and liquid streams triggers an interfacial instabilit… ▽ More The two-phase mixing layer formed between parallel gas and liquid streams is an important fundamental problem in turbulent multiphase flows. The problem is relevant to many industrial applications and natural phenomena, such as air-blast atomizers in fuel injection systems and breaking waves in the ocean. The velocity difference between the gas and liquid streams triggers an interfacial instability which can be convective or absolute depending on the stream properties and injection parameters. In the present study, a direct numerical simulation of a two-phase gas-liquid mixing layer that lie in the absolute instability regime is conducted. A dominant frequency is observed in the simulation and the numerical result agrees well with the prediction from viscous stability theory. As the interfacial wave plays a critical role in turbulence transition and development, the temporal evolution of turbulent fluctuations (such as the enstrophy) also exhibits a similar frequency. In order to investigate the statistical response of the multiphase turbulence flow, the simulation has been run for a long physical time so that time-averaging can be performed to yield the statistically converged results for Reynolds stresses and the turbulent kinetic energy (TKE) budget. An extensive mesh refinement study using from 8 million to about 4 billions cells has been carried out. The turbulent dissipation is shown to be highly demanding on mesh resolution compared to other terms in TKE budget. The results obtained with the finest mesh are shown to be not far from converged results of turbulent dissipation which allow us to obtain estimations of the Kolmogorov and Hinze scales. The computed Hinze scale is significantly larger than the size of droplets observed and does not seem to be a relevant length scale to describe the smallest size of droplets formed in atomization. △ Less

Submitted 6 August, 2018; originally announced August 2018.

Terabit optical OFDM superchannel transmission via coherent carriers of a hybrid chip-scale soliton frequency comb

Authors: Yong Geng, Xiatao Huang, Wenwen Cui, Yun Ling, Bo Xu, ** Zhang, Xingwen Yi, Baojian Wu, Shu-Wei Huang, Kun Qiu, Chee Wei Wong, Heng Zhou

Abstract: We demonstrate seamless channel multiplexing and high bitrate superchannel transmission of coherent optical orthogonal-frequency-division-multiplexing (CO-OFDM) data signals utilizing a dissipative Kerr soliton (DKS) frequency comb generated in an on-chip microcavity. Aided by comb line multiplication through Nyquist pulse modulation, the high stability and mutual coherence among mode-locked Kerr… ▽ More We demonstrate seamless channel multiplexing and high bitrate superchannel transmission of coherent optical orthogonal-frequency-division-multiplexing (CO-OFDM) data signals utilizing a dissipative Kerr soliton (DKS) frequency comb generated in an on-chip microcavity. Aided by comb line multiplication through Nyquist pulse modulation, the high stability and mutual coherence among mode-locked Kerr comb lines are exploited for the first time to eliminate the guard intervals between communication channels and achieve full spectral density bandwidth utilization. Spectral efficiency as high as 2.625 bit/Hz/s is obtained for 180 CO-OFDM bands encoded with 12.75 Gbaud 8-QAM data, adding up to total bitrate of 6.885 Tb/s within 2.295 THz frequency comb bandwidth. Our study confirms that high coherence is the key superiority of Kerr soliton frequency combs over independent laser diodes, as a multi-spectral coherent laser source for high-bandwidth high-spectral-density transmission networks. △ Less

Submitted 27 April, 2018; originally announced May 2018.

Comments: 5 pages, 3 figures

Direct Numerical Simulations of pore competition in idealized micro-spall using the VOF method

Authors: L. C. Malan, Y. Ling, R. Scardovelli, A. Llor, S. Zaleski

Abstract: Under shock loading, metals have been found to melt and with reflection of the shock wave from the material free surface, cavities nucleate and grow. This process is referred to as micro spall and has been studied experimentally with analytical models describing debris sizes. Measurements during the cavity growth phase are not possible at present and we present here the Direct Numerical Simulation… ▽ More Under shock loading, metals have been found to melt and with reflection of the shock wave from the material free surface, cavities nucleate and grow. This process is referred to as micro spall and has been studied experimentally with analytical models describing debris sizes. Measurements during the cavity growth phase are not possible at present and we present here the Direct Numerical Simulation of an idealized problem where we assume an inviscid, incompressible liquid subject to a constant expansion rate with cavities at a vanishing vapour pressure. In order to allow for a time-varying gas volume a free-surface interface condition has been implemented in an existing incompressible multiphase Navier-Stokes solver, PARIS Simulator, using a volume-of-fluid method. The gas flow remains unsolved and is instead assumed to have a fixed pressure which is applied to the liquid through a Dirichlet boundary condition on the arbitrary liquid-gas interface. Gas bubbles are tracked individually, allowing the gas pressure to be prescribed using a suitable equation of state. Simulations with hundreds of bubbles have been performed in a fixed domain under a constant rate of expansion. A bubble competition is observed: larger bubbles tend to expand more rapidly at the demise of smaller ones. The time scale of competition is shown to depend on a modified Weber number. △ Less

Submitted 13 November, 2017; originally announced November 2017.

Droplet migration in a Hele-Shaw cell: Effect of the lubrication film on the droplet dynamics

Authors: Yue Ling, Jose-Maria Fullana, Stéphane Popinet, Christophe Josserand

Abstract: Droplet migration in a Hele--Shaw cell is a fundamental multiphase flow problem which is crucial for many microfluidics applications. We focus on the regime at low capillary number and three-dimensional direct numerical simulations are performed to investigate the problem. In order to reduce the computational cost, an adaptive mesh is employed and high mesh resolution is only used near the interfa… ▽ More Droplet migration in a Hele--Shaw cell is a fundamental multiphase flow problem which is crucial for many microfluidics applications. We focus on the regime at low capillary number and three-dimensional direct numerical simulations are performed to investigate the problem. In order to reduce the computational cost, an adaptive mesh is employed and high mesh resolution is only used near the interface. Parametric studies are performed on the droplet horizontal radius and the capillary number. For droplets with an horizontal radius larger than half the channel height the droplet overfills the channel and exhibits a pancake shape. A lubrication film is formed between the droplet and the wall and particular attention is paid to the effect of the lubrication film on the droplet velocity. The computed velocity of the pancake droplet is shown to be lower than the average inflow velocity, which is in agreement with experimental measurements. The numerical results show that both the strong shear induced by the lubrication film and the three-dimensional flow structure contribute to the low mobility of the droplet. In this low-migration-velocity scenario the interfacial flow in the droplet reference frame moves toward the rear on the top and reverses direction moving to the front from the two side edges. The velocity of the pancake droplet and the thickness of the lubrication film are observed to decrease with capillary number. The droplet velocity and its dependence on capillary number cannot be captured by the classic Hele--Shaw equations, since the depth-averaged approximation neglects the effect of the lubrication film. △ Less

Submitted 18 May, 2016; v1 submitted 26 January, 2016; originally announced January 2016.

Spray formation: a numerical closeup

Authors: Yue Ling, Daniel Fuster, Gretar Tryggvason, Stephane Zaleski

Abstract: Spray formation and atomization in a gas-liquid mixing layer is an important fundamental problem of multiphase flows. It is highly desirable to visualize the detailed atomization process and to analyze the instabilities and mechanisms involved, and massive numerical simulations are required, in addition to experiment. Rapid development of numerical methods and computer technology in the past decad… ▽ More Spray formation and atomization in a gas-liquid mixing layer is an important fundamental problem of multiphase flows. It is highly desirable to visualize the detailed atomization process and to analyze the instabilities and mechanisms involved, and massive numerical simulations are required, in addition to experiment. Rapid development of numerical methods and computer technology in the past decades now allows large-scale three-dimensional direct numerical simulations of atomization to be performed. Nevertheless, the fundamental question, whether all the physical scales involved in the primary breakup process are faithfully resolved, remains unclear. In the present study, we conduct direct numerical simulations of spray formation in a gas-liquid mixing layer with state-of-the-art computational resources (using up to 4 billion cells and 16384 cores), in order to obtain a high-fidelity numerical closeup of the detailed mechanisms of spray formation. We also aim to examine whether present computational resources are sufficient for a fully resolved direct numerical simulation of atomization. △ Less

Submitted 11 July, 2016; v1 submitted 13 November, 2015; originally announced November 2015.

Journal ref: Phys. Rev. Fluids 2, 014005 (2017)

Stable Matching with Incomplete Information in Structured Networks

Authors: Ying Ling, Tao Wan, Zengchang Qin

Abstract: In this paper, we investigate stable matching in structured networks. Consider case of matching in social networks where candidates are not fully connected. A candidate on one side of the market gets acquaintance with which one on the heterogeneous side depends on the structured network. We explore four well-used structures of networks and define the social circle by the distance between each cand… ▽ More In this paper, we investigate stable matching in structured networks. Consider case of matching in social networks where candidates are not fully connected. A candidate on one side of the market gets acquaintance with which one on the heterogeneous side depends on the structured network. We explore four well-used structures of networks and define the social circle by the distance between each candidate. When matching within social circle, we have equilibrium distinguishes from each other since each social network's topology differs. Equilibrium changes with the change on topology of each network and it always converges to the same stable outcome as complete information algorithm if there is no block to reach anyone in agent's social circle. △ Less

Submitted 25 October, 2015; originally announced October 2015.

Comments: 13 pages; 6 figures

Droplet in micro-channels: A numerical approach using an adaptive two phase flow solver

Authors: Jose-Maria Fullana, Yue Ling, Stéphane Popinet, Christophe Josserand

Abstract: We propose a numerical approach to study the mechanics of a flowing bubble in a constraint micro channel. Using an open source two phase flow solver (Gerris, gfs.sourceforge.net) we compute solutions of the bubble dynamics (i.e. shape and terminal velocity) induced by the interaction between the bubble movement, the Laplace pressure variation, and the lubrication film near the channel wall. Quanti… ▽ More We propose a numerical approach to study the mechanics of a flowing bubble in a constraint micro channel. Using an open source two phase flow solver (Gerris, gfs.sourceforge.net) we compute solutions of the bubble dynamics (i.e. shape and terminal velocity) induced by the interaction between the bubble movement, the Laplace pressure variation, and the lubrication film near the channel wall. Quantitative and qualitative results are presented and compared against both theory and experimental data for small Capillary numbers. We discuss the technical issues of explicit integration methods on small Capillary numbers computations, and the possibility of adding Van der Walls forces to give a more precise picture of the Droplet-based microfluidic problem. △ Less

Submitted 15 July, 2015; originally announced July 2015.

Comments: in 1st Pan-American Congress on Computational Mechanics - PANACM 2015, 2015, Buenos Aires, Argentina

Electroneutrality Breakdown and Specific Ion Effects in Nanoconfined Aqueous Electrolytes Observed by NMR

Authors: Zhi-Xiang Luo, Yun-Zhao Xing, Yan-Chun Ling, Alfred Kleinhammes, Yue Wu

Abstract: Ion distribution in aqueous electrolytes near the interface plays critical roles in electrochemical, biological and colloidal systems and is expected to be particularly significant inside nanoconfined regions. Electroneutrality of the total charge inside nanoconfined regions is commonly assumed a priori in solving ion distribution of aqueous electrolytes nanoconfined by uncharged hydrophobic surfa… ▽ More Ion distribution in aqueous electrolytes near the interface plays critical roles in electrochemical, biological and colloidal systems and is expected to be particularly significant inside nanoconfined regions. Electroneutrality of the total charge inside nanoconfined regions is commonly assumed a priori in solving ion distribution of aqueous electrolytes nanoconfined by uncharged hydrophobic surfaces with no direct experimental validation. Here, we use a quantitative nuclear magnetic resonance approach to investigate the properties of aqueous electrolytes nanoconfined in graphitic-like nanoporous carbon. Substantial electroneutrality breakdown in nanoconfined regions and very asymmetric responses of cations and anions to the charging of nanoconfining surfaces are observed. The electroneutrality breakdown is shown to depend strongly on the propensity of anions toward the water-carbon interface and such ion-specific response follows generally the anion ranking of the Hofmeister series. The experimental observations are further supported by numerical evaluation using the generalized Poisson-Boltzmann equation △ Less

Submitted 24 February, 2015; originally announced February 2015.

Comments: 26 pages, 3 figures

Journal ref: Nature Communications, 6 (2015)

On the distribution of DNA translocation times in solid-state nanopores: an analysis using Schrodinger's first-passage-time theory

Authors: Daniel Y. Ling, X. S. Ling

Abstract: In this short note, a correction is made to the recently proposed solution [1] to a 1D biased diffusion model for linear DNA translocation and a new analysis will be given to the data in [1]. It was pointed out [2] by us recently that this 1D linear translocation model is equivalent to the one that was considered by Schrodinger [3] for the Enrenhaft-Millikan measurements [4,5] on electron charge.… ▽ More In this short note, a correction is made to the recently proposed solution [1] to a 1D biased diffusion model for linear DNA translocation and a new analysis will be given to the data in [1]. It was pointed out [2] by us recently that this 1D linear translocation model is equivalent to the one that was considered by Schrodinger [3] for the Enrenhaft-Millikan measurements [4,5] on electron charge. Here we apply Schrodinger's first-passage-time distribution formula to the data set in [1]. It is found that Schrodinger's formula can be used to describe the time distribution of DNA translocation in solid-state nanopores. These fittings yield two useful parameters: drift velocity of DNA translocation and diffusion constant of DNA inside the nanopore. The results suggest two regimes of DNA translocation: (I) at low voltages, there are clear deviations from Smoluchowski's linear law of electrophoresis [6] which we attribute to the entropic barrier effects; (II) at high voltages, the translocation velocity is a linear function of the applied electric field. In regime II, the apparent diffusion constant exhibits a quadratic dependence on applied electric field, suggesting a mechanism of Taylor dispersion effect likely due the electro-osmotic flow field in the nanopore channel. This analysis yields a dispersion-free diffusion constant value for the segment of DNA inside the nanopore which is in agreement with Stokes-Einstein theory quantitatively. The implication of Schrodinger's formula for DNA sequencing is discussed. △ Less

Submitted 5 August, 2013; v1 submitted 10 June, 2013; originally announced June 2013.

Comments: 15 pages, 3 figures. To appear in J. Phys.: Cond. Matt

Journal ref: J. Phys.: Condens. Matter 25, 375102 (2013)

Calibration of multi-physics computational models using Bayesian networks

Authors: You Ling, Joshua Mullins, Sankaran Mahadevan

Abstract: This paper develops a Bayesian network-based method for the calibration of multi-physics models, integrating various sources of uncertainty with information from computational models and experimental data. We adopt the Kennedy and O'Hagan (KOH) framework for model calibration under uncertainty, and develop extensions to multi-physics models and various scenarios of available data. Both aleatoric u… ▽ More This paper develops a Bayesian network-based method for the calibration of multi-physics models, integrating various sources of uncertainty with information from computational models and experimental data. We adopt the Kennedy and O'Hagan (KOH) framework for model calibration under uncertainty, and develop extensions to multi-physics models and various scenarios of available data. Both aleatoric uncertainty (due to natural variability) and epistemic uncertainty (due to lack of information, including data uncertainty and model uncertainty) are accounted for in the calibration process. Challenging aspects of Bayesian calibration for multi-physics models are investigated, including: (1) calibration with different forms of experimental data (e.g., interval data and time series data), (2) determination of the identifiability of model parameters when the analytical expression of model is known or unknown, (3) calibration of multiple physics models sharing common parameters, which enables efficient use of data especially when the experimental resources are limited. A first-order Taylor series expansion-based method is proposed to determine which model parameters are identifiable. Following the KOH framework, a probabilistic discrepancy function is estimated and added to the prediction of the calibrated model, attempting to account for model uncertainty. This discrepancy function is modeled as a Gaussian process when sufficient data are available for multiple model input combinations, and is modeled as a random variable when the available data are limited. The overall approach is illustrated using two application examples related to microelectromechanical system (MEMS) devices: (1) calibration of a dielectric charging model with time-series data, and (2) calibration of two physics models (pull-in voltage and creep) using measurements of different physical quantities in different devices. △ Less

Submitted 21 June, 2012; originally announced June 2012.

Comments: 38 pages, 10 figures, Submitted to the Journal of Computational Physics on May 3, 2012

Quantitative model validation techniques: new insights

Authors: You Ling, Sankaran Mahadevan

Abstract: This paper develops new insights into quantitative methods for the validation of computational model prediction. Four types of methods are investigated, namely classical and Bayesian hypothesis testing, a reliability-based method, and an area metric-based method. Traditional Bayesian hypothesis testing is extended based on interval hypotheses on distribution parameters and equality hypotheses on p… ▽ More This paper develops new insights into quantitative methods for the validation of computational model prediction. Four types of methods are investigated, namely classical and Bayesian hypothesis testing, a reliability-based method, and an area metric-based method. Traditional Bayesian hypothesis testing is extended based on interval hypotheses on distribution parameters and equality hypotheses on probability distributions, in order to validate models with deterministic/stochastic output for given inputs. Two types of validation experiments are considered - fully characterized (all the model/experimental inputs are measured and reported as point values) and partially characterized (some of the model/experimental inputs are not measured or are reported as intervals). Bayesian hypothesis testing can minimize the risk in model selection by properly choosing the model acceptance threshold, and its results can be used in model averaging to avoid Type I/II errors. It is shown that Bayesian interval hypothesis testing, the reliability-based method, and the area metric-based method can account for the existence of directional bias, where the mean predictions of a numerical model may be consistently below or above the corresponding experimental observations. It is also found that under some specific conditions, the Bayes factor metric in Bayesian equality hypothesis testing and the reliability-based metric can both be mathematically related to the p-value metric in classical hypothesis testing. Numerical studies are conducted to apply the above validation methods to gas dam** prediction for radio frequency (RF) microelectromechanical system (MEMS) switches. The model of interest is a general polynomial chaos (gPC) surrogate model constructed based on expensive runs of a physics-based simulation model, and validation data are collected from fully characterized experiments. △ Less

Submitted 21 June, 2012; originally announced June 2012.

Comments: 40 pages, 9 figures. Submitted to Reliability Engineering and System Safety on Dec 10, 2011