-
The Source Regions of Whistlers
Authors:
Dávid Koronczay,
János Lichtenberger,
Mark A. Clilverd,
Craig J. Rodger,
Stefan I. Lotz,
Dmitry V. Sannikov,
Nina V. Cherneva,
Tero Raita,
Fabien Darrouzet,
Robert C. Moore
Abstract:
We present a new method for identifying the source regions of lightning generated whistlers observed at a fixed location. In addition to the spatial distribution of causative lightning discharges, we calculate the transmission ratio of lightning discharges into ground detectable whistlers as a function of location. Our method relies on the time of the whistlers and the time and source location of…
▽ More
We present a new method for identifying the source regions of lightning generated whistlers observed at a fixed location. In addition to the spatial distribution of causative lightning discharges, we calculate the transmission ratio of lightning discharges into ground detectable whistlers as a function of location. Our method relies on the time of the whistlers and the time and source location of spherics from a global lightning database. We apply this method to whistlers recorded at fifteen ground based stations in the AWDANet (Automatic Whistler Detector and Analyzer Network) operating between 2007-2018 and to located lightning strokes from the WWLLN (World Wide Lightning Location Network) database. We present the obtained maps of causative lightning and transmission ratios. Our results show that the source region of whistlers corresponding to each ground station is around the magnetic conjugate point of the respective station. The size of the source region is typically less than 2000 km in radius with a small fraction of sources extending to up to 3500 km. The transmission ratio is maximal at the conjugate point and decreases with increasing distance from it. This conforms to the theory that whistlers detected on the ground propagated in a ducted mode through the plasmasphere and thus the lightning strokes of their causative spherics must cluster around the footprint of the ducts in the other hemisphere. Our method applied resolves the whistler excitation region mystery that resulted from correlation-based analysis methods, concerning the source region of whistlers detected in Dunedin, New Zealand.
△ Less
Submitted 31 January, 2019; v1 submitted 15 January, 2019;
originally announced January 2019.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Evaluation of plasma properties from chorus waves observed at the generation region
Authors:
Lilla Juhász,
Yoshiharu Omura,
János Lichtenberger,
Reinhard H. Friedel
Abstract:
In this study we present an inversion method which provides thermal plasma population parameters from characteristics of chorus emissions only. Our ultimate goal is to apply this method to ground based data in order to derive the lower energy boundary condition for many radiation belt models. The first step is to test the chorus-inversion method on in-situ data of Van Allen Probes in the generatio…
▽ More
In this study we present an inversion method which provides thermal plasma population parameters from characteristics of chorus emissions only. Our ultimate goal is to apply this method to ground based data in order to derive the lower energy boundary condition for many radiation belt models. The first step is to test the chorus-inversion method on in-situ data of Van Allen Probes in the generation region. Density and thermal velocity of energetic electrons (few keV - 100 keV) are derived from frequency sweep rate and starting frequencies of chorus emissions through analysis of wave data from Electric and Magnetic Field Instrument Suite and Integrated Science (EMFISIS) onboard the Van Allen Probes. Nonlinear wave growth theory of \citet{omura2011triggering} serves as the basis for our inversion method, assuming that the triggering wave is originated by the linear cyclotron instability. We present sixteen, consecutive rising-tone emissions recorded in the generation region between 11-12UT on 14 November 2012. The results of the inversion are compared with density and thermal velocities (parallel and perpendicular) of energetic electrons derived from unidirectional flux data of Helium Oxygen Proton Electron (HOPE) instrument, showing a good agreement: the normalized root-mean-square deviation between the measured and predicted values are $\sim13\%, \sim6\%$, and $\sim10\%$, respectively. We found that the theoretical amplitudes are consistent with the measured ones. The relation between linear and nonlinear wave growth agrees with our basic assumption, namely, linear growth is a preceding process of nonlinear wave growth. We analyze electron distributions at the relativistic resonant energy ranges.
△ Less
Submitted 23 November, 2018;
originally announced November 2018.
-
VLF transmitters as tools for monitoring the plasmasphere
Authors:
David Koronczay,
Janos Lichtenberger,
Lilla Juhasz,
Peter Steinbach,
George Hospodarsky
Abstract:
Continuous burst mode VLF measurements were recorded on the RBSP/Van Allen Probes satellites and are analyzed to detect pulses from the Russian Alpha (RSDN-20) ground-based navigational system. Based on the wave characteristics of these pulses and on the position of the spacecraft, the signals propagated mostly in ducted mode in the plasmasphere. Knowledge of the propagation path allowed us to car…
▽ More
Continuous burst mode VLF measurements were recorded on the RBSP/Van Allen Probes satellites and are analyzed to detect pulses from the Russian Alpha (RSDN-20) ground-based navigational system. Based on the wave characteristics of these pulses and on the position of the spacecraft, the signals propagated mostly in ducted mode in the plasmasphere. Knowledge of the propagation path allowed us to carry out a monochromatic wave propagation inversion to obtain plasmaspheric electron densities. We compared the obtained densities with independent in-situ measurements on the spacecraft. The results show good agreement, validating our inversion process. This contributes to validating the field-aligned density profile model routinely used in the inversion of whistlers detected on the ground. Furthermore, our method can provide electron densities at regimes where no alternative measurements are available on the spacecraft. This raises the possibility of using this method as an additional tool to measure and monitor plasmaspheric electron densities.
△ Less
Submitted 1 November, 2018; v1 submitted 4 July, 2018;
originally announced July 2018.
-
Searching for electromagnetic counterpart of LIGO gravitational waves in the Fermi GBM data with ADWO
Authors:
Z. Bagoly,
D. Szécsi,
L. G. Balázs,
I. Csabai,
I. Horváth,
L. Dobos,
J. Lichtenberger,
L. V. Tóth
Abstract:
The Fermi collaboration identified a possible electromagnetic counterpart of the gravitational wave event of September 14, 2015. Our goal is to provide an unsupervised data analysis algorithm to identify similar events in Fermi's Gamma-ray Burst Monitor CTTE data stream. We are looking for signals that are typically weak. Therefore, they can only be found by a careful analysis of count rates of al…
▽ More
The Fermi collaboration identified a possible electromagnetic counterpart of the gravitational wave event of September 14, 2015. Our goal is to provide an unsupervised data analysis algorithm to identify similar events in Fermi's Gamma-ray Burst Monitor CTTE data stream. We are looking for signals that are typically weak. Therefore, they can only be found by a careful analysis of count rates of all detectors and energy channels simultaneously. Our Automatized Detector Weight Optimization (ADWO) method consists of a search for the signal, and a test of its significance. We developed ADWO, a virtual detector analysis tool for multi-channel multi-detector signals, and performed successful searches for short transients in the data-streams. We have identified GRB150522B, as well as possible electromagnetic candidates of the transients GW150914 and LVT151012. ADWO is an independently developed, unsupervised data analysis tool that only relies on the raw data of the Fermi satellite. It can therefore provide a strong, independent test to any electromagnetic signal accompanying future gravitational wave observations.
△ Less
Submitted 24 August, 2016; v1 submitted 21 March, 2016;
originally announced March 2016.
-
Probability density functions for the variable solar wind near the solar cycle minimum
Authors:
Vörös,
Z.,
M. Leitner,
Y. Narita,
G. Consolini,
P. Kovács,
A. Tóth,
J. Lichtenberger
Abstract:
Unconditional and conditional statistics is used for studying the histograms of magnetic field multi-scale fluctuations in the solar wind near the solar cycle minimum in 2008. The unconditional statistics involves the magnetic data during the whole year 2008. The conditional statistics involves the magnetic field time series splitted into concatenated subsets of data according to a threshold in dy…
▽ More
Unconditional and conditional statistics is used for studying the histograms of magnetic field multi-scale fluctuations in the solar wind near the solar cycle minimum in 2008. The unconditional statistics involves the magnetic data during the whole year 2008. The conditional statistics involves the magnetic field time series splitted into concatenated subsets of data according to a threshold in dynamic pressure. The threshold separates fast stream leading edge compressional and trailing edge uncompressional fluctuations. The histograms obtained from these data sets are associated with both large-scale (B) and small-scale (δB) magnetic fluctuations, the latter corresponding to time-delayed differences. It is shown here that, by kee** flexibility but avoiding the unnecessary redundancy in modeling, the histograms can be effectively described by a limited set of theoretical probability distribution functions (PDFs), such as the normal, log-normal, kappa and logkappa functions. In a statistical sense the model PDFs correspond to additive and multiplicative processes exhibiting correlations. It is demonstrated here that the skewed small-scale histograms inherent in turbulent cascades are better described by the skewed log-kappa than by the symmetric kappa model. Nevertheless, the observed skewness is rather small, resulting in potential difficulties of estimation of the third-order moments. This paper also investigates the dependence of the statistical convergence of PDF model parameters, goodness of fit and skewness on the data sample size. It is shown that the minimum lengths of data intervals required for the robust estimation of parameters is scale, process and model dependent.
△ Less
Submitted 30 September, 2015;
originally announced September 2015.
