-
Piezoresistive snap-through detection for bifurcation-based MEMS sensors
Authors:
Ivan Litvinov,
Gal Spaer Milo,
Alexander Liberzon,
Slava Krylov
Abstract:
We report on the piezoresistive method for detecting stability loss events in microelectromechanical (MEMS) sensors based on bifurcation. The method involves measuring the resistivity changes of an entire beam to detect snap-through transitions in an electrostatically actuated, bistable double-clamped crystalline Silicon (Si) microbeam. The applicability of the suggested approach in two types of s…
▽ More
We report on the piezoresistive method for detecting stability loss events in microelectromechanical (MEMS) sensors based on bifurcation. The method involves measuring the resistivity changes of an entire beam to detect snap-through transitions in an electrostatically actuated, bistable double-clamped crystalline Silicon (Si) microbeam. The applicability of the suggested approach in two types of sensors - an ambient air temperature sensor or a mean air velocity sensor, is demonstrated. In both cases the bistable beam, serving as the sensing element, is affected by the electrothermal Joule's heating and air cooling. The measured signal is obtained by monitoring the critical voltages of the snap-through transitions. Piezoresistive sensing is especially suitable for the response monitoring of the exposed to the environment, free-standing heated microbeam sensors, where optical, piezoelectric, or electrostatic interrogation methods are not applicable. The approach can be implemented in various bifurcation microsensors and for response monitoring of bistable actuators.
△ Less
Submitted 26 May, 2024; v1 submitted 24 December, 2023;
originally announced December 2023.
-
Effect of Overheat and Direct Flow Loading on the MEMS Bistable Flow Sensor
Authors:
Ivan Litvinov,
Dan Refaeli,
Alex Liberzon,
Slava Krylov
Abstract:
We present the findings from an experimental study of a MEMS flow sensor in which an initially curved, double-clamped bistable microbeam is the primary sensing element. Our research explores how the overheat ratio, direct flow loading, and turbulence-induced vibration affect the sequential snap-through (ST) buckling and snap-back (SB) release of an electrostatically actuated beam heated by an elec…
▽ More
We present the findings from an experimental study of a MEMS flow sensor in which an initially curved, double-clamped bistable microbeam is the primary sensing element. Our research explores how the overheat ratio, direct flow loading, and turbulence-induced vibration affect the sequential snap-through (ST) buckling and snap-back (SB) release of an electrostatically actuated beam heated by an electric current. The sensor is fabricated from highly doped single-crystal silicon using a silicon-on-insulator (SOI) wafer. Positioned at the chip's edge, the microbeam is exposed to airflow, enabling concurrent dynamic response measurements with a laser Doppler vibrometer and a video camera. Our research demonstrates that the overheat ratio can be significantly lower for this sensing principle than conventional thermal sensing elements, pointing to the potential for substantial energy savings. We also emphasize the significant impact of flow angles and vibrations on the critical ST and SB voltages, which are vital for the flow sensor's output. Additionally, we introduce the first direct experimental observation of the beam profile's time history during the snap-through /snap-back transition. The potential impact of this research lies in develo** more robust MEMS flow sensors with enhanced sensitivity and a better understanding of their response to environmental factors, which could have broader applications in fields such as aerospace, environmental monitoring, and industrial process control.
△ Less
Submitted 26 May, 2024; v1 submitted 20 December, 2023;
originally announced December 2023.
-
On local isotropy and scale dependence of pair dispersion in turbulent canopy flows
Authors:
Ron Shnapp,
Alex Liberzon,
Yardena Bohbot-Raviv,
Eyal Fattal
Abstract:
Canopy flows in the atmospheric surface layer play important economic and ecological roles, governing the dispersion of passive scalars in the environment. The interaction of high-velocity fluid and large-scale surface-mounted obstacles in canopy flows produces drag and causes intense, inhomogeneous, and anisotropic turbulence. In this work, we focus on the turbulent dispersion of passive scalars…
▽ More
Canopy flows in the atmospheric surface layer play important economic and ecological roles, governing the dispersion of passive scalars in the environment. The interaction of high-velocity fluid and large-scale surface-mounted obstacles in canopy flows produces drag and causes intense, inhomogeneous, and anisotropic turbulence. In this work, we focus on the turbulent dispersion of passive scalars by studying the ``pair dispersion'' - a statistical measure of relative motion between particles. We analyze the results of a 3D-PTV experiment in a wind tunnel canopy flow, focusing on small scales. We confirm the existence of local isotropy of pair dispersion at scales smaller than a characteristic shear length scale $L_Γ=(ε/Γ^3)^{1/2}$, where $ε$ and $Γ$ are the mean dissipation rate and shear rate, respectively. Furthermore, we show that pair dispersion in this locally isotropic regime is a scale-dependent super-diffusive process, similar to what occurs in homogeneous isotropic turbulent flows. In addition, we measure the pair relative velocity correlation function, showing that its de-correlation occurs in the locally isotropic regime, and discuss the implications of this observation for modeling pair dispersion. Thus, our study extends the fundamental understanding of turbulent pair dispersion to the anisotropic, inhomogeneous, turbulent canopy flow, bringing valuable information for modeling scalar dispersion in the atmospheric surface layer.
△ Less
Submitted 10 June, 2023;
originally announced June 2023.
-
Improved Prediction of Settling Behaviour of Solid Particles through Machine Learning Analysis of Experimental Retention Time Data
Authors:
Liron Simon Keren,
Teddy Lazebnik,
Alex Liberzon
Abstract:
The motion of particles through density-stratified interfaces is a common phenomenon in environmental and engineering applications. However, the mechanics of particle-stratification interactions in various combinations of particle and fluid properties are not well understood. This study presents a novel machine-learning (ML) approach to experimental data of inertial particles crossing a density-st…
▽ More
The motion of particles through density-stratified interfaces is a common phenomenon in environmental and engineering applications. However, the mechanics of particle-stratification interactions in various combinations of particle and fluid properties are not well understood. This study presents a novel machine-learning (ML) approach to experimental data of inertial particles crossing a density-stratified interface. A simplified particle settling experiment was conducted to obtain a large number of particles and expand the parameter range, resulting in an unprecedented data set that has been shared as open data. Using ML, the study explores new correlations that collapse the data from this, and previous work Verso et al. (2019). The ``delay time,'' which is the time between the particle exiting the interfacial layer and reaching a steady-state velocity, is found to strongly depend on six dimensionless parameters formulated by ML feature selection. The data shows a correlation between the Reynolds and Froude numbers within the range of the experiments, and the best symbolic regression is based on the Froude number only. This experiment provides valuable insights into the behavior of inertial particles in stratified layers and highlights opportunities for future improvement in predicting their motion.
△ Less
Submitted 23 December, 2023; v1 submitted 4 February, 2023;
originally announced February 2023.
-
Schlieren and BOS velocimetry of a round turbulent helium jet in air
Authors:
Gary S. Settles,
Alex Liberzon
Abstract:
Seedless velocimetry is gaining interest in many industrial and research applications. We report on a comparative study of time-resolved optical velocimetry using traditional, mirror-type knife-edge schlieren optics versus Background-Oriented Schlieren (BOS) of subsonic round turbulent helium jets in air at Red = 5,890 and 11,300. Digital images with 1024 pixels streamwise resolution (0 < x/d < 20…
▽ More
Seedless velocimetry is gaining interest in many industrial and research applications. We report on a comparative study of time-resolved optical velocimetry using traditional, mirror-type knife-edge schlieren optics versus Background-Oriented Schlieren (BOS) of subsonic round turbulent helium jets in air at Red = 5,890 and 11,300. Digital images with 1024 pixels streamwise resolution (0 < x/d < 200) were captured at 6000 frames/s in large ensembles. Velocimetry was performed on these results by digital image correlation (DIC) using OpenPIV software, and by streak-schlieren analysis of x-t diagrams (kymography). Limited PIV data were also collected for verification of the schlieren velocimetry results. Both BOS and traditional schlieren show partial success in measuring the mean-flow helium jet self-similarity in terms of the 1/x decay of centerline velocity, Gaussian-shaped radial velocity profiles, and linear spreading rate of the jet. Visualized turbulent eddies, used as tracers in schlieren velocimetry, are observed to last longer than is necessary for this purpose in the present helium jets. Also, the measured convective velocity appears to be sufficiently robust to sum to the jet mean velocity in some of the results. Kymography yields better overall results than DIC, which we attribute to kymography's spatiotemporal "spectrum" of jet velocities, enabling the discrimination of fast eddies near the jet centerline from slower ones near the jet periphery. DIC and other analysis methods suffer from a path-averaging bias which negatively affects the results. The reduction of kymographic data for velocimetry was done manually and also by a Fourier-transform image-feature-orientation code, both yielding equivalent results.
△ Less
Submitted 1 May, 2022; v1 submitted 8 February, 2022;
originally announced February 2022.
-
OpenPIV-Matlab -- An open-source software for particle image velocimetry; test case: birds' aerodynamics
Authors:
Hadar Ben Gida,
Roi Gurka,
Alex Liberzon
Abstract:
We present an open-source MATLAB package, entitled OpenPIV-Matlab, for analyzing particle image velocimetry (PIV) data. We extend the PIV analysis with additional tools for post-processing the PIV results including the estimation of aero/hydrodynamic forces from the PIV data of a wake behind an immersed (bluff or streamlined) body. The paper presents a detailed description of the packages, coverin…
▽ More
We present an open-source MATLAB package, entitled OpenPIV-Matlab, for analyzing particle image velocimetry (PIV) data. We extend the PIV analysis with additional tools for post-processing the PIV results including the estimation of aero/hydrodynamic forces from the PIV data of a wake behind an immersed (bluff or streamlined) body. The paper presents a detailed description of the packages, covering the three main parts: generating two-dimensional two component velocity fields from pairs of images (OpenPIV-Matlab), spatial and temporal flow analysis based on the velocity fields (Spatial and Temporal Analysis Toolbox), and wake flow analysis along with the force estimates (getWAKE Toolbox). A complete analysis with a variety of post-processing capabilities is demonstrated using time-resolved PIV wake data of a freely flying European starling (\emph{Sturnus vulgaris}) in a wind tunnel.
△ Less
Submitted 25 July, 2020;
originally announced July 2020.
-
Turbulence -- Obstacle Interactions in the Lagrangian Framework: Applications for Stochastic Modeling in Canopy Flows
Authors:
Ron Shnapp,
Yardena Bohbot-Raviv,
Alex Liberzon,
Eyal Fattal
Abstract:
Lagrangian stochastic models are widely used to predict and analyze turbulent dispersion in complex environments, such as in various terrestrial and marine canopy flows. However, due to a lack of empirical data, it is still not understood how particular features of highly inhomogeneous canopy flows affect the Lagrangian statistics. In this work, we study Lagrangian short time statistics by analyzi…
▽ More
Lagrangian stochastic models are widely used to predict and analyze turbulent dispersion in complex environments, such as in various terrestrial and marine canopy flows. However, due to a lack of empirical data, it is still not understood how particular features of highly inhomogeneous canopy flows affect the Lagrangian statistics. In this work, we study Lagrangian short time statistics by analyzing empirical Lagrangian trajectories in sub-volumes of space that are small in comparison with the canopy height. For the analysis we used 3D Lagrangian trajectories measured in a dense canopy flow model in a wind-tunnel, using an extended version of real-time 3D particle tracking velocimetry (3D-PTV). One of our key results is that the random turbulent fluctuations due to the intense dissipation were more dominant than the flow's inhomogeneity in affecting the short-time Lagrangian statistics. This amounts to a so-called quasi-homogeneous regime of Lagrangian statistics at small scales. Using the Lagrangian dataset we calculate the Lagrangian autocorrelation function and the second-order Lagrangian structure-function, and extract associated parameters, namely a Lagrangian velocity decorrelation timescale, $T_i$, and the Kolmogorov constant, $C_0$. We demonstrate that in the quasi-homogeneous regime, both these functions are well represented using a second-order Lagrangian stochastic model that was designed for homogeneous flows. Furthermore, we show that the spatial variations of the Lagrangian separation of scales, $T_i/τ_η$, and the Kolmogorov constant, $C_0$, cannot be explained by the variation of the Reynolds number, $Re_λ$, in space, and that $T_i/τ_η$ was small as compared with homogeneous turbulence predictions at similar $Re_λ$. We thus hypothesize that this occurred due to the so-called "wake production", and show empirical results supporting our hypothesis.
△ Less
Submitted 27 July, 2020; v1 submitted 29 October, 2019;
originally announced October 2019.
-
Transient stratification force on particles crossing a density interface
Authors:
Lilly Verso,
Maarten van Reeuwijk,
Alexander Liberzon
Abstract:
We perform a series of experiments to measure Lagrangian trajectories of settling and rising particles as they traverse a density interface of thickness $h$ using an index-matched water-salt-ethanol solution. The experiments confirm the substantial deceleration that particles experience as a result of the additional force exerted on the particle due to the sudden change in density. This stratifica…
▽ More
We perform a series of experiments to measure Lagrangian trajectories of settling and rising particles as they traverse a density interface of thickness $h$ using an index-matched water-salt-ethanol solution. The experiments confirm the substantial deceleration that particles experience as a result of the additional force exerted on the particle due to the sudden change in density. This stratification force is calculated from the measurement data for all particle trajectories. In the absence of suitable parameterizations in the literature, a simple phenomenological model is developed which relies on parameterizations of the effective wake volume and recovery time scale. The model accurately predicts the particle trajectories obtained in our experiments and those of \cite{Fernando1999}. Furthermore, the model demonstrates that the problem depends on four key parameters, namely the entrance Reynolds number $Re_1$, entrance Froude number $Fr$, particle to fluid density ratio $ρ_p/ρ_f$, and relative interface thickness $h/a$.
△ Less
Submitted 10 September, 2019; v1 submitted 22 October, 2018;
originally announced October 2018.
-
Flow sensor based on the snap-through detection of a curved micromechanical beam
Authors:
Yoav Kessler,
Robert Ilic,
Slava Krylov,
Alex Liberzon
Abstract:
We report on a flow velocity measurement technique based on snap-through detection of an electrostatically actuated, bistable micromechanical beam. We show that induced elecro-thermal Joule heating and the convective air cooling change the beam curvature and consequently the critical snap-through voltage ($V_{ST}$). Using single crystal silicon beams, we demonstrate the snap-through voltage to flo…
▽ More
We report on a flow velocity measurement technique based on snap-through detection of an electrostatically actuated, bistable micromechanical beam. We show that induced elecro-thermal Joule heating and the convective air cooling change the beam curvature and consequently the critical snap-through voltage ($V_{ST}$). Using single crystal silicon beams, we demonstrate the snap-through voltage to flow velocity sensitivity of $dV_{\text{ST}}/du \approx0.13$ V s m$^{-1}$ with a power consumption of $\approx360\; μ$W. Our experimental results were in accord with the reduced order, coupled, thermo-electro-mechanical model prediction. We anticipate that electrostatically induced snap-through in curved, micromechanical beams will open new directions for the design and implementation of downscaled flow sensors for autonomous applications and environmental sensors.
△ Less
Submitted 14 June, 2018;
originally announced June 2018.
-
Extended 3D-PTV for direct measurements of Lagrangian statistics of canopy turbulence in a wind tunnel
Authors:
Ron Shnapp,
Erez Shapira,
David Peri,
Yardena Bohbot-Raviv,
Eyal Fattal,
Alex Liberzon
Abstract:
Direct estimation of Lagrangian turbulence statistics is essential for the proper modeling of dispersion and transport in highly obstructed canopy flows. However, Lagrangian flow measurements demand very high rates of data acquisition, resulting in bottlenecks that prevented the estimation of Lagrangian statistics in canopy flows hitherto. We report on a new extension to the 3D Particle Tracking V…
▽ More
Direct estimation of Lagrangian turbulence statistics is essential for the proper modeling of dispersion and transport in highly obstructed canopy flows. However, Lagrangian flow measurements demand very high rates of data acquisition, resulting in bottlenecks that prevented the estimation of Lagrangian statistics in canopy flows hitherto. We report on a new extension to the 3D Particle Tracking Velocimetry (3D-PTV) method, featuring real-time particle segmentation that outputs centroids and sizes of tracer particles and performed on dedicated hardware during high-speed digital video acquisition from multiple cameras. The proposed extension results in four orders of magnitude reduction in data transfer rate that enables to perform substantially longer experimental runs, facilitating measurements of convergent statistics. The extended method is demonstrated through an experimental wind tunnel investigation of the Lagrangian statistics in a heterogeneous canopy flow. We observe that acceleration statistics are affected by the mean shear at the top of the canopy layer and that Lagrangian particle dispersion at small scales is dominated by turbulence in the wake of the roughness elements. This approach enables to overcome major shortcomings from Eulerian-based measurements which rely on assumptions such as the Taylor's frozen turbulence hypothesis, which is known to fail in highly turbulent flows.
△ Less
Submitted 25 April, 2019; v1 submitted 13 June, 2018;
originally announced June 2018.
-
Generalization of Turbulent Pair Dispersion to Large Initial Separations
Authors:
Ron Shnapp,
Alex Liberzon
Abstract:
We present a generalization of turbulent pair dispersion to large initial separations ($η< r_0 < L$), by introducing a new time scale, $τ_{v_0}$, that reflects the persistence of initial conditions at time $τ=0$. Results of 3D Lagrangian tracking experiments at moderate Reynolds numbers show that pairs, for which the new time scale is shorter than the eddy turnover time scale, separate as in the R…
▽ More
We present a generalization of turbulent pair dispersion to large initial separations ($η< r_0 < L$), by introducing a new time scale, $τ_{v_0}$, that reflects the persistence of initial conditions at time $τ=0$. Results of 3D Lagrangian tracking experiments at moderate Reynolds numbers show that pairs, for which the new time scale is shorter than the eddy turnover time scale, separate as in the Richardson superdiffusive regime, $\langle Δr^2 \rangle \propto τ^3$. The analysis of delay times (time interval to cross $Δr = ρ\, r_0$) of these conditionally sampled pairs exhibit $ρ^{2/5}$ scaling.
△ Less
Submitted 29 March, 2018; v1 submitted 15 July, 2017;
originally announced July 2017.
-
Small scale dynamics of a shearless turbulent/non-turbulent interface in dilute polymer solutions
Authors:
Giacomo Cocconi,
Elisabetta De Angelis,
Bettina Frohnapfel,
Mark Baevsky,
Alex Liberzon
Abstract:
We study the physics of turbulent/non-turbulent interface of an isolated turbulent region in dilute polymer solutions and Newtonian fluid. The performance of a FENE-P model with a localized homogeneous forcing is verified using the specially designed experimental setup of a turbulent patch growing in water/dilute polymer solution, without mean shear and far from the walls. The results of the small…
▽ More
We study the physics of turbulent/non-turbulent interface of an isolated turbulent region in dilute polymer solutions and Newtonian fluid. The performance of a FENE-P model with a localized homogeneous forcing is verified using the specially designed experimental setup of a turbulent patch growing in water/dilute polymer solution, without mean shear and far from the walls. The results of the small scale dynamics of vorticity and strain help to reveal the key mechanism of polymer action in turbulent flows without mean shear. Modified degrees of alignment between vorticity, the polymer conformation and the rate-of-strain tensors found especially near the interface explain the reduced vorticity stretching and increased vorticity compression terms. These small scale alignments in the non-Newtonian turbulent flow thus lead to a reduced production of enstrophy and consequently to a reduced entrainment (seen as propagation or dispersion).
△ Less
Submitted 17 July, 2017; v1 submitted 18 December, 2016;
originally announced December 2016.
-
Robust and fast online identification of streamwise vortices properties for closed-loop control purposes
Authors:
Caroline Braud,
Alex Liberzon
Abstract:
We propose to combine the active vortex generators with the particle image velocimetry (PIV) measurements and post-processing streamwise vortex characterization algorithms into a feedback based closed-loop control system for wind turbine applications. We develop two vortex identification and characterization methods that use PIV realizations for the purpose of a real-time (online or on-the-fly) fe…
▽ More
We propose to combine the active vortex generators with the particle image velocimetry (PIV) measurements and post-processing streamwise vortex characterization algorithms into a feedback based closed-loop control system for wind turbine applications. We develop two vortex identification and characterization methods that use PIV realizations for the purpose of a real-time (online or on-the-fly) feedback-based control. Both methods can extract centers and strengths of streamwise vortices generated behind active vortex generators in a turbulent boundary layer flow, and we show how to integrate those in a closed-loop control strategy. For demonstration purposes we use stereoscopic PIV measurements at the wind tunnel facility obtained in the transverse-wall-normal plane behind active vortex generators. A robust algorithm is using the $Q$-criteria and the integration of vorticity of each extracted vortex. Results show that a moving window average of a small number of instantaneous fields is nevertheless needed for increased robustness. The robust method requires the full field PIV computation followed by spatial derivatives calculations. A faster method is developed, which, using only horizontal lines of vertical velocity, has a high potential to significantly cut down the computational effort relative to the robust method. We compare the two methods and discuss their shortcomings and the potential for the real-time, online, closed-loop control of turbulent boundary layers of the wind turbine blades.
△ Less
Submitted 17 December, 2016;
originally announced December 2016.
-
Flow sensing by buckling monitoring of electrothermally actuated double-clamped micro beams
Authors:
Yoav Kessler,
Slava Krylov,
Alex Liberzon
Abstract:
We report on a flow sensing approach based on deflection monitoring of micro beams buckled by the compressive thermal stress due to electrothermal Joules heating. The air stream convectively cooling the device affects both the critical buckling values of the electric current and the postbuckling deflections of the structure. After calibration, the flow velocity was obtained from the deflections me…
▽ More
We report on a flow sensing approach based on deflection monitoring of micro beams buckled by the compressive thermal stress due to electrothermal Joules heating. The air stream convectively cooling the device affects both the critical buckling values of the electric current and the postbuckling deflections of the structure. After calibration, the flow velocity was obtained from the deflections measurements. The quasi-static responses of 2000 microns long, 10 microns wide and 30 microns high single crystal silicon beam transduced using image processing were consistent with the prediction of the reduced order model, which couples thermoelectric, thermofluidic and structural domains. The deflection sensitivity of 1.5 microns/(m/s) and the critical current sensitivity of 0.4 mA/(m/s) were registered in the experiments. Our model and experimental results collectively demonstrate feasibility of the sensing approach and further suggest that simple, robust and potentially downscalable beam-type devices may have use in flow velocity and wall shear stress sensors.
△ Less
Submitted 18 May, 2016; v1 submitted 17 May, 2016;
originally announced May 2016.
-
Experimental study of the initial growth of a localized turbulent patch in a stably stratified fluid
Authors:
Lilly Verso,
Maarten van Reeuwijk,
Roi Gurka,
Peter J. Diamessis,
Zachary J. Taylor,
Alex Liberzon
Abstract:
We present a laboratory experiment of the growth of a turbulent patch in a stably stratified fluid, due to a localized source of turbulence, generated by an oscillating grid. Synchronized and overlap** particle image velocimetry and planar laser induced fluorescence measurements have been conducted capturing the evolution of the patch through its initial growth until it reached a maximum size, f…
▽ More
We present a laboratory experiment of the growth of a turbulent patch in a stably stratified fluid, due to a localized source of turbulence, generated by an oscillating grid. Synchronized and overlap** particle image velocimetry and planar laser induced fluorescence measurements have been conducted capturing the evolution of the patch through its initial growth until it reached a maximum size, followed by its collapse. The simultaneous measurements of density and velocity fields allow for a direct quantification of the degree of mixing within the patch, the propagation speed of the turbulent/non-turbulent interface and its thickness. The velocity measurements indicate significant non-equilibrium effects inside the patch which are not consistent with the classical used grid-action model. A local analysis of the turbulent/non-turbulent interface provides direct measurements of the entrainment velocity $w_{e}$ as compared to the local vertical velocity and turbulent intensity at the proximity of the interface. It is found that the entrainment rate $E$ is constrained in the range of $0÷0.1$ and that the local, gradient Richardson number at the interface is $\mathcal{O} (100)$. Finally, we show that the mean flow is responsible for the patch collapse.
△ Less
Submitted 24 March, 2016; v1 submitted 21 March, 2016;
originally announced March 2016.
-
Experimental study of forces on freely moving spherical particles during resuspension into turbulent flow
Authors:
Hadar Traugott,
Alex Liberzon
Abstract:
Turbulent resuspension, a process of lifting solid particles from the bottom by turbulent flow, is ubiquitous in environmental and industrial applications. The process is a sequence of events that start with an incipient motion of the particle being dislodged from its place, continue as sliding or rolling on the surface, ending with the particle being detached from the surface and lifted up into t…
▽ More
Turbulent resuspension, a process of lifting solid particles from the bottom by turbulent flow, is ubiquitous in environmental and industrial applications. The process is a sequence of events that start with an incipient motion of the particle being dislodged from its place, continue as sliding or rolling on the surface, ending with the particle being detached from the surface and lifted up into the flow. In this study the focus is on the resuspension of solid spherical particles with the density comparable to that of the fluid and the diameter comparable with the Kolmogorov length scale. We track their motion during the lift-off events in an oscillating grid turbulent flow. We measure simultaneously the Lagrangian trajectories of both the particles freely moving along the bottom smooth wall and the surrounding flow tracers. Different force terms acting on particles were estimated based on particle motion and local flow parameters. The results show that: \emph{i}) the lift force is dominant; \emph{ii}) drag force on freely moving particles is less relevant in this type of resuspension; \emph{iii}) the Basset (history or viscous-unsteady) force is a non-negligible component and plays an important role before the lift-off event. Although we cannot estimate very accurately the magnitude of the force terms, we find that during the resuspension they are within the range of $2\div10$ times the buoyancy force magnitude. The findings cannot be extrapolated to particles, which are much smaller than the Kolmogorov length scale, or much denser than the fluid. Nevertheless, the present findings can assist in modeling of the sediment transport, particle filtration, pneumatic conveying and mixing in bio-reactors.
△ Less
Submitted 28 May, 2016; v1 submitted 3 October, 2015;
originally announced October 2015.
-
Background Oriented Schlieren in a Density Stratified Fluid
Authors:
Lilly Verso,
Alex Liberzon
Abstract:
Non-intrusive quantitative fluid density measurements methods are essential in stratified flow experiments. Digital imaging leads to synthetic Schlieren methods in which the variations of the index of refraction are reconstructed computationally. In this study, an important extension to one of these methods, called Background Oriented Schlieren (BOS), is proposed. The extension enables an accurate…
▽ More
Non-intrusive quantitative fluid density measurements methods are essential in stratified flow experiments. Digital imaging leads to synthetic Schlieren methods in which the variations of the index of refraction are reconstructed computationally. In this study, an important extension to one of these methods, called Background Oriented Schlieren (BOS), is proposed. The extension enables an accurate reconstruction of the density field in stratified liquid experiments. Typically, the experiments are performed by the light source, background pattern, and the camera positioned on the opposite sides of a transparent vessel. The multi-media imaging through air-glass-water-glass-air leads to an additional aberration that destroys the reconstruction. A two-step calibration and image remap** transform are the key components that correct the images through the stratified media and provide non-intrusive full-field density measurements of transparent liquids.
△ Less
Submitted 29 June, 2015;
originally announced June 2015.
-
Stratified wake of an accelerating hydrofoil
Authors:
Hadar Ben-Gida,
Alex Liberzon,
Roi Gurka
Abstract:
Wakes of towed and self-propelled bodies in stratified fluids are significantly different from non-stratified wakes. Long time effects of stratification on the development of the wakes of bluff bodies moving at constant speed are well known. In this experimental study we demonstrate how buoyancy affects the initial growth of vortices develo** in the wake of a hydrofoil accelerating from rest. Pa…
▽ More
Wakes of towed and self-propelled bodies in stratified fluids are significantly different from non-stratified wakes. Long time effects of stratification on the development of the wakes of bluff bodies moving at constant speed are well known. In this experimental study we demonstrate how buoyancy affects the initial growth of vortices develo** in the wake of a hydrofoil accelerating from rest. Particle image velocimetry measurements were applied to characterize the wake evolution behind a NACA 0015 hydrofoil accelerating in water and for low Reynolds number and relatively strong and stably stratified fluid (Re=5,000, Fr~O(1)). The analysis of velocity and vorticity fields, following vortex identification and an estimate of the circulation, reveal that the vortices in the stratified fluid case are stretched along the streamwise direction in the near wake. The momentum thickness profiles show lower momentum thickness values for the stratified late wake compared to the non-stratified wake, implying that the drag on an accelerating hydrofoil in a stratified medium is reduced at the acceleration stage. The findings may improve our ability to predict drag due to maneuvering of micro-air/watervehicles in stratified conditions.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
On the estimation of time dependent lift of a European Starling during flap**
Authors:
Oksana Stalnov,
Hadar Ben-Gida,
Adam J. Kirchhefer,
Christoper G. Guglielmo,
Gregory A. Kopp,
Alex Liberzon,
Roi Gurka
Abstract:
We study the role of unsteady lift in the context of flap** wings in birds' flight. Both aerodynamicists and biologists attempt to address this subject, yet it seems that the contribution of the unsteady lift still holds many open questions. The current study deals with the estimation of unsteady aerodynamic forces on a freely flying bird through analysis of wingbeat kinematics and near wake flo…
▽ More
We study the role of unsteady lift in the context of flap** wings in birds' flight. Both aerodynamicists and biologists attempt to address this subject, yet it seems that the contribution of the unsteady lift still holds many open questions. The current study deals with the estimation of unsteady aerodynamic forces on a freely flying bird through analysis of wingbeat kinematics and near wake flow measurements using time resolved particle image velocimetry. The aerodynamic forces are obtained through unsteady thin airfoil theory and lift calculation using the momentum equation for viscous flows. The unsteady lift is comprised of circulatory and non-circulatory components. Both are presented over wingbeat cycles. Using long sampling data, several wingbeat cycles have been analyzed in order to cover the downstroke and upstroke phases. It appears that the lift varies over the wingbeat cycle emphasizing its contribution to the total lift and its role in power estimations. It is suggested that the circulatory lift component cannot assumed to be negligible and should be considered when estimating lift or power of birds in flap** motion.
△ Less
Submitted 28 February, 2015;
originally announced March 2015.
-
A statistical conservation law in two and three dimensional turbulent flows
Authors:
Anna Frishman,
Guido Boffetta,
Filippo De Lillo,
Alex Liberzon
Abstract:
Particles in turbulence live complicated lives. It is nonetheless sometimes possible to find order in this complexity. It was proposed in [Falkovich et al., Phys. Rev. Lett. 110, 214502 (2013)] that pairs of Lagrangian tracers at small scales, in an incompressible isotropic turbulent flow, have a statistical conservation law. More specifically, in a d-dimensional flow the distance $R(t)$ between t…
▽ More
Particles in turbulence live complicated lives. It is nonetheless sometimes possible to find order in this complexity. It was proposed in [Falkovich et al., Phys. Rev. Lett. 110, 214502 (2013)] that pairs of Lagrangian tracers at small scales, in an incompressible isotropic turbulent flow, have a statistical conservation law. More specifically, in a d-dimensional flow the distance $R(t)$ between two neutrally buoyant particles, raised to the power $-d$ and averaged over velocity realizations, remains at all times equal to the initial, fixed, separation raised to the same power. In this work we present evidence from direct numerical simulations of two and three dimensional turbulence for this conservation. In both cases the conservation is lost when particles exit the linear flow regime. In 2D we show that, as an extension of the conservation law, a Evans-Cohen-Morriss/Gallavotti-Cohen type fluctuation relation exists. We also analyse data from a 3D laboratory experiment [Liberzon et al., Physica D 241, 208 (2012)], finding that although it probes small scales they are not in the smooth regime. Thus instead of $\left<R^{-3}\right>$, we look for a similar, power-law-in-separation conservation law. We show that the existence of an initially slowly varying function of this form can be predicted but that it does not turn into a conservation law. We suggest that the conservation of $\left<R^{-d}\right>$, demonstrated here, can be used as a check of isotropy, incompressibility and flow dimensionality in numerical and laboratory experiments that focus on small scales.
△ Less
Submitted 2 August, 2015; v1 submitted 12 January, 2015;
originally announced January 2015.
-
Detailed comparative study and a mechanistic model of resuspension of spherical particles from rough and smooth surfaces
Authors:
Ron Shnapp,
Alex Liberzon
Abstract:
Resuspension of solid particles by a tornado-like vortex from surfaces of different roughness is studied using a three-dimensional particle tracking velocimetry (3D-PTV) method. By utilizing the three-dimensional information on particle positions, velocities and accelerations before, during and after the resuspension (lift-off) event, we demonstrate that the resuspension efficiency is significantl…
▽ More
Resuspension of solid particles by a tornado-like vortex from surfaces of different roughness is studied using a three-dimensional particle tracking velocimetry (3D-PTV) method. By utilizing the three-dimensional information on particle positions, velocities and accelerations before, during and after the resuspension (lift-off) event, we demonstrate that the resuspension efficiency is significantly higher from the rough surface, and propose a mechanistic model of this peculiar effect. The results indicate that for all Reynolds numbers tested, the resuspension rate, as well as particle velocities and accelerations, are higher over the rough surface, as compared to the smooth counterpart. The results and the model can help to improve modeling and analysis of resuspension rates in engineering and environmental applications.
△ Less
Submitted 19 November, 2014;
originally announced November 2014.
-
Particle-fluid interaction forces as the source of acceleration PDF invariance in particle size
Authors:
Yosef Meller,
Alex Liberzon
Abstract:
The conditions allowing particle suspension in turbulent flow are of interest in many applications, but understanding them is complicated both by the nature of turbulence and by the interaction of flow with particles. Observations on small particles indicate an invariance of acceleration PDFs of small particles independent of size. We show to be true the postulated role of particle/fluid interacti…
▽ More
The conditions allowing particle suspension in turbulent flow are of interest in many applications, but understanding them is complicated both by the nature of turbulence and by the interaction of flow with particles. Observations on small particles indicate an invariance of acceleration PDFs of small particles independent of size. We show to be true the postulated role of particle/fluid interaction forces in maintaining suspension. The 3D-PTV method, applied for two particle phases (tracers and inertial particles) simultaneously, was used to obtain velocity and acceleration data, and through the use of the particle's equation of motion the magnitude of forces representing either the flow or the particle interaction were derived and compared. The invariance of PDFs is shown to extend to the component forces, and lift forces are shown to be significant.
△ Less
Submitted 9 July, 2014;
originally announced July 2014.
-
Moth-inspired navigation algorithm in a turbulent odor plume from a pulsating source
Authors:
Alex Liberzon,
Kyra Harrington,
Nimrod Daniel,
Roi Gurka,
Ally Harari,
Gregory Zilman
Abstract:
Some female moths attract male moths by emitting series of pulses of pheromone filaments propagating downwind. The turbulent nature of the wind creates a complex flow environment, and causes the filaments to propagate in the form of patches with varying concentration distributions. Inspired by moth navigation capabilities, we propose a navigation strategy that enables a flier to locate a pulsating…
▽ More
Some female moths attract male moths by emitting series of pulses of pheromone filaments propagating downwind. The turbulent nature of the wind creates a complex flow environment, and causes the filaments to propagate in the form of patches with varying concentration distributions. Inspired by moth navigation capabilities, we propose a navigation strategy that enables a flier to locate a pulsating odor source in a windy environment using a single threshold-based detection sensor. The strategy is constructed based on the physical properties of the turbulent flow carrying discrete puffs of odor and does not involve learning, memory, complex decision making or statistical methods. We suggest that in turbulent plumes from a pulsating point source, an instantaneously measurable quantity referred as a "puff crossing time", improves the success rate as compared to the navigation strategy based on "internal counter" that does not use this information. Using computer simulations of fliers navigating in turbulent plumes of the pulsating point source for varying flow parameters: turbulent intensities, plume meandering and wind gusts, we obtained trajectories qualitatively resembling male moths flights towards the pheromone sources. We quantified the probability of a successful navigation as well as the flight parameters such as the time spent searching and the total flight time, with respect to different turbulent intensities, meandering or gusts. The concepts learned using this model may help to design odor-based navigation of miniature airborne autonomous vehicles.
△ Less
Submitted 7 January, 2018; v1 submitted 4 October, 2013;
originally announced October 2013.
-
Pulsatility index as a diagnostic parameter of reciprocating wall shear stress 2 parameters in physiological pulsating waveforms
Authors:
Idit Avrahami,
Dikla Kersh,
Alex Liberzon
Abstract:
Arterial wall shear stress (WSS) parameters are widely used for prediction of the initiation and development of atherosclerosis and arterial pathologies. Traditional clinical evaluation of arterial condition relies on correlations of WSS parameters with average flow rate (Q) and heart rate (HR) measurements. We show that for pulsating flow waveforms in a straight tube with flow reversals that lead…
▽ More
Arterial wall shear stress (WSS) parameters are widely used for prediction of the initiation and development of atherosclerosis and arterial pathologies. Traditional clinical evaluation of arterial condition relies on correlations of WSS parameters with average flow rate (Q) and heart rate (HR) measurements. We show that for pulsating flow waveforms in a straight tube with flow reversals that lead to significant reciprocating WSS, the measurements of HR and Q are not sufficient for prediction of WSS parameters. Therefore, we suggest adding a third quantity - known as the pulsatility index (PI) - which is defined as the peak-to-peak flow rate amplitude normalized by Q. We examine several pulsating flow waveforms with and without flow reversals using a simulation of a Womersley model in a straight rigid tube and validate the simulations through experimental study using particle image velocimetry (PIV). The results indicate that clinically relevant WSS parameters such as the percentage of negative WSS (P[%]), oscillating shear index (OSI) and the ratio of minimum to maximum shear stress rates (min/max), are better predicted when the PI is used in conjunction with HR and Q. Therefore, we propose to use PI as an additional and essential diagnostic quantity for improved predictability of the reciprocating WSS.
△ Less
Submitted 27 May, 2016; v1 submitted 15 March, 2013;
originally announced March 2013.
-
Experiments on the vortex wake of a swimming knifefish
Authors:
Zachary J. Taylor,
Alexander Liberzon,
Roi Gurka,
Roi Holzman,
Thomas Reesbeck,
F. Javier Diez
Abstract:
The knifefish species propels itself by generating a reverse Karman street from an anal fin and without significantly moving its body. This unique feature makes this species' propulsion method highly efficient (Blake, 1983). It has been suggested that there is an optimal swimming range for fish based on the amplitude and frequency of the reverse Kármán street. Experiments have been performed to me…
▽ More
The knifefish species propels itself by generating a reverse Karman street from an anal fin and without significantly moving its body. This unique feature makes this species' propulsion method highly efficient (Blake, 1983). It has been suggested that there is an optimal swimming range for fish based on the amplitude and frequency of the reverse Kármán street. Experiments have been performed to measure the ratio between the amplitude and wavelength of vortices in the wake of a knifefish. It is suggested that by optimizing the thrust created by the reverse Karman street the wave efficiency can be estimated for a given spacing ratio, and present observations have an average value of 0.89. The relationship established between spacing ratio and wave efficiency, in addition to the measured parameters, will be invaluable for bio-inspired designs based on the knifefish.
△ Less
Submitted 30 October, 2012;
originally announced October 2012.
-
Role of self-propulsion of marine larvae on their probability of contact with a protruding collector located in a sea current
Authors:
Gregory Zilman,
Julia Novak,
Alex Liberzon,
Shimrit Perkol-Finkel,
Yehuda Benayahu
Abstract:
Settlement of marine larvae on a substrate is a fundamental problem of marine life. The probability of settlement is one of the quantitative characteristic of the settlement process. The probability of larval contact with a substrate is the upper bound of the probability of settlement. This work addresses the problem of contact probability and contact rate of marine invertebrate larvae with an iso…
▽ More
Settlement of marine larvae on a substrate is a fundamental problem of marine life. The probability of settlement is one of the quantitative characteristic of the settlement process. The probability of larval contact with a substrate is the upper bound of the probability of settlement. This work addresses the problem of contact probability and contact rate of marine invertebrate larvae with an isolated protruding collector located in an unbounded sea current. There are two common approaches to the problem of contact probability. In one, a collector induces certain cues, which help a larvae find the collector. In such a case, the larva moves towards the collector deliberately, using its navigation and propulsion devices. In the second approach, a larva moves towards a collector as a passive small particle. In this case, the cause of contact of a larva with a collector is a mechanical collision of a small moving body with a large obstacle. We considered a larva which does not know the location of the collector, which does not use its navigation device yet uses its self-propulsion. We mimicked a larva by a tiny self-propelled underwater vehicle, moving in shear flow of a large obstacle. We illustrated our approach by studying contact of a larva of the Bryozoan Bugula neritina with a cylindrical collector. We observed the behavior of this larva in a laboratory flume, and according to the observations formulated a mathematical model of larval motion in shear flow. The trajectories of a large number of larvae, starting their motion far from a collector with random initial conditions are calculated numerically, and the probability of their contact with a collector is estimated. The results of Monte-Carlo simulations illustrate that larval self-propulsion may increase the probability of their contact with a collector by orders of magnitude compared to passive particles.
△ Less
Submitted 7 August, 2011;
originally announced August 2011.
-
Experimental observation of the steady - oscillatory transition in a cubic lid-driven cavity
Authors:
A. Liberzon,
Y. Feldman,
A. Yu. Gelfgat
Abstract:
Particle image velocimetry is applied to the lid-driven flow in a cube to validate the numerical prediction of steady - oscillatory transition at lower than ever observed Reynolds number. Experimental results agree with the numerical simulation demonstrating large amplitude oscillatory motion overlaying the base quasi-two-dimensional flow in the mid-plane. A good agreement in the values of critica…
▽ More
Particle image velocimetry is applied to the lid-driven flow in a cube to validate the numerical prediction of steady - oscillatory transition at lower than ever observed Reynolds number. Experimental results agree with the numerical simulation demonstrating large amplitude oscillatory motion overlaying the base quasi-two-dimensional flow in the mid-plane. A good agreement in the values of critical Reynolds number and frequency of the appearing oscillations, as well as similar spatial distributions of the oscillations amplitude are obtained.
△ Less
Submitted 3 July, 2011;
originally announced July 2011.
-
Viscous tilting and production of vorticity in homogeneous turbulence
Authors:
M. Holzner,
M. Guala,
B. Lüthi,
A. Liberzon,
N. Nikitin,
W. Kinzelbach,
A. Tsinober
Abstract:
Viscous depletion of vorticity is an essential and well known property of turbulent flows, balancing, in the mean, the net vorticity production associated with the vortex stretching mechanism. In this letter we however demonstrate that viscous effects are not restricted to a mere destruction process, but play a more complex role in vorticity dynamics that is as important as vortex stretching. Ba…
▽ More
Viscous depletion of vorticity is an essential and well known property of turbulent flows, balancing, in the mean, the net vorticity production associated with the vortex stretching mechanism. In this letter we however demonstrate that viscous effects are not restricted to a mere destruction process, but play a more complex role in vorticity dynamics that is as important as vortex stretching. Based on results from particle tracking experiments (3D-PTV) and direct numerical simulation (DNS) of homogeneous and quasi isotropic turbulence, we show that the viscous term in the vorticity equation can also locally induce production of vorticity and changes of its orientation (viscous tilting).
△ Less
Submitted 8 February, 2010;
originally announced February 2010.
-
Small scale aspects of flows in proximity of the turbulent/non-turbulent interface
Authors:
M. Holzner,
A. Liberzon,
N. Nikitin,
W. Kinzelbach,
A. Tsinober
Abstract:
The work reported below is a first of its kind study of the properties of turbulent flow without strong mean shear in a Newtonian fluid in proximity of the turbulent/non-turbulent interface, with emphasis on the small scale aspects. The main tools used are a three-dimensional particle tracking system (3D-PTV) allowing to measure and follow in a Lagrangian manner the field of velocity derivatives…
▽ More
The work reported below is a first of its kind study of the properties of turbulent flow without strong mean shear in a Newtonian fluid in proximity of the turbulent/non-turbulent interface, with emphasis on the small scale aspects. The main tools used are a three-dimensional particle tracking system (3D-PTV) allowing to measure and follow in a Lagrangian manner the field of velocity derivatives and direct numerical simulations (DNS). The comparison of flow properties in the turbulent (A), intermediate (B) and non-turbulent (C) regions in the proximity of the interface allows for direct observation of the key physical processes underlying the entrainment phenomenon. The differences between small scale strain and enstrophy are striking and point to the definite scenario of turbulent entrainment via the viscous forces originating in strain.
△ Less
Submitted 4 May, 2007;
originally announced May 2007.