-
The influence of flame-pressure waves collisions on the development and evolution of tulip flames
Authors:
Chengeng Qian,
Mikhail A. Liberman
Abstract:
The effects of pressure waves-flame collisions and tube aspect ratio on flame evolution and the formation of tulip and distorted tulip flames were investigated using numerical simulations of the fully compressible Navier-Stokes equations coupled with a detailed chemical model for a stoichiometric hydrogen-air mixture. It is shown that: (1) the rarefaction wave generated by the decelerating flame i…
▽ More
The effects of pressure waves-flame collisions and tube aspect ratio on flame evolution and the formation of tulip and distorted tulip flames were investigated using numerical simulations of the fully compressible Navier-Stokes equations coupled with a detailed chemical model for a stoichiometric hydrogen-air mixture. It is shown that: (1) the rarefaction wave generated by the decelerating flame in the unburned gas is the primary physical process leading to the flame front inversion and the tulip flame formation, (2) the flame front instabilities (Darrieus-Landau or Rayleigh-Taylor) do not participate in the formation of the tulip flame, since the time of the flame front inversion due to the rarefaction wave is considerably shorter than the characteristic times of the development of instabilities with wavelengths of the order of the tube width. The first rarefaction wave in the unburned gas mixture is generated after the flame skirt touches the tube walls and the flame is slowed down due to the reduction in flame surface area. The collision of the flame with the pressure waves reflected from the closed end of the tube leads to a faster and more pronounced formation of a tulip-shaped flame. In later stages, flame collisions with pressure waves can lead to the formation of distorted tulip flames due to short-wavelength Rayleigh-Taylor instability of the flame front. Because flame acceleration and deceleration occur much faster in 3D flames than in 2D flames, tulip flame formation also occurs much faster in 3D flames than in 2D flames.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
On the tulip flame formation: the effect of pressure waves
Authors:
Chengeng Qian,
Mikhail A. Liberman
Abstract:
The effects of pressure waves on the tulip flame formation in closed and semi-open tubes were studied using numerical simulations of the fully compressible Navier-Stokes equations coupled to a detailed chemical model for stoichiometric hydrogen air mixture. Rarefaction waves generated by the decelerating flame are shown to be the primary physical process leading to the flame front inversion and th…
▽ More
The effects of pressure waves on the tulip flame formation in closed and semi-open tubes were studied using numerical simulations of the fully compressible Navier-Stokes equations coupled to a detailed chemical model for stoichiometric hydrogen air mixture. Rarefaction waves generated by the decelerating flame are shown to be the primary physical process leading to the flame front inversion and the tulip flame formation for spark and for planar ignited flames in closed tubes. In the case of a spark ignited flame, the first rarefaction wave is generated by the flame, which is decelerating due to the reduction in flame surface area as the flame skirt touches the tube walls. Flame collisions with pressure waves in a closed tube result in additional deceleration stages and rarefaction waves that shorten the time of the tulip flame formation.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
On the mechanism of "tulip flame" formation: the effect of ignition sources
Authors:
Chengeng Qian,
Mikhail A. Liberman
Abstract:
The early stages of hydrogen-air flame dynamics and the physical mechanism of tulip flame formation were studied using high-resolution numerical simulations to solve the two-dimensional fully compressible Navier-Stokes equations coupled with a one-step chemical model, which was calibrated to obtain the correct the laminar flame velocity-pressure dependence. The formation of tulip flames was invest…
▽ More
The early stages of hydrogen-air flame dynamics and the physical mechanism of tulip flame formation were studied using high-resolution numerical simulations to solve the two-dimensional fully compressible Navier-Stokes equations coupled with a one-step chemical model, which was calibrated to obtain the correct the laminar flame velocity-pressure dependence. The formation of tulip flames was investigated for a flame ignited by a spark or by a planar ignition and propagating to the opposite closed or open end. For a flame ignited by a spark on-axis at the closed end of the tube and propagating to the opposite closed or open end, a tulip flame is created by a tulip-shaped axial velocity profile in the unburned gas flow near the flame front caused by the rarefaction wave(s) created by the flame during the deceleration stage(s). It is shown that, in a tube with both closed ends, this mechanism of tulip flame formation also holds for flames initiated by planar ignition. The deceleration stages in the case of planar ignition are caused by collisions of the flame front with pressure waves reflected from the opposite end of the tube. In the case of a flame initiated by planar ignition and propagating toward the open end, the mechanism of tulip flame formation is related to the stretching of the flame skirt edges backward along the side wall of the tube due to wall friction, which leads to the formation of bulges in the flame front near the tube walls. The bulges grow and finally meet at the axis of the tube, forming a tulip-shaped flame. Regardless of the method of flame initiation at the closed end, no distorted tulip flame is formed when the flame propagates to the open end of the tube.
△ Less
Submitted 24 August, 2023;
originally announced August 2023.
-
On the formation of a tulip flame in closed and semi-open tubes
Authors:
Mikhail A. Liberman,
Chengeng Qian,
Cheng Wang
Abstract:
The paper examines the mechanism of the tulip flame formation for the flames propagating in closed tubes of various aspect ratios and in a half-open tube. The formation of tulip flames in 2D channels is studied using high resolution direct numerical simulations of the reactive Navier Stokes equations coupled with a detailed chemical model for a stoichiometric hydrogen/air flame. It is shown that r…
▽ More
The paper examines the mechanism of the tulip flame formation for the flames propagating in closed tubes of various aspect ratios and in a half-open tube. The formation of tulip flames in 2D channels is studied using high resolution direct numerical simulations of the reactive Navier Stokes equations coupled with a detailed chemical model for a stoichiometric hydrogen/air flame. It is shown that rarefaction waves generated by the flame during the deceleration stage play a key role in the tulip-shaped flame formation. The interaction of the reverse flow created behind the rarefaction wave with previously produced be accelerating flame flow in the unburned gas, results in the decrease of the flow velocity in the near field zone ahead of the flame and in the increase of the boundary layer thickness. The profile of the axial velocity close ahead of the flame takes the form of an inverted tulip. Therefore, the flame front acquires a tulip shape repeating to a large extent the shape of the of the axial velocity profile in the upstream flow.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Hydrogen Atom in Electric and Magnetic Fields: Dynamical Symmetries, Superintegrable and Integrable Systems, Exact Solutions
Authors:
Mikhail A. Liberman
Abstract:
The Hamiltonian of a pure hydrogen atom possesses the SO(4) symmetry group generated by the integrals of motion: the angular momentum and the Runge-Lenz vector. The pure hydrogen atom is a supersymmetric and superintegrable system, since the Hamilton-Jacobi and the Schrödinger equations are separable in several different coordinate systems and has an exact analytical solution. The Schrödinger equa…
▽ More
The Hamiltonian of a pure hydrogen atom possesses the SO(4) symmetry group generated by the integrals of motion: the angular momentum and the Runge-Lenz vector. The pure hydrogen atom is a supersymmetric and superintegrable system, since the Hamilton-Jacobi and the Schrödinger equations are separable in several different coordinate systems and has an exact analytical solution. The Schrödinger equation for a hydrogen atom in a uniform electric field (Stark effect) is separable in parabolic coordinates. The system has two conserved quantities: z-projections of the generalized Runge-Lenz vector and of the angular momentum. The problem is integrable and has the symmetry group SO(2)xSO(2). The ion of the hydrogen molecule (problem of two Coulomb centers) has similar symmetry group SO(2)xSO(2) generated by two conserved z-projections of the generalized Runge-Lenz and of the angular momentum on the internuclear axis. The corresponding Schrödinger equation is separable in the elliptical coordinates. For the hydrogen atom in a uniform magnetic field, the respective Schrödinger equation is not separable. The problem is non-separable and non-integrable and is considered as a representative example of quantum chaos that cannot be solved by any analytical method. Nevertheless, an exact analytical solution describing the quantum states of a hydrogen atom in a uniform magnetic field can be obtained as a convergent power series in two variables, the radius and the sine of the polar angle. The energy levels and wave functions for the ground and excited states can be calculated exactly, with any desired accuracy, for an arbitrary strength of the magnetic field. Therefore, the problem can be considered superintegrable, although it does not possess supersymmetry and additional integrals of motion.
△ Less
Submitted 30 June, 2022; v1 submitted 3 March, 2022;
originally announced March 2022.
-
Early Stages of Flame Propagation in Tubes with No-slip Walls and the Mechanism of Tulip Flame Formation
Authors:
Chengeng Qian,
Cheng Wang,
Michael A. Liberman
Abstract:
The early stages of flames propagation in tubes with no-slip walls and the inversion of the flame front from a convex shape directed towards unburned gas to a concave shape with a cusp directed to the burned gas, known as a tulip flame, was investigated for closed and half-open tubes by solving the fully compressible reactive Navier-Stokes equations with a one-step Arrhenius chemical model for the…
▽ More
The early stages of flames propagation in tubes with no-slip walls and the inversion of the flame front from a convex shape directed towards unburned gas to a concave shape with a cusp directed to the burned gas, known as a tulip flame, was investigated for closed and half-open tubes by solving the fully compressible reactive Navier-Stokes equations with a one-step Arrhenius chemical model for the highly reactive hydrogen/air and slowly reacting methane/air mixtures. The development of the tulip flame in hydrogen/air obtained in simulations with a one-step Arrhenius model was compared with simulations using a detailed chemical model. It is shown that the inversion of the flame front and the onset of the tulip flame occurs due to rarefaction waves generated by the decelerating flame when its surface was reduced due to extinguishing of the rear parts of the flame skirt at the sidewalls. The rarefaction waves reduce the flow velocity ahead of the flame, creating an uneven velocity profile, which facilitate the flame front inversion. In the case of a flame propagating in a tube with both ends closed, the compression wave reflected from the tube end opposite to the ignition end, also contribute to the inversion of the flame front. In the case of fast flames and a relatively short tube with both closed ends, the rarefaction waves may invert the flow velocities in the unburned gas towards the propagating flame. The tulip flame formation mechanism is a purely gas-dynamic phenomenon not associated with flame instabilities or vortex motion, in agreement with the conclusion obtained in recent experimental studies [1].
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Autoignition and detonation development from a hot spot inside a closed chamber: effects of end wall reflection
Authors:
Peng Dai,
Zheng Chen,
Xiaohua Gan,
Mikhail A. Liberman
Abstract:
The advancement of highly boosted internal combustion engines (ICEs) with high thermal efficiency is mainly constrained by knock and super-knock respectively due to the end gas autoignition and detonation development. At the end of the compression stroke, the pressure wave propagation and reflection in a small confined space may greatly influence the end gas autoignition, leading to different auto…
▽ More
The advancement of highly boosted internal combustion engines (ICEs) with high thermal efficiency is mainly constrained by knock and super-knock respectively due to the end gas autoignition and detonation development. At the end of the compression stroke, the pressure wave propagation and reflection in a small confined space may greatly influence the end gas autoignition, leading to different autoignition characteristics from those in a large or open space. The present study investigates the transient autoignition process in an iso-octane/air mixture inside a closed chamber under engine-relevant conditions. The emphasis is given to the assessing effects of the pressure wave-wall reflection and the mechanism of extremely strong pressure oscillations typical for super-knock. It is found that the hot spot induced autoignition in a closed chamber can be greatly affected by shock/pressure wave reflection from the end wall. Different autoignition modes respectively from the hot spot and end wall reflection are identified. A non-dimensional parameter quantifying the interplay between different length and time scales is introduced, which helps to identify different autoignition regimes including detonation development near the end wall. It is shown that detonation development from the hot spot may cause super-knock with devastating pressure oscillation. However, the detonation development from the end wall can hardly produce pressure oscillation strong enough for the super-knock. The obtained results provide a fundamental insight into the knocking mechanism in engines under highly boosted conditions.
△ Less
Submitted 8 October, 2019;
originally announced October 2019.
-
Convergence properties of detonation simulations
Authors:
Chengeng Qian,
Cheng Wang,
JianNan Liu,
Axel Brandenburg,
Nils E. L. Haugen,
Mikhail Liberman
Abstract:
We present a high-resolution convergence study of detonation initiated by a temperature gradient in a stoichiometric hydrogen-oxygen mixture using the Pencil Code and compare with a code that employs a fifth order weighted essentially non-oscillating (WENO) scheme. With Mach numbers reaching 10-30, a certain amount of shock viscosity is needed in the Pencil Code to remove or reduce numerical press…
▽ More
We present a high-resolution convergence study of detonation initiated by a temperature gradient in a stoichiometric hydrogen-oxygen mixture using the Pencil Code and compare with a code that employs a fifth order weighted essentially non-oscillating (WENO) scheme. With Mach numbers reaching 10-30, a certain amount of shock viscosity is needed in the Pencil Code to remove or reduce numerical pressure oscillations on the grid scale at the position of the shock. Detonation is found to occur for intermediate values of the shock viscosity parameter. At fixed values of this parameter, the numerical error associated with those small wiggles in the pressure profile is found to decrease with decreasing mesh width $δx$ like $δx^{-1.4}$ down to $δx=0.2μ$m. With the WENO scheme, solutions are smooth at $δx=10μ$m, but no detonation is obtained for $δx=5μ$m. This is argued to be an artifact of a decoupling between pressure and reaction fronts.
△ Less
Submitted 15 September, 2019; v1 submitted 11 February, 2019;
originally announced February 2019.
-
Turbulent Clustering of Particles and Radiation Induced Ignition of Dust Explosions
Authors:
Michael Liberman,
Nathan Kleeorin,
Igor Rogachevskii,
Nils Haugen
Abstract:
Since detonation is the only established theory that allows rapid burning producing a high pressure that can be sustained in open areas, the generally accepted opinion was that the mechanism explaining the high rate of combustion in dust explosions is deflagration-to-detonation transition. We propose a theoretical substantiation of an alternative mechanism explaining the origin of the secondary ex…
▽ More
Since detonation is the only established theory that allows rapid burning producing a high pressure that can be sustained in open areas, the generally accepted opinion was that the mechanism explaining the high rate of combustion in dust explosions is deflagration-to-detonation transition. We propose a theoretical substantiation of an alternative mechanism explaining the origin of the secondary explosion producing high speeds of combustion and high overpressures in unconfined dust explosions. We show that the clustering of dust particles in a turbulent flow ahead of the advancing flame gives rise to a significant increase of the radiation absorption length. This effect ensures that clusters of dust particles are exposed to and heated by radiation from hot combustion products of the primary ignited flame for a sufficiently long time to become multi-point ignition kernels in a large volume ahead of the advancing flame.
△ Less
Submitted 21 August, 2018;
originally announced December 2018.
-
Influence of chemical kinetics on detonation initiating by temperature gradients in methane/air
Authors:
Cheng Wang,
Chengeng Qian,
JianNan Liu,
Mikhail A. Liberman
Abstract:
Different simplified and detailed chemical models and their impact on simulations of combustion regimes initiating by the initial temperature gradient in methane/air mixtures are studied. The limits of the regimes of reaction wave propagation depend upon the spontaneous wave speed and the characteristic velocities of the problem. The present study mainly focus to identify conditions required for t…
▽ More
Different simplified and detailed chemical models and their impact on simulations of combustion regimes initiating by the initial temperature gradient in methane/air mixtures are studied. The limits of the regimes of reaction wave propagation depend upon the spontaneous wave speed and the characteristic velocities of the problem. The present study mainly focus to identify conditions required for the development a detonation and to compare the difference between simplified chemical models and detailed chemistry. It is shown that a widely used simplified chemical schemes, such as one-step, two-step and other simplified models, do not reproduce correctly the ignition process in methane/air mixtures. The ignition delay times calculated using simplified models are in orders of magnitude shorter than the ignition delay times calculated using detailed chemical models and measured experimentally. This results in considerably different times when the exothermic reaction affects significantly the ignition, evolution, and coupling of the spontaneous reaction wave and pressure waves. We show that the temperature gradient capable to trigger detonation calculated using detailed chemical models is much shallower (the size of the hot spot is much larger) than that, predicted by simulations with simplified chemical models. These findings suggest that the scenario leading to the deflagration to detonation transition (DDT) may depend greatly on the chemical model used in simulations and that the Zeldovich gradient mechanism is not necessary a universal mechanism triggering DDT. The obtained results indicate that the conclusions derived from the simulations of DDT with simplified chemical models should be viewed with great caution.
△ Less
Submitted 11 October, 2018;
originally announced November 2018.
-
Influence of chemical kinetics on spontaneous waves and detonation initiation in highly reactive and low reactive mixtures
Authors:
Mikhail Liberman,
Cheng Wang,
Chengeng Qian,
JianNan Liu
Abstract:
Understanding the mechanisms of explosions is important for minimizing devastating hazards. Due to the complexity of real chemistry, a single-step reaction mechanism is usually used for theoretical and numerical studies. The purpose of this study is to look more deeply into the influence of chemistry on detonation initiated by a spontaneous wave. Results of high resolution simulations performed fo…
▽ More
Understanding the mechanisms of explosions is important for minimizing devastating hazards. Due to the complexity of real chemistry, a single-step reaction mechanism is usually used for theoretical and numerical studies. The purpose of this study is to look more deeply into the influence of chemistry on detonation initiated by a spontaneous wave. Results of high resolution simulations performed for one-step models are compared with simulations for detailed chemical models for highly reactive and low reactive mixtures. The calculated induction times for H2/air and for CH4/air are validated against experimental measurements for a wide range of temperatures and pressures. It is found that the requirements in terms of temperature and size of the hot spots, which produce a spontaneous wave capable to initiate detonation, are quantitatively and qualitatively different for one-step models compared to the detailed chemical models. The impact of detailed chemical model is particularly pronounced for the methane-air mixture. In this case, not only the hot spot size is much greater than that predicted by a one-step model, but even at elevated pressure the initiation of detonation by a temperature gradient is possible only if the temperature outside the gradient is so high, that can ignite thermal explosion. The obtained results suggest that the one-step models do not reproduce correctly the transient and ignition processes, so that interpretation of the simulations performed using a one-step model for understanding mechanisms of flame acceleration, DDT and the origin of explosions must be considered with great caution.
△ Less
Submitted 21 August, 2018;
originally announced October 2018.
-
Multipoint Radiation Induced Ignition of Dust Explosions: Turbulent Clustering of Particles and Increased Transparency
Authors:
M. Liberman,
N. Kleeorin,
I. Rogachevskii,
N. E. L. Haugen
Abstract:
It is known that unconfined dust explosions consist of a relatively weak primary (turbulent) deflagrations followed by a devastating secondary explosion. The secondary explosion may propagate with a speed of up to 1000 m/s producing overpressures of over 8-10 atm. Since detonation is the only established theory that allows a rapid burning producing a high pressure that can be sustained in open are…
▽ More
It is known that unconfined dust explosions consist of a relatively weak primary (turbulent) deflagrations followed by a devastating secondary explosion. The secondary explosion may propagate with a speed of up to 1000 m/s producing overpressures of over 8-10 atm. Since detonation is the only established theory that allows a rapid burning producing a high pressure that can be sustained in open areas, the generally accepted view was that the mechanism explaining the high rate of combustion in dust explosions is deflagration to detonation transition. In the present work we propose a theoretical substantiation of the alternative propagation mechanism explaining origin of the secondary explosion producing the high speeds of combustion and high overpressures in unconfined dust explosions. We show that clustering of dust particles in a turbulent flow gives rise to a significant increase of the thermal radiation absorption length ahead of the advancing flame front. This effect ensures that clusters of dust particles are exposed to and heated by the radiation from hot combustion products of large gaseous explosions sufficiently long time to become multi-point ignition kernels in a large volume ahead of the advancing flame front. The ignition times of fuel-air mixture by the radiatively heated clusters of particles is considerably reduced compared to the ignition time by the isolated particle. The radiation-induced multi-point ignitions of a large volume of fuel-air ahead of the primary flame efficiently increase the total flame area, giving rise to the secondary explosion, which results in high rates of combustion and overpressures required to account for the observed level of overpressures and damages in unconfined dust explosions, such as e.g. the 2005 Buncefield explosion and several vapor cloud explosions of severity similar to that of the Buncefield incident.
△ Less
Submitted 28 December, 2017; v1 submitted 8 October, 2017;
originally announced October 2017.
-
Turbulent diffusion of chemically reacting flows: theory and numerical simulations
Authors:
T. Elperin,
N. Kleeorin,
M. Liberman,
A. Lipatnikov,
I. Rogachevskii,
R. Yu
Abstract:
The theory of turbulent diffusion of chemically reacting gaseous admixtures developed previously (Phys. Rev. E {\bf 90}, 053001, 2014) is generalized for large yet finite Reynolds numbers, and the dependence of turbulent diffusion coefficient versus two parameters, the Reynolds number and Damköhler number (which characterizes a ratio of turbulent and reaction time scales) is obtained. Three-dimens…
▽ More
The theory of turbulent diffusion of chemically reacting gaseous admixtures developed previously (Phys. Rev. E {\bf 90}, 053001, 2014) is generalized for large yet finite Reynolds numbers, and the dependence of turbulent diffusion coefficient versus two parameters, the Reynolds number and Damköhler number (which characterizes a ratio of turbulent and reaction time scales) is obtained. Three-dimensional direct numerical simulations (DNS) of a finite thickness reaction wave for the first-order chemical reactions propagating in forced, homogeneous, isotropic, and incompressible turbulence are performed to validate the theoretically predicted effect of chemical reactions on turbulent diffusion. It is shown that the obtained DNS results are in a good agreement with the developed theory.
△ Less
Submitted 19 August, 2017; v1 submitted 8 December, 2016;
originally announced December 2016.
-
Mechanism of unconfined dust explosions: turbulent clustering and radiation-induced ignition
Authors:
M. Liberman,
N. Kleeorin,
I. Rogachevskii,
N. E. L. Haugen
Abstract:
It is known that unconfined dust explosions typically starts off with a relatively weak primary flame followed by a severe secondary explosion. We show that clustering of dust particles in a temperature stratified turbulent flow ahead of the primary flame may give rise to a significant increase in the radiation penetration length. These particle clusters, even far ahead of the flame, are sufficien…
▽ More
It is known that unconfined dust explosions typically starts off with a relatively weak primary flame followed by a severe secondary explosion. We show that clustering of dust particles in a temperature stratified turbulent flow ahead of the primary flame may give rise to a significant increase in the radiation penetration length. These particle clusters, even far ahead of the flame, are sufficiently exposed and heated by the radiation from the flame to become ignition kernels capable to ignite a large volume of fuel-air mixtures. This efficiently increases the total flame surface area and the effective combustion speed, defined as the rate of reactant consumption of a given volume. We show that this mechanism explains the high rate of combustion and overpressures required to account for the observed level of damage in unconfined dust explosions, e.g., at the 2005 Buncefield vapor-cloud explosion. The effect of the strong increase of radiation transparency due to turbulent clustering of particles goes beyond the state-of-the-art of the application to dust explosions and has many implications in atmospheric physics and astrophysics.
△ Less
Submitted 10 May, 2017; v1 submitted 22 September, 2016;
originally announced September 2016.
-
Radiation Heat Transfer in Particle-Laden Gaseous Flame: Flame Acceleration and Triggering Detonation
Authors:
M. A. Liberman,
M. F Ivanov,
A. D. Kiverin
Abstract:
In this study we examine influence of the radiation heat transfer on the combustion regimes in the mixture, formed by suspension of fine inert particles in hydrogen gas. The gaseous phase is assumed to be transparent for the thermal radiation, while the radiant heat absorbed by the particles is then lost by conduction to the surrounding gas. The particles and gas ahead of the flame is assumed to b…
▽ More
In this study we examine influence of the radiation heat transfer on the combustion regimes in the mixture, formed by suspension of fine inert particles in hydrogen gas. The gaseous phase is assumed to be transparent for the thermal radiation, while the radiant heat absorbed by the particles is then lost by conduction to the surrounding gas. The particles and gas ahead of the flame is assumed to be heated by radiation from the original flame. It is shown that the maximum temperature increase due to the radiation preheating becomes larger for a flame with lower velocity. For a flame with small enough velocity temperature of the radiation preheating may exceed the crossover temperature, so that the radiation heat transfer may become a dominant mechanism of the flame propagation. In the case of non-uniform distribution of particles, the temperature gradient formed due to the radiation preheating can initiate either deflagration or detonation ahead of the original flame via the Zel'dovich's gradient mechanism. The initiated combustion regime ignited in the preheat zone ahead of the flame depends on the radiation absorption length and on the steepness of the formed temperature gradient. Scenario of the detonation triggering via the temperature gradient mechanism formed due to the radiation preheating is plausible explanation of the transition to detonation in Supernovae Type Ia explosion.
△ Less
Submitted 23 July, 2015;
originally announced July 2015.
-
Influence of the radiation absorbed by micro particles on the flame propagation and combustion regimes
Authors:
M. F. Ivanov,
A. D. Kiverin,
M. A. Liberman
Abstract:
Thermal radiation of the hot combustion products usually does not influence noticeably the flame propagating through gaseous mixture. the situation is changed drastically in the presence even small concentration of particles, which absorb radiation, transfer the heat to the surrounding unburned gaseous mixture by means of heat conduction, so that the gas phase temperature in front of the advancing…
▽ More
Thermal radiation of the hot combustion products usually does not influence noticeably the flame propagating through gaseous mixture. the situation is changed drastically in the presence even small concentration of particles, which absorb radiation, transfer the heat to the surrounding unburned gaseous mixture by means of heat conduction, so that the gas phase temperature in front of the advancing flame lags that of the particles. It is shown that radiative preheating of unreacted mixture ahead of the flame results in a modest increase of the advancing flame velocity for a highly reactive gaseous fuel, or to considerable increase of the flame velocity in the case of a slow reactive mixture. The effects of radiation preheating as stronger as smaller the normal flame velocity. The radiation heat transfer can become a dominant mechanism compared with molecular heat conduction, determining the structure and the speed of combustion wave in the case of a small enough velocity of the advancing flame. It is shown that in the case of non-uniform distribution of the particles, such that time of the radiation heating is longer so that the maximum temperature in the region of denser particles cloud ahead of the advancing flame is sufficient for ignition, the thermal radiation may trigger additional independent source of ignition. Depending on the steepness of the temperature gradient formed in the unburned mixture, either deflagration or detonation can be initiated via the Zeldovich's gradient mechanism. Ignition of different combustion regimes, depending on the radiation absorption length, is illustrated for the particle-laden hydrogen-oxygen flame.
△ Less
Submitted 2 July, 2015;
originally announced July 2015.
-
Ignition of Deflagration and Detonation Ahead of the Flame due to Radiative Preheating of Suspended Micro Particles
Authors:
M. F. Ivanov,
A. D. Kiverin,
M. A. Liberman
Abstract:
We study a flame propagating in the gaseous combustible mixture with suspended inert particles. The gas is assumed to be transparent for the radiation emitted by the combustion products, while particles absorb and re-emit the radiation. Thermal radiation heats the particles, which in turn transfer the heat to the surrounding gaseous mixture by means of heat conduction, so that the gas temperature…
▽ More
We study a flame propagating in the gaseous combustible mixture with suspended inert particles. The gas is assumed to be transparent for the radiation emitted by the combustion products, while particles absorb and re-emit the radiation. Thermal radiation heats the particles, which in turn transfer the heat to the surrounding gaseous mixture by means of heat conduction, so that the gas temperature lags that of the particles. We consider different scenarios depending on the spatial distribution of the particles, their size and the number density. In the case of uniform distribution of the particles the radiation causes a modest increase of the temperature ahead of the flame and the corresponding increase of the flame velocity. The effects of radiation preheating is stronger for a flame with smaller normal velocity. In the case of non-uniform distribution of the particles, such that the particles number density is smaller just ahead of the flame and increases in the distant region ahead of the flame, the preheating caused by the thermal radiation may trigger additional independent source of ignition. This scenario requires the formation of a temperature gradient with the maximum temperature sufficient for ignition in the region of denser particles cloud ahead of the advancing flame. Depending on the steepness of the temperature gradient formed in the unburned mixture, either deflagration or detonation can be initiated via the Zeldovich's gradient mechanism. The ignition and the resulting combustion regimes depend on the temperature profile which is formed in effect of radiation absorption and gas-dynamic expansion. In the case of coal dust flames propagating through a layered dust cloud the effect of radiation heat transfer can result in the propagation of combustion wave with velocity up to 1000m/s and can be a plausible explanation of the origin of dust explosion in coal mines.
△ Less
Submitted 2 July, 2015; v1 submitted 16 June, 2014;
originally announced June 2014.
-
Turbulent diffusion of chemically reacting gaseous admixtures
Authors:
Tov Elperin,
Nathan Kleeorin,
Michael Liberman,
Igor Rogachevskii
Abstract:
We study turbulent diffusion of chemically reacting gaseous admixtures in a developed turbulence. In our previous study [Phys. Rev. Lett. {\bf 80}, 69 (1998)] using a path-integral approach for a delta-correlated in time random velocity field, we demonstrated a strong modification of turbulent transport in fluid flows with chemical reactions or phase transitions. In the present study we use the sp…
▽ More
We study turbulent diffusion of chemically reacting gaseous admixtures in a developed turbulence. In our previous study [Phys. Rev. Lett. {\bf 80}, 69 (1998)] using a path-integral approach for a delta-correlated in time random velocity field, we demonstrated a strong modification of turbulent transport in fluid flows with chemical reactions or phase transitions. In the present study we use the spectral tau approximation, that is valid for large Reynolds and Peclet numbers, and show that turbulent diffusion of the reacting species can be strongly depleted by a large factor that is the ratio of turbulent and chemical times (turbulent Damköhler number). We have demonstrated that the derived theoretical dependence of turbulent diffusion coefficient versus the turbulent Damköhler number is in a good agreement with that obtained previously in the numerical modelling of a reactive front propagating in a turbulent flow and described by the Kolmogorov-Petrovskii-Piskunov-Fisher equation. We have found that turbulent cross-effects, e.g., turbulent mutual diffusion of gaseous admixtures and turbulent Dufour-effect of the chemically reacting gaseous admixtures, are less sensitive to the values of stoichiometric coefficients. The mechanisms of the turbulent cross-effects are different from the molecular cross effects known in irreversible thermodynamics. In a fully developed turbulence and at large Peclet numbers the turbulent cross-effects are much larger than the molecular ones. The obtained results are applicable also to heterogeneous phase transitions.
△ Less
Submitted 8 September, 2014; v1 submitted 30 May, 2014;
originally announced June 2014.
-
Validation of reduced kinetic models for simulations of non-steady combustion processes
Authors:
M. F. Ivanov,
A. D. Kiverin,
M. A. Liberman,
A. E Smygalina
Abstract:
In the present work we compare reliability of several most widely used reduced detailed chemical kinetic schemes for hydrogen-air and hydrogen-oxygen combustible mixtures. The validation of the schemes includes detailed analysis of 0D and 1D calculations and comparison with experimental databases containing data on induction time, equilibrium temperature, composition of the combustion products, la…
▽ More
In the present work we compare reliability of several most widely used reduced detailed chemical kinetic schemes for hydrogen-air and hydrogen-oxygen combustible mixtures. The validation of the schemes includes detailed analysis of 0D and 1D calculations and comparison with experimental databases containing data on induction time, equilibrium temperature, composition of the combustion products, laminar flame speed and the flame front thickness at different pressures. 1D calculations are carried out using the full gasdynamical system for compressible viscous thermal conductive multicomponent mixture. The proper choice of chemical kinetics models is essential for obtaining reliable quantitative and qualitative insight into combustion phenomena such as flame acceleration and stability, ignition, transition from deflagration-to-detonation (DDT) using a multiscale numerical modeling.
△ Less
Submitted 12 December, 2013;
originally announced December 2013.
-
Acceleration of raindrops formation due to tangling-clustering instability in turbulent stratified atmosphere
Authors:
T. Elperin,
N. Kleeorin,
B. Krasovitov,
M. Kulmala,
M. Liberman,
I. Rogachevskii,
S. Zilitinkevich
Abstract:
Condensation of water vapor on active cloud condensation nuclei produces micron-size water droplets. To form rain, they must grow rapidly into at least 50-100 $μ$m droplets. Observations show that this process takes only 15-20 minutes. The unexplained physical mechanism of such fast growth, is crucial for understanding and modeling of rain, and known as "condensation-coalescence bottleneck in rain…
▽ More
Condensation of water vapor on active cloud condensation nuclei produces micron-size water droplets. To form rain, they must grow rapidly into at least 50-100 $μ$m droplets. Observations show that this process takes only 15-20 minutes. The unexplained physical mechanism of such fast growth, is crucial for understanding and modeling of rain, and known as "condensation-coalescence bottleneck in rain formation". We show that the recently discovered phenomenon of the tangling clustering instability of small droplets in temperature-stratified turbulence (Phys. Fluids 25, 085104, 2013) results in the formation of droplet clusters with drastically increased droplet number densities. The mechanism of the tangling clustering instability is much more effective than the previously considered by us the inertial clustering instability caused by the centrifugal effect of turbulent vortices. This is the reason of strong enhancement of the collision-coalescence rate inside the clusters. The mean-field theory of the droplet growth developed in this study can be useful for explanation of the observed fast growth of cloud droplets in warm clouds from the initial 1 micron size droplets to 40-50 micron size droplets within 15-20 minutes.
△ Less
Submitted 17 June, 2015; v1 submitted 11 December, 2013;
originally announced December 2013.
-
Mechanisms of Ignition by Transient Energy Deposition: Regimes of Combustion Waves Propagation
Authors:
Alexey D. Kiverin,
David R. Kassoy,
Mikhail F. Ivanov,
Michael A. Liberman
Abstract:
Regimes of chemical reaction wave propagating in reactive gaseous mixtures, whose chemistry is governed by chain-branching kinetics, are studied depending on the characteristics of a transient thermal energy deposition localized in a finite volume of reactive gas. Different regimes of the reaction wave propagation are initiated depending on the amount of deposited thermal energy, power of the sour…
▽ More
Regimes of chemical reaction wave propagating in reactive gaseous mixtures, whose chemistry is governed by chain-branching kinetics, are studied depending on the characteristics of a transient thermal energy deposition localized in a finite volume of reactive gas. Different regimes of the reaction wave propagation are initiated depending on the amount of deposited thermal energy, power of the source and the size of the hot spot. The main parameters which define regimes of the combustion waves facilitated by the transient deposition of thermal energy are: acoustic timescale, duration of the energy deposition, ignition time scale and size of the hot spot. The interplay between these parameters specifies the role of gasdynamical processes, the formation and steepness of the temperature gradient and speed of the spontaneous wave. The obtained results show how ignition of one or another regime of combustion wave depends on the value of energy, rate of the energy deposition and size of the hot spot, which is important for the practical use and for risk assessment.
△ Less
Submitted 1 May, 2013; v1 submitted 21 February, 2013;
originally announced February 2013.
-
Tangling clustering instability for small particles in temperature stratified turbulence
Authors:
Tov Elperin,
Nathan Kleeorin,
Michael Liberman,
Igor Rogachevskii
Abstract:
We study particle clustering in a temperature stratified turbulence with small finite correlation time. It is shown that the temperature stratified turbulence strongly increases the degree of compressibility of particle velocity field. This results in the strong decrease of the threshold for the excitation of the tangling clustering instability even for small particles. The tangling clustering ins…
▽ More
We study particle clustering in a temperature stratified turbulence with small finite correlation time. It is shown that the temperature stratified turbulence strongly increases the degree of compressibility of particle velocity field. This results in the strong decrease of the threshold for the excitation of the tangling clustering instability even for small particles. The tangling clustering instability in the temperature stratified turbulence is essentially different from the inertial clustering instability that occurs in non-stratified isotropic and homogeneous turbulence. While the inertial clustering instability is caused by the centrifugal effect of the turbulent eddies, the mechanism of the tangling clustering instability is related to the temperature fluctuations generated by the tangling of the mean temperature gradient by the velocity fluctuations. Temperature fluctuations produce pressure fluctuations and cause particle clustering in regions with increased pressure fluctuations. It is shown that the growth rate of the tangling clustering instability is much larger than that of the inertial clustering instability. It is found that depending on the parameters of the turbulence and the mean temperature gradient there is a preferential particle size at which the particle clustering due to the tangling clustering instability is more effective. The particle number density inside the cluster after the saturation of this instability can be in several orders of magnitude larger than the mean particle number density. It is also demonstrated that the evaporation of droplets drastically change the tangling clustering instability, e.g., it increases the instability threshold in the droplet radius. The tangling clustering instability is of a great importance, e.g., in atmospheric turbulence with temperature inversions.
△ Less
Submitted 25 June, 2013; v1 submitted 4 February, 2013;
originally announced February 2013.
-
Clustering of Aerosols in Atmospheric Turbulent Flow
Authors:
T. Elperin,
N. Kleeorin,
M. A. Liberman,
V. L'vov,
I. Rogachevskii
Abstract:
A mechanism of formation of small-scale inhomogeneities in spatial distributions of aerosols and droplets associated with clustering instability in the atmospheric turbulent flow is discussed. The particle clustering is a consequence of a spontaneous breakdown of their homogeneous space distribution due to the clustering instability, and is caused by a combined effect of the particle inertia and…
▽ More
A mechanism of formation of small-scale inhomogeneities in spatial distributions of aerosols and droplets associated with clustering instability in the atmospheric turbulent flow is discussed. The particle clustering is a consequence of a spontaneous breakdown of their homogeneous space distribution due to the clustering instability, and is caused by a combined effect of the particle inertia and a finite correlation time of the turbulent velocity field. In this paper a theoretical approach proposed in Phys. Rev. E 66, 036302 (2002) is further developed and applied to investigate the mechanisms of formation of small-scale aerosol inhomogeneities in the atmospheric turbulent flow. The theory of the particle clustering instability is extended to the case when the particle Stokes time is larger than the Kolmogorov time scale, but is much smaller than the correlation time at the integral scale of turbulence. We determined the criterion of the clustering instability for the Stokes number larger than 1. We discussed applications of the analyzed effects to the dynamics of aerosols and droplets in the atmospheric turbulent flow.
△ Less
Submitted 15 February, 2007;
originally announced February 2007.
-
Nonlinear Theory of Flame Front Instability
Authors:
Kirill A. Kazakov,
Michael A. Liberman
Abstract:
Nonlinear non-stationary equation describing evolution of weakly curved premixed flames with arbitrary gas expansion, subject to the Landau-Darrieus instability, is derived. The new equation respects all the conservation laws to be satisfied across the flame front, as well as correctly takes into account influence of vorticity, generated in the flame, on the flame front structure and flame veloc…
▽ More
Nonlinear non-stationary equation describing evolution of weakly curved premixed flames with arbitrary gas expansion, subject to the Landau-Darrieus instability, is derived. The new equation respects all the conservation laws to be satisfied across the flame front, as well as correctly takes into account influence of vorticity, generated in the flame, on the flame front structure and flame velocity. Analytical solutions of the derived equation are found.
△ Less
Submitted 28 August, 2001;
originally announced August 2001.
-
Nonlinear equation for curved stationary flames
Authors:
Kirill A. Kazakov,
Michael A. Liberman
Abstract:
A nonlinear equation describing curved stationary flames with arbitrary gas expansion $θ= ρ_{\rm fuel}/ρ_{\rm burnt}$, subject to the Landau-Darrieus instability, is obtained in a closed form without an assumption of weak nonlinearity. It is proved that in the scope of the asymptotic expansion for $θ\to 1,$ the new equation gives the true solution to the problem of stationary flame propagation w…
▽ More
A nonlinear equation describing curved stationary flames with arbitrary gas expansion $θ= ρ_{\rm fuel}/ρ_{\rm burnt}$, subject to the Landau-Darrieus instability, is obtained in a closed form without an assumption of weak nonlinearity. It is proved that in the scope of the asymptotic expansion for $θ\to 1,$ the new equation gives the true solution to the problem of stationary flame propagation with the accuracy of the sixth order in $θ- 1.$ In particular, it reproduces the stationary version of the well-known Sivashinsky equation at the second order corresponding to the approximation of zero vorticity production. At higher orders, the new equation describes influence of the vorticity drift behind the flame front on the front structure. Its asymptotic expansion is carried out explicitly, and the resulting equation is solved analytically at the third order. For arbitrary values of $θ,$ the highly nonlinear regime of fast flow burning is investigated, for which case a large flame velocity expansion of the nonlinear equation is proposed.
△ Less
Submitted 25 June, 2001;
originally announced June 2001.
