-
Realizing a spatially correlated lattice interferometer
Authors:
Peng Peng,
Dekai Mao,
Yi Liang,
Guoling Yin,
Hongmian Shui,
Bo Song,
Xiaoji Zhou
Abstract:
Atom interferometers provide a powerful tool for measuring physical constants and testifying fundamental physics with unprecedented precision. Conventional atom interferometry focuses on the phase difference between two paths and utilizes matter waves with fixed coherence. Here, we report on realizing a Ramsey-Bordé interferometer of coherent matter waves dressed by a moving optical lattice in the…
▽ More
Atom interferometers provide a powerful tool for measuring physical constants and testifying fundamental physics with unprecedented precision. Conventional atom interferometry focuses on the phase difference between two paths and utilizes matter waves with fixed coherence. Here, we report on realizing a Ramsey-Bordé interferometer of coherent matter waves dressed by a moving optical lattice in the gravity direction, and explore the resulting interference along multiple paths with tunable coherence. We investigate spatial correlations of atoms both within the lattice and between two arms by interferometry, and observe the emerging multiple interference peaks owing to the long-range coherence nature of the Bose-Einstein condensate. Our findings agree well with theoretical simulations, paving the way for high-precision interferometry with ultracold atoms.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Hybrid atom-photon entangling gates via Gaussian soft control
Authors:
Wanrang Yu,
Qiuyu Yin,
Yanzhao Liang,
Ning Ji,
Thibault Vogt
Abstract:
Hybrid atom-photon gates play an important role for the realization of a quantum interface capable of map** atomic states to photons for communication across quantum networks. Here, we propose a feasible theoretical scheme for implementing a hybrid atom-photon controlled-Z gate between an atom and a microwave photon in a superconducting coplanar waveguide resonator based on the Gaussian soft con…
▽ More
Hybrid atom-photon gates play an important role for the realization of a quantum interface capable of map** atomic states to photons for communication across quantum networks. Here, we propose a feasible theoretical scheme for implementing a hybrid atom-photon controlled-Z gate between an atom and a microwave photon in a superconducting coplanar waveguide resonator based on the Gaussian soft control technique. The gate protocol employs a classical auxiliary field that induces an atomic transition between one state of the atomic qubit and Rydberg states for obtaining strong coupling of the atom and microwave resonator. By tailoring the amplitude of this field with Gaussian temporal modulation, the gate performances are improved in various aspects. Numerical simulations demonstrate that the controlled-Z gate based on Gaussian soft control is resilient to the variation of the atom-photon coupling strength, deviation in the gate time, and less sensitive to the Rydberg level shifts caused by stray electric fields.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Compact low-half-wave-voltage thin film lithium niobate electro-optic phase modulator fabricated by photolithography assisted chemo-mechanical etching
Authors:
Lang Gao,
Youting Liang,
**ming Chen,
Jian** Yu,
Jia Qi,
Lvbin Song,
Jian Liu,
Zhaoxiang Liu,
Hongxin Qi,
Ya Cheng
Abstract:
This paper presents a compact dual-arm thin film lithium niobate (TFLN) electro-optic phase modulator fabricated using the photolithography-assisted chemo-mechanical etching (PLACE) technique. The design of the device allows for complete utilization of the microwave electric field, doubling the modulation efficiency compared to single-arm modulators in theory. With a half-wave voltage of approxima…
▽ More
This paper presents a compact dual-arm thin film lithium niobate (TFLN) electro-optic phase modulator fabricated using the photolithography-assisted chemo-mechanical etching (PLACE) technique. The design of the device allows for complete utilization of the microwave electric field, doubling the modulation efficiency compared to single-arm modulators in theory. With a half-wave voltage of approximately 3 V and a modulation length of 1 cm, the device outperforms conventional phase modulators. Furthermore, the phase modulator exhibits low sensitivity to optical wavelengths in the range of 1510-1600 nm and offers a low insertion loss of 2.8 dB. The capability to generate multiple sideband signals for optical frequency comb applications is also demonstrated, producing 29 sideband signals at an input microwave power of 2 W.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Optimizing Four-Wave Mixing in Rydberg Atoms for Microwave-Optical Conversion
Authors:
Ning Ji,
Yanzhao Liang,
Wanrang Yu,
Qiuyu Yin,
Thibault Vogt
Abstract:
We perform a numerical and analytical investigation of microwave-to-optical conversion based on four-wave mixing in Rydberg atoms. Our work demonstrates that both all-resonant and off-resonant frequency-mixing configurations achieve near-unit photon conversion efficiencies. We review the conditions that can lead to the presence of two possible dark states. We find that for both configurations, one…
▽ More
We perform a numerical and analytical investigation of microwave-to-optical conversion based on four-wave mixing in Rydberg atoms. Our work demonstrates that both all-resonant and off-resonant frequency-mixing configurations achieve near-unit photon conversion efficiencies. We review the conditions that can lead to the presence of two possible dark states. We find that for both configurations, one of the dark states can be detrimental at high microwave powers, and show that an additional limitation to all-resonant frequency mixing is microwave-induced fluorescence. Finally, we confirm that the off-resonant configuration is more appropriate as it allows for efficient photon conversion on a wider range of input microwave intensities with reduced total power of the auxiliary fields.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Assessing Proton-Boron Fusion Feasibility under non-Thermal Equilibrium Conditions: Rider's Inhibition Revisited
Authors:
S. J. Liu,
D. Wu,
B. Liu,
Y. -K. M. Peng,
J. Q. Dong,
T. Y. Liang,
Z. M. Sheng
Abstract:
Compared to the D-T reaction, the neutron-free proton-boron (p-$^{11}$B) fusion has garnered increasing attention in recent years. However, significant Bremsstrahlung losses pose a formidable challenge in p-$^{11}$B plasmas in achieving $Q>1$ in thermal equilibrium. The primary aim of this study is to corroborate Todd H. Rider's seminal work in the 1997 Physics of Plasmas, who investigated the fea…
▽ More
Compared to the D-T reaction, the neutron-free proton-boron (p-$^{11}$B) fusion has garnered increasing attention in recent years. However, significant Bremsstrahlung losses pose a formidable challenge in p-$^{11}$B plasmas in achieving $Q>1$ in thermal equilibrium. The primary aim of this study is to corroborate Todd H. Rider's seminal work in the 1997 Physics of Plasmas, who investigated the feasibility of sustaining p-$^{11}$B fusion under non-thermal equilibrium conditions. Employing a series of simulations with new fusion cross-section, we assessed the minimum recirculating power that must be recycled to maintain the system's non-thermal equilibrium and found that it is substantially greater than the fusion power output, aligning with Rider's conclusions, whether under the conditions of non-Maxwellian electron distribution or Maxwellian electron distribution, reactors reliant on non-equilibrium plasmas for p-$^{11}$B fusion are unlikely to achieve net power production without the aid of highly efficient external heat engines. However, maintaining the ion temperature at 300 keV and the Coulomb logarithm at 15, while increasing the electron temperature beyond 23.33 keV set by Rider, leads to diminished electron-ion energy transfer and heightened Bremsstrahlung radiation. When the electron temperature approaches approximately 140 keV, this progression ultimately leads to a scenario where the power of Bremsstrahlung loss equals the power of electron-ion interactions, yet remains inferior to the fusion power. Consequently, this results in a net gain in energy production.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Estimating the Impact of Social Distance Policy in Mitigating COVID-19 Spread with Factor-Based Imputation Approach
Authors:
Difang Huang,
Ying Liang,
Boyao Wu,
Yanyi Ye
Abstract:
We identify the effectiveness of social distancing policies in reducing the transmission of the COVID-19 spread. We build a model that measures the relative frequency and geographic distribution of the virus growth rate and provides hypothetical infection distribution in the states that enacted the social distancing policies, where we control time-varying, observed and unobserved, state-level hete…
▽ More
We identify the effectiveness of social distancing policies in reducing the transmission of the COVID-19 spread. We build a model that measures the relative frequency and geographic distribution of the virus growth rate and provides hypothetical infection distribution in the states that enacted the social distancing policies, where we control time-varying, observed and unobserved, state-level heterogeneities. Using panel data on infection and deaths in all US states from February 20 to April 20, 2020, we find that stay-at-home orders and other types of social distancing policies significantly reduced the growth rate of infection and deaths. We show that the effects are time-varying and range from the weakest at the beginning of policy intervention to the strongest by the end of our sample period. We also found that social distancing policies were more effective in states with higher income, better education, more white people, more democratic voters, and higher CNN viewership.
△ Less
Submitted 20 May, 2024;
originally announced May 2024.
-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Quality assurance of organs-at-risk delineation in radiotherapy
Authors:
Yihao Zhao,
Cuiyun Yuan,
Ying Liang,
Yang Li,
Chunxia Li,
Man Zhao,
Jun Hu,
Wei Liu,
Chenbin Liu
Abstract:
The delineation of tumor target and organs-at-risk is critical in the radiotherapy treatment planning. Automatic segmentation can be used to reduce the physician workload and improve the consistency. However, the quality assurance of the automatic segmentation is still an unmet need in clinical practice. The patient data used in our study was a standardized dataset from AAPM Thoracic Auto-Segmenta…
▽ More
The delineation of tumor target and organs-at-risk is critical in the radiotherapy treatment planning. Automatic segmentation can be used to reduce the physician workload and improve the consistency. However, the quality assurance of the automatic segmentation is still an unmet need in clinical practice. The patient data used in our study was a standardized dataset from AAPM Thoracic Auto-Segmentation Challenge. The OARs included were left and right lungs, heart, esophagus, and spinal cord. Two groups of OARs were generated, the benchmark dataset manually contoured by experienced physicians and the test dataset automatically created using a software AccuContour. A resnet-152 network was performed as feature extractor, and one-class support vector classifier was used to determine the high or low quality. We evaluate the model performance with balanced accuracy, F-score, sensitivity, specificity and the area under the receiving operator characteristic curve. We randomly generated contour errors to assess the generalization of our method, explored the detection limit, and evaluated the correlations between detection limit and various metrics such as volume, Dice similarity coefficient, Hausdorff distance, and mean surface distance. The proposed one-class classifier outperformed in metrics such as balanced accuracy, AUC, and others. The proposed method showed significant improvement over binary classifiers in handling various types of errors. Our proposed model, which introduces residual network and attention mechanism in the one-class classification framework, was able to detect the various types of OAR contour errors with high accuracy. The proposed method can significantly reduce the burden of physician review for contour delineation.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Search for solar axions by Primakoff effect with the full dataset of the CDEX-1B Experiment
Authors:
L. T. Yang,
S. K. Liu,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
J. R. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (61 additional authors not shown)
Abstract:
We present the first limit on $g_{Aγ}$ coupling constant using the Bragg-Primakoff conversion based on an exposure of 1107.5 kg days of data from the CDEX-1B experiment at the China **** Underground Laboratory. The data are consistent with the null signal hypothesis, and no excess signals are observed. Limits of the coupling $g_{Aγ}<2.08\times10^{-9}$ GeV$^{-1}$ (95\% C.L.) are derived for axio…
▽ More
We present the first limit on $g_{Aγ}$ coupling constant using the Bragg-Primakoff conversion based on an exposure of 1107.5 kg days of data from the CDEX-1B experiment at the China **** Underground Laboratory. The data are consistent with the null signal hypothesis, and no excess signals are observed. Limits of the coupling $g_{Aγ}<2.08\times10^{-9}$ GeV$^{-1}$ (95\% C.L.) are derived for axions with mass up to 100 eV/$c^2$. Within the hadronic model of KSVZ, our results exclude axion mass $>5.3~\rm{eV}/c^2$ at 95\% C.L.
△ Less
Submitted 12 May, 2024;
originally announced May 2024.
-
A manufacturable platform for photonic quantum computing
Authors:
Koen Alexander,
Andrea Bahgat,
Avishai Benyamini,
Dylan Black,
Damien Bonneau,
Stanley Burgos,
Ben Burridge,
Geoff Campbell,
Gabriel Catalano,
Alex Ceballos,
Chia-Ming Chang,
CJ Chung,
Fariba Danesh,
Tom Dauer,
Michael Davis,
Eric Dudley,
** Er-Xuan,
Josep Fargas,
Alessandro Farsi,
Colleen Fenrich,
Jonathan Frazer,
Masaya Fukami,
Yogeeswaran Ganesan,
Gary Gibson,
Mercedes Gimeno-Segovia
, et al. (70 additional authors not shown)
Abstract:
Whilst holding great promise for low noise, ease of operation and networking, useful photonic quantum computing has been precluded by the need for beyond-state-of-the-art components, manufactured by the millions. Here we introduce a manufacturable platform for quantum computing with photons. We benchmark a set of monolithically-integrated silicon photonics-based modules to generate, manipulate, ne…
▽ More
Whilst holding great promise for low noise, ease of operation and networking, useful photonic quantum computing has been precluded by the need for beyond-state-of-the-art components, manufactured by the millions. Here we introduce a manufacturable platform for quantum computing with photons. We benchmark a set of monolithically-integrated silicon photonics-based modules to generate, manipulate, network, and detect photonic qubits, demonstrating dual-rail photonic qubits with $99.98\% \pm 0.01\%$ state preparation and measurement fidelity, Hong-Ou-Mandel quantum interference between independent photon sources with $99.50\%\pm0.25\%$ visibility, two-qubit fusion with $99.22\%\pm0.12\%$ fidelity, and a chip-to-chip qubit interconnect with $99.72\%\pm0.04\%$ fidelity, not accounting for loss. In addition, we preview a selection of next generation technologies, demonstrating low-loss silicon nitride waveguides and components, fabrication-tolerant photon sources, high-efficiency photon-number-resolving detectors, low-loss chip-to-fiber coupling, and barium titanate electro-optic phase shifters.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
First Search for Light Fermionic Dark Matter Absorption on Electrons Using Germanium Detector in CDEX-10 Experiment
Authors:
J. X. Liu,
L. T. Yang,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
J. R. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (61 additional authors not shown)
Abstract:
We present the first results of the search for sub-MeV fermionic dark matter absorbed by electron targets of Germanium using the 205.4~kg$\cdot$day data collected by the CDEX-10 experiment, with the analysis threshold of 160~eVee. No significant dark matter (DM) signals over the background are observed. Results are presented as limits on the cross section of DM--electron interaction. We present ne…
▽ More
We present the first results of the search for sub-MeV fermionic dark matter absorbed by electron targets of Germanium using the 205.4~kg$\cdot$day data collected by the CDEX-10 experiment, with the analysis threshold of 160~eVee. No significant dark matter (DM) signals over the background are observed. Results are presented as limits on the cross section of DM--electron interaction. We present new constraints of cross section in the DM range of 0.1--10 keV/$c^2$ for vector and axial-vector interaction. The upper limit on the cross section is set to be $\rm 5.5\times10^{-46}~cm^2$ for vector interaction, and $\rm 1.8\times10^{-46}~cm^2$ for axial-vector interaction at DM mass of 5 keV/$c^2$.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Electron acceleration and X-ray generation from near-critical-density carbon nanotube foams driven by moderately relativistic lasers
Authors:
Zhuo Pan,
Jianbo Liu,
Pengjie Wang,
Zhusong Mei,
Zhengxuan Cao,
Defeng Kong,
Shirui Xu,
Zhipeng Liu,
Yulan Liang,
Ziyang Peng,
Tianqi Xu,
Tan Song,
Xun Chen,
Qingfan Wu,
Yujia Zhang,
Qihang Han,
Haoran Chen,
Jiarui Zhao,
Ying Gao,
Shiyou Chen,
Yanying Zhao,
Xueqing Yan,
Yinren Shou,
Wenjun Ma
Abstract:
Direct laser acceleration of electrons in near-critical-density (NCD) carbon nanotube foams (CNFs) has its advantages in the high-efficiency generation of relativistic electrons and broadband X-rays. Here, we report the first simultaneous measurement on the spectra of laser-driven electrons and X-rays from CNFs at moderately relativistic intensities of around 5\times{10}^{19}\ W/cm^2.\ The density…
▽ More
Direct laser acceleration of electrons in near-critical-density (NCD) carbon nanotube foams (CNFs) has its advantages in the high-efficiency generation of relativistic electrons and broadband X-rays. Here, we report the first simultaneous measurement on the spectra of laser-driven electrons and X-rays from CNFs at moderately relativistic intensities of around 5\times{10}^{19}\ W/cm^2.\ The density and thickness of the CNFs were scanned in the experiments, indicating the optimized electrons temperature of 5.5 MeV and X-ray critical energy of 5 keV. Two-dimensional (2D) particle-in-cell (PIC) simulations confirm that the electrons, with a temperature significantly higher than the pondermotive scale, are directly accelerated by the laser along the NCD plasma channel, while the bright X-rays are emitted by these electrons through betatron radiation or Thomson backscattering inside the channel. The simultaneously generated electrons and X-rays, automatically synchronized with the femtosecond laser driver, are suitable for applications such as bi-modal radiography.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Constraints on the Blazar-Boosted Dark Matter from the CDEX-10 Experiment
Authors:
R. Xu,
L. T. Yang,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
S. M. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (59 additional authors not shown)
Abstract:
We report new constraints on light dark matter (DM) boosted by blazars using the 205.4 kg day data from the CDEX-10 experiment located at the China **** Underground Laboratory. Two representative blazars, TXS 0506+56 and BL Lacertae are studied. The results derived from TXS 0506+56 exclude DM-nucleon elastic scattering cross sections from $4.6\times 10^{-33}\ \rm cm^2$ to…
▽ More
We report new constraints on light dark matter (DM) boosted by blazars using the 205.4 kg day data from the CDEX-10 experiment located at the China **** Underground Laboratory. Two representative blazars, TXS 0506+56 and BL Lacertae are studied. The results derived from TXS 0506+56 exclude DM-nucleon elastic scattering cross sections from $4.6\times 10^{-33}\ \rm cm^2$ to $1\times10^{-26}\ \rm cm^2$ for DM masses between 10 keV and 1 GeV, and the results derived from BL Lacertae exclude DM-nucleon elastic scattering cross sections from $2.4\times 10^{-34}\ \rm cm^2$ to $1\times10^{-26}\ \rm cm^2$ for the same range of DM masses. The constraints correspond to the best sensitivities among solid-state detector experiments in the sub-MeV mass range.
△ Less
Submitted 29 March, 2024;
originally announced March 2024.
-
Probing Dark Matter Particles from Evaporating Primordial Black Holes via Electron Scattering in the CDEX-10 Experiment
Authors:
Z. H. Zhang,
L. T. Yang,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
S. M. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (59 additional authors not shown)
Abstract:
Dark matter (DM) is a major constituent of the Universe. However, no definite evidence of DM particles (denoted as ``$χ$") has been found in DM direct detection (DD) experiments to date. There is a novel concept that detecting $χ$ from evaporating primordial black holes (PBHs). We search for $χ$ emitted from PBHs by investigating their interaction with target electrons. The examined PBH masses ran…
▽ More
Dark matter (DM) is a major constituent of the Universe. However, no definite evidence of DM particles (denoted as ``$χ$") has been found in DM direct detection (DD) experiments to date. There is a novel concept that detecting $χ$ from evaporating primordial black holes (PBHs). We search for $χ$ emitted from PBHs by investigating their interaction with target electrons. The examined PBH masses range from 1$\times$10$^{15}$ to 7$\times$10$^{16}$ g under the current limits of PBH abundance $f_{PBH}$. Using 205.4 kg$\cdot$day data obtained from the CDEX-10 experiment conducted in the China **** Underground Laboratory, we exclude the $χ$--electron ($χ$--$e$) elastic-scattering cross section $σ_{χe} \sim 5\times10^{-29}$ cm$^2$ for $χ$ with a mass $m_χ\lesssim$ 0.1 keV from our results. If ($m_χ$, $σ_{χe}$) can be determined in the future, DD experiments are expected to impose strong constraints on $f_{PBH}$ for large $M_{PBH}$s.
△ Less
Submitted 29 March, 2024;
originally announced March 2024.
-
Spatio-Temporal Fluid Dynamics Modeling via Physical-Awareness and Parameter Diffusion Guidance
Authors:
Hao Wu,
Fan Xu,
Yifan Duan,
Ziwei Niu,
Weiyan Wang,
Gaofeng Lu,
Kun Wang,
Yuxuan Liang,
Yang Wang
Abstract:
This paper proposes a two-stage framework named ST-PAD for spatio-temporal fluid dynamics modeling in the field of earth sciences, aiming to achieve high-precision simulation and prediction of fluid dynamics through spatio-temporal physics awareness and parameter diffusion guidance. In the upstream stage, we design a vector quantization reconstruction module with temporal evolution characteristics…
▽ More
This paper proposes a two-stage framework named ST-PAD for spatio-temporal fluid dynamics modeling in the field of earth sciences, aiming to achieve high-precision simulation and prediction of fluid dynamics through spatio-temporal physics awareness and parameter diffusion guidance. In the upstream stage, we design a vector quantization reconstruction module with temporal evolution characteristics, ensuring balanced and resilient parameter distribution by introducing general physical constraints. In the downstream stage, a diffusion probability network involving parameters is utilized to generate high-quality future states of fluids, while enhancing the model's generalization ability by perceiving parameters in various physical setups. Extensive experiments on multiple benchmark datasets have verified the effectiveness and robustness of the ST-PAD framework, which showcase that ST-PAD outperforms current mainstream models in fluid dynamics modeling and prediction, especially in effectively capturing local representations and maintaining significant advantages in OOD generations.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
3D Printed Waveguide for Augmented Reality
Authors:
Dechuan Sun,
Gregory Tanyi,
Alan Lee,
Chris French,
Younger Liang,
Christina Lim,
Ranjith R Unnithan
Abstract:
Mass production of augmented reality (AR) waveguides has been challenging due to the intricate nature of the fabrication technique and the high precision required for its optical characteristics. In this paper, we have presented a novel and low-cost approach for fabricating geometric optical waveguides designed for AR applications utilizing 3D printing techniques. To strike a balance between optic…
▽ More
Mass production of augmented reality (AR) waveguides has been challenging due to the intricate nature of the fabrication technique and the high precision required for its optical characteristics. In this paper, we have presented a novel and low-cost approach for fabricating geometric optical waveguides designed for AR applications utilizing 3D printing techniques. To strike a balance between optical performance and fabrication feasibility, we have optimized the conventional geometric waveguide design to facilitate easier fabrication. It is worth noting that our proposed method does not require molding, dicing, and post-surface polishing after printing. A prototype based on this method has been successfully fabricated, showing the immersion between the virtual image and the real-world scene. The proposed method has great potential for adaptation to mass production in various AR applications.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Intrinsic Orbital Angular Momentum Originated from Optical Catastrophe Superposition
Authors:
Nana Liu,
Huanpeng Liang,
Liu Tan,
Kaijian Chen,
Xiaofang Lu,
Shaozhou Jiang,
Bingsuo Zou,
Peilong Hong,
**gjun Xu,
Yi Liang
Abstract:
Conventionally, intrinsic orbital angular momentum (OAM) is associated with phase vortices. However, our investigation into the propagation dynamics of 2D superimposed catastrophe beams, termed cyclone catastrophe beams (CCBs), reveals that these beams inherently exhibit rotation and possess OAM, distinct from the typical connection to phase vortices. Our observations clearly show these beams rota…
▽ More
Conventionally, intrinsic orbital angular momentum (OAM) is associated with phase vortices. However, our investigation into the propagation dynamics of 2D superimposed catastrophe beams, termed cyclone catastrophe beams (CCBs), reveals that these beams inherently exhibit rotation and possess OAM, distinct from the typical connection to phase vortices. Our observations clearly show these beams rotating during autofocusing propagation and particle manipulation, confirming the presence of OAM. Theoretical calculations affirm that the OAM of these beams is intrinsic and can be adjusted by varying the number of superimposed beams. Furthermore, our interference and phase studies indicate that, although CCBs exhibit phase vortices, they do not rotate around the singularities of phase vortices and their total topological charges are zero. This implies that the manifestation of OAM within CCBs does not rely on nonzero topological charge of the presented phase vortices within CCBs. Especially, eigenstates decomposition analysis illustrates that CCBs can be decomposed as a composite of Laguerre-Gaussian (LG) modes with uneven fidelity, where the topological charges of LG modes align with multiples of the superimposed catastrophe beams but do not equal to the value of the OAM per photon within CCBs, emphasizing the intrinsic OAM within CCBs and the absence of a connection to phase vortices. Our findings not only advance the understanding of the relationship between OAM and phase vortices but also pave the way for different applications of OAM waves, catalyzing their development in optics and other domains.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Instant square lattice structured illumination microscopy: an optimal strategy towards photon-saving and real-time super-resolution observation
Authors:
Tianyu Zhao,
Zhaojun Wang,
Manming Shu,
**gxiang Zhang,
Yansheng Liang,
Shaowei Wang,
Ming Lei
Abstract:
Over the past decade, structured illumination microscopy (SIM) has found its niche in super-resolution (SR) microscopy due to its fast imaging speed and low excitation intensity. However, due to the significantly higher light dose compared to wide-field microscopy and the time-consuming post-processing procedures, long-term, real-time, super-resolution observation of living cells is still out of r…
▽ More
Over the past decade, structured illumination microscopy (SIM) has found its niche in super-resolution (SR) microscopy due to its fast imaging speed and low excitation intensity. However, due to the significantly higher light dose compared to wide-field microscopy and the time-consuming post-processing procedures, long-term, real-time, super-resolution observation of living cells is still out of reach for most SIM setups, which inevitably limits its routine use by cell biologists. Here, we describe square lattice SIM (SL-SIM) for long-duration live cell imaging by using the square lattice optical field as illumination, which allows continuous super-resolved observation over long periods of time. In addition, by extending the previous joint spatial-frequency reconstruction concept to SL-SIM, a high-speed reconstruction strategy is validated in the GPU environment, whose reconstruction time is even shorter than image acquisition time, thus enabling real-time observation. We have demonstrated the potential of SL-SIM on various biological applications, ranging from microtubule cytoskeleton dynamics to the interactions of mitochondrial cristae and DNAs in COS7 cells. The inherent lower light dose and user-friendly workflow of the SL-SIM could help make long-duration, real-time and super-resolved observations accessible to biological laboratories.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
Quasi-monolithic Compact Interferometric Sensor Head Design with Laser Auto-alignment
Authors:
Xiang Lin,
Peng Qiu,
Yurong Liang,
Xiaofang Ren,
Hao Yan,
Zebing Zhou
Abstract:
Interferometers play a crucial role in high-precision displacement measurement such as gravitational-wave detection. Conventional interferometer designs require accurate laser alignment, including the laser pointing and the waist position, to maintain high interference contrast during motion. Although the corner reflector returns the reflected beam in parallel, there is still a problem of lateral…
▽ More
Interferometers play a crucial role in high-precision displacement measurement such as gravitational-wave detection. Conventional interferometer designs require accurate laser alignment, including the laser pointing and the waist position, to maintain high interference contrast during motion. Although the corner reflector returns the reflected beam in parallel, there is still a problem of lateral beam shift which reduces the interference contrast. This paper presents a new compact interferometric sensor head design for measuring translations with auto-alignment. It works without laser beam alignment adjustment and maintains high interferometric contrast during arbitrary motion (tilts as well as lateral translation). Automatic alignment of the measuring beam with the reference beam is possible by means of a secondary reflection design with a corner reflector. A 20*10*10mm^3 all-glass quasi-monolithic sensor head is built based on UV adhesive bonding and tested by a piezoelectric (PZT) positioning stage. Our sensor head achieved a displacement sensitivity of 1 pm/Hz^1/2 at 1Hz with a tilt dynamic range over +/_200 mrad. This optical design can be widely used for high-precision displacement measurement over a large tilt dynamic range, such as torsion balances and seismometers.
△ Less
Submitted 2 December, 2023;
originally announced January 2024.
-
Characterization and regulation of statistical properties in Er-doped random fiber laser
Authors:
Xingyu Bao,
Shengtao Lin,
Jiaojiao Zhang,
Yongxin Liang,
Anchi Wan,
Yifei Qi,
Zinan Wang
Abstract:
Er-doped random fiber laser (ERFL) is a complex physical system, and understanding its intrinsic physical mechanisms is crucial for promoting applications. In this paper, we experimentally investigate the time-domain statistical properties of ERFL under full-bandwidth condition for the first time. We also analyze the effects of the transmission process and amplification process on the output chara…
▽ More
Er-doped random fiber laser (ERFL) is a complex physical system, and understanding its intrinsic physical mechanisms is crucial for promoting applications. In this paper, we experimentally investigate the time-domain statistical properties of ERFL under full-bandwidth condition for the first time. We also analyze the effects of the transmission process and amplification process on the output characteristics of ERFL, on the basis of which we realize its regulation. This study guides RFL systems requiring transmission and amplification, offering fresh insights for regulating the time-domain stability.
△ Less
Submitted 10 December, 2023;
originally announced December 2023.
-
High-speed image reconstruction for nonlinear structured illumination microscopy
Authors:
**gxiang Zhang,
Tianyu Zhao,
Xiangda Fu,
Manming Shu,
Jia**g Yan,
**xiao Chen,
Yansheng Liang,
Shaowei Wang,
Ming Lei
Abstract:
By exploiting the nonlinear responses of the fluorescent probes, the spatial resolution of structured illumination microscopy(SIM) can be further increased. However, due to the complex reconstruction process, the traditional reconstruction method of nonlinear structured illumination microscopy (NL-SIM) is relatively slow, which brings a great challenge to realizing real-time display of super-resol…
▽ More
By exploiting the nonlinear responses of the fluorescent probes, the spatial resolution of structured illumination microscopy(SIM) can be further increased. However, due to the complex reconstruction process, the traditional reconstruction method of nonlinear structured illumination microscopy (NL-SIM) is relatively slow, which brings a great challenge to realizing real-time display of super-resolution results. To address these issues, an accelerated NL-SIM reconstruction algorithm was developed by extending a high-speed reconstruction framework, Joint Space and Frequency Reconstruction (JSFR) to NL-SIM. We anticipate that this algorithm will facilitate NL- SIM becoming a routine tool in biomedical laboratories.
△ Less
Submitted 2 December, 2023;
originally announced December 2023.
-
Versatile non-diffracting beams generator based on free lens modulation
Authors:
Xue Yun,
Yansheng Liang,
Minru He,
Linquan Guo,
Xinyu Zhang,
Tianyu Zhao1,
Ming Lei
Abstract:
Non-diffracting beams, notable for their self-healing properties, high-localized intensity profiles over extended propagation distances, and resistance to diffraction, present significant utility across various fields. In this letter, we present a versatile and highly efficient non-diffracting beams (NDBs) generator predicated on the Fourier transformation of the focal plane field produced through…
▽ More
Non-diffracting beams, notable for their self-healing properties, high-localized intensity profiles over extended propagation distances, and resistance to diffraction, present significant utility across various fields. In this letter, we present a versatile and highly efficient non-diffracting beams (NDBs) generator predicated on the Fourier transformation of the focal plane field produced through the free lens modulation. We demonstrate the experimental generation of high-quality Bessel beams, polymorphic generalized NDBs, tilted NDBs, asymmetric NDBs, NDBs array and specially structured beams formed by the superposition of co-propagating beams. The versatile generalized NDBs generator is anticipated to find applications in laser processing, optical manipulation, and other fields.
△ Less
Submitted 12 December, 2023; v1 submitted 27 November, 2023;
originally announced November 2023.
-
Versatile manipulation of low-refractive-index particles using customized optical building blocks
Authors:
Minru He,
Yansheng Liang,
Xue Yun,
Linquan Guo,
Tianyu Zhao,
Ming Lei
Abstract:
Low-refractive-index (LRI) particles play significant roles in physics, drug delivery, biomedical science, and other fields. However, they have not attained sufficient utilization in active manipulation due to the repulsive effect of light. Here, we demonstrate the establishment of optical building blocks (OBBs) to fulfill the demands of versatile manipulation of LRI particles. The OBBs are genera…
▽ More
Low-refractive-index (LRI) particles play significant roles in physics, drug delivery, biomedical science, and other fields. However, they have not attained sufficient utilization in active manipulation due to the repulsive effect of light. Here, we demonstrate the establishment of optical building blocks (OBBs) to fulfill the demands of versatile manipulation of LRI particles. The OBBs are generated by assembling generalized perfect optical vortices based on the free lens modulation (FLM) method, by which the beams shape, intensity, and position can be elaborately designed with size independent of topological charge. Using the OBBs with high quality and high efficiency, we realized rotating LRI particles along arbitrary trajectories with controllable speed and parallel manipulation of multiple LRI particles. Importantly, we further achieved the sorting of LRI particles by size with specially structured OBBs. With unprecedented flexibility and quality, OBBs provide tremendous potential in optical trap**, lithography, and biomedicine.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
From local to nonlocal high-Q plasmonic metasurfaces
Authors:
Yao Liang,
Din ** Tsai,
Yuri Kivshar
Abstract:
The physics of bound states in the continuum (BICs) allows to design and demonstrate optical resonant structures with large values of the quality factor ($Q$-factor) by employing dielectric structures with low losses. However, BIC is a general wave phenomenon that should be observed in many systems, including the metal-dielectric structures supporting plasmons where the resonances are hindered by…
▽ More
The physics of bound states in the continuum (BICs) allows to design and demonstrate optical resonant structures with large values of the quality factor ($Q$-factor) by employing dielectric structures with low losses. However, BIC is a general wave phenomenon that should be observed in many systems, including the metal-dielectric structures supporting plasmons where the resonances are hindered by losses. Here we develop a comprehensive strategy to achieve high-$Q$ resonances in plasmonic metasurfaces by effectively tailoring the resonant modes from local and nonlocal regimes.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Thin Film Lithium Niobate Electro-optic Isolator Fabricated by photolithography assisted chemo-mechanical etching (PLACE)
Authors:
Lang Gao,
Youting Liang,
Lvbin Song,
Difeng Yin,
Jia Qi,
**ming Chen,
Zhaoxiang Liu,
Jian** Yu,
Jian Liu,
Haisu Zhang,
Zhiwei Fang,
Hongxin Qi,
Ya Cheng
Abstract:
We report a thin-film lithium niobate electro-optic isolator fabricated by photolithography-assisted chemo-mechanical etching in this work. The device demonstrates 39.50 dB isolation when subjected to a 24 GHz microwave of 25.5 dBm on its electrodes. The measured isolation remains consistently above 30 dB within the 1510 nm to 1600 nm wavelength range. The overall device insertion loss, specifical…
▽ More
We report a thin-film lithium niobate electro-optic isolator fabricated by photolithography-assisted chemo-mechanical etching in this work. The device demonstrates 39.50 dB isolation when subjected to a 24 GHz microwave of 25.5 dBm on its electrodes. The measured isolation remains consistently above 30 dB within the 1510 nm to 1600 nm wavelength range. The overall device insertion loss, specifically the fiber-to-fiber insert loss, has been measured to be 2.6 dB, which is attributed to our highly efficient spot size converter and the low propagation loss observed in the fabricated waveguides.
△ Less
Submitted 20 November, 2023;
originally announced November 2023.
-
Gigahertz-rate-switchable wavefront sha** through integration of metasurfaces with photonic integrated circuit
Authors:
Haozong Zhong,
Yong Zheng,
Jiacheng Sun,
Zhizhang Wang,
b Rongbo Wu,
Ling-en Zhang,
Youting Liang,
Qinyi Hua,
Minghao Ning,
Jitao Ji,
Bin Fang,
Lin Li,
Tao Li,
Ya Cheng,
Shining Zhu
Abstract:
Achieving spatiotemporal control of light at high-speeds presents immense possibilities for various applications in communication, computation, metrology, and sensing. The integration of subwavelength metasurfaces and optical waveguides offers a promising approach to manipulate light across multiple degrees of freedom at high-speed in compact photonic integrated circuit (PICs) devices. Here, we de…
▽ More
Achieving spatiotemporal control of light at high-speeds presents immense possibilities for various applications in communication, computation, metrology, and sensing. The integration of subwavelength metasurfaces and optical waveguides offers a promising approach to manipulate light across multiple degrees of freedom at high-speed in compact photonic integrated circuit (PICs) devices. Here, we demonstrate a gigahertz-rate-switchable wavefront sha** by integrating metasurface, lithium niobite on insulator (LNOI) photonic waveguide and electrodes within a PIC device. As proofs of concept, we showcase the generation of a focus beam with reconfigurable arbitrary polarizations, switchable focusing with lateral focal positions and focal length, orbital angular momentum light beams (OAMs) as well as Bessel beams. Our measurements indicate modulation speeds of up to gigahertz rate. This integrated platform offers a versatile and efficient means of controlling light field at high-speed within a compact system, paving the way for potential applications in optical communication, computation, sensing, and imaging.
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
Experimental demonstration of picometer level signal extraction with time-delay interferometry technique
Authors:
Mingyang Xu,
Yujie Tan,
Yurong Liang,
Jiawen Zhi,
Xiaoyang Guo,
Dan Luo,
Panpan Wang,
Hanzhong Wu,
Chenggang Shao
Abstract:
In this work, we have built an experimental setup to simulate the clock noise transmission with two spacecrafts and two optical links, and further demonstrated the extraction of picometer level signal drowned by the large laser frequency noise and clock noise with the data post-processing method. Laser frequency noise is almost eliminated by using the idea of time-delay interferometry (TDI) to con…
▽ More
In this work, we have built an experimental setup to simulate the clock noise transmission with two spacecrafts and two optical links, and further demonstrated the extraction of picometer level signal drowned by the large laser frequency noise and clock noise with the data post-processing method. Laser frequency noise is almost eliminated by using the idea of time-delay interferometry (TDI) to construct an equal arm interferometer. Clock asynchronism and clock jitter noise are significantly suppressed by laser sideband transmitting the clock noise using an electro-optic modulator (EOM). Experimental results show a reduction in laser frequency noise by approximately 10^5 and clock noise by 10^2, recovering a weak displacement signal with an average amplitude about 60 picometer and period 1 second. This work has achieved the principle verification of the noise reduction function of TDI technique to some extent, serving the data processing research of space-borne gravitational wave detection.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
Influence of EOM sideband modulation noise on space-borne gravitational wave detection
Authors:
Mingyang Xu,
Yujie Tan,
Hanzhong Wu,
Panpan Wang,
Hao Yan,
Yurong Liang,
Chenggang Shao
Abstract:
Clock noise is one of the dominant noises in the space-borne gravitational wave (GW) detection. To suppress this noise, the clock noise-calibrated time-delay-interferometry (TDI) technique is proposed. In this technique, an inter-spacecraft clock tone transfer chain is necessary to obtain the comparison information of the clock noises in two spacecraft, during which an electro-optic-modulator (EOM…
▽ More
Clock noise is one of the dominant noises in the space-borne gravitational wave (GW) detection. To suppress this noise, the clock noise-calibrated time-delay-interferometry (TDI) technique is proposed. In this technique, an inter-spacecraft clock tone transfer chain is necessary to obtain the comparison information of the clock noises in two spacecraft, during which an electro-optic-modulator (EOM) is critical and used to modulate the clock noise to the laser phase. Since the EOM sideband modulation process introduces modulation noise, it is significant to put forward the corresponding requirements and assess whether the commercial EOM meets. In this work, based on the typical Michelson TDI algorithm and the fundamental noise requirement of GW detectors, the analytic expression of the modulation noise requirement is strictly derived, which relax the component indicator need compared to the existing commonly used rough assessments. Furthermore, a commercial EOM (iXblue-NIR-10 GHz) is tested, and the experimental results show that it can meet the requirement of the typical GW detection mission LISA in whole scientific bandwidth by taking the optimal combination of the data stream. Even when the displacement measurement accuracy of LISA is improved to 1 pm/ $\mathrm{Hz^{1/2}}$ in the future, it still meets the demand.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
Ions-induced Epitaxial Growth of Perovskite Nanocomposites for Highly Efficient Light-Emitting Diodes with EQE Exceeding 30%
Authors:
Zhaohui Xing,
Qing Du,
Peiyuan Pang,
Guangrong **,
Tanghao Liu,
Yang Shen,
Dengliang Zhang,
Bufan Yu,
Yue Liang,
Jianxin Tang,
Lei Wang,
Guichuang Xing,
Jiangshan Chen,
Dongge Ma
Abstract:
Metal halide perovskites, a class of cost-effective semiconductor materials, are of great interest for modern and upcoming display technologies that prioritize the light-emitting diodes (LEDs) with high efficiency and excellent color purity. The prevailing approach to achieving efficient luminescence from pervoskites is enhancing exciton binding effect and confining carriers by reducing their dime…
▽ More
Metal halide perovskites, a class of cost-effective semiconductor materials, are of great interest for modern and upcoming display technologies that prioritize the light-emitting diodes (LEDs) with high efficiency and excellent color purity. The prevailing approach to achieving efficient luminescence from pervoskites is enhancing exciton binding effect and confining carriers by reducing their dimensionality or grain size. However, splitting pervoskite lattice into smaller ones generates abundant boundaries in solid films and results in more surface trap states, needing exact passivation to suppress trap-assisted nonradiative losses. Here, an ions-induced heteroepitaxial growth method is employed to assembe perovskite lattices with different structures into large-sized grains to produce lattice-anchored nanocomposites for efficient LEDs with high color purity. This approach enables the nanocomposite thin films, composed of three-dimensional (3D) CsPbBr3 and its variant of zero-dimensional (0D) Cs4PbBr6, to feature significant low trap-assisted nonradiative recombination, enhanced light out-coupling with a corrugated surface, and well-balanced charge carrier transport. Based on the resultant 3D/0D perovskite nanocomposites, we demonstrate the perovskite LEDs achieving an remarkable external quantum efficiency of 31.0% at the emission peak of 521 nm with a narrow full width at half-maximum of only 18 nm. This research introduces a novel approach to the development of well-assembled nanocomposites for perovskite LEDs, demonstrating high efficiency comparable to that of state-of-the-art organic LEDs.
△ Less
Submitted 2 March, 2024; v1 submitted 9 October, 2023;
originally announced October 2023.
-
Experimental Limits on Solar Reflected Dark Matter with a New Approach on Accelerated-Dark-Matter-Electron Analysis in Semiconductors
Authors:
Z. Y. Zhang,
L. T. Yang,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
S. M. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar
, et al. (59 additional authors not shown)
Abstract:
Recently a dark matter-electron (DM-electron) paradigm has drawn much attention. Models beyond the standard halo model describing DM accelerated by high energy celestial bodies are under intense examination as well. In this Letter, a velocity components analysis (VCA) method dedicated to swift analysis of accelerated DM-electron interactions via semiconductor detectors is proposed and the first HP…
▽ More
Recently a dark matter-electron (DM-electron) paradigm has drawn much attention. Models beyond the standard halo model describing DM accelerated by high energy celestial bodies are under intense examination as well. In this Letter, a velocity components analysis (VCA) method dedicated to swift analysis of accelerated DM-electron interactions via semiconductor detectors is proposed and the first HPGe detector-based accelerated DM-electron analysis is realized. Utilizing the method, the first germanium based constraint on sub-GeV solar reflected DM-electron interaction is presented with the 205.4 kg$\cdot$day dataset from the CDEX-10 experiment. In the heavy mediator scenario, our result excels in the mass range of 5$-$15 keV/$c^2$, achieving a 3 orders of magnitude improvement comparing with previous semiconductor experiments. In the light mediator scenario, the strongest laboratory constraint for DM lighter than 0.1 MeV/$c^2$ is presented. The result proves the feasibility and demonstrates the vast potential of the VCA technique in future accelerated DM-electron analyses with semiconductor detectors.
△ Less
Submitted 24 April, 2024; v1 submitted 26 September, 2023;
originally announced September 2023.
-
Deep Charge: A Deep Learning Model of Electron Density from One-Shot Density Functional Theory Calculation
Authors:
Taoyuze Lv,
Zhicheng Zhong,
Yuhang Liang,
Feng Li,
Jun Huang,
Rongkun Zheng
Abstract:
Electron charge density is a fundamental physical quantity, determining various properties of matter. In this study, we have proposed a deep-learning model for accurate charge density prediction. Our model naturally preserves physical symmetries and can be effectively trained from one-shot density functional theory calculation toward high accuracy. It captures detailed atomic environment informati…
▽ More
Electron charge density is a fundamental physical quantity, determining various properties of matter. In this study, we have proposed a deep-learning model for accurate charge density prediction. Our model naturally preserves physical symmetries and can be effectively trained from one-shot density functional theory calculation toward high accuracy. It captures detailed atomic environment information, ensuring accurate predictions of charge density across bulk, surface, molecules, and amorphous structures. This implementation exhibits excellent scalability and provides efficient analyses of material properties in large-scale condensed matter systems.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
Multiferroic Magnon Spin-Torque Based Reconfigurable Logic-In-Memory
Authors:
Yahong Chai,
Yuhan Liang,
Cancheng Xiao,
Yue Wang,
Bo Li,
Dingsong Jiang,
Pratap Pal,
Yongjian Tang,
Hetian Chen,
Yuejie Zhang,
Witold Skowroński,
Qinghua Zhang,
Lin Gu,
**g Ma,
Pu Yu,
Jianshi Tang,
Yuan-Hua Lin,
Di Yi,
Daniel C. Ralph,
Chang-Beom Eom,
Huaqiang Wu,
Tianxiang Nan
Abstract:
Magnons, bosonic quasiparticles carrying angular momentum, can flow through insulators for information transmission with minimal power dissipation. However, it remains challenging to develop a magnon-based logic due to the lack of efficient electrical manipulation of magnon transport. Here we present a magnon logic-in-memory device in a spin-source/multiferroic/ferromagnet structure, where multife…
▽ More
Magnons, bosonic quasiparticles carrying angular momentum, can flow through insulators for information transmission with minimal power dissipation. However, it remains challenging to develop a magnon-based logic due to the lack of efficient electrical manipulation of magnon transport. Here we present a magnon logic-in-memory device in a spin-source/multiferroic/ferromagnet structure, where multiferroic magnon modes can be electrically excited and controlled. In this device, magnon information is encoded to ferromagnetic bits by the magnon-mediated spin torque. We show that the ferroelectric polarization can electrically modulate the magnon spin-torque by controlling the non-collinear antiferromagnetic structure in multiferroic bismuth ferrite thin films with coupled antiferromagnetic and ferroelectric orders. By manipulating the two coupled non-volatile state variables (ferroelectric polarization and magnetization), we further demonstrate reconfigurable logic-in-memory operations in a single device. Our findings highlight the potential of multiferroics for controlling magnon information transport and offer a pathway towards room-temperature voltage-controlled, low-power, scalable magnonics for in-memory computing.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
Projected sensitivity of the CDEX-50 experiment
Authors:
X. P. Geng,
L. T. Yang,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
H. Gong,
Q. J. Guo,
T. Guo,
X. Y. Guo,
L. He,
S. M. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
L. Jiang,
S. Karmakar,
H. B. Li
, et al. (59 additional authors not shown)
Abstract:
CDEX-50 is a next-generation project of the China Dark Matter Experiment (CDEX) that aims to search for dark matter using a 50-kg germanium detector array. This paper comprises a thorough summary of the CDEX-50 experiment, including an investigation of potential background sources and the development of a background model. Based on the baseline model, the projected sensitivity of weakly interactin…
▽ More
CDEX-50 is a next-generation project of the China Dark Matter Experiment (CDEX) that aims to search for dark matter using a 50-kg germanium detector array. This paper comprises a thorough summary of the CDEX-50 experiment, including an investigation of potential background sources and the development of a background model. Based on the baseline model, the projected sensitivity of weakly interacting massive particle (WIMP) is also presented. The expected background level within the energy region of interest, set to 2--2.5 keVee, is $\sim$0.01 counts keVee$^{-1}$ kg$^{-1}$ day$^{-1}$. At 90\% confidence level, the expected sensitivity to spin-independent WIMP-nucleon couplings is estimated to reach a cross-section of 5.3 $\times$ 10$^{-45}$ cm$^{2}$ for a WIMP mass of 5 GeV/c$^{2}$ with an exposure objective of 150 kg$\cdot$year and an analysis threshold of 160 eVee. This science goal will correspond to the most sensitive results for WIMPs with a mass of 2.2--8 GeV/c$^{2}$.
△ Less
Submitted 4 September, 2023;
originally announced September 2023.
-
Robust autofocusing propagation in turbulence
Authors:
Nana Liu,
Liu Tan,
Kaijian Chen,
Peilong Hong,
Xiaoming Mo,
Bingsuo Zou,
Yi Liang
Abstract:
We conducted a comprehensive study on the robust propagation of the same spot-size Gaussian beam (SSGB), same envelope Gaussian beam (SEGB), Circular Airy beam (CAB) and Circular Pearcey beam (CPB) in complex environments. Our findings clearly demonstrate that autofocusing beams exhibit higher stability in propagation compared with the Gaussian beams. To validate our results, we statistically anal…
▽ More
We conducted a comprehensive study on the robust propagation of the same spot-size Gaussian beam (SSGB), same envelope Gaussian beam (SEGB), Circular Airy beam (CAB) and Circular Pearcey beam (CPB) in complex environments. Our findings clearly demonstrate that autofocusing beams exhibit higher stability in propagation compared with the Gaussian beams. To validate our results, we statistically analyze the intensity fluctuation of autofocusing beams and Gaussian beams. The analysis reveals that the intensity fluctuations of autofocusing beams are significantly smaller than that of Gaussian beams. Furthermore, we study the variation of the coherence factor and find that the coherence of autofocusing beams is better than that of Gaussian beams under turbulence. Additionally, we observe the change of the scintillation index (SI) with the propagation distance z, and our results show that autofocusing beams exhibit less oscillation than Gaussian beams, indicating that autofocusing beams propagate in complex environments with less distortion and fewer intensity fluctuation. Overall, our results suggest that autofocusing beams are promising for applications such as optical trap** and manipulation in complex environments. Our study provides valuable insights into the selection of stable beams that exhibit high intensity and high field gradient at the focal position in complex environments.
△ Less
Submitted 27 August, 2023;
originally announced August 2023.
-
Can spin-component scaled MP2 achieve kJ/mol accuracy for cohesive energies of molecular crystals?
Authors:
Yu Hsuan Liang,
Hong-Zhou Ye,
Timothy C. Berkelbach
Abstract:
Achieving kJ/mol accuracy in the cohesive energy of molecular crystals, as necessary for crystal structure prediction and the resolution of polymorphism, is an ongoing challenge in computational materials science. Here, we evaluate the performance of second-order Møller-Plesset perturbation theory (MP2), including its spin-component scaled models, by calculating the cohesive energies of the 23 mol…
▽ More
Achieving kJ/mol accuracy in the cohesive energy of molecular crystals, as necessary for crystal structure prediction and the resolution of polymorphism, is an ongoing challenge in computational materials science. Here, we evaluate the performance of second-order Møller-Plesset perturbation theory (MP2), including its spin-component scaled models, by calculating the cohesive energies of the 23 molecular crystals contained in the X23 dataset. Our calculations are performed with periodic boundary conditions and Brillouin zone sampling, and we converge results to the thermodynamic limit and the complete basis set limit to an accuracy of about 1 kJ/mol (0.25 kcal/mol), which is rarely achieved in previous MP2 calculations of molecular crystals. Comparing to experimental cohesive energies, we find that MP2 has a mean absolute error of 12.9 kJ/mol, which is comparable to that of DFT using the PBE functional and TS dispersion correction. Separate scaling of the opposite-spin and same-spin components of the correlation energy, with parameters previously determined for molecular interactions, reduces the mean absolute error to 9.5 kJ/mol, and reoptimizing the spin-component scaling parameters for the X23 set further reduces the mean absolute error to 7.5 kJ/mol.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Caustic analysis of partially coherent self-accelerating beams: Investigating self-healing property
Authors:
Peiyu Zhang,
Kaijian Chen,
Chuanhou Zhang,
Jiafang Liang,
Shengyu Deng,
Peilong Hong,
Bingsuo Zou,
Yi Liang
Abstract:
We employed caustic theory to analyze the propagation dynamics of partially coherent self-accelerating beams such as self-healing of partially coherent Airy beams. Our findings revealed that as the spatial coherence decreases, the self-healing ability of beams increases. This result have been demonstrated both in simulation and experiment. This is an innovative application of the caustic theory to…
▽ More
We employed caustic theory to analyze the propagation dynamics of partially coherent self-accelerating beams such as self-healing of partially coherent Airy beams. Our findings revealed that as the spatial coherence decreases, the self-healing ability of beams increases. This result have been demonstrated both in simulation and experiment. This is an innovative application of the caustic theory to the field of partially coherent structured beams, and provides a comprehensive understanding of self-healing property. Our results have significant implications for practical applications of partially coherent beams in fields such as optical communication, encryption, and imaging.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
Investigation on trap** capability of circular swallowtail beams
Authors:
Huanpeng Liang,
Kaijian Chen,
Nana Liu,
Liu Tan,
Fuxi Lu,
Shaozhou Jiang,
Yi Liang
Abstract:
Circular swallowtail beams (CSBs) with their remarkable autofocusing capability have garnered significant interests due to their potential applications in optical trap**. This study delves into a comprehensive investigation of the trap** force properties of CSBs. Through a combination of experimental observations and theoretical analysis, we systematically explore the quantitative manipulation…
▽ More
Circular swallowtail beams (CSBs) with their remarkable autofocusing capability have garnered significant interests due to their potential applications in optical trap**. This study delves into a comprehensive investigation of the trap** force properties of CSBs. Through a combination of experimental observations and theoretical analysis, we systematically explore the quantitative manipulation of trap** forces by adjusting specific parameters. This detailed investigation provides insights into the trap** force performance and stability of CSBs. Furthermore, the experimental validation of particle trap** using CSBs underscores their effectiveness, emphasizing their significant potential for optical manipulation and trap** applications.
△ Less
Submitted 2 December, 2023; v1 submitted 8 July, 2023;
originally announced July 2023.
-
Design and manipulation of high-performance photovoltaic systems based on two-dimensional novel KAgSe/KAgX(X=S,Te) van der Waals heterojunctions
Authors:
Keying Han,
Qiang Wang,
Yan Liang,
Defeng Guo,
Bin Wang
Abstract:
The realization of high-performance two-dimensional (2D) solar photovoltaic systems are both fundamentally intriguing and practically appealing to meet the fast-growing energy requirements. Since the limited application of single 2D crystals in photovoltaic, here we propose a family of 2D KAgSe/KAgX(X=S,Te) van der Waals heterostructures (vdWHs), which are constructed by combining two different KA…
▽ More
The realization of high-performance two-dimensional (2D) solar photovoltaic systems are both fundamentally intriguing and practically appealing to meet the fast-growing energy requirements. Since the limited application of single 2D crystals in photovoltaic, here we propose a family of 2D KAgSe/KAgX(X=S,Te) van der Waals heterostructures (vdWHs), which are constructed by combining two different KAgX layers through interlayer vdW interaction. After a systematic study and further regulatory research of these vdWHs based on the first-principles, numerous fascinating characteristics and physical mechanisms are obtained. Firstly, favorable potential applications of these vdWHs in photovoltaics are confirmed in virtue of their desirable optoelectronic properties, such as the robust stabilitis, moderate direct band gaps, type-II band alignments together with superior carrier mobilities, visible optical absorptions, power conversion efficiencys (PCEs) and photocurrents in their based photovoltaic devices. More importantly, when under varying vertical electric field Ez, a phase transition of band alignment from type-II to type-I of these vdWHs can be induced by the opposite band shifts between layers, which may enrich their applications in light-emitting diodes and lasers. Meanwhile, the PCE can be expanded up to 23%, and an obvious red-shift peak of the photocurrent in the visible light range are also obtained at different Ez. These fascinating tunable properties of KAgSe/KAgX vdWHs under varying Ez not only promote the improvement of their photoelectric performances, but the underlying mechanisms can also be applied to next experimental design and practical application of other 2D photovoltaic systems. Especially for the red-shift peak of the photocurrent, which is rarely found but highly desirable in practical visible photoelectric conversion.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
The nanoscale imaging of the bulk polycrystalline material with the effects of depth of field and field of view based on x-ray free electron laser
Authors:
Chuan Wang,
Yihan Liang,
Ronghao Hu,
Kai He,
Guilong Gao,
Xin Yan,
Dong Yao,
Tao Wang,
Xiaoya Li,
**shou Tian,
Wenjun Zhu,
Meng Lv,
.
Abstract:
Microscale imaging of mesoscale bulk materials under dynamic compression is important for understanding their properties. In this work, we study the effects of the depth of field (DoF) and field of view (FoV) of the optical lens and extract the scattered light of the region to be imaged within the bulk polycrystalline material based on the objective Bragg coherent diffraction imaging. We describe…
▽ More
Microscale imaging of mesoscale bulk materials under dynamic compression is important for understanding their properties. In this work, we study the effects of the depth of field (DoF) and field of view (FoV) of the optical lens and extract the scattered light of the region to be imaged within the bulk polycrystalline material based on the objective Bragg coherent diffraction imaging. We describe how the DoF and FoV quantitatively limit the diffraction volume, where the DoF and FoV limit the scattering region parallel and perpendicular to the direction of the light source respectively. We demonstrate this scheme by simulating the separate imaging of a submicron-sized crack region within a few μm-sized Si bulk material, and obtain a high imaging quality. This scheme enables imaging of selected regions within bulk polycrystalline materials with the resolution up to the order of 10 nm.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
On-chip arrayed waveguide grating fabricated on thin film lithium niobate
Authors:
Zhe Wang,
Zhiwei Fang,
Zhaoxiang Liu,
Youting Liang,
Jian Liu,
Jian** Yu,
Ting Huang,
Yuan Zhou,
Haisu Zhang,
Min Wang,
Ya Cheng
Abstract:
We design an on-chip 8-channel TFLN AWG and fabricate the device using photolithography assisted chemo-mechanical etching (PLACE) technique. We experimentally measure the transmission of the fabricated TFLN AWG near the central wavelength of 1550 nm. We obtain an on-chip loss as low as 3.32 dB, a single-channel bandwidth of 1.6 nm and a total-channel bandwidth of 12.8 nm. The crosstalk between adj…
▽ More
We design an on-chip 8-channel TFLN AWG and fabricate the device using photolithography assisted chemo-mechanical etching (PLACE) technique. We experimentally measure the transmission of the fabricated TFLN AWG near the central wavelength of 1550 nm. We obtain an on-chip loss as low as 3.32 dB, a single-channel bandwidth of 1.6 nm and a total-channel bandwidth of 12.8 nm. The crosstalk between adjacent channels was measured to be below -7.01 dB within the wavelength range from 1543 nm to 1558 nm, and the crosstalk between non-adjacent channels was below -15 dB.
△ Less
Submitted 29 May, 2023;
originally announced May 2023.
-
Searching for $^{76}$Ge neutrinoless double beta decay with the CDEX-1B experiment
Authors:
B. T. Zhang,
L. T. Yang,
Q. Yue,
K. J. Kang,
Y. J. Li,
H. P. An,
Greeshma C.,
J. P. Chang,
Y. H. Chen,
J. P. Cheng,
W. H. Dai,
Z. Deng,
C. H. Fang,
X. P. Geng,
H. Gong,
Q. J. Guo,
X. Y. Guo,
L. He,
S. M. He,
J. W. Hu,
H. X. Huang,
T. C. Huang,
H. T. Jia,
X. Jiang,
S. Karmakar
, et al. (59 additional authors not shown)
Abstract:
We operated a p-type point contact high purity germanium (PPCGe) detector (CDEX-1B, 1.008 kg) in the China **** Underground Laboratory (CJPL) for 500.3 days to search for neutrinoless double beta ($0νββ$) decay of $^{76}$Ge. A total of 504.3 kg $\cdot$ day effective exposure data was accumulated. The anti-coincidence and the multi/single-site event (MSE/SSE) discrimination methods were used to…
▽ More
We operated a p-type point contact high purity germanium (PPCGe) detector (CDEX-1B, 1.008 kg) in the China **** Underground Laboratory (CJPL) for 500.3 days to search for neutrinoless double beta ($0νββ$) decay of $^{76}$Ge. A total of 504.3 kg $\cdot$ day effective exposure data was accumulated. The anti-coincidence and the multi/single-site event (MSE/SSE) discrimination methods were used to suppress the background in the energy region of interest (ROI, $1989-2089$ keV for this work) with a factor of 23. A background level of 0.33 counts/(keV $\cdot$ kg $\cdot$ yr) was achieved. The lower limit on the half life of $^{76}$Ge $0νββ$ decay was constrained as $T_{1/2}^{0ν}\ > \ {2.2}\times 10^{23}\ \rm yr\ (90\% \ C.L.)$, corresponding to the upper limits on the effective Majorana neutrino mass: $\langle m_{ββ}\rangle < 2.3-5.2\ \mathrm{eV}$.
△ Less
Submitted 8 May, 2023; v1 submitted 1 May, 2023;
originally announced May 2023.
-
A high-efficiency proton-boron fusion scheme taking into account the effects of quantum degeneracy
Authors:
S. J. Liu,
D. Wu,
T. X. Hu,
T. Y. Liang,
X. C. Ning,
J. H. Liang,
Y. C. Liu,
P. Liu,
X. Liu,
Z. M. Sheng,
Y. T. Zhao,
D. H. H. Hoffmann,
X. T. He,
J. Zhang
Abstract:
The proton-boron (p-$^{11}$B) reaction is regarded as the holy grail of advanced fusion fuels, since the primary reaction produces three $α$ particles with few neutrons and induced radio-activities from second order reactions. Compared to the Deuterium-Tritium reaction a much higher reaction temperature is required. Moreover, bremsstrahlung energy losses due to the high nuclear charge of boron dee…
▽ More
The proton-boron (p-$^{11}$B) reaction is regarded as the holy grail of advanced fusion fuels, since the primary reaction produces three $α$ particles with few neutrons and induced radio-activities from second order reactions. Compared to the Deuterium-Tritium reaction a much higher reaction temperature is required. Moreover, bremsstrahlung energy losses due to the high nuclear charge of boron deem it seemingly apparent than a fusion reactor based on Deuterium-Tritium plasma in equilibrium is to say the least very difficult.It is becoming more appealing to collide intense laser beams or accelerated proton beams with a boron target to produce p-$^{11}$B reactions. The fusion yield of p-$^{11}$B reactions is closely related to proton beam parameters and boron target conditions such as density, temperature, and ingredients. Quantum degeneracy will increase fusion yields by reducing the stop** power of injected protons. In this work, we suggest a high-efficiency scheme for beam-target p-$^{11}$B fusions via injecting a MeV proton beam into a highly compressed quantum degenerated boron target. Such a boron target can be achieved via quasi-isentropic compression of solid boron by using precisely shaped laser pulses. Our results indicate that for densities ranging from $10^3$ to $10^4ρ_s$, where $ρ_s$ is the density of solid boron, contributions of bound and free electrons to the stop** of protons can be completely disregarded and dramatically reduced respectively. The result is an increase in fusion yield by orders of magnitude. Furthermore, in order to achieve multiplication factor $F$ greater than one, with $F$ defined as the ratio of output fusion energy to the energy of injected protons, it is found there exits a minimum possible density of boron target, which is $2.15 \times 10^4 ρ_s$ when the kinetic energy of injected protons is $0.8$ MeV.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Electro-optically programmable photonic circuits enabled by wafer-scale integration on thin-film lithium niobate
Authors:
Yong Zheng,
Haozong Zhong,
Haisu Zhang,
Rongbo Wu,
Jian Liu,
Youting Liang,
Lvbin Song,
Zhaoxiang Liu,
**ming Chen,
Junxia Zhou,
Zhiwei Fang,
Min Wang,
Ya Cheng
Abstract:
Programmable photonic circuits performing universal linear-optical transformations underpin vital functions in photonic quantum information processing, quantum-enhanced sensor networks, machine learning and many other intriguing applications. Recent advances in photonic integrated circuits facilitate monolithic integration of externally controlled Mach-Zehnder interferometers which can implement a…
▽ More
Programmable photonic circuits performing universal linear-optical transformations underpin vital functions in photonic quantum information processing, quantum-enhanced sensor networks, machine learning and many other intriguing applications. Recent advances in photonic integrated circuits facilitate monolithic integration of externally controlled Mach-Zehnder interferometers which can implement arbitrary unitary transformation on a large number of input/output modes. In this work, we demonstrate a 4x4 programmable linear photonic circuit on lithium niobate on insulator platform employing fast, power-efficient and low-loss electro-optical phase shifters, showing enormous advantages in terms of configuration rate and power consumption. Our device is capable of fast switching with 500 ps rise time and 1.7 ns fall time, and possesses a total on-chip power dissipation of only 0.015 mW when operated at 1 MHz modulation, and an insertion loss of 0.15 dB for each modulator and an on-chip extinction ratio of -34 dB for both cross and bar routes.
△ Less
Submitted 6 April, 2023;
originally announced April 2023.
-
Controllable nonlinear propagation of partially incoherent Airy beams
Authors:
Kaijian Chen,
Peiyu Zhang,
Nana Liu,
Liu Tan,
Peilong Hong,
Bingsuo Zou,
**gjun Xu,
Yi Liang
Abstract:
The self-accelerating beams such as the Airy beam show great potentials in many applications including optical manipulation, imaging and communication. However, their superior features during linear propagation could be easily corrupted by optical nonlinearity or spatial incoherence individually. Here we investigate how the interaction of spatial incoherence and nonlinear propagation affect the be…
▽ More
The self-accelerating beams such as the Airy beam show great potentials in many applications including optical manipulation, imaging and communication. However, their superior features during linear propagation could be easily corrupted by optical nonlinearity or spatial incoherence individually. Here we investigate how the interaction of spatial incoherence and nonlinear propagation affect the beam quality of Airy beam, and find that the two destroying factors can in fact balance each other. Our results show that the influence of coherence and nonlinearity on the propagation of partially incoherent Airy beams (PIABs) can be formulated as two exponential functions that have factors of opposite signs. With appropriate spatial coherence length, the PIABs not only resist the corruption of beam profile caused by self-focusing nonlinearity, but also exhibits less anomalous diffraction caused by the self-defocusing nonlinearity. Our work provides deep insight into how to maintain the beam quality of self-accelerating Airy beams by exploiting the interaction between partially incoherence and optical nonlinearity. Our results may bring about new possibilities for optimizing partially incoherent structured field and develo** related applications such as optical communication, incoherent imaging and optical manipulations.
△ Less
Submitted 26 June, 2023; v1 submitted 5 April, 2023;
originally announced April 2023.
-
The New Small Wheel electronics
Authors:
G. Iakovidis,
L. Levinson,
Y. Afik,
C. Alexa,
T. Alexopoulos,
J. Ameel,
D. Amidei,
D. Antrim,
A. Badea,
C. Bakalis,
H. Boterenbrood,
R. S. Brener,
S. Chan,
J. Chapman,
G. Chatzianastasiou,
H. Chen,
M. C. Chu,
R. M. Coliban,
T. Costa de Paiva,
G. de Geronimo,
R. Edgar,
N. Felt,
S. Francescato,
M. Franklin,
T. Geralis
, et al. (77 additional authors not shown)
Abstract:
The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector te…
▽ More
The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector technologies, the resistive strip Micromegas detectors and the "small" Thin Gap Chambers, with a total of 2.45 Million electrodes to be sensed. The two technologies require the design of a complex electronics system given that it consists of two different detector technologies and is required to provide both precision readout and a fast trigger. It will operate in a high background radiation region up to about 20 kHz/cm$^{2}$ at the expected HL-LHC luminosity of $\mathcal{L}$=7.5$\times10^{34}$cm$^{-2}$s$^{-1}$. The architecture of the system is strongly defined by the GBTx data aggregation ASIC, the newly-introduced FELIX data router and the software based data handler of the ATLAS detector. The electronics complex of this new detector was designed and developed in the last ten years and consists of multiple radiation tolerant Application Specific Integrated Circuits, multiple front-end boards, dense boards with FPGA's and purpose-built Trigger Processor boards within the ATCA standard. The New Small Wheel has been installed in 2021 and is undergoing integration within ATLAS for LHC Run 3. It should operate through the end of Run 4 (December 2032). In this manuscript, the overall design of the New Small Wheel electronics is presented.
△ Less
Submitted 25 May, 2023; v1 submitted 22 March, 2023;
originally announced March 2023.
-
Room-Temperature Bound States in the Continuum Polariton Condensation
Authors:
Xianxin Wu,
Jiepeng Song,
Shuai Zhang,
Wenna Du,
Yubin Wang,
Zhuoya Zhu,
Yin Liang,
Qing Zhang,
Qihua Xiong,
Xinfeng Liu
Abstract:
Exciton-polaritons resulting from the strong exciton-photon interaction stimulate the development of novel coherent light sources with low threshold, long range spatial, and temporal coherence to circumvent the ever increasing energy demands of optical communications. Polaritons from bound states in the continuum (BICs) are promising for Bose-Einstein condensation owing to their infinite quality f…
▽ More
Exciton-polaritons resulting from the strong exciton-photon interaction stimulate the development of novel coherent light sources with low threshold, long range spatial, and temporal coherence to circumvent the ever increasing energy demands of optical communications. Polaritons from bound states in the continuum (BICs) are promising for Bose-Einstein condensation owing to their infinite quality factors that enlarge photon lifetimes and benefit polariton accumulations. However, BIC polariton condensation remains limited to cryogenic temperatures ascribed to the small exciton binding energies of conventional material platforms. Herein, we demonstrated a room-temperature BIC polaritonic platform based on halide perovskite air-hole photonic crystals, profiting from the non-radiative BIC states and stable excitons of cesium lead bromide. BIC polariton condensation was achieved near the dispersion minimum that generates directional vortex beam emission with long-range coherence. Our work provides a significant basis for the applications of polariton condensates for integrated photonic and topological circuits.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
Measurement of the Compton scattering in germanium with a p-type point-contact germanium detector for dark matter detection
Authors:
J. W. Hu,
L. T. Yang,
Q. Yue,
X. P. Geng,
H. B. Li,
Y. F. Liang,
S. T. Lin,
S. K. Liu,
H. Ma,
L. Wang,
H. T. Wong,
B. T. Zhang
Abstract:
Low-energy background through Compton scattering from the ambient $γ$ rays can be contaminated in direct dark matter search experiments. In this paper, we report comparable measurements on low-energy spectra via Compton scattering from several $γ$-ray sources with a p-type point-contact germanium detector. The spectra between 500 eV and 18 keV have been measured and analyzed. Moreover, the feature…
▽ More
Low-energy background through Compton scattering from the ambient $γ$ rays can be contaminated in direct dark matter search experiments. In this paper, we report comparable measurements on low-energy spectra via Compton scattering from several $γ$-ray sources with a p-type point-contact germanium detector. The spectra between 500 eV and 18 keV have been measured and analyzed. Moreover, the features of the electron binding effect, particularly at the edges of the K- and L-shells in the germanium atom, were observed with different gamma sources and were consistent with the models in the Geant4 simulation. An empirical background model is proposed that provides insights into understanding the low-energy background in germanium for direct dark matter experiments.
△ Less
Submitted 14 March, 2023;
originally announced March 2023.
-
Vibration and jitter of free-flowing thin liquid sheets as target for high-repetition-rate laser-ion acceleration
Authors:
Zhengxuan Cao,
Ziyang Peng,
Yinren Shou,
Jiarui Zhao,
Shiyou Chen,
Ying Gao,
Jianbo Liu,
Pengjie Wang,
Zhusong Mei,
Zhuo Pan,
Defeng Kong,
Guijun Qi,
Shirui Xu,
Zhipeng Liu,
Yulan Liang,
Shengxuan Xu,
Tan Song,
Xun Chen,
Qingfan Wu,
Xuan Liu,
Wenjun Ma
Abstract:
Very thin free-flowing liquid sheets are promising targets for high-repetition-rate laser-ion acceleration. In this work, we report the generation of micrometer-thin free-flowing liquid sheets from the collision of two liquid jets, and study the vibration and jitter in their surface normal direction. The dependence of their motion amplitudes on the generation parameters is studied in detail. The o…
▽ More
Very thin free-flowing liquid sheets are promising targets for high-repetition-rate laser-ion acceleration. In this work, we report the generation of micrometer-thin free-flowing liquid sheets from the collision of two liquid jets, and study the vibration and jitter in their surface normal direction. The dependence of their motion amplitudes on the generation parameters is studied in detail. The origins of the vibration and jitter are discussed. Our results indicate that when the generation parameters are optimized, the motion amplitudes in the stable region can be stabilized below 3.7 μm to meet the stringent requirement of sheet position stability for a tight-focusing setup in laser-ion acceleration experiments.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Reconfigurable integrated full-dimensional optical lattice generator
Authors:
Shuang Zheng,
**g Du,
** Cao,
**run Zhang,
Zhenyu Wan,
Yize Liang,
Jian Wang
Abstract:
Optical lattices with periodic potentials have attracted great attention in modern optics and photonics, enabling extensive applications in atomic manipulation, optical trap**, optical communications, imaging, sensing, etc. In the last decade, the generation of optical lattices has been widely investigated by various approaches such as multi-plane-wave interferometer, beam superposition, spatial…
▽ More
Optical lattices with periodic potentials have attracted great attention in modern optics and photonics, enabling extensive applications in atomic manipulation, optical trap**, optical communications, imaging, sensing, etc. In the last decade, the generation of optical lattices has been widely investigated by various approaches such as multi-plane-wave interferometer, beam superposition, spatial light modulators, nanophotonic circuits, etc. However, all of the previous state-of-the-art works are restricted to only one or two dimensions of the light field, which cannot fulfill the increasing demand on complex light manipulation. Full-dimensional and dynamic control of the light field, including spatial amplitude, phase and polarization, is quite challenging and indispensable for the generation of sophisticated optical lattices. Here, we propose and demonstrate a reconfigurable integrated full-dimensional optical lattice generator, i.e. a photonic emitting array (PEA) enabling reconfigurable and full-dimensional manipulation of optical lattices, in which 4x4 photonic emitting units (PEUs) with 64 thermo-optic microheaters are densely integrated on a silicon chip. By engineering each PEU precisely with independent and complete control of optical properties of amplitude, phase and polarization, various optical vortex lattices, cylindrical vector beam lattices, and vector vortex beam lattices can be generated and reconfigured in the far field. The demonstrated integrated optical lattice generator paves the way for the miniaturization, full-dimensional control and enhanced flexibility of complex light manipulation.
△ Less
Submitted 11 February, 2023;
originally announced February 2023.
-
Ferroelectric Antiferromagnetic Quantum Anomalous Hall Insulator in TwoDimensional van der Waals Materials
Authors:
Yan Liang,
Fulu Zheng,
Thomas Frauenheim,
Pei Zhao
Abstract:
Ferroelectricity, anti-ferromagnetism (AFM) and quantum anomalous Hall effect (QAHE) are three fundamental phenomena in the field of condensed matter physics, which could enable the realization of novel devices and thus attracts great attention. Here, we show theoretical evidence that twodimensional (2D) even-layer MnBi2Te4 allows for the simultaneous presence of intercorrelated ferroelectricity,…
▽ More
Ferroelectricity, anti-ferromagnetism (AFM) and quantum anomalous Hall effect (QAHE) are three fundamental phenomena in the field of condensed matter physics, which could enable the realization of novel devices and thus attracts great attention. Here, we show theoretical evidence that twodimensional (2D) even-layer MnBi2Te4 allows for the simultaneous presence of intercorrelated ferroelectricity, AFM, and QAHE. Importantly, through rational van der Waals sliding, these exotic properties are strongly coupled. Such coupling could demonstrate many distinctive physics, for example, ferroelectric control of itinerant AFM phase and the sign of quantized anomalous Hall plateau.The explored phenomena and mechanism would not only enrich the research in 2D ferroelectricity and topological magnets, but also guide the design of low-consumption high-speed quantum devices.
△ Less
Submitted 10 February, 2023;
originally announced February 2023.