-
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
J. P. Figueiredo de sa Sousa de Almeida,
P. G. Dias de Almeida,
A. Alpana,
M. Alyari,
I. Andreev,
U. Aras,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Banerjee,
P. DeBarbaro,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (435 additional authors not shown)
Abstract:
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med…
▽ More
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.
△ Less
Submitted 27 May, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Development of the Soft X-ray AGM-AGS RIXS Beamline at Taiwan Photon Source
Authors:
A. Singh,
H. Y. Huang,
Y. Y. Chu,
C. Y. Hua,
S. W. Lin,
H. S. Fung,
H. W. Shiu,
J. Chang,
J. H. Li,
J. Okamoto,
C. C. Chiu,
C. H. Chang,
W. B. Wu,
S. Y. Perng,
S. C. Chung,
K. Y. Kao,
S. C. Yeh,
H. Y. Chao,
J. H. Chen,
D. J. Huang,
C. T. Chen
Abstract:
We report on the development of a high-resolution and highly efficient beamline for soft-X-ray resonant inelastic X-ray scattering (RIXS) located at Taiwan Photon Source. This beamline adopts an optical design that uses an active grating monochromator (AGM) and an active grating spectrometer (AGS) to implement the energy compensation principle of grating dispersion. Active gratings are utilized to…
▽ More
We report on the development of a high-resolution and highly efficient beamline for soft-X-ray resonant inelastic X-ray scattering (RIXS) located at Taiwan Photon Source. This beamline adopts an optical design that uses an active grating monochromator (AGM) and an active grating spectrometer (AGS) to implement the energy compensation principle of grating dispersion. Active gratings are utilized to diminish defocus, coma and higher-order aberrations as well as to decrease the slope errors caused by thermal deformation and optical polishing. The AGS is mounted on a rotatable granite platform to enable momentum-resolved RIXS measurements with scattering angle over a wide range. Several high-precision instruments developed in house for this beamline are briefly described. The best energy resolution obtained from this AGM-AGS beamline was 12.4 meV at 530 eV, achieving a resolving power 42,000, while the bandwidth of the incident soft X-rays was kept at 0.5 eV. To demonstrate the scientific impacts of high-resolution RIXS, we present an example of momentum-resolved RIXS measurements on a high-temperature superconducting cuprate, La$_{2-x}$Sr$_x$CuO$_4$. The measurements reveal the A$_{1g}$ apical oxygen phonons in superconducting cuprates, opening a new opportunity to investigate the coupling between these phonons and charge density waves.
△ Less
Submitted 24 June, 2020; v1 submitted 23 June, 2020;
originally announced June 2020.
-
Stress Tensor Eigenvector Following with Next-Generation Quantum Theory of Atoms in Molecules
Authors:
Jia Hui Li,
Wei Jie Huang,
Tianlv Xu,
Steven R. Kirk,
Samantha Jenkins
Abstract:
The eigenvectors of the electronic stress tensor have been identified as useful for the prediction of chemical reactivity because they determine the most preferred directions to move the bonds that correspond to a qualitative change in the molecular electronic structure. A new 3-D vector based interpretation of the chemical bond that we refer to as the bond-path framework set…
▽ More
The eigenvectors of the electronic stress tensor have been identified as useful for the prediction of chemical reactivity because they determine the most preferred directions to move the bonds that correspond to a qualitative change in the molecular electronic structure. A new 3-D vector based interpretation of the chemical bond that we refer to as the bond-path framework set $\mathbb{B} = \{p,q,r\}$ provides a version of the quantum theory of atoms in molecules (QTAIM) beyond the minimum definition for bonding that is particularly suitable for understanding changes in molecular electronic structure that occur during reactions. The bond-path framework set $\mathbb{B}$ is straightforwardly constructed and visualized from the eigenvalues and eigenvectors of QTAIM. This approach is applied to the structural deformations of ethene that occur during applied torsion $θ$, -180.0° $\leq$ $θ$ $\leq$ +180.0°. The corresponding stress tensor version is readily constructed as $\mathbb{B}_σ = \{p_σ,q_σ,r\}$ within the QTAIM partitioning making it possible to compare experimentally and computationally determined electronic charge densities. The bond-path framework set $\mathbb{B}$ or $\mathbb{B}_σ$ are the networks that comprise three strands: the least preferred ($p, p_σ$), most preferred ($q, q_σ$) and $r$ is the familiar QTAIM bond-path. We demonstrate that the most preferred direction for bond motion using the stress tensor corresponds to the most compressible direction and not to the least compressible direction as previously reported. We show the necessity for a directional approach constructed using the eigenvectors along the entire bond length and demonstrate the insufficiency of the sole use of scalar measures for capturing the nature of the stress tensor within the QTAIM partitioning.
△ Less
Submitted 16 September, 2018;
originally announced September 2018.
-
Modulation Instabilities in Birefringent Two-Core Optical Fibers
Authors:
J. H. Li,
K. S. Chiang,
B. A. Malomed,
K. W. Chow
Abstract:
Previous studies of the modulation instability (MI) of continuous waves (CWs) in a two-core fiber (TCF) did not consider effects caused by co-propagation of the two polarized modes in a TCF that possesses birefringence, such as cross-phase modulation (XPM), polarization-mode dispersion (PMD), and polarization-dependent coupling (PDC) between the cores. This paper reports an analysis of these effec…
▽ More
Previous studies of the modulation instability (MI) of continuous waves (CWs) in a two-core fiber (TCF) did not consider effects caused by co-propagation of the two polarized modes in a TCF that possesses birefringence, such as cross-phase modulation (XPM), polarization-mode dispersion (PMD), and polarization-dependent coupling (PDC) between the cores. This paper reports an analysis of these effects on the MI by considering a linear-birefringence TCF and a circular-birefringence TCF, which feature different XPM coefficients. The analysis focuses on the MI of the asymmetric CW states in the TCFs, which have no counterparts in single-core fibers. We find that, the asymmetric CW state exists when its total power exceeds a threshold (minimum) value, which is sensitive to the value of the XPM coefficient. We consider, in particular, a class of asymmetric CW states that admit analytical solutions. In the anomalous dispersion regime, without taking the PMD and PDC into account, the MI gain spectra of the birefringent TCF, if scaled by the threshold power, are almost identical to those of the zero-birefringence TCF. However, in the normal dispersion regime, the power-scaled MI gain spectra of the birefringent TCFs are distinctly different from their zero-birefringence counterparts, and the difference is particularly significant for the circular-birefringence TCF, which takes a larger XPM coefficient. On the other hand, the PMD and PDC only exert weak effects on the MI gain spectra. We also simulate the nonlinear evolution of the MI of the CW inputs in the TCFs and obtain a good agreement with the analytical solutions.
△ Less
Submitted 1 July, 2012;
originally announced July 2012.