-
GBT20, a 20.48 Gbps PAM4 Optical Transmitter Module for Particle Physics Experiments
Authors:
B. Deng,
L. Zhang,
C. -P. Chao,
S. -W. Chen,
E. Cruda,
D. Gong,
S. Hou,
G. Huang,
X. Huang,
C. -Y. Li,
C. Liu,
T. Liu,
E. R. Liu,
Q. Sun,
X. Sun,
G. Wong,
J. Ye
Abstract:
We present a pluggable radiation-tolerant 4-level Pulse-Amplitude-Modulation (PAM4) optical transmitter module called GBT20 (Giga-Bit Transmitter at 20 Gbps) for particle-physics experiments. GBT20 has an OSFP or firefly connector to input 16-bit data each at 1.28 Gbps. The GBT20 drives a VCSEL die with an LC lens or a VCSEL TOSA and interfaces an optical fiber with a standard LC connector. The mi…
▽ More
We present a pluggable radiation-tolerant 4-level Pulse-Amplitude-Modulation (PAM4) optical transmitter module called GBT20 (Giga-Bit Transmitter at 20 Gbps) for particle-physics experiments. GBT20 has an OSFP or firefly connector to input 16-bit data each at 1.28 Gbps. The GBT20 drives a VCSEL die with an LC lens or a VCSEL TOSA and interfaces an optical fiber with a standard LC connector. The minimum module, including the host connector, occupies 41 mm x 13 mm x 6 mm. At 20.48 Gbps, the minimum Transmitter Dispersion Eye Closure Quaternary (TDECQ) is around 0.7 dB. The power consumption is around 164 mW in the low-power mode. The SEE cross-section is below 7.5x10^(-14) cm^2. No significant performance degrades after a TID of 5.4 kGy.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
A 40 Gbps Optical Transceiver for Particle Physics Experiments
Authors:
B. Deng,
X. Huang,
H. Sun,
C. -P. Chao,
S. -W. Chen,
D. Gong,
S. Hou,
G. Huang,
C. -Y. Li,
C. Liu,
T. Liu,
Q. Sun,
J. Ye,
L. Zhang,
W. Zhang
Abstract:
We present the design and the test results of a quad-channel optical transceiver module (QTRx) possibly for future particle physics experiments. The transmitters of QTRx, each at 10 Gbps, are based on a Quad-channel VCSEL Diode array Driver (QLDD) and 1 x 4 VCSEL array. The receivers of QTRx, with data rates of 2.56 Gbps or 10 Gbps per channel, are based on a Quad-channel Trans-Impedance and limit…
▽ More
We present the design and the test results of a quad-channel optical transceiver module (QTRx) possibly for future particle physics experiments. The transmitters of QTRx, each at 10 Gbps, are based on a Quad-channel VCSEL Diode array Driver (QLDD) and 1 x 4 VCSEL array. The receivers of QTRx, with data rates of 2.56 Gbps or 10 Gbps per channel, are based on a Quad-channel Trans-Impedance and limiting Amplifier (QTIA) and 1 x 4 photodiode array of GaAs or InGaAs. QTRx is 20 mm x 10 mm x 5 mm and couples to an MT fiber connector. Test results indicate that QTRx achieves the design goals with a power consumption of 124 mW per transmitter channel at 10 Gbps and 120 mW at 2.56 Gbps for the receiver channel with an on-chip charge pump. The sensitivities of QTIA are -17 dBm at 2.56 Gbps and -8 dBm at 10 Gbps, respectively. Further improvements with a gold-finger interface and a more compact optical lens are being designed.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
Insensitivity of a turbulent laser-plasma dynamo to initial conditions
Authors:
A. F. A. Bott,
L. Chen,
P. Tzeferacos,
C. A. J. Palmer,
A. R. Bell,
R. Bingham,
A. Birkel,
D. H. Froula,
J. Katz,
M. W. Kunz,
C. -K. Li,
H-S. Park,
R. Petrasso,
J. S. Ross,
B. Reville,
D. Ryu,
F. H. Séguin,
T. G. White,
A. A. Schekochihin,
D. Q. Lamb,
G. Gregori
Abstract:
It has recently been demonstrated experimentally that a turbulent plasma created by the collision of two inhomogeneous, asymmetric, weakly magnetised laser-produced plasma jets can generate strong stochastic magnetic fields via the small-scale turbulent dynamo mechanism, provided the magnetic Reynolds number of the plasma is sufficiently large. In this paper, we compare such a plasma with one aris…
▽ More
It has recently been demonstrated experimentally that a turbulent plasma created by the collision of two inhomogeneous, asymmetric, weakly magnetised laser-produced plasma jets can generate strong stochastic magnetic fields via the small-scale turbulent dynamo mechanism, provided the magnetic Reynolds number of the plasma is sufficiently large. In this paper, we compare such a plasma with one arising from two pre-magnetised plasma jets whose creation is identical save for the addition of a strong external magnetic field imposed by a pulsed magnetic field generator (`MIFEDS'). We investigate the differences between the two turbulent systems using a Thomson-scattering diagnostic, X-ray self-emission imaging and proton radiography. The Thomson-scattering spectra and X-ray images suggest that the presence of the external magnetic field has a limited effect on the plasma dynamics in the experiment. While the presence of the external magnetic field induces collimation of the flows in the colliding plasma jets and the initial strengths of the magnetic fields arising from the interaction between the colliding jets are significantly larger as a result of the external field, the energy and morphology of the stochastic magnetic fields post-amplification are indistinguishable. We conclude that, for turbulent laser-plasmas with super-critical magnetic Reynolds numbers, the dynamo-amplified magnetic fields are determined by the turbulent dynamics rather than the seed fields and modest changes in the initial flow dynamics of the plasma, a finding consistent with theoretical expectations and simulations of turbulent dynamos.
△ Less
Submitted 5 January, 2022;
originally announced January 2022.
-
QTIA, a 2.5 or 10 Gbps 4-Channel Array Optical Receiver ASIC in a 65 nm CMOS Technology
Authors:
H. Sun,
X. Huang,
C. -P. Chao,
S. -W. Chen,
B. Deng,
D. Gong,
S. Hou,
G. Huang,
S. Kulis,
C. -Y. Li,
C. Liu,
T. Liu,
P. Moreira,
Q. Sun,
J. Ye,
L. Zhang,
W. Zhang
Abstract:
The Quad transimpedance and limiting amplifier (QTIA) is a 4-channel array optical receiver ASIC, developed using a 65 nm CMOS process. It is configurable between the bit rate of 2.56 Gbps and 10 Gbps per channel. QTIA offers careful matching to both GaAs and InGaAs photodiodes. At this R&D stage, each channel has a different biasing scheme to the photodiode for optimal coupling. A charge pump is…
▽ More
The Quad transimpedance and limiting amplifier (QTIA) is a 4-channel array optical receiver ASIC, developed using a 65 nm CMOS process. It is configurable between the bit rate of 2.56 Gbps and 10 Gbps per channel. QTIA offers careful matching to both GaAs and InGaAs photodiodes. At this R&D stage, each channel has a different biasing scheme to the photodiode for optimal coupling. A charge pump is implemented in one channel to provide a higher reverse bias voltage, which is especially important to mitigate radiation effects on the photodiodes. The circuit functions of QTIA successfully passed the lab tests with GaAs photodiodes.
△ Less
Submitted 11 February, 2022; v1 submitted 24 October, 2021;
originally announced October 2021.
-
Strong suppression of heat conduction in a laboratory replica of galaxy-cluster turbulent plasmas
Authors:
J. Meinecke,
P. Tzeferacos,
J. S. Ross,
A. F. A. Bott,
S. Feister,
H. -S. Park,
A. R. Bell,
R. Blandford,
R. L. Berger,
R. Bingham,
A. Casner,
L. E. Chen,
J. Foster,
D. H. Froula,
C. Goyon,
D. Kalantar,
M. Koenig,
B. Lahmann,
C. -K. Li,
Y. Lu,
C. A. J. Palmer,
R. Petrasso,
H. Poole,
B. Remington,
B. Reville
, et al. (10 additional authors not shown)
Abstract:
Galaxy clusters are filled with hot, diffuse X-ray emitting plasma, with a stochastically tangled magnetic field whose energy is close to equipartition with the energy of the turbulent motions \cite{zweibel1997, Vacca}. In the cluster cores, the temperatures remain anomalously high compared to what might be expected considering that the radiative cooling time is short relative to the Hubble time \…
▽ More
Galaxy clusters are filled with hot, diffuse X-ray emitting plasma, with a stochastically tangled magnetic field whose energy is close to equipartition with the energy of the turbulent motions \cite{zweibel1997, Vacca}. In the cluster cores, the temperatures remain anomalously high compared to what might be expected considering that the radiative cooling time is short relative to the Hubble time \cite{cowie1977,fabian1994}. While feedback from the central active galactic nuclei (AGN) \cite{fabian2012,birzan2012,churazov2000} is believed to provide most of the heating, there has been a long debate as to whether conduction of heat from the bulk to the core can help the core to reach the observed temperatures \cite{narayan2001,ruszkowski2002,kunz2011}, given the presence of tangled magnetic fields. Interestingly, evidence of very sharp temperature gradients in structures like cold fronts implies a high degree of suppression of thermal conduction \cite{markevitch2007}. To address the problem of thermal conduction in a magnetized and turbulent plasma, we have created a replica of such a system in a laser laboratory experiment. Our data show a reduction of local heat transport by two orders of magnitude or more, leading to strong temperature variations on small spatial scales, as is seen in cluster plasmas \cite{markevitch2003}.
△ Less
Submitted 18 May, 2021;
originally announced May 2021.
-
Lithium-cesium slow beam from a two-dimensional magneto-optical trap
Authors:
Y. -D. Chen,
W. -X. Li,
M. -E. Chou,
C. -H. Kuo,
C. -S. Li,
S. Tung
Abstract:
We present the creation of a lithium-cesium slow beam using a two-dimensional magneto-optical trap. The two-species atomic beam is directed to load a three-dimensional magneto-optical trap in ultrahigh vacuum. We achieve a loading rate of 1.3$\times$10$^{7}$ lithium atoms/s with the lithium oven temperature at 370~$^{\circ}$C and 2.2$\times$10$^{7}$ cesium atoms/s with the Cs oven temperature at 2…
▽ More
We present the creation of a lithium-cesium slow beam using a two-dimensional magneto-optical trap. The two-species atomic beam is directed to load a three-dimensional magneto-optical trap in ultrahigh vacuum. We achieve a loading rate of 1.3$\times$10$^{7}$ lithium atoms/s with the lithium oven temperature at 370~$^{\circ}$C and 2.2$\times$10$^{7}$ cesium atoms/s with the Cs oven temperature at 20~$^{\circ}$C. The maximum numbers of lithium and cesium atoms in the trap are 1.0$\times$10$^{9}$ and 1.4$\times$10$^{8}$, respectively. Our results show that the simple and compact two-dimensional magneto-optical trap is suitable for producing an atomic beam of two species that have a large mass ratio and very different volatilities.
△ Less
Submitted 23 February, 2021; v1 submitted 1 December, 2020;
originally announced December 2020.
-
Prototy** of a 25 Gbps optical transmitter for applications in high-energy physics experiments
Authors:
C. -P. Chao,
S. -W. Chen,
D. Gong,
S. Hou,
X. Huang,
C. -Y. Li,
C. Liu,
T. Liu,
M. Qi,
J. Ye,
X. Zhao,
L. Zhang,
W. Zhou
Abstract:
Development of optical links with 850 nm multi-mode vertical-cavity surface-emitting lasers (VCSELs) has advanced to 25 Gbps in speed. For applications in high-energy experiments, the transceivers are required to be tolerant in radiation and particle fields. We report on prototy** of a miniature transmitter named MTx+, which is developed for high speed transmission with the dual-channel laser dr…
▽ More
Development of optical links with 850 nm multi-mode vertical-cavity surface-emitting lasers (VCSELs) has advanced to 25 Gbps in speed. For applications in high-energy experiments, the transceivers are required to be tolerant in radiation and particle fields. We report on prototy** of a miniature transmitter named MTx+, which is developed for high speed transmission with the dual-channel laser driver LOCld65 and 850 nm VCSELs packaged in TOSA format. The LOCld65 is fabricated in the TSMC 65 nm process and is packaged in the QFN-40 for assembly. The MTx+ modules and test kits were first made with PCB and components qualified for 10 Gbps applications, and were tested for achieving 14 Gbps. The data transfer rate of the MTx+ module is investigated further for the speed of up to 25 Gbps. The LOCld65 is examined with post-layout simulation and the module design upgraded with components including the TOSA qualified for 25 Gbps applications. The PCB material is replaced by the Panasonic MEGTRON6. The revised MTx+ is tested at 25 Gbps and the eye-diagram shows a mask margin of 22 %.
△ Less
Submitted 21 June, 2020;
originally announced June 2020.
-
Design and Performance of an Interferometric Trigger Array for Radio Detection of High-Energy Neutrinos
Authors:
P. Allison,
S. Archambault,
R. Bard,
J. J. Beatty,
M. Beheler-Amass,
D. Z. Besson,
M. Beydler,
M. Bogdan,
C. -C. Chen,
C. -H. Chen,
P. Chen,
B. A. Clark,
A. Clough,
A. Connolly,
L. Cremonesi,
J. Davies,
C. Deaconu,
M. A. DuVernois,
E. Friedman,
J. Hanson,
K. Hanson,
J. Haugen,
K. D. Hoffman,
B. Hokanson-Fasig,
E. Hong
, et al. (47 additional authors not shown)
Abstract:
Ultra-high energy neutrinos are detectable through impulsive radio signals generated through interactions in dense media, such as ice. Subsurface in-ice radio arrays are a promising way to advance the observation and measurement of astrophysical high-energy neutrinos with energies above those discovered by the IceCube detector ($\geq$1 PeV) as well as cosmogenic neutrinos created in the GZK proces…
▽ More
Ultra-high energy neutrinos are detectable through impulsive radio signals generated through interactions in dense media, such as ice. Subsurface in-ice radio arrays are a promising way to advance the observation and measurement of astrophysical high-energy neutrinos with energies above those discovered by the IceCube detector ($\geq$1 PeV) as well as cosmogenic neutrinos created in the GZK process ($\geq$100 PeV). Here we describe the $\textit{NuPhase}$ detector, which is a compact receiving array of low-gain antennas deployed 185 m deep in glacial ice near the South Pole. Signals from the antennas are digitized and coherently summed into multiple beams to form a low-threshold interferometric phased array trigger for radio impulses. The NuPhase detector was installed at an Askaryan Radio Array (ARA) station during the 2017/18 Austral summer season. $\textit{In situ}$ measurements with an impulsive, point-source calibration instrument show a 50% trigger efficiency on impulses with voltage signal-to-noise ratios (SNR) of $\le$2.0, a factor of $\sim$1.8 improvement in SNR over the standard ARA combinatoric trigger. Hardware-level simulations, validated with $\textit{in situ}$ measurements, predict a trigger threshold of an SNR as low as 1.6 for neutrino interactions that are in the far field of the array. With the already-achieved NuPhase trigger performance included in ARASim, a detector simulation for the ARA experiment, we find the trigger-level effective detector volume is increased by a factor of 1.8 at neutrino energies between 10 and 100 PeV compared to the currently used ARA combinatoric trigger. We also discuss an achievable near term path toward lowering the trigger threshold further to an SNR of 1.0, which would increase the effective single-station volume by more than a factor of 3 in the same range of neutrino energies.
△ Less
Submitted 21 October, 2018; v1 submitted 12 September, 2018;
originally announced September 2018.
-
Laboratory evidence of dynamo amplification of magnetic fields in a turbulent plasma
Authors:
P. Tzeferacos,
A. Rigby,
A. Bott,
A. R. Bell,
R. Bingham,
A. Casner,
F. Cattaneo,
E. M. Churazov,
J. Emig,
F. Fiuza,
C. B. Forest,
J. Foster,
C. Graziani,
J. Katz,
M. Koenig,
C. -K. Li,
J. Meinecke,
R. Petrasso,
H. -S. Park,
B. A. Remington,
J. S. Ross,
D. Ryu,
D. Ryutov,
T. G. White,
B. Reville
, et al. (5 additional authors not shown)
Abstract:
Magnetic fields are ubiquitous in the Universe. Extragalactic disks, halos and clusters have consistently been shown, via diffuse radio-synchrotron emission and Faraday rotation measurements, to exhibit magnetic field strengths ranging from a few nG to tens of $μ$G. The energy density of these fields is typically comparable to the energy density of the fluid motions of the plasma in which they are…
▽ More
Magnetic fields are ubiquitous in the Universe. Extragalactic disks, halos and clusters have consistently been shown, via diffuse radio-synchrotron emission and Faraday rotation measurements, to exhibit magnetic field strengths ranging from a few nG to tens of $μ$G. The energy density of these fields is typically comparable to the energy density of the fluid motions of the plasma in which they are embedded, making magnetic fields essential players in the dynamics of the luminous matter. The standard theoretical model for the origin of these strong magnetic fields is through the amplification of tiny seed fields via turbulent dynamo to the level consistent with current observations. Here we demonstrate, using laser-produced colliding plasma flows, that turbulence is indeed capable of rapidly amplifying seed fields to near equipartition with the turbulent fluid motions. These results support the notion that turbulent dynamo is a viable mechanism responsible for the observed present-day magnetization of the Universe.
△ Less
Submitted 9 February, 2017;
originally announced February 2017.
-
Numerical modeling of laser-driven experiments aiming to demonstrate magnetic field amplification via turbulent dynamo
Authors:
P. Tzeferacos,
A. Rigby,
A. Bott,
A. R. Bell,
R. Bingham,
A. Casner,
F. Cattaneo,
E. M. Churazov,
J. Emig,
N. Flocke,
F. Fiuza,
C. B. Forest,
J. Foster,
C. Graziani,
J. Katz,
M. Koenig,
C. -K. Li,
J. Meinecke,
R. Petrasso,
H. -S. Park,
B. A. Remington,
J. S. Ross,
D. Ryu,
D. Ryutov,
K. Weide
, et al. (7 additional authors not shown)
Abstract:
The universe is permeated by magnetic fields, with strengths ranging from a femtogauss in the voids between the filaments of galaxy clusters to several teragauss in black holes and neutron stars. The standard model behind cosmological magnetic fields is the nonlinear amplification of seed fields via turbulent dynamo to the values observed. We have conceived experiments that aim to demonstrate and…
▽ More
The universe is permeated by magnetic fields, with strengths ranging from a femtogauss in the voids between the filaments of galaxy clusters to several teragauss in black holes and neutron stars. The standard model behind cosmological magnetic fields is the nonlinear amplification of seed fields via turbulent dynamo to the values observed. We have conceived experiments that aim to demonstrate and study the turbulent dynamo mechanism in the laboratory. Here we describe the design of these experiments through simulation campaigns using FLASH, a highly capable radiation magnetohydrodynamics code that we have developed, and large-scale three-dimensional simulations on the Mira supercomputer at Argonne National Laboratory. The simulation results indicate that the experimental platform may be capable of reaching a turbulent plasma state and study dynamo amplification. We validate and compare our numerical results with a small subset of experimental data using synthetic diagnostics.
△ Less
Submitted 9 February, 2017;
originally announced February 2017.
-
\emph{In-situ} determination of astro-comb calibrator lines to better than 10 cm s$^{-1}$
Authors:
C. -H. Li,
A. Glenday,
A. J. Benedick,
G. Chang,
L. -J. Chen,
C. Cramer,
P. Fendel,
G. Furesz,
F. Kärtner,
S. Korzennik,
D. Phillips,
D. Sasselov,
A. Szentgyorgyi,
R. Walsworth
Abstract:
Improved wavelength calibrators for high-resolution astrophysical spectrographs will be essential for precision radial velocity (RV) detection of Earth-like exoplanets and direct observation of cosmological deceleration. The astro-comb is a combination of an octave-spanning femtosecond laser frequency comb and a Fabry-Pérot cavity used to achieve calibrator line spacings that can be resolved by an…
▽ More
Improved wavelength calibrators for high-resolution astrophysical spectrographs will be essential for precision radial velocity (RV) detection of Earth-like exoplanets and direct observation of cosmological deceleration. The astro-comb is a combination of an octave-spanning femtosecond laser frequency comb and a Fabry-Pérot cavity used to achieve calibrator line spacings that can be resolved by an astrophysical spectrograph. Systematic spectral shifts associated with the cavity can be 0.1-1 MHz, corresponding to RV errors of 10-100 cm/s, due to the dispersive properties of the cavity mirrors over broad spectral widths. Although these systematic shifts are very stable, their correction is crucial to high accuracy astrophysical spectroscopy. Here, we demonstrate an \emph{in-situ} technique to determine the systematic shifts of astro-comb lines due to finite Fabry-Pérot cavity dispersion. The technique is practical for implementation at a telescope-based spectrograph to enable wavelength calibration accuracy better than 10 cm/s.
△ Less
Submitted 2 June, 2010;
originally announced June 2010.
-
Posture-Dependent Human 3He Lung Imaging in an Open Access MRI System: Initial Results
Authors:
L. L. Tsai,
R. W. Mair,
C. -H. Li,
M. S. Rosen,
S. Patz,
R. L. Walsworth
Abstract:
The human lung and its functions are extremely sensitive to orientation and posture, and debate continues as to the role of gravity and the surrounding anatomy in determining lung function and heterogeneity of perfusion and ventilation. However, study of these effects is difficult. The conventional high-field magnets used for most hyperpolarized 3He MRI of the human lung, and most other common r…
▽ More
The human lung and its functions are extremely sensitive to orientation and posture, and debate continues as to the role of gravity and the surrounding anatomy in determining lung function and heterogeneity of perfusion and ventilation. However, study of these effects is difficult. The conventional high-field magnets used for most hyperpolarized 3He MRI of the human lung, and most other common radiological imaging modalities including PET and CT, restrict subjects to lying horizontally, minimizing most gravitational effects. In this paper, we briefly review the motivation for posture-dependent studies of human lung function, and present initial imaging results of human lungs in the supine and vertical body orientations using inhaled hyperpolarized 3He gas and an open-access MRI instrument. The open geometry of this MRI system features a "walk-in" capability that permits subjects to be imaged in vertical and horizontal positions, and potentially allows for complete rotation of the orientation of the imaging subject in a two-dimensional plane. Initial results include two-dimensional lung images acquired with ~ 4 mm in-plane resolution and three-dimensional images with ~ 1.5 cm slice thickness. Effects of posture variation are observed.
△ Less
Submitted 23 July, 2007;
originally announced July 2007.
-
Polarization dependent photoionization cross-sections and radiative lifetimes of atomic states in Ba
Authors:
C. -H. Li,
D. Budker
Abstract:
The photoionization cross-sections of two even-parity excited states, $5d6d ^3D_1$ and $6s7d ^3D_{2}$, of atomic Ba at the ionization-laser wavelength of 556.6 nm were measured. We found that the total cross-section depends on the relative polarization of the atoms and the ionization-laser light. With density-matrix algebra, we show that, in general, there are at most three parameters in the pho…
▽ More
The photoionization cross-sections of two even-parity excited states, $5d6d ^3D_1$ and $6s7d ^3D_{2}$, of atomic Ba at the ionization-laser wavelength of 556.6 nm were measured. We found that the total cross-section depends on the relative polarization of the atoms and the ionization-laser light. With density-matrix algebra, we show that, in general, there are at most three parameters in the photoionization cross-section. Some of these parameters are determined in this work. We also present the measurement of the radiative lifetime of five even-parity excited states of barium.
△ Less
Submitted 1 May, 2006; v1 submitted 27 February, 2006;
originally announced February 2006.
-
Erratum: Light-induced desorption of alkali-metal atoms from paraffin coating [Phys. Rev. A 66, 042903 (2002)]
Authors:
E. B. Alexandrov,
M. V. Balabas,
D. Budker,
D. English,
D. F. Kimball,
C. -H. Li,
V. V. Yashchuk
Abstract:
Erratum for paper "Light-induced desorption of alkali-metal atoms from paraffin coating" [Phys. Rev. A 66, 042903 (2002).
Erratum for paper "Light-induced desorption of alkali-metal atoms from paraffin coating" [Phys. Rev. A 66, 042903 (2002).
△ Less
Submitted 29 June, 2004;
originally announced June 2004.
