Showing 1–9 of 9 results for author: Levitan, J

Challenges and Lessons Learned from fabrication, testing and analysis of eight MQXFA Low Beta Quadrupole magnets for HL-LHC

Authors: G. Ambrosio, K. Amm, M. Anerella, G. Apollinari, G. Arnau Izquierdo, M. Baldini, A. Ballarino, C. Barth, A. Ben Yahia, J. Blowers, P. Borges De Sousa, R. Bossert, B. Bulat, R. Carcagno, D. W. Cheng, G. Chlachidze, L. Cooley, M. Crouvizier, A. Devred, J. DiMarco, S. Feher, P. Ferracin, J. Ferradas Troitino, L. Garcia Fajardo, S. Gourlay , et al. (33 additional authors not shown)

Abstract: By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low beta quadrupole magnets to be used in the Q1 and Q3 Inner Triplet elements of the High Luminosity LHC. This AUP effort is shared by BNL, Fermilab, and LBNL, with strand verification tests at NHMFL. An important step of th… ▽ More By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low beta quadrupole magnets to be used in the Q1 and Q3 Inner Triplet elements of the High Luminosity LHC. This AUP effort is shared by BNL, Fermilab, and LBNL, with strand verification tests at NHMFL. An important step of the AUP QA plan is the testing of MQXFA magnets in a vertical cryostat at BNL. The acceptance criteria that could be tested at BNL were all met by the first four production magnets (MQXFA03-MQXFA06). Subsequently, two magnets (MQXFA07 and MQXFA08) did not meet some criteria and were disassembled. Lessons learned during the disassembly of MQXFA07 caused a revision to the assembly specifications that were used for MQXFA10 and subsequent magnets. In this paper, we present a summary of: 1) the fabrication and test data of all the MQXFA magnets; 2) the analysis of MQXFA07/A08 test results with characterization of the limiting mechanism; 3) the outcome of the investigation, including the lessons learned during MQXFA07 disassembly; and 4) the finite element analysis correlating observations with test performance. △ Less

Submitted 23 January, 2023; originally announced January 2023.

Report number: FERMILAB-PUB-22-855-TD

Contact resistivity due to oxide layers between two REBCO tapes

Authors: Jun Lu, Yan Xin, Eric Lochner, Kyle Radcliff, Jeremy Levitan

Abstract: In a no-insulation (NI) REBCO magnet, the turn-to-turn contact resistivity (Rc) determines its quench self-protection capability, charging delay time and the energy loss during field ramps. Therefore it is critically important to be able to control a range of Rc values suitable for various NI magnet coils. We used a commercial oxidizing agent Ebonol C to treat the copper surface of REBCO tapes. Th… ▽ More In a no-insulation (NI) REBCO magnet, the turn-to-turn contact resistivity (Rc) determines its quench self-protection capability, charging delay time and the energy loss during field ramps. Therefore it is critically important to be able to control a range of Rc values suitable for various NI magnet coils. We used a commercial oxidizing agent Ebonol C to treat the copper surface of REBCO tapes. The copper oxide layer was characterized by cross-sectional transmission electron microscopy (TEM) and x-ray photoelectron spectroscopy (XPS). The oxide layer formed in Ebonol C at 98 °C for 1 min is Cu2O of about 0.5 um. The Rc between two oxidized REBCO is in the order of 35 mOhm-cm2 at 4.2 K which decreases slowly with contact pressure cycles. The Rc increases but only slightly at 77 K. We also investigated the effect of oxidation of stainless steel co-wind tape on Rc. The native oxides on 316 stainless steel tape as well as those heated in air at 200 - 600 °C were examined by TEM and XPS. The native oxides layer is about 3 nm thick. After heating at 300 °C for 8 min and 600 °C for 1 min, its thickness increases to about 10 and 30 nm respectively. For the stainless steel tapes with about 10 nm surface oxides, pressure cycling for 30,000 cycles decreases Rc by almost 4 orders of magnitude. Whereas at 77 K, it only changes slightly. For a surface with 30 nm oxide, the Rc decreases moderately with load cycles. The results suggest that for an oxidized stainless steel to achieve stable Rc over large number of load cycles a relatively thick oxide film is needed. △ Less

Submitted 3 December, 2019; originally announced December 2019.

Comments: 10 figures

Canonical Transformation of Potential Model Hamiltonian Mechanics to Geometrical Form I

Authors: Y. Strauss, L. P. Horwitz, A. Yahalom, J. Levitan

Abstract: Using the methods of symplectic geometry, we establish the existence of a canonical transformation from potential model Hamiltonians of standard form in a Euclidean space to an equivalent geometrical form on a manifold, where the corresponding motions are along geodesic curves. The advantage of this representation is that it admits the computation of geometric deviation as a test for local stabili… ▽ More Using the methods of symplectic geometry, we establish the existence of a canonical transformation from potential model Hamiltonians of standard form in a Euclidean space to an equivalent geometrical form on a manifold, where the corresponding motions are along geodesic curves. The advantage of this representation is that it admits the computation of geometric deviation as a test for local stability, shown in previous studies to be a very effective criterion for the stability of the orbits generated by the potential model Hamiltonian. We describe here an algorithm for finding the generating function for the canonical transformation and describe some of the properties of this map** under local diffeomorphisms. We give a convergence proof for this algorithm for the one-dimensional case, and provide a precise geometric formulation of geodesic deviation which relates the stability of the motion in the geometric form to that of the Hamiltonian standard form. We discuss the relation of bounded domains in the two representations for which Morse theory would be applicable. Numerical computations for some interesting examples will be presented in forthcoming papers. △ Less

Submitted 3 August, 2017; v1 submitted 2 August, 2017; originally announced August 2017.

Comments: 20 pages. Additional correction

An Underlying Geometrical Manifold for Hamiltonian Mechanics

Authors: L. P. Horwitz, A. Yahalom, J. Levitan, M. Lewkowicz

Abstract: We show that there exists an underlying manifold with a conformal metric and compatible connection form, and a metric type Hamiltonian (which we call the geometrical picture) that can be put into correspondence with the usual Hamilton-Lagrange mechanics. The requirement of dynamical equivalence of the two types of Hamiltonians, that the momenta generated by the two pictures be equal for all times,… ▽ More We show that there exists an underlying manifold with a conformal metric and compatible connection form, and a metric type Hamiltonian (which we call the geometrical picture) that can be put into correspondence with the usual Hamilton-Lagrange mechanics. The requirement of dynamical equivalence of the two types of Hamiltonians, that the momenta generated by the two pictures be equal for all times, is sufficient to determine an expansion of the conformal factor, defined on the geometrical coordinate representation, in its domain of analyticity with coefficients to all orders determined by functions of the potential of the Hamilton-Lagrange picture, defined on the Hamilton-Lagrange coordinate representation, and its derivatives. Conversely, if the conformal function is known, the potential of a Hamilton-Lagrange picture can be determined in a similar way. We show that arbitrary local variations of the orbits in the Hamilton-Lagrange picture can be generated by variations along geodesics in the geometrical picture and establish a correspondence which provides a basis for understanding how the instability in the geometrical picture is manifested in the instability of the original Hamiltonian motion. △ Less

Submitted 25 July, 2016; v1 submitted 30 November, 2015; originally announced November 2015.

Comments: 17 pages, titles of references given, keywords added

MSC Class: 34C40; 34C28; 37N05

Lyapunov vs. Geometrical Stability Analysis of the Kepler and the Restricted Three Body Problem

Authors: A. Yahalom, J. Levitan, M. Lewkowicz, L. Horwitz

Abstract: In this letter we show that although the application of standard Lyapunov analysis predicts that completely integrable Kepler motion is unstable, the geometrical analysis of Horwitz et al [1] predicts the observed stability. This seems to us to provide evidence for both the incompleteness of the standard Lyapunov analysis and the strength of the geometrical analysis. Moreover, we apply this approa… ▽ More In this letter we show that although the application of standard Lyapunov analysis predicts that completely integrable Kepler motion is unstable, the geometrical analysis of Horwitz et al [1] predicts the observed stability. This seems to us to provide evidence for both the incompleteness of the standard Lyapunov analysis and the strength of the geometrical analysis. Moreover, we apply this approach to the three body problem in which the third body is restricted to move on a circle of large radius which induces an adiabatic time dependent potential on the second body. This causes the second body to move in a very interesting and intricate but periodic trajectory; however, the standard Lyapunov analysis, as well as methods based on the parametric variation of curvature associated with the Jacobi metric, incorrectly predict chaotic behavior. The geometric approach predicts the correct stable motion in this case as well. △ Less

Submitted 20 October, 2010; v1 submitted 7 August, 2009; originally announced August 2009.

Comments: 9 pages, 14 figures

On the geometry of Hamiltonian chaos

Authors: Lawrence Horwitz, Jacob Levitan, Meir Lewkowicz, Marcelo Schiffer, Yossi Ben Zion

Abstract: We show that Gutzwiller's characterization of chaotic Hamiltonian systems in terms of the curvature associated with a Riemannian metric tensor in the structure of the Hamiltonian can be extended to a wide class of potential models of standard form through definition of a conformal metric. The geodesic equations reproduce the Hamilton equations of the original potential model when a transition is… ▽ More We show that Gutzwiller's characterization of chaotic Hamiltonian systems in terms of the curvature associated with a Riemannian metric tensor in the structure of the Hamiltonian can be extended to a wide class of potential models of standard form through definition of a conformal metric. The geodesic equations reproduce the Hamilton equations of the original potential model when a transition is made to the dual manifold, and the geodesics in the dual space coincide with the orbits of the Hamiltonian potential model. We therefore find a direct geometrical description of the time development of a Hamiltonian potential model. The second covariant derivative of the geodesic deviation in this dual manifold generates a dynamical curvature, resulting in (energy dependent) criteria for unstable behavior different from the usual Lyapunov criteria. We discuss some examples of unstable Hamiltonian systems in two dimensions giving, in particular, detailed results for a potential obtained from a fifth order expansion of a Toda lattice Hamiltonian. △ Less

Submitted 17 April, 2007; v1 submitted 18 January, 2007; originally announced January 2007.

Comments: 7 pages TeX, Figure captions, 4 figures (eps). Some clarifications, added references

Report number: TAUP 2837/06

Journal ref: Phys.Rev.Lett.98:234301,2007

Scale Specific and Scale Independent Measures of Heart Rate Variability as Risk Indicators

Authors: Y. Ashkenazy, M. Lewkowicz, J. Levitan, S. Havlin, K. Saermark, H. Moelgaard, P. E. Bloch Thomsen, M. Moller, U. Hintze, H. V. Huikuri

Abstract: We study the Heart Rate Variability (HRV) using scale specific variance and scaling exponents as measures of healthy and cardiac impaired individuals. Our results show that the variance and the scaling exponent are uncorrelated. We find that the variance measure at certain scales is well suited to separate healthy subjects from heart patients. However, for cumulative survival probability the sca… ▽ More We study the Heart Rate Variability (HRV) using scale specific variance and scaling exponents as measures of healthy and cardiac impaired individuals. Our results show that the variance and the scaling exponent are uncorrelated. We find that the variance measure at certain scales is well suited to separate healthy subjects from heart patients. However, for cumulative survival probability the scaling exponents outperform the variance measure. Our risk study is based on a database containing recordings from 428 individuals after myocardial infarct (MI) and on database containing 105 healthy subjects and 11 heart patients. The results have been obtained by applying three recently developed methods (DFA - Detrended Fluctuation Analysis, WAV - Multiresolution Wavelet Analysis, and DTS - Detrended Time Series analysis) which are shown to be highly correlated. △ Less

Submitted 22 November, 2000; v1 submitted 17 September, 1999; originally announced September 1999.

Comments: 7 pages, 4 figures, euro-tex

Discrimination between Healthy and Sick Cardiac Autonomic Nervous System by Detrended Heart Rate Variability Analysis

Authors: Y. Ashkenazy, M. Lewkowicz, J. Levitan, S. Havlin, K. Saermark, H. Moelgaard, P. E. Bloch Thomsen

Abstract: Multiresolution Wavelet Transform and Detrended Fluctuation Analysis have been recently proven as excellent methods in the analysis of Heart Rate Variability, and in distinguishing between healthy subjects and patients with various dysfunctions of the cardiac nervous system. We argue that it is possible to obtain a distinction between healthy subjects/patients of at least similar quality by, fir… ▽ More Multiresolution Wavelet Transform and Detrended Fluctuation Analysis have been recently proven as excellent methods in the analysis of Heart Rate Variability, and in distinguishing between healthy subjects and patients with various dysfunctions of the cardiac nervous system. We argue that it is possible to obtain a distinction between healthy subjects/patients of at least similar quality by, first, detrending the time-series of RR-intervals by subtracting a running average based on a local window with a length of around 32 data points, and then, calculating the standard deviation of the detrended time-series. The results presented here indicate that the analysis can be based on very short time-series of RR-data (7-8 minutes), which is a considerable improvement relative to 24-hours Holter recordings. △ Less

Submitted 13 October, 1998; v1 submitted 1 October, 1998; originally announced October 1998.

Comments: 5 revtex pages including 6 figures. Accepted in Fractals

Discrimination of the Healthy and Sick Cardiac Autonomic Nervous System by a New Wavelet Analysis of Heartbeat Intervals

Authors: Y. Ashkenazy, M. Lewkowicz, J. Levitan, H. Moelgaard, P. E. Bloch Thomsen, K. Saermark

Abstract: We demonstrate that it is possible to distinguish with a complete certainty between healthy subjects and patients with various dysfunctions of the cardiac nervous system by way of multiresolutional wavelet transform of RR intervals. We repeated the study of Thurner et al on different ensemble of subjects. We show that reconstructed series using a filter which discards wavelet coefficients relate… ▽ More We demonstrate that it is possible to distinguish with a complete certainty between healthy subjects and patients with various dysfunctions of the cardiac nervous system by way of multiresolutional wavelet transform of RR intervals. We repeated the study of Thurner et al on different ensemble of subjects. We show that reconstructed series using a filter which discards wavelet coefficients related with higher scales enables one to classify individuals for which the method otherwise is inconclusive. We suggest a delimiting diagnostic value of the standard deviation of the filtered, reconstructed RR interval time series in the range of $\sim 0.035$ (for the above mentioned filter), below which individuals are at risk. △ Less

Submitted 10 May, 1998; v1 submitted 24 April, 1998; originally announced April 1998.

Comments: 5 latex pages (including 6 figures). Accepted in Fractals

Journal ref: Fractals, Vol. 6 No. 3 (1998) 197-203