-
Numerical Modeling of Transient Absorption in Hybrid Dual-Plasmonic Au/CuS Nanostructures
Authors:
Atefeh Habibpourmoghadam,
Wenyong Xie,
Patrick Bessel,
André Niebur,
Artsiom Antanovich,
Dirk Dorfs,
Jannika Lauth,
Antonio Calà Lesina
Abstract:
Transient absorption in plasmonic materials has recently attracted attention of the chemistry and optics communities as a technique to understand dynamic processes and hot carriers generation on ultrafast timescales. In this context, hybrid Au/CuS nanostructures were recently investigated via ultrafast pump-probe transient absorption spectroscopy revealing an exotic dual-plasmonic behavior. Namely…
▽ More
Transient absorption in plasmonic materials has recently attracted attention of the chemistry and optics communities as a technique to understand dynamic processes and hot carriers generation on ultrafast timescales. In this context, hybrid Au/CuS nanostructures were recently investigated via ultrafast pump-probe transient absorption spectroscopy revealing an exotic dual-plasmonic behavior. Namely, the excitation of a localized surface plasmon resonance (LSPR) in Au (pump at 551 nm) or CuS (pump at 1051 nm), leads to a transient response in the counterpart. This phenomenon was attributed to Landau dam**, which stems from hot carrier generation and injection mechanisms at the interface between the two materials. Here, we employ numerical modeling to further clarify the origin of such response in hybrid Au/CuS nanostructures. The geometry of the hybrid nanostructures is first investigated via steady-state simulations (only probe), confirming an UFO-shaped configuration. We provide clarification on the role of the size ratio between Au and CuS. Finally, we present the simulation of transient absorption in the pump-probe regime, which qualitatively replicates our experimental observations, thus identifying the plasmonic response modified via Landau dam** as the main governing mechanism. Our numerical approach provides an important tool for the modeling of transient absorption spectroscopy and can support experimental research on dual-plasmonic materials for applications in spectroscopy, photocatalysis, thermoplasmonics, sensing, and energy harvesting.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Reconfigurable collective resonances induced by liquid crystals in dielectric metasurfaces
Authors:
Atefeh Habibpourmoghadam,
Andrey Evlyukhin,
Antonio Calà Lesina
Abstract:
Dielectric metasurfaces can show multi-resonant response with high Q-factors in the visible range due to multipole coupling. This work suggests that these collective resonances in all-dielectric metasurfaces can be modified if adjacent to an anisotropic liquid crystal medium, opening a new path toward the dynamic metasurface effects. Using numerical full-wave simulations and the multipole decompos…
▽ More
Dielectric metasurfaces can show multi-resonant response with high Q-factors in the visible range due to multipole coupling. This work suggests that these collective resonances in all-dielectric metasurfaces can be modified if adjacent to an anisotropic liquid crystal medium, opening a new path toward the dynamic metasurface effects. Using numerical full-wave simulations and the multipole decomposition technique for reflection and transmission coefficients we study the influence of the surrounding anisotropic medium on the resonant response of metasurfaces composed of disk-shaped dielectric nanoparticles. First, we consider tuning and switching the resonances induced by the polarization of the incident beam in metasurfaces placed in a medium with different orientations of LC molecules. Secondly, we study the case when the tuning of resonances is carried out by applying an external voltage that changes the orientation of LC molecules and thereby changes the refractive index of the surrounding medium. The results obtained demonstrate the possibility of directly tuning the resonant response of dielectric metasurfaces in an anisotropic environment, which is important for the development of optical nanodevices with dynamic switching of functional modes in the visible range.
△ Less
Submitted 26 May, 2024; v1 submitted 27 April, 2024;
originally announced April 2024.
-
Free-form inverse design of arbitrary dispersive materials in nanophotonics
Authors:
Johannes Gedeon,
Emadeldeen Hassan,
Antonio Calà Lesina
Abstract:
In the last decades nanostructures have unlocked myriads of functionalities in nanophotonics by engineering light-matter interaction beyond what is possible with conventional bulk optics. The space of parameters available for design is practically unlimited due to the large variety of optical materials and geometries that can be realized by nanofabrication techniques. Thus, computational approache…
▽ More
In the last decades nanostructures have unlocked myriads of functionalities in nanophotonics by engineering light-matter interaction beyond what is possible with conventional bulk optics. The space of parameters available for design is practically unlimited due to the large variety of optical materials and geometries that can be realized by nanofabrication techniques. Thus, computational approaches are necessary to efficiently search for optimal solutions. In this paper, we enable the free-form inverse design in 3D of linear optical materials with arbitrary dispersion and anisotropy. This is achieved by implementing the adjoint method based on the complex-conjugate pole-residue pair model within a parallel finite-difference time-domain solver, suitable for high-performance computing systems. Our method is tested on the canonical nanophotonic problem of field enhancement in a gap region. The obtained free-form designs of metallic and dielectric materials satisfy the fundamental curiosity of how optimized nanostructures look like in 3D. Unconventional free-form designs revealed by our method, although may be challenging or unfeasible with current technology, bring new insight into how light interacts with nanostructures, and could provide new ideas to inspire forward design.
△ Less
Submitted 29 April, 2023;
originally announced May 2023.
-
Dynamic dielectric metasurfaces via control of surface lattice resonances in non-homogeneous environment
Authors:
Izzatjon Allayarov,
Andrey B. Evlyukhin,
Diane J. Roth,
Boris Chichkov,
Anatoly V. Zayats,
Antonio Calà Lesina
Abstract:
Dynamic control of metamaterials and metasurfaces is crucial for many photonic technologies, such as flat lenses, displays, augmented reality devices, and beam steering, to name a few. The dynamic response is typically achieved by controlling the phase and/or amplitude of individual meta-atom resonances using electro-optic, phase-change or nonlinear effects. Here, we propose and demonstrate a new…
▽ More
Dynamic control of metamaterials and metasurfaces is crucial for many photonic technologies, such as flat lenses, displays, augmented reality devices, and beam steering, to name a few. The dynamic response is typically achieved by controlling the phase and/or amplitude of individual meta-atom resonances using electro-optic, phase-change or nonlinear effects. Here, we propose and demonstrate a new practical strategy for the dynamic control of the resonant interaction of light with dielectric metasurfaces, exploiting the dependence of the interaction between meta-atoms in the array on the inhomogeneity of the surrounding medium. The revealed tuning mechanisms are based on the concept of the surface lattice resonance (SLR), the development of which strongly depends on the difference between permittivities of superstrate and substrate materials. We experimentally demonstrate surface lattice resonances in dielectric (Si) metasurfaces, and reveal two tuning mechanisms corresponding to shifting or dam** of the SLR in optofluidic environment. The demonstrated dynamic tuning effect with the observed vivid colour changes may provide a dynamic metasurface approach with high spectral selectivity and enhanced sensitivity for sensors, as well as high-resolution for small pixel size displays.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Anapole plasmonic meta-atom enabled by inverse design for metamaterials transparency
Authors:
Emadeldeen Hassan,
Andrey B. Evlyukhin,
Antonio Calà Lesina
Abstract:
Anapole states are broadly investigated in nanophotonics for their ability to provide field enhancement and transparency. While low extinction has been achieved in dielectric nanoparticles due to the absence of intrinsic losses, in the case of plasmonic nanostructures this is still lacking. Here, we report an easy-to-fabricate planar plasmonic nanostructure found via topology optimization, which e…
▽ More
Anapole states are broadly investigated in nanophotonics for their ability to provide field enhancement and transparency. While low extinction has been achieved in dielectric nanoparticles due to the absence of intrinsic losses, in the case of plasmonic nanostructures this is still lacking. Here, we report an easy-to-fabricate planar plasmonic nanostructure found via topology optimization, which exhibits an anapole state with close-to-ideal characteristics in the visible regime including weak absorption, high near-field enhancment, and strong suppression of scattering. The nanonantenna can act as an individual meta-atom because, due to low inter-coupling, it preserves its optical response even when used in highly packed metasurfaces and metamaterials. The low losses are due to the optimized topology which provides concentration of the field outside the structure with minimum penetration inside the metal. Compared to anapole states in dielectric structures, the accessibility of the volume of enhanced field is suitable for sensing applications. Anapole states are typically interpreted as the result of the interference between electric and toroidal dipole moments. Here and based on a novel approach, in the context of secondary multipole analysis, we introduce the concept of anapole state without using the contribution of toroidal dipole moments. The article provides new insight into anapoles in plasmonic nanostructures and ways to achieve them, while remarking the power of topology optimization to unlock designs with novel functionalities.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Topology optimization of dispersive plasmonic nanostructures in the time-domain
Authors:
Emadeldeen Hassan,
Antonio Calà Lesina
Abstract:
Topology optimization techniques have been applied in integrated optics and nanophotonics for the inverse design of devices with shapes that cannot be conceived by human intuition. At optical frequencies, these techniques have only been utilized to optimize nondispersive materials using frequency-domain methods. However, a time-domain formulation is more efficient to optimize materials with disper…
▽ More
Topology optimization techniques have been applied in integrated optics and nanophotonics for the inverse design of devices with shapes that cannot be conceived by human intuition. At optical frequencies, these techniques have only been utilized to optimize nondispersive materials using frequency-domain methods. However, a time-domain formulation is more efficient to optimize materials with dispersion. We introduce such a formulation for the Drude model, which is widely used to simulate the dispersive properties of metals, conductive oxides, and conductive polymers. Our topology optimization algorithm is based on the finite-difference time-domain (FDTD) method, and we introduce a time-domain sensitivity analysis that enables the evaluation of the gradient information by using one additional FDTD simulation. The existence of dielectric and metallic structures in the design space produces plasmonic field enhancement that causes convergence issues. We employ an artificial dam** approach during the optimization iterations that, by reducing the plasmonic effects, solves the convergence problem. We present several design examples of 2D and 3D plasmonic nanoantennas with optimized field localization and enhancement in frequency bands of choice. Our method has the potential to speed up the design of wideband optical nanostructures made of dispersive materials for applications in nanoplasmonics, integrated optics, ultrafast photonics, and nonlinear optics.
△ Less
Submitted 2 March, 2022;
originally announced March 2022.
-
Understanding the nonlinear optical response of epsilon near zero materials in the time-domain
Authors:
Joshua Baxter,
Adriana Pérez-Casanova,
Luis Cortes-Herrera,
Antonio Calà Lesina,
Israel De Leon,
Lora Ramunno
Abstract:
The promise of active nanophotonics technology relies on the confinement and control of light at the nanoscale. Confinement via plasmonics, dielectric resonators, and waveguides can be complemented with materials whose optical properties can be controlled using nonlinear effects. Transparent conducting oxides (TCOs) exhibit strong optical nonlinearities in their near zero permittivity spectral reg…
▽ More
The promise of active nanophotonics technology relies on the confinement and control of light at the nanoscale. Confinement via plasmonics, dielectric resonators, and waveguides can be complemented with materials whose optical properties can be controlled using nonlinear effects. Transparent conducting oxides (TCOs) exhibit strong optical nonlinearities in their near zero permittivity spectral region, on the femtosecond time-scale. Harnessing full control over the nonlinear response requires a deeper understanding of the process. To achieve this, we develop a self-consistent time-domain model for the nonlinear optical response of TCOs and implement it into a three-dimensional finite-difference time-domain code. We compare and tune our simulation tools against recently published experimental results for intense laser irradiation of thin indium tin oxide (ITO) films. Finally, by simulating intense laser irradiation of ITO-based plasmonic metasurfaces, we demonstrate the full power of our approach. As expected, we find validating the significant enhancement of the nonlinear response of an ITO-based metasurface over bare ITO thin films. Our work thus enables quantitative nanophotonics design with epsilon-near-zero materials.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
On the performance of optical phased array technology for beam steering
Authors:
Antonio Cala' Lesina,
Dominic Goodwill,
Eric Bernier,
Lora Ramunno,
Pierre Berini
Abstract:
Optical phased arrays are of strong interest for beam steering in telecom and LIDAR applications. A phased array ideally requires that the field produced by each element in the array (a pixel) is fully controllable in phase and amplitude (ideally constant). This is needed to realize a phase gradient along a direction in the array, and thus beam steering in that direction. In practice, grating lobe…
▽ More
Optical phased arrays are of strong interest for beam steering in telecom and LIDAR applications. A phased array ideally requires that the field produced by each element in the array (a pixel) is fully controllable in phase and amplitude (ideally constant). This is needed to realize a phase gradient along a direction in the array, and thus beam steering in that direction. In practice, grating lobes appear if the pixel size is not sub-wavelength, which is an issue for many optical technologies. Furthermore, the phase performance of an optical pixel may not span the required $2π$ phase range, or may not produce a constant amplitude over its phase range. These limitations result in imperfections in the phase gradient, which in turn introduce undesirable secondary lobes. We discuss the effects of non-ideal pixels on beam formation, in a general and technology-agnostic manner. By examining the strength of secondary lobes with respect to the main lobe, we quantify beam steering quality, and make recommendations on the pixel performance required for beam steering within prescribed specifications. By applying appropriate compensation strategies, we show that it is possible to realize high-quality beam steering even when the pixel performance is non-ideal, with intensity of the secondary lobes be two orders of magnitude smaller than the main lobe.
△ Less
Submitted 20 July, 2020;
originally announced July 2020.
-
Hyperpolarizability of plasmonic meta-atoms in metasurfaces
Authors:
M. Saad Bin-Alam,
Joshua Baxter,
Kashif M. Awan,
Antti Kiviniemi,
Yaryna Mamchur,
Antonio Cala' Lesina,
Kosmas L. Tsakmakidis,
Mikko J. Huttunen,
Lora Ramunno,
Ksenia Dolgaleva
Abstract:
Plasmonic metasurfaces are promising as enablers of nanoscale nonlinear optics and flat nonlinear optical components. Nonlinear optical responses of such metasurfaces are determined by the nonlinear optical properties of individual nanostructured plasmonic meta-atoms, which are the building blocks of the metasurfaces. Unfortunately, no simple methods exist to determine the nonlinear coefficients (…
▽ More
Plasmonic metasurfaces are promising as enablers of nanoscale nonlinear optics and flat nonlinear optical components. Nonlinear optical responses of such metasurfaces are determined by the nonlinear optical properties of individual nanostructured plasmonic meta-atoms, which are the building blocks of the metasurfaces. Unfortunately, no simple methods exist to determine the nonlinear coefficients (hyperpolarizabilities) of the meta-atoms hindering designing of nonlinear metasurfaces. Here, we develop the equivalent RLC circuit model of such meta-atoms to estimate their second-order nonlinear optical parameter i.e. the first-order hyperpolarizability in the optical spectral range. In parallel, we extract from second-harmonic generation experiments the spectrum of the 1st-order hyperpolarizabilities of individual meta-atoms consisting of asymmetrically shaped (elongated) plasmonic nanoprisms. Moreover, we verify our results using nonlinear hydrodynamic-FDTD and with calculations based on nonlinear scattering theory. All three approaches: analytical, experimental, and computational, yield results that agree very well. Our empirical RLC model can thus be used as a simple tool to enable efficient design of nonlinear plasmonic metasurfaces.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Parallel FDTD modelling of nonlocality in plasmonics
Authors:
Joshua Baxter,
Antonino Calà Lesina,
Lora Ramunno
Abstract:
As nanofabrication techniques become more precise, with ever smaller feature sizes, the ability to model nonlocal effects in plasmonics becomes increasingly important. While nonlocal models based on hydrodynamics have been implemented using various computational electromagnetics techniques, the finite-difference time-domain (FDTD) version has remained elusive. Here we present a comprehensive FDTD…
▽ More
As nanofabrication techniques become more precise, with ever smaller feature sizes, the ability to model nonlocal effects in plasmonics becomes increasingly important. While nonlocal models based on hydrodynamics have been implemented using various computational electromagnetics techniques, the finite-difference time-domain (FDTD) version has remained elusive. Here we present a comprehensive FDTD implementation of nonlocal hydrodynamics, including for parallel computing. As a sub-nanometer step size is required to resolve nonlocal effects, a parallel implementation makes the computational cost of nonlocal FDTD more affordable. We first validate our algorithms for small spherical metallic particles, and find that nonlocality smears out staircasing artifacts at metal surfaces, increasing the accuracy over local models. We find this also for a larger nanostructure with sharp extrusions. The large size of this simulation, where nonlocal effects are clearly present, highlights the importance and impact of a parallel implementation in FDTD.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
Optical phased arrays for LIDAR: beam steering via tunable plasmonic metasurfaces
Authors:
Antonino Calà Lesina,
Dominic Goodwill,
Eric Bernier,
Lora Ramunno,
Pierre Berini
Abstract:
Controlling the phase and amplitude of light emitted by the elements (i.e., pixels) of an optical phased array is of paramount importance to realizing dynamic beam steering for LIDAR applications. In this paper, we propose a plasmonic pixel composed of a metallic nanoantenna covered by a thin oxide layer, and a conductive oxide, e.g., ITO, for use in a reflectarray metasurface. By considering volt…
▽ More
Controlling the phase and amplitude of light emitted by the elements (i.e., pixels) of an optical phased array is of paramount importance to realizing dynamic beam steering for LIDAR applications. In this paper, we propose a plasmonic pixel composed of a metallic nanoantenna covered by a thin oxide layer, and a conductive oxide, e.g., ITO, for use in a reflectarray metasurface. By considering voltage biasing of the nanoantenna via metallic connectors, and exploiting the carrier refraction effect in the metal-oxide-semiconductor capacitor in the accumulation and depletion regions, our simulations predict control of the reflection coefficient phase over a range $>330^{\circ}$ with a nearly constant magnitude. We discuss the physical mechanism underlying the optical response, the effect of the connectors, and propose strategies to maximize the magnitude of the reflection coefficient and to achieve dual-band operation. The suitability of our plasmonic pixel design for beam steering in LIDAR is demonstrated via 3D-FDTD simulations.
△ Less
Submitted 4 December, 2019;
originally announced December 2019.
-
Plasmonic colours predicted by deep learning
Authors:
Joshua Baxter,
Antonino Calà Lesina,
Jean-Michel Guay,
Arnaud Weck,
Pierre Berini,
Lora Ramunno
Abstract:
Picosecond laser pulses have been used as a surface colouring technique for noble metals, where the colours result from plasmonic resonances in the metallic nanoparticles created and redeposited on the surface by ablation and deposition processes. This technology provides two datasets which we use to train artificial neural networks, data from the experiment itself (laser parameters vs. colours) a…
▽ More
Picosecond laser pulses have been used as a surface colouring technique for noble metals, where the colours result from plasmonic resonances in the metallic nanoparticles created and redeposited on the surface by ablation and deposition processes. This technology provides two datasets which we use to train artificial neural networks, data from the experiment itself (laser parameters vs. colours) and data from the corresponding numerical simulations (geometric parameters vs. colours). We apply deep learning to predict the colour in both cases. We also propose a method for the solution of the inverse problem -- wherein the geometric parameters and the laser parameters are predicted from colour -- using an iterative multivariable inverse design method.
△ Less
Submitted 15 February, 2019;
originally announced February 2019.
-
Origin of third harmonic generation in plasmonic nanoantennas
Authors:
Antonino Calà Lesina,
Pierre Berini,
Lora Ramunno
Abstract:
Plasmonic nanoantennas have been recently proposed to boost nonlinear optical processes. In a metal dipole nanoantenna with a dielectric nanoparticle placed in the gap, the linear field enhancement can be exploited to enhance third harmonic emission. Since both metals and dielectrics exhibit nonlinearity, the nonlinear far-field contains contributions from each, and the impossibility of measuring…
▽ More
Plasmonic nanoantennas have been recently proposed to boost nonlinear optical processes. In a metal dipole nanoantenna with a dielectric nanoparticle placed in the gap, the linear field enhancement can be exploited to enhance third harmonic emission. Since both metals and dielectrics exhibit nonlinearity, the nonlinear far-field contains contributions from each, and the impossibility of measuring these contributions separately has led to seemingly contradictory interpretations about the origin of the nonlinear emission. We determine that the origin of the third harmonic from metal-dielectric dipole nanoantennas depends on nanoantenna design, and in particular, the width. We find that the emission from gold dominates in thin threadlike nanoantennas, whereas the emission from the gap material dominates in wider nanoantennas. We also find that monopole nanoantennas perform better than dipoles having the same width, and due to their simplicity should be preferred in many applications.
△ Less
Submitted 25 October, 2016;
originally announced October 2016.
-
Chiral Huygens metasurfaces for nonlinear structuring of linearly polarized light
Authors:
A. Calà Lesina,
P. Berini,
L. Ramunno
Abstract:
We report on a chiral nanostructure, which we term a "butterfly nanoantenna," that, when used in a metasurface, allows the direct conversion of a linearly polarized beam into a nonlinear optical far-field of arbitrary complexity. The butterfly nanoantenna exhibits field enhancement in its gap for every incident linear polarization, which can be exploited to drive nonlinear optical emitters within…
▽ More
We report on a chiral nanostructure, which we term a "butterfly nanoantenna," that, when used in a metasurface, allows the direct conversion of a linearly polarized beam into a nonlinear optical far-field of arbitrary complexity. The butterfly nanoantenna exhibits field enhancement in its gap for every incident linear polarization, which can be exploited to drive nonlinear optical emitters within the gap, for the structuring of light within a frequency range not accessible by linear plasmonics. As the polarization, phase and amplitude of the field in the gap are highly controlled, nonlinear emitters within the gap behave as an idealized Huygens source. A general framework is thereby proposed wherein the butterfly nanoantennas can be arranged on a surface to produce a highly structured far-field nonlinear optical beam with high purity. A third harmonic Laguerre-Gauss beam carrying an optical orbital angular momentum of 41 is demonstrated as an example, through large-scale simulations on a high-performance computing platform of the full plasmonic metasurface with an area large enough to contain up to 3600 nanoantennas.
△ Less
Submitted 23 September, 2016;
originally announced September 2016.
-
Enhanced plasmonic coloring of silver and formation of large laser-induced periodic surface structures using multi-burst picosecond pulses
Authors:
J. -M. Guay,
A. Calà Lesina,
J. Baxter,
M. Charron,
G. Côté,
L. Ramunno,
P. Berini,
A. Weck
Abstract:
We report on the creation of angle-independent colors on silver using closely time-spaced laser bursts. The use of burst mode, compared to traditional non-burst is shown to increase the Chroma (color saturation) by ~50% and to broaden the lightness range by up to ~60%. Scanning electron microscope analysis of the surfaces created using burst mode, reveal the creation of 3 distinct sets of laser in…
▽ More
We report on the creation of angle-independent colors on silver using closely time-spaced laser bursts. The use of burst mode, compared to traditional non-burst is shown to increase the Chroma (color saturation) by ~50% and to broaden the lightness range by up to ~60%. Scanning electron microscope analysis of the surfaces created using burst mode, reveal the creation of 3 distinct sets of laser induced periodic surface structures (LIPSS): low spatial frequency LIPSS (LSFL), high spatial frequency LIPSS (HSFL) and large laser-induced periodic surface structures (LLIPSS) that are 10 times the laser wavelength and parallel to the laser polarization. Nanoparticles are responsible for each plasmonic color and their distributions are observed to be similar for both burst and non-burst modes, indicating that the underlying structures (i.e. LIPSSs) are responsible for the increased Chroma and Lightness. Two-temperature model simulations of silver irradiated by laser bursts show significant increase in the electron-phonon coupling coefficient which is crucial for the creation of well-defined ripple structures. Finite difference time domain (FDTD) simulations of the colored surfaces show the increase in Chroma to be attributable to the HSFL arising in burst mode.
△ Less
Submitted 15 September, 2016;
originally announced September 2016.
-
Topographical coloured plasmonic coins
Authors:
Jean-Michel Guay,
Antonino Calà Lesina,
Guillaume Côté,
Martin Charron,
Lora Ramunno,
Pierre Berini,
Arnaud Weck
Abstract:
The use of metal nanostructures for colourization has attracted a great deal of interest with the recent developments in plasmonics. However, the current top-down colourization methods based on plasmonic concepts are tedious and time consuming, and thus unviable for large-scale industrial applications. Here we show a bottom-up approach where, upon picosecond laser exposure, a full colour palette i…
▽ More
The use of metal nanostructures for colourization has attracted a great deal of interest with the recent developments in plasmonics. However, the current top-down colourization methods based on plasmonic concepts are tedious and time consuming, and thus unviable for large-scale industrial applications. Here we show a bottom-up approach where, upon picosecond laser exposure, a full colour palette independent of viewing angle can be created on noble metals. We show that colours are related to a single laser processing parameter, the total accumulated fluence, which makes this process suitable for high throughput industrial applications. Statistical image analyses of the laser irradiated surfaces reveal various distributions of nanoparticle sizes which control colour. Quantitative comparisons between experiments and large-scale finite-difference time-domain computations, demonstrate that colours are produced by selective absorption phenomena in heterogeneous nanoclusters. Plasmonic cluster resonances are thus found to play the key role in colour formation.
△ Less
Submitted 9 September, 2016;
originally announced September 2016.
