-
Coherent Imaging with Photonic Lanterns
Authors:
Yoo Jung Kim,
Michael P. Fitzgerald,
Jonathan Lin,
Steph Sallum,
Yinzi Xin,
Nemanja Jovanovic,
Sergio Leon-Saval
Abstract:
Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pup…
▽ More
Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pupil, analogous to subapertures in aperture masking interferometry (AMI). Coherent imaging with PLs can be enabled by interfering SMF outputs and applying phase modulation, which can be achieved using a photonic chip beam combiner at the backend (e.g., the ABCD beam combiner). In this study, we investigate the potential of coherent imaging by interfering SMF outputs of a PL with a single telescope. We demonstrate that the visibilities that can be measured from a PL are mutual intensities incident on the pupil weighted by the cross-correlation of a pair of lantern modes. From numerically simulated lantern principal modes of a 6-port PL, we find that interferometric observables using a PL behave similarly to separated-aperture visibilities for simple models on small angular scales ($<λ/D$) but with greater sensitivity to symmetries and capability to break phase angle degeneracies. Furthermore, we present simulated observations with wavefront errors and compare them to AMI. Despite the redundancy caused by extended lantern principal modes, spatial filtering offers stability to wavefront errors. Our simulated observations suggest that PLs may offer significant benefits in the photon noise-limited regime and in resolving small angular scales at low contrast regime.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Demonstration of a photonic lantern focal-plane wavefront sensor: measurement of atmospheric wavefront error modes and low wind effect in the non-linear regime
Authors:
** Wei,
Barnaby Norris,
Christopher Betters,
Sergio Leon-Saval
Abstract:
Here we present a laboratory analysis of the use of a 19-core photonic lantern (PL) in combination with neural network (NN) algorithms as an efficient focal plane wavefront sensor (FP-WFS) for adaptive optics (AO), measuring wavefront errors such as low wind effect (LWE), Zernike modes and Kolmogorov phase maps. The aberrated wavefronts were experimentally simulated using a Spatial Light Modulator…
▽ More
Here we present a laboratory analysis of the use of a 19-core photonic lantern (PL) in combination with neural network (NN) algorithms as an efficient focal plane wavefront sensor (FP-WFS) for adaptive optics (AO), measuring wavefront errors such as low wind effect (LWE), Zernike modes and Kolmogorov phase maps. The aberrated wavefronts were experimentally simulated using a Spatial Light Modulator (SLM) with combinations of different phase maps in both the linear regime (average incident RMS wavefront error (WFE) of 0.88 rad) and in the non-linear regime (average incident RMS WFE of 1.5 rad). Results were analysed using a NN to determine the transfer function of the relationship between the incident wavefront error (WFE) at the input modes at the multimode input of the PL and the intensity distribution output at the multicore fibre outputs end of the PL. The root mean square error (RMSE) of the reconstruction of petal and LWE modes were just $2.87\times10^{-2}$ rad and $2.07\times10^{-1}$ rad respectively, in the non-linear regime. The reconstruction RMSE for Zernike combinations ranged from $5.67\times10^{-2}$ rad to $8.43\times10^{-1}$ rad, depending on the number of Zernike terms and incident RMS WFE employed. These results demonstrate the promising potential of PLs as an innovative FP-WFS in conjunction with NNs.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
Focal-plane wavefront sensing with photonic lanterns II: numerical characterization and optimization
Authors:
Jonathan Lin,
Michael P. Fitzgerald,
Yinzi Xin,
Yoo Jung Kim,
Olivier Guyon,
Sergio Leon-Saval,
Barnaby Norris,
Nemanja Jovanovic
Abstract:
We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact o…
▽ More
We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact of beam-sha** optics and a charge-1 vortex mask, placed in the pupil plane. The former is motivated by the application of PLs to high-resolution spectroscopy, which could enable efficient injection into the spectrometer along with simultaneous focal-plane wavefront sensing; similarly, the latter is motivated by the application of PLs to vortex fiber nulling (VFN), which can simultaneously enable wavefront sensing and the nulling of on-axis starlight. Overall, we find that the PLWFS setups tested in this work exhibit good linearity out to ~0.25-0.5 radians of RMS wavefront error (WFE). Meanwhile, we estimate the maximum amount of WFE that can be handled by these sensors, before the sensor response becomes degenerate, to be around ~1-2 radians RMS. In the future, we expect these limits can be pushed further by increasing the number of degrees of freedom, either by adopting higher-mode-count lanterns, dispersing lantern outputs, or separating polarizations. Lastly, we consider optimization strategies for the design of the PLWFS, which involve both modification of the lantern itself and the use of pre- and post-lantern optics like phase masks and interferometric beam recombiners.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
The path to detecting extraterrestrial life with astrophotonics
Authors:
Nemanja Jovanovic,
Yinzi Xin,
Michael P. Fitzgerald,
Olivier Guyon,
Peter Tuthill,
Barnaby Norris,
Pradip Gatkine,
Greg Sercel,
Svarun Soda,
Yoo Jung Kim,
Jonathan Lin,
Sergio Leon-Saval,
Rodrigo Amezcua-Correa,
Stephanos Yerolatsitis,
Julien Lozi,
Sebastien Vievard,
Chris Betters,
Steph Sallum,
Daniel Levinstein,
Dimitri Mawet,
Jeffrey Jewell,
J. Kent Wallace,
Nick Cvetojevic
Abstract:
Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far,…
▽ More
Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a ga** void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
Achromatic design of a photonic tricoupler and phase shifter for broadband nulling interferometry
Authors:
Teresa Klinner-Teo,
Marc-Antoine Martinod,
Peter Tuthill,
Simon Gross,
Barnaby Norris,
Sergio Leon-Saval
Abstract:
Nulling interferometry is one of the most promising technologies for imaging exoplanets within stellar habitable zones. The use of photonics for carrying out nulling interferometry enables the contrast and separation required for exoplanet detection. So far, two key issues limiting current-generation photonic nullers have been identified: phase variations and chromaticity within the beam combiner.…
▽ More
Nulling interferometry is one of the most promising technologies for imaging exoplanets within stellar habitable zones. The use of photonics for carrying out nulling interferometry enables the contrast and separation required for exoplanet detection. So far, two key issues limiting current-generation photonic nullers have been identified: phase variations and chromaticity within the beam combiner. The use of tricouplers addresses both limitations, delivering a broadband, achromatic null together with phase measurements for fringe tracking. Here, we present a derivation of the transfer matrix of the tricoupler, including its chromatic behaviour, and our 3D design of a fully symmetric tricoupler, built upon a previous design proposed for the GLINT instrument. It enables a broadband null with symmetric, baseline-phase-dependent splitting into a pair of bright channels when inputs are in anti-phase. Within some design trade space, either the science signal or the fringe tracking ability can be prioritised. We also present a tapered-waveguide $180^\circ$-phase shifter with a phase variation of $0.6^\circ$ in the $1.4-1.7~μ$m band, producing a near-achromatic differential phase between beams{ for optimal operation of the tricoupler nulling stage}. Both devices can be integrated to deliver a deep, broadband null together with a real-time fringe phase metrology signal.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
Focal-plane wavefront sensing with photonic lanterns I: theoretical framework
Authors:
Jonathan Lin,
Michael Fitzgerald,
Yinzi Xin,
Olivier Guyon,
Sergio Leon-Saval,
Barnaby Norris,
Nemanja Jovanovic
Abstract:
The photonic lantern (PL) is a tapered waveguide that can efficiently couple light into multiple single-mode optical fibers. Such devices are currently being considered for a number of tasks, including the coupling of telescopes and high-resolution, fiber-fed spectrometers, coherent detection, nulling interferometry, and vortex-fiber nulling (VFN). In conjunction with these use cases, PLs can simu…
▽ More
The photonic lantern (PL) is a tapered waveguide that can efficiently couple light into multiple single-mode optical fibers. Such devices are currently being considered for a number of tasks, including the coupling of telescopes and high-resolution, fiber-fed spectrometers, coherent detection, nulling interferometry, and vortex-fiber nulling (VFN). In conjunction with these use cases, PLs can simultaneously perform low-order focal-plane wavefront sensing. In this work, we provide a mathematical framework for the analysis of the photonic lantern wavefront sensor (PLWFS), deriving linear and higher-order reconstruction models as well as metrics through which sensing performance -- both in the linear and nonlinear regimes -- can be quantified. This framework can be extended to account for additional optics such as beam-sha** optics and vortex masks, and is generalizable to other wavefront sensing architectures. Lastly, we provide initial numerical verification of our mathematical models, by simulating a 6-port PLWFS. In a companion paper, we provide a more comprehensive numerical characterization of few-port PLWFSs, and consider how the sensing properties of these devices can be controlled and optimized.
△ Less
Submitted 22 August, 2022;
originally announced August 2022.
-
Learning the Lantern: Neural network applications to broadband photonic lantern modelling
Authors:
David Sweeney,
Barnaby R. M. Norris,
Peter Tuthill,
Richard Scalzo,
** Wei,
Christopher H. Betters,
Sergio G. Leon-Saval
Abstract:
Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can b…
▽ More
Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can bridge the disparate opto-electronic systems, and when trained can achieve a speed-up of over 5 orders of magnitude. We show that this approach can be used to model photonic lanterns with manufacturing defects as well as successfully generalising to polychromatic data. We demonstrate two uses of these neural network models, propagating seeing through the photonic lantern as well as performing global optimisation for purposes such as photonic lantern funnels and photonic lantern nullers.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
Seeking celestial Positronium with an OH-suppressed diffraction-limited spectrograph
Authors:
J. Gordon Robertson,
Simon Ellis,
Qingshan Yu,
Joss Bland-Hawthorn,
Christopher Betters,
Martin Roth,
Sergio Leon-Saval
Abstract:
Celestially, Positronium (Ps), has only been observed through gamma-ray emission produced by its annihilation. However, in its triplet state, a Ps atom has a mean lifetime long enough for electronic transitions to occur between quantum states. This produces a recombination spectrum observable in principle at near IR wavelengths, where angular resolution greatly exceeding that of the gamma-ray obse…
▽ More
Celestially, Positronium (Ps), has only been observed through gamma-ray emission produced by its annihilation. However, in its triplet state, a Ps atom has a mean lifetime long enough for electronic transitions to occur between quantum states. This produces a recombination spectrum observable in principle at near IR wavelengths, where angular resolution greatly exceeding that of the gamma-ray observations is possible. However, the background in the NIR is dominated by extremely bright atmospheric hydroxyl (OH) emission lines. In this paper we present the design of a diffraction-limited spectroscopic system using novel photonic components - a photonic lantern, OH Fiber Bragg Grating filters, and a photonic TIGER 2-dimensional pseudo-slit - to observe the Ps Balmer alpha line at 1.3122 microns for the first time.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
All-fiber photonic lantern multimode optical receiver with coherent adaptive optics beam combining
Authors:
Bo Zhang,
Jianfeng Sun,
Chenzhe Lao,
Christopher H Betters,
Alexander Argyros,
Yu Zhou,
Sergio G. Leon-Saval
Abstract:
A multimode optical receiver for free space optical communications (FSOC) based on a photonic lantern and adaptive optics coherent beam combining (CBC) of the lantern's single-mode outputs is proposed and demonstrated for the first time. The use of optical coherent combining in fiber serves to increase the signal to noise ratio compared to similar receivers based on electrically combined signals,…
▽ More
A multimode optical receiver for free space optical communications (FSOC) based on a photonic lantern and adaptive optics coherent beam combining (CBC) of the lantern's single-mode outputs is proposed and demonstrated for the first time. The use of optical coherent combining in fiber serves to increase the signal to noise ratio compared to similar receivers based on electrically combined signals, and represents an all-fiber approach to low-order adaptive optics. This optical receiver is demonstrated using a photonic lantern with three outputs, fibre couplers and active phase locking, and further investigated under atmospheric conditions with and without turbulence.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
A Multi-Core Fibre Photonic Lantern Based Spectrograph for Raman Spectroscopy
Authors:
Christopher H. Betters,
Joss Bland-Hawthorn,
Salah Sukkarieh,
Itandehui Gris-Sanchez,
Sergio G. Leon-Saval
Abstract:
We report on the development of a compact (volume $\approx$ 100\:cm$^3$), multimode diffraction-limited Raman spectrograph and probe designed to be compact as possible. The spectrograph uses `off the shelf' optics, a custom 3D-printed two-part housing and harnesses a multi-core fibre (MCF) photonic lantern (multimode to few-mode converter), which slices a large 40~\textmu m multimode input into a…
▽ More
We report on the development of a compact (volume $\approx$ 100\:cm$^3$), multimode diffraction-limited Raman spectrograph and probe designed to be compact as possible. The spectrograph uses `off the shelf' optics, a custom 3D-printed two-part housing and harnesses a multi-core fibre (MCF) photonic lantern (multimode to few-mode converter), which slices a large 40~\textmu m multimode input into a near-diffraction-limited 6~\textmu m aperture. Our unique design utilises the hexagonal geometry of our MCF, permitting high multimode collection efficiency with near-diffraction-limited performance in a compact design. Our approach does not require a complex reformatter or mask and thus preserves spectral information and throughput when forming the entrance slit of the spectrograph. We demonstrate the technology over the interval 800~nm to 940~nm (200~cm$^{-1}$ to 2000~cm$^{-1}$) with a resolution of 0.3\:nm (4\:cm$^{-1}$), but other spectral regions and resolutions from the UV to the near infrared are also possible. We demonstrate the performance of our system by recording the Raman spectra of several compounds, including the pharmaceuticals paracetamol and ibuprofen.
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
Astro2020: Astrophotonics White Paper
Authors:
Pradip Gatkine,
Sylvain Veilleux,
John Mather,
Christopher Betters,
Jonathan Bland-Hawthorn,
Julia Bryant,
S. Bradley Cenko,
Mario Dagenais,
Drake Deming,
Simon Ellis,
Matthew Greenhouse,
Andrew Harris,
Nemanja Jovanovic,
Steve Kuhlmann,
Alexander Kutyrev,
Sergio Leon-Saval,
Kalaga Madhav,
Samuel Moseley,
Barnaby Norris,
Bernard Rauscher,
Martin Roth,
Stuart Vogel
Abstract:
Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic pla…
▽ More
Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic platform of guided light in fibers and waveguides has opened the doors to next-generation instrumentation for both ground- and space-based telescopes in optical and near/mid-IR bands, particularly for the upcoming extremely large telescopes (ELTs). The large telescopes are pushing the limits of adaptive optics to reach close to a near-diffraction-limited performance. The photonic devices are ideally suited for capturing this AO-corrected light and enabling new and exciting science such as characterizing exoplanet atmospheres. The purpose of this white paper is to summarize the current landscape of astrophotonic devices and their scientific impact, highlight the key issues, and outline specific technological and organizational approaches to address these issues in the coming decade and thereby enable new discoveries as we embark on the era of extremely large telescopes.
△ Less
Submitted 12 July, 2019;
originally announced July 2019.
-
Efficient injection from large telescopes into single-mode fibres: Enabling the era of ultra-precision astronomy
Authors:
N. Jovanovic,
C. Schwab,
O. Guyon,
J. Lozi,
N. Cvetojevic,
F. Martinache,
S. Leon-Saval,
B. Norris,
S. Gross,
D. Doughty,
T. Currie,
N. Takato
Abstract:
Photonic technologies offer numerous advantages for astronomical instruments such as spectrographs and interferometers owing to their small footprints and diverse range of functionalities. Operating at the diffraction-limit, it is notoriously difficult to efficiently couple such devices directly with large telescopes. We demonstrate that with careful control of both the non-ideal pupil geometry of…
▽ More
Photonic technologies offer numerous advantages for astronomical instruments such as spectrographs and interferometers owing to their small footprints and diverse range of functionalities. Operating at the diffraction-limit, it is notoriously difficult to efficiently couple such devices directly with large telescopes. We demonstrate that with careful control of both the non-ideal pupil geometry of a telescope and residual wavefront errors, efficient coupling with single-mode devices can indeed be realised. A fibre injection was built within the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument. Light was coupled into a single-mode fibre operating in the near-IR (J-H bands) which was downstream of the extreme adaptive optics system and the pupil apodising optics. A coupling efficiency of 86% of the theoretical maximum limit was achieved at 1550 nm for a diffraction-limited beam in the laboratory, and was linearly correlated with Strehl ratio. The coupling efficiency was constant to within <30% in the range 1250-1600 nm. Preliminary on-sky data with a Strehl ratio of 60% in the H-band produced a coupling efficiency into a single-mode fibre of ~50%, consistent with expectations. The coupling was >40% for 84% of the time and >50% for 41% of the time. The laboratory results allow us to forecast that extreme adaptive optics levels of correction (Strehl ratio >90% in H-band) would allow coupling of >67% (of the order of coupling to multimode fibres currently). For Strehl ratios <20%, few-port photonic lanterns become a superior choice but the signal-to-noise must be considered. These results illustrate a clear path to efficient on-sky coupling into a single-mode fibre, which could be used to realise modal-noise-free radial velocity machines, very-long-baseline optical/near-IR interferometers and/or simply exploit photonic technologies in future instrument design.
△ Less
Submitted 26 August, 2017; v1 submitted 27 June, 2017;
originally announced June 2017.
-
Air-structured optical fibre drawn from a 3D-printed preform
Authors:
Kevin Cook,
John Canning,
Sergio Leon-Saval,
Zane Reid,
Md Arafat Hossain,
Jade-Edouard Comatti,
Yanhua Luo,
Gang-Ding Peng
Abstract:
A structured optical fibre is drawn from a 3D-printed structured preform. Preforms containing a single ring of holes around the core are fabricated using filament made from a modified butadiene polymer. More broadly, 3D printers capable of processing soft glasses, silica and other materials are likely to come on line in the not-so distant future. 3D printing of optical preforms signals a new miles…
▽ More
A structured optical fibre is drawn from a 3D-printed structured preform. Preforms containing a single ring of holes around the core are fabricated using filament made from a modified butadiene polymer. More broadly, 3D printers capable of processing soft glasses, silica and other materials are likely to come on line in the not-so distant future. 3D printing of optical preforms signals a new milestone in optical fibre manufacture.
△ Less
Submitted 31 August, 2016;
originally announced September 2016.
-
Multicore fibre technology - the road to multimode photonics
Authors:
Joss Bland-Hawthorn,
Seong-Sik Min,
Emma Lindley,
Sergio Leon-Saval,
Simon Ellis,
John Lawrence,
Martin Roth,
Hans-Gerd Lohmannsroben,
Sylvain Veilleux
Abstract:
For the past forty years, optical fibres have found widespread use in ground-based and space-based instruments. In most applications, these fibres are used in conjunction with conventional optics to transport light. But photonics offers a huge range of optical manipulations beyond light transport that were rarely exploited before 2001. The fundamental obstacle to the broader use of photonics is th…
▽ More
For the past forty years, optical fibres have found widespread use in ground-based and space-based instruments. In most applications, these fibres are used in conjunction with conventional optics to transport light. But photonics offers a huge range of optical manipulations beyond light transport that were rarely exploited before 2001. The fundamental obstacle to the broader use of photonics is the difficulty of achieving photonic action in a multimode fibre. The first step towards a general solution was the invention of the photonic lantern (Leon-Saval, Birks & Bland-Hawthorn 2005) and the delivery of high-efficiency devices (< 1 dB loss) five years on (Noordegraaf et al 2009). Multicore fibres (MCF), used in conjunction with lanterns, are now enabling an even bigger leap towards multimode photonics. Until recently, the single-moded cores in MCFs were not sufficiently uniform to achieve telecom (SMF-28) performance. Now that high-quality MCFs have been realized, we turn our attention to printing complex functions (e.g. Bragg gratings for OH suppression) into their N cores. Our first work in this direction used a Mach-Zehnder interferometer (near-field phase mask) but this approach was only adequate for N=7 MCFs as measured by the grating uniformity (Lindley et al 2014). We have now built a Sagnac interferometer that gives a three-fold increase in the depth of field sufficient to print across N > 127 cores. We achieved first light this year with our 500mW Sabre FRED laser. These are sophisticated and complex interferometers. We report on our progress to date and summarize our first-year goals which include multimode OH suppression fibres for the Anglo-Australian Telescope/PRAXIS instrument and the Discovery Channel Telescope/MOHSIS instrument under development at the University of Maryland.
△ Less
Submitted 3 June, 2016;
originally announced June 2016.
-
Photonic Lantern
Authors:
Sergio Leon-Saval,
Alexander Argyros,
Joss Bland-Hawthorn
Abstract:
Photonic lanterns allow for a low-loss transformation of a multimode waveguide into a discrete number of single-mode waveguides and vice versa, thus, enabling the use of single-mode photonic technologies in multimode systems. In this review, we will discuss the theory and function of the photonic lantern, along with several different variants of the technology. We will also discuss some of its app…
▽ More
Photonic lanterns allow for a low-loss transformation of a multimode waveguide into a discrete number of single-mode waveguides and vice versa, thus, enabling the use of single-mode photonic technologies in multimode systems. In this review, we will discuss the theory and function of the photonic lantern, along with several different variants of the technology. We will also discuss some of its applications in more detail.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
The Photonic Lantern
Authors:
T. A. Birks,
I. Gris-Sánchez,
S. Yerolatsitis,
S. G. Leon-Saval,
R. R. Thomson
Abstract:
Photonic lanterns are made by adiabatically merging several single-mode cores into one multimode core. They provide low-loss interfaces between single-mode and multimode systems where the precise optical map** between cores and individual modes is unimportant.
Photonic lanterns are made by adiabatically merging several single-mode cores into one multimode core. They provide low-loss interfaces between single-mode and multimode systems where the precise optical map** between cores and individual modes is unimportant.
△ Less
Submitted 11 March, 2015; v1 submitted 10 March, 2015;
originally announced March 2015.
-
The Photonic TIGER: a multicore fiber-fed spectrograph
Authors:
Sergio G. Leon-Saval,
Christopher H. Betters,
Joss Bland-Hawthorn
Abstract:
We present a proof of concept compact diffraction limited high-resolution fiber-fed spectrograph by using a 2D multicore array input. This high resolution spectrograph is fed by a 2D pseudo-slit, the Photonic TIGER, a hexagonal array of near-diffraction limited single-mode cores. We study the feasibility of this new platform related to the core array separation and rotation with respect to the dis…
▽ More
We present a proof of concept compact diffraction limited high-resolution fiber-fed spectrograph by using a 2D multicore array input. This high resolution spectrograph is fed by a 2D pseudo-slit, the Photonic TIGER, a hexagonal array of near-diffraction limited single-mode cores. We study the feasibility of this new platform related to the core array separation and rotation with respect to the dispersion axis. A 7 core compact Photonic TIGER fiber-fed spectrograph with a resolving power of around R~31000 and 8 nm bandwidth in the IR centered on 1550 nm is demonstrated. We also describe possible architectures based on this concept for building small scale compact diffraction limited Integral Field Spectrographs (IFS).
△ Less
Submitted 14 August, 2012;
originally announced August 2012.
