Showing 1–7 of 7 results for author: Lemke, M

Adjoint-Based Identification of Sound Sources for Sound Reinforcement and Source Localization

Authors: Mathias Lemke, Lewin Stein

Abstract: The identification of sound sources is a common problem in acoustics. Different parameters are sought, among these are signal and position of the sources. We present an adjoint-based approach for sound source identification, which employs computational aeroacoustic techniques. Two different applications are presented as a proof-of-concept: optimization of a sound reinforcement setup and the locali… ▽ More The identification of sound sources is a common problem in acoustics. Different parameters are sought, among these are signal and position of the sources. We present an adjoint-based approach for sound source identification, which employs computational aeroacoustic techniques. Two different applications are presented as a proof-of-concept: optimization of a sound reinforcement setup and the localization of (moving) sound sources. △ Less

Submitted 20 January, 2023; originally announced January 2023.

MSC Class: 76Q05

Journal ref: Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol 145. Springer (2021)

Approximate Acoustic Boundary Conditions in the Time-Domain using Volume Penalization

Authors: Mathias Lemke, Julius Reiss

Abstract: Immersed boundary methods allow describing complex objects on simple Cartesian grids in time-domain simulations. The penalization technique employed here is a physically motivated Brinkman method that models objects as porous material by including a friction term and an effective volume. We investigate how the approach can mimic different acoustic boundary conditions. It is validated concerning di… ▽ More Immersed boundary methods allow describing complex objects on simple Cartesian grids in time-domain simulations. The penalization technique employed here is a physically motivated Brinkman method that models objects as porous material by including a friction term and an effective volume. We investigate how the approach can mimic different acoustic boundary conditions. It is validated concerning different acoustic setups, including rigid walls and various absorber configurations. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Supervised Learning for Multi Zone Sound Field Reproduction under Harsh Environmental Conditions

Authors: Henry Sallandt, Philipp Krah, Mathias Lemke

Abstract: This manuscript presents an approach for multi zone sound field reproduction using supervised learning. Traditional multi zone sound field reproduction methods assume constant speed of sound, neglecting nonlinear effects like wind and temperature stratification. We show how to overcome these restrictions using supervised learning of transfer functions. The quality of the solution is measured by th… ▽ More This manuscript presents an approach for multi zone sound field reproduction using supervised learning. Traditional multi zone sound field reproduction methods assume constant speed of sound, neglecting nonlinear effects like wind and temperature stratification. We show how to overcome these restrictions using supervised learning of transfer functions. The quality of the solution is measured by the acoustic contrast and the reproduction error. Our results show that for the chosen setup, even with relatively small wind speeds, the acoustic contrast and reproduction error can be improved by up to 16 dB, when wind is considered in the trained model. △ Less

Submitted 14 December, 2021; originally announced December 2021.

Comments: Preprint submitted for publication

A "DIY" data acquisition system for acoustic field measurements under harsh conditions

Authors: Steffen Büchholz, Mathias Lemke, Julius Reiss, Jörn Sesterhenn

Abstract: Monitoring active volcanos is an ongoing and important task hel** to understand and predict volcanic eruptions. In recent years, analysing the acoustic properties of eruptions became more relevant. We present an inexpensive, lightweight, portable, easy to use and modular acoustic data acquisition system for field measurements that can record data with up to 100~kHz. The system is based on a Rasp… ▽ More Monitoring active volcanos is an ongoing and important task hel** to understand and predict volcanic eruptions. In recent years, analysing the acoustic properties of eruptions became more relevant. We present an inexpensive, lightweight, portable, easy to use and modular acoustic data acquisition system for field measurements that can record data with up to 100~kHz. The system is based on a Raspberry Pi 3 B running a custom build bare metal operating system. It connects to an external analog - digital converter with the microphone sensor. A GPS receiver allows the logging of the position and in addition the recording of a very accurate time signal synchronously to the acoustic data. With that, it is possible for multiple modules to effectively work as a single microphone array. The whole system can be build with low cost and demands only minimal technical infrastructure. We demonstrate a possible use of such a microphone array by deploying 20 modules on the active volcano \textit{Stromboli} in the Aeolian Islands by Sicily, Italy. We use the collected acoustic data to indentify the sound source position for all recorded eruptions. △ Less

Submitted 25 October, 2020; originally announced October 2020.

Comments: 9 figures at the end

Finite-difference-based simulation and adjoint optimization of gas networks

Authors: Sonja Hossbach, Mathias Lemke, Julius Reiss

Abstract: The stable operation of gas networks is an important optimization target. While for this task commonly finite volume methods are used, we introduce a new finite difference approach. With a summation by part formulation for the spatial discretization, we get well-defined fluxes between the pipes. This allows a simple and explicit formulation of the coupling conditions at the node. From that, we der… ▽ More The stable operation of gas networks is an important optimization target. While for this task commonly finite volume methods are used, we introduce a new finite difference approach. With a summation by part formulation for the spatial discretization, we get well-defined fluxes between the pipes. This allows a simple and explicit formulation of the coupling conditions at the node. From that, we derive the adjoint equations for the network simply and transparently. The resulting direct and adjoint equations are numerically efficient and easy to implement. The approach is demonstrated by the optimization of two sample gas networks. △ Less

Submitted 30 August, 2021; v1 submitted 16 October, 2020; originally announced October 2020.

Mode-based derivation of adjoint equations - a lazy man's approach

Authors: Julius Reiss, Mathias Lemke, Jörn Sesterhenn

Abstract: A method to calculate the adjoint solution for a large class of partial differential equations is discussed. It differs from the known continuous and discrete adjoint, including automatic differentiation. Thus, it represents an alternative, third method. It is based on a modal representation of the linearized operator of the governing (primal) system. To approximate the operator an extended versio… ▽ More A method to calculate the adjoint solution for a large class of partial differential equations is discussed. It differs from the known continuous and discrete adjoint, including automatic differentiation. Thus, it represents an alternative, third method. It is based on a modal representation of the linearized operator of the governing (primal) system. To approximate the operator an extended version of the Arnoldi factorization, the dynamical Arnoldi method (DAM) is introduced. The DAM allows to derive approximations for operators of non-symmetric coupled equations, which are inaccessible by the classical Arnoldi factorization. The approach is applied to the Burgers equation and to the Euler equations on periodic and non-periodic domains. Finally, it is tested on an optimization problem. △ Less

Submitted 7 May, 2018; originally announced May 2018.

Comments: Keywords: adjoint equations, fluid dynamics, Arnoldi method, Krylov subspace, block Arnoldi, dynamic Arnoldi

A parallel and matrix free framework for global stability analysis of compressible flows

Authors: O. Henze, M. Lemke, J. Sesterhenn

Abstract: An numerical iterative framework for global modal stability analysis of compressible flows using a parallel environment is presented. The framework uses a matrix-free implementation to allow computations of large scale problems. Various methods are tested with regard to convergence acceleration of the framework. The methods consist of a spectral Cayley transformation used to select desired Eigenva… ▽ More An numerical iterative framework for global modal stability analysis of compressible flows using a parallel environment is presented. The framework uses a matrix-free implementation to allow computations of large scale problems. Various methods are tested with regard to convergence acceleration of the framework. The methods consist of a spectral Cayley transformation used to select desired Eigenvalues from a large spectrum, an improved linear solver and a parallel block-Jacobi preconditioning scheme. △ Less

Submitted 12 February, 2015; originally announced February 2015.