-
Analysis of Resonance in Jet Screech with Large-Eddy Simulations
Authors:
Gao Jun Wu,
Sanjiva K. Lele,
**ah Jeun
Abstract:
Screech resonance is studied with experimentally validated large-eddy simulation data for a 4:1 rectangular under-expanded jet at three nozzle pressure ratios. The analysis uses spectral proper orthogonal decomposition (SPOD) and spatial cross correlation to characterize the oppositely-traveling waves in the jet at the screech fundamental frequency. The results support recent theoretical framing o…
▽ More
Screech resonance is studied with experimentally validated large-eddy simulation data for a 4:1 rectangular under-expanded jet at three nozzle pressure ratios. The analysis uses spectral proper orthogonal decomposition (SPOD) and spatial cross correlation to characterize the oppositely-traveling waves in the jet at the screech fundamental frequency. The results support recent theoretical framing of screech as absolute instability, and further reveal the spatial separation of individual processes for screech generation. From the leading-order SPOD mode, direct evidence of the guided jet mode being the screech closure mechanism, not the external acoustic feedback, is observed. A match in the spatial wavenumber suggests the guided jet mode is generated via interactions between the Kelvin-Helmholtz wave and the shock cells. The energy of the oppositely-moving waves shows spatially global and non-periodic behavior of the coherent structures in the streamwise direction. The ratio of wave energy identifies regions where distinct processes in screech generation take place by comparing the rate of energy propagation in the downstream direction to that of the upstream direction. The distinct regions correspond to initial shear layer receptivity, sound emission, guided jet mode excitation and decay of coherence. The leading-order SPOD mode also enables the approximation of Lighthill's stress tensor and allows for accurate calculation of the far-field screech tone amplitude with the acoustic analogy formulation. The current findings provide insights on building a physics-based reduced order model for screech amplitude prediction in the future.
△ Less
Submitted 2 April, 2023;
originally announced April 2023.
-
Airfoil trailing-edge noise source identification using large-eddy simulation and wavelet transform
Authors:
Seongkyu Lee,
Donghun Kang,
Davy Joao Etienne Brouzet,
Sanjiva K. Lele
Abstract:
Airfoil noise is predicted and analyzed using wall-resolved large-eddy simulations and wavelet transforms for a NACA 0012 airfoil at a Mach number of 0.06 and a Reynolds number of 400,000 using a stair-strip forced transition and a natural transition. At a high angle of attack, vortex shedding and a laminar separation bubble (LSB) occur on the suction side. The LSB triggers the flow transition for…
▽ More
Airfoil noise is predicted and analyzed using wall-resolved large-eddy simulations and wavelet transforms for a NACA 0012 airfoil at a Mach number of 0.06 and a Reynolds number of 400,000 using a stair-strip forced transition and a natural transition. At a high angle of attack, vortex shedding and a laminar separation bubble (LSB) occur on the suction side. The LSB triggers the flow transition for both the forced and natural transition cases. The wavelet thresholding and denoising algorithm is used to decompose the pressure fields into the coherent or denoised pressure and the incoherent or background noise pressure. This denoising technique provides a clear picture of true noise generation and propagation. It also reveals the dominant noise source at specific frequencies when multiple noise sources are present. In another usage, the wavelet thresholding algorithm with down-sampling separates noise on the basis of flow structures. For example, the wavelet method separates noise between low-frequency vortex shedding noise and high-frequency LSB noise as well as trailing-edge noise. Finally, the wavelet transform is used to decompose the hydrodynamic and acoustic pressure components near the surface using the coherence between near-field pressure and far-field pressure. Overall, the wavelet-based decomposition is a valuable tool to study and reveal the mechanisms of airfoil noise generation.
△ Less
Submitted 11 February, 2023;
originally announced February 2023.
-
A closure mechanism for screech coupling in rectangular twin jets
Authors:
**ah Jeun,
Gao Jun Wu,
Sanjiva K. Lele
Abstract:
Twin-jet configuration allows two different scenarios to close the screech feedback. For each jet, there is one loop involving disturbances which originate in that jet and arrive at its own receptivity point in-phase (self-excitation). The other loop is associated with free-stream acoustic waves that radiate from the other jet, reinforcing the self-excited screech (cross-excitation). In this work,…
▽ More
Twin-jet configuration allows two different scenarios to close the screech feedback. For each jet, there is one loop involving disturbances which originate in that jet and arrive at its own receptivity point in-phase (self-excitation). The other loop is associated with free-stream acoustic waves that radiate from the other jet, reinforcing the self-excited screech (cross-excitation). In this work, the role of the free-stream acoustic mode and the guided jet mode as a closure mechanism for twin rectangular jet screech is explored by identifying eligible points of return for each path, where upstream waves propagating from such a point arrive at the receptivity location with an appropriate phase relation. Screech tones generated by these jets are found to be intermittent with an out-of-phase coupling as a dominant coupling mode. Instantaneous phase difference between the twin jets computed by the Hilbert transform suggests that a competition between out-of-phase and in-phase coupling is responsible for the intermittency. To model wave components of the screech feedback while ensuring perfect phase-locking, an ensemble average of leading spectral proper orthogonal decomposition modes is obtained from several segments of large-eddy simulations data that correspond to periods of invariant phase difference between the two jets. Each mode is then extracted by retaining relevant wavenumber components produced via a streamwise Fourier transform. Spatial cross-correlation analysis of the resulting modes shows that most of the identified points of return for the cross-excitation are synchronised with the guided jet mode self-excitation, supporting that it is preferred in closing rectangular twin-jet screech coupling.
△ Less
Submitted 11 April, 2024; v1 submitted 20 October, 2022;
originally announced October 2022.
-
Analysis of second-moments and their budgets for Richtmyer-Meshkov instability and variable-density turbulence induced by re-shock
Authors:
Man Long Wong,
Jon R. Baltzer,
Daniel Livescu,
Sanjiva K. Lele
Abstract:
Nonlinear Richtmyer--Meshkov instability and mixing transition induced by a Mach 1.45 shock and subsequent re-shock at an interface between two ideal gases (sulfur hexafluoride and air) with high Atwood number are studied with second-moment analysis using data from high-resolution compressible Navier--Stokes simulations. The analysis first addresses the importance of two second-order moments: turb…
▽ More
Nonlinear Richtmyer--Meshkov instability and mixing transition induced by a Mach 1.45 shock and subsequent re-shock at an interface between two ideal gases (sulfur hexafluoride and air) with high Atwood number are studied with second-moment analysis using data from high-resolution compressible Navier--Stokes simulations. The analysis first addresses the importance of two second-order moments: turbulent mass flux and density-specific-volume covariance, together with their transport equations. These quantities play an essential role in the development of Favre-averaged Reynolds stress and turbulent kinetic energy in this variable-density flow. Then, grid sensitivities and the time evolution of the turbulent quantities which include the second-moments are investigated, followed by a detailed study of the transport equations for the second-moments including the Reynolds stress and the turbulent kinetic energy with well-resolved data before re-shock. After re-shock, budgets of the same but large-scale turbulent quantities are studied with the effects of the subfilter-scale stress taken into account. The budgets of these large-scale quantities are shown to have an insignificant influence from the numerical regularization. Finally, the effects of the subfilter-scale stress on the budgets of the large-scale turbulent quantities with different degrees of filtering are also examined.
△ Less
Submitted 15 April, 2022; v1 submitted 18 November, 2021;
originally announced November 2021.
-
Assessment of diffuse-interface methods for compressible multiphase fluid flows and elastic-plastic deformation in solids
Authors:
Suhas S. Jain,
Michael C. Adler,
Jacob R. West,
Ali Mani,
Parviz Moin,
Sanjiva K. Lele
Abstract:
This work describes three diffuse-interface methods for the simulation of immiscible, compressible multiphase fluid flows and elastic-plastic deformation in solids. The first method is the localized-artificial-diffusivity approach of Cook (2007), Subramaniam et al., (2018), and Adler and Lele (2019), in which artificial diffusion terms are added to the conservation equations. The second method is…
▽ More
This work describes three diffuse-interface methods for the simulation of immiscible, compressible multiphase fluid flows and elastic-plastic deformation in solids. The first method is the localized-artificial-diffusivity approach of Cook (2007), Subramaniam et al., (2018), and Adler and Lele (2019), in which artificial diffusion terms are added to the conservation equations. The second method is the gradient-form approach that is based on the quasi-conservative method of Shukla et al., (2010) and Tiwari et al., (2013), in which the diffusion and sharpening terms (together called regularization terms) are added to the conservation equations. The third approach is the divergence-form approach that is based on the fully conservative method of Jain et al., (2020), in which the regularization terms are added to the conservation equations.
The primary objective of this work is to compare these three methods in terms of their ability to maintain: constant interface thickness; the conservation property; and accurate interface shape for long-time integration. The second objective of this work is to consistently extend these methods to model interfaces between solid materials with strength. To assess and compare the methods, they are used to simulate a wide variety of problems, including (1) advection of an air bubble in water, (2) shock interaction with a helium bubble in air, (3) shock interaction and the collapse of an air bubble in water, and (4) Richtmyer-Meshkov instability of a copper-aluminum interface. The current work focuses on comparing these methods in the limit of relatively coarse grid resolution, which illustrates the true performance of these methods. This is because it is rarely practical to use hundreds of grid points to resolve a single bubble or drop in large-scale simulations of engineering interest.
△ Less
Submitted 20 September, 2021;
originally announced September 2021.
-
Aeroacoustics of Twin Rectangular Jets Including Screech: Large-eddy Simulations with Experimental Validation
Authors:
**ah Jeun,
Aatresh Karnam,
Gao Jun Wu,
Sanjiva K. Lele,
Florian Baier,
Ephraim J. Gutmark
Abstract:
High-fidelity large-eddy simulations (LES) are performed to investigate aeroacoustic characteristics of jets issuing from twin rectangular nozzles with an aspect ratio of 2:1 at two over-expanded conditions and the design condition. For all three jet conditions simulated, LES predicts qualitatively similar near-field flow statistics to those measured at the University of Cincinnati. Using the Ffow…
▽ More
High-fidelity large-eddy simulations (LES) are performed to investigate aeroacoustic characteristics of jets issuing from twin rectangular nozzles with an aspect ratio of 2:1 at two over-expanded conditions and the design condition. For all three jet conditions simulated, LES predicts qualitatively similar near-field flow statistics to those measured at the University of Cincinnati. Using the Ffowcs Williams-Hawkings method, LES captures the fundamental screech tone and its harmonics fairly well at multiple observer locations in the far-field. Intense jet flap** motions in the near-field along the minor axis, which are influenced by jet-to-jet interactions, are found to correspond to those frequencies. Moreover, the predicted overall sound pressure levels are within 1-2 dB of the experimental measurements. However, the screech tones appear to be intermittent, as the twin-jet interaction pattern varies irregularly. To extract dominant flow structures at the screech frequencies and identify the twin-jet coupling modes, spectral proper orthogonal decomposition (SPOD) analysis is used. SPOD analysis recovers energetic peaks at the screech frequencies, and the corresponding leading modes indicate strong upstream radiation originating from the fifth/sixth shock-cells. For the two over-expanded conditions, the leading modes show anti-symmetric coupling in the minor axis at the fundamental screech frequencies. In contrast, the two jets behave symmetrically with respect to each other in the major axis, in line with the absence of jet flap** in this direction. Furthermore, the leading SPOD eigenvalues turn out to be, at least, two orders of magnitude larger than higher-order eigenvalues, suggesting potential of reduced-order models for the twin-jet screech.
△ Less
Submitted 13 July, 2022; v1 submitted 11 May, 2021;
originally announced May 2021.
-
The subgrid scale pressure field of scale-enriched Large Eddy Simulations using Gabor modes
Authors:
Ryan D. Hass,
Aditya S. Ghate,
Sanjiva K. Lele
Abstract:
With the continuing progress in large eddy simulations (LES), and ever increasing computational resources, it is currently possible to numerically solve the time-dependent and anisotropic large scales of turbulence in a large variety of flows. For some applications this large-scale resolution is satisfactory. However, a wide range of engineering problems involve flows at very large Reynolds number…
▽ More
With the continuing progress in large eddy simulations (LES), and ever increasing computational resources, it is currently possible to numerically solve the time-dependent and anisotropic large scales of turbulence in a large variety of flows. For some applications this large-scale resolution is satisfactory. However, a wide range of engineering problems involve flows at very large Reynolds numbers where the subgrid scale dynamics of a practical LES are critically important to design and yet are out of reach given the computational demands of solving the Navier Stokes equations; this difficulty is particularly relevant in wall-bounded turbulence where even the large-scales are often below the implied filter width of modest cost wall modeled LES (WMLES). In this paper we briefly introduce a scale enrichment procedure which leverages spatially and spectrally-localized Gabor modes. The method provides a physically consistent description of the small scale velocity field without solving the full non-linear equations. The enrichment procedure is appraised against its ability to predict small scale contributions to the pressure field. We find that the method accurately extrapolates the pressure spectrum and recovers pressure variance of the full field remarkably well when compared to a computationally expensive, highly resolved LES. The analysis is conducted both in \textit{a priori} and \textit{a posteriori} settings for the case of homogeneous isotropic turbulence (HIT).
△ Less
Submitted 13 December, 2021; v1 submitted 29 December, 2020;
originally announced December 2020.
-
Drag of a Heated Sphere at Low Reynolds Numbers in the Presence of Buoyancy
Authors:
Swetava Ganguli,
Sanjiva K. Lele
Abstract:
Fully resolved simulations are used to quantify the effects of heat transfer in the presence of buoyancy on the drag of a spatially fixed heated spherical particle at low Reynolds numbers ($Re$) in the range $10^{-3} \le Re \le 10$ in a variable property fluid. The amount of heat addition from the sphere encompasses both, the heating regime where the Boussinesq approximation holds and the regime w…
▽ More
Fully resolved simulations are used to quantify the effects of heat transfer in the presence of buoyancy on the drag of a spatially fixed heated spherical particle at low Reynolds numbers ($Re$) in the range $10^{-3} \le Re \le 10$ in a variable property fluid. The amount of heat addition from the sphere encompasses both, the heating regime where the Boussinesq approximation holds and the regime where it breaks down. The particle is assumed to have a low Biot number which means that the particle is uniformly at the same temperature and has no internal temperature gradients. Scaling buoyancy with inertial and viscous forces yields two related non-dimensional quantities, called Buoyancy Induced Viscous Reynolds Number ($Re_{BV}$) and Buoyancy Induced Inertial Reynolds Number ($Re_{BI}$). For ideal gases, $Re_{BV}$ is analogous to the Grashof number ($Gr$). No assumptions are made on the magnitude of $Re_{BI}$ (or equivalently $Re_{BV}$). The effects of the orientation of gravity relative to the free-stream velocity are examined. Large deviations in the value of the drag coefficient are observed when the Froude number ($Fr$) decreases and/or the temperature of the sphere increases. Under appropriate constraints on $Re_{BI}$ and $Re$, the total drag on a heated sphere in a low $Re$ flow in the presence of buoyancy (mixed convection) is shown to be, within 10% error, the linear superposition of the drag computed in two canonical setups: one being the drag on a steadily moving heated sphere in the absence of buoyancy (forced convection) and the other being natural convection. However, the effect of temperature variation on the drag of a sphere in both, forced and natural convection, is significant.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Turbulence Enrichment using Physics-informed Generative Adversarial Networks
Authors:
Akshay Subramaniam,
Man Long Wong,
Raunak D Borker,
Sravya Nimmagadda,
Sanjiva K Lele
Abstract:
Generative Adversarial Networks (GANs) have been widely used for generating photo-realistic images. A variant of GANs called super-resolution GAN (SRGAN) has already been used successfully for image super-resolution where low resolution images can be upsampled to a $4\times$ larger image that is perceptually more realistic. However, when such generative models are used for data describing physical…
▽ More
Generative Adversarial Networks (GANs) have been widely used for generating photo-realistic images. A variant of GANs called super-resolution GAN (SRGAN) has already been used successfully for image super-resolution where low resolution images can be upsampled to a $4\times$ larger image that is perceptually more realistic. However, when such generative models are used for data describing physical processes, there are additional known constraints that models must satisfy including governing equations and boundary conditions. In general, these constraints may not be obeyed by the generated data. In this work, we develop physics-based methods for generative enrichment of turbulence. We incorporate a physics-informed learning approach by a modification to the loss function to minimize the residuals of the governing equations for the generated data. We have analyzed two trained physics-informed models: a supervised model based on convolutional neural networks (CNN) and a generative model based on SRGAN: Turbulence Enrichment GAN (TEGAN), and show that they both outperform simple bicubic interpolation in turbulence enrichment. We have also shown that using the physics-informed learning can also significantly improve the model's ability in generating data that satisfies the physical governing equations. Finally, we compare the enriched data from TEGAN to show that it is able to recover statistical metrics of the flow field including energy metrics and well as inter-scale energy dynamics and flow morphology.
△ Less
Submitted 6 March, 2020; v1 submitted 4 March, 2020;
originally announced March 2020.
-
Homogenized Flux-Body Force Treatment of Compressible Viscous Porous Wall Boundary Conditions
Authors:
Daniel Z. Huang,
Man Long Wong,
Sanjiva K. Lele,
Charbel Farhat
Abstract:
A homogenization approach is proposed for the treatment of porous wall boundary conditions in the computation of compressible viscous flows. Like any other homogenization approach, it eliminates the need for pore-resolved fluid meshes and therefore enables practical flow simulations in computational fluid domains with porous wall boundaries. Unlike alternative approaches however, it does not requi…
▽ More
A homogenization approach is proposed for the treatment of porous wall boundary conditions in the computation of compressible viscous flows. Like any other homogenization approach, it eliminates the need for pore-resolved fluid meshes and therefore enables practical flow simulations in computational fluid domains with porous wall boundaries. Unlike alternative approaches however, it does not require prescribing a mass flow rate and does not introduce in the computational model a heuristic discharge coefficient. Instead, it models the inviscid flux through a porous wall surrounded by the flow as a weighted average of the inviscid flux at an impermeable surface and that through pores. It also introduces a body force term in the governing equations to account for friction loss along the pore boundaries. The source term depends on the thickness of the porous wall and the concept of an equivalent single pore. The feasibility of the latter concept is demonstrated using low-speed permeability test data for the fabric of the Mars Science Laboratory parachute canopy. The overall homogenization approach is illustrated with a series of supersonic flow computations through the same fabric and verified using supersonic, pore-resolved numerical simulations.
△ Less
Submitted 11 December, 2020; v1 submitted 22 July, 2019;
originally announced July 2019.
-
High-resolution Navier-Stokes simulations of Richtmyer-Meshkov instability with re-shock
Authors:
Man Long Wong,
Daniel Livescu,
Sanjiva K. Lele
Abstract:
The interaction of a Mach 1.45 shock wave with a perturbed planar interface between sulphur hexafluoride and air is studied through high-resolution two-dimensional (2D) and three-dimensional (3D) shock-capturing adaptive mesh refinement simulations of multi-species Navier-Stokes equations. The sensitivities of time-dependent statistics on grid resolution for 2D and 3D simulations are evaluated to…
▽ More
The interaction of a Mach 1.45 shock wave with a perturbed planar interface between sulphur hexafluoride and air is studied through high-resolution two-dimensional (2D) and three-dimensional (3D) shock-capturing adaptive mesh refinement simulations of multi-species Navier-Stokes equations. The sensitivities of time-dependent statistics on grid resolution for 2D and 3D simulations are evaluated to ensure the accuracy of the results. The numerical results are used to examine the differences between the development of 2D and 3D Richtmyer-Meshkov instability during two different stages: (1) initial growth of hydrodynamic instability from multi-mode perturbations after first shock and (2) transition to chaotic or turbulent state after re-shock. The effects of the Reynolds number on the mixing in 3D simulations are also studied through varying the transport coefficients.
△ Less
Submitted 12 September, 2019; v1 submitted 4 December, 2018;
originally announced December 2018.
-
A High-Order Weighted Compact High Resolution Scheme with Boundary Closures for Compressible Turbulent Flows with Shocks
Authors:
A. Subramaniam,
M. L. Wong,
S. K. Lele
Abstract:
We present an improved high-order weighted compact high resolution (WCHR) scheme that extends the idea of weighted compact nonlinear schemes (WCNS's) using nonlinear interpolations in conjunction with compact finite difference schemes for shock-capturing in compressible turbulent flows. The proposed scheme has better resolution property than previous WCNS's. This is achieved by using a compact (or…
▽ More
We present an improved high-order weighted compact high resolution (WCHR) scheme that extends the idea of weighted compact nonlinear schemes (WCNS's) using nonlinear interpolations in conjunction with compact finite difference schemes for shock-capturing in compressible turbulent flows. The proposed scheme has better resolution property than previous WCNS's. This is achieved by using a compact (or spatially implicit) form instead of the traditional fully explicit form for the nonlinear interpolation. Since compact interpolation schemes tend to have lower dispersion errors compared to explicit interpolation schemes, the proposed scheme has the ability to resolve more fine-scale features while still having the ability to provide sufficiently localized dissipation to capture shocks and discontinuities robustly. Approximate dispersion relation characteristics of this scheme are analyzed to show the superior resolution properties of the scheme compared to other WCNS's of similar orders of accuracy. Conservative and high-order accurate boundary schemes are also proposed for non-periodic problems. Further, a new conservative flux-difference form for compact finite difference schemes is derived and allows for the use of positivity-preserving limiters for improved robustness. Different test cases demonstrate the ability of this scheme to capture discontinuities in a robust and stable manner while also localizing the required numerical dissipation only to regions containing discontinuities and very high wavenumber features and hence preserving smooth flow features better in comparison to WCNS's.
△ Less
Submitted 1 January, 2021; v1 submitted 15 September, 2018;
originally announced September 2018.
-
High-Order Localized Dissipation Weighted Compact Nonlinear Scheme for Shock- and Interface-Capturing in Compressible Flows
Authors:
M. L. Wong,
S. K. Lele
Abstract:
Simulations of single- and multi-species compressible flows with shock waves and discontinuities are conducted using a weighted compact nonlinear scheme (WCNS) with a newly developed sixth order localized dissipative interpolation. In smooth regions, the scheme applies the central nonlinear interpolation with minimum dissipation to well resolve fluctuating flow features while in regions containing…
▽ More
Simulations of single- and multi-species compressible flows with shock waves and discontinuities are conducted using a weighted compact nonlinear scheme (WCNS) with a newly developed sixth order localized dissipative interpolation. In smooth regions, the scheme applies the central nonlinear interpolation with minimum dissipation to well resolve fluctuating flow features while in regions containing discontinuities and high wavenumber features, the scheme suppresses spurious numerical oscillations by hybridizing the central interpolation with the more dissipative upwind-biased nonlinear interpolation. In capturing material interfaces between species of different densities, a quasi-conservative five equation model that can conserve mass of each species is used to prevent pressure oscillations across the interfaces. Compared to upwind-biased interpolations with classical nonlinear weights and improved weights, and the interpolation with adaptive central-upwind weights for scale-separation, it is shown that WCNS with the proposed localized dissipative interpolation has better performance to simultaneously capture discontinuities and resolve smooth features.
△ Less
Submitted 1 January, 2021; v1 submitted 30 January, 2017;
originally announced January 2017.
-
Linear and Nonlinear Modeling of a Traveling-Wave Thermoacoustic Heat Engine
Authors:
Carlo Scalo,
Sanjiva K. Lele,
Lambertus Hesselink
Abstract:
We have carried out three-dimensional Navier-Stokes simulations, from quiescent conditions to the limit cycle, of a traveling-wave thermoacoustic heat engine (TAE) composed of a long variable-area resonator shrouding a smaller annular tube, which encloses the hot (HHX) and ambient (AHX) heat-exchangers, and the regenerator (REG). Simulations are wall-resolved, with no-slip and adiabatic conditions…
▽ More
We have carried out three-dimensional Navier-Stokes simulations, from quiescent conditions to the limit cycle, of a traveling-wave thermoacoustic heat engine (TAE) composed of a long variable-area resonator shrouding a smaller annular tube, which encloses the hot (HHX) and ambient (AHX) heat-exchangers, and the regenerator (REG). Simulations are wall-resolved, with no-slip and adiabatic conditions enforced at all boundaries, while the heat transfer and drag due to the REG and HXs are modeled. HHX temperatures have been investigated in the range 440K - 500K with AHX temperature fixed at 300K. The initial exponential growth of acoustic energy is due to a network of traveling waves amplified by loo** around the REG/HX unit in the direction of the imposed temperature gradient. A simple analytical model demonstrates that such thermoacoustic instability is a Lagrangian thermodynamic process resembling a Stirling cycle. A system-wide linear stability model based on Rott's theory is able to accurately predict the frequency and the growth rate, exhibiting properties consistent with a supercritical Hopf bifurcation. The limit cycle is governed by acoustic streaming -- a rectified flow resulting from high-amplitude acoustics. Its key features are explained with an axially symmetric incompressible model driven by the wave-induced stresses extracted from the compressible calculations. These features include Gedeon streaming and mean recirculations due to flow separation. The first drives the mean advection of hot fluid from the HHX to a secondary heat exchanger (AHX2), in the thermal buffer tube (TBT), necessary to achieve saturation of the acoustic energy growth. The direct evaluation of the energy fluxes reveals that the efficiency of the device deteriorates with the drive ratio and that the acoustic power in the TBT is balanced primarily by the mean advection and thermoacoustic heat transport.
△ Less
Submitted 18 August, 2014;
originally announced August 2014.
-
On the Richtmyer-Meshkov instability evolving from a deterministic multimode planar interface
Authors:
V. K. Tritschler,
B. J. Olson,
S. K. Lele,
S. Hickel,
X. Y. Hu,
N. A. Adams
Abstract:
We investigate the shock-induced turbulent mixing between a light and heavy gas, where a Richtmyer-Meshkov instability (RMI) is initiated by a $\Ma = 1.5$ shock wave. The prescribed initial conditions define a deterministic multimode interface perturbation between the gases, which can be imposed exactly for different simulation codes and resolutions to allow for quantitative comparison. Well-resol…
▽ More
We investigate the shock-induced turbulent mixing between a light and heavy gas, where a Richtmyer-Meshkov instability (RMI) is initiated by a $\Ma = 1.5$ shock wave. The prescribed initial conditions define a deterministic multimode interface perturbation between the gases, which can be imposed exactly for different simulation codes and resolutions to allow for quantitative comparison. Well-resolved large-eddy simulations are performed using two different and independently developed numerical methods with the objective of assessing turbulence structures, prediction uncertainties and convergence behaviour. The two numerical methods differ fundamentally with respect to the employed subgrid-scale regularisation, each representing state-of-the-art approaches to RMI. Unlike previous studies the focus of the present investigation is to quantify uncertainties introduced by the numerical method, as there is strong evidence that subgrid-scale regularisation and truncation errors may have a significant effect on the linear and non-linear stages of the RMI evolution. Fourier diagnostics reveal that the larger energy containing scales converge rapidly with increasing mesh resolution and thus are in excellent agreement for the two numerical methods. Spectra of gradient dependent quantities, such as enstrophy and scalar dissipation rate, show stronger dependencies on the small-scale flow field structures in consequence of truncation error effects, which for one numerical method are dominantly dissipative and for the other dominantly dispersive.
△ Less
Submitted 13 June, 2014; v1 submitted 6 February, 2014;
originally announced February 2014.
-
The Shock and the Turbulence: the story of an interaction
Authors:
Ivan Bermejo-Moreno,
Johan Larsson,
Sanjiva K. Lele
Abstract:
Video highlighting multiple features of the interaction between isotropic turbulence and a nominally planar shock wave, normal to the mean flow direction. The visualizations showcased in this video were obtained from a Direct Numerical Simulation.
Video highlighting multiple features of the interaction between isotropic turbulence and a nominally planar shock wave, normal to the mean flow direction. The visualizations showcased in this video were obtained from a Direct Numerical Simulation.
△ Less
Submitted 5 October, 2013; v1 submitted 3 October, 2013;
originally announced October 2013.
-
Ubiquitous Solar Eruptions Driven by Magnetized Vortex Tubes
Authors:
I. N. Kitiashvili,
A. G. Kosovichev,
S. K. Lele,
N. N. Mansour,
A. A. Wray
Abstract:
The solar surface is covered by high-speed jets transporting mass and energy into the solar corona and feeding the solar wind. The most prominent of these jets have been known as spicules. However, the mechanism initiating these eruptions events is still unknown. Using realistic numerical simulations we find that small-scale eruptions are produced by ubiquitous magnetized vortex tubes generated by…
▽ More
The solar surface is covered by high-speed jets transporting mass and energy into the solar corona and feeding the solar wind. The most prominent of these jets have been known as spicules. However, the mechanism initiating these eruptions events is still unknown. Using realistic numerical simulations we find that small-scale eruptions are produced by ubiquitous magnetized vortex tubes generated by the Sun's turbulent convection in subsurface layers. The swirling vortex tubes (resembling tornadoes) penetrate into the solar atmosphere, capture and stretch background magnetic field, and push surrounding material up, generating quasiperiodic shocks. Our simulations reveal a complicated high-speed flow patterns, and thermodynamic and magnetic structure in the erupting vortex tubes. We found that the eruptions are initiated in the subsurface layers and are driven by the high-pressure gradients in the subphotosphere and photosphere, and by the Lorentz force in the higher atmosphere layers.
△ Less
Submitted 31 December, 2012;
originally announced January 2013.
-
Turbulent Kinetic Energy Spectra of Solar Convection from NST Observations and Realistic MHD Simulations
Authors:
I. N. Kitiashvili,
V. I. Abramenko,
P. R. Goode,
A. G. Kosovichev,
S. K. Lele,
N. N. Mansour,
A. A. Wray,
V. B. Yurchyshyn
Abstract:
Turbulent properties of the quiet Sun represent the basic state of surface conditions, and a background for various processes of solar activity. Therefore understanding of properties and dynamics of this `basic' state is important for investigation of more complex phenomena, formation and development of observed phenomena in the photosphere and atmosphere. For characterization of the turbulent pro…
▽ More
Turbulent properties of the quiet Sun represent the basic state of surface conditions, and a background for various processes of solar activity. Therefore understanding of properties and dynamics of this `basic' state is important for investigation of more complex phenomena, formation and development of observed phenomena in the photosphere and atmosphere. For characterization of the turbulent properties we compare kinetic energy spectra on granular and sub-granular scales obtained from infrared TiO observations with the New Solar Telescope (Big Bear Solar Observatory) and from 3D radiative MHD numerical simulations ('SolarBox' code). We find that the numerical simulations require a high spatial resolution with 10 - 25 km grid-step in order to reproduce the inertial (Kolmogorov) turbulence range. The observational data require an averaging procedure to remove noise and potential instrumental artifacts. The resulting kinetic energy spectra show a good agreement between the simulations and observations, opening new perspectives for detailed joint analysis of more complex turbulent phenomena on the Sun, and possibly on other stars. In addition, using the simulations and observations we investigate effects of background magnetic field, which is concentrated in self-organized complicated structures in intergranular lanes, and find an increase of the small-scale turbulence energy and its decrease at larger scales due to magnetic field effects.
△ Less
Submitted 22 June, 2012;
originally announced June 2012.
-
Vortex Tubes of Turbulent Solar Convection
Authors:
I. N. Kitiashvili,
A. G. Kosovichev,
N. N. Mansour,
S. K. Lele,
A. A. Wray
Abstract:
Investigation of the turbulent properties of solar convection is extremely important for understanding the multi-scale dynamics observed on the solar surface. In particular, recent high-resolution observations have revealed ubiquitous vortical structures, and numerical simulations have demonstrated links between vortex tube dynamics and magnetic field organization and have shown the importance of…
▽ More
Investigation of the turbulent properties of solar convection is extremely important for understanding the multi-scale dynamics observed on the solar surface. In particular, recent high-resolution observations have revealed ubiquitous vortical structures, and numerical simulations have demonstrated links between vortex tube dynamics and magnetic field organization and have shown the importance of vortex tube interactions in the mechanisms of acoustic wave excitation on the Sun. In this paper we investigate the mechanisms of the formation of vortex tubes in highly-turbulent convective flows near the solar surface by using realistic radiative hydrodynamic LES simulations. Analysis of data from the simulations indicates two basic processes of vortex tube formation: 1) development of small-scale convective instability inside convective granules, and 2) a Kelvin-Helmholtz type instability of shearing flows in intergranular lanes. Our analysis shows that vortex stretching during these processes is a primary source of generation of small-scale vorticity on the Sun.
△ Less
Submitted 11 January, 2012; v1 submitted 27 December, 2011;
originally announced December 2011.
-
Large-Eddy Simulation of an over-expanded planar nozzle
Authors:
Britton J. Olson,
Sanjiva K. Lele
Abstract:
This fluid dynamics video shows visualizations of a Large-Eddy Simulation (LES) of an over-expanded planar nozzle. This configuration represents the experimental setup of Papamoschou et. al. which found the position of the internal shock to be unstable. Our LES calculations confirm this instability and offer a vibrant and dynamic view of the underlying flow physics. The interaction between shock a…
▽ More
This fluid dynamics video shows visualizations of a Large-Eddy Simulation (LES) of an over-expanded planar nozzle. This configuration represents the experimental setup of Papamoschou et. al. which found the position of the internal shock to be unstable. Our LES calculations confirm this instability and offer a vibrant and dynamic view of the underlying flow physics. The interaction between shock and turbulent boundary layer is shown as is the subsequent separation region downstream. Numerical Schlieren provide a glimpse of the low frequency shock motion and suggest potential mechanisms for the instability. Key features include the asymmetry of the shock structure (with large and small lambda shocks), compression and expansion waves downstream of the shock and large scale flow reversal. Full details of the experiment and the calculation can be found in the references.
△ Less
Submitted 13 October, 2011;
originally announced October 2011.