-
Simulation Study of Photon-to-Digital Converter (PDC) Timing Specifications for LoLX Experiment
Authors:
Nguyen V. H. Viet,
Alaa Al Masri,
Masaharu Nomachi,
Marc-Andre Tétrault,
Soud Al Kharusi,
Thomas Brunner,
Christopher Chambers,
Bindiya Chana,
Austin de St. Croix,
Eamon Egan,
Marco Francesconi,
David Gallacher,
Luca Galli,
Pietro Giampa,
Damian Goeldi,
Jessee Lefebvre,
Chloe Malbrunot,
Peter Margetak,
Juliette Martin,
Thomas McElroy,
Mayur Patel,
Bernadette Rebeiro,
Fabrice Retiere,
El Mehdi Rtimi,
Lisa Rudolph
, et al. (2 additional authors not shown)
Abstract:
The Light only Liquid Xenon (LoLX) experiment is a prototype detector aimed to study liquid xenon (LXe) light properties and various photodetection technologies. LoLX is also aimed to quantify LXe's time resolution as a potential scintillator for 10~ps time-of-flight (TOF) PET. Another key goal of LoLX is to perform a time-based separation of Cerenkov and scintillation photons for new background r…
▽ More
The Light only Liquid Xenon (LoLX) experiment is a prototype detector aimed to study liquid xenon (LXe) light properties and various photodetection technologies. LoLX is also aimed to quantify LXe's time resolution as a potential scintillator for 10~ps time-of-flight (TOF) PET. Another key goal of LoLX is to perform a time-based separation of Cerenkov and scintillation photons for new background rejection methods in LXe experiments. To achieve this separation, LoLX is set to be equipped with photon-to-digital converters (PDCs), a photosensor type that provides a timestamp for each observed photon. To guide the PDC design, we explore requirements for time-based Cerenkov separation. We use a PDC simulator, whose input is the light information from the Geant4-based LoLX simulation model, and evaluate the separation quality against time-to-digital converter (TDC) parameters. Simulation results with TDC parameters offer possible configurations supporting a good separation. Compared with the current filter-based approach, simulations show Cerenkov separation level increases from 54% to 71% when using PDC and time-based separation. With the current photon time profile of LoLX simulation, the results also show 71% separation is achievable with just 4 TDCs per PDC. These simulation results will lead to a specification guide for the PDC as well as expected results to compare against future PDC-based experimental measurements. In the longer term, the overall LoLX results will assist large LXe-based experiments and motivate the assembly of a LXe-based TOF-PET demonstrator system.
△ Less
Submitted 28 October, 2023;
originally announced October 2023.
-
High-Temperature Superconductor Quantum Flux Parametron for Energy-Efficient Logic
Authors:
Han Cai,
Jay C. LeFebvre,
Hao Li,
Ethan Y. Cho,
Nobuyuki Yoshikawa,
Shane A. Cybart
Abstract:
As we rapidly advance through the information age, the power consumed by computers, data centers, and networks grows exponentially. This has inspired a race to develop alternative low-power computational technologies. A new adiabatic configuration of a decades-old superconducting digital logic device has darted into the lead called quantum flux parametrons (QFP). QFP operate with dissipation so lo…
▽ More
As we rapidly advance through the information age, the power consumed by computers, data centers, and networks grows exponentially. This has inspired a race to develop alternative low-power computational technologies. A new adiabatic configuration of a decades-old superconducting digital logic device has darted into the lead called quantum flux parametrons (QFP). QFP operate with dissipation so low that they seemingly violate the laws of thermodynamics. In just a short span of time, they have gone from simple single NOT gates to complex processors containing thousands of gates. They are fabricated from elemental niobium superconductors cooled to just a few degrees above absolute zero. However, their efficiency is so great that for large high-performance computers with several gates, the energy savings are immense. For smaller computational platforms QFPs from high-temperature superconductors (high-Tc) are highly desirable. In this work, we take the first steps towards this goal with the demonstration of a high-T C QFP shift register. Our device is fabricated using focused helium ion beam lithography where the material is modified with an ion beam at the nanoscale to directly pattern these circuits into a high-T C thin film. We validate the correct logical operation at 25 K, over 6 times higher than niobium devices with an estimated bit energy of 0.1 attoJoule at 10 GHz.
△ Less
Submitted 23 May, 2023;
originally announced May 2023.
-
Hot electron heatsinks for microwave attenuators below 100 mK
Authors:
Jen-Hao Yeh,
Rui Zhang,
Shavindra Premaratne,
Jay LeFebvre,
F. C. Wellstood,
B. S. Palmer
Abstract:
We demonstrate improvements to the cooling power of broad bandwidth (10 GHz) microwave attenuators designed for operation at temperatures below 100 mK. By interleaving 9-$μ$m thick conducting copper heatsinks in between 10-$μ$m long, 70-nm thick resistive nichrome elements, the electrical heat generated in the nichrome elements is conducted more readily into the heatsinks, effectively decreasing t…
▽ More
We demonstrate improvements to the cooling power of broad bandwidth (10 GHz) microwave attenuators designed for operation at temperatures below 100 mK. By interleaving 9-$μ$m thick conducting copper heatsinks in between 10-$μ$m long, 70-nm thick resistive nichrome elements, the electrical heat generated in the nichrome elements is conducted more readily into the heatsinks, effectively decreasing the thermal resistance between the hot electrons and cold phonons. For a 20 dB attenuator mounted at 20 mK, a minimum noise temperature of $T_{n} \sim$ 50 mK was obtained for small dissipated powers ($P_d <$ 1 nW) in the attenuator. For higher dissipated powers we find $T_n \propto P_{d}^{(1/4.4)}$, with $P_{d} =$ 100 nW corresponding to a noise temperature of 90 mK. This is in good agreement with thermal modeling of the system and represents nearly a factor of 20 improvement in cooling power, or a factor of 1.8 reduction in $T_n$ for the same dissipated power, when compared to a previous design without interleaved heatsinks.
△ Less
Submitted 17 October, 2018;
originally announced October 2018.
-
Microwave attenuators for use with quantum devices below 100 mK
Authors:
Jen-Hao Yeh,
Jay LeFebvre,
Shavindra Premaratne,
F. C. Wellstood,
B. S. Palmer
Abstract:
To reduce the level of thermally generated electrical noise transmitted to superconducting quantum devices operating at 20 mK, we have developed thin-film microwave power attenuators operating from 1 to 10 GHz. The 20 dB and 30 dB attenuators are built on a quartz substrate and use 75 nm thick films of nichrome for dissipative components and 0.001 mm thick silver films as hot electron heat sinks.…
▽ More
To reduce the level of thermally generated electrical noise transmitted to superconducting quantum devices operating at 20 mK, we have developed thin-film microwave power attenuators operating from 1 to 10 GHz. The 20 dB and 30 dB attenuators are built on a quartz substrate and use 75 nm thick films of nichrome for dissipative components and 0.001 mm thick silver films as hot electron heat sinks. The noise temperature of the attenuators was quantified by connecting the output to a 3D cavity containing a transmon qubit and extracting the dephasing rate of the qubit as a function of temperature and dissipated power P_d in the attenuator. The minimum noise temperature T_n of the output from the 20 dB attenuator was T_n less than and equal to 53 mK for no additional applied power and T_n about 120 mK when dissipating 30 nW. In the limit of large dissipated power (P_d > 1 nW) we find T_n proportional to P_d^(1/5.4), consistent with detailed thermal modeling of heat flow in the attenuators.
△ Less
Submitted 9 June, 2017; v1 submitted 3 March, 2017;
originally announced March 2017.
-
Distorted Born Diffraction Tomography: limits and applications to inverse the ultrasonic field scattered by an non-circular infinite elastic tube
Authors:
Philippe Lasaygues,
Régine Guillermin,
Jean-Pierre Lefebvre
Abstract:
This study focuses on the application of ultra sonic diffrac tion tomography to noncircular 2D-cylindri - cal ob jects im mersed in an in fi nite fluid. The dis torted Born it er a tive method used to solve the in verse scat ter ing prob lem be longs to the class of al ge braic re con struc tion al go rithms. This method was de vel - oped to in crease the or der of ap pli ca tion of the Born ap…
▽ More
This study focuses on the application of ultra sonic diffrac tion tomography to noncircular 2D-cylindri - cal ob jects im mersed in an in fi nite fluid. The dis torted Born it er a tive method used to solve the in verse scat ter ing prob lem be longs to the class of al ge braic re con struc tion al go rithms. This method was de vel - oped to in crease the or der of ap pli ca tion of the Born ap prox i ma tion (in the case of weakly-con trasted me dia) to higher or ders. This yields quan ti ta tive in for ma tion about the scat terer, such as the speed of sound and the at ten u a tion. Quan ti ta tive ul tra sonic im ag ing tech niques of this kind are of great po ten tial value in fields such as med i cine, un der wa ter acous tics and non de struc tive test ing.
△ Less
Submitted 16 December, 2009;
originally announced December 2009.