Showing 1–42 of 42 results for author: Lee, Y H

Organic molecules as origin of visible-range single photon emission from hexagonal boron nitride and mica

Authors: Michael Neumann, Xu Wei, Luis Morales-Inostroza, Seunghyun Song, Sung-Gyu Lee, Kenji Watanabe, Takashi Taniguchi, Stephan Götzinger, Young Hee Lee

Abstract: The discovery of room-temperature single-photon emitters (SPEs) hosted by two-dimensional hexagonal boron nitride (2D hBN) has sparked intense research interest. Although emitters in the vicinity of 2 eV have been studied extensively, their microscopic identity has remained elusive. The discussion of this class of SPEs has centered on point defects in the hBN crystal lattice, but none of the candi… ▽ More The discovery of room-temperature single-photon emitters (SPEs) hosted by two-dimensional hexagonal boron nitride (2D hBN) has sparked intense research interest. Although emitters in the vicinity of 2 eV have been studied extensively, their microscopic identity has remained elusive. The discussion of this class of SPEs has centered on point defects in the hBN crystal lattice, but none of the candidate defect structures have been able to capture the great heterogeneity in emitter properties that is observed experimentally. Employing a widely used sample preparation protocol but disentangling several confounding factors, we demonstrate conclusively that heterogeneous single-photon emission ~2 eV associated with hBN originates from organic molecules, presumably aromatic fluorophores. The appearance of those SPEs depends critically on the presence of organic processing residues during sample preparation, and emitters formed during heat treatment are not located within the hBN crystal as previously thought, but at the hBN/substrate interface. We further demonstrate that the same class of SPEs can be observed in a different 2D insulator, fluorophlogopite mica. △ Less

Submitted 21 June, 2023; originally announced June 2023.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in ACS Nano, copyright © 2023 American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acsnano.3c02348

Evaluating the Reliability of Air Temperature from ERA5 Reanalysis Data

Authors: Barry McNicholl, Yee Hui Lee, Abraham G. Campbell, Soumyabrata Dev

Abstract: The reliability of ERA5 satellite-based air temperature data is under investigation in this paper. To evaluate this, the ERA5 data will be compared with land-based data obtained from weather stations on the Global Historical Climatology Network. Two climate regions are taken into consideration, temperate and tropical. Five years' worth of data is collected and compared through box plots, regressio… ▽ More The reliability of ERA5 satellite-based air temperature data is under investigation in this paper. To evaluate this, the ERA5 data will be compared with land-based data obtained from weather stations on the Global Historical Climatology Network. Two climate regions are taken into consideration, temperate and tropical. Five years' worth of data is collected and compared through box plots, regression models and statistical metrics. The results show that the satellite temperature performs better in the temperate region than the tropical region. This suggests that the time of year and climate region have an impact on the accuracy of the satellite data as milder temperatures produce better approximations. △ Less

Submitted 22 April, 2022; originally announced April 2022.

Comments: Published in IEEE Geoscience and Remote Sensing Letters, 2021

Air Quality in the New Delhi Metropolis under COVID-19 Lockdown

Authors: Dewansh Kaloni, Yee Hui Lee, Soumyabrata Dev

Abstract: Air pollution has been on continuous rise with increase in industrialization in metropolitan cities of the world. Several measures including strict climate laws and reduction in the number of vehicles were implemented by several nations. The COVID-19 pandemic provided a great opportunity to understand the daily human activities effect on air pollution. Majority nations restricted industrial activi… ▽ More Air pollution has been on continuous rise with increase in industrialization in metropolitan cities of the world. Several measures including strict climate laws and reduction in the number of vehicles were implemented by several nations. The COVID-19 pandemic provided a great opportunity to understand the daily human activities effect on air pollution. Majority nations restricted industrial activities and vehicular traffic to a large extent as a measure to restrict COVID-19 spread. In this paper, we analyzed the impact of such COVID19-induced lockdown on the air quality of the city of New Delhi, India. We analyzed the average concentration of common gaseous pollutants viz. sulfur dioxide (SO$_2$), ozone (O$_3$), nitrogen dioxide (NO$_2$), and carbon monoxide (CO). These concentrations were obtained from the tropospheric column of Sentinel-5P (an earth observation satellite of European Space Agency) data. We observed that the city observed a significant drop in the level of atmospheric pollutant's concentration for all the major pollutants as a result of strict lockdown measures. Such findings are also validated with pollutant data obtained from ground-based monitoring stations. We observed that near-surface pollutant concentration dropped significantly by 50% for PM$_{2.5}$, 71.9% for NO$_2$, and 88% for CO, after the lockdown period. Such studies would pave the path for implementing future air pollution control measures by environmentalists. △ Less

Submitted 4 March, 2022; originally announced March 2022.

Comments: Published in Systems and Soft Computing 2022

Monitoring Atmospheric Pollutants From Ground-based Observations

Authors: Nicholas Danesi, Mayank Jain, Yee Hui Lee, Soumyabrata Dev

Abstract: Remote sensing analysts continuously monitor the amount of pollutants in the atmosphere. They are usually performed via satellite images. However, these images suffer from low temporal and low spatial resolution. Therefore, observations recorded from the ground offer us a fantastic alternative. There are low-cost sensors that continuously record the PM$_{2.5}$ and PM$_{10}$ concentration levels in… ▽ More Remote sensing analysts continuously monitor the amount of pollutants in the atmosphere. They are usually performed via satellite images. However, these images suffer from low temporal and low spatial resolution. Therefore, observations recorded from the ground offer us a fantastic alternative. There are low-cost sensors that continuously record the PM$_{2.5}$ and PM$_{10}$ concentration levels in the atmosphere. In this position paper, we provide an overview of the state-of-the-art techniques for pollutant forecasting. We establish the interdependence of meteorological parameters on atmospheric pollutants. Our case study in this paper is based on the island of Australia. △ Less

Submitted 21 October, 2021; originally announced November 2021.

Comments: Accepted in Proc. IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2021

Predicting spin orbit coupling effect in the electronic and magnetic properties of cobalt (Co) doped WSe2 monolayer

Authors: Dinesh Thapa, Dinh Loc Duong, Seok Joon Yun, Santosh KC, Young Hee Lee, Seong-Gon Kim

Abstract: The electronic and magnetic properties of cobalt (Co) doped monolayer (ML) tungsten diselenide (WSe2) are investigated using the density functional theory with the on-site Hubbard potential correction (DFT+U) for the localized d orbitals of Co atom taking into account the spin orbit coupling (SOC) interaction. The results show that the substitution of Co at the W sites of ML WSe2 is energetically… ▽ More The electronic and magnetic properties of cobalt (Co) doped monolayer (ML) tungsten diselenide (WSe2) are investigated using the density functional theory with the on-site Hubbard potential correction (DFT+U) for the localized d orbitals of Co atom taking into account the spin orbit coupling (SOC) interaction. The results show that the substitution of Co at the W sites of ML WSe2 is energetically favorable under Se rich environment. We noticed that the Hund's exchange splitting (ΔH_{ex}) is dominant over the crystal field splitting (Δ_{cf}). The induced magnetic moment due to the Co-doped defect is ~3.00 μ_B per Co atom. The magnetic interaction between two Co atoms at the nearest neighbor separation depends mainly on the concentration of the impurity atoms. The calculated value of curie temperature (TC) is increasing with increasing impurity concentration satisfying the Zener model. Based on the results, it can be proposed that the Co-doped WSe2 monolayer is potential candidate to apply in spintronics, optoelectronics, and magnetic storage devices. △ Less

Submitted 3 November, 2021; v1 submitted 27 October, 2021; originally announced October 2021.

Day-ahead Forecasts of Air Temperature

Authors: Hewei Wang, Muhammad Salman Pathan, Yee Hui Lee, Soumyabrata Dev

Abstract: Air temperature is an essential factor that directly impacts the weather. Temperature can be counted as an important sign of climatic change, that profoundly impacts our health, development, and urban planning. Therefore, it is vital to design a framework that can accurately predict the temperature values for considerable lead times. In this paper, we propose a technique based on exponential smoot… ▽ More Air temperature is an essential factor that directly impacts the weather. Temperature can be counted as an important sign of climatic change, that profoundly impacts our health, development, and urban planning. Therefore, it is vital to design a framework that can accurately predict the temperature values for considerable lead times. In this paper, we propose a technique based on exponential smoothing method to accurately predict temperature using historical values. Our proposed method shows good performance in capturing the seasonal variability of temperature. We report a root mean square error of $4.62$ K for a lead time of $3$ days, using daily averages of air temperature data. Our case study is based on weather stations located in the city of Alpena, Michigan, United States. △ Less

Submitted 21 October, 2021; originally announced October 2021.

Comments: Accepted in Proc. IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2021

Analyzing the Impact of Meteorological Parameters on Rainfall Prediction

Authors: Muhammad Salman Pathan, Jiantao Wu, Yee Hui Lee, Jianzhuo Yan, Soumyabrata Dev

Abstract: Rainfall is a climatic factor that affects many human activities like agriculture, construction, and forestry. Rainfall is dependent on various meteorological features and its prediction is a very complex task due to the dynamic climatic nature. A detailed study of different climatic features associated with the occurrence of rainfall should be made in order to understand the influence of each par… ▽ More Rainfall is a climatic factor that affects many human activities like agriculture, construction, and forestry. Rainfall is dependent on various meteorological features and its prediction is a very complex task due to the dynamic climatic nature. A detailed study of different climatic features associated with the occurrence of rainfall should be made in order to understand the influence of each parameter in the context of rainfall. In this paper, we propose a methodical approach to analyze the affect of various parameters on rainfall. Our study uses $5$ years of meteorological data from a weather station located in the United States. The correlation and interdependence among the collected meteorological features were obtained. Additionally, we identified the most important meteorological features for rainfall prediction using a machine learning-based feature selection technique. △ Less

Submitted 21 October, 2021; originally announced October 2021.

Comments: Accepted in Proc. IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2021

Spin-orbit torque: Moving towards two-dimensional van der Waals heterostructures

Authors: R. C. Sahoo, Dinh Loc Duong, Jungbum Yoon, Pham Nam Hai, Young Hee Lee

Abstract: The manipulation of magnetic properties using either electrical currents or gate bias is the key of future high-impact nanospintronics applications such as spin-valve read heads, non-volatile logic, and random-access memories. The current technology for magnetic switching with spin-transfer torque requires high current densities, whereas gate-tunable magnetic materials such as ferromagnetic semico… ▽ More The manipulation of magnetic properties using either electrical currents or gate bias is the key of future high-impact nanospintronics applications such as spin-valve read heads, non-volatile logic, and random-access memories. The current technology for magnetic switching with spin-transfer torque requires high current densities, whereas gate-tunable magnetic materials such as ferromagnetic semiconductors and multiferroic materials are still far from practical applications. Recently, magnetic switching induced by pure spin currents using the spin Hall and Rashba effects in heavy metals, called spin-orbit torque (SOT), has emerged as a candidate for designing next-generation magnetic memory with low current densities. The recent discovery of topological materials and two-dimensional (2D) van der Waals (vdW) materials provides opportunities to explore versatile 3D-2D and 2D-2D heterostructures with interesting characteristics. In this review, we introduce the emerging approaches to realizing SOT nanodevices including techniques to evaluate the SOT efficiency as well as the opportunities and challenges of using 2D topological materials and vdW materials in such applications. △ Less

Submitted 24 August, 2021; originally announced August 2021.

Impact of COVID19-induced Lockdown on Air Quality in Ireland

Authors: Dewansh Kaloni, Yee Hui Lee, Soumyabrata Dev

Abstract: Air pollution has been a long-existing problem for most of the major metropolitan cities of the world. Several measures including strict climate laws and reduction in the number of vehicles were implemented by several nations. However, in the recent wake of the COVID19 pandemic, there has been a renewed interest in revisiting the problem of low air quality. Several countries implemented strict loc… ▽ More Air pollution has been a long-existing problem for most of the major metropolitan cities of the world. Several measures including strict climate laws and reduction in the number of vehicles were implemented by several nations. However, in the recent wake of the COVID19 pandemic, there has been a renewed interest in revisiting the problem of low air quality. Several countries implemented strict lockdown measures halting the vehicular traffic and other economic activities, in order to reduce the spread of COVID19. In this paper, we analyze the impact of such COVID19-induced lockdown on the air quality of the atmosphere. Our case study is based in the city of Dublin, Ireland. We analyze the average concentration of common gaseous pollutant majorly responsible for industrial and vehicular pollution, \textit{viz.} nitrogen dioxide (NO$_2$). These concentrations are obtained from the tropospheric column of the atmosphere collected by Sentinel-5P, which is an earth observation satellite of European Space Agency. We observe that Dublin had a significant drop in the level of NO$_2$ concentration, owing to the strict lockdown measures implemented across the nation. △ Less

Submitted 5 June, 2021; originally announced July 2021.

Comments: Published in IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2021

Color of Copper/Copper oxide

Authors: Su Jae Kim, Seonghoon Kim, Jegon Lee, Youngjae Jo, Yu-Seong Seo, Myounghoon Lee, Yousil Lee, Chae Ryong Cho, Jong-pil Kim, Miyeon Cheon, Jungseek Hwang, Yong In Kim, Young-Hoon Kim, Young-Min Kim, Aloysius Soon, Myunghwan Choi, Woo Seok Choi, Se-Young Jeong, Young Hee Lee

Abstract: Stochastic inhomogeneous oxidation is an inherent characteristic of copper (Cu), often hindering color tuning and bandgap engineering of oxides. Coherent control of the interface between metal and metal oxide remains unresolved. We demonstrate coherent propagation of an oxidation front in single-crystal Cu thin film to achieve a full-color spectrum for Cu by precisely controlling its oxide-layer t… ▽ More Stochastic inhomogeneous oxidation is an inherent characteristic of copper (Cu), often hindering color tuning and bandgap engineering of oxides. Coherent control of the interface between metal and metal oxide remains unresolved. We demonstrate coherent propagation of an oxidation front in single-crystal Cu thin film to achieve a full-color spectrum for Cu by precisely controlling its oxide-layer thickness. Grain boundary-free and atomically flat films prepared by atomic-sputtering epitaxy allow tailoring of the oxide layer with an abrupt interface via heat treatment with a suppressed temperature gradient. Color tuning of nearly full-color RGB indices is realized by precise control of oxide-layer thickness; our samples covered ~50.4% of the sRGB color space. The color of copper/copper oxide is realized by the reconstruction of the quantitative yield color from oxide pigment (complex dielectric functions of Cu2O) and light-layer interference (reflectance spectra obtained from the Fresnel equations) to produce structural color. We further demonstrate laser-oxide lithography with micron-scale linewidth and depth through local phase transformation to oxides embedded in the metal, providing spacing necessary for semiconducting transport and optoelectronics functionality. △ Less

Submitted 15 July, 2021; originally announced July 2021.

Comments: 38 pages

Journal ref: Advanced Materials 33 (2021) 2007345

Sub-bandgap activated charges transfer in a graphene-MoS2-graphene heterostructure

Authors: Sunil Kumar, Arvind Singh, Anand Nivedan, Sandeep Kumar, Seok Joon Yun, Young Hee Lee, Marc Tondusson, Jérôme Degert, Jean Oberle, Eric Freysz

Abstract: Monolayers of transition metal dichalcogenides are semiconducting materials which offer many prospects in optoelectronics. A monolayer of molybdenum disulfide (MoS2) has a direct bandgap of 1.88 eV. Hence, when excited with optical photon energies below its bandgap, no photocarriers are generated and a monolayer of MoS2 is not of much use in either photovoltaics or photodetection. Here, we demonst… ▽ More Monolayers of transition metal dichalcogenides are semiconducting materials which offer many prospects in optoelectronics. A monolayer of molybdenum disulfide (MoS2) has a direct bandgap of 1.88 eV. Hence, when excited with optical photon energies below its bandgap, no photocarriers are generated and a monolayer of MoS2 is not of much use in either photovoltaics or photodetection. Here, we demonstrate that large size MoS2 monolayer sandwiched between two graphene layers makes this heterostructure optically active well below the band gap of MoS2. An ultrafast optical pump-THz probe experiment reveals in real-time, transfer of carriers between graphene and MoS2 monolayer upon photoexcitation with photon energies down to 0.5 eV. It also helps to unravel an unprecedented enhancement in the broadband transient THz response of this tri-layer material system. We propose possible mechanism which can account for this phenomenon. Such specially designed heterostructures, which can be easily built around different transition metal dichalcogenide monolayers, will considerably broaden the scope for modern optoelectronic applications at THz bandwidth. △ Less

Submitted 20 March, 2021; originally announced March 2021.

Comments: Manuscript with supplementary information

Journal ref: Nano Select (2021)

Enhancement in optically induced ultrafast THz response of MoSe2MoS2 heterobilayer

Authors: Sunil Kumar, Arvind Singh, Sandeep Kumar, Anand Nivedan, Marc Tondusson, Jerome Degert, Jean Oberle, Seok Joon Yun, Young Hee Lee, Eric Freysz

Abstract: THz conductivity of large area MoS2 and MoSe2 monolayers as well as their vertical heterostructure, MoSe2MoS2 is measured in the 0.3-5 THz frequency range. Compared to the monolayers, the ultrafast THz reflectivity of the MoSe2MoS2 heterobilayer is enhanced many folds when optically excited above the direct band gap energies of the constituting monolayers. The free carriers generated in the hetero… ▽ More THz conductivity of large area MoS2 and MoSe2 monolayers as well as their vertical heterostructure, MoSe2MoS2 is measured in the 0.3-5 THz frequency range. Compared to the monolayers, the ultrafast THz reflectivity of the MoSe2MoS2 heterobilayer is enhanced many folds when optically excited above the direct band gap energies of the constituting monolayers. The free carriers generated in the heterobilayer evolve with the characteristic times found in each of the two monolayers. Surprisingly, the same enhancement is recorded in the ultrafst THz reflectivity of the heterobilayer when excited below the MoS2 bandgap energy. A mechanism accounting for these observations is proposed. △ Less

Submitted 18 December, 2020; originally announced December 2020.

Comments: Contains Supplementary Information also

Journal ref: Optics Express (2021)

Characterization of magnetic field noise in the ARIADNE source mass rotor

Authors: Nancy Aggarwal, Allard Schnabel, Jens Voigt, Alex Brown, Josh C Long, L. Trahms, A. Fang, Andrew Geraci, A. Kapitulnik, D. Kim, Y. Kim, I. Lee, Y. H. Lee, C. Y. Liu, C. Lohmeyer, A. Reid, Y. Semertzidis, Y. Shin, J. Shortino, E. Smith, W. M. Snow, E. Weisman

Abstract: ARIADNE is a nuclear-magnetic-resonance-based experiment that will search for novel axion-induced spin-dependent interactions between an unpolarized source mass rotor and a nearby sample of spin-polarized $^3$He gas. To detect feeble axion signals at the sub-atto-Tesla level, the experiment relies on low magnetic background and noise. We measure and characterize the magnetic field background from… ▽ More ARIADNE is a nuclear-magnetic-resonance-based experiment that will search for novel axion-induced spin-dependent interactions between an unpolarized source mass rotor and a nearby sample of spin-polarized $^3$He gas. To detect feeble axion signals at the sub-atto-Tesla level, the experiment relies on low magnetic background and noise. We measure and characterize the magnetic field background from a prototype tungsten rotor. We show that the requirement is met with our current level of tungsten purity and demagnetization process. We further show that the noise is dominantly caused by a few discrete dipoles, likely due to a few impurities trapped inside the rotor during manufacturing. This is done via a numerical optimization pipeline which fits for the locations and magnetic moments of each dipole. We find that under the current demagnetization, the magnetic moment of trapped impurities is bounded at $10^{-9} \mathrm{A}\mathrm{m}^2$. △ Less

Submitted 25 November, 2020; originally announced November 2020.

Comments: 6 pages, 5 figures

Source mass characterization in the ARIADNE axion experiment

Authors: Chloe Lohmeyer, Nancy Aggarwal, Asimina Arvanitaki, Alex Brown, Alan Fang, Andrew A Geraci, Aharon Kapitulnik, Dongok Kim, Younggeun Kim, Inbum Lee, Yong Ho Lee, Eli Levenson-Falk, Chen Yu Liu, Josh C Long, Sam Mumford, Austin Reid, Allard Schnabel, Yannis Semertzidis, Yun Shin, Justin Shortino, Eric Smith, William M Snow, Lutz Trahms, Jens Voigt, Evan Weisman

Abstract: The Axion Resonant InterAction Detection Experiment (ARIADNE) is a collaborative effort to search for the QCD axion using nuclear magnetic resonance (NMR), where the axion acts as a mediator of spin-dependent forces between an unpolarized tungsten source mass and a sample of polarized helium-3 gas. Since the experiment involves precision measurement of a small magnetization, it relies on limiting… ▽ More The Axion Resonant InterAction Detection Experiment (ARIADNE) is a collaborative effort to search for the QCD axion using nuclear magnetic resonance (NMR), where the axion acts as a mediator of spin-dependent forces between an unpolarized tungsten source mass and a sample of polarized helium-3 gas. Since the experiment involves precision measurement of a small magnetization, it relies on limiting ordinary magnetic noise with superconducting magnetic shielding. In addition to the shielding, proper characterization of the noise level from other sources is crucial. We investigate one such noise source in detail: the magnetic noise due to impurities and Johnson noise in the tungsten source mass. △ Less

Submitted 19 November, 2020; originally announced November 2020.

Comments: ARIADNE Collaboration

Journal ref: Proceedings of the 3rd International Workshop on Microwave Cavities and Detectors for Axion Research 2020

Carrier Multiplication via Photocurrent Measurements in Dual-Gated MoTe_2

Authors: Jun Suk Kim, Minh Dao Tran, Sung-Tae Kim, Daehan Yoo, Sang-Hyun Oh, Ji-Hee Kim, Young Hee Lee

Abstract: Although van der Waals layered transition metal dichalcogenides from transient absorption spectroscopy have successfully demonstrated an ideal carrier multiplication (CM) performance with an onset of nearly 2Eg,interpretation of the CM effect from the optical approach remains unresolved owing to the complexity of many-body electron-hole pairs. We demonstrate the CM effect through simple photocurre… ▽ More Although van der Waals layered transition metal dichalcogenides from transient absorption spectroscopy have successfully demonstrated an ideal carrier multiplication (CM) performance with an onset of nearly 2Eg,interpretation of the CM effect from the optical approach remains unresolved owing to the complexity of many-body electron-hole pairs. We demonstrate the CM effect through simple photocurrent measurements by fabricating the dual-gate P-N junction of a MoTe2 film on a transparent substrate. Electrons and holes were efficiently extracted by eliminating the Schottky barriers in the metal contact and minimizing multiple reflections. The photocurrent was elevated proportionately to the excitation energy. The boosted quantum efficiency confirms the multiple electron-hole pair generation of >2Eg, consistent with CM results from an optical approach, pushing the solar cell efficiency beyond the Shockley-Queisser limit. △ Less

Submitted 26 October, 2020; originally announced October 2020.

Journal ref: Nano Letters 21, 1976 (2021)

Band restructuring of ordered/disordered blue TiO2 for visible photocatalyst

Authors: Simgeon Oh, Ji-Hee Kim, Hee Min Hwang, Doyoung Kim, Joosung Kim, G. Hwan Park, Joon Soo Kim, Young Hee Lee, Hyoyoung Lee

Abstract: Black TiO2 with/without noble metal has been proposed for visible photocatalyst, still leaving poor catalyst efficiency. Alternatively, phase-mixed TiO2 such as anatase and rutile has been commonly used for visible catalysts with the inevitable inclusion of noble metal. Here, we perform a noble metal-free visible photocatalyst blue TiO2 with type-II band-aligned ordered anatase/disordered rutile s… ▽ More Black TiO2 with/without noble metal has been proposed for visible photocatalyst, still leaving poor catalyst efficiency. Alternatively, phase-mixed TiO2 such as anatase and rutile has been commonly used for visible catalysts with the inevitable inclusion of noble metal. Here, we perform a noble metal-free visible photocatalyst blue TiO2 with type-II band-aligned ordered anatase/disordered rutile structure, via phase-selective reduction with alkali metals. The changed band alignment in this heterostructure was identified by absorption and ultraviolet photoemission spectroscopy, which was further confirmed by transient charge separation. The band alignment of type-I and type-II was clearly restructured by converting from ordered to disordered phase with a prolonged reduction period and as followed light absorbance enhancement also observed. Initiated type-I in a pristine sample, the type-II was organized from disordered rutile phase in 3-day Li-reduction. The type-II disordered rutile TiO2 heterostructure exhibits a remarkable photocatalytic performance by 55 times higher than conventional P25 TiO2 in solar-light driven hydrogen evolution reaction owing to an efficient electron and hole separation of type-II heterojunction. Furthermore, this restructured heterojunction type-II TiO2 demanded 10 times less Pt amount as a co-catalyst for the comparable photocatalytic performance, compared to Pt decorated type-I pristine anatase/rutile phase-mixed TiO2. △ Less

Submitted 19 October, 2020; originally announced October 2020.

Comments: 25 pages, 6 figures

Real-space imaging of acoustic plasmons in large-area CVD graphene

Authors: Sergey G. Menabde, In-Ho Lee, Sanghyub Lee, Heonhak Ha, Jacob T. Heiden, Daehan Yoo, Teun-Teun Kim, Young Hee Lee, Tony Low, Sang-Hyun Oh, Min Seok Jang

Abstract: An acoustic plasmonic mode in a graphene-dielectric-metal heterostructure has recently been spotlighted as a superior platform for strong light-matter interaction. It originates from the coupling of graphene plasmon with its mirror image and exhibits the largest field confinement in the limit of a nm-thick dielectric. Although recently detected in the far-field regime, optical near-fields of this… ▽ More An acoustic plasmonic mode in a graphene-dielectric-metal heterostructure has recently been spotlighted as a superior platform for strong light-matter interaction. It originates from the coupling of graphene plasmon with its mirror image and exhibits the largest field confinement in the limit of a nm-thick dielectric. Although recently detected in the far-field regime, optical near-fields of this mode are yet to be observed and characterized. Direct optical probing of the plasmonic fields reflected by the edges of graphene via near-field scattering microscope reveals a relatively small dam** rate of the mid-IR acoustic plasmons in our devices, which allows for their real-space map** even with unprotected, chemically grown, large-area graphene at ambient conditions. We show an acoustic mode that is twice as confined - yet 1.4 times less damped - compared to the graphene surface plasmon under similar conditions. We also image the resonant acoustic Bloch state in a 1D array of gold nanoribbons responsible for the high efficiency of the far-field coupling. Our results highlight the importance of acoustic plasmons as an exceptionally promising platform for large-area graphene-based optoelectronic devices operating in mid-IR. △ Less

Submitted 3 September, 2020; originally announced October 2020.

Journal ref: Nature Communications 12, 938 (2021)

Modulation Do** via a 2d Atomic Crystalline Acceptor

Authors: Yi** Wang, Jesse Balgley, Eli Gerber, Mason Gray, Narendra Kumar, Xiaobo Lu, Jia-Qiang Yan, Arash Fereidouni, Rabindra Basnet, Seok Joon Yun, Dhavala Suri, Hikari Kitadai, Takashi Taniguchi, Kenji Watanabe, Xi Ling, Jagadeesh Moodera, Young Hee Lee, Hugh O. H. Churchill, ** Hu, Li Yang, Eun-Ah Kim, David G. Mandrus, Erik A. Henriksen, Kenneth S. Burch

Abstract: Two-dimensional (2d) nano-electronics, plasmonics, and emergent phases require clean and local charge control, calling for layered, crystalline acceptors or donors. Our Raman, photovoltage, and electrical conductance measurements combined with \textit{ab initio} calculations establish the large work function and narrow bands of $α$-RuCl$_3$ enable modulation do** of exfoliated, chemical vapor de… ▽ More Two-dimensional (2d) nano-electronics, plasmonics, and emergent phases require clean and local charge control, calling for layered, crystalline acceptors or donors. Our Raman, photovoltage, and electrical conductance measurements combined with \textit{ab initio} calculations establish the large work function and narrow bands of $α$-RuCl$_3$ enable modulation do** of exfoliated, chemical vapor deposition (CVD), and molecular beam epitaxy (MBE) materials. Short-ranged lateral do** (${\leq}65\ \text{nm}$) and high homogeneity are achieved in proximate materials with a single layer of \arucl. This leads to the highest monolayer graphene (mlg) mobilities ($4,900\ \text{cm}^2/ \text{Vs}$) at these high hole densities ($3\times10^{13}\ \text{cm}^{-2}$); and yields larger charge transfer to bilayer graphene (blg) ($6\times10^{13}\ \text{cm}^{-2}$). We further demonstrate proof of principle optical sensing, control via twist angle, and charge transfer through hexagonal boron nitride (hBN). △ Less

Submitted 15 July, 2020; v1 submitted 13 July, 2020; originally announced July 2020.

Forecasting Precipitable Water Vapor Using LSTMs

Authors: Mayank Jain, Shilpa Manandhar, Yee Hui Lee, Stefan Winkler, Soumyabrata Dev

Abstract: Long-Short-Term-Memory (LSTM) networks have been used extensively for time series forecasting in recent years due to their ability of learning patterns over different periods of time. In this paper, this ability is applied to learning the pattern of Global Positioning System (GPS)-based Precipitable Water Vapor (PWV) measurements over a period of 4 hours. The trained model was evaluated on more th… ▽ More Long-Short-Term-Memory (LSTM) networks have been used extensively for time series forecasting in recent years due to their ability of learning patterns over different periods of time. In this paper, this ability is applied to learning the pattern of Global Positioning System (GPS)-based Precipitable Water Vapor (PWV) measurements over a period of 4 hours. The trained model was evaluated on more than 1500 hours of recorded data. It achieves a root mean square error (RMSE) of 0.098 mm for a forecasting interval of 5 minutes in the future, and outperforms the naive approach for a lead-time of up to 40 minutes. △ Less

Submitted 26 June, 2020; originally announced June 2020.

Comments: Published in Proc. IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2020

Evidence of itinerant holes for long-range magnetic order in tungsten diselenide semiconductor with vanadium dopants

Authors: Bumsub Song, Seok Joon Yun, **bao Jiang, Kory Beach, Wooseon Choi, Young-Min Kim, Humberto Terrones, Young Jae Song, Dinh Loc Duong, Young Hee Lee

Abstract: One primary concern in diluted magnetic semiconductors (DMSs) is how to establish a long-range magnetic order with a low magnetic do** concentration to maintain the gate tunability of the host semiconductor, as well as to increase Curie temperature. Two-dimensional van der Waals semiconductors have been recently investigated to demonstrate the magnetic order in DMSs; however, a comprehensive und… ▽ More One primary concern in diluted magnetic semiconductors (DMSs) is how to establish a long-range magnetic order with a low magnetic do** concentration to maintain the gate tunability of the host semiconductor, as well as to increase Curie temperature. Two-dimensional van der Waals semiconductors have been recently investigated to demonstrate the magnetic order in DMSs; however, a comprehensive understanding of the mechanism responsible for the gate-tunable long-range magnetic order in DMSs has not been achieved yet. Here, we introduce a monolayer tungsten diselenide (WSe2) semiconductor with V dopants to demonstrate the long-range magnetic order through itinerant spin-polarized holes. The V atoms are sparsely located in the host lattice by substituting W atoms, which is confirmed by scanning tunneling microscopy and high-resolution transmission electron microscopy. The V impurity states and the valence band edge states are overlapped, which is congruent with density functional theory calculations. The field-effect transistor characteristics reveal the itinerant holes within the hybridized band; this clearly resembles the Zener model. Our study gives an insight into the mechanism of the long-range magnetic order in V-doped WSe2, which can also be used for other magnetically doped semiconducting transition metal dichalcogenides. △ Less

Submitted 17 February, 2020; originally announced February 2020.

Comments: 19 pages, 4 figures

Journal ref: Phys. Rev. B 103, 094432 (2021)

Predicting Solar Irradiance in Singapore

Authors: T. A. Fathima, Vasudevan Nedumpozhimana, Yee Hui Lee, Stefan Winkler, Soumyabrata Dev

Abstract: Solar irradiance is the primary input for all solar energy generation systems. The amount of available solar radiation over time under the local weather conditions helps to decide the optimal location, technology and size of a solar energy project. We study the behaviour of incident solar irradiance on the earth's surface using weather sensors. In this paper, we propose a time-series based techniq… ▽ More Solar irradiance is the primary input for all solar energy generation systems. The amount of available solar radiation over time under the local weather conditions helps to decide the optimal location, technology and size of a solar energy project. We study the behaviour of incident solar irradiance on the earth's surface using weather sensors. In this paper, we propose a time-series based technique to forecast the solar irradiance values for shorter lead times of upto 15 minutes. Our experiments are conducted in the tropical region viz. Singapore, which receives a large amount of solar irradiance throughout the year. We benchmark our method with two common forecasting techniques, namely persistence model and average model, and we obtain good prediction performance. We report a root mean square of 147 W/m^2 for a lead time of 15 minutes. △ Less

Submitted 15 December, 2019; originally announced December 2019.

Comments: Published in Proc. Progress In Electromagnetics Research Symposium (PIERS), 2019

A Chaotic Approach on Solar Irradiance Forecasting

Authors: T. A. Fathima, Vasudevan Nedumpozhimana, Yee Hui Lee, Stefan Winkler, Soumyabrata Dev

Abstract: We analyse the time series of solar irradiance measurements using chaos theory. The False Nearest Neighbour method (FNN), one of the most common methods of chaotic analysis is used for the analysis. One year data from the weather station located at Nanyang Technological University (NTU) Singapore with a temporal resolution of $1$ minute is employed for the study. The data is sampled at $60$ minute… ▽ More We analyse the time series of solar irradiance measurements using chaos theory. The False Nearest Neighbour method (FNN), one of the most common methods of chaotic analysis is used for the analysis. One year data from the weather station located at Nanyang Technological University (NTU) Singapore with a temporal resolution of $1$ minute is employed for the study. The data is sampled at $60$ minutes interval and $30$ minutes interval for the analysis using the FNN method. Our experiments revealed that the optimum dimension required for solar irradiance is $4$ for both samplings. This indicates that a minimum of $4$ dimensions is required for embedding the data for the best representation of input. This study on obtaining the embedding dimension of solar irradiance measurement will greatly assist in fixing the number of previous data required for solar irradiance forecasting. △ Less

Submitted 15 December, 2019; originally announced December 2019.

Comments: Published in Proc. Progress In Electromagnetics Research Symposium (PIERS), 2019

A Data-Driven Approach for Accurate Rainfall Prediction

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng, Stefan Winkler

Abstract: In recent years, there has been growing interest in using Precipitable Water Vapor (PWV) derived from Global Positioning System (GPS) signal delays to predict rainfall. However, the occurrence of rainfall is dependent on a myriad of atmospheric parameters. This paper proposes a systematic approach to analyze various parameters that affect precipitation in the atmosphere. Different ground-based wea… ▽ More In recent years, there has been growing interest in using Precipitable Water Vapor (PWV) derived from Global Positioning System (GPS) signal delays to predict rainfall. However, the occurrence of rainfall is dependent on a myriad of atmospheric parameters. This paper proposes a systematic approach to analyze various parameters that affect precipitation in the atmosphere. Different ground-based weather features like Temperature, Relative Humidity, Dew Point, Solar Radiation, PWV along with Seasonal and Diurnal variables are identified, and a detailed feature correlation study is presented. While all features play a significant role in rainfall classification, only a few of them, such as PWV, Solar Radiation, Seasonal and Diurnal features, stand out for rainfall prediction. Based on these findings, an optimum set of features are used in a data-driven machine learning algorithm for rainfall prediction. The experimental evaluation using a four-year (2012-2015) database shows a true detection rate of 80.4%, a false alarm rate of 20.3%, and an overall accuracy of 79.6%. Compared to the existing literature, our method significantly reduces the false alarm rates. △ Less

Submitted 10 July, 2019; originally announced July 2019.

Comments: Published in IEEE Transactions on Geoscience and Remote Sensing, 2019

Probing plasmon-NV$^0$ coupling at the nanometer scale with photons and fast electrons

Authors: H. Lourenço-Martins, M. Kociak, S. Meuret, F. Treussart, Yih Hong Lee, Xing Yi Ling, H. C. Chang, L. H. G. Tizei

Abstract: The local density of optical states governs an emitters lifetime and quantum yield through the Purcell effect. It can be modified by a surface plasmon electromagnetic field, but such a field has a spatial extension limited to a few hundreds of nanometers, which complicates the use of optical methods to spatially probe the emitter-plasmon coupling. Here we show that a combination of electron-based… ▽ More The local density of optical states governs an emitters lifetime and quantum yield through the Purcell effect. It can be modified by a surface plasmon electromagnetic field, but such a field has a spatial extension limited to a few hundreds of nanometers, which complicates the use of optical methods to spatially probe the emitter-plasmon coupling. Here we show that a combination of electron-based imaging, spectroscopies and photon-based correlation spectroscopy enables measurement of the Purcell effect with nanometer and nanosecond spatio-temporal resolutions. Due to the large variability of radiative lifetimes of emitters embedded in nanoparticles with inhomogeneous sizes we relied on a statistical approach to unambiguously probe the coupling between nitrogen-vacancy centers (NV^0) in nanodiamonds and surface plasmons in silver nanocubes. We quantified the Purcell effect by measuring the NV^0 excited state lifetimes in a large number of either isolated nanodiamonds or nanodiamond-nanocube dimers and demonstrated a statistically significant lifetime reduction for dimers. △ Less

Submitted 2 June, 2019; originally announced June 2019.

Journal ref: Hugo Lourenco-Martins, et al, ACS Photonics, 5, 324 (2018)

CloudSegNet: A Deep Network for Nychthemeron Cloud Image Segmentation

Authors: Soumyabrata Dev, Atul Nautiyal, Yee Hui Lee, Stefan Winkler

Abstract: We analyze clouds in the earth's atmosphere using ground-based sky cameras. An accurate segmentation of clouds in the captured sky/cloud image is difficult, owing to the fuzzy boundaries of clouds. Several techniques have been proposed that use color as the discriminatory feature for cloud detection. In the existing literature, however, analysis of daytime and nighttime images is considered separa… ▽ More We analyze clouds in the earth's atmosphere using ground-based sky cameras. An accurate segmentation of clouds in the captured sky/cloud image is difficult, owing to the fuzzy boundaries of clouds. Several techniques have been proposed that use color as the discriminatory feature for cloud detection. In the existing literature, however, analysis of daytime and nighttime images is considered separately, mainly because of differences in image characteristics and applications. In this paper, we propose a light-weight deep-learning architecture called CloudSegNet. It is the first that integrates daytime and nighttime (also known as nychthemeron) image segmentation in a single framework, and achieves state-of-the-art results on public databases. △ Less

Submitted 16 April, 2019; originally announced April 2019.

Comments: Published in IEEE Geoscience and Remote Sensing Letters, 2019

Predicting GPS-based PWV Measurements Using Exponential Smoothing

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Stefan Winkler

Abstract: Global Positioning System (GPS) derived precipitable water vapor (PWV) is extensively being used in atmospheric remote sensing for applications like rainfall prediction. Many applications require PWV values with good resolution and without any missing values. In this paper, we implement an exponential smoothing method to accurately predict the missing PWV values. The method shows good performance… ▽ More Global Positioning System (GPS) derived precipitable water vapor (PWV) is extensively being used in atmospheric remote sensing for applications like rainfall prediction. Many applications require PWV values with good resolution and without any missing values. In this paper, we implement an exponential smoothing method to accurately predict the missing PWV values. The method shows good performance in terms of capturing the seasonal variability of PWV values. We report a root mean square error of 0.1~mm for a lead time of 15 minutes, using past data of 30 hours measured at 5-minute intervals. △ Less

Submitted 15 March, 2019; originally announced March 2019.

Journal ref: Published in Proc. IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2019

A Potential Low Cost Remote Sensing Using GPS Derived PWV

Authors: Shilpa Manandhar, Yee Hui Lee, Yu Song Meng, Feng Yuan, Soumyabrata Dev

Abstract: In this paper, the Precipitable Water Vapor (PWV) content of the atmosphere is derived using the Global Positioning System (GPS) signal delays. The PWV values from GPS are calculated at different elevation cut-off angles. It was found that the significant range of elevation cut-off angles is from 5 degrees to 50 degrees. The PWV values calculated from GPS using varying cut-off angles from this ran… ▽ More In this paper, the Precipitable Water Vapor (PWV) content of the atmosphere is derived using the Global Positioning System (GPS) signal delays. The PWV values from GPS are calculated at different elevation cut-off angles. It was found that the significant range of elevation cut-off angles is from 5 degrees to 50 degrees. The PWV values calculated from GPS using varying cut-off angles from this range were then compared to the PWV values calculated using the radiosonde data. The correlation coefficient and the Root Mean Square (RMS) error between the GPS and radiosonde derived PWV decreases with the increasing cut-off angle and the distance between the two. The seasonal parameters also effect the relation between the two. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: Published in Proc. IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2018

Systematic Study of Weather Variables for Rainfall Detection

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Stefan Winkler, Yu Song Meng

Abstract: Numerous weather parameters affect the occurrence and amount of rainfall. Therefore, it is important to study these parameters and their interdependency. In this paper, different weather and time-related variables -- relative humidity, solar radiation, temperature, dew point, day-of-year, and time-of-day are analyzed systematically using Principal Component Analysis (PCA). We found that four princ… ▽ More Numerous weather parameters affect the occurrence and amount of rainfall. Therefore, it is important to study these parameters and their interdependency. In this paper, different weather and time-related variables -- relative humidity, solar radiation, temperature, dew point, day-of-year, and time-of-day are analyzed systematically using Principal Component Analysis (PCA). We found that four principal components explain a cumulative variance of 85%. The first two principal components are applied to distinguish rain and no-rain scenarios as well. We conclude that all 7 variables have similar contribution towards rainfall detection. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: Published in Proc. IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2018

A Data-driven Approach to Detecting Precipitation from Meteorological Sensor Data

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng, Stefan Winkler

Abstract: Precipitation is dependent on a myriad of atmospheric conditions. In this paper, we study how certain atmospheric parameters impact the occurrence of rainfall. We propose a data-driven, machine-learning based methodology to detect precipitation using various meteorological sensor data. Our approach achieves a true detection rate of 87.4% and a moderately low false alarm rate of 32.2%. Precipitation is dependent on a myriad of atmospheric conditions. In this paper, we study how certain atmospheric parameters impact the occurrence of rainfall. We propose a data-driven, machine-learning based methodology to detect precipitation using various meteorological sensor data. Our approach achieves a true detection rate of 87.4% and a moderately low false alarm rate of 32.2%. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Comments: Published in Proc. IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2018

On the Importance of PWV in Detecting Precipitation

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng

Abstract: With a rapid increase in the number of geostationary satellites around the earth's orbit, there has been a renewed interest in using Global Positioning System (GPS) to understand several phenomenon in earth's atmosphere. Such study using GPS devices are popular amongst the remote sensing community, as they provide several advantages with respect to scalability and range of applications. In this pa… ▽ More With a rapid increase in the number of geostationary satellites around the earth's orbit, there has been a renewed interest in using Global Positioning System (GPS) to understand several phenomenon in earth's atmosphere. Such study using GPS devices are popular amongst the remote sensing community, as they provide several advantages with respect to scalability and range of applications. In this paper, we discuss how GPS signals can be used to estimate the amount of water vapor in the atmosphere. Furthermore, we demonstrate the importance of such precipitable water vapor (PWV) in the atmosphere for the task of rainfall detection. We present a detailed analysis in our dataset of meteorological data of 3 years. Test dataset shows that use of PWV in rainfall detection helps to reduce the false alarm rate by almost 12%. △ Less

Submitted 19 April, 2018; originally announced April 2018.

Comments: Published in IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2018

Transition Matrix Cluster Algorithms

Authors: David Yevick, Yong Hwan Lee

Abstract: We demonstrate that a series of procedures for increasing the efficiency of transition matrix calculations can be realized by integrating the standard single-spin flip transition matrix method with global cluster flip** techniques. Our calculations employ a simple and accurate method based on detailed balance for computing the density of states from the Ising model transition matrix. We demonstrate that a series of procedures for increasing the efficiency of transition matrix calculations can be realized by integrating the standard single-spin flip transition matrix method with global cluster flip** techniques. Our calculations employ a simple and accurate method based on detailed balance for computing the density of states from the Ising model transition matrix. △ Less

Submitted 25 December, 2018; v1 submitted 28 March, 2018; originally announced March 2018.

Journal ref: International Journal of Modern Physics CVol. 30, No. 01, 1950004 (2019)

Highly Efficient Carrier Multiplication in van der Waals layered Materials

Authors: Ji-Hee Kim, Matthew R. Bergren, ** Cheol Park, Subash Adhikari, Michael Lorke, Thomas Fraunheim, Duk-Hyun Choe, Beom Kim, Hyunyong Choi, Tom Gregorkiewicz, Young Hee Lee

Abstract: Carrier multiplication (CM), a photo-physical process to generate multiple electron-hole pairs by exploiting excess energy of free carriers, is explored for efficient photovoltaic conversion of photons from the blue solar band, predominantly wasted as heat in standard solar cells. Current state-of-the-art approaches with nanomaterials have demonstrated improved CM but are not satisfactory due to h… ▽ More Carrier multiplication (CM), a photo-physical process to generate multiple electron-hole pairs by exploiting excess energy of free carriers, is explored for efficient photovoltaic conversion of photons from the blue solar band, predominantly wasted as heat in standard solar cells. Current state-of-the-art approaches with nanomaterials have demonstrated improved CM but are not satisfactory due to high energy loss and inherent difficulties with carrier extraction. Here, we report ultra-efficient CM in van der Waals (vdW) layered materials that commences at the energy conservation limit and proceeds with nearly 100% conversion efficiency. A small threshold energy, as low as twice the bandgap, was achieved, marking an onset of quantum yield with enhanced carrier generation. Strong Coulomb interactions between electrons confined within vdW layers allow rapid electron-electron scattering to prevail over electron-phonon scattering. Additionally, the presence of electron pockets spread over momentum space could also contribute to the high CM efficiency. Combining with high conductivity and optimal bandgap, these superior CM characteristics identify vdW materials for third-generation solar cell. △ Less

Submitted 5 January, 2018; originally announced January 2018.

Comments: 17 pages, 4 figures

Analyzing Cloud Optical Properties Using Sky Cameras

Authors: Shilpa Manandhar, Soumyabrata Dev, Yee Hui Lee, Yu Song Meng

Abstract: Clouds play a significant role in the fluctuation of solar radiation received by the earth's surface. It is important to study the various cloud properties, as it impacts the total solar irradiance falling on the earth's surface. One of such important optical properties of the cloud is the Cloud Optical Thickness (COT). It is defined with the amount of light that can pass through the clouds. The C… ▽ More Clouds play a significant role in the fluctuation of solar radiation received by the earth's surface. It is important to study the various cloud properties, as it impacts the total solar irradiance falling on the earth's surface. One of such important optical properties of the cloud is the Cloud Optical Thickness (COT). It is defined with the amount of light that can pass through the clouds. The COT values are generally obtained from satellite images. However, satellite images have a low temporal- and spatial- resolutions; and are not suitable for study in applications as solar energy generation and forecasting. Therefore, ground-based sky cameras are now getting popular in such fields. In this paper, we analyze the cloud optical thickness value, from the ground-based sky cameras, and provide future research directions. △ Less

Submitted 24 August, 2017; originally announced August 2017.

Comments: Published in Proc. Progress In Electromagnetics Research Symposium (PIERS), 2017

Study of Clear Sky Models for Singapore

Authors: Soumyabrata Dev, Shilpa Manandhar, Yee Hui Lee, Stefan Winkler

Abstract: The estimation of total solar irradiance falling on the earth's surface is important in the field of solar energy generation and forecasting. Several clear-sky solar radiation models have been developed over the last few decades. Most of these models are based on empirical distribution of various geographical parameters; while a few models consider various atmospheric effects in the solar energy e… ▽ More The estimation of total solar irradiance falling on the earth's surface is important in the field of solar energy generation and forecasting. Several clear-sky solar radiation models have been developed over the last few decades. Most of these models are based on empirical distribution of various geographical parameters; while a few models consider various atmospheric effects in the solar energy estimation. In this paper, we perform a comparative analysis of several popular clear-sky models, in the tropical region of Singapore. This is important in countries like Singapore, where we are primarily focused on reliable and efficient solar energy generation. We analyze and compare three popular clear-sky models that are widely used in the literature. We validate our solar estimation results using actual solar irradiance measurements obtained from collocated weather stations. We finally conclude the most reliable clear sky model for Singapore, based on all clear sky days in a year. △ Less

Submitted 24 August, 2017; originally announced August 2017.

Comments: Published in Proc. Progress In Electromagnetics Research Symposium (PIERS), 2017

Atomic and electronic structure of a copper/graphene interface as prepared and 1.5 years after

Authors: D. W. Boukhvalov, P. F. Bazylewski, A. I. Kukharenko, I. S. Zhidkov, Yu. S. Ponosov, E. Z. Kurmaev, S. O. Cholakh, Y. H. Lee, G. S. Chang

Abstract: We report the results of X-ray spectroscopy and Raman measurements of as-prepared graphene on a high quality copper surface and the same materials after 1.5 years under different conditions (ambient and low humidity). The obtained results were compared with density functional theory calculations of the formation energies and electronic structures of various structural defects in graphene/Cu interf… ▽ More We report the results of X-ray spectroscopy and Raman measurements of as-prepared graphene on a high quality copper surface and the same materials after 1.5 years under different conditions (ambient and low humidity). The obtained results were compared with density functional theory calculations of the formation energies and electronic structures of various structural defects in graphene/Cu interfaces. For evaluation of the stability of the carbon cover, we propose a two-step model. The first step is oxidation of the graphene, and the second is perforation of graphene with the removal of carbon atoms as part of the carbon dioxide molecule. Results of the modeling and experimental measurements provide evidence that graphene grown on high-quality copper substrate becomes robust and stable in time (1.5 years). However, the stability of this interface depends on the quality of the graphene and the number of native defects in the graphene and substrate. The effect of the presence of a metallic substrate with defects on the stability and electronic structure of graphene is also discussed. △ Less

Submitted 30 July, 2017; originally announced July 2017.

Comments: 18 pages, 6 figures, accepted to Appl. Surf. Sci

Cloud Radiative Effect Study Using Sky Camera

Authors: Soumyabrata Dev, Shilpa Manandhar, Feng Yuan, Yee Hui Lee, Stefan Winkler

Abstract: The analysis of clouds in the earth's atmosphere is important for a variety of applications, viz. weather reporting, climate forecasting, and solar energy generation. In this paper, we focus our attention on the impact of cloud on the total solar irradiance reaching the earth's surface. We use weather station to record the total solar irradiance. Moreover, we employ collocated ground-based sky cam… ▽ More The analysis of clouds in the earth's atmosphere is important for a variety of applications, viz. weather reporting, climate forecasting, and solar energy generation. In this paper, we focus our attention on the impact of cloud on the total solar irradiance reaching the earth's surface. We use weather station to record the total solar irradiance. Moreover, we employ collocated ground-based sky camera to automatically compute the instantaneous cloud coverage. We analyze the relationship between measured solar irradiance and computed cloud coverage value, and conclude that higher cloud coverage greatly impacts the total solar irradiance. Such studies will immensely help in solar energy generation and forecasting. △ Less

Submitted 14 March, 2017; originally announced March 2017.

Comments: Accepted in Proc. IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, 2017

Detecting Rainfall Onset Using Sky Images

Authors: Soumyabrata Dev, Shilpa Manandhar, Yee Hui Lee, Stefan Winkler

Abstract: Ground-based sky cameras (popularly known as Whole Sky Imagers) are increasingly used now-a-days for continuous monitoring of the atmosphere. These imagers have higher temporal and spatial resolutions compared to conventional satellite images. In this paper, we use ground-based sky cameras to detect the onset of rainfall. These images contain additional information about cloud coverage and movemen… ▽ More Ground-based sky cameras (popularly known as Whole Sky Imagers) are increasingly used now-a-days for continuous monitoring of the atmosphere. These imagers have higher temporal and spatial resolutions compared to conventional satellite images. In this paper, we use ground-based sky cameras to detect the onset of rainfall. These images contain additional information about cloud coverage and movement and are therefore useful for accurate rainfall nowcast. We validate our results using rain gauge measurement recordings and achieve an accuracy of 89% for correct detection of rainfall onset. △ Less

Submitted 21 October, 2016; originally announced October 2016.

Comments: Accepted in Proc. TENCON 2016 - 2016 IEEE Region 10 Conference

The characterization of Co-nanoparticles supported on graphene

Authors: P. Bazylewski, D. W. Boukhvalov, A. I. Kukharenko, E. Z. Kurmaev, A. Hunt, A. Moewes, Y. H. Lee, S. O. Cholakh, G. S. Chang

Abstract: The results of density functional theory calculations and measurements using X-ray photoelectron spectroscopy of Co-nanoparticles dispersed on graphene/Cu are presented. It is found that for low cobalt thickness (0.02 nm - 0.06 nm) the Co forms islands distributed non-homogeneously which are strongly oxidized under exposure to air to form cobalt oxides. At greater thicknesses up to 2 nm the upper… ▽ More The results of density functional theory calculations and measurements using X-ray photoelectron spectroscopy of Co-nanoparticles dispersed on graphene/Cu are presented. It is found that for low cobalt thickness (0.02 nm - 0.06 nm) the Co forms islands distributed non-homogeneously which are strongly oxidized under exposure to air to form cobalt oxides. At greater thicknesses up to 2 nm the upper Co-layers are similarly oxidized whereas the lower layers contacting the graphene remain metallic. The measurements indicate a Co2+ oxidation state with no evidence of a 3+ state appearing at any Co thickness, consistent with CoO and Co[OH]2. The results show that thicker Co (2nm) coverage induces the formation of a protective oxide layer while providing the magnetic properties of Co nanoparticles. △ Less

Submitted 2 September, 2015; originally announced September 2015.

Comments: 20 pages, 8 figures, accepted to RSC Advances. arXiv admin note: text overlap with arXiv:1411.3611

A Storage Ring Experiment to Detect a Proton Electric Dipole Moment

Authors: V. Anastassopoulos, S. Andrianov, R. Baartman, M. Bai, S. Baessler, J. Benante, M. Berz, M. Blaskiewicz, T. Bowcock, K. Brown, B. Casey, M. Conte, J. Crnkovic, G. Fanourakis, A. Fedotov, P. Fierlinger, W. Fischer, M. O. Gaisser, Y. Giomataris, M. Grosse-Perdekamp, G. Guidoboni, S. Haciomeroglu, G. Hoffstaetter, H. Huang, M. Incagli , et al. (66 additional authors not shown)

Abstract: A new experiment is described to detect a permanent electric dipole moment of the proton with a sensitivity of $10^{-29}e\cdot$cm by using polarized "magic" momentum $0.7$~GeV/c protons in an all-electric storage ring. Systematic errors relevant to the experiment are discussed and techniques to address them are presented. The measurement is sensitive to new physics beyond the Standard Model at the… ▽ More A new experiment is described to detect a permanent electric dipole moment of the proton with a sensitivity of $10^{-29}e\cdot$cm by using polarized "magic" momentum $0.7$~GeV/c protons in an all-electric storage ring. Systematic errors relevant to the experiment are discussed and techniques to address them are presented. The measurement is sensitive to new physics beyond the Standard Model at the scale of 3000~TeV. △ Less

Submitted 15 February, 2015; originally announced February 2015.

Comments: 8 pages, 3 figures

Silicon-Chip Mid-Infrared Frequency Comb Generation

Authors: Austin G. Griffith, Ryan K. W. Lau, Jaime Cardenas, Yoshitomo Okawachi, Aseema Mohanty, Romy Fain, Yoon Ho Daniel Lee, Mengjie Yu, Christopher T. Phare, Carl B. Poitras, Alexander L. Gaeta, Michal Lipson

Abstract: Optical frequency combs represent a revolutionary technology for high precision spectroscopy due to their narrow linewidths and precise frequency spacing. Generation of such combs in the mid-infrared (IR) spectral region (2-20 um) is of great interest due to the presence of a large number of gas absorption lines in this wavelength regime. Recently, frequency combs have been demonstrated in the MIR… ▽ More Optical frequency combs represent a revolutionary technology for high precision spectroscopy due to their narrow linewidths and precise frequency spacing. Generation of such combs in the mid-infrared (IR) spectral region (2-20 um) is of great interest due to the presence of a large number of gas absorption lines in this wavelength regime. Recently, frequency combs have been demonstrated in the MIR in several platforms, including fiber combs, mode-locked lasers, optical parametric oscillators, and quantum cascade lasers. However, these platforms are either relatively bulky or challenging to integrate on-chip. An alternative approach using parametric mixing in microresonators is highly promising since the platform is extremely compact and can operate with relatively low powers. However, material and dispersion engineering limitations have prevented the realization of a microresonator comb source past 2.55 um. Although silicon could in principle provide a CMOS compatible platform for on-chip comb generation deep into the mid-IR, to date, silicon's linear and nonlinear losses have prevented the realization of a microresonator-based comb source. Here we overcome these limitations and realize a broadband frequency comb spanning from 2.1 um to 3.5 um and demonstrate its viability as a spectroscopic sensing platform. Such a platform is compact and robust and offers the potential to be versatile and durable for use outside the laboratory environment for applications such as real-time monitoring of atmospheric gas conditions. △ Less

Submitted 5 August, 2014; originally announced August 2014.

Comments: 16 pages, 4 figures

Ultrafast zero balance of the oscillator-strength sum rule in graphene

Authors: Jaeseok Kim, Seong Chu Lim, Seung ** Chae, Inhee Maeng, Younghwan Choi, Soonyoung Cha, Young Hee Lee, Hyunyong Choi

Abstract: Oscillator-strength sum rule in light-induced transitions is one general form of quantum-mechanical identities. Although this sum rule is well established in equilibrium photo-physics, an experimental corroboration for the validation of the sum rule in a nonequilibrium regime has been a long-standing unexplored question. The simple band structure of graphene is an ideal system for investigating th… ▽ More Oscillator-strength sum rule in light-induced transitions is one general form of quantum-mechanical identities. Although this sum rule is well established in equilibrium photo-physics, an experimental corroboration for the validation of the sum rule in a nonequilibrium regime has been a long-standing unexplored question. The simple band structure of graphene is an ideal system for investigating this question due to the linear Dirac-like energy dispersion. Here, we employed both ultrafast terahertz and optical spectroscopy to directly monitor the transient oscillator-strength balancing between quasi-free low-energy oscillators and high-energy Fermi-edge ones. Upon photo-excitation of hot Dirac fermions, we observed that the ultrafast depletion of high-energy oscillators precisely complements the increased terahertz absorption oscillators. Our results may provide an experimental priori to understand, for example, the intrinsic free-carrier dynamics to the high-energy photo-excitation, responsible for optoelectronic operation such as graphene-based phototransistor or solar-energy harvesting devices. △ Less

Submitted 10 September, 2013; originally announced September 2013.

Deposited low temperature silicon GHz modulator

Authors: Yoon Ho Daniel Lee, Michael O. Thompson, Michal Lipson

Abstract: The majority of silicon photonics is built on silicon-on-insulator (SOI) wafers while the majority of electronics, including CPUs and memory, are built on bulk silicon wafers, limiting broader acceptance of silicon photonics. This discrepancy is a result of silicon photonics's requirement for a single-crystalline silicon (c-Si) layer and a thick undercladding for optical guiding that bulk silicon… ▽ More The majority of silicon photonics is built on silicon-on-insulator (SOI) wafers while the majority of electronics, including CPUs and memory, are built on bulk silicon wafers, limiting broader acceptance of silicon photonics. This discrepancy is a result of silicon photonics's requirement for a single-crystalline silicon (c-Si) layer and a thick undercladding for optical guiding that bulk silicon wafers to not provide. While the undercladding problem can be partially addressed by substrate removal techniques, the complexity of co-integrating photonics with state-of-the-art transistors and real estate competition between electronics and photonics remain problematic. We show here a platform for deposited GHz silicon photonics based on polycrystalline silicon with high optical quality suitable for high performance electro-optic devices. We demonstrate 3 Gbps polysilicon electro-optic modulator fabricated on a deposited polysilicon layer fully compatible with CMOS backend integration. These results open up an array of possibilities for silicon photonics including photonics on DRAM and flexible substrates. △ Less

Submitted 4 June, 2013; originally announced June 2013.