-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Merging bound states in the continuum at third-order $Γ$ point enabled by controlling Fourier harmonic components in lattice parameters
Authors:
Sun-Goo Lee,
Seong-Han Kim,
Wook-Jae Lee
Abstract:
Recent studies have demonstrated that ultrahigh-$Q$ resonances, which are robust to fabrication imperfections, can be realized by merging multiple bound states in the continuum (BICs) in momentum space. The merging of multiple BICs holds significant promise for practical applications, providing a robust means to attain ultrahigh-$Q$ resonances that greatly enhance light-matter interactions. In thi…
▽ More
Recent studies have demonstrated that ultrahigh-$Q$ resonances, which are robust to fabrication imperfections, can be realized by merging multiple bound states in the continuum (BICs) in momentum space. The merging of multiple BICs holds significant promise for practical applications, providing a robust means to attain ultrahigh-$Q$ resonances that greatly enhance light-matter interactions. In this study, we introduce a novel approach to achieve the merging of BICs at the edges of the fourth stop band, which opens at the third-order $Γ$ point, in one-dimensional leaky-mode photonic lattices. Photonic band gaps and BICs arise from periodic modulations in lattice parameters. However, near the third-order $Γ$ point, out-of-plane radiation arises by the first and second Fourier harmonic components in the lattice parameters. Accidental BICs can emerge at specific $k$ points where an optimal balance exists between these two Fourier harmonic components. We demonstrate that these accidental BICs are topologically stable, and their positions in momentum space can be precisely controlled by adjusting a specific lattice parameter that influences the strength of the first and second Fourier harmonic components. Furthermore, we show that accidental BICs can be merged at the third-order $Γ$ point, with or without a symmetry-protected BIC, by finely adjusting this specific lattice parameter while kee** other parameters constant.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Acceptance Tests of more than 10 000 Photomultiplier Tubes for the multi-PMT Digital Optical Modules of the IceCube Upgrade
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise,
C. Bellenghi
, et al. (399 additional authors not shown)
Abstract:
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities…
▽ More
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities can easily be adapted to other PMTs, such that they can, e.g., be re-used for testing the PMTs for IceCube-Gen2. Single photoelectron response, high voltage dependence, time resolution, prepulse, late pulse, afterpulse probabilities, and dark rates were measured for each PMT. We describe the design of the testing facilities, the testing procedures, and the results of the acceptance tests.
△ Less
Submitted 20 June, 2024; v1 submitted 30 April, 2024;
originally announced April 2024.
-
Carrier confinement and alloy disorder exacerbate Auger-Meitner recombination in AlGaN ultraviolet light-emitting diodes
Authors:
Nick Pant,
Kyle Bushick,
Andrew McAllister,
Woncheol Lee,
Chris G. Van de Walle,
Emmanouil Kioupakis
Abstract:
The quantum efficiency of AlGaN ultraviolet light-emitting diodes (LEDs) declines (droops) at increasing operating powers due to Auger-Meitner recombination (AMR). Using first-principles density-functional theory, we show that indirect AMR mediated by electron-phonon coupling and alloy disorder can induce bulk $C$ coefficients as large as $\sim10^{-31}$ cm$^6$/s. Furthermore, we find that the conf…
▽ More
The quantum efficiency of AlGaN ultraviolet light-emitting diodes (LEDs) declines (droops) at increasing operating powers due to Auger-Meitner recombination (AMR). Using first-principles density-functional theory, we show that indirect AMR mediated by electron-phonon coupling and alloy disorder can induce bulk $C$ coefficients as large as $\sim10^{-31}$ cm$^6$/s. Furthermore, we find that the confinement of carriers by polarization fields within quantum wells severely relaxes crystal-momentum conservation, which exacerbates the rate of AMR over radiative recombination by an order of magnitude relative to the bulk. This results in a striking decrease in quantum efficiency at high power. Suppressing polarization fields and jointly increasing the well width would greatly mitigate AMR and efficiency droop.
△ Less
Submitted 16 March, 2024;
originally announced March 2024.
-
Improved modeling of in-ice particle showers for IceCube event reconstruction
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise
, et al. (394 additional authors not shown)
Abstract:
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstr…
▽ More
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstruction that better captures our current knowledge of ice optical properties. When evaluated on a Monte Carlo simulation set, the median angular resolution for in-ice particle showers improves by over a factor of three compared to a reconstruction based on a simplified model of the ice. The most substantial improvement is obtained when including effects of birefringence due to the polycrystalline structure of the ice. When evaluated on data classified as particle showers in the high-energy starting events sample, a significantly improved description of the events is observed.
△ Less
Submitted 22 April, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Deep learning methods for Hamiltonian parameter estimation and magnetic domain image generation in twisted van der Waals magnets
Authors:
Woo Seok Lee,
Taegeun Song,
Kyoung-Min Kim
Abstract:
The application of twist engineering in van der Waals magnets has opened new frontiers in the field of two-dimensional magnetism, yielding distinctive magnetic domain structures. Despite the introduction of numerous theoretical methods, limitations persist in terms of accuracy or efficiency due to the complex nature of the magnetic Hamiltonians pertinent to these systems. In this study, we introdu…
▽ More
The application of twist engineering in van der Waals magnets has opened new frontiers in the field of two-dimensional magnetism, yielding distinctive magnetic domain structures. Despite the introduction of numerous theoretical methods, limitations persist in terms of accuracy or efficiency due to the complex nature of the magnetic Hamiltonians pertinent to these systems. In this study, we introduce a deep-learning approach to tackle these challenges. Utilizing customized, fully connected networks, we develop two deep-neural-network kernels that facilitate efficient and reliable analysis of twisted van der Waals magnets. Our regression model is adept at estimating the magnetic Hamiltonian parameters of twisted bilayer CrI3 from its magnetic domain images generated through atomistic spin simulations. The generative model excels in producing precise magnetic domain images from the provided magnetic parameters. The trained networks for these models undergo thorough validation, including statistical error analysis and assessment of robustness against noisy injections. These advancements not only extend the applicability of deep-learning methods to twisted van der Waals magnets but also streamline future investigations into these captivating yet poorly understood systems.
△ Less
Submitted 1 June, 2024; v1 submitted 17 February, 2024;
originally announced February 2024.
-
Evaluation of the relativistic redshift in frequency standards at KRISS
Authors:
Jisun Lee,
Jay Hyoun Kwon,
Chang Yong Park,
Huidong Kim,
In-Mook Choi,
** Wan Chung,
Won-Kyu Lee
Abstract:
Relativistic redshift correction should be accurately considered in frequency comparisons between frequency standards. In this study, we evaluated the relativistic redshift at Korea Research Institute of Standards and Science (KRISS) using three different methods, depending on whether the approach was traditional or modern or whether the geopotential model was global or local. The results of the t…
▽ More
Relativistic redshift correction should be accurately considered in frequency comparisons between frequency standards. In this study, we evaluated the relativistic redshift at Korea Research Institute of Standards and Science (KRISS) using three different methods, depending on whether the approach was traditional or modern or whether the geopotential model was global or local. The results of the three methods agreed well with one another, and the height of an Yb optical lattice clock (KRISS-Yb1) was determined to be 75.15 m with an uncertainty of 0.04 m with respect to the conventionally adopted equipotential surface W0(CGPM), the value of which is defined to be 62 636 856.0 m2/s2. Accordingly, the relativistic redshift of KRISS-Yb1 was evaluated to be 8.193(4)x10-15. These data are applicable to the frequency standards at KRISS, one of which regularly participates in the calibration of the International Atomic Time (TAI).
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
Do AI models produce better weather forecasts than physics-based models? A quantitative evaluation case study of Storm Ciarán
Authors:
Andrew J. Charlton-Perez,
Helen F. Dacre,
Simon Driscoll,
Suzanne L. Gray,
Ben Harvey,
Natalie J. Harvey,
Kieran M. R. Hunt,
Robert W. Lee,
Ran**i Swaminathan,
Remy Vandaele,
Ambrogio Volonté
Abstract:
There has been huge recent interest in the potential of making operational weather forecasts using machine learning techniques. As they become a part of the weather forecasting toolbox, there is a pressing need to understand how well current machine learning models can simulate high-impact weather events. We compare forecasts of Storm Ciarán, a European windstorm that caused sixteen deaths and ext…
▽ More
There has been huge recent interest in the potential of making operational weather forecasts using machine learning techniques. As they become a part of the weather forecasting toolbox, there is a pressing need to understand how well current machine learning models can simulate high-impact weather events. We compare forecasts of Storm Ciarán, a European windstorm that caused sixteen deaths and extensive damage in Northern Europe, made by machine learning and numerical weather prediction models. The four machine learning models considered (FourCastNet, Pangu-Weather, GraphCast and FourCastNet-v2) produce forecasts that accurately capture the synoptic-scale structure of the cyclone including the position of the cloud head, shape of the warm sector and location of warm conveyor belt jet, and the large-scale dynamical drivers important for the rapid storm development such as the position of the storm relative to the upper-level jet exit. However, their ability to resolve the more detailed structures important for issuing weather warnings is more mixed. All of the machine learning models underestimate the peak amplitude of winds associated with the storm, only some machine learning models resolve the warm core seclusion and none of the machine learning models capture the sharp bent-back warm frontal gradient. Our study shows there is a great deal about the performance and properties of machine learning weather forecasts that can be derived from case studies of high-impact weather events such as Storm Ciarán.
△ Less
Submitted 19 February, 2024; v1 submitted 5 December, 2023;
originally announced December 2023.
-
Transition from quasi-unidirectional to unidirectional guided resonances in leaky-mode photonic lattices
Authors:
Sun-Goo Lee,
Seong-Han Kim,
Wook-Jae Lee
Abstract:
Unidirectional light emission from planar photonic structures is highly advantageous for a wide range of optoelectronic applications. Recently, it has been demonstrated that unidirectional guided resonances (UGRs) can be realized by utilizing topological polarization singularities in momentum space. However, the practical application of these topological unidirectional emitters has been limited du…
▽ More
Unidirectional light emission from planar photonic structures is highly advantageous for a wide range of optoelectronic applications. Recently, it has been demonstrated that unidirectional guided resonances (UGRs) can be realized by utilizing topological polarization singularities in momentum space. However, the practical application of these topological unidirectional emitters has been limited due to their intricate geometric configurations, requiring special efforts with high-cost fabrication processes. In this study, we show that unidirectional light emission can be achieved in conventional one-dimensional zero-contrast gratings (ZCGs), which can be easily fabricated using current nanofabrication technologies. In ZCGs, the interband coupling between even-like and odd-like waveguide modes leads to the formation of quasi-UGRs, characterized by significantly higher decay rates in either the upward or downward direction compared to the opposite direction. We demonstrate that these quasi-UGRs evolve into genuine UGRs with an gradual increase in grating thickness. Moreover, the emission direction of UGRs can be selectively steered either upward or downward by adjusting the lattice parameters. In addition to quasi-UGRs and UGRs, our study also reveals additional topological phenomena in ZCGs, including exceptional points and quasi-BICs.
△ Less
Submitted 30 November, 2023;
originally announced December 2023.
-
Dynamics of the Reynolds Shear Stress in Adverse Pressure-Gradient Flows, from the Lagrangian Transport Formalism
Authors:
T. W. Lee,
J. E. Park
Abstract:
Using the Lagrangian transport analysis for the turbulence momentum, the Reynolds stress gradient can be expressed as a function of the local momentum flux and force terms. From this perspective of an observer moving at the local mean velocity, the Reynolds stress gradient represents the lateral transport of streamwise momentum, balanced by the u'2 transport, pressure and viscous force terms. Data…
▽ More
Using the Lagrangian transport analysis for the turbulence momentum, the Reynolds stress gradient can be expressed as a function of the local momentum flux and force terms. From this perspective of an observer moving at the local mean velocity, the Reynolds stress gradient represents the lateral transport of streamwise momentum, balanced by the u'2 transport, pressure and viscous force terms. Data from direct numerical simulations (DNS) have been used to validate this approach for adverse pressure-gradient boundary layer flows at Clauser parameter of 1.4 and 39 (Kitsios et al., 2017), with a good degree of consistency and agreements. Minute fluctuations and attributes in the Reynolds shear stress profile are replicated through the Lagrangian momentum equation. Gradient analysis also leads to scaling at the first- and second-derivative levels, for u'2, v'2 and u'v'.
△ Less
Submitted 7 July, 2024; v1 submitted 30 October, 2023;
originally announced October 2023.
-
Coherent Exciton-Lattice Dynamics in a 2D Metal Organochalcogenolate Semiconductor
Authors:
Eric R. Powers,
Watcharaphol Paritmongkol,
Dillon C. Yost,
Woo Seok Lee,
Jeffrey C. Grossman,
William A. Tisdale
Abstract:
Hybrid organic-inorganic nanomaterials can exhibit transitional behavior that deviates from models developed for all-organic or all-inorganic materials systems. Here, we reveal the complexity of exciton-phonon interactions in a recently discovered 2D layered hybrid organic-inorganic semiconductor, silver phenylselenolate (AgSePh). Using femtosecond resonant impulsive vibrational spectroscopy and n…
▽ More
Hybrid organic-inorganic nanomaterials can exhibit transitional behavior that deviates from models developed for all-organic or all-inorganic materials systems. Here, we reveal the complexity of exciton-phonon interactions in a recently discovered 2D layered hybrid organic-inorganic semiconductor, silver phenylselenolate (AgSePh). Using femtosecond resonant impulsive vibrational spectroscopy and non-resonant Raman scattering, we measure multiple hybrid organic-inorganic vibrational modes and identify a subset of these modes that strongly couple to the electronic excited state. Calculations by density functional perturbation theory show that these strongly coupled modes exhibit large out-of-plane silver atomic motions and silver-selenium spacing displacements. Moreover, analysis of photoluminescence fine-structure splitting and temperature-dependent peak-shifting/linewidth-broadening suggests that light emission in AgSePh is most strongly affected by a compound 100 cm-1 mode involving the wagging motion of phenylselenolate ligands and accompanying metal-chalcogen stretching. Finally, red-shifting of vibrational modes with increasing temperature reveals a high degree of anharmonicity arising from non-covalent interactions between phenyl rings. These findings reveal the unique effects of hybrid vibrational modes in organic-inorganic semiconductors and motivate future work aimed at specifically engineering such interactions through chemical and structural modification.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Anomalous Diffusion of Lithium-Anion Clusters in Ionic Liquids
Authors:
YeongKyu Lee,
JunBeom Cho,
Junseong Kim,
Won Bo Lee,
YongSeok Jho
Abstract:
Lithium-ion transport is significantly retarded in ionic liquids (ILs). In this work, we performed extensive molecular dynamics (MD) simulations to mimic the kinetics of lithium ions in ILs using [\emph{N}-methyl-\emph{N}-propylpyrrolidium (pyr$_{13}$)][bis(trifluoromethanesulfonyl)imide (Ntf$_{2}$)] with added LiNtf$_{2}$ salt. And we analyzed their transport, develo** a two-state model and com…
▽ More
Lithium-ion transport is significantly retarded in ionic liquids (ILs). In this work, we performed extensive molecular dynamics (MD) simulations to mimic the kinetics of lithium ions in ILs using [\emph{N}-methyl-\emph{N}-propylpyrrolidium (pyr$_{13}$)][bis(trifluoromethanesulfonyl)imide (Ntf$_{2}$)] with added LiNtf$_{2}$ salt. And we analyzed their transport, develo** a two-state model and comparing it to the machine learning-identified states. The transport of lithium ions involves local shell exchanges of the Ntf$_{2}$ in the medium. We calculated train size distributions over various time scales. The train size distribution decays as a power law, representing non-Poissonian bursty shell exchanges. We analyzed the non-Poissonian processes of lithium ions transport as a two-state (soft and hard) model. We analytically calculated the transition probability of the two-state model, which fits well to the lifetime autocorrelation functions of LiNtf$_{2}$ shells. To identify two states, we introduced the graph neutral network incorporating local molecular structure. The results reveal that the shell-soft state mainly contributes to the transport of the lithium ions, and their contribution is more important in low temperatures. Hence, it is the key for enhanced lithium ion transport to increase the fraction of the shell-soft state.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
Towards Real-time Training of Physics-informed Neural Networks: Applications in Ultrafast Ultrasound Blood Flow Imaging
Authors:
Haotian Guan,
**** Dong,
Wei-Ning Lee
Abstract:
Physics-informed Neural Network (PINN) is one of the most preeminent solvers of Navier-Stokes equations, which are widely used as the governing equation of blood flow. However, current approaches, relying on full Navier-Stokes equations, are impractical for ultrafast Doppler ultrasound, the state-of-the-art technique for depiction of complex blood flow dynamics \emph{in vivo} through acquired thou…
▽ More
Physics-informed Neural Network (PINN) is one of the most preeminent solvers of Navier-Stokes equations, which are widely used as the governing equation of blood flow. However, current approaches, relying on full Navier-Stokes equations, are impractical for ultrafast Doppler ultrasound, the state-of-the-art technique for depiction of complex blood flow dynamics \emph{in vivo} through acquired thousands of frames (or, timestamps) per second. In this article, we first propose a novel training framework of PINN for solving Navier-Stokes equations by discretizing Navier-Stokes equations into steady state and sequentially solving steady-state Navier-Stokes equations with transfer learning. The novel training framework is coined as SeqPINN. Upon the success of SeqPINN, we adopt the idea of averaged constant stochastic gradient descent (SGD) as initialization and propose a parallel training scheme for all timestamps. To ensure an initialization that generalizes well, we borrow the concept of Stochastic Weight Averaging Gaussian to perform uncertainty estimation as an indicator of generalizability of the initialization. This algorithm, named SP-PINN, further expedites training of PINN while achieving comparable accuracy with SeqPINN. Finite-element simulations and \emph{in vitro} phantoms of single-branch and trifurcate blood vessels are used to evaluate the performance of SeqPINN and SP-PINN. Results show that both SeqPINN and SP-PINN are manyfold faster than the original design of PINN, while respectively achieving Root Mean Square Errors (RMSEs) of 1.01 cm/s and 1.26 cm/s on the straight vessel and 1.91 cm/s and 2.56 cm/s on the trifurcate blood vessel when recovering blood flow velocities.
△ Less
Submitted 9 September, 2023;
originally announced September 2023.
-
Determining Quasi-Equilibrium Electron and Hole Distributions of Plasmonic Photocatalysts using Photomodulated X-ray Absorption Spectroscopy
Authors:
Levi D. Palmer,
Wonseok Lee,
Chung Li Dong,
Ru-Shi Liu,
Nianqiang Wu,
Scott K. Cushing
Abstract:
Most photocatalytic and photovoltaic devices operate under broadband, constant illumination. Electron and hole dynamics in these devices, however, are usually measured using ultrafast pulsed lasers in a narrow wavelength range. In this work, we prove that steady-state, photomodulated X-ray spectra from a non-time-resolved synchrotron beamline can be used to estimate electron and hole distributions…
▽ More
Most photocatalytic and photovoltaic devices operate under broadband, constant illumination. Electron and hole dynamics in these devices, however, are usually measured using ultrafast pulsed lasers in a narrow wavelength range. In this work, we prove that steady-state, photomodulated X-ray spectra from a non-time-resolved synchrotron beamline can be used to estimate electron and hole distributions. A set of plasmonic metal core-shell nanoparticles is designed to systematically isolate photothermal, hot electron, and thermalized electron-hole pairs in a TiO2 shell. Steady-state changes in the Ti L2,3 edge are measured with and without continuous-wave illumination of the nanoparticle's localized surface plasmon resonance. Ab initio excited-state X-ray theory developed for transient X-ray measurements is then applied to model the experimental spectra in an attempt to extract the resultant steady-state carrier distributions. The results suggest that, within error, the quasi-equilibrium carrier distribution can be determined even from relatively noisy data with mixed excited-state phenomena.
△ Less
Submitted 24 January, 2024; v1 submitted 30 August, 2023;
originally announced August 2023.
-
Injection-Limited and Space-Charge-Limited Conduction in Wide Bandgap Semiconductors with Velocity Saturation Effect
Authors:
Kok Wai Lee,
Yee Sin Ang
Abstract:
Carrier conduction in wide bandgap semiconductors (WBS) often exhibits velocity saturation at the high-electric field regime. How such effect influences the transition between contact-limited and space-charge-limited current in a two-terminal device remains largely unexplored thus far. Here, we develop a generalized carrier transport model that includes contact-limited field-induced carrier inject…
▽ More
Carrier conduction in wide bandgap semiconductors (WBS) often exhibits velocity saturation at the high-electric field regime. How such effect influences the transition between contact-limited and space-charge-limited current in a two-terminal device remains largely unexplored thus far. Here, we develop a generalized carrier transport model that includes contact-limited field-induced carrier injection, space charge, carrier scattering and velocity saturation effect. The model reveals various transitional behaviors in the current-voltage characteristics, encompassing Fowler-Nordheim emission, trap-free Mott-Gurney (MG) SCLC and \emph{velocity-saturated SCLC}. Using GaN, 6H-SiC and 4H-SiC WBS as examples, we show that the velocity-saturated SCLC completely dominates the high-voltage ($10^2 \sim 10^4$ V) transport for typical sub-$μ$m GaN and SiC diodes, thus unravelling velocity-saturated SCLC as a central transport mechanism in WBG electronics.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Rapid Flood Inundation Forecast Using Fourier Neural Operator
Authors:
Alexander Y. Sun,
Zhi Li,
Wonhyun Lee,
Qixing Huang,
Bridget R. Scanlon,
Clint Dawson
Abstract:
Flood inundation forecast provides critical information for emergency planning before and during flood events. Real time flood inundation forecast tools are still lacking. High-resolution hydrodynamic modeling has become more accessible in recent years, however, predicting flood extents at the street and building levels in real-time is still computationally demanding. Here we present a hybrid proc…
▽ More
Flood inundation forecast provides critical information for emergency planning before and during flood events. Real time flood inundation forecast tools are still lacking. High-resolution hydrodynamic modeling has become more accessible in recent years, however, predicting flood extents at the street and building levels in real-time is still computationally demanding. Here we present a hybrid process-based and data-driven machine learning (ML) approach for flood extent and inundation depth prediction. We used the Fourier neural operator (FNO), a highly efficient ML method, for surrogate modeling. The FNO model is demonstrated over an urban area in Houston (Texas, U.S.) by training using simulated water depths (in 15-min intervals) from six historical storm events and then tested over two holdout events. Results show FNO outperforms the baseline U-Net model. It maintains high predictability at all lead times tested (up to 3 hrs) and performs well when applying to new sites, suggesting strong generalization skill.
△ Less
Submitted 29 July, 2023;
originally announced July 2023.
-
Merging and band transition of bound states in the continuum in leaky-mode photonic lattices
Authors:
Sun-Goo Lee,
Seong-Han Kim,
Wook-Jae Lee
Abstract:
Bound states in the continuum (BICs) theoretically have the ability to confine electromagnetic waves in limited regions with infinite radiative quality ($Q$) factors. However, in practical experiments, resonances can only exhibit finite $Q$ factors due to unwanted scattering losses caused by fabrication imperfections. Recently, it has been shown that ultrahigh-$Q$ guided-mode resonances (GMRs), wh…
▽ More
Bound states in the continuum (BICs) theoretically have the ability to confine electromagnetic waves in limited regions with infinite radiative quality ($Q$) factors. However, in practical experiments, resonances can only exhibit finite $Q$ factors due to unwanted scattering losses caused by fabrication imperfections. Recently, it has been shown that ultrahigh-$Q$ guided-mode resonances (GMRs), which are robust to fabrication imperfections, can be realized by merging multiple BICs in momentum space. In this study, we analytically and numerically investigate the merging and band transition of accidental BICs in planar photonic lattices. Accidental BICs can merge at the edges of the second stop band, either with or without a symmetry-protected BIC. We show that as the thickness of the photonic lattice gradually increases, the merged state of BICs transitions from the upper to the lower band edge. Using coupled-mode analysis, we present the analytical merging thickness at which multiple accidental BICs merge at the second-order $Γ$ point. Our coupled-mode analysis could be beneficial for achieving ultrahigh-$Q$ GMRs in various photonic lattices composed of materials with different dielectric constants.
△ Less
Submitted 4 July, 2023;
originally announced July 2023.
-
Micromotion compensation of trapped ions by qubit transition and direct scanning of dc voltages
Authors:
Woojun Lee,
Daun Chung,
Jiyong Kang,
Honggi Jeon,
Changhyun Jung,
Dong-Il "Dan" Cho,
Taehyun Kim
Abstract:
Excess micromotion is detrimental to accurate qubit control of trapped ions, thus measuring and minimizing it is crucial. In this paper, we present a simple approach for measuring and suppressing excess micromotion of trapped ions by leveraging the existing laser-driven qubit transition scheme combined with direct scanning of dc voltages. The compensation voltage is deduced by analyzing the Bessel…
▽ More
Excess micromotion is detrimental to accurate qubit control of trapped ions, thus measuring and minimizing it is crucial. In this paper, we present a simple approach for measuring and suppressing excess micromotion of trapped ions by leveraging the existing laser-driven qubit transition scheme combined with direct scanning of dc voltages. The compensation voltage is deduced by analyzing the Bessel expansion of a scanned qubit transition rate. The method provides a fair level of sensitivity for practical quantum computing applications, while demanding minimal deviation of trap condition. By accomplishing compensation of excess micromotion in the qubit momentum-excitation direction, the scheme offers an additional avenue for excess micromotion compensation, complementing existing compensation schemes.
△ Less
Submitted 2 December, 2023; v1 submitted 9 June, 2023;
originally announced June 2023.
-
Measurement of Atmospheric Neutrino Mixing with Improved IceCube DeepCore Calibration and Data Processing
Authors:
IceCube Collaboration,
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus,
J. Beise
, et al. (383 additional authors not shown)
Abstract:
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detai…
▽ More
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detail since our last study. By measuring the relative fluxes of neutrino flavors as a function of their reconstructed energies and arrival directions we constrain the atmospheric neutrino mixing parameters to be $\sin^2θ_{23} = 0.51\pm 0.05$ and $Δm^2_{32} = 2.41\pm0.07\times 10^{-3}\mathrm{eV}^2$, assuming a normal mass ordering. The resulting 40\% reduction in the error of both parameters with respect to our previous result makes this the most precise measurement of oscillation parameters using atmospheric neutrinos. Our results are also compatible and complementary to those obtained using neutrino beams from accelerators, which are obtained at lower neutrino energies and are subject to different sources of uncertainties.
△ Less
Submitted 8 August, 2023; v1 submitted 24 April, 2023;
originally announced April 2023.
-
Using Electron Energy-Loss Spectroscopy to Measure Nanoscale Electronic and Vibrational Dynamics in a TEM
Authors:
Ye-** Kim,
Levi D. Palmer,
Wonseok Lee,
Nicholas J. Heller,
Scott K. Cushing
Abstract:
Electron energy-loss spectroscopy (EELS) can measure similar information to X-ray, UV-Vis, and IR spectroscopies but with atomic resolution and increased scattering cross sections. Recent advances in electron monochromators have expanded EELS capabilities from chemical identification to the realms of synchrotron-level core-loss measurements and to low-loss, 10-100 meV excitations such as phonons,…
▽ More
Electron energy-loss spectroscopy (EELS) can measure similar information to X-ray, UV-Vis, and IR spectroscopies but with atomic resolution and increased scattering cross sections. Recent advances in electron monochromators have expanded EELS capabilities from chemical identification to the realms of synchrotron-level core-loss measurements and to low-loss, 10-100 meV excitations such as phonons, excitons, and valence structure. EELS measurements are easily correlated with electron diffraction and atomic-scale real-space imaging in a transmission electron microscope (TEM) to provide detailed local pictures of quasiparticle and bonding states. This perspective provides an overview of existing high-resolution EELS (HR-EELS) capabilities while also motivating the powerful next step in the field - ultrafast EELS in a TEM. Ultrafast EELS aims to combine atomic level, element specific, and correlated temporal measurements to better understand spatially specific excited state phenomena. Ultrafast EELS measurements also add to the abilities of steady-state HR-EELS by being able to image the electromagnetic field and use electrons to excite photon-forbidden and momentum-specific transitions. We discuss the technical challenges ultrafast HR-EELS currently faces, as well as how integration with in situ and cryo measurements could expand the technique to new systems of interest, especially molecular and biological samples.
△ Less
Submitted 11 May, 2023; v1 submitted 3 April, 2023;
originally announced April 2023.
-
High Dynamic Range Vector Atomic Magnetometer with 1 part-per-billion Resolution in Earth Field Range
Authors:
Tao Wang,
Wonjae Lee,
Mark Limes,
Tom Kornack,
Elizabeth Foley,
Michael Romalis
Abstract:
We present a high-dynamic-range vector atomic magnetometer based on applying a fast-rotating magnetic field to a pulsed $^{87}$Rb scalar atomic magnetometer. This method enables simultaneous measurements of the total magnetic field and two polar angles relative to the plane of magnetic field rotation. Using two channels in a gradiometer mode, it provides simultaneous measurements of the total fiel…
▽ More
We present a high-dynamic-range vector atomic magnetometer based on applying a fast-rotating magnetic field to a pulsed $^{87}$Rb scalar atomic magnetometer. This method enables simultaneous measurements of the total magnetic field and two polar angles relative to the plane of magnetic field rotation. Using two channels in a gradiometer mode, it provides simultaneous measurements of the total field gradient with a sensitivity of 50 $\mathrm{fT/\sqrt{Hz}}$ (1 part per billion), as well as two polar angles with resolutions of 8 $\mathrm{nrad/\sqrt{Hz}}$ at 50 $μ$T Earth field strength. The noise spectrums of these measurements are flat down to 1 Hz and 0.1 Hz, respectively. Crucially, this approach avoids several metrological difficulties associated with vector magnetometers and gradiometers. We detail the fundamental, systematic, and practical limits of such vector magnetometers. Notably, we provide a comprehensive study of the systematic effects of vector atomic magnetometers. We introduce a new concept of dynamic heading error and investigate several other systematic effects. A unique cosine-altering rotating field modulation is proposed to cancel out these systematics. Additionally, we derive fundamental limits on the sensitivity of such sensors and demonstrate that the vector sensitivity of the sensor can approach its scalar sensitivity while retaining the accuracy and metrological advantages of scalar sensors. This high-dynamic-range vector magnetometer, with ultrahigh resolution and inherent calibration, is suitable for a wide array of applications.
△ Less
Submitted 6 May, 2024; v1 submitted 31 March, 2023;
originally announced April 2023.
-
Identifying regions of importance in wall-bounded turbulence through explainable deep learning
Authors:
Andres Cremades,
Sergio Hoyas,
Rahul Deshpande,
Pedro Quintero,
Martin Lellep,
Will Junghoon Lee,
Jason Monty,
Nicholas Hutchins,
Moritz Linkmann,
Ivan Marusic,
Ricardo Vinuesa
Abstract:
Despite its great scientific and technological importance, wall-bounded turbulence is an unresolved problem in classical physics that requires new perspectives to be tackled. One of the key strategies has been to study interactions among the energy-containing coherent structures in the flow. Such interactions are explored in this study for the first time using an explainable deep-learning method.…
▽ More
Despite its great scientific and technological importance, wall-bounded turbulence is an unresolved problem in classical physics that requires new perspectives to be tackled. One of the key strategies has been to study interactions among the energy-containing coherent structures in the flow. Such interactions are explored in this study for the first time using an explainable deep-learning method. The instantaneous velocity field obtained from a turbulent channel flow simulation is used to predict the velocity field in time through a U-net architecture. Based on the predicted flow, we assess the importance of each structure for this prediction using the game-theoretic algorithm of SHapley Additive exPlanations (SHAP). This work provides results in agreement with previous observations in the literature and extends them by revealing that the most important structures in the flow are not necessarily the ones with the highest contribution to the Reynolds shear stress. We also apply the method to an experimental database, where we can identify completely new structures based on their importance score. This framework has the potential to shed light on numerous fundamental phenomena of wall-bounded turbulence, including novel strategies for flow control.
△ Less
Submitted 19 February, 2024; v1 submitted 2 February, 2023;
originally announced February 2023.
-
Predator Extinction arose from Chaos of the Prey: the Chaotic Behavior of a Homomorphic Two-Dimensional Logistic Map in the Form of Lotka-Volterra Equations
Authors:
Wei Shan Lee,
Hou Fai Chan,
Ka Ian Im,
Kuan Ieong Chan,
U Hin Cheang
Abstract:
A two-dimensional homomorphic logistic map that preserves features of the Lotka-Volterra equations was proposed. To examine chaos, iteration plots of the population, Lyapunov exponents calculated from Jacobian eigenvalues of the $2$D logistic map**, and from time series algorithms of Rosenstein and Eckmann et al. were calculated. Bifurcation diagrams may be divided into four categories depending…
▽ More
A two-dimensional homomorphic logistic map that preserves features of the Lotka-Volterra equations was proposed. To examine chaos, iteration plots of the population, Lyapunov exponents calculated from Jacobian eigenvalues of the $2$D logistic map**, and from time series algorithms of Rosenstein and Eckmann et al. were calculated. Bifurcation diagrams may be divided into four categories depending on topological shapes. Our model not only recovered the $1$D logistic map, which exhibits flip bifurcation, for the prey when there is a nonzero initial predator population, but it can also simulate normal competition between two species with equal initial populations. Despite the possibility for two species to go into chaos simultaneously, where the Neimark-Sacker bifurcation was observed, it is also possible that with the same interspecies parameters as normal but with a predator population $10$ times more than that of the prey, the latter becomes chaotic, while the former dramatically reduces to zero with only a few iterations, indicating total annihilation of the predator species. Interpreting humans as predators and natural resources as preys in the ecological system, the above-mentioned conclusion may imply that not only excessive consumption of natural resources, but its chaotic state triggered by an overpopulation of humans may backfire in a manner of total extinction of the human species. Fortunately, there is little chance for the survival of the human race, as isolated fixed points in the bifurcation diagram of the predator reveal. Finally, two possible applications of the phenomenon of chaotic extinction are proposed: one is to inhibit viruses or pests by initiating the chaotic states of the prey on which the viruses or pests rely for existence, and the other is to achieve the superconducting state with the chaotic state of the applied magnetic field.
△ Less
Submitted 24 February, 2024; v1 submitted 27 January, 2023;
originally announced January 2023.
-
Multiflagellarity leads to the size-independent swimming speed of peritrichous bacteria
Authors:
Shashank Kamdar,
Dipanjan Ghosh,
Wanho Lee,
Maria Tatulea-Codrean,
Yongsam Kim,
Supriya Ghosh,
Youngjun Kim,
Tejesh Cheepuru,
Eric Lauga,
Sookkyung Lim,
Xiang Cheng
Abstract:
To swim through a viscous fluid, a flagellated bacterium must overcome the fluid drag on its body by rotating a flagellum or a bundle of multiple flagella. Because the drag increases with the size of bacteria, it is expected theoretically that the swimming speed of a bacterium inversely correlates with its body length. Nevertheless, despite extensive research, the fundamental size-speed relation o…
▽ More
To swim through a viscous fluid, a flagellated bacterium must overcome the fluid drag on its body by rotating a flagellum or a bundle of multiple flagella. Because the drag increases with the size of bacteria, it is expected theoretically that the swimming speed of a bacterium inversely correlates with its body length. Nevertheless, despite extensive research, the fundamental size-speed relation of flagellated bacteria remains unclear with different experiments reporting conflicting results. Here, by critically reviewing the existing evidence and synergizing our own experiments of large sample sizes, hydrodynamic modeling and simulations, we demonstrate that the average swimming speed of \textit{Escherichia coli}, a premier model of peritrichous bacteria, is independent of their body length. Our quantitative analysis shows that such a counterintuitive relation is the consequence of the collective flagellar dynamics dictated by the linear correlation between the body length and the number of flagella of bacteria. Notably, our study reveals how bacteria utilize the increasing number of flagella to regulate the flagellar motor load. The collective load sharing among multiple flagella results in a lower load on each flagellar motor and therefore faster flagellar rotation, which compensates for the higher fluid drag on the longer bodies of bacteria. Without this balancing mechanism, the swimming speed of monotrichous bacteria generically decreases with increasing body length, a feature limiting the size variation of the bacteria. Altogether, our study resolves a long-standing controversy over the size-speed relation of flagellated bacteria and provides new insights into the functional benefit of multiflagellarity in bacteria.
△ Less
Submitted 24 October, 2023; v1 submitted 27 December, 2022;
originally announced December 2022.
-
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
J. P. Figueiredo de sa Sousa de Almeida,
P. G. Dias de Almeida,
A. Alpana,
M. Alyari,
I. Andreev,
U. Aras,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Banerjee,
P. DeBarbaro,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (435 additional authors not shown)
Abstract:
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med…
▽ More
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.
△ Less
Submitted 27 May, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Status and performance of the AMoRE-I experiment on neutrinoless double beta decay
Authors:
H. B. Kim,
D. H. Ha,
E. J. Jeon,
J. A. Jeon,
H. S. Jo,
C. S. Kang,
W. G. Kang,
H. S. Kim,
S. C. Kim,
S. G. Kim,
S. K. Kim,
S. R. Kim,
W. T. Kim,
Y. D. Kim,
Y. H. Kim,
D. H. Kwon,
E. S. Lee,
H. J. Lee,
H. S. Lee,
J. S. Lee,
M. H. Lee,
S. W. Lee,
Y. C. Lee,
D. S. Leonard,
H. S. Lim
, et al. (10 additional authors not shown)
Abstract:
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ cryst…
▽ More
AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ crystals and five Li$_2$$^{100}$MoO$_4$ crystals for a total crystal mass of 6.2 kg. Each detector module contains a scintillating crystal with two MMC channels for heat and light detection. We report the present status of the experiment and the performance of the detector modules.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
Probabilistic Prime Factorization based on Virtually Connected Boltzmann Machine and Probabilistic Annealing
Authors:
Hyundo Jung,
Hyun** Kim,
Woo** Lee,
**woo Jeon,
Yohan Choi,
Taehyeong Park,
Chulwoo Kim
Abstract:
Probabilistic computing has been introduced to operate functional networks using a probabilistic bit (p-bit), generating 0 or 1 probabilistically from its electrical input. In contrast to quantum computers, probabilistic computing enables the operation of adiabatic algorithms even at room temperature, and is expected to broaden computational abilities in non-deterministic polynomial searching and…
▽ More
Probabilistic computing has been introduced to operate functional networks using a probabilistic bit (p-bit), generating 0 or 1 probabilistically from its electrical input. In contrast to quantum computers, probabilistic computing enables the operation of adiabatic algorithms even at room temperature, and is expected to broaden computational abilities in non-deterministic polynomial searching and learning problems. However, previous developments of probabilistic machines have focused on emulating the operation of quantum computers similarly, implementing every p-bit with large weight-sum matrix multiplication blocks or requiring tens of times more p-bits than semiprime bits. Furthermore, previous probabilistic machines adopted the graph model of quantum computers for updating the hardware connections, which further increased the number of sampling operations. Here we introduce a digitally accelerated prime factorization machine with a virtually connected Boltzmann machine and probabilistic annealing method, designed to reduce the complexity and number of sampling operations to below those of previous probabilistic factorization machines. In 10-bit to 64-bit factorizations were performed to assess the effectiveness of the machine, and the machine offers 1.2 X 10^8 times improvement in the number of sampling operations compared with previous factorization machines, with a 22-fold smaller hardware resource. This work shows that probabilistic machines can be implemented in a cost-effective manner using a field-programmable gate array, and hence we suggest that probabilistic computers can be employed for solving various large NP searching problems in the near future.
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
-
Gate-tunable quantum pathways of high harmonic generation in graphene
Authors:
Soonyoung Cha,
Minjeong Kim,
Youngjae Kim,
Shinyoung Choi,
Sejong Kang,
Hoon Kim,
Sangho Yoon,
Gunho Moon,
Taeho Kim,
Ye Won Lee,
Gil Young Cho,
Moon Jeong Park,
Cheol-Joo Kim,
B. J. Kim,
JaeDong Lee,
Moon-Ho Jo,
Jonghwan Kim
Abstract:
Under strong laser fields, electrons in solids radiate high-harmonic fields by travelling through quantum pathways in Bloch bands in the sub-laser-cycle timescales. Understanding these pathways in the momentum space through the high-harmonic radiation can enable an all-optical ultrafast probe to observe coherent lightwave-driven processes and measure electronic structures as recently demonstrated…
▽ More
Under strong laser fields, electrons in solids radiate high-harmonic fields by travelling through quantum pathways in Bloch bands in the sub-laser-cycle timescales. Understanding these pathways in the momentum space through the high-harmonic radiation can enable an all-optical ultrafast probe to observe coherent lightwave-driven processes and measure electronic structures as recently demonstrated for semiconductors. However, such demonstration has been largely limited for semimetals because the absence of the bandgap hinders an experimental characterization of the exact pathways. In this study, by combining electrostatic control of chemical potentials with HHG measurement, we resolve quantum pathways of massless Dirac fermions in graphene under strong laser fields. Electrical modulation of HHG reveals quantum interference between the multi-photon interband excitation channels. As the light-matter interaction deviates beyond the perturbative regime, elliptically polarized laser fields efficiently drive massless Dirac fermions via an intricate coupling between the interband and intraband transitions, which is corroborated by our theoretical calculations. Our findings pave the way for strong-laser-field tomography of Dirac electrons in various quantum semimetals and their ultrafast electronics with a gate control.
△ Less
Submitted 16 October, 2022;
originally announced October 2022.
-
Input optics systems of the KAGRA detector during O3GK
Authors:
T. Akutsu,
M. Ando,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Bae,
Y. Bae,
L. Baiotti,
R. Bajpai,
M. A. Barton,
K. Cannon,
Z. Cao,
E. Capocasa,
M. Chan,
C. Chen,
K. Chen,
Y. Chen,
C-I. Chiang,
H. Chu,
Y-K. Chu,
S. Eguchi
, et al. (228 additional authors not shown)
Abstract:
KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensit…
▽ More
KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
Thin film notch filters as platforms for biological image processing
Authors:
Shaban B. Sulejman,
Niken Priscilla,
Lukas Wesemann,
Wendy S. L. Lee,
Jieqiong Lou,
Elizabeth Hinde,
Timothy J. Davis,
Ann Roberts
Abstract:
Many image processing operations involve the modification of the spatial frequency content of images. Here we demonstrate object-plane spatial frequency filtering utilizing the angular sensitivity of a commercial spectral bandstop filter. This approach to all-optical image processing is shown to generate real-time pseudo-3D images of transparent biological and other samples, such as human cervical…
▽ More
Many image processing operations involve the modification of the spatial frequency content of images. Here we demonstrate object-plane spatial frequency filtering utilizing the angular sensitivity of a commercial spectral bandstop filter. This approach to all-optical image processing is shown to generate real-time pseudo-3D images of transparent biological and other samples, such as human cervical cancer cells. This work demonstrates the potential of non-local, non-interferometric approaches to image processing for uses in label-free biological cell imaging and dynamical monitoring.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
Graph Neural Networks for Low-Energy Event Classification & Reconstruction in IceCube
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
N. Aggarwal,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
J. M. Alameddine,
A. A. Alves Jr.,
N. M. Amin,
K. Andeen,
T. Anderson,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker
, et al. (359 additional authors not shown)
Abstract:
IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challen…
▽ More
IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challenge due to the irregular detector geometry, inhomogeneous scattering and absorption of light in the ice and, below 100 GeV, the relatively low number of signal photons produced per event. To address this challenge, it is possible to represent IceCube events as point cloud graphs and use a Graph Neural Network (GNN) as the classification and reconstruction method. The GNN is capable of distinguishing neutrino events from cosmic-ray backgrounds, classifying different neutrino event types, and reconstructing the deposited energy, direction and interaction vertex. Based on simulation, we provide a comparison in the 1-100 GeV energy range to the current state-of-the-art maximum likelihood techniques used in current IceCube analyses, including the effects of known systematic uncertainties. For neutrino event classification, the GNN increases the signal efficiency by 18% at a fixed false positive rate (FPR), compared to current IceCube methods. Alternatively, the GNN offers a reduction of the FPR by over a factor 8 (to below half a percent) at a fixed signal efficiency. For the reconstruction of energy, direction, and interaction vertex, the resolution improves by an average of 13%-20% compared to current maximum likelihood techniques in the energy range of 1-30 GeV. The GNN, when run on a GPU, is capable of processing IceCube events at a rate nearly double of the median IceCube trigger rate of 2.7 kHz, which opens the possibility of using low energy neutrinos in online searches for transient events.
△ Less
Submitted 11 October, 2022; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Design of the ECCE Detector for the Electron Ion Collider
Authors:
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin,
R. Capobianco
, et al. (259 additional authors not shown)
Abstract:
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent track…
▽ More
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector.
△ Less
Submitted 11 May, 2023; v1 submitted 6 September, 2022;
originally announced September 2022.
-
Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept
Authors:
A. Bylinkin,
C. T. Dean,
S. Fegan,
D. Gangadharan,
K. Gates,
S. J. D. Kay,
I. Korover,
W. B. Li,
X. Li,
R. Montgomery,
D. Nguyen,
G. Penman,
J. R. Pybus,
N. Santiesteban,
R. Trotta,
A. Usman,
M. D. Baker,
J. Frantz,
D. I. Glazier,
D. W. Higinbotham,
T. Horn,
J. Huang,
G. Huber,
R. Reed,
J. Roche
, et al. (258 additional authors not shown)
Abstract:
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fr…
▽ More
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector.
△ Less
Submitted 6 March, 2023; v1 submitted 30 August, 2022;
originally announced August 2022.
-
Feature Identification in Complex Fluid Flows by Convolutional Neural Networks
Authors:
Shizheng Wen,
Michael W. Lee,
Kai M. Kruger Bastos,
Earl H. Dowell
Abstract:
Recent efforts have shown machine learning to be useful for the prediction of nonlinear fluid dynamics. Predictive accuracy is often a central motivation for employing neural networks, but the pattern recognition central to the network function is equally valuable for purposes of enhancing our dynamical insight into confounding dynamics. In this paper, convolutional neural networks (CNNs) were tra…
▽ More
Recent efforts have shown machine learning to be useful for the prediction of nonlinear fluid dynamics. Predictive accuracy is often a central motivation for employing neural networks, but the pattern recognition central to the network function is equally valuable for purposes of enhancing our dynamical insight into confounding dynamics. In this paper, convolutional neural networks (CNNs) were trained to recognize several qualitatively different subsonic buffet flows over a high-incidence airfoil, and a near-perfect accuracy was performed with only a small training dataset. The convolutional kernels and corresponding feature maps, developed by the model with no temporal information provided, identified large-scale coherent structures in agreement with those known to be associated with buffet flows. An approach named Gradient-weighted Class Activation Map** (Grad-CAM) was then applied to the trained model to indicate the importance of these feature maps in classification. Sensitivity to hyperparameters including network architecture and convolutional kernel size was also explored, and results show that smaller kernels are better at coherent structure identification than are larger kernels. A long-short term memory CNN was subsequently used to demonstrate that with the inclusion of temporal information, the coherent structures remained qualitatively comparable to those of the conventional CNN. The coherent structures identified by these models enhance our dynamical understanding of subsonic buffet over high-incidence airfoils over a wide range of Reynolds numbers.
△ Less
Submitted 20 August, 2022;
originally announced August 2022.
-
Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider
Authors:
X. Li,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin
, et al. (262 additional authors not shown)
Abstract:
The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will…
▽ More
The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region.
△ Less
Submitted 23 July, 2022; v1 submitted 21 July, 2022;
originally announced July 2022.
-
Exclusive J/$ψ$ Detection and Physics with ECCE
Authors:
X. Li,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin
, et al. (262 additional authors not shown)
Abstract:
Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the…
▽ More
Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE.
△ Less
Submitted 21 July, 2022;
originally announced July 2022.
-
Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider
Authors:
F. Bock,
N. Schmidt,
P. K. Wang,
N. Santiesteban,
T. Horn,
J. Huang,
J. Lajoie,
C. Munoz Camacho,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
W. Boeglin,
M. Borysova,
E. Brash
, et al. (263 additional authors not shown)
Abstract:
We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key…
▽ More
We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
Evaluation of the blackbody radiation shift of an Yb optical lattice clock at KRISS
Authors:
Myoung-Sun Heo,
Huidong Kim,
Dai-Hyuk Yu,
Won-Kyu Lee,
Chang Yong Park
Abstract:
As optical clocks are improved to reach the frequency uncertainty below the 10$^{-17}$ level, the frequency shift due to the blackbody radiation (BBR) has been one of the major systematic effects hindering further improvement. To evaluate the BBR shift of an Yb optical lattice clock at KRISS, we installed an in-vacuum BBR shield and made radiation thermometry using a black-coated-sphere thermal pr…
▽ More
As optical clocks are improved to reach the frequency uncertainty below the 10$^{-17}$ level, the frequency shift due to the blackbody radiation (BBR) has been one of the major systematic effects hindering further improvement. To evaluate the BBR shift of an Yb optical lattice clock at KRISS, we installed an in-vacuum BBR shield and made radiation thermometry using a black-coated-sphere thermal probe. After we quantitatively measured the conduction loss of the thermal probe and the effects of all the external radiation sources, we determined the temperature at the atom trap site with an uncertainty of 13 mK, which corresponds to an uncertainty of 0.22 mHz in the clock frequency (a fractional frequency of $4.2\times10^{-19}$). The total uncertainty of the BBR shift including the atomic response is $9.5\times10^{-19}$.
△ Less
Submitted 15 July, 2022;
originally announced July 2022.
-
Ion trap with gold-plated alumina: substrate and surface characterization
Authors:
Myunghun Kim,
Keumhyun Kim,
Jungsoo Hong,
Hyegoo Lee,
Youngil Moon,
Wonchan Lee,
Sehyun Kim,
Taekyun Ha,
Jae-Yoon Sim,
Moonjoo Lee
Abstract:
We describe a complete development process of a segmented-blade linear ion trap. Alumina substrate is characterized with an X-ray diffraction and loss-tangent measurement. The blade is laser-micromachined and polished, followed by the sputtering and gold electroplating. Surface roughness is examined at each step of the fabrication via both electron and optical microscopies. On the gold-plated face…
▽ More
We describe a complete development process of a segmented-blade linear ion trap. Alumina substrate is characterized with an X-ray diffraction and loss-tangent measurement. The blade is laser-micromachined and polished, followed by the sputtering and gold electroplating. Surface roughness is examined at each step of the fabrication via both electron and optical microscopies. On the gold-plated facet, we obtain a height deviation of tens of nanometers in the vicinity of the ion position. Trap** of laser-cooled $^{174}$Yb$^{+}$ ions is demonstrated.
△ Less
Submitted 26 December, 2022; v1 submitted 14 July, 2022;
originally announced July 2022.
-
Uneven Extraction in Coffee Brewing
Authors:
W. T. Lee,
A. Smith,
A. Arshad
Abstract:
A recent experiment showed that, contrary to theoretical predictions, beyond a cutoff point grinding coffee more finely results in lower extraction. One potential explanation for this is that fine grinding promotes non-uniform extraction in the coffee bed. We investigate the possibility that this could occur due the interaction between dissolution and flow promoting uneven extraction. A low dimens…
▽ More
A recent experiment showed that, contrary to theoretical predictions, beyond a cutoff point grinding coffee more finely results in lower extraction. One potential explanation for this is that fine grinding promotes non-uniform extraction in the coffee bed. We investigate the possibility that this could occur due the interaction between dissolution and flow promoting uneven extraction. A low dimensional model in which there are two possible pathways for flow is derived and analysed. This model shows that, below a critical grind size, there is a decreasing extraction with decreasing grind size as is seen experimentally. In the model this is due to a complicated interplay between an initial imbalance in the porosities and permeabilities of the two pathways which is increased by flow and extraction, leading to the complete extraction of all soluble coffee from one pathway.
△ Less
Submitted 7 April, 2023; v1 submitted 24 June, 2022;
originally announced June 2022.
-
Background-penalty-free waveguide enhancement of CARS signal in air-filled anti-resonance hollow-core fiber
Authors:
Aysan Bahari,
Kyle Sower,
Kai Wang,
Zehua Han,
James Florence,
Yingying Wang,
Shoufei Gao,
Ho Wai Howard Lee,
Marlan Scully,
Aleksei Zheltikov,
Alexei Sokolov
Abstract:
We study coherent anti-Stokes Raman spectroscopy in air-filled anti-resonance hollow-core photonic crystal fiber, otherwise known as 'revolver' fiber. We compare the vibrational coherent anti-Stokes Raman signal of N$_2$, at 2331 cm$^{-1}$, generated in ambient air (no fiber present), with the one generated in a 2.96 cm of a revolver fiber. We show a 170 times enhancement for the signal produced i…
▽ More
We study coherent anti-Stokes Raman spectroscopy in air-filled anti-resonance hollow-core photonic crystal fiber, otherwise known as 'revolver' fiber. We compare the vibrational coherent anti-Stokes Raman signal of N$_2$, at 2331 cm$^{-1}$, generated in ambient air (no fiber present), with the one generated in a 2.96 cm of a revolver fiber. We show a 170 times enhancement for the signal produced in the fiber, due to an increased interaction path. Remarkably, the N$_2$ signal obtained in the revolver fiber shows near-zero non-resonant background, due to near-zero overlap between the laser field and the fiber cladding. Through our study, we find that the revolver fiber properties make it an ideal candidate for the coherent Raman spectroscopy signal enhancement.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
The Kinetic Energy of PAH Dication and Trication Dissociation Determined by Recoil-Frame Covariance Map Imaging
Authors:
Jason W. L. Lee,
Denis S. Tikhonov,
Felix Allum,
Rebecca Boll,
Pragya Chopra,
Benjamin Erk,
Sebastian Gruet,
Lanhai He,
David Heathcote,
Mehdi M. Kazemi,
Jan Lahl,
Alexander K. Lemmens,
Donatella Loru,
Sylvain Maclot,
Robert Mason,
Erland Müller,
Terry Mullins,
Christopher Passow,
Jasper Peschel,
Daniel Ramm,
Amanda L. Steber,
Sadia Bari,
Mark Brouard,
Michael Burt,
Jochen Küpper
, et al. (6 additional authors not shown)
Abstract:
We investigated the dissociation of dications and trications of three polycyclic aromatic hydrocarbons (PAHs), fluorene, phenanthrene, and pyrene. PAHs are a family of molecules ubiquitous in space and involved in much of the chemistry of the interstellar medium. In our experiments, ions are formed by interaction with 30.3 nm extreme ultraviolet (XUV) photons, and their velocity map images are rec…
▽ More
We investigated the dissociation of dications and trications of three polycyclic aromatic hydrocarbons (PAHs), fluorene, phenanthrene, and pyrene. PAHs are a family of molecules ubiquitous in space and involved in much of the chemistry of the interstellar medium. In our experiments, ions are formed by interaction with 30.3 nm extreme ultraviolet (XUV) photons, and their velocity map images are recorded using a PImMS2 multi-mass imaging sensor. Application of recoil-frame covariance analysis allows the total kinetic energy release (TKER) associated with multiple fragmentation channels to be determined to high precision, ranging 1.94-2.60 eV and 2.95-5.29 eV for the dications and trications, respectively. Experimental measurements are supported by Born-Oppenheimer molecular dynamics (BOMD) simulations.
△ Less
Submitted 17 June, 2022;
originally announced June 2022.
-
Gamma/Hadron Separation with the HAWC Observatory
Authors:
R. Alfaro,
C. Alvarez,
J. D. Álvarez,
J. R. Angeles Camacho,
J. C. Arteaga-Velázquez,
D. Avila Rojas,
H. A. Ayala Solares,
R. Babu,
E. Belmont-Moreno,
C. Brisbois,
K. S. Caballero-Mora,
T. Capistrán,
A. Carramiñana,
S. Casanova,
O. Chaparro-Amaro,
U. Cotti,
J. Cotzomi,
S. Coutiño de León,
E. De la Fuente,
C. de León,
R. Diaz Hernandez,
B. L. Dingus,
M. A. DuVernois,
M. Durocher,
J. C. Díaz-Vélez
, et al. (68 additional authors not shown)
Abstract:
The High Altitude Water Cherenkov (HAWC) gamma-ray observatory observes atmospheric showers produced by incident gamma rays and cosmic rays with energy from 300 GeV to more than 100 TeV. A crucial phase in analyzing gamma-ray sources using ground-based gamma-ray detectors like HAWC is to identify the showers produced by gamma rays or hadrons. The HAWC observatory records roughly 25,000 events per…
▽ More
The High Altitude Water Cherenkov (HAWC) gamma-ray observatory observes atmospheric showers produced by incident gamma rays and cosmic rays with energy from 300 GeV to more than 100 TeV. A crucial phase in analyzing gamma-ray sources using ground-based gamma-ray detectors like HAWC is to identify the showers produced by gamma rays or hadrons. The HAWC observatory records roughly 25,000 events per second, with hadrons representing the vast majority ($>99.9\%$) of these events. The standard gamma/hadron separation technique in HAWC uses a simple rectangular cut involving only two parameters. This work describes the implementation of more sophisticated gamma/hadron separation techniques, via machine learning methods (boosted decision trees and neural networks), and summarizes the resulting improvements in gamma/hadron separation obtained in HAWC.
△ Less
Submitted 24 May, 2022;
originally announced May 2022.
-
AI-assisted Optimization of the ECCE Tracking System at the Electron Ion Collider
Authors:
C. Fanelli,
Z. Papandreou,
K. Suresh,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann
, et al. (258 additional authors not shown)
Abstract:
The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to…
▽ More
The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5T solenoid. The EIC detector proposal review concluded that the ECCE design will serve as the reference design for an EIC detector. Herein we describe a comprehensive optimization of the ECCE tracker using AI. The work required a complex parametrization of the simulated detector system. Our approach dealt with an optimization problem in a multidimensional design space driven by multiple objectives that encode the detector performance, while satisfying several mechanical constraints. We describe our strategy and show results obtained for the ECCE tracking system. The AI-assisted design is agnostic to the simulation framework and can be extended to other sub-detectors or to a system of sub-detectors to further optimize the performance of the EIC detector.
△ Less
Submitted 19 May, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Scientific Computing Plan for the ECCE Detector at the Electron Ion Collider
Authors:
J. C. Bernauer,
C. T. Dean,
C. Fanelli,
J. Huang,
K. Kauder,
D. Lawrence,
J. D. Osborn,
C. Paus,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash
, et al. (256 additional authors not shown)
Abstract:
The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing thes…
▽ More
The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required for the future of ECCE are described.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Ultrafast disinfection of SARS-CoV-2 viruses
Authors:
Yang Xu,
Alex Wing Hong Chin,
Haosong Zhong,
Connie Kong Wai Lee,
Yi Chen,
Timothy Yee Him Chan,
Zhiyong Fan,
Molong Duan,
Leo Lit Man Poon,
Mitch Guijun Li
Abstract:
The wide use of surgical masks has been proven effective for mitigating the spread of respiration diseases, such as COVID-19, alongside social distance control, vaccines, and other efforts. With the newly reported variants, such as Delta and Omicron, a higher spread rate had been found compared to the initial strains. People might get infected even by inhaling fewer loading of viruses. More freque…
▽ More
The wide use of surgical masks has been proven effective for mitigating the spread of respiration diseases, such as COVID-19, alongside social distance control, vaccines, and other efforts. With the newly reported variants, such as Delta and Omicron, a higher spread rate had been found compared to the initial strains. People might get infected even by inhaling fewer loading of viruses. More frequent sterilization of surgical masks is needed to protect the wearers. However, it is challenging to sterilize the commodity surgical masks with a fast and effective method. Herein, we reported the sterilization of the SARS-CoV-2 viruses within an ultra-short time, while retaining the mask performance. Silver thin film is coated on commercial polyimide film by physical vapor deposition and patterned by laser scribing to form a Joule heating electrode. Another layer of the gold thin film was coated onto the opposite side of the device to promote the uniformity of the Joule heating through nano-heat transfer regulation. As a result, the surgical mask can be heated to inactivation temperature within a short time and with high uniformity. By Joule-heating the surgical mask with the temperature at 90 °C for 3 minutes, the inactivation of the SARS-CoV-2 showed an efficacy of 99.89%. Normal commodity surgical masks can be sterilized faster, more frequently, and efficiently against SARS-CoV-2 viruses and the new invariants.
△ Less
Submitted 17 April, 2022;
originally announced April 2022.
-
Low Energy Event Reconstruction in IceCube DeepCore
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
J. M. Alameddine,
A. A. Alves Jr.,
N. M. Amin,
K. Andeen,
T. Anderson,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Axani,
X. Bai,
A. Balagopal V.,
S. W. Barwick,
B. Bastian,
V. Basu,
S. Baur,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus
, et al. (360 additional authors not shown)
Abstract:
The reconstruction of event-level information, such as the direction or energy of a neutrino interacting in IceCube DeepCore, is a crucial ingredient to many physics analyses. Algorithms to extract this high level information from the detector's raw data have been successfully developed and used for high energy events. In this work, we address unique challenges associated with the reconstruction o…
▽ More
The reconstruction of event-level information, such as the direction or energy of a neutrino interacting in IceCube DeepCore, is a crucial ingredient to many physics analyses. Algorithms to extract this high level information from the detector's raw data have been successfully developed and used for high energy events. In this work, we address unique challenges associated with the reconstruction of lower energy events in the range of a few to hundreds of GeV and present two separate, state-of-the-art algorithms. One algorithm focuses on the fast directional reconstruction of events based on unscattered light. The second algorithm is a likelihood-based multipurpose reconstruction offering superior resolutions, at the expense of larger computational cost.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Optimal Layout Plan of Stands at the Macao Food Festival via Minimizing the Electrostatic Potential Energy with the Effective Charge as Popularity of Stands
Authors:
Ka Ian Im,
In Kio Choi,
Pak Kio Lei,
Hou Fai Chan,
U In Ian,
Wei Shan Lee
Abstract:
We proposed a mathematical model for designing the layout diagram of stand locations at the Macao Food Festival. The optimal layout diagram may be defined in such a way that, while requiring the distance between every pair of stands should not be too far away from each other, the crowd control is well managed so that people may patronize stands more effectively. More popular stands may have larger…
▽ More
We proposed a mathematical model for designing the layout diagram of stand locations at the Macao Food Festival. The optimal layout diagram may be defined in such a way that, while requiring the distance between every pair of stands should not be too far away from each other, the crowd control is well managed so that people may patronize stands more effectively. More popular stands may have larger patronage, resulting in higher pedestrian flow nearby. Therefore, to avoid customers from packing shoulder to shoulder around more popular stands, we may treat every stand as a charged particle carrying an effective charge: the more popular a stand is, the higher the effective charge it carries. Under this assumption, the problem is then converted to the minimization problem of Coulomb electrostatic potential energy on a specific configuration of charge locations, with which the global minimum may be found by the Simulated Annealing and Metropolis Algorithm. Electrostatic energy density is interpreted as density of customers, while electric field the reversed crowd flow. Therefore, at a certain location we are able to predict the customer density by calculating the energy density and the net crowd flow with electric field lines. We also concluded that even though the required computation time to obtain a configuration of stand locations with the energy value close to the global minimum with a tolerable difference may be irrelevant to the randomly generated initial configuration of stand locations, setting up an appropriate initial configuration could be one of the key issues to find out the actual global minimum.
△ Less
Submitted 16 February, 2022; v1 submitted 17 January, 2022;
originally announced January 2022.
-
Femtotesla nearly quantum-noise-limited pulsed gradiometer at Earth-scale fields
Authors:
V. G. Lucivero,
W. Lee,
M. V. Romalis,
M. E. Limes,
E. L. Foley,
T. W. Kornack
Abstract:
We describe a finite fields magnetic gradiometer using an intense pulsed laser to polarize a $^{87}$Rb atomic ensemble and a compact VCSEL probe laser to detect paramagnetic Faraday rotation in a single multipass cell. We report differential magnetic sensitivity of $14$ fT/Hz$^{1/2}$ over a broad dynamic range including Earth's field magnitude and common-mode rejection ratio higher than $10^4$. We…
▽ More
We describe a finite fields magnetic gradiometer using an intense pulsed laser to polarize a $^{87}$Rb atomic ensemble and a compact VCSEL probe laser to detect paramagnetic Faraday rotation in a single multipass cell. We report differential magnetic sensitivity of $14$ fT/Hz$^{1/2}$ over a broad dynamic range including Earth's field magnitude and common-mode rejection ratio higher than $10^4$. We also observe a nearly quantum-noise-limited behaviour of the gradiometer, by comparing the experimental standard deviation of the estimated frequency difference against the Cramér-Rao lower bound in the presence of white photon shot-noise, atomic spin noise and atomic diffusion.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.