-
Vernier Microcombs for Integrated Optical Atomic Clocks
Authors:
Kaiyi Wu,
Nathan P. O'Malley,
Saleha Fatema,
Cong Wang,
Marcello Girardi,
Mohammed S. Alshaykh,
Zhichao Ye,
Daniel E. Leaird,
Minghao Qi,
Victor Torres-Company,
Andrew M. Weiner
Abstract:
CMOS-compatible Kerr microcombs have drawn substantial interest as mass-manufacturable, compact alternatives to bulk frequency combs. This could enable deployment of many comb-reliant applications previously confined to laboratories. Particularly enticing is the prospect of microcombs performing optical frequency division in compact optical atomic clocks. Unfortunately, it is difficult to meet the…
▽ More
CMOS-compatible Kerr microcombs have drawn substantial interest as mass-manufacturable, compact alternatives to bulk frequency combs. This could enable deployment of many comb-reliant applications previously confined to laboratories. Particularly enticing is the prospect of microcombs performing optical frequency division in compact optical atomic clocks. Unfortunately, it is difficult to meet the self-referencing requirement of microcombs in these systems due to the $\sim$THz repetition rates typically required for octave-spanning comb generation. Additionally, it is challenging to spectrally engineer a microcomb system to align a comb mode with an atomic clock transition with sufficient signal-to-noise ratio. Here, we adopt a Vernier dual-microcomb scheme for optical frequency division of a stabilized ultranarrow-linewidth continuous-wave laser at 871 nm to a $\sim$235 MHz output frequency. In addition to enabling measurement of the comb repetition rates, this scheme brings the freedom to pick comb lines from either or both of the combs. We exploit this flexibility to shift an ultra-high-frequency ($\sim$100 GHz) carrier-envelope offset beat down to frequencies where detection is possible and to place a comb line close to the 871 nm laser - tuned so that if frequency-doubled it would fall close to the clock transition in $^{171}$Yb$^+$. Moreover, we introduce a novel scheme which suppresses frequency noise arising from interferometric phase fluctuations in our dual-comb system and reduces the frequency instability down to our measurement limit. Our dual-comb system can potentially combine with an integrated ion trap toward future chip-scale optical atomic clocks.
△ Less
Submitted 21 September, 2023; v1 submitted 17 August, 2023;
originally announced August 2023.
-
Architecture for Integrated RF Photonic Downconversion of Electronic Signals
Authors:
Nathan P. O'Malley,
Keith A. Mckinzie,
Mohammed S. Alshaykh,
Junqiu Liu,
Daniel E. Leaird,
Tobias J. Kippenberg,
Jason D. Mckinney,
Andrew M. Weiner
Abstract:
Electronic analog to digital converters (ADCs) are running up against the well-known bit depth vs bandwidth tradeoff. Towards this end, RF photonic-enhanced ADCs have been the subject of interest for some time. Optical frequency comb technology has been used as a workhorse underlying many of these architectures. Unfortunately, such designs must generally grapple with SWaP concerns, as well as freq…
▽ More
Electronic analog to digital converters (ADCs) are running up against the well-known bit depth vs bandwidth tradeoff. Towards this end, RF photonic-enhanced ADCs have been the subject of interest for some time. Optical frequency comb technology has been used as a workhorse underlying many of these architectures. Unfortunately, such designs must generally grapple with SWaP concerns, as well as frequency ambiguity issues which threaten to obscure critical spectral information of detected RF signals. In this work, we address these concerns via an RF photonic downconverter with potential for easy integration and field deployment by leveraging a novel hybrid microcomb / electro-optic comb design.
△ Less
Submitted 25 January, 2023; v1 submitted 15 September, 2022;
originally announced September 2022.
-
High-dimensional discrete Fourier transform gates with the quantum frequency processor
Authors:
Hsuan-Hao Lu,
Navin B. Lingaraju,
Daniel E. Leaird,
Andrew M. Weiner,
Joseph M. Lukens
Abstract:
The discrete Fourier transform (DFT) is of fundamental interest in photonic quantum information, yet the ability to scale it to high dimensions depends heavily on the physical encoding, with practical recipes lacking in emerging platforms such as frequency bins. In this Letter, we show that d-point frequency-bin DFTs can be realized with a fixed three-component quantum frequency processor (QFP), s…
▽ More
The discrete Fourier transform (DFT) is of fundamental interest in photonic quantum information, yet the ability to scale it to high dimensions depends heavily on the physical encoding, with practical recipes lacking in emerging platforms such as frequency bins. In this Letter, we show that d-point frequency-bin DFTs can be realized with a fixed three-component quantum frequency processor (QFP), simply by adding to the electro-optic modulation signals one radio-frequency harmonic per each incremental increase in d. We verify gate fidelity F > 0.9997 and success probability P > 0.965 up to d = 10 in numerical simulations, and experimentally implement the solution for d = 3, utilizing measurements with parallel DFTs to quantify entanglement and perform full tomography of multiple two-photon frequency-bin states. Our results furnish new opportunities for high-dimensional frequency-bin protocols in quantum communications and networking.
△ Less
Submitted 26 January, 2022;
originally announced January 2022.
-
Bell state analyzer for spectrally distinct photons
Authors:
Navin B. Lingaraju,
Hsuan-Hao Lu,
Daniel E. Leaird,
Steven Estrella,
Joseph M. Lukens,
Andrew M. Weiner
Abstract:
We demonstrate a Bell state analyzer that operates directly on frequency mismatch. Based on electro-optic modulators and Fourier-transform pulse shapers, our quantum frequency processor design implements interleaved Hadamard gates in discrete frequency modes. Experimental tests on entangled-photon inputs reveal accuracies of $\sim$98\% for discriminating between the $|Ψ^+\rangle$ and…
▽ More
We demonstrate a Bell state analyzer that operates directly on frequency mismatch. Based on electro-optic modulators and Fourier-transform pulse shapers, our quantum frequency processor design implements interleaved Hadamard gates in discrete frequency modes. Experimental tests on entangled-photon inputs reveal accuracies of $\sim$98\% for discriminating between the $|Ψ^+\rangle$ and $|Ψ^-\rangle$ frequency-bin Bell states. Our approach resolves the tension between wavelength-multiplexed state transport and high-fidelity Bell state measurements, which typically require spectral indistinguishability.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
Bayesian tomography of high-dimensional on-chip biphoton frequency combs with randomized measurements
Authors:
Hsuan-Hao Lu,
Karthik V. Myilswamy,
Ryan S. Bennink,
Suparna Seshadri,
Mohammed S. Alshaykh,
Junqiu Liu,
Tobias J. Kippenberg,
Daniel E. Leaird,
Andrew M. Weiner,
Joseph M. Lukens
Abstract:
Owing in large part to the advent of integrated biphoton frequency combs (BFCs), recent years have witnessed increased attention to quantum information processing in the frequency domain for its inherent high dimensionality and entanglement compatible with fiber-optic networks. Quantum state tomography (QST) of such states, however, has required complex and precise engineering of active frequency…
▽ More
Owing in large part to the advent of integrated biphoton frequency combs (BFCs), recent years have witnessed increased attention to quantum information processing in the frequency domain for its inherent high dimensionality and entanglement compatible with fiber-optic networks. Quantum state tomography (QST) of such states, however, has required complex and precise engineering of active frequency mixing operations, which are difficult to scale. To address these limitations, we propose a novel solution that employs a pulse shaper and electro-optic phase modulator (EOM) to perform random operations instead of mixing in a prescribed manner. We successfully verify the entanglement and reconstruct the full density matrix of BFCs generated from an on-chip Si$_{3}$N$_{4}$ microring resonator(MRR) in up to an $8\times8$-dimensional two-qudit Hilbert space, the highest dimension to date for frequency bins. More generally, our employed Bayesian statistical model can be tailored to a variety of quantum systems with restricted measurement capabilities, forming an opportunistic tomographic framework that utilizes all available data in an optimal way.
△ Less
Submitted 24 January, 2022; v1 submitted 9 August, 2021;
originally announced August 2021.
-
Adaptive bandwidth management for entanglement distribution in quantum networks
Authors:
Navin B. Lingaraju,
Hsuan-Hao Lu,
Suparna Seshadri,
Daniel E. Leaird,
Andrew M. Weiner,
Joseph M. Lukens
Abstract:
Flexible-grid wavelength-division multiplexing is a powerful tool in lightwave communications for maximizing spectral efficiency. In the emerging field of quantum networking, the need for effective resource provisioning is particularly acute, given the generally lower power levels, higher sensitivity to loss, and inapplicability of digital error correction. In this Letter, we leverage flex-grid te…
▽ More
Flexible-grid wavelength-division multiplexing is a powerful tool in lightwave communications for maximizing spectral efficiency. In the emerging field of quantum networking, the need for effective resource provisioning is particularly acute, given the generally lower power levels, higher sensitivity to loss, and inapplicability of digital error correction. In this Letter, we leverage flex-grid technology to demonstrate reconfigurable distribution of quantum entanglement in a four-user tabletop network. By adaptively partitioning bandwidth with a single wavelength-selective switch, we successfully equalize two-party coincidence rates that initially differ by over two orders of magnitude. Our scalable approach introduces loss that is fixed with the number of users, offering a practical path for the establishment and management of quality-of-service guarantees in large quantum networks.
△ Less
Submitted 20 October, 2020;
originally announced October 2020.
-
Switching dynamics of dark-pulse Kerr comb states in optical microresonators
Authors:
Elham Nazemosadat,
Attila Fülöp,
Óskar B. Helgason,
Pei-Hsun Wang,
Yi Xuan,
Dan E. Leaird,
Minghao Qi,
Enrique Silvestre,
Andrew M. Weiner,
Victor Torres-Company
Abstract:
Dissipative Kerr solitons are localized structures that exist in optical microresonators. They lead to the formation of microcombs --- chip-scale frequency combs that could facilitate precision frequency synthesis and metrology by capitalizing on advances in silicon photonics. Previous demonstrations have mainly focused on anomalous dispersion microresonators. Notwithstanding, localized structures…
▽ More
Dissipative Kerr solitons are localized structures that exist in optical microresonators. They lead to the formation of microcombs --- chip-scale frequency combs that could facilitate precision frequency synthesis and metrology by capitalizing on advances in silicon photonics. Previous demonstrations have mainly focused on anomalous dispersion microresonators. Notwithstanding, localized structures also exist in the normal dispersion regime in the form of circulating dark pulses, but their physical dynamics is far from being understood. Here, we report the discovery of reversible switching between coherent dark-pulse Kerr combs, whereby distinct states can be accessed deterministically. Furthermore, we reveal that the formation of dark-pulse Kerr combs is associated with the appearance of a new resonance, a feature that has never been observed for dark-pulses and is ascribed to soliton behavior. These results contribute to understanding the nonlinear physics in few-mode microresonators and provide insight into the generation of microcombs with high conversion efficiency.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Quantum frequency combs and Hong-Ou-Mandel interferometry: the role of spectral phase coherence
Authors:
Navin B. Lingaraju,
Hsuan-Hao Lu,
Suparna Seshadri,
Poolad Imany,
Daniel E. Leaird,
Joseph M. Lukens,
Andrew M. Weiner
Abstract:
The Hong-Ou-Mandel interferometer is a versatile tool for analyzing the joint properties of photon pairs, relying on a truly quantum interference effect between two-photon probability amplitudes. While the theory behind this form of two-photon interferometry is well established, the development of advanced photon sources and exotic two-photon states has highlighted the importance of quantifying pr…
▽ More
The Hong-Ou-Mandel interferometer is a versatile tool for analyzing the joint properties of photon pairs, relying on a truly quantum interference effect between two-photon probability amplitudes. While the theory behind this form of two-photon interferometry is well established, the development of advanced photon sources and exotic two-photon states has highlighted the importance of quantifying precisely what information can and cannot be inferred from features in a Hong-Ou-Mandel interference trace. Here we examine Hong-Ou-Mandel interference with regard to a particular class of states, so-called quantum frequency combs, and place special emphasis on the role spectral phase plays in these measurements. We find that this form of two-photon interferometry is insensitive to the relative phase between different comb line pairs. This is true even when different comb line pairs are mutually coherent at the input of a Hong-Ou-Mandel interferometer, and the fringe patterns display sharp temporal features. Consequently, Hong-Ou-Mandel interference cannot speak to the presence of high-dimensional frequency-bin entanglement in two-photon quantum frequency combs.
△ Less
Submitted 30 September, 2019;
originally announced September 2019.
-
Polarization diversity phase modulator for measuring frequency-bin entanglement of a biphoton frequency comb in a depolarized channel
Authors:
Oscar E. Sandoval,
Navin B. Lingaraju,
Poolad Imany,
Daniel E. Leaird,
Michael Brodsky,
Andrew M. Weiner
Abstract:
Phase modulation has emerged as a technique to create and manipulate high-dimensional frequency-bin entanglement. A necessary step to extending this technique to depolarized channels, such as those in a quantum networking environment, is the ability to perform phase modulation independent of photon polarization. This also necessary to harness hypertanglement in the polarization and frequency degre…
▽ More
Phase modulation has emerged as a technique to create and manipulate high-dimensional frequency-bin entanglement. A necessary step to extending this technique to depolarized channels, such as those in a quantum networking environment, is the ability to perform phase modulation independent of photon polarization. This also necessary to harness hypertanglement in the polarization and frequency degrees of freedom for operations like Bell state discrimination. However, practical phase modulators are generally sensitive to the polarization of light and this makes them unsuited to such applications. We overcome this limitation by implementing a polarization diversity scheme to measure frequency-bin entanglement in arbitrarily polarized photon pairs.
△ Less
Submitted 7 December, 2018;
originally announced December 2018.
-
High-order coherent communications using mode-locked dark-pulse Kerr combs from microresonators
Authors:
Attila Fülöp,
Mikael Mazur,
Abel Lorences-Riesgo,
Pei-Hsun Wang,
Yi Xuan,
Dan. E. Leaird,
Minghao Qi,
Peter A. Andrekson,
Andrew M. Weiner,
Victor Torres-Company
Abstract:
Microresonator frequency combs harness the nonlinear Kerr effect in an integrated optical cavity to generate a multitude of phase-locked frequency lines. The line spacing can reach values in the order of 100 GHz, making it an attractive multi-wavelength light source for applications in fiber-optic communications. Depending on the dispersion of the microresonator, different physical dynamics have b…
▽ More
Microresonator frequency combs harness the nonlinear Kerr effect in an integrated optical cavity to generate a multitude of phase-locked frequency lines. The line spacing can reach values in the order of 100 GHz, making it an attractive multi-wavelength light source for applications in fiber-optic communications. Depending on the dispersion of the microresonator, different physical dynamics have been observed. A recently discovered comb state corresponds to the formation of mode-locked dark pulses in a normal-dispersion microcavity. Such dark-pulse combs are particularly compelling for advanced coherent communications since they display unusually high power conversion efficiency. Here, we report the first coherent transmission experiments using 64-quadrature amplitude modulation encoded onto the frequency lines of a dark-pulse comb. The high conversion efficiency of the comb enables transmitted optical signal-to-noise ratios above 33 dB while maintaining a laser pump power level compatible with state-of-the-art hybrid silicon lasers.
△ Less
Submitted 10 January, 2018;
originally announced January 2018.
-
Electro-Optic Frequency Beamsplitters and Tritters for High-Fidelity Photonic Quantum Information Processing
Authors:
Hsuan-Hao Lu,
Joseph M. Lukens,
Nicholas A. Peters,
Ogaga D. Odele,
Daniel E. Leaird,
Andrew M. Weiner,
Pavel Lougovski
Abstract:
We report experimental realization of high-fidelity photonic quantum gates for frequency-encoded qubits and qutrits based on electro-optic modulation and Fourier-transform pulse sha**. Our frequency version of the Hadamard gate offers near-unity fidelity ($0.99998\pm0.00003$), requires only a single microwave drive tone for near-ideal performance, functions across the entire C-band (1530-1570 nm…
▽ More
We report experimental realization of high-fidelity photonic quantum gates for frequency-encoded qubits and qutrits based on electro-optic modulation and Fourier-transform pulse sha**. Our frequency version of the Hadamard gate offers near-unity fidelity ($0.99998\pm0.00003$), requires only a single microwave drive tone for near-ideal performance, functions across the entire C-band (1530-1570 nm), and can operate concurrently on multiple qubits spaced as tightly as four frequency modes apart, with no observable degradation in the fidelity. For qutrits we implement a $3\times 3$ extension of the Hadamard gate: the balanced tritter. This tritter---the first ever demonstrated for frequency modes---attains fidelity $0.9989\pm0.0004$. These gates represent important building blocks toward scalable, high-fidelity quantum information processing based on frequency encoding.
△ Less
Submitted 11 December, 2017;
originally announced December 2017.
-
Dark breathers in a normal dispersion optical microresonator
Authors:
Chengying Bao,
Yi Xuan,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
Breathers are localized waves, that are periodic in time or space. The concept of breathers is useful for describing many physical systems including granular lattices, Bose-Einstein condensation, hydrodynamics, plasmas and optics. Breathers could exist in both the anomalous and the normal dispersion regime. However, the demonstration of optical breathers in the normal dispersion regime remains elu…
▽ More
Breathers are localized waves, that are periodic in time or space. The concept of breathers is useful for describing many physical systems including granular lattices, Bose-Einstein condensation, hydrodynamics, plasmas and optics. Breathers could exist in both the anomalous and the normal dispersion regime. However, the demonstration of optical breathers in the normal dispersion regime remains elusive to our knowledge. Kerr comb generation in optical microresonators provides an array of oscillators that are highly coupled via the Kerr effect, which can be exploited to explore the breather dynamics. Here, we present, experimentally and numerically, the observation of dark breathers in a normal dispersion silicon nitride microresonator. By controlling the pump wavelength and power, we can generate the dark breather, which exhibits an energy exchange between the central lines and the lines at the wing. The dark breather breathes gently and retains a dark-pulse waveform. A transition to a chaotic breather state is also observed by increasing the pump power. These dark breather dynamics are well reproduced by numerical simulations based on the Lugiato-Lefever equation. The results also reveal the importance of dissipation to dark breather dynamics and give important insights into instabilities related to high power dark pulse Kerr combs from normal dispersion microreosnators.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
High-dimensional frequency-bin entangled photons in an optical microresonator on a chip
Authors:
Poolad Imany,
Jose A. Jaramillo-Villegas,
Ogaga D. Odele,
Kyunghun Han,
Daniel E. Leaird,
Joseph M. Lukens,
Pavel Lougovski,
Minghao Qi,
Andrew M. Weiner
Abstract:
Quantum frequency combs from chip-scale integrated sources are promising candidates for scalable and robust quantum information processing (QIP). However, to use these quantum combs for frequency domain QIP, demonstration of entanglement in the frequency basis, showing that the entangled photons are in a coherent superposition of multiple frequency bins, is required. We present a verification of q…
▽ More
Quantum frequency combs from chip-scale integrated sources are promising candidates for scalable and robust quantum information processing (QIP). However, to use these quantum combs for frequency domain QIP, demonstration of entanglement in the frequency basis, showing that the entangled photons are in a coherent superposition of multiple frequency bins, is required. We present a verification of qubit and qutrit frequency-bin entanglement using an on-chip quantum frequency comb with 40 mode pairs, through a two-photon interference measurement that is based on electro-optic phase modulation. Our demonstrations provide an important contribution in establishing integrated optical microresonators as a source for high-dimensional frequency-bin encoded quantum computing, as well as dense quantum key distribution.
△ Less
Submitted 18 January, 2018; v1 submitted 7 July, 2017;
originally announced July 2017.
-
Long-haul coherent communications using microresonator-based frequency combs
Authors:
Attila Fülöp,
Mikael Mazur,
Abel Lorences-Riesgo,
Tobias A. Eriksson,
Pei-Hsun Wang,
Yi Xuan,
Dan E. Leaird,
Minghao Qi,
Peter A. Andrekson,
Andrew M. Weiner,
Victor Torres-Company
Abstract:
Microresonator-based frequency combs are strong contenders as light sources for wavelength-division multiplexing (WDM). Recent demonstrations have shown the potential of microresonator combs for replacing tens of WDM lasers with a single laser-pumped device. These experiments relied on microresonators displaying anomalous dispersion. Devices operating in the normal dispersion offer the prospect of…
▽ More
Microresonator-based frequency combs are strong contenders as light sources for wavelength-division multiplexing (WDM). Recent demonstrations have shown the potential of microresonator combs for replacing tens of WDM lasers with a single laser-pumped device. These experiments relied on microresonators displaying anomalous dispersion. Devices operating in the normal dispersion offer the prospect of attaining high power conversion efficiency - an aspect that will be crucial in the future for enabling energy-efficient coherent communications with higher order modulation formats or lighting several spatial channels in space-division multiplexing. Here we report the experimental demonstration of coherent communications using normal dispersion microresonator combs. With polarization multiplexed (PM) quadrature phase-shift keying, we transmitted data over more than 6300 km in single-mode fiber. In a second experiment, we reached beyond 700 km with PM 16 quadrature amplitude modulation format and an aggregate data rate above 900 Gbit/s assuming 6% error correction overhead. These results represent the longest fiber transmission ever achieved using an integrated comb source.
△ Less
Submitted 30 January, 2017;
originally announced January 2017.
-
Thermo-Optical Chaos and Direct Soliton Generation in Microresonators
Authors:
Chengying Bao,
Yi Xuan,
Jose A. Jaramillo-Villegas,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We investigate, numerically and experimentally, the effect of thermo-optical (TO) chaos on direct soliton generation (DSG) in microresonators. When the pump laser is scanned from blue to red and then stopped at a fixed wavelength, we find that the solitons generated sometimes remain (survive) and sometimes annihilate subsequent to the end of the scan. We refer to the possibility of these different…
▽ More
We investigate, numerically and experimentally, the effect of thermo-optical (TO) chaos on direct soliton generation (DSG) in microresonators. When the pump laser is scanned from blue to red and then stopped at a fixed wavelength, we find that the solitons generated sometimes remain (survive) and sometimes annihilate subsequent to the end of the scan. We refer to the possibility of these different outcomes arising under identical laser scan conditions as coexistence of soliton annihilation and survival. Numerical simulations that include the thermal dynamics show that the coexistence of soliton annihilation and survival is explained by TO chaos accompanying comb generation. The random fluctuations of the cavity resonance occurring under TO chaos are also found to trigger spontaneous soliton generation after the laser scan ends. The coexistence of soliton annihilation and survival as well as spontaneous soliton generation are observed experimentally in a silicon-nitride microresonator. The elucidation of the role of TO chaos provides important insights into the soliton generation dynamics in microresonators, which may eventually facilitate straightforward soliton generation in fully-integrated microresonators.
△ Less
Submitted 12 January, 2017;
originally announced January 2017.
-
Directly stabilized solitons in silicon-nitride microresonators
Authors:
Chengying Bao,
Yi Xuan,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
We investigate soliton generation dynamics with the influence of thermal effects. Either soliton annihilation or survival can occur in different trials with the same tuning method, and a spontaneous route to soliton formation is observed.
We investigate soliton generation dynamics with the influence of thermal effects. Either soliton annihilation or survival can occur in different trials with the same tuning method, and a spontaneous route to soliton formation is observed.
△ Less
Submitted 22 December, 2016;
originally announced December 2016.
-
Soliton repetition rate in a silicon-nitride microresonator
Authors:
Chengying Bao,
Yi Xuan,
Cong Wang,
Jose A. Jaramillo-Villegas,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
The repetition rate of a Kerr comb comprising a single soliton in an anomalous dispersion silicon nitride microcavity is measured as a function of pump frequency tuning. The contributions from the Raman soliton self-frequency shift (SSFS) and from thermal effects are evaluated both experimentally and theoretically; the SSFS is found to dominate the changes in repetition rate. The relationship betw…
▽ More
The repetition rate of a Kerr comb comprising a single soliton in an anomalous dispersion silicon nitride microcavity is measured as a function of pump frequency tuning. The contributions from the Raman soliton self-frequency shift (SSFS) and from thermal effects are evaluated both experimentally and theoretically; the SSFS is found to dominate the changes in repetition rate. The relationship between the changes in repetition rate and pump frequency detuning is found to be independent of the nonlinearity coefficient and dispersion of the cavity. Modeling of the repetition rate change by using the generalized Lugiato-Lefever equation is discussed; the Kerr shock is found to have only a minor effect on repetition rate for cavity solitons with duration down to ~50 fs.
△ Less
Submitted 15 November, 2016;
originally announced November 2016.
-
Persistent energy-time entanglement covering multiple resonances of an on-chip biphoton frequency comb
Authors:
Jose A. Jaramillo-Villegas,
Poolad Imany,
Ogaga D. Odele,
Daniel E. Leaird,
Zhe-Yu Ou,
Minghao Qi,
Andrew M. Weiner
Abstract:
We investigate the time-frequency signatures of an on-chip biphoton frequency comb (BFC) generated from a silicon nitride microring resonator. Using a Franson interferometer, we examine the multifrequency nature of the photon pair source in a time entanglement measurement scheme; having multiple frequency modes from the BFC results in a modulation of the interference pattern. This measurement toge…
▽ More
We investigate the time-frequency signatures of an on-chip biphoton frequency comb (BFC) generated from a silicon nitride microring resonator. Using a Franson interferometer, we examine the multifrequency nature of the photon pair source in a time entanglement measurement scheme; having multiple frequency modes from the BFC results in a modulation of the interference pattern. This measurement together with a Schmidt mode decomposition shows that the generated continuous variable energy-time entangled state spans multiple pair-wise modes. Additionally, we demonstrate nonlocal dispersion cancellation, a foundational concept in time-energy entanglement, suggesting the potential of the chip-scale BFC for large-alphabet quantum key distribution.
△ Less
Submitted 9 June, 2017; v1 submitted 11 November, 2016;
originally announced November 2016.
-
Second-harmonic assisted four-wave mixing in chip-based microresonator frequency comb generation
Authors:
Xiaoxiao Xue,
François Leo,
Yi Xuan,
Jose A. Jaramillo-Villegas,
Pei-Hsun Wang,
Daniel E. Leaird,
Miro Erkintalo,
Minghao Qi,
Andrew M. Weiner
Abstract:
Simultaneous Kerr comb formation and second-harmonic generation with on-chip microresonators can greatly facilitate comb self-referencing for optical clocks and frequency metrology. Moreover, the presence of both second- and third-order nonlinearities results in complex cavity dynamics that is of high scientific interest but is still far from well understood. Here, we demonstrate that the interact…
▽ More
Simultaneous Kerr comb formation and second-harmonic generation with on-chip microresonators can greatly facilitate comb self-referencing for optical clocks and frequency metrology. Moreover, the presence of both second- and third-order nonlinearities results in complex cavity dynamics that is of high scientific interest but is still far from well understood. Here, we demonstrate that the interaction between the fundamental and the second-harmonic waves can provide an entirely new way of phase-matching for four-wave mixing in optical microresonators, enabling the generation of optical frequency combs in the normal dispersion regime, under conditions where comb creation is ordinarily prohibited. We derive new coupled time-domain mean-field equations and obtain simulation results showing good qualitative agreement with our experimental observations. Our findings provide a novel way of overcoming the dispersion limit for simultaneous Kerr comb formation and second-harmonic generation, which might prove especially important in the near-visible to visible range where several atomic transitions commonly used for stabilization of optical clocks are located and where the large normal material dispersion is likely to dominate.
△ Less
Submitted 19 November, 2016; v1 submitted 10 July, 2016;
originally announced July 2016.
-
Frequency Comb Generation in 300 nm Thick SiN Concentric-Racetrack-Resonators: Overcoming the Material Dispersion Limit
Authors:
Sangsik Kim,
Kyunghun Han,
Cong Wang,
Jose A. Jaramillo-Villegas,
Xiaoxiao Xue,
Chengying Bao,
Yi Xuan,
Daniel E. Leaird,
Andrew M. Weiner,
Minghao Qi
Abstract:
Kerr nonlinearity based frequency combs and solitons have been generated from on-chip optical microresonators with high quality factors and global or local anomalous dispersion. However, fabrication of such resonators usually requires materials and/or processes that are not standard in semiconductor manufacturing facilities. Moreover, in certain frequency regimes such as visible and ultra-violet,…
▽ More
Kerr nonlinearity based frequency combs and solitons have been generated from on-chip optical microresonators with high quality factors and global or local anomalous dispersion. However, fabrication of such resonators usually requires materials and/or processes that are not standard in semiconductor manufacturing facilities. Moreover, in certain frequency regimes such as visible and ultra-violet, the large normal material dispersion makes it extremely difficult to achieve anomalous dispersion. Here we present a concentric racetrack-shaped resonator that achieves anomalous dispersion in a 300 nm thick silicon nitride film, suitable for semiconductor manufacturing but previously thought to result only in waveguides with high normal dispersion, a high intrinsic Q of 1.5 million, and a novel mode-selective coupling scheme that allows coherent combs to be generated. We also provide evidence suggestive of soliton-like pulse formation in the generated comb. Our method can achieve anomalous dispersion over moderately broad bandwidth for resonators at almost any wavelength while still maintaining material and process compatibility with high-volume semiconductor manufacturing.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Observation of Fermi-Pasta-Ulam Recurrence Induced by Breather Solitons in an Optical Microresonator
Authors:
Chengying Bao,
Jose A. Jaramillo-Villegas,
Yi Xuan,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
We present, experimentally and numerically, the observation of Fermi-Pasta-Ulam recurrence induced by breather solitons in a high-Q SiN microresonator. Breather solitons can be excited by increasing the pump power at a relatively small pump phase detuning in microresonators. Out of phase power evolution is observed for groups of comb lines around the center of the spectrum compared to groups of li…
▽ More
We present, experimentally and numerically, the observation of Fermi-Pasta-Ulam recurrence induced by breather solitons in a high-Q SiN microresonator. Breather solitons can be excited by increasing the pump power at a relatively small pump phase detuning in microresonators. Out of phase power evolution is observed for groups of comb lines around the center of the spectrum compared to groups of lines in the spectral wings. The evolution of the power spectrum is not symmetric with respect to the spectrum center. Numerical simulations based on the generalized Lugiato-Lefever equation are in good agreement with the experimental results and unveil the role of stimulated Raman scattering in the symmetry breaking of the power spectrum evolution. Our results shows that optical microresonators can be exploited as a powerful platform for the exploration of soliton dynamics.
△ Less
Submitted 17 October, 2016; v1 submitted 21 June, 2016;
originally announced June 2016.
-
Intracavity characterization of micro-comb generation in the single-soliton regime
Authors:
Pei-Hsun Wang,
Jose A. Jaramillo-Villegas,
Yi Xuan,
Xiaoxiao Xue,
Chengying Bao,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
Soliton formation in on-chip micro-comb generation balances cavity dispersion and nonlinearity and allows coherent, low-noise comb operation. We study the intracavity waveform of an on-chip microcavity soliton in a silicon nitride microresonator configured with a drop port. Whereas combs measured at the through port are accompanied by a very strong pump line which accounts for >99% of the output p…
▽ More
Soliton formation in on-chip micro-comb generation balances cavity dispersion and nonlinearity and allows coherent, low-noise comb operation. We study the intracavity waveform of an on-chip microcavity soliton in a silicon nitride microresonator configured with a drop port. Whereas combs measured at the through port are accompanied by a very strong pump line which accounts for >99% of the output power, our experiments reveal that inside the microcavity, most of the power is in the soliton. Time-domain measurements performed at the drop port provide information that directly reflects the intracavity field. Data confirm a train of bright, close to bandwidth-limited pulses, accompanied by a weak continuous wave (CW) background with a small phase shift relative to the comb.
△ Less
Submitted 10 March, 2016;
originally announced March 2016.
-
Normal-dispersion Microcombs Enabled by Controllable Mode Interactions
Authors:
Xiaoxiao Xue,
Yi Xuan,
Pei-Hsun Wang,
Yang Liu,
Dan E. Leaird,
Minghhao Qi,
Andrew M. Weiner
Abstract:
We demonstrate a scheme incorporating dual coupled microresonators through which mode interactions are intentionally introduced and controlled for Kerr frequency comb (microcomb) generation in the normal dispersion region. Microcomb generation, repetition rate selection, and mode locking are achieved with coupled silicon nitride microrings controlled via an on-chip microheater. Our results show fo…
▽ More
We demonstrate a scheme incorporating dual coupled microresonators through which mode interactions are intentionally introduced and controlled for Kerr frequency comb (microcomb) generation in the normal dispersion region. Microcomb generation, repetition rate selection, and mode locking are achieved with coupled silicon nitride microrings controlled via an on-chip microheater. Our results show for the first time that mode interactions can be programmably tuned to facilitate broadband normal-dispersion microcombs. The proposed scheme increases freedom in microresonator design and may make it possible to generate microcombs in an extended wavelength range (e.g., in the visible) where normal material dispersion is likely to dominate.
△ Less
Submitted 20 March, 2015;
originally announced March 2015.
-
Deterministic single soliton generation and compression in microring resonators avoiding the chaotic region
Authors:
Jose A. Jaramillo-Villegas,
Xiaoxiao Xue,
Pei-Hsun Wang,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
A path within the parameter space of detuning and pump power is demonstrated in order to obtain a single cavity soliton (CS) with certainty in SiN microring resonators in the anomalous dispersion regime. Once the single CS state is reached, it is possible to continue a path to compress it, broadening the corresponding single free spectral range (FSR) Kerr frequency comb. The first step to achieve…
▽ More
A path within the parameter space of detuning and pump power is demonstrated in order to obtain a single cavity soliton (CS) with certainty in SiN microring resonators in the anomalous dispersion regime. Once the single CS state is reached, it is possible to continue a path to compress it, broadening the corresponding single free spectral range (FSR) Kerr frequency comb. The first step to achieve this goal is to identify the stable regions in the parameter space via numerical simulations of the Lugiato-Lefever equation (LLE). Later, using this identification, we define a path from the stable modulation instability (SMI) region to the stable cavity solitons (SCS) region avoiding the chaotic and unstable regions.
△ Less
Submitted 19 May, 2015; v1 submitted 13 January, 2015;
originally announced January 2015.
-
Retrieving the Complex Intracavity Pump Field of a Kerr Comb from the Through Port Data
Authors:
Xiaoxiao Xue,
Yi Xuan,
Yang Liu,
Pei-Hsun Wang,
Steven Chen,
Jian Wang,
Dan E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
A method of retrieving the complex intracavity pump field from the through port is proposed, and verified through characterizing the time-domain waveform of a mode-locked comb related to dark soliton formation in a normal-dispersion microresonator.
A method of retrieving the complex intracavity pump field from the through port is proposed, and verified through characterizing the time-domain waveform of a mode-locked comb related to dark soliton formation in a normal-dispersion microresonator.
△ Less
Submitted 4 June, 2014;
originally announced June 2014.
-
Investigation of Mode Coupling in Normal Dispersion Silicon Nitride Microresonators for Kerr Frequency Comb Generation
Authors:
Yang Liu,
Yi Xuan,
Xiaoxiao Xue,
Pei-Hsun Wang,
Steven Chen,
Andrew J. Metcalf,
Jian Wang,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
Kerr frequency combs generated from microresonators are the subject of intense study. Most research employs microresonators with anomalous dispersion, for which modulation instability is believed to play a key role in initiation of the comb. Comb generation in normal dispersion microresonators has also been reported but is less well understood. Here we report a detailed investigation of few-moded,…
▽ More
Kerr frequency combs generated from microresonators are the subject of intense study. Most research employs microresonators with anomalous dispersion, for which modulation instability is believed to play a key role in initiation of the comb. Comb generation in normal dispersion microresonators has also been reported but is less well understood. Here we report a detailed investigation of few-moded, normal dispersion silicon nitride microresonators, showing that mode coupling can strongly modify the local dispersion, even changing its sign. We demonstrate a link between mode coupling and initiation of comb generation by showing experimentally, for the first time to our knowledge, pinning of one of the initial comb sidebands near a mode crossing frequency. Associated with this route to comb formation, we observe direct generation of coherent, bandwidth-limited pulses at repetition rates down to 75 GHz, without the need to first pass through a chaotic state.
△ Less
Submitted 23 May, 2014;
originally announced May 2014.
-
Rapidly reconfigurable radio-frequency arbitrary waveforms synthesized on a CMOS photonic chip
Authors:
Jian Wang,
Hao Shen,
Li Fan,
Rui Wu,
Ben Niu,
Leo T. Varghese,
Yi Xuan,
Daniel E. Leaird,
Xi Wang,
Fuwan Gan,
Andrew M. Weiner,
Minghao Qi
Abstract:
Photonic methods of radio-frequency waveform generation and processing provide performance and flexibility over electronic methods due to the ultrawide bandwidth offered by the optical carriers. However, they suffer from lack of integration and slow reconfiguration speed. Here we propose an architecture of integrated photonic RF waveform generation and processing, and implement it on a silicon chi…
▽ More
Photonic methods of radio-frequency waveform generation and processing provide performance and flexibility over electronic methods due to the ultrawide bandwidth offered by the optical carriers. However, they suffer from lack of integration and slow reconfiguration speed. Here we propose an architecture of integrated photonic RF waveform generation and processing, and implement it on a silicon chip fabricated in a semiconductor manufacturing foundry. Our device can generate programmable RF bursts or continuous waveforms with only the light source, electrical drives/controls and detectors being off chip. It turns on and off an individual pulse in the RF burst within 4 nanoseconds, achieving a reconfiguration speed three orders of magnitude faster than thermal tuning. The on-chip optical delay elements offers an integrated approach to accurately manipulate individual RF waveform features without constrains set by the speed and timing jitter of electronics, and should find broad applications ranging from high-speed wireless to defense electronics.
△ Less
Submitted 11 April, 2014;
originally announced April 2014.
-
Mode interaction aided excitation of dark solitons in microresonators constructed of normal dispersion waveguides
Authors:
Xiaoxiao Xue,
Yi Xuan,
Yang Liu,
Pei-Hsun Wang,
Steven Chen,
Jian Wang,
Dan E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
Kerr frequency combs from microresonators are now extensively investigated as a potentially portable technology for a variety of applications. Most studies employ anomalous dispersion microresonators that support modulational instability for comb initiation, and mode-locking transitions resulting in coherent bright soliton-like pulse generation have been reported. However, some experiments show co…
▽ More
Kerr frequency combs from microresonators are now extensively investigated as a potentially portable technology for a variety of applications. Most studies employ anomalous dispersion microresonators that support modulational instability for comb initiation, and mode-locking transitions resulting in coherent bright soliton-like pulse generation have been reported. However, some experiments show comb generation in normal dispersion microresonators; simulations suggest the formation of dark pulse temporal profiles. Excitation of dark pulse solutions is difficult due to the lack of modulational instability in the effective blue-detuned pum** region; an excitation pathway has been demonstrated neither in experiment nor in simulation. Here we report experiments in which dark pulse combs are formed by mode-interaction-aided excitation; for the first time, a mode-locking transition is observed in the normal dispersion regime. The excitation pathway proposed is also supported by simulations.
△ Less
Submitted 16 August, 2015; v1 submitted 10 April, 2014;
originally announced April 2014.
-
Tunable Frequency Comb Generation from a Microring with a Thermal Heater
Authors:
Xiaoxiao Xue,
Yi Xuan,
Pei-Hsun Wang,
Jian Wang,
Dan E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
We demonstrate a novel comb tuning method for microresonator-based Kerr comb generators. Continuously tunable, low-noise, and coherent comb generation is achieved in a CMOS-compatible silicon nitride microring resonator.
We demonstrate a novel comb tuning method for microresonator-based Kerr comb generators. Continuously tunable, low-noise, and coherent comb generation is achieved in a CMOS-compatible silicon nitride microring resonator.
△ Less
Submitted 21 February, 2014;
originally announced February 2014.
-
Coherent Frequency Comb Generation in a Silicon Nitride Microresonator with Anomalous Dispersion
Authors:
Pei-Hsun Wang,
Yi Xuan,
Jian Wang,
Xiaoxiao Xue,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
We observe a transition to a coherent-comb state in a SiN-microresonator with anomalous dispersion. Although ~300 fs pulse trains are generated after line-by-line sha**, the intensity within the microring does not appear to be pulse-like.
We observe a transition to a coherent-comb state in a SiN-microresonator with anomalous dispersion. Although ~300 fs pulse trains are generated after line-by-line sha**, the intensity within the microring does not appear to be pulse-like.
△ Less
Submitted 21 February, 2014;
originally announced February 2014.
-
Drop-port study of microresonator frequency combs: power transfer and time-domain characterization
Authors:
Pei-Hsun Wang,
Yi Xuan,
Li Fan,
Leo Tom Varghese,
Jian Wang,
Yang Liu,
Daniel E. Leaird,
Minghao Qi,
Andrew M. Weiner
Abstract:
We use a drop-port geometry to study power transfer in silicon nitride on-chip microresonator frequency comb generators. In sharp contrast with the traditional transmission geometry, we observe smooth output spectra with comparable powers in the pump and adjacent comb lines. An observation of saturation in the drop-port output power is explained semi-empirically by introducing pump saturation into…
▽ More
We use a drop-port geometry to study power transfer in silicon nitride on-chip microresonator frequency comb generators. In sharp contrast with the traditional transmission geometry, we observe smooth output spectra with comparable powers in the pump and adjacent comb lines. An observation of saturation in the drop-port output power is explained semi-empirically by introducing pump saturation into a coupling of modes model. Autocorrelation measurements are performed on the drop-port output, without the need to filter out or suppress the strong pump line as is necessary in thru-port experiments. Passively mode-locked pulses are observed with a normal dispersion microcavity.
△ Less
Submitted 6 August, 2013; v1 submitted 31 May, 2013;
originally announced May 2013.
-
Observation of Correlation between Route to Formation, Coherence, Noise, and Communication Performance of Kerr Combs
Authors:
Pei-Hsun Wang,
Fahmida Ferdous,
Houxun Miao,
Jian Wang,
Daniel E. Leaird,
Kartik Srinivasan,
Lei Chen,
Vladimir Aksyuk,
Andrew M. Weiner
Abstract:
Microresonator optical frequency combs based on cascaded four-wave mixing are potentially attractive as a multi-wavelength source for on-chip optical communications. In this paper we compare time domain coherence, radio-frequency (RF) intensity noise, and individual line optical communications performance for combs generated from two different silicon nitride microresonators. The comb generated by…
▽ More
Microresonator optical frequency combs based on cascaded four-wave mixing are potentially attractive as a multi-wavelength source for on-chip optical communications. In this paper we compare time domain coherence, radio-frequency (RF) intensity noise, and individual line optical communications performance for combs generated from two different silicon nitride microresonators. The comb generated by one microresonator forms directly with lines spaced by a single free spectral range (FSR) and exhibits high coherence, low noise, and excellent 10 Gbit/s optical communications results. The comb generated by the second microresonator forms initially with multiple FSR line spacing, with additional lines later filling to reach single FSR spacing. This comb exhibits degraded coherence, increased intensity noise, and severely degraded communications performance. This study is to our knowledge the first to simultaneously investigate and observe a correlation between the route to comb formation, the coherence, noise, and optical communications performance of a Kerr comb.
△ Less
Submitted 27 October, 2012;
originally announced October 2012.
-
Probing Within Partially Coherent Microcavity Frequency Combs via Optical Pulse Sha**
Authors:
Fahmida Ferdous,
Houxun Miao,
Pei-Hsun Wang,
Daniel E. Leaird,
Kartik Srinivasan,
Lei Chen,
Vladimir Aksyuk,
Andrew M. Weiner
Abstract:
Recent investigations of microcavity frequency combs based on cascaded four-wave mixing have revealed a link between the evolution of the optical spectrum and the observed temporal coherence. Here we study a silicon nitride microresonator for which the initial four-wave mixing sidebands are spaced by multiple free spectral ranges (FSRs) from the pump, then fill in to yield a comb with single FSR s…
▽ More
Recent investigations of microcavity frequency combs based on cascaded four-wave mixing have revealed a link between the evolution of the optical spectrum and the observed temporal coherence. Here we study a silicon nitride microresonator for which the initial four-wave mixing sidebands are spaced by multiple free spectral ranges (FSRs) from the pump, then fill in to yield a comb with single FSR spacing, resulting in partial coherence. By using a pulse shaper to select and manipulate the phase of various subsets of spectral lines, we are able to probe the structure of the coherence within the partially coherent comb. Our data demonstrate strong variation in the degree of mutual coherence between different groups of lines and provide support for a simple model of partially coherent comb formation.
△ Less
Submitted 9 July, 2012;
originally announced July 2012.
-
Comb-Based Radio-Frequency Photonic Filters with Rapid Tunability and High Selectivity
Authors:
V. R. Supradeepa,
Christopher M. Long,
Rui Wu,
Fahmida Ferdous,
Ehsan Hamidi,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
Photonic technologies have received considerable attention for enhancement of radio-frequency (RF) electrical systems, including high-frequency analog signal transmission, control of phased arrays, analog-to-digital conversion, and signal processing. Although the potential of radio-frequency photonics for implementation of tunable electrical filters over broad RF bandwidths has been much discussed…
▽ More
Photonic technologies have received considerable attention for enhancement of radio-frequency (RF) electrical systems, including high-frequency analog signal transmission, control of phased arrays, analog-to-digital conversion, and signal processing. Although the potential of radio-frequency photonics for implementation of tunable electrical filters over broad RF bandwidths has been much discussed, realization of programmable filters with highly selective filter lineshapes and rapid reconfigurability has faced significant challenges. A new approach for RF photonic filters based on frequency combs offers a potential route to simultaneous high stopband attenuation, fast tunability, and bandwidth reconfiguration. In one configuration tuning of the RF passband frequency is demonstrated with unprecedented (~40 ns) speed by controlling the optical delay between combs. In a second, fixed filter configuration, cascaded four-wave mixing simultaneously broadens and smoothes comb spectra, resulting in Gaussian RF filter lineshapes exhibiting extremely high (>60 dB) main lobe to sidelobe suppression ratio and (>70 dB) stopband attenuation.
△ Less
Submitted 25 June, 2012; v1 submitted 3 May, 2011;
originally announced May 2011.
-
Gaussian-shaped Optical Frequency Comb Generation for Microwave Photonic Filtering
Authors:
Rui Wu,
Christopher M. Long,
Ehsan Hamidi,
V. R. Supradeepa,
Min Hyup Song,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
Using only electro-optic modulators, we generate a 41-line 10-GHz Gaussian-shaped optical frequency comb. We use this comb to demonstrate apodized microwave photonic filters with greater than 43-dB sidelobe suppression without the need for a pulse shaper.
Using only electro-optic modulators, we generate a 41-line 10-GHz Gaussian-shaped optical frequency comb. We use this comb to demonstrate apodized microwave photonic filters with greater than 43-dB sidelobe suppression without the need for a pulse shaper.
△ Less
Submitted 21 April, 2011; v1 submitted 20 April, 2011;
originally announced April 2011.
-
Spectral Line-by-Line Pulse Sha** of an On-Chip Microresonator Frequency Comb
Authors:
Fahmida Ferdous,
Houxun Miao,
Daniel E. Leaird,
Kartik Srinivasan,
Jian Wang,
Lei Chen,
Leo Tom Varghese,
A. M. Weiner
Abstract:
We report, for the first time to the best of our knowledge, spectral phase characterization and line-by-line pulse sha** of an optical frequency comb generated by nonlinear wave mixing in a microring resonator. Through programmable pulse sha** the comb is compressed into a train of near-transform-limited pulses of \approx 300 fs duration (intensity full width half maximum) at 595 GHz repetitio…
▽ More
We report, for the first time to the best of our knowledge, spectral phase characterization and line-by-line pulse sha** of an optical frequency comb generated by nonlinear wave mixing in a microring resonator. Through programmable pulse sha** the comb is compressed into a train of near-transform-limited pulses of \approx 300 fs duration (intensity full width half maximum) at 595 GHz repetition rate. An additional, simple example of optical arbitrary waveform generation is presented. The ability to characterize and then stably compress the frequency comb provides new data on the stability of the spectral phase and suggests that random relative frequency shifts due to uncorrelated variations of frequency dependent phase are at or below the 100 microHertz level.
△ Less
Submitted 11 March, 2011;
originally announced March 2011.
-
Generation of very flat optical frequency combs from continuous-wave lasers using cascaded intensity and phase modulators driven by tailored radio frequency waveforms
Authors:
Rui Wu,
V. R. Supradeepa,
Christopher M. Long,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We demonstrate a scheme, based on a cascade of lithium niobate intensity and phase modulators driven by specially tailored radio frequency waveforms to generate an optical frequency comb with very high spectral flatness. In this work we demonstrate a 10 GHz comb with ~40 lines with spectral power variation below 1-dB and ~60 lines in total. The number of lines that can be generated is limited by t…
▽ More
We demonstrate a scheme, based on a cascade of lithium niobate intensity and phase modulators driven by specially tailored radio frequency waveforms to generate an optical frequency comb with very high spectral flatness. In this work we demonstrate a 10 GHz comb with ~40 lines with spectral power variation below 1-dB and ~60 lines in total. The number of lines that can be generated is limited by the power handling capability of the phase modulator, and this can be scaled without compromising the spectral flatness. Furthermore, the spectral phase of the generated combs in our scheme is almost purely quadratic which, as we will demonstrate, allows for very high quality pulse compression using only single mode fiber.
△ Less
Submitted 23 September, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.
-
New Aspects of Temporal Dispersion in High Resolution Fourier Pulse Sha**: A Quantitative Description with Virtually Imaged Phased Array Pulse Shapers
Authors:
V. R. Supradeepa,
Ehsan Hamidi,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We report new aspects of temporal dispersion in Fourier pulse shapers which contain spectral dispersers with a nonlinear frequency to space map**. These effects are particularly important in high resolution operation since high resolution dispersers typically exhibit pronounced nonlinear angular dispersion over relatively small bandwidths. In this paper we present a general discussion of the new…
▽ More
We report new aspects of temporal dispersion in Fourier pulse shapers which contain spectral dispersers with a nonlinear frequency to space map**. These effects are particularly important in high resolution operation since high resolution dispersers typically exhibit pronounced nonlinear angular dispersion over relatively small bandwidths. In this paper we present a general discussion of the new effects followed by quantitative analysis and experimental verification for pulse shapers which utilize a virtually imaged phased array (VIPA) as the spectral disperser. Compared to the well known 4f configuration, our results demonstrate a substantial modification to the placement of the optical components required to obtain zero temporal dispersion. Furthermore, spectral phase variations associated with nonzero dispersion coupled with contributions from multiple diffraction orders are shown to give rise to a dramatic new spectral interference effect, which can be used to monitor temporal dispersion purely in the spectral domain. We expect the effects we present in this paper to become prominent even for more conventional diffraction grating based pulse shapers for bandwidths sufficiently large that nonlinear spectral map** becomes strong.
△ Less
Submitted 23 September, 2010; v1 submitted 26 April, 2010;
originally announced April 2010.
-
Self-referenced characterization of optical frequency combs and arbitrary waveforms using a simple, linear, zero-delay implementation of spectral shearing interferometry
Authors:
V. R. Supradeepa,
Christopher M. Long,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We discuss a simple, linear, zero-delay implementation of spectral shearing interferometry for amplitude and phase characterization of optical frequency comb sources and arbitrary waveforms. We demonstrate this technique by characterizing two different high repetition rate (~10 GHz) frequency comb sources, generated respectively by strong external and intracavity phase modulation of a continuous-w…
▽ More
We discuss a simple, linear, zero-delay implementation of spectral shearing interferometry for amplitude and phase characterization of optical frequency comb sources and arbitrary waveforms. We demonstrate this technique by characterizing two different high repetition rate (~10 GHz) frequency comb sources, generated respectively by strong external and intracavity phase modulation of a continuous-wave laser. This technique is easy to implement, requiring only an intensity modulator and an optical spectrum analyzer (OSA), and is demonstrated to work at average power levels down to 100nW (10aJ/pulse at 10 GHz). By exploiting the long coherence lengths of these frequency combs and the self-referenced nature of the measurement, we also demonstrate a simple single-ended measurement of dispersion and dispersion slope in long lengths of fiber (>25km).
△ Less
Submitted 23 September, 2010; v1 submitted 31 October, 2009;
originally announced November 2009.
-
Fast Characterization of Dispersion and Dispersion Slope of Optical Fiber Links using Spectral Interferometry with Frequency Combs
Authors:
V. R. Supradeepa,
Christopher M. Long,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
We demonstrate fast characterization (~1.4 microseconds) of both the dispersion and dispersion slope of long optical fiber links (~25 km) using dual quadrature spectral interferometry with an optical frequency comb. Compared to previous spectral interferometry experiments limited to fiber lengths of meters, the long coherence length and the periodic delay properties of frequency combs, coupled w…
▽ More
We demonstrate fast characterization (~1.4 microseconds) of both the dispersion and dispersion slope of long optical fiber links (~25 km) using dual quadrature spectral interferometry with an optical frequency comb. Compared to previous spectral interferometry experiments limited to fiber lengths of meters, the long coherence length and the periodic delay properties of frequency combs, coupled with fast data acquisition, enable spectral interferometric characterization of fibers longer by several orders of magnitude. We expect that our method will be useful to recently proposed lightwave techniques like coherent WDM and to coherent modulation formats by providing a real time monitoring capability for the link dispersion. Another area of application would be in stabilization of systems which perform frequency and timing distribution over long fiber links using stabilized optical frequency combs.
△ Less
Submitted 1 February, 2010; v1 submitted 23 July, 2009;
originally announced July 2009.
-
Single Shot Amplitude and Phase Characterization of Optical Arbitrary Waveforms
Authors:
V. R. Supradeepa,
Daniel E. Leaird,
Andrew M. Weiner
Abstract:
Using a time-gated dual quadrature spectral interferometry technique, for the first time we demonstrate single-shot characterization of both spectral amplitude and phase of ~1THz bandwidth optical arbitrary waveforms generated from a 10 GHz frequency comb. Our measurements provide a temporal resolution of 1ps over a record length of 100ps. Singleshot characterization becomes particularly relevan…
▽ More
Using a time-gated dual quadrature spectral interferometry technique, for the first time we demonstrate single-shot characterization of both spectral amplitude and phase of ~1THz bandwidth optical arbitrary waveforms generated from a 10 GHz frequency comb. Our measurements provide a temporal resolution of 1ps over a record length of 100ps. Singleshot characterization becomes particularly relevant when waveform synthesis operations are updated at the repetition rate of the comb allowing creation of potentially infinite record length waveforms. We first demonstrate unambiguous single shot retrieval using rapidly updating waveforms. We then perform additional single-shot measurements of static user-defined waveforms generated via line-by-line pulse sha**.
△ Less
Submitted 31 July, 2009; v1 submitted 14 July, 2009;
originally announced July 2009.
