-
On the two-dimensional Brillouin flow
Authors:
Ryan A. Revolinsky,
Christopher J. Swenson,
Nicholas M. Jordan,
Y. Y. Lau,
Ronald M. Gilgenbach
Abstract:
The Brillouin flow is a rectilinear, sheared electron fluid flow in a crossed electric field (E) and magnetic field (B), in the E x B direction with zero flow velocity and zero electric field at the surface with which the flow is in contact. It is broadly considered as the equilibrium electron flow in high power crossed-field devices including the magnetron and magnetically insulated transmission…
▽ More
The Brillouin flow is a rectilinear, sheared electron fluid flow in a crossed electric field (E) and magnetic field (B), in the E x B direction with zero flow velocity and zero electric field at the surface with which the flow is in contact. It is broadly considered as the equilibrium electron flow in high power crossed-field devices including the magnetron and magnetically insulated transmission line oscillators. This paper provides an examination of Brillouin flow in two dimensions, in a cylindrical geometry where the anode radius changes abruptly at a single axial location while the cathode surface has a constant radius. Our simulation confirms the proof that there is no equilibrium Brillouin flow solution for such a geometry. It further reveals that this change in the anode radius introduces novel bunching of the electrons within the Brillouin hub. This bunching occurs at low frequencies and is very pronounced if the Brillouin flow is from the small gap region to the large gap region, but is minimal if the Brillouin flow is from the large gap region to the small gap region. New insights are provided into the physical processes that initiate and sustain the bunching processes that are unique for a crossed-field diode, as compared with a non-magnetized diode. We argue that this enhanced bunching, and its concomitant formation of strong vortices, is not restricted to an abrupt change in the anode-cathode gap spacing.
△ Less
Submitted 19 April, 2024; v1 submitted 16 April, 2024;
originally announced April 2024.
-
A Review of Graph Neural Networks in Epidemic Modeling
Authors:
Zewen Liu,
Guancheng Wan,
B. Aditya Prakash,
Max S. Y. Lau,
Wei **
Abstract:
Since the onset of the COVID-19 pandemic, there has been a growing interest in studying epidemiological models. Traditional mechanistic models mathematically describe the transmission mechanisms of infectious diseases. However, they often suffer from limitations of oversimplified or fixed assumptions, which could cause sub-optimal predictive power and inefficiency in capturing complex relation inf…
▽ More
Since the onset of the COVID-19 pandemic, there has been a growing interest in studying epidemiological models. Traditional mechanistic models mathematically describe the transmission mechanisms of infectious diseases. However, they often suffer from limitations of oversimplified or fixed assumptions, which could cause sub-optimal predictive power and inefficiency in capturing complex relation information. Consequently, Graph Neural Networks (GNNs) have emerged as a progressively popular tool in epidemic research. In this paper, we endeavor to furnish a comprehensive review of GNNs in epidemic tasks and highlight potential future directions. To accomplish this objective, we introduce hierarchical taxonomies for both epidemic tasks and methodologies, offering a trajectory of development within this domain. For epidemic tasks, we establish a taxonomy akin to those typically employed within the epidemic domain. For methodology, we categorize existing work into Neural Models and Hybrid Models. Following this, we perform an exhaustive and systematic examination of the methodologies, encompassing both the tasks and their technical details. Furthermore, we discuss the limitations of existing methods from diverse perspectives and systematically propose future research directions. This survey aims to bridge literature gaps and promote the progression of this promising field, with a list of relevant papers at https://github.com/Emory-Melody/awesome-epidemic-modelingpapers. We hope that it will facilitate synergies between the communities of GNNs and epidemiology, and contribute to their collective progress.
△ Less
Submitted 21 April, 2024; v1 submitted 28 March, 2024;
originally announced March 2024.
-
Picotesla-sensitivity microcavity optomechanical magnetometry
Authors:
Zhi-Gang Hu,
Yi-Meng Gao,
Jian-Fei Liu,
Hao Yang,
Min Wang,
Yuechen Lei,
Xin Zhou,
**cheng Li,
Xuening Cao,
****g Liang,
Chao-Qun Hu,
Zhilin Li,
Yong-Chang Lau,
Jian-Wang Cai,
Bei-Bei Li
Abstract:
Cavity optomechanical systems have enabled precision sensing of magnetic fields, by leveraging the optical resonance-enhanced readout and mechanical resonance-enhanced response. Previous studies have successfully achieved scalable and reproducible microcavity optomechanical magnetometry (MCOM) by incorporating Terfenol-D thin films into high-quality ($Q$) factor whispering gallery mode (WGM) micro…
▽ More
Cavity optomechanical systems have enabled precision sensing of magnetic fields, by leveraging the optical resonance-enhanced readout and mechanical resonance-enhanced response. Previous studies have successfully achieved scalable and reproducible microcavity optomechanical magnetometry (MCOM) by incorporating Terfenol-D thin films into high-quality ($Q$) factor whispering gallery mode (WGM) microcavities. However, the sensitivity was limited to 585 pT/Hz$^{1/2}$, over 20 times inferior to those using Terfenol-D particles. In this work, we propose and demonstrate a high-sensitivity and scalable MCOM approach by sputtering a FeGaB thin film onto a high-$Q$ SiO$_2$ WGM microdisk. Theoretical studies are conducted to explore the magnetic actuation constant and noise-limited sensitivity by varying the parameters of the FeGaB film and SiO$_2$ microdisk. Multiple magnetometers with different radii are fabricated and characterized. By utilizing a microdisk with a radius of 355 $μ$m and a thickness of 1 $μ$m, along with a FeGaB film with a radius of 330 $μ$m and a thickness of 1.3 $μ$m, we have achieved a remarkable peak sensitivity of 1.68 pT/Hz$^{1/2}$ at 9.52 MHz. This represents a significant improvement of over two orders of magnitude compared with previous studies employing sputtered Terfenol-D film. Notably, the magnetometer operates without a bias magnetic field, thanks to the remarkable soft magnetic properties of the FeGaB film. Furthermore, as a proof-of-concept, we have demonstrated the real-time measurement of a pulsed magnetic field simulating the corona current in a high-voltage transmission line using our developed magnetometer. These high-sensitivity magnetometers hold great potential for various applications, such as magnetic induction tomography and corona current monitoring.
△ Less
Submitted 21 March, 2024;
originally announced March 2024.
-
Doppler Tracking Data of Martian Mission Tianwen-I and Upper Limit of Stochastic Gravitational Wave Background
Authors:
Xiaoming Bi,
Zhongkai Guo,
Xiaobo Zou,
Yong Huang,
Peijia Li,
Jianfeng Cao,
Lue Chen,
Wenlin Tang,
Yun Kau Lau
Abstract:
Two way ranging data for spacecraft tracking of China's first Martian mission Tianwen-I is analysed. Shortly before the spacecraft entered the Mars parking orbit, the two way coherent microwave link between the spacecraft and the Earth resembles a long arm gravitational wave interferometer, with both the spacecraft and the Earth regarded as in an approximate free falling state. By carefully select…
▽ More
Two way ranging data for spacecraft tracking of China's first Martian mission Tianwen-I is analysed. Shortly before the spacecraft entered the Mars parking orbit, the two way coherent microwave link between the spacecraft and the Earth resembles a long arm gravitational wave interferometer, with both the spacecraft and the Earth regarded as in an approximate free falling state. By carefully selecting and analysing data segments of the time series of the two way ranging data during this time span, a parametric statistical model is built for the data segments and an upper limit for the stochastic gravitational waves background (SGWB) is then estimated within the frequency window 0.1Hz to 0.1 mHz. The upper bound improves considerably on those obtained before. In particular, around the deci-Hz band, there is a three orders improvement on the bound obtained previously by the two way ranging data of the Chang e 3 mission. Scientific applications of the upper bound is then considered and a weak upper bound is worked out for axions which is a promising candidate for ultra light dark matter.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
Limiting Current on Periodic Electron Sheets in a Planar Diode
Authors:
David Chernin,
Dion Li,
Y. Y. Lau
Abstract:
We consider the steady state limiting current that can be carried by an infinite periodic array of thin electron sheets spaced by period p in a planar diode of gap voltage V and gap separation d. Our primary assumptions are (1) electron motion is restricted by an infinite magnetic field to the direction normal to the electrode surfaces, (2) all electrons are emitted from the cathode with initial k…
▽ More
We consider the steady state limiting current that can be carried by an infinite periodic array of thin electron sheets spaced by period p in a planar diode of gap voltage V and gap separation d. Our primary assumptions are (1) electron motion is restricted by an infinite magnetic field to the direction normal to the electrode surfaces, (2) all electrons are emitted from the cathode with initial kinetic energy Ein, and (3) electron motion is non-relativistic. The limiting current density, averaged over a period and normalized to the classical 1D Child-Langmuir (CL) current density (including a factor that accounts for non-zero Ein), is found to depend only on the two dimensionless parameters p/d and Ein/eV. This average limiting current density is computed from the maximum current density for which the iterative solution of a non-linear integral equation converges. Numerical results and empirical curve fits for the limiting current are presented, together with an analysis as p/d and Ein/eV approach zero or infinity, in which cases previously published results are recovered. Our main finding is that, while the local anode current density within each electron sheet is infinite in our model (that is, it exceeds the classical 1D CL value by an 'infinite' factor), the period average anode current density is in fact still bounded by the classical 1D CL value. This study therefore provides further evidence that the classical 1D Child-Langmuir current density is truly a fundamental limit that cannot be circumvented.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Boltzmann Equation Field Theory I: Ensemble Averages
Authors:
Jun Yan Lau
Abstract:
A quasi-nonlinear field theory which describes how to take ensemble averages that are unique to the Collisionless Boltzmann Equation is described. The assumption that the ensemble average of the distribution function is equal to the extremum entropy state, $\langle f \rangle = f_0$ is taken apart and shown to be wrong. An application describes the nonlinear saturation of Jeans' instability, and th…
▽ More
A quasi-nonlinear field theory which describes how to take ensemble averages that are unique to the Collisionless Boltzmann Equation is described. The assumption that the ensemble average of the distribution function is equal to the extremum entropy state, $\langle f \rangle = f_0$ is taken apart and shown to be wrong. An application describes the nonlinear saturation of Jeans' instability, and the gravitational amplification of Poisson noise.
△ Less
Submitted 6 October, 2023;
originally announced October 2023.
-
On the Child-Langmuir Law in One, Two, and Three Dimensions
Authors:
Y. Y. Lau,
Dion Li,
David P. Chernin
Abstract:
We consider the limiting current from an emitting patch whose size is much smaller than the anode-cathode spacing. The limiting current is formulated in terms of an integral equation. It is solved iteratively, first to numerically recover the classical one-dimensional Child-Langmuir law, including Jaffe's extension to a constant, nonzero electron emission velocity. We extend to 2-dimensions in whi…
▽ More
We consider the limiting current from an emitting patch whose size is much smaller than the anode-cathode spacing. The limiting current is formulated in terms of an integral equation. It is solved iteratively, first to numerically recover the classical one-dimensional Child-Langmuir law, including Jaffe's extension to a constant, nonzero electron emission velocity. We extend to 2-dimensions in which electron emission is restricted to an infinitely long stripe with infinitesimally narrow stripe width, so that the emitted electrons form an electron sheet. We next extend to 3-dimensions in which electron emission is restricted to a square tile (or a circular patch) with an infinitesimally small tile size (or patch radius), so that the emitted electrons form a needle-like line charge. Surprisingly, for the electron needle problem, we only find the null solution for the total line charge current, regardless of the assumed initial electron velocity. For the electron sheet problem, we also find only the null solution for the total sheet current if the electron emission velocity is assumed to be zero, and the total maximum sheet current becomes a finite, nonzero value if the electron emission velocity is assumed to be nonzero. These seemingly paradoxical results are shown to be consistent with the earlier works of the Child-Langmuir law of higher dimensions. They are also consistent with, or perhaps even anticipated by, the more recent theories and simulations on thermionic cathodes that used realistic work function distributions to account for patchy, nonuniform electron emission. The mathematical subtleties are discussed.
△ Less
Submitted 27 September, 2023; v1 submitted 26 July, 2023;
originally announced July 2023.
-
Induced Current Due to Electromagnetic Shock Produced by Charge Impact on a Conducting Surface
Authors:
D. Li,
P. Wong,
D. Chernin,
Y. Y. Lau
Abstract:
This paper compares the transient induced current due to the electromagnetic shock produced by a charged particle impacting a perfectly conducting plate, with the classical, quasi-static induced current of Ramo and Shockley (RS). We consider the simple model of a line charge, removed upon striking the plate. We find that the induced current due to the shock is negligible compared with the RS curre…
▽ More
This paper compares the transient induced current due to the electromagnetic shock produced by a charged particle impacting a perfectly conducting plate, with the classical, quasi-static induced current of Ramo and Shockley (RS). We consider the simple model of a line charge, removed upon striking the plate. We find that the induced current due to the shock is negligible compared with the RS current for nonrelativistic impact energies, but is more significant as the impact energy becomes mildly relativistic. The implications of these findings are discussed.
△ Less
Submitted 28 February, 2022;
originally announced March 2022.
-
Mono-elemental saturable absorber in mode-locked fiber laser: A review
Authors:
Kuen Yao Lau,
Jian-Cheng Zheng,
Cuihong **,
Song Yang
Abstract:
Two-dimensional mono-elemental material is an excellent saturable absorber candidate with low saturation intensity, large modulation depth, high nonlinearities, and fast recovery time of excited carriers. Typically, these mono-elemental material with two-dimensional structure possesses tunable bandgap from metallic to semiconducting according to different number of layers. The successful applicati…
▽ More
Two-dimensional mono-elemental material is an excellent saturable absorber candidate with low saturation intensity, large modulation depth, high nonlinearities, and fast recovery time of excited carriers. Typically, these mono-elemental material with two-dimensional structure possesses tunable bandgap from metallic to semiconducting according to different number of layers. The successful application of these materials as the saturable absorber has exploited the development of mode-locked fiber lasers. Therefore, this review is intended to provide an up-to-date information to the development of mono-elemental saturable absorber for the advances in mode-locked fiber laser, with emphasis on their material properties, synthesis process and material characterization. Meanwhile, issues and challenges of the review research topic will be highlighted and addressed with several concrete recommendations.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Recent advances of MXene saturable absorber for near-infrared mode-locked fiber laser
Authors:
Kuen Yao Lau
Abstract:
To date, MXene has been discovered for its viability as alternatives to conventional saturable absorber such as carbon nanotube and graphene. The characteristics of high nonlinear saturable absorption, astounding modulation depth, flexible bandgap tunability, and high electron density near Fermi level are the fundamentals of the MXene as an excellent saturable absorber candidate. In particular, th…
▽ More
To date, MXene has been discovered for its viability as alternatives to conventional saturable absorber such as carbon nanotube and graphene. The characteristics of high nonlinear saturable absorption, astounding modulation depth, flexible bandgap tunability, and high electron density near Fermi level are the fundamentals of the MXene as an excellent saturable absorber candidate. In particular, the research effort contributed to MXene in nonlinear ul-trafast optics are extensively growing because MXene comprises one of the largest families in 2D nanomaterials that provides huge combination possibilities by forming a class of metal carbide or metal nitride with 2D layered structure. Herein, this review summarizes the recent development on synthesis and material characterization of the MXene, the studies on its nonlinear saturable absorption and the application of the MXene saturable absorber in near-infrared mode-locked fiber laser. Finally, some issues and challenges as well as future perspectives of this novel material are discussed.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
O2-Oxidation of Individual Graphite and Graphene Nanoparticles in the 1200 to 2200 K Range: Particle-to-Particle Variations and the Evolution of the Reaction Rates and Optical Properties
Authors:
Daniel J. Rodriguez,
Chris Y. Lau,
Bryan A. Long,
Susanna An Tang,
Abigail M. Friese,
Scott L. Anderson
Abstract:
The kinetics for O2 oxidation of individual graphite and graphene platelet nanoparticles (NPs) were studied as a function of temperature (1200 to 2200 K) at varying oxygen partial pressures, using a single nanoparticle mass spectrometry method. NP temperature (TNP) was measured by measuring the NP thermal emission spectra during the kinetics studies. The initial oxidation efficiency is found to pe…
▽ More
The kinetics for O2 oxidation of individual graphite and graphene platelet nanoparticles (NPs) were studied as a function of temperature (1200 to 2200 K) at varying oxygen partial pressures, using a single nanoparticle mass spectrometry method. NP temperature (TNP) was measured by measuring the NP thermal emission spectra during the kinetics studies. The initial oxidation efficiency is found to peak in the 1200 to 1500 K range, drop** by an order of magnitude as TNP was increased above 2000 K. There were large NP-to-NP variations in the oxidation rates, attributed to variations in the NP surface structure. In addition, the oxidation efficiencies decreased, non-monotonically, as the NPs reacted, by factors of between 10 and 300. This evolution of reactivity is attributed to changes in the NP surface structure due to the combination of oxidation and annealing. The optical properties, including wavelength dependence of the emissivity, and the absorption cross section for the 532 nm heating laser, also tend to evolve as the NPs oxidize, but differently for each individual NP, presumably reflecting differences in the initial structures, and how they evolve under different reaction conditions.
△ Less
Submitted 11 August, 2020;
originally announced August 2020.
-
Rapid, $B_1$-insensitive, dual-band quasi-adiabatic saturation transfer with optimal control for complete quantification of myocardial ATP flux
Authors:
Jack J. Miller,
Ladislav Valkovič,
Matthew Kerr,
Kerstin N. Timm,
William Watson,
Justin Y. C. Lau,
Andrew Tyler,
Christopher Rodgers,
Paul A. Bottomley,
Lisa C. Heather,
Damian J. Tyler
Abstract:
Purpose: Phosphorus saturation-transfer experiments can quantify metabolic fluxes non-invasively. Typically, the forward flux through the creatine-kinase reaction is investigated by observing the decrease in phosphocreatine (PCr) after saturation of $γ$-ATP. The quantification of total ATP utilisation is currently under-explored, as it requires simultaneous saturation of inorganic phosphate (Pi) a…
▽ More
Purpose: Phosphorus saturation-transfer experiments can quantify metabolic fluxes non-invasively. Typically, the forward flux through the creatine-kinase reaction is investigated by observing the decrease in phosphocreatine (PCr) after saturation of $γ$-ATP. The quantification of total ATP utilisation is currently under-explored, as it requires simultaneous saturation of inorganic phosphate (Pi) and PCr. This is challenging, as currently available saturation pulses reduce the already-low $γ$-ATP signal present.
Methods: Using a hybrid optimal-control and Shinnar-Le-Roux method, a quasi-adiabatic RF pulse was designed for the dual-saturation of PCr and Pi to enable determination of total ATP utilisation. The pulses were evaluated in Bloch equation simulations, compared with a conventional hard-cosine DANTE saturation sequence, before application to perfused rat hearts at 11.7 Tesla.
Results: The quasi-adiabatic pulse was insensitive to a $>2.5$-fold variation in $B_1$, producing equivalent saturation with a 53% reduction in delivered pulse power and a 33-fold reduction in spillover at the minimum effective $B_1$. This enabled the complete quantification of the synthesis and degradation fluxes for ATP in 30-45 minutes in the perfused rat heart. While the net synthesis flux ($4.24\pm0.8$ mM/s, SEM) was not significantly different from degradation flux ($6.88\pm2$ mM/s, $p=0.06$) and both measures are consistent with prior work, nonlinear error analysis highlights uncertainties in the Pi-to-ATP measurement that may explain a trend suggesting a possible imbalance.
Conclusion: This work demonstrates a novel quasi-adiabatic dual-saturation RF pulse with significantly improved performance that can be used to measure ATP turnover in the heart in vivo.
△ Less
Submitted 25 November, 2020; v1 submitted 10 August, 2020;
originally announced August 2020.
-
A 3D-Hybrid-Shot Spiral Sequence for Hyperpolarized $^{13}$C Imaging
Authors:
Andrew Tyler,
Justin Y. C. Lau,
Vicky Ball,
Kerstin N. Timm,
Tony Zhou,
Damian J. Tyler,
Jack J. Miller
Abstract:
Purpose: Hyperpolarized imaging experiments have conflicting requirements of high spatial, temporal, and spectral resolution. Spectral-Spatial RF excitation has been shown to form an attractive magnetization-efficient method for hyperpolarized imaging, but the optimum readout strategy is not yet known.
Methods: In this work we propose a novel 3D hybrid-shot spiral sequence which features two con…
▽ More
Purpose: Hyperpolarized imaging experiments have conflicting requirements of high spatial, temporal, and spectral resolution. Spectral-Spatial RF excitation has been shown to form an attractive magnetization-efficient method for hyperpolarized imaging, but the optimum readout strategy is not yet known.
Methods: In this work we propose a novel 3D hybrid-shot spiral sequence which features two constant density regions that permit the retrospective reconstruction of either high spatial or high temporal resolution images post hoc, (adaptive spatiotemporal imaging) allowing greater flexibility in acquisition and reconstruction.
Results: We have implemented this sequence, both via simulation and on a pre-clinical scanner, to demonstrate its feasibility, in both a 1H phantom and with hyperpolarized 13C pyruvate in vivo. Conclusion: This sequence forms an attractive method for acquiring hyperpolarized imaging datasets, providing adaptive spatiotemporal imaging to ameliorate the conflict of spatial and temporal resolution, with significant potential for clinical translation.
△ Less
Submitted 10 July, 2020;
originally announced July 2020.
-
Interlayer exchange coupling through Ir-doped Cu spin Hall material
Authors:
Hiroto Masuda,
Takeshi Seki,
Yong-Chang Lau,
Takahide Kubota,
Koki Takanashi
Abstract:
Metallic superlattices where the magnetization vectors in the adjacent ferromagnetic layers are antiferromagnetically coupled by the interlayer exchange coupling through nonmagnetic spacer layers are systems available for the systematic study on antiferromagnetic (AF) spintronics. As a candidate of nonmagnetic spacer layer material exhibiting remarkable spin Hall effect, which is essential to achi…
▽ More
Metallic superlattices where the magnetization vectors in the adjacent ferromagnetic layers are antiferromagnetically coupled by the interlayer exchange coupling through nonmagnetic spacer layers are systems available for the systematic study on antiferromagnetic (AF) spintronics. As a candidate of nonmagnetic spacer layer material exhibiting remarkable spin Hall effect, which is essential to achieve spin-orbit torque switching, we selected the Ir-doped Cu in this study. The AF-coupling for the Co / Cu$_{95}$Ir$_{5}$ / Co was investigated, and was compared with those for the Co / Cu / Co and Co / Ir / Co. The maximum magnitude of AF-coupling strength was obtained to be 0.39 mJ/m$^{2}$ at the Cu$_{95}$Ir$_{5}$ thickness of about 0.75 nm. Furthermore, we found a large spin Hall angle of Cu$_{95}$Ir$_{5}$ in Co / Cu$_{95}$Ir$_{5}$ bilayers by carrying out spin Hall magnetoresistance and harmonic Hall voltage measurements, which are estimated to be 3 ~ 4 %. Our experimental results clearly indicate that Cu$_{95}$Ir$_{5}$ is a nonmagnetic spacer layer allowing us to achieve moderately strong AF-coupling and to generate appreciable spin-orbit torque via the spin Hall effect.
△ Less
Submitted 1 April, 2020;
originally announced April 2020.
-
Sublimation Kinetics for Individual Graphite and Graphene Nano-particles (NPs): NP-to-NP Variations and Evolving Structure-Kinetics and Structure-Emissivity Relationships
Authors:
Bryan A. Long,
Chris Y. Lau,
Daniel J. Rodriguez,
Susanna An Tang,
Scott L. Anderson
Abstract:
A single nanoparticle (NP) mass spectrometry method was used to measure sublimation rates as a function of nanoparticle temperature (TNP) for a number of individual graphite and graphene NPs. Initially, the NP sublimation rates were ca. 400 times faster than that for bulk graphite, and there were large NP-to-NP variations. Over time, the rate slowed substantially, though remaining well above the b…
▽ More
A single nanoparticle (NP) mass spectrometry method was used to measure sublimation rates as a function of nanoparticle temperature (TNP) for a number of individual graphite and graphene NPs. Initially, the NP sublimation rates were ca. 400 times faster than that for bulk graphite, and there were large NP-to-NP variations. Over time, the rate slowed substantially, though remaining well above the bulk rate. The initial activation energies (Eas) were correspondingly low and doubled as a few monolayer's worth of material were sublimed from the surfaces. The high initial rates and low Eas are attributed to large numbers of edge and other low coordination sites on the NP surfaces, and the changes are attributed to atomic-scale "smoothing" of the surface by preferential sublimation of the less stable sites. The emissivity of the NPs also changed after heating, most frequently increasing. The emissivity and sublimation rates were anti-correlated, leading to the conclusion that high densities of low-coordination sites on the NP surfaces enhances sublimation but suppresses emissivity.
△ Less
Submitted 24 July, 2020; v1 submitted 18 February, 2020;
originally announced February 2020.
-
Thermal Emission Spectroscopy of Single, Isolated Carbon Nanoparticles: Effects of Particle Size, Material, Charge, Excitation Wavelength, and Thermal History
Authors:
Bryan A. Long,
Daniel J. Rodriguez,
Chris Y. Lau,
Madeline Schultz,
Scott L. Anderson
Abstract:
Results are presented for thermal emission from individually trapped carbon nanoparticles (NPs) in the temperature range from 1000 to 2100 K. We explore the effects on the magnitude and wavelength dependency of the emissivity, epsilon (lambda), of the NP size and charge and of the type of carbon material, including graphite, graphene, diamond, carbon black, and carbon dots. In addition, it is foun…
▽ More
Results are presented for thermal emission from individually trapped carbon nanoparticles (NPs) in the temperature range from 1000 to 2100 K. We explore the effects on the magnitude and wavelength dependency of the emissivity, epsilon (lambda), of the NP size and charge and of the type of carbon material, including graphite, graphene, diamond, carbon black, and carbon dots. In addition, it is found that heating the NPs, particularly to temperatures above 1900 K, results in significant changes in the emission properties, which is attributed to changes in the distribution of surface and defect sites caused by annealing and sublimation.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Realization of Ohmic-contact and velocity saturation in organic field-effect transistors by crystallized monolayer
Authors:
Boyu Peng,
Ho Yuen Lau,
Ming Chen,
Paddy K. L. Chan
Abstract:
The contact resistance limits the down-scaling and operating range of OFETs. With the monolayer (1L) organic crystals and non-destructive metal/semiconductor interfaces, intrinsic mobility of 12.5 cm2V-1s-1 and Ohmic contact resistance of 40 ohm-cm were achieved. The on/off ratio maintained at 10^3 even at a small VDS of -0.1 mV. High current density of 4.2 uA/um was achieved with the 1L-crystal a…
▽ More
The contact resistance limits the down-scaling and operating range of OFETs. With the monolayer (1L) organic crystals and non-destructive metal/semiconductor interfaces, intrinsic mobility of 12.5 cm2V-1s-1 and Ohmic contact resistance of 40 ohm-cm were achieved. The on/off ratio maintained at 10^3 even at a small VDS of -0.1 mV. High current density of 4.2 uA/um was achieved with the 1L-crystal as the active layer. At such high current density, the velocity saturation and channel self-heating effects are observed in OFETs for the first time. In addition to the low contact resistance and high-resolution lithography, we suggest the thermal management of the high mobility OFETs will be the next major challenge to achieve high-speed densely integrated flexible electronics.
△ Less
Submitted 2 August, 2019;
originally announced August 2019.
-
Thermal Emission Spectroscopy for Single Nanoparticle Temperature Measurement: Optical System Design and Calibration
Authors:
Bryan A. Long,
Daniel J. Rodriguez,
Chris Y. Lau,
Scott L. Anderson
Abstract:
We discuss the design of an optical system that allows measurement of 600 nm to 1650 nm emission spectra for individual nanoparticles (NPs), laser heated in an electrodynamic trap in controlled atmospheres. An approach to calibration of absolute intensity vs. wavelength for very low emission intensities is discussed, and examples of NP graphite and carbon black spectra are used to illustrate the m…
▽ More
We discuss the design of an optical system that allows measurement of 600 nm to 1650 nm emission spectra for individual nanoparticles (NPs), laser heated in an electrodynamic trap in controlled atmospheres. An approach to calibration of absolute intensity vs. wavelength for very low emission intensities is discussed, and examples of NP graphite and carbon black spectra are used to illustrate the methodology.
△ Less
Submitted 26 December, 2018;
originally announced December 2018.
-
Dictionary Learning in Fourier Transform Scanning Tunneling Spectroscopy
Authors:
Sky C. Cheung,
John Y. Shin,
Yenson Lau,
Zhengyu Chen,
Ju Sun,
Yuqian Zhang,
John N. Wright,
Abhay N. Pasupathy
Abstract:
Modern high-resolution microscopes, such as the scanning tunneling microscope, are commonly used to study specimens that have dense and aperiodic spatial structure. Extracting meaningful information from images obtained from such microscopes remains a formidable challenge. Fourier analysis is commonly used to analyze the underlying structure of fundamental motifs present in an image. However, the…
▽ More
Modern high-resolution microscopes, such as the scanning tunneling microscope, are commonly used to study specimens that have dense and aperiodic spatial structure. Extracting meaningful information from images obtained from such microscopes remains a formidable challenge. Fourier analysis is commonly used to analyze the underlying structure of fundamental motifs present in an image. However, the Fourier transform fundamentally suffers from severe phase noise when applied to aperiodic images. Here, we report the development of a new algorithm based on nonconvex optimization, applicable to any microscopy modality, that directly uncovers the fundamental motifs present in a real-space image. Apart from being quantitatively superior to traditional Fourier analysis, we show that this novel algorithm also uncovers phase sensitive information about the underlying motif structure. We demonstrate its usefulness by studying scanning tunneling microscopy images of a Co-doped iron arsenide superconductor and prove that the application of the algorithm allows for the complete recovery of quasiparticle interference in this material. Our phase sensitive quasiparticle interference imaging results indicate that the pairing symmetry in optimally doped NaFeAs is consistent with a sign-changing s+- order parameter.
△ Less
Submitted 19 July, 2018;
originally announced July 2018.
-
Certification and Quantification of Multilevel Quantum Coherence
Authors:
Martin Ringbauer,
Thomas R. Bromley,
Marco Cianciaruso,
Ludovico Lami,
W. Y. Sarah Lau,
Gerardo Adesso,
Andrew G. White,
Alessandro Fedrizzi,
Marco Piani
Abstract:
Quantum coherence, present whenever a quantum system exists in a superposition of multiple classically distinct states, marks one of the fundamental departures from classical physics. Quantum coherence has recently been investigated rigorously within a resource-theoretic formalism. However, the finer-grained notion of multilevel coherence, which explicitly takes into account the number of superpos…
▽ More
Quantum coherence, present whenever a quantum system exists in a superposition of multiple classically distinct states, marks one of the fundamental departures from classical physics. Quantum coherence has recently been investigated rigorously within a resource-theoretic formalism. However, the finer-grained notion of multilevel coherence, which explicitly takes into account the number of superposed classical states, has remained relatively unexplored. A comprehensive analysis of multi-level coherence, which acts as the single-party analogue to multi-partite entanglement, is essential for understanding natural quantum processes as well as for gauging the performance of quantum technologies. Here we develop the theoretical and experimental groundwork for characterizing and quantifying multilevel coherence. We prove that non-trivial levels of purity are required for multilevel coherence, as there is a ball of states around the maximally mixed state that do not exhibit multilevel coherence in any basis. We provide a simple necessary and sufficient analytical criterion to verify multilevel coherence, which leads to a complete classification for three-level systems. We present the robustness of multilevel coherence, a bona fide quantifier which we show to be numerically computable via semidefinite programming and experimentally accessible via multilevel coherence witnesses. We further verify and lower-bound the robustness of multilevel coherence by performing a semi-device-independent phase discrimination task, implemented experimentally with four-level probes in a photonic setup. Our results contribute to understanding the operational relevance of genuine multilevel coherence, also by demonstrating the key role it plays in enhanced phase discrimination---a primitive for quantum communication and metrology---and suggest new ways to reliably test the quantum behaviour of physical systems.
△ Less
Submitted 30 August, 2018; v1 submitted 17 July, 2017;
originally announced July 2017.
-
Gravitational wave astronomy: the current status
Authors:
David Blair,
Li Ju,
Chunnong Zhao,
Linqing Wen,
Qi Chu,
Qi Fang,
RongGen Cai,
JiangRui Gao,
XueChun Lin,
Dong Liu,
Ling-An Wu,
ZongHong Zhu,
David H. Reitze,
Koji Arai,
Fan Zhang,
Raffaele Flaminio,
Xingjiang Zhu,
George Hobbs,
Richard N. Manchester,
Ryan M. Shannon,
Carlo Baccigalupi,
Peng Xu,
Xing Bian,
Zhoujian Cao,
Zi**g Chang
, et al. (14 additional authors not shown)
Abstract:
In the centenary year of Einstein's General Theory of Relativity, this paper reviews the current status of gravitational wave astronomy across a spectrum which stretches from attohertz to kilohertz frequencies. Sect. 1 of this paper reviews the historical development of gravitational wave astronomy from Einstein's first prediction to our current understanding the spectrum. It is shown that detecti…
▽ More
In the centenary year of Einstein's General Theory of Relativity, this paper reviews the current status of gravitational wave astronomy across a spectrum which stretches from attohertz to kilohertz frequencies. Sect. 1 of this paper reviews the historical development of gravitational wave astronomy from Einstein's first prediction to our current understanding the spectrum. It is shown that detection of signals in the audio frequency spectrum can be expected very soon, and that a north-south pair of next generation detectors would provide large scientific benefits. Sect. 2 reviews the theory of gravitational waves and the principles of detection using laser interferometry. The state of the art Advanced LIGO detectors are then described. These detectors have a high chance of detecting the first events in the near future. Sect. 3 reviews the KAGRA detector currently under development in Japan, which will be the first laser interferometer detector to use cryogenic test masses. Sect. 4 of this paper reviews gravitational wave detection in the nanohertz frequency band using the technique of pulsar timing. Sect. 5 reviews the status of gravitational wave detection in the attohertz frequency band, detectable in the polarisation of the cosmic microwave background, and discusses the prospects for detection of primordial waves from the big bang. The techniques described in sects. 1-5 have already placed significant limits on the strength of gravitational wave sources. Sects. 6 and 7 review ambitious plans for future space based gravitational wave detectors in the millihertz frequency band. Sect. 6 presents a roadmap for development of space based gravitational wave detectors by China while sect. 7 discusses a key enabling technology for space interferometry known as time delay interferometry.
△ Less
Submitted 9 February, 2016;
originally announced February 2016.
-
Measurement of Cosmic-ray Muons and Muon-induced Neutrons in the Aberdeen Tunnel Underground Laboratory
Authors:
S. C. Blyth,
Y. L. Chan,
X. C. Chen,
M. C. Chu,
K. X. Cui,
R. L. Hahn,
T. H. Ho,
Y. K. Hor,
Y. B. Hsiung,
B. Z. Hu,
K. K. Kwan,
M. W. Kwok,
T. Kwok,
Y. P. Lau,
K. P. Lee,
J. K. C. Leung,
K. Y. Leung,
G. L. Lin,
Y. C. Lin,
K. B. Luk,
W. H. Luk,
H. Y. Ngai,
W. K. Ngai,
S. Y. Ngan,
C. S. J. Pun
, et al. (9 additional authors not shown)
Abstract:
We have measured the muon flux and production rate of muon-induced neutrons at a depth of 611 m water equivalent. Our apparatus comprises three layers of crossed plastic scintillator hodoscopes for tracking the incident cosmic-ray muons and 760 L of gadolinium-doped liquid scintillator for producing and detecting neutrons. The vertical muon intensity was measured to be…
▽ More
We have measured the muon flux and production rate of muon-induced neutrons at a depth of 611 m water equivalent. Our apparatus comprises three layers of crossed plastic scintillator hodoscopes for tracking the incident cosmic-ray muons and 760 L of gadolinium-doped liquid scintillator for producing and detecting neutrons. The vertical muon intensity was measured to be $I_μ = (5.7 \pm 0.6) \times 10^{-6}$ cm$^{-2}$s$^{-1}$sr$^{-1}$. The yield of muon-induced neutrons in the liquid scintillator was determined to be $Y_{n} = (1.19 \pm 0.08 (stat) \pm 0.21 (syst)) \times 10^{-4}$ neutrons/($μ\cdot$g$\cdot$cm$^{-2}$). A fit to the recently measured neutron yields at different depths gave a mean muon energy dependence of $\left\langle E_μ \right\rangle^{0.76 \pm 0.03}$ for liquid-scintillator targets.
△ Less
Submitted 26 November, 2016; v1 submitted 30 September, 2015;
originally announced September 2015.
-
Squeezed-light-enhanced atom interferometry below the standard quantum limit
Authors:
Stuart S. Szigeti,
Behnam Tonekaboni,
Wing Yung S. Lau,
Samantha N. Hood,
Simon A. Haine
Abstract:
We investigate the prospect of enhancing the phase sensitivity of atom interferometers in the Mach-Zehnder configuration with squeezed light. Ultimately, this enhancement is achieved by transferring the quantum state of squeezed light to one or more of the atomic input beams, thereby allowing operation below the standard quantum limit. We analyze in detail three specific schemes that utilize (1) s…
▽ More
We investigate the prospect of enhancing the phase sensitivity of atom interferometers in the Mach-Zehnder configuration with squeezed light. Ultimately, this enhancement is achieved by transferring the quantum state of squeezed light to one or more of the atomic input beams, thereby allowing operation below the standard quantum limit. We analyze in detail three specific schemes that utilize (1) single-mode squeezed optical vacuum (i.e. low frequency squeezing), (2) two-mode squeezed optical vacuum (i.e. high frequency squeezing) transferred to both atomic inputs, and (3) two-mode squeezed optical vacuum transferred to a single atomic input. Crucially, our analysis considers incomplete quantum state transfer (QST) between the optical and atomic modes, and the effects of depleting the initially-prepared atomic source. Unsurprisingly, incomplete QST degrades the sensitivity in all three schemes. We show that by measuring the transmitted photons and using information recycling [Phys. Rev. Lett. 110, 053002 (2013)], the degrading effects of incomplete QST on the sensitivity can be substantially reduced. In particular, information recycling allows scheme (2) to operate at the Heisenberg limit irrespective of the QST efficiency, even when depletion is significant. Although we concentrate on Bose-condensed atomic systems, our scheme is equally applicable to ultracold thermal vapors.
△ Less
Submitted 22 December, 2014; v1 submitted 31 July, 2014;
originally announced August 2014.
-
An apparatus for studying spallation neutrons in the Aberdeen Tunnel laboratory
Authors:
S. C. Blyth,
Y. L. Chan,
X. C. Chen,
M. C. Chu,
R. L. Hahn,
T. H. Ho,
Y. B. Hsiung,
B. Z. Hu,
K. K. Kwan,
M. W. Kwok,
T. Kwok,
Y. P. Lau,
K. P. Lee,
J. K. C. Leung,
K. Y. Leung,
G. L. Lin,
Y. C. Lin,
K. B. Luk,
W. H. Luk,
H. Y. Ngai,
S. Y. Ngan,
C. S. J. Pun,
K. Shih,
Y. H. Tam,
R. H. M. Tsang
, et al. (6 additional authors not shown)
Abstract:
In this paper, we describe the design, construction and performance of an apparatus installed in the Aberdeen Tunnel laboratory in Hong Kong for studying spallation neutrons induced by cosmic-ray muons under a vertical rock overburden of 611 meter water equivalent (m.w.e.). The apparatus comprises of six horizontal layers of plastic-scintillator hodoscopes for determining the direction and positio…
▽ More
In this paper, we describe the design, construction and performance of an apparatus installed in the Aberdeen Tunnel laboratory in Hong Kong for studying spallation neutrons induced by cosmic-ray muons under a vertical rock overburden of 611 meter water equivalent (m.w.e.). The apparatus comprises of six horizontal layers of plastic-scintillator hodoscopes for determining the direction and position of the incident cosmic-ray muons. Sandwiched between the hodoscope planes is a neutron detector filled with 650 kg of liquid scintillator doped with about 0.06% of Gadolinium by weight for improving the efficiency of detecting the spallation neutrons. Performance of the apparatus is also presented.
△ Less
Submitted 13 August, 2013;
originally announced August 2013.
-
Pheromone Static Routing Strategy for Complex Networks
Authors:
Xiang Ling,
Henry Y. K. Lau,
Rui Jiang,
Mao-Bin Hu
Abstract:
In this paper, we adopt the concept of pheromone to generate a set of static paths that can reach the performance of global dynamic routing strategy [Phys. Rev. E 81, 016113(2010)]. In the test stage, pheromone is dropped to the nodes by packets forwarded by the global dynamic routing strategy. After that, static paths are generated according to the density of pheromone. The output paths can great…
▽ More
In this paper, we adopt the concept of pheromone to generate a set of static paths that can reach the performance of global dynamic routing strategy [Phys. Rev. E 81, 016113(2010)]. In the test stage, pheromone is dropped to the nodes by packets forwarded by the global dynamic routing strategy. After that, static paths are generated according to the density of pheromone. The output paths can greatly improve traffic systems' overall capacity on different network structures, including scale-free networks, small-world networks and random graphs. Because the paths are static, the system needs much less computational resource than the global dynamic routing strategy.
△ Less
Submitted 30 August, 2011;
originally announced August 2011.
-
Compensation of wake-field-driven energy spread in Energy Recovery Linacs
Authors:
Georg H. Hoffstaetter,
Yang Hao Lau
Abstract:
Energy Recovery Linacs provide high-energy beams, but decelerate those beams before dum** them, so that their energy is available for the acceleration of new particles. During this deceleration, any relative energy spread that is created at high energy is amplified by the ratio between high energy and dump energy. Therefore, Energy Recovery Linacs are sensitive to energy spread acquired at hig…
▽ More
Energy Recovery Linacs provide high-energy beams, but decelerate those beams before dum** them, so that their energy is available for the acceleration of new particles. During this deceleration, any relative energy spread that is created at high energy is amplified by the ratio between high energy and dump energy. Therefore, Energy Recovery Linacs are sensitive to energy spread acquired at high energy, e.g. from wake fields. One can compensate the time-correlated energy spread due to wakes via energy-dependent time-of-flight terms in appropriate sections of an Energy Recovery Linac, and via high-frequency cavities. We show that nonlinear time-of-flight terms can only eliminate odd orders in the correlation between time and energy, if these terms are created by a beam transport within the linac that is common for accelerating and decelerating beams. If these two beams are separated, so that different beam transport sections can be used to produce time-of-flight terms suitable for each, also even-order terms in the energy spread can be eliminated. As an example, we investigate the potential of using this method for the Cornell x-ray Energy Recovery Linac. Via quadratic time-of-flight terms, the energy spread can be reduced by 66%. Alternatively, since the energy spread from the dominantly resistive wake fields of the analysed accelerator is approximately harmonic in time, a high-frequency cavity could diminish the energy spread by 81%. This approach would require bunch-lengthening and recompression in separate sections for accelerating and decelerating beams. Such sections have therefore been included in Cornell's x-ray Energy Recovery Linac design.
△ Less
Submitted 16 May, 2008;
originally announced May 2008.