Showing 1–36 of 36 results for author: Larson, J

Acceptance Tests of more than 10 000 Photomultiplier Tubes for the multi-PMT Digital Optical Modules of the IceCube Upgrade

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise, C. Bellenghi , et al. (399 additional authors not shown)

Abstract: More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities… ▽ More More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities can easily be adapted to other PMTs, such that they can, e.g., be re-used for testing the PMTs for IceCube-Gen2. Single photoelectron response, high voltage dependence, time resolution, prepulse, late pulse, afterpulse probabilities, and dark rates were measured for each PMT. We describe the design of the testing facilities, the testing procedures, and the results of the acceptance tests. △ Less

Submitted 20 June, 2024; v1 submitted 30 April, 2024; originally announced April 2024.

Comments: 24 pages, 19 figures, 2 tables, submitted to JINST

Improved modeling of in-ice particle showers for IceCube event reconstruction

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, G. Anton, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise , et al. (394 additional authors not shown)

Abstract: The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstr… ▽ More The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstruction that better captures our current knowledge of ice optical properties. When evaluated on a Monte Carlo simulation set, the median angular resolution for in-ice particle showers improves by over a factor of three compared to a reconstruction based on a simplified model of the ice. The most substantial improvement is obtained when including effects of birefringence due to the polycrystalline structure of the ice. When evaluated on data classified as particle showers in the high-energy starting events sample, a significantly improved description of the events is observed. △ Less

Submitted 22 April, 2024; v1 submitted 4 March, 2024; originally announced March 2024.

Comments: 28 pages, 18 figures, 1 table, submitted to JINST, updated to account for comments received

Journal ref: 2024 JINST 19 P06026

Measurement of Atmospheric Neutrino Mixing with Improved IceCube DeepCore Calibration and Data Processing

Authors: IceCube Collaboration, R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, G. Anton, C. Argüelles, Y. Ashida, S. Athanasiadou, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, V. Basu, R. Bay, J. J. Beatty, K. -H. Becker, J. Becker Tjus, J. Beise , et al. (383 additional authors not shown)

Abstract: We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detai… ▽ More We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detail since our last study. By measuring the relative fluxes of neutrino flavors as a function of their reconstructed energies and arrival directions we constrain the atmospheric neutrino mixing parameters to be $\sin^2θ_{23} = 0.51\pm 0.05$ and $Δm^2_{32} = 2.41\pm0.07\times 10^{-3}\mathrm{eV}^2$, assuming a normal mass ordering. The resulting 40\% reduction in the error of both parameters with respect to our previous result makes this the most precise measurement of oscillation parameters using atmospheric neutrinos. Our results are also compatible and complementary to those obtained using neutrino beams from accelerators, which are obtained at lower neutrino energies and are subject to different sources of uncertainties. △ Less

Submitted 8 August, 2023; v1 submitted 24 April, 2023; originally announced April 2023.

Detection and Signal Processing for Near-Field Nanoscale Fourier Transform Infrared Spectroscopy

Authors: Jonathan M. Larson, Hans A. Bechtel, Robert Kostecki

Abstract: Researchers from a broad spectrum of scientific and engineering disciplines are increasingly using near-field infrared spectroscopic techniques to characterize materials nondestructively and with nanoscale spatial resolution. However, sub-optimal understanding of a technique's implementation can complicate data interpretation and even act as a barrier to enter the field. Here we outline the key de… ▽ More Researchers from a broad spectrum of scientific and engineering disciplines are increasingly using near-field infrared spectroscopic techniques to characterize materials nondestructively and with nanoscale spatial resolution. However, sub-optimal understanding of a technique's implementation can complicate data interpretation and even act as a barrier to enter the field. Here we outline the key detection and processing steps involved in producing scattering-type near-field nanoscale Fourier transform infrared spectra (nano-FTIR). The largely self-contained work (i) explains how normalized complex-valued nano-FTIR spectra are generated, (ii) rationalizes how the real and imaginary components of spectra relate to dispersion and absorption respectively, (iii) derives a new and generally valid equation for spectra which can be used as a springboard for additional modeling of the scattering processes, and (iv) provides an algebraic expression that can be used to extract the sample's local extinction coefficient from nano-FTIR. The algebraic expression is validated with nano-FTIR and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectra on samples of polystyrene and Kapton. △ Less

Submitted 18 March, 2023; originally announced March 2023.

Comments: 44 pages, 9 figures, supplemental material spans the last 15 pages of the pdf file

Optimization of transformer ratio and beam loading in a plasma wakefield accelerator with a structure-exploiting algorithm

Authors: Q. Su, J. Larson, T. N. Dalichaouch, F. Li, W. An, L. Hildebrand, Y. Zhao, V. Decyk, P. Alves, S. M. Wild, W. B. Mori

Abstract: Plasma-based acceleration has emerged as a promising candidate as an accelerator technology for a future linear collider or a next-generation light source. For a linear collider, the energy transfer efficiency from the drive beam to the wake and from the wake to the trailing beam must be large, while the emittance and energy spread of the trailing bunch must be preserved. One way to simultaneously… ▽ More Plasma-based acceleration has emerged as a promising candidate as an accelerator technology for a future linear collider or a next-generation light source. For a linear collider, the energy transfer efficiency from the drive beam to the wake and from the wake to the trailing beam must be large, while the emittance and energy spread of the trailing bunch must be preserved. One way to simultaneously achieve this when accelerating electrons is to use longitudinally shaped bunches and nonlinear wakes. In the linear regime, there is an analytical formalism to obtain the optimal shapes. In the nonlinear regime, however, the optimal shape of the driver to maximize the energy transfer efficiency cannot be precisely obtained because currently no theory describes the wake structure and excitation process for all degrees of nonlinearity. In addition, the ion channel radius is not well defined at the front of the wake where the plasma electrons are not fully blown out by the drive beam. We present results using a novel optimization method to effectively determine a current profile for the drive and trailing beam in PWFA that provides low energy spread, low emittance, and high acceleration efficiency. We parameterize the longitudinal beam current profile as a piecewise-linear function and define optimization objectives. For the trailing beam, the algorithm converges quickly to a nearly inverse trapezoidal trailing beam current profile similar to that predicted by the ultrarelativistic limit of the nonlinear wakefield theory. For the drive beam, the beam profile found by the optimization in the nonlinear regime that maximizes the transformer ratio also resembles that predicted by linear theory. The current profiles found from the optimization method provide higher transformer ratios compared with the linear ramp predicted by the relativistic limit of the nonlinear theory. △ Less

Submitted 23 January, 2023; originally announced January 2023.

Bayesian optimization of laser-plasma accelerators assisted by reduced physical models

Authors: A. Ferran Pousa, S. Jalas, M. Kirchen, A. Martinez de la Ossa, M. Thévenet, S. Hudson, J. Larson, A. Huebl, J. -L. Vay, R. Lehe

Abstract: Particle-in-cell simulations are among the most essential tools for the modeling and optimization of laser-plasma accelerators, since they reproduce the physics from first principles. However, the high computational cost associated with them can severely limit the scope of parameter and design optimization studies. Here, we show that a multitask Bayesian optimization algorithm can be used to mitig… ▽ More Particle-in-cell simulations are among the most essential tools for the modeling and optimization of laser-plasma accelerators, since they reproduce the physics from first principles. However, the high computational cost associated with them can severely limit the scope of parameter and design optimization studies. Here, we show that a multitask Bayesian optimization algorithm can be used to mitigate the need for such high-fidelity simulations by incorporating information from inexpensive evaluations of reduced physical models. In a proof-of-principle study, where a high-fidelity optimization with FBPIC is assisted by reduced-model simulations with Wake-T, the algorithm demonstrates an order-of-magnitude speedup. This opens a path for the cost-effective optimization of laser-plasma accelerators in large parameter spaces, an important step towards fulfilling the high beam quality requirements of future applications. △ Less

Submitted 23 December, 2022; originally announced December 2022.

Graph Neural Networks for Low-Energy Event Classification & Reconstruction in IceCube

Authors: R. Abbasi, M. Ackermann, J. Adams, N. Aggarwal, J. A. Aguilar, M. Ahlers, M. Ahrens, J. M. Alameddine, A. A. Alves Jr., N. M. Amin, K. Andeen, T. Anderson, G. Anton, C. Argüelles, Y. Ashida, S. Athanasiadou, S. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, V. Basu, R. Bay, J. J. Beatty, K. -H. Becker , et al. (359 additional authors not shown)

Abstract: IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challen… ▽ More IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challenge due to the irregular detector geometry, inhomogeneous scattering and absorption of light in the ice and, below 100 GeV, the relatively low number of signal photons produced per event. To address this challenge, it is possible to represent IceCube events as point cloud graphs and use a Graph Neural Network (GNN) as the classification and reconstruction method. The GNN is capable of distinguishing neutrino events from cosmic-ray backgrounds, classifying different neutrino event types, and reconstructing the deposited energy, direction and interaction vertex. Based on simulation, we provide a comparison in the 1-100 GeV energy range to the current state-of-the-art maximum likelihood techniques used in current IceCube analyses, including the effects of known systematic uncertainties. For neutrino event classification, the GNN increases the signal efficiency by 18% at a fixed false positive rate (FPR), compared to current IceCube methods. Alternatively, the GNN offers a reduction of the FPR by over a factor 8 (to below half a percent) at a fixed signal efficiency. For the reconstruction of energy, direction, and interaction vertex, the resolution improves by an average of 13%-20% compared to current maximum likelihood techniques in the energy range of 1-30 GeV. The GNN, when run on a GPU, is capable of processing IceCube events at a rate nearly double of the median IceCube trigger rate of 2.7 kHz, which opens the possibility of using low energy neutrinos in online searches for transient events. △ Less

Submitted 11 October, 2022; v1 submitted 7 September, 2022; originally announced September 2022.

Comments: Prepared for submission to JINST

Light-driven C-H bond activation mediated by 2D transition metal dichalcogenides

Authors: **gang Li, Di Zhang, Zhongyuan Guo, Xi Jiang, Jonathan M. Larson, Haoyue Zhu, Tianyi Zhang, Yuqian Gu, Brian Blankenship, Min Chen, Zilong Wu, Suichu Huang, Robert Kostecki, Andrew M. Minor, Costas P. Grigoropoulos, Deji Akinwande, Mauricio Terrones, Joan M. Redwing, Hao Li, Yuebing Zheng

Abstract: C-H bond activation enables the facile synthesis of new chemicals. While C-H activation in short-chain alkanes has been widely investigated, it remains largely unexplored for long-chain organic molecules. Here, we report light-driven C-H activation in complex organic materials mediated by 2D transition metal dichalcogenides (TMDCs) and the resultant solid-state synthesis of luminescent carbon dots… ▽ More C-H bond activation enables the facile synthesis of new chemicals. While C-H activation in short-chain alkanes has been widely investigated, it remains largely unexplored for long-chain organic molecules. Here, we report light-driven C-H activation in complex organic materials mediated by 2D transition metal dichalcogenides (TMDCs) and the resultant solid-state synthesis of luminescent carbon dots in a spatially-resolved fashion. We unravel the efficient H adsorption and a lowered energy barrier of C-C coupling mediated by 2D TMDCs to promote C-H activation. Our results shed light on 2D materials for C-H activation in organic compounds for applications in organic chemistry, environmental remediation, and photonic materials. △ Less

Submitted 15 November, 2023; v1 submitted 16 August, 2022; originally announced August 2022.

Journal ref: Nature Communications, 2024, 15, 5546

Comparison of Multiobjective Optimization Methods for the LCLS-II Photoinjector

Authors: Nicole Neveu, Tyler H. Chang, Paris Franz, Stephen Hudson, Jeffrey Larson

Abstract: Particle accelerators are among some of the largest science experiments in the world and can consist of thousands of components with a wide variety of input ranges. These systems can easily become unwieldy optimization problems during design and operations studies. Starting in the early 2000s, searching for better beam dynamics configurations became synonymous with heuristic optimization methods i… ▽ More Particle accelerators are among some of the largest science experiments in the world and can consist of thousands of components with a wide variety of input ranges. These systems can easily become unwieldy optimization problems during design and operations studies. Starting in the early 2000s, searching for better beam dynamics configurations became synonymous with heuristic optimization methods in the accelerator physics community. Genetic algorithms and particle swarm optimization are currently the most widely used. These algorithms can take thousands of simulation evaluations to find optimal solutions for one machine prototype. For large facilities such as the Linac Coherent Light Source (LCLS) and others, this equates to a limited exploration of many possible design configurations. In this paper, the LCLS-II photoinjector is optimized with three optimization algorithms. All optimizations were started from both a uniform random and Latin hypercube sample. In all cases, the optimizations started from Latin hypercube samples outperformed optimizations started from uniform samples. All three algorithms were able to optimize the photoinjector, with the model-based methods approximating the Pareto front in fewer simulation evaluations. This work, in combination with previous optimization observations, indicates objective penalties have a strong impact on the efficiency of such methods. In general, we recommend heuristic methods for initial optimizations and model-based methods when information about the objective space is available. △ Less

Submitted 31 October, 2022; v1 submitted 8 June, 2022; originally announced June 2022.

Low Energy Event Reconstruction in IceCube DeepCore

Authors: R. Abbasi, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, J. M. Alameddine, A. A. Alves Jr., N. M. Amin, K. Andeen, T. Anderson, G. Anton, C. Argüelles, Y. Ashida, S. Axani, X. Bai, A. Balagopal V., S. W. Barwick, B. Bastian, V. Basu, S. Baur, R. Bay, J. J. Beatty, K. -H. Becker, J. Becker Tjus , et al. (360 additional authors not shown)

Abstract: The reconstruction of event-level information, such as the direction or energy of a neutrino interacting in IceCube DeepCore, is a crucial ingredient to many physics analyses. Algorithms to extract this high level information from the detector's raw data have been successfully developed and used for high energy events. In this work, we address unique challenges associated with the reconstruction o… ▽ More The reconstruction of event-level information, such as the direction or energy of a neutrino interacting in IceCube DeepCore, is a crucial ingredient to many physics analyses. Algorithms to extract this high level information from the detector's raw data have been successfully developed and used for high energy events. In this work, we address unique challenges associated with the reconstruction of lower energy events in the range of a few to hundreds of GeV and present two separate, state-of-the-art algorithms. One algorithm focuses on the fast directional reconstruction of events based on unscattered light. The second algorithm is a likelihood-based multipurpose reconstruction offering superior resolutions, at the expense of larger computational cost. △ Less

Submitted 4 March, 2022; originally announced March 2022.

Journal ref: Eur. Phys. J. C 82 (2022) 9, 807

The Jaynes-Cummings model and its descendants

Authors: Jonas Larson, Th. K. Mavrogordatos

Abstract: The Jaynes-Cummings (JC) model has been at the forefront of quantum optics for almost six decades to date, providing one of the simplest yet intricately nonlinear formulations of light-matter interaction in modern physics. Laying most of the emphasis on the omnipresence of the model across a range of disciplines, this monograph brings up the fundamental generality of its formalism, looking at a wi… ▽ More The Jaynes-Cummings (JC) model has been at the forefront of quantum optics for almost six decades to date, providing one of the simplest yet intricately nonlinear formulations of light-matter interaction in modern physics. Laying most of the emphasis on the omnipresence of the model across a range of disciplines, this monograph brings up the fundamental generality of its formalism, looking at a wide gamut of applications in specific physical systems among several realms, including atomic physics, quantum optics, solid-state physics and quantum information science. When bringing the various pieces together to assemble our narrative, we have primarily targeted researchers in quantum physics and quantum optics. The monograph also comprises an accessible introduction for graduate students engaged with non-equilibrium quantum phase transitions, quantum computing and simulation, and quantum many-body physics. In that framework, we aim to reveal the common ground between physics and applications scattered across literature and different technological advancements. The exposition guides the reader through a vibrant field interlacing quantum optics and condensed-matter physics. All sections are devoted to the strong interconnection between theory and experiment, historically linked to the development of the various modern research directions stemming from JC physics. This is accompanied by a comprehensive list of references to the key publications that have shaped its evolution since the early 1960s. Finally, we have endeavored to keep the presentation of such a multi-sided material as concise as possible, interspersing continuous text with various illustrations alongside an economical use of mathematical expressions. △ Less

Submitted 23 October, 2023; v1 submitted 1 February, 2022; originally announced February 2022.

Comments: Published as part of IOP ebooks; ISBN: 978-0-7503-3447-1. Totalling 333 pages with 86 figures, more than 1950 references and an expanded Index. Second substantial revision, incorporating feedback from several researchers, as well as numerous references from 2022 and 2023

Derivative-Free Optimization of a Rapid-Cycling Synchrotron

Authors: Jeffrey S. Eldred, Jeffrey Larson, Misha Padidar, Eric Stern, Stefan M. Wild

Abstract: We develop and solve a constrained optimization model to identify an integrable optics rapid-cycling synchrotron lattice design that performs well in several capacities. Our model encodes the design criteria into 78 linear and nonlinear constraints, as well as a single nonsmooth objective, where the objective and some constraints are defined from the output of Synergia, an accelerator simulator. W… ▽ More We develop and solve a constrained optimization model to identify an integrable optics rapid-cycling synchrotron lattice design that performs well in several capacities. Our model encodes the design criteria into 78 linear and nonlinear constraints, as well as a single nonsmooth objective, where the objective and some constraints are defined from the output of Synergia, an accelerator simulator. We detail the difficulties of the 23-dimensional simulation-constrained decision space and establish that the space is nonempty. We use a derivative-free manifold sampling algorithm to account for structured nondifferentiability in the objective function. Our numerical results quantify the dependence of solutions on constraint parameters and the effect of the form of objective function. △ Less

Submitted 10 August, 2021; originally announced August 2021.

Comments: 24 pages, 12 figures

LeptonInjector and LeptonWeighter: A neutrino event generator and weighter for neutrino observatories

Authors: R. Abbasi, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, C. Alispach, A. A. Alves Jr., N. M. Amin, R. An, K. Andeen, T. Anderson, I. Ansseau, G. Anton, C. Argüelles, S. Axani, X. Bai, A. Balagopal V., A. Barbano, S. W. Barwick, B. Bastian, V. Basu, V. Baum, S. Baur, R. Bay , et al. (341 additional authors not shown)

Abstract: We present a high-energy neutrino event generator, called LeptonInjector, alongside an event weighter, called LeptonWeighter. Both are designed for large-volume Cherenkov neutrino telescopes such as IceCube. The neutrino event generator allows for quick and flexible simulation of neutrino events within and around the detector volume, and implements the leading Standard Model neutrino interaction p… ▽ More We present a high-energy neutrino event generator, called LeptonInjector, alongside an event weighter, called LeptonWeighter. Both are designed for large-volume Cherenkov neutrino telescopes such as IceCube. The neutrino event generator allows for quick and flexible simulation of neutrino events within and around the detector volume, and implements the leading Standard Model neutrino interaction processes relevant for neutrino observatories: neutrino-nucleon deep-inelastic scattering and neutrino-electron annihilation. In this paper, we discuss the event generation algorithm, the weighting algorithm, and the main functions of the publicly available code, with examples. △ Less

Submitted 4 May, 2021; v1 submitted 18 December, 2020; originally announced December 2020.

Comments: 28 pages, 10 figures, 3 tables

Journal ref: Comput. Phys. Commun. 266 (2021) 108018

Combined sensitivity to the neutrino mass ordering with JUNO, the IceCube Upgrade, and PINGU

Authors: IceCube-Gen2 Collaboration, :, M. G. Aartsen, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, C. Alispach, K. Andeen, T. Anderson, I. Ansseau, G. Anton, C. Argüelles, T. C. Arlen, J. Auffenberg, S. Axani, P. Backes, H. Bagherpour, X. Bai, A. Balagopal V., A. Barbano, I. Bartos, S. W. Barwick, B. Bastian , et al. (421 additional authors not shown)

Abstract: The ordering of the neutrino mass eigenstates is one of the fundamental open questions in neutrino physics. While current-generation neutrino oscillation experiments are able to produce moderate indications on this ordering, upcoming experiments of the next generation aim to provide conclusive evidence. In this paper we study the combined performance of the two future multi-purpose neutrino oscill… ▽ More The ordering of the neutrino mass eigenstates is one of the fundamental open questions in neutrino physics. While current-generation neutrino oscillation experiments are able to produce moderate indications on this ordering, upcoming experiments of the next generation aim to provide conclusive evidence. In this paper we study the combined performance of the two future multi-purpose neutrino oscillation experiments JUNO and the IceCube Upgrade, which employ two very distinct and complementary routes towards the neutrino mass ordering. The approach pursued by the $20\,\mathrm{kt}$ medium-baseline reactor neutrino experiment JUNO consists of a careful investigation of the energy spectrum of oscillated $\barν_e$ produced by ten nuclear reactor cores. The IceCube Upgrade, on the other hand, which consists of seven additional densely instrumented strings deployed in the center of IceCube DeepCore, will observe large numbers of atmospheric neutrinos that have undergone oscillations affected by Earth matter. In a joint fit with both approaches, tension occurs between their preferred mass-squared differences $ Δm_{31}^{2}=m_{3}^{2}-m_{1}^{2} $ within the wrong mass ordering. In the case of JUNO and the IceCube Upgrade, this allows to exclude the wrong ordering at $>5σ$ on a timescale of 3--7 years --- even under circumstances that are unfavorable to the experiments' individual sensitivities. For PINGU, a 26-string detector array designed as a potential low-energy extension to IceCube, the inverted ordering could be excluded within 1.5 years (3 years for the normal ordering) in a joint analysis. △ Less

Submitted 15 November, 2019; originally announced November 2019.

Journal ref: Phys. Rev. D 101, 032006 (2020)

Decadal attribution of historic temperature and ocean heat content change to anthropogenic emissions

Authors: E. J. L. Larson, R. W. Portmann, S. Solomon, D. M. Murphy

Abstract: We present an alternative method of calculating the historical effective radiative forcing using the observed temperature record and a kernel based on the CMIP5 temperature response. This estimate is the effective radiative forcing time series that the average climate model would need to simulate the observed global mean surface temperature anomalies. We further infer the anthropogenic aerosols ra… ▽ More We present an alternative method of calculating the historical effective radiative forcing using the observed temperature record and a kernel based on the CMIP5 temperature response. This estimate is the effective radiative forcing time series that the average climate model would need to simulate the observed global mean surface temperature anomalies. We further infer the anthropogenic aerosols radiative forcing as a residual using the better-known greenhouse gas radiative forcing. This allows an independent estimate of anthropogenic aerosol radiative forcing, which suggests a cooling influence due to aerosols in the early part of the 20th century. The temporal kernels are also used to calculate decadal contributions from the dominant forcing agents to present day temperature, ocean heat content, and thermosteric sea level rise. The current global mean temperature anomaly is dominated by emissions in the past two decades, while current ocean heat content is more strongly affected by earlier decades. △ Less

Submitted 29 October, 2019; originally announced October 2019.

Comments: 18 pages, 4 figures, in revision in GRL

Comparing optimization strategies for force field parameterization

Authors: Fatih G. Sen, Badri Narayanan, Jeffrey Larson, Alper Kinaci, Kiran Sasikumar, Michael J. Davis, Stefan M. Wild, Stephen K. Gray, Subramanian K. R. S. Sankaranarayanan, Maria K. Y. Chan

Abstract: Classical molecular dynamics (MD) simulations enable modeling of materials and examination of microscopic details that are not accessible experimentally. The predictive capability of MD relies on the force field (FF) used to describe interatomic interactions. FF parameters are typically determined to reproduce selected material properties computed from density functional theory (DFT) and/or measur… ▽ More Classical molecular dynamics (MD) simulations enable modeling of materials and examination of microscopic details that are not accessible experimentally. The predictive capability of MD relies on the force field (FF) used to describe interatomic interactions. FF parameters are typically determined to reproduce selected material properties computed from density functional theory (DFT) and/or measured experimentally. A common practice in parameterizing FFs is to use least-squares local minimization algorithms. Genetic algorithms (GAs) have also been demonstrated as a viable global optimization approach, even for complex FFs. However, an understanding of the relative effectiveness and efficiency of different optimization techniques for the determination of FF parameters is still lacking. In this work, we evaluate various FF parameter optimization schemes, using as example a training data set calculated from DFT for different polymorphs of Ir$O_2$. The Morse functional form is chosen for the pairwise interactions and the optimization of the parameters against the training data is carried out using (1) multi-start local optimization algorithms: Simplex, Levenberg-Marquardt, and POUNDERS, (2) single-objective GA, and (3) multi-objective GA. Using random search as a baseline, we compare the algorithms in terms of reaching the lowest error, and number of function evaluations. We also compare the effectiveness of different approaches for FF parameterization using a test data set with known ground truth (i.e generated from a specific Morse FF). We find that the performance of optimization approaches differs when using the Test data vs. the DFT data. Overall, this study provides insight for selecting a suitable optimization method for FF parameterization, which in turn can enable more accurate prediction of material properties and chemical phenomena. △ Less

Submitted 1 December, 2018; originally announced December 2018.

Simulation of Heterogeneous Atom Probe Tip Shapes Evolution during Field Evaporation Using a Level Set Method and Different Evaporation Models

Authors: Zhijie Xu, Dongsheng Li, Wei Xu, Arun Devaraj, Robert Colby, Suntharampillai Thevuthasan, B. P. Geiser, D. J. Larson

Abstract: In atom probe tomography (APT), accurate reconstruction of the spatial positions of field evaporated ions from measured detector patterns depends upon a correct understanding of the dynamic tip shape evolution and evaporation laws of component atoms. Artifacts in APT reconstructions of heterogeneous materials can be attributed to the assumption of homogeneous evaporation of all the elements in the… ▽ More In atom probe tomography (APT), accurate reconstruction of the spatial positions of field evaporated ions from measured detector patterns depends upon a correct understanding of the dynamic tip shape evolution and evaporation laws of component atoms. Artifacts in APT reconstructions of heterogeneous materials can be attributed to the assumption of homogeneous evaporation of all the elements in the material in addition to the assumption of a steady state hemispherical dynamic tip shape evolution. A level set method based specimen shape evolution model is developed in this study to simulate the evaporation of synthetic layered-structured APT tips. The simulation results of the shape evolution by the level set model qualitatively agree with the finite element method and the literature data using the finite difference method. The asymmetric evolving shape predicted by the level set model demonstrates the complex evaporation behavior of heterogeneous tip and the interface curvature can potentially lead to the artifacts in the APT reconstruction of such materials. Compared with other APT simulation methods, the new method provides smoother interface representation with the aid of the intrinsic sub-grid accuracy. Two evaporation models (linear and exponential evaporation laws) are implemented in the level set simulations and the effect of evaporation laws on the tip shape evolution is also presented. △ Less

Submitted 30 August, 2018; originally announced August 2018.

Journal ref: Computer Physics Communications, Vol 189, 2015, 106-113

Computational Techniques for the Analysis of Small Signals in High-Statistics Neutrino Oscillation Experiments

Authors: IceCube Collaboration, M. G. Aartsen, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, I. Al Samarai, D. Altmann, K. Andeen, T. Anderson, I. Ansseau, G. Anton, C. Argüelles, T. C. Arlen, J. Auffenberg, S. Axani, H. Bagherpour, X. Bai, A. Balagopal V., J. P. Barron, I. Bartos, S. W. Barwick, V. Baum, R. Bay , et al. (347 additional authors not shown)

Abstract: The current and upcoming generation of Very Large Volume Neutrino Telescopes---collecting unprecedented quantities of neutrino events---can be used to explore subtle effects in oscillation physics, such as (but not restricted to) the neutrino mass ordering. The sensitivity of an experiment to these effects can be estimated from Monte Carlo simulations. With the high number of events that will be c… ▽ More The current and upcoming generation of Very Large Volume Neutrino Telescopes---collecting unprecedented quantities of neutrino events---can be used to explore subtle effects in oscillation physics, such as (but not restricted to) the neutrino mass ordering. The sensitivity of an experiment to these effects can be estimated from Monte Carlo simulations. With the high number of events that will be collected, there is a trade-off between the computational expense of running such simulations and the inherent statistical uncertainty in the determined values. In such a scenario, it becomes impractical to produce and use adequately-sized sets of simulated events with traditional methods, such as Monte Carlo weighting. In this work we present a staged approach to the generation of binned event distributions in order to overcome these challenges. By combining multiple integration and smoothing techniques which address limited statistics from simulation it arrives at reliable analysis results using modest computational resources. △ Less

Submitted 4 December, 2019; v1 submitted 14 March, 2018; originally announced March 2018.

The IceCube Neutrino Observatory: Instrumentation and Online Systems

Authors: IceCube Collaboration, M. G. Aartsen, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, D. Altmann, K. Andeen, T. Anderson, I. Ansseau, G. Anton, M. Archinger, C. Argüelles, R. Auer, J. Auffenberg, S. Axani, J. Baccus, X. Bai, S. Barnet, S. W. Barwick, V. Baum, R. Bay, K. Beattie, J. J. Beatty , et al. (328 additional authors not shown)

Abstract: The IceCube Neutrino Observatory is a cubic-kilometer-scale high-energy neutrino detector built into the ice at the South Pole. Construction of IceCube, the largest neutrino detector built to date, was completed in 2011 and enabled the discovery of high-energy astrophysical neutrinos. We describe here the design, production, and calibration of the IceCube digital optical module (DOM), the cable sy… ▽ More The IceCube Neutrino Observatory is a cubic-kilometer-scale high-energy neutrino detector built into the ice at the South Pole. Construction of IceCube, the largest neutrino detector built to date, was completed in 2011 and enabled the discovery of high-energy astrophysical neutrinos. We describe here the design, production, and calibration of the IceCube digital optical module (DOM), the cable systems, computing hardware, and our methodology for drilling and deployment. We also describe the online triggering and data filtering systems that select candidate neutrino and cosmic ray events for analysis. Due to a rigorous pre-deployment protocol, 98.4% of the DOMs in the deep ice are operating and collecting data. IceCube routinely achieves a detector uptime of 99% by emphasizing software stability and monitoring. Detector operations have been stable since construction was completed, and the detector is expected to operate at least until the end of the next decade. △ Less

Submitted 6 February, 2024; v1 submitted 15 December, 2016; originally announced December 2016.

Comments: 82 pages, 50 figures; fix minor error in eq. 3.9 (time calibration cable delay)

Journal ref: JINST 12 P03012 (2017)

Very High-Energy Gamma-Ray Follow-Up Program Using Neutrino Triggers from IceCube

Authors: IceCube Collaboration, M. G. Aartsen, K. Abraham, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, D. Altmann, K. Andeen, T. Anderson, I. Ansseau, G. Anton, M. Archinger, C. Arguelles, J. Auffenberg, S. Axani, X. Bai, S. W. Barwick, V. Baum, R. Bay, J. J. Beatty, J. Becker-Tjus, K. -H. Becker, S. BenZvi , et al. (519 additional authors not shown)

Abstract: We describe and report the status of a neutrino-triggered program in IceCube that generates real-time alerts for gamma-ray follow-up observations by atmospheric-Cherenkov telescopes (MAGIC and VERITAS). While IceCube is capable of monitoring the whole sky continuously, high-energy gamma-ray telescopes have restricted fields of view and in general are unlikely to be observing a potential neutrino-f… ▽ More We describe and report the status of a neutrino-triggered program in IceCube that generates real-time alerts for gamma-ray follow-up observations by atmospheric-Cherenkov telescopes (MAGIC and VERITAS). While IceCube is capable of monitoring the whole sky continuously, high-energy gamma-ray telescopes have restricted fields of view and in general are unlikely to be observing a potential neutrino-flaring source at the time such neutrinos are recorded. The use of neutrino-triggered alerts thus aims at increasing the availability of simultaneous multi-messenger data during potential neutrino flaring activity, which can increase the discovery potential and constrain the phenomenological interpretation of the high-energy emission of selected source classes (e.g. blazars). The requirements of a fast and stable online analysis of potential neutrino signals and its operation are presented, along with first results of the program operating between 14 March 2012 and 31 December 2015. △ Less

Submitted 12 November, 2016; v1 submitted 6 October, 2016; originally announced October 2016.

Comments: accepted for publication in JINST

Journal ref: 2016 JINST 11 P11009

A view on the open STIRAP problem

Authors: Thomas Mathisen, Jonas Larson

Abstract: We consider the open STIRAP problem by formulating it in terms of generalized Bloch equations. Expressed in this form the resulting Liouvillian matrix is analyzed in detail. As it turns out, most of the findings of open STIRAP models can be understood from the spectrum and eigenstates of the Liouvillian matrix. As a non-hermitian matrix we particularly discuss the mathematical structure of it by i… ▽ More We consider the open STIRAP problem by formulating it in terms of generalized Bloch equations. Expressed in this form the resulting Liouvillian matrix is analyzed in detail. As it turns out, most of the findings of open STIRAP models can be understood from the spectrum and eigenstates of the Liouvillian matrix. As a non-hermitian matrix we particularly discuss the mathematical structure of it by identifying among others the physical meaning of its eigenvectors and the system's exceptional points. We also discuss the importance of the Liouvillian gap which normally implies that any state becomes mixed. However, in certain situations, for example the STIRAP model under influence of spontaneous emission, a sort of pump term appears in the equations of motion, and its effect is to counteract the gap induced decay such that coherence may prevail. As the STIRAP driving is not perfectly adiabatic, we additionally find that for spontaneous emission the presence of a non-zero Liouvillian gap actually enhances the success rate of the process. This is thus an example of a environment assisted physical operation. △ Less

Submitted 30 September, 2016; originally announced September 2016.

Comments: 12 pages, 8 figures

IceCube-Gen2 - The Next Generation Neutrino Observatory at the South Pole: Contributions to ICRC 2015

Authors: The IceCube-Gen2 Collaboration, :, M. G. Aartsen, K. Abraham, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, D. Altmann, T. Anderson, I. Ansseau, G. Anton, M. Archinger, C. Arguelles, T. C. Arlen, J. Auffenberg, S. Axani, X. Bai, I. Bartos, S. W. Barwick, V. Baum, R. Bay, J. J. Beatty, J. Becker Tjus , et al. (316 additional authors not shown)

Abstract: Papers submitted to the 34th International Cosmic Ray Conference (ICRC 2015, The Hague) by the IceCube-Gen2 Collaboration. Papers submitted to the 34th International Cosmic Ray Conference (ICRC 2015, The Hague) by the IceCube-Gen2 Collaboration. △ Less

Submitted 9 November, 2015; v1 submitted 18 October, 2015; originally announced October 2015.

Comments: 85 pages, 52 figures, Papers submitted to the 34th International Cosmic Ray Conference, The Hague 2015, v2 has a corrected author list

Imposed Magnetic Field and Hot Electron Propagation in Inertial Fusion Hohlraums

Authors: D. J. Strozzi, L. J. Perkins, M. M. Marinak, D. J. Larson, J. M. Koning, B. G. Logan

Abstract: The effects of an imposed, axial magnetic field $B_{z0}$ on hydrodynamics and energetic electrons in inertial confinement fusion (ICF) indirect-drive hohlraums are studied. We present simulations from the radiation-hydrodynamics code HYDRA of a low-adiabat ignition design for the National Ignition Facility (NIF), with and without $B_{z0}=70$ Tesla. The field's main hydrodynamic effect is to signif… ▽ More The effects of an imposed, axial magnetic field $B_{z0}$ on hydrodynamics and energetic electrons in inertial confinement fusion (ICF) indirect-drive hohlraums are studied. We present simulations from the radiation-hydrodynamics code HYDRA of a low-adiabat ignition design for the National Ignition Facility (NIF), with and without $B_{z0}=70$ Tesla. The field's main hydrodynamic effect is to significantly reduce electron thermal conduction perpendicular to the field. This results in hotter and less dense plasma on the equator between the capsule and hohlraum wall. The inner laser beams experience less inverse bremsstrahlung absorption before reaching the wall. The x-ray drive is thus stronger from the equator with the imposed field. We study superthermal, or "hot," electron dynamics with the particle-in-cell code ZUMA, using plasma conditions from HYDRA. During the early-time laser picket, hot electrons based on two-plasmon decay in the laser entrance hole (Regan et al., Phys. Plasmas 2010) are guided to the capsule by a 70 T field. 12x more energy deposits in the deuterium-tritium (DT) fuel. For plasma conditions early in peak laser power, we present mono-energetic test-case studies with ZUMA, as well as sources based on inner-beam stimulated Raman scattering. The effect of the field on DT deposition depends strongly on the source location, namely whether hot electrons are generated on field lines that connect to the capsule. △ Less

Submitted 8 October, 2015; v1 submitted 4 August, 2015; originally announced August 2015.

Comments: 21 pages. Submitted to Journal of Plasma Physics. Revised version

Journal ref: J. Plasma Phys. 81 (2015) 475810603

Determining neutrino oscillation parameters from atmospheric muon neutrino disappearance with three years of IceCube DeepCore data

Authors: IceCube Collaboration, M. G. Aartsen, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, D. Altmann, T. Anderson, C. Arguelles, T. C. Arlen, J. Auffenberg, X. Bai, S. W. Barwick, V. Baum, R. Bay, J. J. Beatty, J. Becker Tjus, K. -H. Becker, S. BenZvi, P. Berghaus, D. Berley, E. Bernardini, A. Bernhard, D. Z. Besson , et al. (279 additional authors not shown)

Abstract: We present a measurement of neutrino oscillations via atmospheric muon neutrino disappearance with three years of data of the completed IceCube neutrino detector. DeepCore, a region of denser instrumentation, enables the detection and reconstruction of atmospheric muon neutrinos between 10 GeV and 100 GeV, where a strong disappearance signal is expected. The detector volume surrounding DeepCore is… ▽ More We present a measurement of neutrino oscillations via atmospheric muon neutrino disappearance with three years of data of the completed IceCube neutrino detector. DeepCore, a region of denser instrumentation, enables the detection and reconstruction of atmospheric muon neutrinos between 10 GeV and 100 GeV, where a strong disappearance signal is expected. The detector volume surrounding DeepCore is used as a veto region to suppress the atmospheric muon background. Neutrino events are selected where the detected Cherenkov photons of the secondary particles minimally scatter, and the neutrino energy and arrival direction are reconstructed. Both variables are used to obtain the neutrino oscillation parameters from the data, with the best fit given by $Δm^2_{32}=2.72^{+0.19}_{-0.20}\times 10^{-3}\,\mathrm{eV}^2$ and $\sin^2θ_{23} = 0.53^{+0.09}_{-0.12}$ (normal mass hierarchy assumed). The results are compatible and comparable in precision to those of dedicated oscillation experiments. △ Less

Submitted 13 April, 2015; v1 submitted 27 October, 2014; originally announced October 2014.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. D 91, 072004 (2015)

Energy Reconstruction Methods in the IceCube Neutrino Telescope

Authors: IceCube Collaboration, M. G. Aartsen, R. Abbasi, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, D. Altmann, C. Arguelles, J. Auffenberg, X. Bai, M. Baker, S. W. Barwick, V. Baum, R. Bay, J. J. Beatty, J. Becker Tjus, K. -H. Becker, S. BenZvi, P. Berghaus, D. Berley, E. Bernardini, A. Bernhard, D. Z. Besson, G. Binder , et al. (263 additional authors not shown)

Abstract: Accurate measurement of neutrino energies is essential to many of the scientific goals of large-volume neutrino telescopes. The fundamental observable in such detectors is the Cherenkov light produced by the transit through a medium of charged particles created in neutrino interactions. The amount of light emitted is proportional to the deposited energy, which is approximately equal to the neutrin… ▽ More Accurate measurement of neutrino energies is essential to many of the scientific goals of large-volume neutrino telescopes. The fundamental observable in such detectors is the Cherenkov light produced by the transit through a medium of charged particles created in neutrino interactions. The amount of light emitted is proportional to the deposited energy, which is approximately equal to the neutrino energy for $ν_e$ and $ν_μ$ charged-current interactions and can be used to set a lower bound on neutrino energies and to measure neutrino spectra statistically in other channels. Here we describe methods and performance of reconstructing charged-particle energies and topologies from the observed Cherenkov light yield, including techniques to measure the energies of uncontained muon tracks, achieving average uncertainties in electromagnetic-equivalent deposited energy of $\sim 15\%$ above 10 TeV. △ Less

Submitted 10 February, 2014; v1 submitted 19 November, 2013; originally announced November 2013.

Comments: 21 pages, 23 figures. New version reflects referee comments. Accepted by J. Instrumentation

Journal ref: JINST 9 (2014), P03009

A diabatic representation of the two lowest electronic states of Li3

Authors: Elham Nour Ghassemi, Jonas Larson, Asa Larson

Abstract: Using the Multi-Reference Configuration Interaction method, the adiabatic potential energy surfaces of Li3 are computed. The two lowest electronic states are bound and exhibit a conical intersection. By fitting the calculated potential energy surfaces to the cubic Exe Jahn-Teller model we extract the effective Jahn-Teller parameters corresponding to Li3. These are used to set up the transformation… ▽ More Using the Multi-Reference Configuration Interaction method, the adiabatic potential energy surfaces of Li3 are computed. The two lowest electronic states are bound and exhibit a conical intersection. By fitting the calculated potential energy surfaces to the cubic Exe Jahn-Teller model we extract the effective Jahn-Teller parameters corresponding to Li3. These are used to set up the transformation matrix which transforms from the adiabatic to a diabatic representation. This diabatization method gives a Hamiltonian for Li3 which is free from singular adiabatic couplings and should be accurate for large internuclear distances, and it thereby allows for bound dynamics in the vicinity of the conical intersection to be explored. △ Less

Submitted 28 October, 2013; originally announced October 2013.

Comments: 10 pages, 14 figures

Journal ref: J. Chem. Phys. 140, 154304 (2014)

Measurement of South Pole ice transparency with the IceCube LED calibration system

Authors: IceCube Collaboration, M. G. Aartsen, R. Abbasi, Y. Abdou, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, D. Altmann, J. Auffenberg, X. Bai, M. Baker, S. W. Barwick, V. Baum, R. Bay, J. J. Beatty, S. Bechet, J. Becker Tjus, K. -H. Becker, M. Bell, M. L. Benabderrahmane, S. BenZvi, J. Berdermann, P. Berghaus, D. Berley , et al. (250 additional authors not shown)

Abstract: The IceCube Neutrino Observatory, approximately 1 km^3 in size, is now complete with 86 strings deployed in the Antarctic ice. IceCube detects the Cherenkov radiation emitted by charged particles passing through or created in the ice. To realize the full potential of the detector, the properties of light propagation in the ice in and around the detector must be well understood. This report present… ▽ More The IceCube Neutrino Observatory, approximately 1 km^3 in size, is now complete with 86 strings deployed in the Antarctic ice. IceCube detects the Cherenkov radiation emitted by charged particles passing through or created in the ice. To realize the full potential of the detector, the properties of light propagation in the ice in and around the detector must be well understood. This report presents a new method of fitting the model of light propagation in the ice to a data set of in-situ light source events collected with IceCube. The resulting set of derived parameters, namely the measured values of scattering and absorption coefficients vs. depth, is presented and a comparison of IceCube data with simulations based on the new model is shown. △ Less

Submitted 22 January, 2013; originally announced January 2013.

Journal ref: NIM A711:73,2013

An improved method for measuring muon energy using the truncated mean of dE/dx

Authors: IceCube collaboration, R. Abbasi, Y. Abdou, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, D. Altmann, K. Andeen, J. Auffenberg, X. Bai, M. Baker, S. W. Barwick, V. Baum, R. Bay, K. Beattie, J. J. Beatty, S. Bechet, J. Becker Tjus, K. -H. Becker, M. Bell, M. L. Benabderrahmane, S. BenZvi, J. Berdermann, P. Berghaus , et al. (255 additional authors not shown)

Abstract: The measurement of muon energy is critical for many analyses in large Cherenkov detectors, particularly those that involve separating extraterrestrial neutrinos from the atmospheric neutrino background. Muon energy has traditionally been determined by measuring the specific energy loss (dE/dx) along the muon's path and relating the dE/dx to the muon energy. Because high-energy muons (E_mu > 1 TeV)… ▽ More The measurement of muon energy is critical for many analyses in large Cherenkov detectors, particularly those that involve separating extraterrestrial neutrinos from the atmospheric neutrino background. Muon energy has traditionally been determined by measuring the specific energy loss (dE/dx) along the muon's path and relating the dE/dx to the muon energy. Because high-energy muons (E_mu > 1 TeV) lose energy randomly, the spread in dE/dx values is quite large, leading to a typical energy resolution of 0.29 in log10(E_mu) for a muon observed over a 1 km path length in the IceCube detector. In this paper, we present an improved method that uses a truncated mean and other techniques to determine the muon energy. The muon track is divided into separate segments with individual dE/dx values. The elimination of segments with the highest dE/dx results in an overall dE/dx that is more closely correlated to the muon energy. This method results in an energy resolution of 0.22 in log10(E_mu), which gives a 26% improvement. This technique is applicable to any large water or ice detector and potentially to large scintillator or liquid argon detectors. △ Less

Submitted 9 November, 2012; v1 submitted 16 August, 2012; originally announced August 2012.

Comments: 12 pages, 16 figures

Journal ref: NIM A703:190,2013

Use of event-level neutrino telescope data in global fits for theories of new physics

Authors: P. Scott, C. Savage, J. Edsjö, the IceCube Collaboration, :, R. Abbasi, Y. Abdou, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, D. Altmann, K. Andeen, J. Auffenberg, X. Bai, M. Baker, S. W. Barwick, V. Baum, R. Bay, K. Beattie, J. J. Beatty, S. Bechet, J. Becker Tjus, K. -H. Becker, M. Bell , et al. (253 additional authors not shown)

Abstract: We present a fast likelihood method for including event-level neutrino telescope data in parameter explorations of theories for new physics, and announce its public release as part of DarkSUSY 5.0.6. Our construction includes both angular and spectral information about neutrino events, as well as their total number. We also present a corresponding measure for simple model exclusion, which can be u… ▽ More We present a fast likelihood method for including event-level neutrino telescope data in parameter explorations of theories for new physics, and announce its public release as part of DarkSUSY 5.0.6. Our construction includes both angular and spectral information about neutrino events, as well as their total number. We also present a corresponding measure for simple model exclusion, which can be used for single models without reference to the rest of a parameter space. We perform a number of supersymmetric parameter scans with IceCube data to illustrate the utility of the method: example global fits and a signal recovery in the constrained minimal supersymmetric standard model (CMSSM), and a model exclusion exercise in a 7-parameter phenomenological version of the MSSM. The final IceCube detector configuration will probe almost the entire focus-point region of the CMSSM, as well as a number of MSSM-7 models that will not otherwise be accessible to e.g. direct detection. Our method accurately recovers the mock signal, and provides tight constraints on model parameters and derived quantities. We show that the inclusion of spectral information significantly improves the accuracy of the recovery, providing motivation for its use in future IceCube analyses. △ Less

Submitted 1 October, 2012; v1 submitted 3 July, 2012; originally announced July 2012.

Comments: 29 pages, 6 figures. v2 adds additional explanation in p-value derivation, matches version accepted for publication in JCAP

Journal ref: JCAP 11(2012)057

Fast-ignition design transport studies: realistic electron source, integrated PIC-hydrodynamics, imposed magnetic fields

Authors: D. J. Strozzi, M. Tabak, D. J. Larson, L. Divol, A. J. Kemp, C. Bellei, M. M. Marinak, M. H. Key

Abstract: Transport modeling of idealized, cone-guided fast ignition targets indicates the severe challenge posed by fast-electron source divergence. The hybrid particle-in-cell [PIC] code Zuma is run in tandem with the radiation-hydrodynamics code Hydra to model fast-electron propagation, fuel heating, and thermonuclear burn. The fast electron source is based on a 3D explicit-PIC laser-plasma simulation wi… ▽ More Transport modeling of idealized, cone-guided fast ignition targets indicates the severe challenge posed by fast-electron source divergence. The hybrid particle-in-cell [PIC] code Zuma is run in tandem with the radiation-hydrodynamics code Hydra to model fast-electron propagation, fuel heating, and thermonuclear burn. The fast electron source is based on a 3D explicit-PIC laser-plasma simulation with the PSC code. This shows a quasi two-temperature energy spectrum, and a divergent angle spectrum (average velocity-space polar angle of 52 degrees). Transport simulations with the PIC-based divergence do not ignite for > 1 MJ of fast-electron energy, for a modest 70 micron standoff distance from fast-electron injection to the dense fuel. However, artificially collimating the source gives an ignition energy of 132 kJ. To mitigate the divergence, we consider imposed axial magnetic fields. Uniform fields ~50 MG are sufficient to recover the artificially collimated ignition energy. Experiments at the Omega laser facility have generated fields of this magnitude by imploding a capsule in seed fields of 50-100 kG. Such imploded fields are however more compressed in the transport region than in the laser absorption region. When fast electrons encounter increasing field strength, magnetic mirroring can reflect a substantial fraction of them and reduce coupling to the fuel. A hollow magnetic pipe, which peaks at a finite radius, is presented as one field configuration which circumvents mirroring. △ Less

Submitted 8 May, 2012; originally announced May 2012.

Comments: 16 pages, 17 figures, submitted to Phys. Plasmas

Cone-Guided Fast Ignition with no Imposed Magnetic Fields

Authors: D. J. Strozzi, M. Tabak, D. J. Larson, M. M. Marinak, M. H. Key, L. Divol, A. J. Kemp, C. Bellei, H. D. Shay

Abstract: Simulations of ignition-scale fast ignition targets have been performed with the new integrated Zuma-Hydra PIC-hydrodynamic capability. We consider an idealized spherical DT fuel assembly with a carbon cone, and an artificially-collimated fast electron source. We study the role of E and B fields and the fast electron energy spectrum. For mono-energetic 1.5 MeV fast electrons, without E and B field… ▽ More Simulations of ignition-scale fast ignition targets have been performed with the new integrated Zuma-Hydra PIC-hydrodynamic capability. We consider an idealized spherical DT fuel assembly with a carbon cone, and an artificially-collimated fast electron source. We study the role of E and B fields and the fast electron energy spectrum. For mono-energetic 1.5 MeV fast electrons, without E and B fields, the energy needed for ignition is E_f^{ig} = 30 kJ. This is about 3.5x the minimal deposited ignition energy of 8.7 kJ for our fuel density of 450 g/cm^3. Including E and B fields with the resistive Ohm's law E = ηJ_b gives E_f^{ig} = 20 kJ, while using the full Ohm's law gives E_f^{ig} > 40 kJ. This is due to magnetic self-guiding in the former case, and \nabla n \times \nabla T magnetic fields in the latter. Using a realistic, quasi two-temperature energy spectrum derived from PIC laser-plasma simulations increases E_f^{ig} to (102, 81, 162) kJ for (no E/B, E = ηJ_b, full Ohm's law). This stems from the electrons being too energetic to fully stop in the optimal hot spot depth. △ Less

Submitted 10 September, 2012; v1 submitted 21 November, 2011; originally announced November 2011.

Comments: Minor revisions in response to referee comments

Anomalous molecular dynamics in the vicinity of conical intersections

Authors: Jonas Larson, Elham Nour Ghassemi, Asa Larson

Abstract: Conical intersections between molecular electronic potential surfaces greatly affect various properties of the molecule. Molecular gauge theory is capable of explaining many of these often unexpected phenomena deriving from the physics of the conical intersection. Here we give an example of anomalous dynamics in the paradigm of the Exe Jahn-Teller model, which does not allow a simple explenation i… ▽ More Conical intersections between molecular electronic potential surfaces greatly affect various properties of the molecule. Molecular gauge theory is capable of explaining many of these often unexpected phenomena deriving from the physics of the conical intersection. Here we give an example of anomalous dynamics in the paradigm of the Exe Jahn-Teller model, which does not allow a simple explenation in terms of standard molecular gauge theory. By introducing a dual gauge theory, we unwind this surprising behavior by identifying it with an intrinsic spin Hall effect. Thus, this work link knowledge of condensed matter theories with molecular vibrations. Furthermore, via ab initio calculations the findings are as well demonstrated to appear in realistic systems such as the Li3 molecule. △ Less

Submitted 29 October, 2013; v1 submitted 20 November, 2011; originally announced November 2011.

Comments: 5 pages, 2 figures

Journal ref: Euro. Phys. Lett. 101, 43001 (2013)

Band structure loops and multistability in cavity-QED

Authors: B. Prasanna Venkatesh, J. Larson, D. H. J. O'Dell

Abstract: We calculate the band structure of ultracold atoms located inside a laser-driven optical cavity. For parameters where the atom-cavity system exhibits bistability, the atomic band structure develops loop structures akin to the ones predicted for Bose-Einstein condensates in ordinary (non-cavity) optical lattices. However, in our case the nonlinearity derives from the cavity back-action rather than… ▽ More We calculate the band structure of ultracold atoms located inside a laser-driven optical cavity. For parameters where the atom-cavity system exhibits bistability, the atomic band structure develops loop structures akin to the ones predicted for Bose-Einstein condensates in ordinary (non-cavity) optical lattices. However, in our case the nonlinearity derives from the cavity back-action rather than from direct interatomic interactions. We find both bi- and tri-stable regimes associated with the lowest band, and show that the multistability we observe can be analyzed in terms of swallowtail catastrophes. Dynamic and energetic stability of the mean-field solutions is also discussed, and we show that the bistable solutions have, as expected, one unstable and two stable branches. The presence of loops in the atomic band structure has important implications for proposals concerning Bloch oscillations of atoms inside optical cavities [Peden et al., Phys. Rev. A 80, 043803 (2009), Prasanna Venkatesh et al., Phys. Rev. A 80, 063834 (2009)]. △ Less

Submitted 7 June, 2011; v1 submitted 7 January, 2011; originally announced January 2011.

Comments: 26 pages, 22 figures

Journal ref: Phys. Rev. A83:063606,2011

Jahn-Teller systems from a cavity QED perspective

Authors: Jonas Larson

Abstract: Jahn-Teller systems and the Jahn-Teller effect are discussed in terms of cavity QED models. By expressing the field modes in a quadrature representation, it is shown that certain setups of a two-level system interacting with a bimodal cavity is described by the Jahn-Teller $E\timesε$ Hamiltonian. We identify the corresponding adiabatic potential surfaces and the conical intersection. The effects… ▽ More Jahn-Teller systems and the Jahn-Teller effect are discussed in terms of cavity QED models. By expressing the field modes in a quadrature representation, it is shown that certain setups of a two-level system interacting with a bimodal cavity is described by the Jahn-Teller $E\timesε$ Hamiltonian. We identify the corresponding adiabatic potential surfaces and the conical intersection. The effects of a non-zero geometrical Berry phase, governed by encircling the conical intersection, are studied in detail both theoretically and numerically. The numerical analysis is carried out by applying a wave packet propagation method, more commonly used in molecular or chemical physics, and analytic expressions for the characteristic time scales are presented. It is found that the collapse-revival structure is greatly influenced by the geometrical phase and as a consequence, the field intensities contain direct information about this phase. We also mention the link between the Jahn-Teller effect and the Dicke phase transition in cavity QED. △ Less

Submitted 23 September, 2008; v1 submitted 28 April, 2008; originally announced April 2008.

Comments: 10 pages, 6 figures. Replaced with final version

Journal ref: Phys. Rev. A 78, 033833 (2008)

Quantum interference structures in trapped ion dynamics beyond the Lamb-Dicke and rotating wave approximations

Authors: Dong Wang, Tony Hansson, Asa Larson, Hans O. Karlsson, Jonas Larson

Abstract: We apply wave packet methods to study an ion-trap system in the strong excitation regime imposing neither the rotating wave nor the Lamb-Dicke approximations. By this approach we show the existence of states with restricted phase space evolution, as a genuine consequence of quantum interference between wave packet fractions. A particular instance of such a state oscillates between maximal entang… ▽ More We apply wave packet methods to study an ion-trap system in the strong excitation regime imposing neither the rotating wave nor the Lamb-Dicke approximations. By this approach we show the existence of states with restricted phase space evolution, as a genuine consequence of quantum interference between wave packet fractions. A particular instance of such a state oscillates between maximal entanglement and pure disentanglement between the constitute subsystems. The characteristic crossover time is very rapid making them suitable for state preparations of EPR or Schrodinger cat states. Over longer time periods the dynamics of these states exhibits collapse-revival patterns with well resolved fractional revivals in autocorrelation, inversion and entanglement. △ Less

Submitted 16 May, 2008; v1 submitted 4 March, 2008; originally announced March 2008.

Comments: 11 pages, 5 figures. Replaced with revised version. Phys. Rev. A 77, 053808 (2008)

Exploring closed-loop feedback control using experiments in optics

Authors: K. A. Jensen, R. J. Larson, S. D. Bergeson, E. F. McCormack

Abstract: We present two experiments in closed-loop feedback control. In the first experiment, students control the pointing angle of a laser to "lock" the laser onto a "target." In the second, students stabilize the pathlength difference in two arms of a Michelson interferometer. These experiments are appropriate for electronics and optics laboratory classes for junior and senior level students. We present two experiments in closed-loop feedback control. In the first experiment, students control the pointing angle of a laser to "lock" the laser onto a "target." In the second, students stabilize the pathlength difference in two arms of a Michelson interferometer. These experiments are appropriate for electronics and optics laboratory classes for junior and senior level students. △ Less

Submitted 27 June, 2001; originally announced June 2001.

Comments: 6 pages, LaTeX, submitted to Am. J. Phys