Showing 1–38 of 38 results for author: Lang, J

A detailed survey of the parallel mean free path of solar energetic particle protons and electrons

Authors: J. T. Lang, R. D. Strauss, N. E. Engelbrecht, J. P. van den Berg, N. Dresing, D. Ruffolo, R. Bandyopadhyay

Abstract: In this work, more than a dozen solar energetic particle (SEP) events are identified where the source region is magnetically well-connected to at least one spacecraft at 1~au. The observed intensity-time profiles, for all available proton and electron energy channels, are compared to results computed using a numerical 1D SEP transport model in order to derive the parallel mean free paths (pMFPs) a… ▽ More In this work, more than a dozen solar energetic particle (SEP) events are identified where the source region is magnetically well-connected to at least one spacecraft at 1~au. The observed intensity-time profiles, for all available proton and electron energy channels, are compared to results computed using a numerical 1D SEP transport model in order to derive the parallel mean free paths (pMFPs) as a function of energy (or rigidity) at 1~au. These inversion results are then compared to theoretical estimates of the pMFP, using observed turbulence quantities with observationally-motivated variations as input. For protons, a very good comparison between inversion and theoretical results is obtained. It is shown that the observed inter-event variations in the inversion pMFP values can be explained by natural variations in the background turbulence values. For electrons, there is relatively good agreement with pMFPs derived assuming the dam** model of dynamical turbulence, although the theoretical values are extremely sensitive to the details of the turbulence dissipation range which themselves display a high level of variation. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Comments: Accepted to ApJ

Complete Active Space Iterative Coupled Cluster Theory

Authors: Robin Feldmann, Max Mörchen, Jakub Lang, Michał\ Lesiuk, Markus Reiher

Abstract: In this work, we investigate the possibility of improving multireference-driven coupled cluster (CC) approaches with an algorithm that iteratively combines complete active space (CAS) calculations with tailored CC and externally corrected CC. This is accomplished by establishing a feedback loop between the CC and CAS parts of a calculation through similarity transformation of the Hamiltonian with… ▽ More In this work, we investigate the possibility of improving multireference-driven coupled cluster (CC) approaches with an algorithm that iteratively combines complete active space (CAS) calculations with tailored CC and externally corrected CC. This is accomplished by establishing a feedback loop between the CC and CAS parts of a calculation through similarity transformation of the Hamiltonian with those CC amplitudes that are not encompassed by the active space. We denote this approach the complete active space iterative coupled cluster (CASiCC) ansatz. We investigate its efficiency and accuracy in the singles and doubles approximation by studying the prototypical molecules H4, H8, H2O, and N2. Our results demonstrate that CASiCC systematically improves on the single-reference CCSD and the ecCCSD methods across entire potential energy curves, while retaining modest computational costs. However, the tailored coupled cluster method shows superior performance in the strong correlation regime suggesting that its accuracy is based on error compensation. We find that the iterative version of externally corrected and tailored coupled cluster methods converge to the same results. △ Less

Submitted 9 April, 2024; originally announced April 2024.

Comments: 38 pages, 7 figures, 1 table

An Implantable Piezofilm Middle Ear Microphone: Performance in Human Cadaveric Temporal Bones

Authors: John Z. Zhang, Lukas Graf, Annesya Banerjee, Aaron Yeiser, Christopher I. McHugh, Ioannis Kymissis, Jeffrey H. Lang, Elizabeth S. Olson, Hideko Heidi Nakajima

Abstract: Purpose: One of the major reasons that totally implantable cochlear microphones are not readily available is the lack of good implantable microphones. An implantable microphone has the potential to provide a range of benefits over external microphones for cochlear implant users including the filtering ability of the outer ear, cosmetics, and usability in all situations. This paper presents results… ▽ More Purpose: One of the major reasons that totally implantable cochlear microphones are not readily available is the lack of good implantable microphones. An implantable microphone has the potential to provide a range of benefits over external microphones for cochlear implant users including the filtering ability of the outer ear, cosmetics, and usability in all situations. This paper presents results from experiments in human cadaveric ears of a piezofilm microphone concept under development as a possible component of a future implantable microphone system for use with cochlear implants. This microphone is referred to here as a drum microphone (DrumMic) that senses the robust and predictable motion of the umbo, the tip of the malleus. Methods: The performance was measured of five DrumMics inserted in four different human cadaveric temporal bones. Sensitivity, linearity, bandwidth, and equivalent input noise were measured during these experiments using a sound stimulus and measurement setup. Results: The sensitivity of the DrumMics was found to be tightly clustered across different microphones and ears despite differences in umbo and middle ear anatomy. The DrumMics were shown to behave linearly across a large dynamic range (46 dB SPL to 100 dB SPL) across a wide bandwidth (100 Hz to 8 kHz). The equivalent input noise (0.1-10 kHz) of the DrumMic and amplifier referenced to the ear canal was measured to be 54 dB SPL and estimated to be 46 dB SPL after accounting for the pressure gain of the outer ear. Conclusion: The results demonstrate that the DrumMic behaves robustly across ears and fabrication. The equivalent input noise performance was shown to approach that of commercial hearing aid microphones. To advance this demonstration of the DrumMic concept to a future prototype implantable in humans, work on encapsulation, biocompatibility, connectorization will be required. △ Less

Submitted 22 December, 2023; originally announced December 2023.

The UmboMic: A PVDF Cantilever Microphone

Authors: Aaron J. Yeiser, Emma F. Wawrzynek, John Z. Zhang, Lukas Graf, Christopher I. McHugh, Ioannis Kymissis, Elizabeth S. Olson, Jeffrey H. Lang, Hideko Heidi Nakajima

Abstract: Objective: We present the "UmboMic," a prototype piezoelectric cantilever microphone designed for future use with totally-implantable cochlear implants. Methods: The UmboMic sensor is made from polyvinylidene difluoride (PVDF) because of its low Young's modulus and biocompatibility. The sensor is designed to fit in the middle ear and measure the motion of the underside of the eardrum at the umbo.… ▽ More Objective: We present the "UmboMic," a prototype piezoelectric cantilever microphone designed for future use with totally-implantable cochlear implants. Methods: The UmboMic sensor is made from polyvinylidene difluoride (PVDF) because of its low Young's modulus and biocompatibility. The sensor is designed to fit in the middle ear and measure the motion of the underside of the eardrum at the umbo. To maximize its performance, we developed a low noise charge amplifier in tandem with the UmboMic sensor. This paper presents the performance of the UmboMic sensor and amplifier in fresh cadaveric human temporal bones. Results: When tested in human temporal bones, the UmboMic apparatus achieves an equivalent input noise of 32.3 dB SPL over the frequency range 100 Hz to 7 kHz, good linearity, and a flat frequency response to within 10 dB from about 100 Hz to 6 kHz. Conclusion: These results demonstrate the feasibility of a PVDF-based microphone when paired with a low-noise amplifier. The reported UmboMic apparatus is comparable in performance to a conventional hearing aid microphone. Significance: The proof-of-concept UmboMic apparatus is a promising step towards creating a totally-implantable cochlear implant. A completely internal system would enhance the quality of life of cochlear implant users. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Atomic Bethe logarithm in the mean-field approximation

Authors: Michał Lesiuk, Jakub Lang

Abstract: In this work we develop and implement a method for calculation of the Bethe logarithm for many-electron atoms. This quantity is required to evaluate the leading-order quantum electrodynamics correction to the energy and properties of atomic and molecular systems beyond the Dirac theory (the Lamb shift). The proposed formalism is based on the mean-field representation of the ground-state electronic… ▽ More In this work we develop and implement a method for calculation of the Bethe logarithm for many-electron atoms. This quantity is required to evaluate the leading-order quantum electrodynamics correction to the energy and properties of atomic and molecular systems beyond the Dirac theory (the Lamb shift). The proposed formalism is based on the mean-field representation of the ground-state electronic wavefunction and of the response functions required in the Schwartz method [C. Schwartz, Phys. Rev. {\bf 123}, 1700 (1961)]. We discuss difficulties encountered in the calculations with the emphasis on the specific basis set requirements in the vicinity of the atomic nucleus. This problem is circumvented by introducing a modified basis set of exponential functions which are able to accurately represent the gradient of hydrogen-like orbitals. The Bethe logarithm is computed for ground electronic states of atoms from hydrogen to magnesium and, additionally, for argon. Whenever possible, the results are compared with the available reference data from the literature. In general, the mean-field approximation introduces a surprisingly small error in the calculated values, suggesting that the electron correlation effects are of minor importance in determination of the Bethe logarithm. Finally, we propose a robust scheme to evaluate the Lamb shift for arbitrary light molecular systems at little computational cost. As an illustration, the method is used to calculate Lamb shifts of the vibrational levels of the nitrogen molecule. △ Less

Submitted 19 November, 2023; v1 submitted 13 September, 2023; originally announced September 2023.

Journal ref: Phys. Rev. A 108, 042817 (2023)

Controlling Dual-Comb Soliton Motion inside a single Fiber Laser Cavity

Authors: Julia A. Lang, Sarah R. Hutter, Alfred Leitenstorfer, Georg Herink

Abstract: Ultrafast science builds on dynamic compositions of precisely timed light pulses1 and evolving sequences of pulses are observed inside almost every mode-locked laser. However, the underlying physics remains barely controlled and utilized until now. Here, we demonstrate the fast and deterministic control of soliton motion for the generation of programmable ultrashort pulse patterns from a dual-comb… ▽ More Ultrafast science builds on dynamic compositions of precisely timed light pulses1 and evolving sequences of pulses are observed inside almost every mode-locked laser. However, the underlying physics remains barely controlled and utilized until now. Here, we demonstrate the fast and deterministic control of soliton motion for the generation of programmable ultrashort pulse patterns from a dual-comb mode-locked Er:fiber laser. Specifically, we harness intra-cavity modulation of individual solitons and their laser-intrinsic dynamics to facilitate the rapid tuning of two interlaced soliton combs. Upon extra-cavity temporal recombination of both combs, we obtain reconfigurable pulse patterns at arbitrary delays. Using high-throughput real-time spectral interferometry, we resolve the short-range inter-soliton motion upon external stimuli and we demonstrate the high-speed swee** of picosecond pump-probe-delays and programmable free-form trajectories. This work introduces a novel approach to soliton control and paves the way for ultrafast instruments at unprecedented high tuning, cycling and acquisition speeds. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Comments: 8 pages, 4 figures

Thermophysical properties of argon gas from improved two-body interaction potential

Authors: Jakub Lang, Michal Przybytek, Michal Lesiuk

Abstract: A new ab initio interaction potential for the electronic ground state of the argon dimer has been developed. The new potential uses previously calculated accurate Born--Oppenheimer potential while significantly improving the description of relativistic effects by including the two-electron Darwin and orbit-orbit corrections. Moreover, retardation of the electromagnetic interactions is taken into a… ▽ More A new ab initio interaction potential for the electronic ground state of the argon dimer has been developed. The new potential uses previously calculated accurate Born--Oppenheimer potential while significantly improving the description of relativistic effects by including the two-electron Darwin and orbit-orbit corrections. Moreover, retardation of the electromagnetic interactions is taken into account in the long-range part of the potential and leading-order quantum electrodynamics correction is calculated. Spectroscopic properties of the argon dimer such as positions of vibrational levels, bond-dissociation energy, and rotational and centrifugal-distortion constants are reported. We show that the inclusion of the two-electron relativistic terms results in a destabilization of the previously discovered weakly bound ninth vibrational state. Finally, thermophysical properties of the argon gas including pressure and acoustic virial coefficients, as well as transport properties -- viscosity and thermal conductivity -- are evaluated using the new potential. For the thermophysical properties, the obtained ab initio values are somewhat less accurate than the most recent experimental results. However, the opposite is true for the transport properties, where the theoretical results calculated in this work have significantly smaller uncertainties than the data derived from measurements. △ Less

Submitted 9 April, 2024; v1 submitted 28 April, 2023; originally announced April 2023.

Comments: 52 pages, 9 figures

Three-body potential and third virial coefficients for helium including relativistic and nuclear-motion effects

Authors: Jakub Lang, Giovanni Garberoglio, Michal Przybytek, Malgorzata Jeziorska, Bogumil Jeziorski

Abstract: The non-additive three-body interaction potential for helium was computed using the coupled-cluster theory and the full configuration interaction method. The obtained potential comprises an improved nonrelativistic Born--Oppenheimer energy and the leading relativistic and nuclear-motion corrections. The mean absolute uncertainty of our calculations due to the incompleteness of the orbital basis se… ▽ More The non-additive three-body interaction potential for helium was computed using the coupled-cluster theory and the full configuration interaction method. The obtained potential comprises an improved nonrelativistic Born--Oppenheimer energy and the leading relativistic and nuclear-motion corrections. The mean absolute uncertainty of our calculations due to the incompleteness of the orbital basis set was determined employing complete-basis-set extrapolation techniques and was found to be 1.2%. For three helium atoms forming an equilateral triangle with the side length of 5.6~bohr our three-body potential amounts to $-$90.6~mK, with an estimated uncertainty of 0.5~mK. An analytic function, developed to accurately fit the computed three-body interaction energies, was chosen to correctly describe the asymptotic behavior of the three-body potential for trimer configurations corresponding to both the three-atomic and the atom-diatom fragmentation channels. For large triangles with sides $r_{12}$, $r_{23}$, and $r_{31}$, the potential takes correctly into account all angular terms decaying as $r_{12}^{-l} r_{23}^{-m} r_{31}^{-n}$ with $l+m+n \le 14$ for the nonrelativistic Born--Oppenheimer energy and $l+m+n \le 9$ for the post-Born--Oppenheimer corrections. We also developed a short-range analytic function describing the local behavior of the total uncertainty of the computed three-body interaction energies. Using both fits we calculated the third pressure and acoustic virial coefficients for helium and their uncertainties for a wide range of temperatures. The results of these calculations were compared with available experimental data and with previous theoretical determinations. The estimated uncertainties of present calculations are 3-5 times smaller than those reported in the best previous work. △ Less

Submitted 16 April, 2023; originally announced April 2023.

Comments: 68 pages, 10 figures, 9 tables

Hilbert space multireference coupled clusters tailored by matrix product states

Authors: Ondrej Demel, Jan Brandejs, Jakub Lang, Jiri Brabec, Libor Veis, Ors Legeza, Jiri Pittner

Abstract: The DMRG method, despite its favorable scaling, it is in practice not suitable for computations of dynamic correlation. Several approaches to include that in post-DMRG methods exist; in our group we focused on the tailored-CC (TCC) approach. This method works well in many situations, however, in exactly degenerate cases (with two or more determinants of equal weight), it exhibits a bias towards th… ▽ More The DMRG method, despite its favorable scaling, it is in practice not suitable for computations of dynamic correlation. Several approaches to include that in post-DMRG methods exist; in our group we focused on the tailored-CC (TCC) approach. This method works well in many situations, however, in exactly degenerate cases (with two or more determinants of equal weight), it exhibits a bias towards the reference determinant representing the Fermi vacuum. Although in some cases it is possible to use a compensation scheme to avoid this bias for energy differences, as we did in a previous work on the singlet-triplet gap in the tetramethylenethane (TME) molecule, it is certainly a drawback. In order to overcome the single-reference bias of the TCC method, we have developed a Hilbert-space multireference version of tailored CC, which can treat several determinants on an equal footing. We have employed a multireference analysis of the DMRG wave function in the matrix product state form to get the active amplitudes for each reference determinant and their constant contribution to the effective Hamiltonian. We have implemented and compared the performance of three Hilbert-space MRCC variants - the state universal one, and the Brillouin-Wigner and Mukherjee's state specific ones. We have assessed these approaches on the cyclobutadiene and tetramethylenethane (TME) molecules, which are both diradicals with exactly degenerate determinants at a certain geometry. Two DMRG active spaces have been selected based on orbital entropies, while the MRCC active space comprised the HOMO and LUMO orbitals needed for description of the diradical. We have also investigated the sensitivity of the results on orbital rotation of the HOMO-LUMO pair, as it is well known that Hilbert-space MRCC methods are not invariant to such transformations. △ Less

Submitted 4 April, 2023; originally announced April 2023.

Collision-induced three-body polarizability of helium

Authors: Jakub Lang, Michal Lesiuk, Michal Przybytek, Bogumil Jeziorski

Abstract: We present first-principles theoretical determination of the three-body polarizability and the third dielectric virial coefficient of helium. Coupled-cluster theory and the full configuration interaction procedure were used to perform required electronic structure calculations. The mean absolute relative uncertainty of the trace of the three-body polarizability tensor, resulting from the incomplet… ▽ More We present first-principles theoretical determination of the three-body polarizability and the third dielectric virial coefficient of helium. Coupled-cluster theory and the full configuration interaction procedure were used to perform required electronic structure calculations. The mean absolute relative uncertainty of the trace of the three-body polarizability tensor, resulting from the incompleteness of orbital basis set, was determined using extrapolation techniques. Additional uncertainty due to approximate treatment of triple and the neglect of higher excitations was estimated using full configuration interaction calculations. An analytic function was developed to describe the behavior of the polarizability and its asymptotic decay to three-atomic and atom-diatom fragmentation channels. We also developed an analytic function describing the local behavior of the total uncertainty of our calculations. Using both fits we calculated the third dielectric virial coefficient and its uncertainty using the classical and semiclassical Feynman-Hibbs approaches. The results of our calculations were compared with available experimental data and with recent Path-Integral Monte Carlo (PIMC) calculations employing the so-called superposition approximation of the three-body polarizability. For temperatures above 200 K we observed significant discrepancy between the classical results obtained using either the superposition approximation or the ab initio computed polarizability. The theoretical data reported in this work eliminate the main accuracy bottleneck of the development of optical pressure standard and are expected to facilitate further progress in the field of quantum thermal metrology △ Less

Submitted 18 November, 2022; originally announced November 2022.

Comments: 30 pages, 7 figures

Tilted Dirac cones and asymmetric conical diffraction in photonic Lieb-kagome lattices

Authors: Jean-Philippe Lang, Haissam Hanafi, Jörg Imbrock, Cornelia Denz

Abstract: The Lieb lattice and the kagome lattice, which are both well known for their Dirac cones and flat bands, can be continuously converted into each other by a shearing transformation. During this transformation, the flat band is destroyed, but the Dirac cones remain and become tilted, with types I, II, and III occurring for different parameters. In this work, we first study these tilted Dirac cones u… ▽ More The Lieb lattice and the kagome lattice, which are both well known for their Dirac cones and flat bands, can be continuously converted into each other by a shearing transformation. During this transformation, the flat band is destroyed, but the Dirac cones remain and become tilted, with types I, II, and III occurring for different parameters. In this work, we first study these tilted Dirac cones using a tight-binding model, revealing how they can be engineered into the different types. We then demonstrate conical diffraction in a photonic lattice realization of the Lieb-kagome lattice using split-step beam propagation simulations, obtaining evidence of the presence of Dirac cones tilted in different directions. Finally, we performed experiments with photonic lattices laser-written in fused silica (SiO$_2$) to validate the results of the simulations. These studies advance the understanding of the Lieb-kagome lattice and tilted Dirac cones in general and provide a basis for further research into this interesting tunable lattice system. △ Less

Submitted 8 November, 2022; originally announced November 2022.

On-chip single-photon subtraction by individual silicon vacancy centers in a laser-written diamond waveguide

Authors: Michael K. Koch, Michael Hoese, Vibhav Bharadwaj, Johannes Lang, John P. Hadden, Roberta Ramponi, Fedor Jelezko, Shane M. Eaton, Alexander Kubanek

Abstract: Modifying light fields at single-photon level is a key challenge for upcoming quantum technologies and can be realized in a scalable manner through integrated quantum photonics. Laser-written diamond photonics offers three-dimensional fabrication capabilities and large mode-field diameters matched to fiber optic technology, though limiting the cooperativity at the single-emitter level. To realize… ▽ More Modifying light fields at single-photon level is a key challenge for upcoming quantum technologies and can be realized in a scalable manner through integrated quantum photonics. Laser-written diamond photonics offers three-dimensional fabrication capabilities and large mode-field diameters matched to fiber optic technology, though limiting the cooperativity at the single-emitter level. To realize large cooperativities, we combine excitation of single shallow-implanted silicon vacancy centers via large numerical aperture optics with detection assisted by laser-written type-II waveguides. We demonstrate single-emitter extinction measurements with a cooperativity of 0.153 and a beta factor of 13% yielding 15.3% as lower bound for the quantum efficiency of a single emitter. The transmission of resonant photons reveals single-photon subtraction from a quasi-coherent field resulting in super-Poissonian light statistics. Our architecture enables single quantum level light field engineering in an integrated design which can be fabricated in three dimensions and with a natural connectivity to optical fiber arrays. △ Less

Submitted 2 November, 2021; originally announced November 2021.

Comments: 8 pages, 4 figures

Quantum-Probe Field Microscopy of Ultrafast Terahertz Excitations

Authors: Moritz B. Heindl, Nicholas Kirkwood, Tobias Lauster, Julia A. Lang, Markus Retsch, Paul Mulvaney, Georg Herink

Abstract: Rapid evolutions of microscopic fields govern the majority of elementary excitations in condensed matter and drive microelectronic currents at increasing frequencies. Beyond nominal "radio frequencies", however, access to local electric waveforms remains a challenge. Several imaging schemes resolve sub-wavelength fields up to multi-Terahertz (THz) frequencies - including scanning-probe techniques,… ▽ More Rapid evolutions of microscopic fields govern the majority of elementary excitations in condensed matter and drive microelectronic currents at increasing frequencies. Beyond nominal "radio frequencies", however, access to local electric waveforms remains a challenge. Several imaging schemes resolve sub-wavelength fields up to multi-Terahertz (THz) frequencies - including scanning-probe techniques, electro-optic sampling or recent ultrafast electron microscopy. Yet, various constraints on sample geometries, acquisition speed and maximum fields limit applications. Here, we introduce ubiquitous far-field microscopy of ultrafast local electric fields based on drop-cast quantum-dot probes. Our approach, termed Quantum-probe Field Microscopy (QFIM), combines fluorescence imaging of visible photons with phase-resolved sampling of electric fields deeply in the sub-wavelength regime. We capture stroboscopic movies of localized and propagating ultrafast Terahertz excitations with sub-picosecond temporal resolution. The scheme employs field-driven modulations of optical absorption in colloidal quantum-dots via the quantum-confined Stark-effect, accessible via far-field luminescence. The QFIM approach is compatible with strong-field sample excitation and sub-micrometer resolution - introducing a route towards ultrafast field imaging in active nanostructures during operation. △ Less

Submitted 5 April, 2021; originally announced April 2021.

Comments: 6 pages, 4 figures

Adaptive Single- and Multilevel Stochastic Collocation Methods for Uncertain Gas Transport in Large-Scale Networks

Authors: Jens Lang, Pia Domschke, Elisa Strauch

Abstract: In this paper, we are concerned with the quantification of uncertainties that arise from intra-day oscillations in the demand for natural gas transported through large-scale networks. The short-term transient dynamics of the gas flow is modelled by a hierarchy of hyperbolic systems of balance laws based on the isentropic Euler equations. We extend a novel adaptive strategy for solving elliptic PDE… ▽ More In this paper, we are concerned with the quantification of uncertainties that arise from intra-day oscillations in the demand for natural gas transported through large-scale networks. The short-term transient dynamics of the gas flow is modelled by a hierarchy of hyperbolic systems of balance laws based on the isentropic Euler equations. We extend a novel adaptive strategy for solving elliptic PDEs with random data, recently proposed and analysed by Lang, Scheichl, and Silvester [J. Comput. Phys., 419:109692, 2020], to uncertain gas transport problems. Sample-dependent adaptive meshes and a model refinement in the physical space is combined with adaptive anisotropic sparse Smolyak grids in the stochastic space. A single-level approach which balances the discretization errors of the physical and stochastic approximations and a multilevel approach which additionally minimizes the computational costs are considered. Two examples taken from a public gas library demonstrate the reliability of the error control of expectations calculated from random quantities of interest, and the further use of stochastic interpolants to, e.g., approximate probability density functions of minimum and maximum pressure values at the exits of the network. △ Less

Submitted 7 December, 2020; originally announced December 2020.

Comments: 20 pages, 7 figures

MSC Class: 65C20; 65C30; 65N35; 65M75

An integrated magnetometry platform with stackable waveguide-assisted detection channels for sensing arrays

Authors: Michael Hoese, Michael K. Koch, Vibhav Bharadwaj, Johannes Lang, John P. Hadden, Reina Yoshizaki, Argyro N. Giakoumaki, Roberta Ramponi, Fedor Jelezko, Shane M. Eaton, Alexander Kubanek

Abstract: The negatively-charged NV$^-$-center in diamond has shown great success in nanoscale, high-sensitivity magnetometry. Efficient fluorescence detection is crucial for improving the sensitivity. Furthermore, integrated devices enable practicable sensors. Here, we present a novel architecture which allows us to create NV$^-$-centers a few nanometers below the diamond surface, and at the same time in t… ▽ More The negatively-charged NV$^-$-center in diamond has shown great success in nanoscale, high-sensitivity magnetometry. Efficient fluorescence detection is crucial for improving the sensitivity. Furthermore, integrated devices enable practicable sensors. Here, we present a novel architecture which allows us to create NV$^-$-centers a few nanometers below the diamond surface, and at the same time in the mode field maximum of femtosecond-laser-written type-II waveguides. We experimentally verify the coupling efficiency, showcase the detection of magnetic resonance signals through the waveguides and perform first proof-of-principle experiments in magnetic field and temperature sensing. The sensing task can be operated via the waveguide without direct light illumination through the sample, which marks an important step for magnetometry in biological systems which are fragile to light. In the future, our approach will enable the development of two-dimensional sensing arrays facilitating spatially and temporally correlated magnetometry. △ Less

Submitted 4 December, 2020; originally announced December 2020.

Comments: 10 pages, 4 figures

Journal ref: Phys. Rev. Applied 15, 054059 (2021)

How to deform an egg yolk? On the Study of Soft Matter Deformation in a Liquid Environment

Authors: Ji Lang, Rungun Nathan, Qianhong Wu

Abstract: In this paper, we report a novel experimental and theoretical study to examine the response of a soft capsule bathed in a liquid environment to sudden external impacts. Taking an egg yolk as an example, we found that the soft matter is not sensitive to translational impacts, but is very sensitive to rotational, especially decelerating-rotational impacts, during which the centrifugal force and the… ▽ More In this paper, we report a novel experimental and theoretical study to examine the response of a soft capsule bathed in a liquid environment to sudden external impacts. Taking an egg yolk as an example, we found that the soft matter is not sensitive to translational impacts, but is very sensitive to rotational, especially decelerating-rotational impacts, during which the centrifugal force and the shape of the membrane together play a critical role causing the deformation of the soft object. This finding, as the first study of its kind, reveals the fundamental physics behind the motion and deformation of a membrane-bound soft object, e.g., egg yolk, cells, soft brain matter, etc., in response to external impacts. △ Less

Submitted 21 October, 2020; originally announced October 2020.

Comments: *To whom correspondence should be addressed: [email protected]

Precise Fabrication of Uniform Molecular Gaps for Active Nanoscale Devices

Authors: Farnaz Niroui, Mayuran Saravanapavanantham, **chi Han, Jatin J. Patil, Timothy M. Swager, Jeffrey H. Lang, Vladimir Bulović

Abstract: Molecules with versatile functionalities and well-defined structures, can serve as building blocks for extreme nanoscale devices. This requires their precise integration into functional heterojunctions, most commonly in the form of metal-molecule-metal architectures. Structural damage and nonuniformities caused by current fabrication techniques, however, limit their effective incorporation. Here,… ▽ More Molecules with versatile functionalities and well-defined structures, can serve as building blocks for extreme nanoscale devices. This requires their precise integration into functional heterojunctions, most commonly in the form of metal-molecule-metal architectures. Structural damage and nonuniformities caused by current fabrication techniques, however, limit their effective incorporation. Here, we present a hybrid fabrication approach enabling uniform molecular gaps. Template-stripped lithographically-patterned gold electrodes with sub-nanometer roughness are used as the bottom contacts upon which the molecular layer is formed through self-assembly. The top contacts are assembled using dielectrophoretic trap** of colloidal gold nanorods, resulting in uniform sub-5 nm junctions. In these electrically-active designs, we further explore the possibility of mechanical tunability. The presence of molecules may help control sub-nanometer mechanical modulation which is conventionally difficult to achieve due to instabilities caused by surface adhesive forces. Our approach is versatile, providing a platform to develop and study active molecular gaps towards functional nanodevices. △ Less

Submitted 26 June, 2020; originally announced June 2020.

Bidirectional Self-Folding with Atomic Layer Deposition Nanofilms for Microscale Origami

Authors: Baris Bircan, Marc Z. Miskin, Robert J. Lang, Michael C. Cao, Kyle J. Dorsey, Muhammad G. Salim, Wei Wang, David A. Muller, Paul L. McEuen, Itai Cohen

Abstract: Origami design principles are scale invariant and enable direct miniaturization of origami structures provided the sheets used for folding have equal thickness to length ratios. Recently, seminal steps have been taken to fabricate microscale origami using unidirectionally actuated sheets with nanoscale thickness. Here, we extend the full power of origami-inspired fabrication to nanoscale sheets by… ▽ More Origami design principles are scale invariant and enable direct miniaturization of origami structures provided the sheets used for folding have equal thickness to length ratios. Recently, seminal steps have been taken to fabricate microscale origami using unidirectionally actuated sheets with nanoscale thickness. Here, we extend the full power of origami-inspired fabrication to nanoscale sheets by engineering bidirectional folding with 4 nm thick atomic layer deposition (ALD) SiNx-SiO2 bilayer films. Strain differentials within these bilayers result in bending, producing microscopic radii of curvature. We lithographically pattern these bilayers and localize the bending using rigid panels to fabricate a variety of complex micro-origami devices. Upon release, these devices self-fold according to prescribed patterns. Our approach combines planar semiconductor microfabrication methods with computerized origami design, making it easy to fabricate and deploy such microstructures en masse. These devices represent an important step forward in the fabrication and assembly of deployable micromechanical systems that can interact with and manipulate micro- and nanoscale environments. △ Less

Submitted 18 June, 2020; originally announced June 2020.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters, copyright American Chemical Society after peer review. To access the final edited and published work see: https://pubs.acs.org/articlesonrequest/AOR-JJHKJZVTJF4JFWSYZ2NW

Fluid Guided CVD Growth for Large-scale Monolayer Two-dimensional Materials

Authors: Dong Zhou, Ji Lang, Nicholas Yoob, Raymond R. Unocic, Qianhong Wu, Bo Li

Abstract: Atmospheric pressure chemical vapor deposition (APCVD) has been used extensively for synthesizing two-dimensional (2D) materials, due to its low cost and promise for high-quality monolayer crystal synthesis. However, the understanding of the reaction mechanism and the key parameters affecting the APCVD processes is still in its embryonic stage. Hence, the scalability of the APCVD method in achievi… ▽ More Atmospheric pressure chemical vapor deposition (APCVD) has been used extensively for synthesizing two-dimensional (2D) materials, due to its low cost and promise for high-quality monolayer crystal synthesis. However, the understanding of the reaction mechanism and the key parameters affecting the APCVD processes is still in its embryonic stage. Hence, the scalability of the APCVD method in achieving large scale continuous film remains very poor. Here, we use MoSe2 as a model system and present a fluid guided growth strategy for understanding and controlling the growth of 2D materials. Through the integration of experiment and computational fluid dynamics (CFD) analysis in the full-reactor scale, we identified three key parameters: precursor mixing, fluid velocity and shear stress, which play a critical role in the APCVD process. By modifying the geometry of the growth setup, to enhance precursor mixing and decrease nearby velocity shear rate and adjusting flow direction, we have successfully obtained inch-scale monolayer MoSe2. This unprecedented success of achieving scalable 2D materials through fluidic design lays the foundation for designing new CVD systems to achieve the scalable synthesis of nanomaterials. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Ground State of the Fe(II)-porphyrin Model System Corresponds to the Quintet State: A DFT and DMRG-based Tailored CC Study

Authors: Andrej Antalík, Dana Nachtigallová, Rabindranath Lo, Mikuláš Matoušek, Jakub Lang, Örs Legeza, Jiří Pittner, Pavel Hobza, Libor Veis

Abstract: Fe(II)-porphyrins (FeP) play an important role in many reactions relevant to material science and biological processes, due to their closely lying spin states. However, this small energetic separation also makes it challenging to establish the correct spin state ordering. Although the prevalent opinion is that these systems posses the triplet ground state, the recent experiment on Fe(II)-phthalocy… ▽ More Fe(II)-porphyrins (FeP) play an important role in many reactions relevant to material science and biological processes, due to their closely lying spin states. However, this small energetic separation also makes it challenging to establish the correct spin state ordering. Although the prevalent opinion is that these systems posses the triplet ground state, the recent experiment on Fe(II)-phthalocyanine under conditions matching those of an isolated molecule points toward the quintet ground state. We present a thorough study of FeP model by means of the density functional theory and density matrix renormalization group based tailored coupled clusters, in which we address all previously discussed correlation effects. We examine the importance of geometrical parameters, the Fe-N distances in particular, and conclude that the system possesses the quintet ground state, which is in our calculations well-separated from the triplet state. △ Less

Submitted 12 June, 2020; v1 submitted 14 January, 2020; originally announced January 2020.

A Silicon MEMS EM vibration energy harvester

Authors: Y. Yang, U. Radhakrishna, D. Ward, A. P. Chandrakasan, J. H. Lang

Abstract: This paper presents an optimized silicon-MEMS electromagnetic vibration energy harvester suitable for applications such as machine health monitoring. The harvester comprises a DRIE-etched silicon suspension, and pick-and-place N42 NdBFe magnets and copper coils, housed in a 3D-printed package. The harvester is designed to operate near 50 Hz with 0.5-1 g vibrations using a long-stroke suspension. M… ▽ More This paper presents an optimized silicon-MEMS electromagnetic vibration energy harvester suitable for applications such as machine health monitoring. The harvester comprises a DRIE-etched silicon suspension, and pick-and-place N42 NdBFe magnets and copper coils, housed in a 3D-printed package. The harvester is designed to operate near 50 Hz with 0.5-1 g vibrations using a long-stroke suspension. Multi-domain harvester optimization results in an open-circuit voltage of 1.7 V, a matched-load power output of 2.2 mW, and a matched-load power-output density of 1.23 mW/cm3 at 1.1 g with a resonance frequency of 76.3 Hz. △ Less

Submitted 4 October, 2019; originally announced October 2019.

Comments: PowerMEMS 2018 conference

Co-optimization of a piezoelectric energy harvesting system for broadband operation

Authors: Sheng Zhao, Ujwal Radhakrishna, Steve Hanly, Jianguo Ma, Jeffrey H Lang, Dennis Buss

Abstract: The goal of this research is to increase the bandwidth (BW) over which substantial energy can be harvested using a piezoelectric energy harvester (PEH). The key innovation is the use of bias-flip (BF) electronics at the output of a PEH having a large electromechanical coupling coefficient $κ_{e}^{2}$. For a PEH with large $κ_{e}^{2}$, the open-circuit resonance frequency $f_{oc}$ is substantially… ▽ More The goal of this research is to increase the bandwidth (BW) over which substantial energy can be harvested using a piezoelectric energy harvester (PEH). The key innovation is the use of bias-flip (BF) electronics at the output of a PEH having a large electromechanical coupling coefficient $κ_{e}^{2}$. For a PEH with large $κ_{e}^{2}$, the open-circuit resonance frequency $f_{oc}$ is substantially larger than the short-circuit resonance frequency $f_{sc}$. Over the intervening range, the reactive part of the conjugate matched load impedance is small, and can be approximated using BF electronics in which the BF voltage is sufficiently small and the BF losses are small. This results in a large BW over which substantial energy can be harvested. Experimental results using a commercially available PEH are presented to demonstrate this concept. Design guidelines are provided for achieving PEHs having increased $κ_{e}^{2}$. △ Less

Submitted 4 October, 2019; v1 submitted 1 October, 2019; originally announced October 2019.

Journal ref: PowerMEMS 2018, Dec 2018, Daytona Beach, United States

Near-linear Scaling in DMRG-based Tailored Coupled Clusters: An Implementation of DLPNO-TCCSD and DLPNO-TCCSD(T)

Authors: Jakub Lang, Andrej Antalík, Libor Veis, Jan Brandejs, Jiří Brabec, Örs Legeza, Jiří Pittner

Abstract: We present a new implementation of DMRG-based tailored coupled clusters method (TCCSD), which employs the domain-based local pair natural orbital approach (DLPNO-TCCSD). Compared to the previous LPNO version of the method, the new implementation is more accurate, offers more favorable scaling and provides more consistent behavior across the variety of systems. On top of the singles and doubles, we… ▽ More We present a new implementation of DMRG-based tailored coupled clusters method (TCCSD), which employs the domain-based local pair natural orbital approach (DLPNO-TCCSD). Compared to the previous LPNO version of the method, the new implementation is more accurate, offers more favorable scaling and provides more consistent behavior across the variety of systems. On top of the singles and doubles, we include the perturbative triples correction (T), which is able to retrieve even more dynamic correlation. The methods were tested on three systems: tetramethyleneethane, oxo-Mn(Salen) and Iron(II)-porphyrin model. The first two were revisited to assess the performance with respect to LPNO-TCCSD. For oxo-Mn(Salen), we retrieved between 99.8-99.9% of the total canonical correlation energy which is the improvement of 0.2% over the LPNO version in less than 63% of the total LPNO runtime. Similar results were obtained for Iron(II)-porphyrin. When the perturbative triples correction was employed, irrespective of the active space size or system, the obtained energy differences between two spin states were within the chemical accuracy of 1 kcal/mol using the default DLPNO settings. △ Less

Submitted 14 April, 2020; v1 submitted 29 July, 2019; originally announced July 2019.

Comments: Updated version: 15 pages. arXiv admin note: text overlap with arXiv:1905.06833

High-resolution, accurate MR-TOF-MS for short-lived, exotic nuclei of few events in their ground and low-lying isomeric states

Authors: S. Ayet, C. Hornung, J. Ebert, W. R. Plaß, T. Dickel, H. Geissel, C. Scheidenberger, J. Bergmann, F. Greiner, E. Haettner, C. Jesch, W. Lippert, I. Mardor, I. Miskun, Z. Patyk, S. Pietri, A. Pihktelev, S. Purushothaman, M. P. Reiter, A. -K. Rink, H. Weick, M. I. Yavor, S. Bagchi, V. Charviakova, P. Constantin , et al. (15 additional authors not shown)

Abstract: Mass measurements of fission and projectile fragments, produced via $^{238}$U and $^{124}$Xe primary beams, have been performed with the multiple-reflection time-of-flight mass spectrometer (MR-TOF-MS) of the FRS Ion Catcher with a mass resolving powers (FWHM) up to 410,000 and an uncertainty of $6\cdot 10^{-8}$. The nuclides were produced and separated in-flight with the fragment separator FRS at… ▽ More Mass measurements of fission and projectile fragments, produced via $^{238}$U and $^{124}$Xe primary beams, have been performed with the multiple-reflection time-of-flight mass spectrometer (MR-TOF-MS) of the FRS Ion Catcher with a mass resolving powers (FWHM) up to 410,000 and an uncertainty of $6\cdot 10^{-8}$. The nuclides were produced and separated in-flight with the fragment separator FRS at 300 to 1000 MeV/u and thermalized in a cryogenic stop** cell. The data-analysis procedure was developed to determine with highest accuracy the mass values and the corresponding uncertainties for the most challenging conditions: down to a few events in a spectrum and overlap** distributions, characterized only by a broader common peak shape. With this procedure, the resolution of low-lying isomers is increased by a factor of up to three compared to standard data analysis. The ground-state masses of 31 short-lived nuclides of 15 different elements with half-lives down to 17.9~ms and count rates as low as 11 events per nuclide were determined. This is the first direct mass measurement for seven nuclides. The excitation energies and the isomer-to-ground state ratios of six isomeric states with excitation energies down to about 280~keV were measured. For nuclides with known mass values, the average relative deviation from the literature values is $(2.9 \pm 6.2) \cdot 10^{-8}$. The measured two-neutron separation energies and their slopes near and at the N=126 and Z=82 shell closures indicate a strong element-dependent binding energy of the first neutron above the closed proton shell Z=82. The experimental results deviate strongly from the theoretical predictions, especially for N=126 and N=127. △ Less

Submitted 31 January, 2019; originally announced January 2019.

Journal ref: Phys. Rev. C 99, 064313 (2019)

Fast logarithmic Fourier-Laplace transform of nonintegrable functions

Authors: Johannes Lang, Bernhard Frank

Abstract: We present an efficient and very flexible numerical fast Fourier-Laplace transform, that extends the logarithmic Fourier transform (LFT) introduced by Haines and Jones [Geophys. J. Int. 92(1):171 (1988)] for functions varying over many scales to nonintegrable functions. In particular, these include cases of the asymptotic form $f(ν\to0)\simν^a$ and $f(|ν|\to\infty)\simν^b$ with arbitrary real… ▽ More We present an efficient and very flexible numerical fast Fourier-Laplace transform, that extends the logarithmic Fourier transform (LFT) introduced by Haines and Jones [Geophys. J. Int. 92(1):171 (1988)] for functions varying over many scales to nonintegrable functions. In particular, these include cases of the asymptotic form $f(ν\to0)\simν^a$ and $f(|ν|\to\infty)\simν^b$ with arbitrary real $a>b$. Furthermore, we prove that the numerical transform converges exponentially fast in the number of data points, provided that the function is analytic in a cone $|\Imν|<θ|\Reν|$ with a finite opening angle $θ$ around the real axis and satisfies $|f(ν)f(1/ν)|<ν^c$ as $ν\to 0$ with a positive constant $c$, which is the case for the class of functions with power-law tails. Based on these properties we derive ideal transformation parameters and discuss how the logarithmic Fourier transform can be applied to convolutions. The ability of the logarithmic Fourier transform to perform these operations on multiscale (non-integrable) functions with power-law tails with exponentially small errors makes it the method of choice for many physical applications, which we demonstrate on typical examples. These include benchmarks against known analytical results inaccessible to other numerical methods, as well as physical models near criticality. △ Less

Submitted 4 November, 2019; v1 submitted 22 December, 2018; originally announced December 2018.

Comments: 14 pages, 8 figures

Journal ref: Phys. Rev. E 100, 053302 (2019)

Parametric model order reduction and its application to inverse analysis of large nonlinear coupled cardiac problems

Authors: Martin R. Pfaller, Maria Cruz Varona, Johannes Lang, Cristóbal Bertoglio, Wolfgang A. Wall

Abstract: Predictive high-fidelity finite element simulations of human cardiac mechanics co\-mmon\-ly require a large number of structural degrees of freedom. Additionally, these models are often coupled with lumped-parameter models of hemodynamics. High computational demands, however, slow down model calibration and therefore limit the use of cardiac simulations in clinical practice. As cardiac models rely… ▽ More Predictive high-fidelity finite element simulations of human cardiac mechanics co\-mmon\-ly require a large number of structural degrees of freedom. Additionally, these models are often coupled with lumped-parameter models of hemodynamics. High computational demands, however, slow down model calibration and therefore limit the use of cardiac simulations in clinical practice. As cardiac models rely on several patient-specific parameters, just one solution corresponding to one specific parameter set does not at all meet clinical demands. Moreover, while solving the nonlinear problem, 90\% of the computation time is spent solving linear systems of equations. We propose a novel approach to reduce only the structural dimension of the monolithically coupled structure-windkessel system by projection onto a lower-dimensional subspace. We obtain a good approximation of the displacement field as well as of key scalar cardiac outputs even with very few reduced degrees of freedom while achieving considerable speedups. For subspace generation, we use proper orthogonal decomposition of displacement snapshots. To incorporate changes in the parameter set into our reduced order model, we provide a comparison of subspace interpolation methods. We further show how projection-based model order reduction can be easily integrated into a gradient-based optimization and demonstrate its performance in a real-world multivariate inverse analysis scenario. Using the presented projection-based model order reduction approach can significantly speed up model personalization and could be used for many-query tasks in a clinical setting. △ Less

Submitted 29 October, 2018; originally announced October 2018.

Verification of long wavelength electromagnetic modes with a gyrokinetic-fluid hybrid model in the XGC code

Authors: Robert Hager, Jianying Lang, Choong-Seock Chang, Seung-Hoe Ku, Yang Chen, Scott E. Parker, Mark F. Adams

Abstract: As an alternative option to kinetic electrons, the gyrokinetic total-f particle-in-cell (PIC) code XGC1 has been extended to the MHD/fluid type electromagnetic regime by combining gyrokinetic PIC ions with massless drift-fluid electrons analogous to Chen and Parker, Physics of Plasmas 8, 441 (2001). Two representative long wavelength modes, shear Alfvén waves and resistive tearing modes, are verif… ▽ More As an alternative option to kinetic electrons, the gyrokinetic total-f particle-in-cell (PIC) code XGC1 has been extended to the MHD/fluid type electromagnetic regime by combining gyrokinetic PIC ions with massless drift-fluid electrons analogous to Chen and Parker, Physics of Plasmas 8, 441 (2001). Two representative long wavelength modes, shear Alfvén waves and resistive tearing modes, are verified in cylindrical and toroidal magnetic field geometries. △ Less

Submitted 16 February, 2017; originally announced February 2017.

Random Spatial Networks: Small Worlds without Clustering, Traveling Waves, and Hop-and-Spread Disease Dynamics

Authors: John Lang, Hans De Sterck, Jamieson L. Kaiser, Joel C. Miller

Abstract: Random network models play a prominent role in modeling, analyzing and understanding complex phenomena on real-life networks. However, a key property of networks is often neglected: many real-world networks exhibit spatial structure, the tendency of a node to select neighbors with a probability depending on physical distance. Here, we introduce a class of random spatial networks (RSNs) which gener… ▽ More Random network models play a prominent role in modeling, analyzing and understanding complex phenomena on real-life networks. However, a key property of networks is often neglected: many real-world networks exhibit spatial structure, the tendency of a node to select neighbors with a probability depending on physical distance. Here, we introduce a class of random spatial networks (RSNs) which generalizes many existing random network models but adds spatial structure. In these networks, nodes are placed randomly in space and joined in edges with a probability depending on their distance and their individual expected degrees, in a manner that crucially remains analytically tractable. We use this network class to propose a new generalization of small-world networks, where the average shortest path lengths in the graph are small, as in classical Watts-Strogatz small-world networks, but with close spatial proximity of nodes that are neighbors in the network playing the role of large clustering. Small-world effects are demonstrated on these spatial small-world networks without clustering. We are able to derive partial integro-differential equations governing susceptible-infectious-recovered disease spreading through an RSN, and we demonstrate the existence of traveling wave solutions. If the distance kernel governing edge placement decays slower than exponential, the population-scale dynamics are dominated by long-range hops followed by local spread of traveling waves. This provides a theoretical modeling framework for recent observations of how epidemics like Ebola evolve in modern connected societies, with long-range connections seeding new focal points from which the epidemic locally spreads in a wavelike manner. △ Less

Submitted 4 February, 2017; originally announced February 2017.

Very High-Energy Gamma-Ray Follow-Up Program Using Neutrino Triggers from IceCube

Authors: IceCube Collaboration, M. G. Aartsen, K. Abraham, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, D. Altmann, K. Andeen, T. Anderson, I. Ansseau, G. Anton, M. Archinger, C. Arguelles, J. Auffenberg, S. Axani, X. Bai, S. W. Barwick, V. Baum, R. Bay, J. J. Beatty, J. Becker-Tjus, K. -H. Becker, S. BenZvi , et al. (519 additional authors not shown)

Abstract: We describe and report the status of a neutrino-triggered program in IceCube that generates real-time alerts for gamma-ray follow-up observations by atmospheric-Cherenkov telescopes (MAGIC and VERITAS). While IceCube is capable of monitoring the whole sky continuously, high-energy gamma-ray telescopes have restricted fields of view and in general are unlikely to be observing a potential neutrino-f… ▽ More We describe and report the status of a neutrino-triggered program in IceCube that generates real-time alerts for gamma-ray follow-up observations by atmospheric-Cherenkov telescopes (MAGIC and VERITAS). While IceCube is capable of monitoring the whole sky continuously, high-energy gamma-ray telescopes have restricted fields of view and in general are unlikely to be observing a potential neutrino-flaring source at the time such neutrinos are recorded. The use of neutrino-triggered alerts thus aims at increasing the availability of simultaneous multi-messenger data during potential neutrino flaring activity, which can increase the discovery potential and constrain the phenomenological interpretation of the high-energy emission of selected source classes (e.g. blazars). The requirements of a fast and stable online analysis of potential neutrino signals and its operation are presented, along with first results of the program operating between 14 March 2012 and 31 December 2015. △ Less

Submitted 12 November, 2016; v1 submitted 6 October, 2016; originally announced October 2016.

Comments: accepted for publication in JINST

Journal ref: 2016 JINST 11 P11009

The Statistical Mechanics of Human Weight Change

Authors: John C. Lang, Hans De Sterck, Daniel M. Abrams

Abstract: In the context of the global obesity epidemic, it is important to know who becomes obese and why. However, the processes that determine the changing shape of Body Mass Index (BMI) distributions in high-income societies are not well-understood. Here we establish the statistical mechanics of human weight change, providing a fundamental new understanding of human weight distributions. By compiling an… ▽ More In the context of the global obesity epidemic, it is important to know who becomes obese and why. However, the processes that determine the changing shape of Body Mass Index (BMI) distributions in high-income societies are not well-understood. Here we establish the statistical mechanics of human weight change, providing a fundamental new understanding of human weight distributions. By compiling and analysing the largest data set so far of year-over-year BMI changes, we find, strikingly, that heavy people on average strongly decrease their weight year-over-year, and light people increase their weight. This drift towards the centre of the BMI distribution is balanced by diffusion resulting from random fluctuations in diet and physical activity that are, notably, proportional in size to BMI. We formulate a stochastic mathematical model for BMI dynamics, deriving a theoretical shape for the BMI distribution and offering a mechanism to explain the ongoing right-skewed broadening of BMI distributions over time. The model also provides new quantitative support for the hypothesis that peer-to-peer social influence plays a measurable role in BMI dynamics. More broadly, our results demonstrate a remarkable analogy with drift-diffusion mechanisms that are well-known from the physical sciences and finance. △ Less

Submitted 29 September, 2016; originally announced October 2016.

Piezoresistive Foam Sensor Arrays for Marine Applications

Authors: Jeff E. Dusek, Michael S. Triantafyllou, Jeffrey H. Lang

Abstract: Spatially-dense pressure measurements are needed on curved surfaces in marine environments to provide marine vehicles with the detailed, real-time measurements of the near-field flow necessary to improve performance through flow control. To address this challenge, a waterproof and conformal pressure sensor array comprising carbon black-doped-silicone closed-cell foam (CBPDMS foam) was developed fo… ▽ More Spatially-dense pressure measurements are needed on curved surfaces in marine environments to provide marine vehicles with the detailed, real-time measurements of the near-field flow necessary to improve performance through flow control. To address this challenge, a waterproof and conformal pressure sensor array comprising carbon black-doped-silicone closed-cell foam (CBPDMS foam) was developed for use in marine applications. The response of the CBPDMS foam sensor arrays was characterized using periodic hydrodynamic pressure stimuli from vertical plunging, from which a piecewise polynomial calibration was developed to describe the sensor response. Inspired by the distributed pressure and velocity sensing capabilities of the fish lateral line, the CBPDMS foam sensor arrays have significant advantages over existing commercial sensors for distributed flow reconstruction and control. Experimental results have shown the sensor arrays to have sensitivity on the order of 5 Pascal, dynamic range of 50-500 Pascal; are contained in a waterproof and completely flexible package, and have material cost less than $10 per sensor. △ Less

Submitted 7 March, 2016; originally announced March 2016.

A Hierarchy of Linear Threshold Models for the Spread of Political Revolutions on Social Networks

Authors: John C. Lang, Hans De Sterck

Abstract: We study a linear threshold agent-based model (ABM) for the spread of political revolutions on social networks using empirical network data. We propose new techniques for building a hierarchy of simplified ordinary differential equation (ODE) based models that aim to capture essential features of the ABM, including effects of the actual networks, and give insight in the parameter regime transition… ▽ More We study a linear threshold agent-based model (ABM) for the spread of political revolutions on social networks using empirical network data. We propose new techniques for building a hierarchy of simplified ordinary differential equation (ODE) based models that aim to capture essential features of the ABM, including effects of the actual networks, and give insight in the parameter regime transitions of the ABM. We relate the ABM and the hierarchy of models to a population-level compartmental ODE model that we proposed previously for the spread of political revolutions [1], which is shown to be mathematically consistent with the proposed ABM and provides a way to analyze the global behaviour of the ABM. This consistency with the linear threshold ABM also provides further justification a posteriori for the compartmental model of [1]. Extending concepts from epidemiological modelling, we define a basic reproduction number $R_0$ for the linear threshold ABM and apply it to predict ABM behaviour on empirical networks. In small-scale numerical tests we investigate experimentally the differences in spreading behaviour that occur under the linear threshold ABM model when applied to some empirical online and offline social networks, searching for quantitative evidence that political revolutions may be facilitated by the modern online social networks of social media. △ Less

Submitted 16 January, 2015; originally announced January 2015.

MSC Class: 91D10; 91D30; 70G60; 37M99

The influence of societal individualism on a century of tobacco use: modelling the prevalence of smoking

Authors: John C. Lang, Daniel M. Abrams, Hans De Sterck

Abstract: Smoking of tobacco is predicted to cause approximately six million deaths worldwide in 2014. Responding effectively to this epidemic requires a thorough understanding of how smoking behaviour is transmitted and modified. Here, we present a new mathematical model of the social dynamics that cause cigarette smoking to spread in a population. Our model predicts that more individualistic societies wil… ▽ More Smoking of tobacco is predicted to cause approximately six million deaths worldwide in 2014. Responding effectively to this epidemic requires a thorough understanding of how smoking behaviour is transmitted and modified. Here, we present a new mathematical model of the social dynamics that cause cigarette smoking to spread in a population. Our model predicts that more individualistic societies will show faster adoption and cessation of smoking. Evidence from a new century-long composite data set on smoking prevalence in 25 countries supports the model, with direct implications for public health interventions around the world. Our results suggest that differences in culture between societies can measurably affect the temporal dynamics of a social spreading process, and that these effects can be understood via a quantitative mathematical model matched to observations. △ Less

Submitted 8 July, 2014; originally announced July 2014.

MSC Class: 91D10 (Primary)

Journal ref: BMC Public Health 15 (1280), 1-13 (2015)

The Arab Spring: A Simple Compartmental Model for the Dynamics of a Revolution

Authors: John Lang, Hans De Sterck

Abstract: The self-immolation of Mohamed Bouazizi on December 17, 2011 in the small Tunisian city of Sidi Bouzid, set off a sequence of events culminating in the revolutions of the Arab Spring. It is widely believed that the Internet and social media played a critical role in the growth and success of protests that led to the downfall of the regimes in Egypt and Tunisia. However, the precise mechanisms by w… ▽ More The self-immolation of Mohamed Bouazizi on December 17, 2011 in the small Tunisian city of Sidi Bouzid, set off a sequence of events culminating in the revolutions of the Arab Spring. It is widely believed that the Internet and social media played a critical role in the growth and success of protests that led to the downfall of the regimes in Egypt and Tunisia. However, the precise mechanisms by which these new media affected the course of events remain unclear. We introduce a simple compartmental model for the dynamics of a revolution in a dictatorial regime such as Tunisia or Egypt which takes into account the role of the Internet and social media. An elementary mathematical analysis of the model identifies four main parameter regions: stable police state, meta-stable police state, unstable police state, and failed state. We illustrate how these regions capture, at least qualitatively, a wide range of scenarios observed in the context of revolutionary movements by considering the revolutions in Tunisia and Egypt, as well as the situation in Iran, China, and Somalia, as case studies. We pose four questions about the dynamics of the Arab Spring revolutions and formulate answers informed by the model. We conclude with some possible directions for future work. △ Less

Submitted 5 October, 2012; originally announced October 2012.

Empirical Comparison of Algorithms for Network Community Detection

Authors: Jure Leskovec, Kevin J. Lang, Michael W. Mahoney

Abstract: Detecting clusters or communities in large real-world graphs such as large social or information networks is a problem of considerable interest. In practice, one typically chooses an objective function that captures the intuition of a network cluster as set of nodes with better internal connectivity than external connectivity, and then one applies approximation algorithms or heuristics to extract… ▽ More Detecting clusters or communities in large real-world graphs such as large social or information networks is a problem of considerable interest. In practice, one typically chooses an objective function that captures the intuition of a network cluster as set of nodes with better internal connectivity than external connectivity, and then one applies approximation algorithms or heuristics to extract sets of nodes that are related to the objective function and that "look like" good communities for the application of interest. In this paper, we explore a range of network community detection methods in order to compare them and to understand their relative performance and the systematic biases in the clusters they identify. We evaluate several common objective functions that are used to formalize the notion of a network community, and we examine several different classes of approximation algorithms that aim to optimize such objective functions. In addition, rather than simply fixing an objective and asking for an approximation to the best cluster of any size, we consider a size-resolved version of the optimization problem. Considering community quality as a function of its size provides a much finer lens with which to examine community detection algorithms, since objective functions and approximation algorithms often have non-obvious size-dependent behavior. △ Less

Submitted 20 April, 2010; originally announced April 2010.

ACM Class: H.5.8

Journal ref: WWW 2010: ACM WWW International Conference on World Wide Web, 2010

Plans for PANDA Online Computing

Authors: Jens Soeren Lange, Dapeng **, Daniel Kirschner, Andreas Kopp, Wolfgang Kuehn, Johannes Lang, Lu Li, Ming Liu, ZhenAn Liu, David Muenchow, Tiago Perez, Johannes Roskoss, Qiang Wang, Hao Xu, Shuo Yang

Abstract: The PANDA experiment will not use any hardware trigger, i.e. all raw data are streaming in the data acquisition with a bandwidth of ~280 GB/s. The PANDA Online System is designed to perform data reduction by a factor of ~800 by reconstruction algorithms programmed in VHDL (Very High Speed Integrated Circuit Hardware Description Language) on FPGAs (Field Programmable Gate Arrays). The PANDA experiment will not use any hardware trigger, i.e. all raw data are streaming in the data acquisition with a bandwidth of ~280 GB/s. The PANDA Online System is designed to perform data reduction by a factor of ~800 by reconstruction algorithms programmed in VHDL (Very High Speed Integrated Circuit Hardware Description Language) on FPGAs (Field Programmable Gate Arrays). △ Less

Submitted 16 October, 2009; v1 submitted 9 October, 2009; originally announced October 2009.

Comments: presented at Workshop on Fast Cerenkov Detectors, May 11-13, 2009, Giessen, Germany, 9 pages, 3 figures, accepted for publication in JINST

Journal ref: JINST 4:P11001,2009

Adaptive Finite Element Simulation of the Time-dependent Simplified PN Equations

Authors: Martin Frank, Jens Lang, Matthias Schaefer

Abstract: The steady-state simplified $P_N$ approximation to the radiative transport equation has been successfully applied to many problems involving radiation. Recently, time-dependent simplified $P_N$ equations have been derived by an asymptotic analysis similar to the asymptotic derivation of the steady-state $SP_N$ equations \cite{FraKlaLarYas07}. In this paper, we present computational results for t… ▽ More The steady-state simplified $P_N$ approximation to the radiative transport equation has been successfully applied to many problems involving radiation. Recently, time-dependent simplified $P_N$ equations have been derived by an asymptotic analysis similar to the asymptotic derivation of the steady-state $SP_N$ equations \cite{FraKlaLarYas07}. In this paper, we present computational results for the time-dependent $SP_N$ equations in two dimensions, obtained by using an adaptive finite element approach. Several numerical comparisons with other existing models are shown. △ Less

Submitted 3 February, 2009; originally announced February 2009.

Comments: 18 pages, 5 figures

Journal ref: J. Sci. Comput. 49 332-350 (2011)

Community Structure in Large Networks: Natural Cluster Sizes and the Absence of Large Well-Defined Clusters

Authors: Jure Leskovec, Kevin J. Lang, Anirban Dasgupta, Michael W. Mahoney

Abstract: A large body of work has been devoted to defining and identifying clusters or communities in social and information networks. We explore from a novel perspective several questions related to identifying meaningful communities in large social and information networks, and we come to several striking conclusions. We employ approximation algorithms for the graph partitioning problem to characterize… ▽ More A large body of work has been devoted to defining and identifying clusters or communities in social and information networks. We explore from a novel perspective several questions related to identifying meaningful communities in large social and information networks, and we come to several striking conclusions. We employ approximation algorithms for the graph partitioning problem to characterize as a function of size the statistical and structural properties of partitions of graphs that could plausibly be interpreted as communities. In particular, we define the network community profile plot, which characterizes the "best" possible community--according to the conductance measure--over a wide range of size scales. We study over 100 large real-world social and information networks. Our results suggest a significantly more refined picture of community structure in large networks than has been appreciated previously. In particular, we observe tight communities that are barely connected to the rest of the network at very small size scales; and communities of larger size scales gradually "blend into" the expander-like core of the network and thus become less "community-like." This behavior is not explained, even at a qualitative level, by any of the commonly-used network generation models. Moreover, it is exactly the opposite of what one would expect based on intuition from expander graphs, low-dimensional or manifold-like graphs, and from small social networks that have served as testbeds of community detection algorithms. We have found that a generative graph model, in which new edges are added via an iterative "forest fire" burning process, is able to produce graphs exhibiting a network community profile plot similar to what we observe in our network datasets. △ Less

Submitted 8 October, 2008; originally announced October 2008.

Comments: 66 pages, a much expanded version of our WWW 2008 paper