-
Shower Separation in Five Dimensions for Highly Granular Calorimeters using Machine Learning
Authors:
S. Lai,
J. Utehs,
A. Wilhahn,
M. C. Fouz,
O. Bach,
E. Brianne,
A. Ebrahimi,
K. Gadow,
P. Göttlicher,
O. Hartbrich,
D. Heuchel,
A. Irles,
K. Krüger,
J. Kvasnicka,
S. Lu,
C. Neubüser,
A. Provenza,
M. Reinecke,
F. Sefkow,
S. Schuwalow,
M. De Silva,
Y. Sudo,
H. L. Tran,
L. Liu,
R. Masuda
, et al. (26 additional authors not shown)
Abstract:
To achieve state-of-the-art jet energy resolution for Particle Flow, sophisticated energy clustering algorithms must be developed that can fully exploit available information to separate energy deposits from charged and neutral particles. Three published neural network-based shower separation models were applied to simulation and experimental data to measure the performance of the highly granular…
▽ More
To achieve state-of-the-art jet energy resolution for Particle Flow, sophisticated energy clustering algorithms must be developed that can fully exploit available information to separate energy deposits from charged and neutral particles. Three published neural network-based shower separation models were applied to simulation and experimental data to measure the performance of the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL) technological prototype in distinguishing the energy deposited by a single charged and single neutral hadron for Particle Flow. The performance of models trained using only standard spatial and energy and charged track position information from an event was compared to models trained using timing information available from AHCAL, which is expected to improve sensitivity to shower development and, therefore, aid in clustering. Both simulation and experimental data were used to train and test the models and their performances were compared. The best-performing neural network achieved significantly superior event reconstruction when timing information was utilised in training for the case where the charged hadron had more energy than the neutral one, motivating temporally sensitive calorimeters. All models under test were observed to tend to allocate energy deposited by the more energetic of the two showers to the less energetic one. Similar shower reconstruction performance was observed for a model trained on simulation and applied to data and a model trained and applied to data.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
Superionic surface Li-ion transport in carbonaceous materials
Authors:
Jianbin Zhou,
Shen Wang,
Chaoshan Wu,
Ji Qi,
Hongli Wan,
Shen Lai,
Shijie Feng,
Tsz Wai Ko,
Zhaohui Liang,
Ke Zhou,
Nimrod Harpak,
Nick Solan,
Mengchen Liu,
Zeyu Hui,
Paulina J. Ai,
Kent Griffith,
Chunsheng Wang,
Shyue ** Ong,
Yan Yao,
** Liu
Abstract:
Unlike Li-ion transport in the bulk of carbonaceous materials, little is known about Li-ion diffusion on their surface. In this study, we have discovered an ultra-fast Li-ion transport phenomenon on the surface of carbonaceous materials, particularly when they have limited Li insertion capacity along with a high surface area. This is exemplified by a carbon black, Ketjen Black (KB). An ionic condu…
▽ More
Unlike Li-ion transport in the bulk of carbonaceous materials, little is known about Li-ion diffusion on their surface. In this study, we have discovered an ultra-fast Li-ion transport phenomenon on the surface of carbonaceous materials, particularly when they have limited Li insertion capacity along with a high surface area. This is exemplified by a carbon black, Ketjen Black (KB). An ionic conductivity of 18.1 mS cm-1 at room temperature is observed, far exceeding most solid-state ion conductors. Theoretical calculations reveal a low diffusion barrier for the surface Li species. The species is also identified as Li*, which features a partial positive charge. As a result, lithiated KB functions effectively as an interlayer between Li and solid-state electrolytes (SSE) to mitigate dendrite growth and cell shorting. This function is found to be electrolyte agnostic, effective for both sulfide and halide SSEs. Further, lithiated KB can act as a high-performance mixed ion/electron conductor that is thermodynamically stable at potentials near Li metal. A graphite anode mixed with KB instead of a solid electrolyte demonstrates full utilization with a capacity retention of ~85% over 300 cycles. The discovery of this surface-mediated ultra-fast Li-ion transport mechanism provides new directions for the design of solid-state ion conductors and solid-state batteries.
△ Less
Submitted 27 May, 2024;
originally announced May 2024.
-
Software Compensation for Highly Granular Calorimeters using Machine Learning
Authors:
S. Lai,
J. Utehs,
A. Wilhahn,
O. Bach,
E. Brianne,
A. Ebrahimi,
K. Gadow,
P. Göttlicher,
O. Hartbrich,
D. Heuchel,
A. Irles,
K. Krüger,
J. Kvasnicka,
S. Lu,
C. Neubüser,
A. Provenza,
M. Reinecke,
F. Sefkow,
S. Schuwalow,
M. De Silva,
Y. Sudo,
H. L. Tran,
E. Buhmann,
E. Garutti,
S. Huck
, et al. (39 additional authors not shown)
Abstract:
A neural network for software compensation was developed for the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL). The neural network uses spatial and temporal event information from the AHCAL and energy information, which is expected to improve sensitivity to shower development and the neutron fraction of the hadron shower. The neural network method produced a depth-dependent energy w…
▽ More
A neural network for software compensation was developed for the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL). The neural network uses spatial and temporal event information from the AHCAL and energy information, which is expected to improve sensitivity to shower development and the neutron fraction of the hadron shower. The neural network method produced a depth-dependent energy weighting and a time-dependent threshold for enhancing energy deposits consistent with the timescale of evaporation neutrons. Additionally, it was observed to learn an energy-weighting indicative of longitudinal leakage correction. In addition, the method produced a linear detector response and outperformed a published control method regarding resolution for every particle energy studied.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
An Artificial Intelligence (AI) workflow for catalyst design and optimization
Authors:
Nung Siong Lai,
Yi Shen Tew,
Xialin Zhong,
Jun Yin,
Jiali Li,
Binhang Yan,
Xiaonan Wang
Abstract:
In the pursuit of novel catalyst development to address pressing environmental concerns and energy demand, conventional design and optimization methods often fall short due to the complexity and vastness of the catalyst parameter space. The advent of Machine Learning (ML) has ushered in a new era in the field of catalyst optimization, offering potential solutions to the shortcomings of traditional…
▽ More
In the pursuit of novel catalyst development to address pressing environmental concerns and energy demand, conventional design and optimization methods often fall short due to the complexity and vastness of the catalyst parameter space. The advent of Machine Learning (ML) has ushered in a new era in the field of catalyst optimization, offering potential solutions to the shortcomings of traditional techniques. However, existing methods fail to effectively harness the wealth of information contained within the burgeoning body of scientific literature on catalyst synthesis. To address this gap, this study proposes an innovative Artificial Intelligence (AI) workflow that integrates Large Language Models (LLMs), Bayesian optimization, and an active learning loop to expedite and enhance catalyst optimization. Our methodology combines advanced language understanding with robust optimization strategies, effectively translating knowledge extracted from diverse literature into actionable parameters for practical experimentation and optimization. In this article, we demonstrate the application of this AI workflow in the optimization of catalyst synthesis for ammonia production. The results underscore the workflow's ability to streamline the catalyst development process, offering a swift, resource-efficient, and high-precision alternative to conventional methods.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
ATHENA Detector Proposal -- A Totally Hermetic Electron Nucleus Apparatus proposed for IP6 at the Electron-Ion Collider
Authors:
ATHENA Collaboration,
J. Adam,
L. Adamczyk,
N. Agrawal,
C. Aidala,
W. Akers,
M. Alekseev,
M. M. Allen,
F. Ameli,
A. Angerami,
P. Antonioli,
N. J. Apadula,
A. Aprahamian,
W. Armstrong,
M. Arratia,
J. R. Arrington,
A. Asaturyan,
E. C. Aschenauer,
K. Augsten,
S. Aune,
K. Bailey,
C. Baldanza,
M. Bansal,
F. Barbosa,
L. Barion
, et al. (415 additional authors not shown)
Abstract:
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its e…
▽ More
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges.
△ Less
Submitted 13 October, 2022;
originally announced October 2022.
-
First Results from the Taiwan Axion Search Experiment with Haloscope at 19.6 $μ$eV
Authors:
Hsin Chang,
**g-Yang Chang,
Yi-Chieh Chang,
Yu-Han Chang,
Yuan-Hann Chang,
Chien-Han Chen,
Ching-Fang Chen,
Kuan-Yu Chen,
Yung-Fu Chen,
Wei-Yuan Chiang,
Wei-Chen Chien,
Hien Thi Doan,
Wei-Cheng Hung,
Watson Kuo,
Shou-Bai Lai,
Han-Wen Liu,
Min-Wei OuYang,
**-I Wu,
Shin-Shan Yu
Abstract:
This Letter reports on the first results from the Taiwan Axion Search Experiment with Haloscope, a search for axions using a microwave cavity at frequencies between 4.70750 and 4.79815 GHz. Apart from the non-axion signals, no candidates with a significance more than 3.355 were found. The experiment excludes models with the axion-two-photon coupling…
▽ More
This Letter reports on the first results from the Taiwan Axion Search Experiment with Haloscope, a search for axions using a microwave cavity at frequencies between 4.70750 and 4.79815 GHz. Apart from the non-axion signals, no candidates with a significance more than 3.355 were found. The experiment excludes models with the axion-two-photon coupling $\left|g_{aγγ}\right|\gtrsim 8.2\times 10^{-14}$ GeV$^{-1}$, a factor of eleven above the benchmark KSVZ model, reaching a sensitivity three orders of magnitude better than any existing limits in the mass range 19.4687 < $m_a$ < 19.8436 $μ$eV. It is also the first time that a haloscope-type experiment places constraints on $g_{aγγ}$ in this mass region.
△ Less
Submitted 19 May, 2022; v1 submitted 11 May, 2022;
originally announced May 2022.
-
Taiwan Axion Search Experiment with Haloscope: Designs and operations
Authors:
Hsin Chang,
**g-Yang Chang,
Yi-Chieh Chang,
Yu-Han Chang,
Yuan-Hann Chang,
Chien-Han Chen,
Ching-Fang Chen,
Kuan-Yu Chen,
Yung-Fu Chen,
Wei-Yuan Chiang,
Wei-Chen Chien,
Hien Thi Doan,
Wei-Cheng Hung,
Watson Kuo,
Shou-Bai Lai,
Han-Wen Liu,
Min-Wei OuYang,
**-I Wu,
Shin-Shan Yu
Abstract:
We report on a holoscope axion search experiment near $19.6\ {\rm μeV}$ from the TASEH collaboration. The experiment is carried out via a frequency-tunable cavity detector with a volume $V = 0.234\ {\rm liter}$ in a magnetic field $B_0 = 8\ {\rm T}$. With a signal receiver that has a system noise temperature $T_{\rm sys} \cong 2.2\ {\rm K}$ and experiment time about 1 month, the search excludes va…
▽ More
We report on a holoscope axion search experiment near $19.6\ {\rm μeV}$ from the TASEH collaboration. The experiment is carried out via a frequency-tunable cavity detector with a volume $V = 0.234\ {\rm liter}$ in a magnetic field $B_0 = 8\ {\rm T}$. With a signal receiver that has a system noise temperature $T_{\rm sys} \cong 2.2\ {\rm K}$ and experiment time about 1 month, the search excludes values of the axion-photon coupling constant $g_{\rm aγγ} \gtrsim 8.1 \times 10^{-14} \ {\rm GeV}^{-1}$, a factor of 11 above the KSVZ model, at the 95\% confidence level in the mass range of $19.4687-19.8436\ {\rm μeV}$. We present the experimental setup and procedures to accomplish this search.
△ Less
Submitted 1 September, 2022; v1 submitted 3 May, 2022;
originally announced May 2022.
-
Taiwan Axion Search Experiment with Haloscope: CD102 Analysis Details
Authors:
Hsin Chang,
**g-Yang Chang,
Yi-Chieh Chang,
Yu-Han Chang,
Yuan-Hann Chang,
Chien-Han Chen,
Ching-Fang Chen,
Kuan-Yu Chen,
Yung-Fu Chen,
Wei-Yuan Chiang,
Wei-Chen Chien,
Hien Thi Doan,
Wei-Cheng Hung,
Watson Kuo,
Shou-Bai Lai,
Han-Wen Liu,
Min-Wei OuYang,
**-I Wu,
Shin-Shan Yu
Abstract:
This paper presents the analysis of the data acquired during the first physics run of the Taiwan Axion Search Experiment with Haloscope (TASEH), a search for axions using a microwave cavity at frequencies between 4.70750 and 4.79815 GHz. The data were collected from October 13, 2021 to November 15, 2021, and are referred to as the CD102 data. The analysis of the TASEH CD102 data excludes models wi…
▽ More
This paper presents the analysis of the data acquired during the first physics run of the Taiwan Axion Search Experiment with Haloscope (TASEH), a search for axions using a microwave cavity at frequencies between 4.70750 and 4.79815 GHz. The data were collected from October 13, 2021 to November 15, 2021, and are referred to as the CD102 data. The analysis of the TASEH CD102 data excludes models with the axion-two-photon coupling $|g_{aγγ}| \gtrsim 8.2\times 10^{-14}$ GeV$^{-1}$, a factor of eleven above the benchmark KSVZ model for the mass range 19.4687 < ma < 19.8436 $μ$eV.
△ Less
Submitted 13 May, 2022; v1 submitted 29 April, 2022;
originally announced April 2022.
-
Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report
Authors:
R. Abdul Khalek,
A. Accardi,
J. Adam,
D. Adamiak,
W. Akers,
M. Albaladejo,
A. Al-bataineh,
M. G. Alexeev,
F. Ameli,
P. Antonioli,
N. Armesto,
W. R. Armstrong,
M. Arratia,
J. Arrington,
A. Asaturyan,
M. Asai,
E. C. Aschenauer,
S. Aune,
H. Avagyan,
C. Ayerbe Gayoso,
B. Azmoun,
A. Bacchetta,
M. D. Baker,
F. Barbosa,
L. Barion
, et al. (390 additional authors not shown)
Abstract:
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon…
▽ More
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and develo** detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions.
This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter
△ Less
Submitted 26 October, 2021; v1 submitted 8 March, 2021;
originally announced March 2021.
-
Room-temperature bipolar valleytronic transistor in MoS2/WSe2 heterostructures
Authors:
Chongyun Jiang,
Abdullah Rasmita,
Hui Ma,
Qinghai Tan,
Zumeng Huang,
Shen Lai,
Sheng Liu,
Xue Liu,
Qihua Xiong,
Wei-bo Gao
Abstract:
Valley degree of freedom in the 2D semiconductor is a promising platform for the next generation optoelectronics. Electrons in different valleys can have opposite Berry curvature, leading to the valley Hall effect (VHE). However, VHE without the plasmonic structure's assistance has only been reported in cryogenic temperature, limiting its practical application. Here, we report the observation of V…
▽ More
Valley degree of freedom in the 2D semiconductor is a promising platform for the next generation optoelectronics. Electrons in different valleys can have opposite Berry curvature, leading to the valley Hall effect (VHE). However, VHE without the plasmonic structure's assistance has only been reported in cryogenic temperature, limiting its practical application. Here, we report the observation of VHE at room temperature in the MoS2/WSe2 heterostructures. We also uncover that both the magnitude and the polarity of the VHE in the 2D heterostructure is gate tunable. We attribute this to the opposite VHE contribution from the electron and hole in different layers. These results indicate the bipolar transport nature of our valleytronic transistor. Utilizing this gate tunability, we demonstrate a bipolar valleytronic transistor. Our results can be used to improve the ON/OFF ratio of the valleytronic transistor and to realize more versatile valleytronics logic circuits.
△ Less
Submitted 7 February, 2021;
originally announced February 2021.
-
Using detrended deconvolution foreign exchange network to identify currency status
Authors:
Pengfei Xi,
Shiyang Lai,
Xueying Wang,
Weiqiang Huang
Abstract:
This article proposed a hybrid detrended deconvolution foreign exchange network construction method (DDFEN), which combined the detrended cross-correlation analysis coefficient (DCCC) and the network deconvolution method together. DDFEN is designed to reveal the `true' correlation of currencies by filtering indirect effects in the foreign exchange networks (FXNs). The empirical results show that D…
▽ More
This article proposed a hybrid detrended deconvolution foreign exchange network construction method (DDFEN), which combined the detrended cross-correlation analysis coefficient (DCCC) and the network deconvolution method together. DDFEN is designed to reveal the `true' correlation of currencies by filtering indirect effects in the foreign exchange networks (FXNs). The empirical results show that DDFEN can reflect the change of currency status in the long term and also perform more stable than traditional network construction methods.
△ Less
Submitted 8 August, 2020;
originally announced August 2020.
-
Inferring incubation period distribution of COVID-19 based on SEAIR Model
Authors:
Shiyang Lai,
Tianqi Zhao,
Ningyuan Fan
Abstract:
To reduce the biases of traditional survey-based methods, this paper proposes an epidemic model-based approach to inference the incubation period distribution of COVID-19 utilizing the publicly reported confirmed case number. We construct an epidemic model, namely SEAIR, and take advantage of the dynamic transmission process depicted by SEAIR to estimate the onset probability in each day of expose…
▽ More
To reduce the biases of traditional survey-based methods, this paper proposes an epidemic model-based approach to inference the incubation period distribution of COVID-19 utilizing the publicly reported confirmed case number. We construct an epidemic model, namely SEAIR, and take advantage of the dynamic transmission process depicted by SEAIR to estimate the onset probability in each day of exposed individuals in eight impacted countries. Based on these estimations, the general incubation probability distribution of COVID-19 has been revealed. The proposed method can avoid several biases of traditional survey-based methods. However, due to the mathematical-model-based nature of this method, the inference results are somewhat sensitive to the setting of parameters. Therefore, this method should be practiced reasonably on the basis of a certain understanding of the studied epidemic.
△ Less
Submitted 21 July, 2020;
originally announced July 2020.
-
An immersed boundary method for fluid--structure--acoustics interactions involving large deformations and complex geometries
Authors:
Li Wang,
Fang-Bao Tian,
Joseph C. S. Lai
Abstract:
This paper presents an immersed boundary (IB) method for fluid--structure--acoustics interactions involving large deformations and complex geometries. In this method, the fluid dynamics is solved by a finite difference method where the temporal, viscous and convective terms are respectively discretized by the third-order Runge-Kutta scheme, the fourth-order central difference scheme and a fifth-or…
▽ More
This paper presents an immersed boundary (IB) method for fluid--structure--acoustics interactions involving large deformations and complex geometries. In this method, the fluid dynamics is solved by a finite difference method where the temporal, viscous and convective terms are respectively discretized by the third-order Runge-Kutta scheme, the fourth-order central difference scheme and a fifth-order W/TENO (Weighted/Targeted Essentially Non-oscillation) scheme. Without loss of generality, a nonlinear flexible plate is considered here, and is solved by a finite element method based on the absolute nodal coordinate formulation. The no-slip boundary condition at the fluid--structure interface is achieved by using a diffusion-interface penalty IB method. With the above proposed method, the aeroacoustics field generated by the moving boundaries and the associated flows are inherently solved. In order to validate and verify the current method, several benchmark cases are conducted: acoustic waves scattered from a stationary cylinder in a quiescent flow, sound generation by a stationary and a rotating cylinder in a uniform flow, sound generation by an insect in hovering flight, deformation of a red blood cell induced by acoustic waves and acoustic waves scattered by a stationary sphere. The comparison of the sound scattered by a cylinder shows that the present IB--WENO scheme, a simple approach, has an excellent performance which is even better than the implicit IB--lattice Boltzmann method. For the sound scattered by a sphere, the IB--TENO scheme has a lower dissipation compared with the IB--WENO scheme. Applications of this technique to model fluid-structure-acoustics interactions of flap** foils mimicking an insect wing section during forward flight and flap** foil energy harvester are also presented, considering the effects of foil shape and flexibility.
△ Less
Submitted 1 May, 2019;
originally announced May 2019.
-
Spacecraft charging: incoming and outgoing electrons
Authors:
Shu T. Lai
Abstract:
This paper presents an overview of the roles played by incoming and outgoing electrons in spacecraft surface and stresses the importance of surface conditions for spacecraft charging. The balance between the incoming electron current from the ambient plasma and the outgoing currents of secondary electrons, backscattered electrons, and photoelectrons from the surfaces determines the surface potenti…
▽ More
This paper presents an overview of the roles played by incoming and outgoing electrons in spacecraft surface and stresses the importance of surface conditions for spacecraft charging. The balance between the incoming electron current from the ambient plasma and the outgoing currents of secondary electrons, backscattered electrons, and photoelectrons from the surfaces determines the surface potential. Since surface conditions significantly affect the outgoing currents, the critical temperature and the surface potential are also significantly affected. As a corollary, high level differential charging of adjacent surfaces with very different surface conditions is a space hazard.
△ Less
Submitted 18 September, 2013;
originally announced September 2013.
-
Pinned modes in lossy lattices with local gain and nonlinearity
Authors:
Boris A. Malomed,
Edwin Ding,
K. W. Chow,
S. K. Lai
Abstract:
We introduce a discrete linear lossy system with an embedded "hot spot" (HS), i.e., a site carrying linear gain and complex cubic nonlinearity. The system can be used to model an array of optical or plasmonic waveguides, where selective excitation of particular cores is possible. Localized modes pinned to the HS are constructed in an implicit analytical form, and their stability is investigated nu…
▽ More
We introduce a discrete linear lossy system with an embedded "hot spot" (HS), i.e., a site carrying linear gain and complex cubic nonlinearity. The system can be used to model an array of optical or plasmonic waveguides, where selective excitation of particular cores is possible. Localized modes pinned to the HS are constructed in an implicit analytical form, and their stability is investigated numerically. Stability regions for the modes are obtained in the parameter space of the linear gain and cubic gain/loss. An essential result is that the interaction of the unsaturated cubic gain and self-defocusing nonlinearity can produce stable modes, although they may be destabilized by finite amplitude perturbations. On the other hand, the interplay of the cubic loss and self-defocusing gives rise to a bistability.
△ Less
Submitted 14 September, 2012;
originally announced September 2012.
-
Bipolaron Model of Superconductivity in Chalcogenide Glasses
Authors:
Liang-You Zheng,
Bo-Cheng Wang,
Shan T. Lai
Abstract:
In this paper we propose a small bipolaron model for the superconductivity in the Chalcogenide glasses (c-As2Te3 and c-GeTe). The results are agree with the experiments.
In this paper we propose a small bipolaron model for the superconductivity in the Chalcogenide glasses (c-As2Te3 and c-GeTe). The results are agree with the experiments.
△ Less
Submitted 25 October, 2010;
originally announced October 2010.
-
Bipolaron Model of the Superconductivity of an Iron-Based Layered Compound LnO_{1-x}F_xFePn (Ln =La, Sm, Nd, Pr, Ce, Pn=P, As)
Authors:
Liang-You Zheng,
Bo-Cheng Wang,
Shan T. Lai
Abstract:
A bipolaron model is proposed as a superconductivity mechanism for iron-based superconductivity. The results are consistent with the experiments.
A bipolaron model is proposed as a superconductivity mechanism for iron-based superconductivity. The results are consistent with the experiments.
△ Less
Submitted 14 October, 2010;
originally announced October 2010.
-
Tracing Turbulent Ambipolar Diffusion in Molecular Clouds
Authors:
Hua-bai Li,
Martin Houde,
Shih-** Lai,
T. K. Sridharan
Abstract:
Though flux freezing is a good approximation frequently assumed for molecular clouds, ambipolar diffusion (AD) is inevitable at certain scales. The scale at which AD sets in can be a crucial parameter for turbulence and the star formation process. However, both observation and simulation of AD are very challenging and our knowledge of it is very limited. We proposed earlier (Li and Houde 2008) tha…
▽ More
Though flux freezing is a good approximation frequently assumed for molecular clouds, ambipolar diffusion (AD) is inevitable at certain scales. The scale at which AD sets in can be a crucial parameter for turbulence and the star formation process. However, both observation and simulation of AD are very challenging and our knowledge of it is very limited. We proposed earlier (Li and Houde 2008) that the difference between ion and neutral velocity spectra is a signature of turbulent AD and can be used to estimate the AD scales and magnetic field strength. Here we present observational evidence showing that this difference between the velocity dispersions from coexistent ions and neutrals is indeed correlated with magnetic field strength.
△ Less
Submitted 7 July, 2010; v1 submitted 15 March, 2010;
originally announced March 2010.
-
High power radially polarized light generated from photonic crystal segmented half-wave-plate
Authors:
P. B. Phua,
W. J. Lai,
Y. L. Lim,
B. S. Tan,
R. F. Wu,
K. S. Lai,
H. W. Tan
Abstract:
We have generated more than 100 watts of radial polarized beam from a Yb fiber laser using a photonics crystal segmented half-wave-plate. We demonstrated the high power handling capability of such a photonics crystal segmented half-wave-plate and show that it is a promising external radial polarization converter for high power Yb fiber laser used in laser cutting industry.
We have generated more than 100 watts of radial polarized beam from a Yb fiber laser using a photonics crystal segmented half-wave-plate. We demonstrated the high power handling capability of such a photonics crystal segmented half-wave-plate and show that it is a promising external radial polarization converter for high power Yb fiber laser used in laser cutting industry.
△ Less
Submitted 25 October, 2007;
originally announced October 2007.