-
In-situ coating of silicon-rich films on tokamak plasma-facing components with real-time Si material injection
Authors:
Florian Effenberg,
Shota Abe,
Gregory Sinclair,
Tyler Abrams,
Alessandro Bortolon,
William R. Wampler,
Florian M. Laggner,
Dmitry L. Rudakov,
Igor Bykov,
Charles J. Lasnier,
David Mauzey,
Alexander Nagy,
Raffi Nazikian,
Filippo Scotti,
Huiqian Wang,
Robert S. Wilcox,
the DIII-D Team
Abstract:
Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities…
▽ More
Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities ranging from $3.9-7.5\times10^{19}$ m$^{-3}$ and input powers ranging from $5.5-9$ MW. The small Si pellets were delivered with the impurity granule injector (IGI) at frequencies ranging from 4-16 Hz corresponding to mass flow rates of $5-19$ mg/s ($1-4.2\times10^{20}$ Si/s) at cumulative amounts of up to 34 mg of Si per five-second discharge. Graphite samples were exposed to the scrape-off layer and private flux region plasmas through the divertor material evaluation system (DiMES) to evaluate the Si deposition on the divertor targets. The Si II emission at the sample correlates with silicon injection and suggests net surface Si-deposition in measurable amounts. Post-mortem analysis showed Si-rich coatings containing silicon oxides, of which SiO$_2$ is the dominant component. No evidence of SiC was found, which is attributed to low divertor surface temperatures. The in-situ and ex-situ analysis found that Si-rich coatings of at least $0.4-1.2$ nm thickness have been deposited at $0.4-0.7$ nm/s. The technique is estimated to coat a surface area of at least 0.94 m$^2$ on the outer divertor. These results demonstrate the potential of using real-time material injection to form Si-enriched layers on divertor PFCs during reactor operation.
△ Less
Submitted 9 August, 2023; v1 submitted 8 April, 2023;
originally announced April 2023.
-
Mitigation of plasma-wall interactions with low-Z powders in DIII-D high confinement plasmas
Authors:
Florian Effenberg,
Alessandro Bortolon,
Livia Casali,
Raffi Nazikian,
Igor Bykov,
Filippo Scotti,
Huiqian Q. Wang,
Max E. Fenstermacher,
Robert Lunsford,
Alexander Nagy,
Brian A. Grierson,
Florian M. Laggner,
Rajesh Maingi,
the DIII-D Team
Abstract:
Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-a…
▽ More
Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-angle slot (SAS) divertor for 2-s intervals at constant rates of 3-204 mg/s. The multi-species BN powders at a rate of 54 mg/s showed the most substantial increase in divertor neutral compression by more than an order of magnitude and lasting detachment with minor degradation of the stored magnetic energy $W_{mhd}$ by 5%. Rates of 204 mg/s of boron nitride powder further reduce ELM-fluxes on the divertor but also cause a drop in confinement performance by 24% due to the onset of an $n=2$ tearing mode. The application of powders also showed a substantial improvement of wall conditions manifesting in reduced wall fueling source and intrinsic carbon and oxygen content in response to the cumulative injection of non-recycling materials. The results suggest that low-Z powder injection, including mixed element compounds, is a promising new core-edge compatible technique that simultaneously enables divertor detachment and improves wall conditions during high confinement operation.
△ Less
Submitted 16 August, 2022; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Perturbative Determination of Plasma Microinstabilities in Tokamaks
Authors:
A. O. Nelson,
F. M. Laggner,
A. Diallo,
Z. A. Xing,
D. R. Smith,
E. Kolemen
Abstract:
Recently, theoretical analysis has identified plasma microinstabilities as the primary mechanism responsible for anomalous heat transport in tokamaks. In particular, the microtearing mode (MTM) has been credited with the production of intense electron heat fluxes, most notably through a thin self-organized boundary layer called the pedestal. Here we exploit a novel, time-dependent analysis to comp…
▽ More
Recently, theoretical analysis has identified plasma microinstabilities as the primary mechanism responsible for anomalous heat transport in tokamaks. In particular, the microtearing mode (MTM) has been credited with the production of intense electron heat fluxes, most notably through a thin self-organized boundary layer called the pedestal. Here we exploit a novel, time-dependent analysis to compile explicit experimental evidence that MTMs are active in the pedestal region. The expected frequency of pedestal MTMs, calculated as a function of time from plasma profile measurements, is shown in a dedicated experiment to be in excellent agreement with observed magnetic turbulence fluctuations. Further, fast perturbations of the plasma equilibrium are introduced to decouple the instability drive and resonant location, providing a compelling validation of the analytical model. This analysis offers strong evidence of edge MTMs, validating the existing theoretical work and highlighting the important role of MTMs in regulating electron heat flow in tokamaks.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Initial operation and data processing on a system for real-time evaluation of Thomson scattering signals on the Large Helical Device
Authors:
K. C. Hammond,
F. M. Laggner,
A. Diallo,
S. Doskoczynski,
C. Freeman,
H. Funaba,
D. A. Gates,
R. Rozenblat,
G. Tchilinguirian,
Z. Xing,
I. Yamada,
R. Yasuhara,
G. Zimmer,
E. Kolemen
Abstract:
A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four s…
▽ More
A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four spatial points at the laser repetition rate of 30 Hz, well within the system's rated capability for 60 Hz. We present examples of data collected from this initial run and describe subsequent adaptations to the analysis code to improve the fidelity of the temperature calculations.
△ Less
Submitted 23 June, 2021; v1 submitted 9 January, 2021;
originally announced January 2021.
-
Plasma response measurements of external magnetic perturbations using electron cyclotron emission and comparisons to 3D ideal MHD equilibrium
Authors:
M. Willensdorfer,
S. S. Denk,
E. Strumberger,
W. Suttrop,
B. Vanovac,
D. Brida,
M. Cavedon,
I. Classen,
M. Dunne,
S. Fietz,
R. Fischer,
A. Kirk,
F. M. Laggner,
Y. Q. Liu,
T. Odstrcil,
D. A. Ryan,
E. Viezzer,
H. Zohm,
I. C. Luhmann
Abstract:
The plasma response from an external n = 2 magnetic perturbation field in ASDEX Upgrade has been measured using mainly electron cyclotron emission (ECE) diagnostics and a rigid rotating field. To interpret ECE and ECE-imaging (ECE-I) measurements accurately, forward modeling of the radiation transport has been combined with ray tracing. The measured data is compared to synthetic ECE data generated…
▽ More
The plasma response from an external n = 2 magnetic perturbation field in ASDEX Upgrade has been measured using mainly electron cyclotron emission (ECE) diagnostics and a rigid rotating field. To interpret ECE and ECE-imaging (ECE-I) measurements accurately, forward modeling of the radiation transport has been combined with ray tracing. The measured data is compared to synthetic ECE data generated from a 3D ideal magnetohydrodynamics (MHD) equilibrium calculated by VMEC. The measured amplitudes of the helical displacement around the low field side midplane are in reasonable agreement with the one from the synthetic VMEC diagnostics. Both exceed the prediction from the vacuum field calculations and indicate the presence of a kink response at the edge, which amplifies the perturbation. VMEC and MARS-F have been used to calculate the properties of this kink mode. The poloidal mode structure of the magnetic perturbation of this kink mode at the edge peaks at poloidal mode numbers larger than the resonant components |m| > |nq|, whereas the poloidal mode structure of its displacement is almost resonant |m| ~ |nq|. This is expected from ideal MHD in the proximity of rational surfaces. The displacement measured by ECE-I confirms this resonant response.
△ Less
Submitted 4 August, 2016; v1 submitted 30 March, 2016;
originally announced March 2016.
