Showing 1–50 of 53 results for author: Kuo, C

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

A Beehive Haloscope for High-mass Axion Dark Matter

Authors: Matthew O. Withers, Chao-Lin Kuo

Abstract: We propose a new haloscope geometry that can arbitrarily increase the resonator volume for a given target axion mass. This geometry consists of closely packed, overlap** coaxial cavities operating as a single resonator. While the resonant frequency is still determined by the dimensions of the individual "cells," the strong interactions between the cells encourage the entire "beehive" to oscillat… ▽ More We propose a new haloscope geometry that can arbitrarily increase the resonator volume for a given target axion mass. This geometry consists of closely packed, overlap** coaxial cavities operating as a single resonator. While the resonant frequency is still determined by the dimensions of the individual "cells," the strong interactions between the cells encourage the entire "beehive" to oscillate in phase, a phenomenon expected of tightly coupled harmonic oscillators. This synchronization behavior allows the construction of a singly connected large-volume resonator at high frequency by simply increasing the number of the cells. Using direct numerical simulations, we verify the existence of a global eigenmode that has a high (40%) form factor in a 169-element beehive resonator. The resonant frequency of the eigenmode is tunable by moving the center rods laterally in unison. The form factor is very tolerant to dimensional deviations and misalignment, as a result of mode hybridization due to strong coupling. The beehive haloscope inherits many appealing properties from the conventional coaxial cavity: a high quality factor, compatibility with a solenoid magnet, ease of fabrication, tuning, and coupling. We argue that this geometry is an excellent candidate for high-mass axion searches covering the post-inflationary parameter space (>5 GHz). △ Less

Submitted 9 April, 2024; originally announced April 2024.

Comments: 21 pages, 26 figures

Treatment-wise Glioblastoma Survival Inference with Multi-parametric Preoperative MRI

Authors: Xiaofeng Liu, Nadya Shusharina, Helen A Shih, C. -C. Jay Kuo, Georges El Fakhri, Jonghye Woo

Abstract: In this work, we aim to predict the survival time (ST) of glioblastoma (GBM) patients undergoing different treatments based on preoperative magnetic resonance (MR) scans. The personalized and precise treatment planning can be achieved by comparing the ST of different treatments. It is well established that both the current status of the patient (as represented by the MR scans) and the choice of tr… ▽ More In this work, we aim to predict the survival time (ST) of glioblastoma (GBM) patients undergoing different treatments based on preoperative magnetic resonance (MR) scans. The personalized and precise treatment planning can be achieved by comparing the ST of different treatments. It is well established that both the current status of the patient (as represented by the MR scans) and the choice of treatment are the cause of ST. While previous related MR-based glioblastoma ST studies have focused only on the direct map** of MR scans to ST, they have not included the underlying causal relationship between treatments and ST. To address this limitation, we propose a treatment-conditioned regression model for glioblastoma ST that incorporates treatment information in addition to MR scans. Our approach allows us to effectively utilize the data from all of the treatments in a unified manner, rather than having to train separate models for each of the treatments. Furthermore, treatment can be effectively injected into each convolutional layer through the adaptive instance normalization we employ. We evaluate our framework on the BraTS20 ST prediction task. Three treatment options are considered: Gross Total Resection (GTR), Subtotal Resection (STR), and no resection. The evaluation results demonstrate the effectiveness of injecting the treatment for estimating GBM survival. △ Less

Submitted 10 February, 2024; originally announced February 2024.

Comments: SPIE Medical Imaging 2024: Computer-Aided Diagnosis

High-volume tunable resonator for axion searches above 7 GHz

Authors: Taj A. Dyson, Chelsea L. Bartram, Ashley Davidson, Jonah B. Ezekiel, Laura M. Futamura, Tongtian Liu, Chao-Lin Kuo

Abstract: We present results from the first experimental demonstration of a tunable thin-shell axion haloscope. This novel geometry decouples the overall volume of the cavity-based resonator from its resonant frequency, thereby evading the steep sensitivity degradation at high-frequencies. An aluminum $2.6$ L ($41$ $λ^3$) prototype which tunes from $7.1$ to $8.0$ GHz was fabricated and characterized at room… ▽ More We present results from the first experimental demonstration of a tunable thin-shell axion haloscope. This novel geometry decouples the overall volume of the cavity-based resonator from its resonant frequency, thereby evading the steep sensitivity degradation at high-frequencies. An aluminum $2.6$ L ($41$ $λ^3$) prototype which tunes from $7.1$ to $8.0$ GHz was fabricated and characterized at room temperature. An axion-sensitive, straightforwardly tunable $\mathrm{TM}$$_{010}$ mode is clearly identified with a room temperature quality factor, $Q$, of $\sim$$5,000$. The on-resonance $E$-field distribution is mapped and found to agree with numerical calculations. Anticipating future cryogenic operation, we develop an alignment protocol relying only on rf measurements of the cavity, maintaining a form factor of $0.57$ across the full tuning range. These measurements demonstrate the feasibility of cavity-based haloscopes with operating volume $V\ggλ^3$. We discuss plans for future development and the parameters required for a thin-shell haloscope exploring the post-inflationary axion parameter space ($\sim$$4$ to $\sim$$30$ GHz) at DFSZ sensitivity. △ Less

Submitted 23 April, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Comments: 6 pages, 7 figures; references added, Table 2 updated, acknowledgments made more descriptive, grammar copy edits, and title updated to published version

Journal ref: PhysRevApplied 21 (2024) L041002

Results and Limits of Time Division Multiplexing for the BICEP Array High Frequency Receivers

Authors: S. Fatigoni, P. A. R. Ade, Z. Ahmed, M. Amiri, D. Barkats, R. Basu Thakur, C. A. Bischoff, D. Beck, J. J. Bock, V. Buza, J. Cheshire, J. Connors, J. Cornelison, M. Crumrine, A. J. Cukierman, E. V. Denison, M. I. Dierickx, L. Duband, M. Eiben, J. P. Filippini, A. Fortes, M. Gao, C. Giannakopoulos, N. Goeckner-Wald, D. C. Goldfinger , et al. (62 additional authors not shown)

Abstract: Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the… ▽ More Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the focal plane. The constraints set by these two receivers required a redesign of the warm readout electronics. The new version of the standard Multi Channel Electronics, developed and built at the University of British Columbia, is presented here for the first time. BICEP Array operates Time Division Multiplexing readout technology to the limits of its capabilities in terms of multiplexing rate, noise and crosstalk, and applies them in rigorously demanding scientific application requiring extreme noise performance and systematic error control. Future experiments like CMB-S4 plan to use TES bolometers with Time Division/SQUID-based readout for an even larger number of detectors. △ Less

Submitted 24 October, 2023; v1 submitted 16 October, 2023; originally announced October 2023.

Comments: 10 pages, 7 figures, Submitted to Journal of Low Temperature Physics

Journal ref: Journal of Low Temperature Physics (2024)

Preparing pure $^{43}$Ca$^+$ samples in an ion trap with photoionization and parametric excitations

Authors: C. -H. Kuo, Y. -C. Hsiao, C. -Y. Jhang, Y. -D. Chen, S. Tung

Abstract: We present a practical scheme for the efficient preparation of laser-cooled $^{43}$Ca$^+$ ions in an ion trap. Our approach integrates two well-established methods: isotope-selective photoionization and isotope-specific parametric excitation. Drawing inspiration from the individual merits of each method, we have successfully integrated these techniques to prepare extended chains of $^{43}$Ca$^+$ i… ▽ More We present a practical scheme for the efficient preparation of laser-cooled $^{43}$Ca$^+$ ions in an ion trap. Our approach integrates two well-established methods: isotope-selective photoionization and isotope-specific parametric excitation. Drawing inspiration from the individual merits of each method, we have successfully integrated these techniques to prepare extended chains of $^{43}$Ca$^+$ ions, overcoming the challenge posed by their low natural abundance of 0.135\% in a natural source. Furthermore, we explore the subtleties of our scheme, focusing on the influence of different factors on the purification process. Our investigation contributes to a broader understanding of the technique and highlights the adaptability of established methods in addressing specific isotopic challenges. △ Less

Submitted 1 February, 2024; v1 submitted 21 September, 2023; originally announced September 2023.

Comments: 11 pages, 7 figures; new version with major revision

Surface Second Harmonic Generation from Topological Dirac Semimetal PdTe$_2$

Authors: Syed Mohammed Faizanuddin, Ching-Hang Chien, Yao-Jui Chan, Si-Tong Liu, Chia-Nung Kuo, Chin Shuan Lue, Yu-Chieh Wen

Abstract: Recent experiments and calculations in topological semimetals have observed anomalously strong second-order optical nonlinearity, but yet whether the enhancement also occurs at surfaces of topological semimetals in general remains an open question. In this work, we tackle this problem by measuring polarization-dependent and rotational-anisotropy optical second harmonic generation (SHG) from centro… ▽ More Recent experiments and calculations in topological semimetals have observed anomalously strong second-order optical nonlinearity, but yet whether the enhancement also occurs at surfaces of topological semimetals in general remains an open question. In this work, we tackle this problem by measuring polarization-dependent and rotational-anisotropy optical second harmonic generation (SHG) from centrosymmetric type-II Dirac semimetal PdTe$_2$. We found the SHG to follow C$_{3v}$ surface symmetry with a time-varying intensity dictated by the oxidation kinetics of the material after its surface cleavage, indicating the surface origin of SHG. Quantitative characterization of the surface nonlinear susceptibility indicates a large out-of-plane response of PdTe$_2$ with $|χ_{ccc}^{(2)}|$ up to 25 $\times$ 10$^{-18}$ m$^2$/V. Our results support the topological surfaces/interfaces as a new route toward applications of nonlinear optical effects with released symmetry constraints, and demonstrate SHG as a viable means to in situ study of kinetics of topological surfaces. △ Less

Submitted 17 August, 2023; originally announced August 2023.

Calibration and Physics with ARA Station 1: A Unique Askaryan Radio Array Detector

Authors: M. F. H Seikh, D. Z. Besson, S. Ali, P. Allison, S. Archambault, J. J. Beatty, A. Bishop, P. Chen, Y. C. Chen, B. A. Clark, W. Clay, A. Connolly, K. Couberly, L. Cremonesi, A. Cummings, P. Dasgupta, R. Debolt, S. De Kockere, K. D. de Vries, C. Deaconu, M. A. DuVernois, J. Flaherty, E. Friedman, R. Gaior, P. Giri , et al. (48 additional authors not shown)

Abstract: The Askaryan Radio Array Station 1 (A1), the first among five autonomous stations deployed for the ARA experiment at the South Pole, is a unique ultra-high energy neutrino (UHEN) detector based on the Askaryan effect that uses Antarctic ice as the detector medium. Its 16 radio antennas (distributed across 4 strings, each with 2 Vertically Polarized (VPol), 2 Horizontally Polarized (HPol) receivers… ▽ More The Askaryan Radio Array Station 1 (A1), the first among five autonomous stations deployed for the ARA experiment at the South Pole, is a unique ultra-high energy neutrino (UHEN) detector based on the Askaryan effect that uses Antarctic ice as the detector medium. Its 16 radio antennas (distributed across 4 strings, each with 2 Vertically Polarized (VPol), 2 Horizontally Polarized (HPol) receivers), and 2 strings of transmitting antennas (calibration pulsers, CPs), each with 1 VPol and 1 HPol channel, are deployed at depths less than 100 m within the shallow firn zone of the 2.8 km thick South Pole (SP) ice. We apply different methods to calibrate its Ice Ray Sampler second generation (IRS2) chip for timing offset and ADC-to-Voltage conversion factors using a known continuous wave input signal to the digitizer, and achieve a precision of sub-nanoseconds. We achieve better calibration for odd, compared to even samples, and also find that the HPols under-perform relative to the VPol channels. Our timing calibrated data is subsequently used to calibrate the ADC-to-Voltage conversion as well as precise antenna locations, as a precursor to vertex reconstruction. The calibrated data will then be analyzed for UHEN signals in the final step of data compression. The ability of A1 to scan the firn region of SP ice sheet will contribute greatly towards a 5-station analysis and will inform the design of the planned IceCube Gen-2 radio array. △ Less

Submitted 14 August, 2023; originally announced August 2023.

Comments: 10 pages

Journal ref: PoS ICRC2023 (2023) 1163

Tomography Scan of Charge Density Wave in NbSe2

Authors: Jyun-Yu Wu, Yung-Ting Lee, Guan-Hao Chen, Zheng-Hong Li, Chang-Tsan Lee, Jie-Yu Hsu, Chia-Nung Kuo, Juhn-Jong Lin, Wen-Hao Chang, Chin-Shan Lue, Po-Tuan Cheng, Cheng-Tien Chiang, Chien-Cheng Kuo, Chien-Te Wu, Chi-Cheng Lee, Ming-Chiang Chung, Hung-Chung Hsueh, Chun-Liang Lin

Abstract: Charge density wave (CDW) resulted from a small distortion in the lattice is able to create new orders beyond the original lattice. In 2H-NbSe2, one of the layered transition metal dichalcogenides (TMD), the 3x3 charge order appears in two-dimensional (2D) layers. Although CDW is usually described by a sine wave, the spatial distribution within a 2D layer has never been systematically visualized.… ▽ More Charge density wave (CDW) resulted from a small distortion in the lattice is able to create new orders beyond the original lattice. In 2H-NbSe2, one of the layered transition metal dichalcogenides (TMD), the 3x3 charge order appears in two-dimensional (2D) layers. Although CDW is usually described by a sine wave, the spatial distribution within a 2D layer has never been systematically visualized. Here by using scanning tunneling microscopy (STM) and density functional theory (DFT), we have monitored the evolution of 3x3 CDW along c-axis and realized a nearly tomography scan of CDW of the topmost layer. The results show that the strength of 3x3 charge order varies while increasing the tunneling current. The 3x3 charge order is relatively strong at the outermost Se level and decreases while probing in between Se and Nb levels. Interestingly, the 3x3 charge order gets strong again as reaching Nb level but along with a phase shift. We further calculated the orbital charge distributions and found that both CDW intensity modulation and phase shift are strongly correlated with the distribution of Se p orbitals and Nb d orbitals. △ Less

Submitted 21 March, 2023; originally announced March 2023.

Comments: 12 pages, 4 figures

Van der Waals device integration beyond the limits of van der Waals forces via adhesive matrix transfer

Authors: Peter F. Satterthwaite, Weikun Zhu, Patricia Jastrzebska-Perfect, Melbourne Tang, Hongze Gao, Hikari Kitadai, Ang-Yu Lu, Qishuo Tan, Shin-Yi Tang, Yu-Lun Chueh, Chia-Nung Kuo, Chin Shan Lue, **g Kong, Xi Ling, Farnaz Niroui

Abstract: Pristine van der Waals (vdW) interfaces between two-dimensional (2D) and other materials are core to emerging optical and electronic devices. Their direct fabrication is, however, challenged as the vdW forces are weak and cannot be tuned to accommodate integration of arbitrary layers without solvents, sacrificial-layers or high-temperatures, steps that can introduce damage. To address these limita… ▽ More Pristine van der Waals (vdW) interfaces between two-dimensional (2D) and other materials are core to emerging optical and electronic devices. Their direct fabrication is, however, challenged as the vdW forces are weak and cannot be tuned to accommodate integration of arbitrary layers without solvents, sacrificial-layers or high-temperatures, steps that can introduce damage. To address these limitations, we introduce a single-step 2D material-to-device integration approach in which forces promoting transfer are decoupled from the vdW forces at the interface of interest. We use this adhesive matrix transfer to demonstrate conventionally-forbidden direct integration of diverse 2D materials (MoS2, WSe2, PtS2, GaS) with dielectrics (SiO2, Al2O3), and scalable, aligned heterostructure formation, both foundational to device development. We then demonstrate a single-step integration of monolayer-MoS2 into arrays of transistors. With no exposure to polymers or solvents, clean interfaces and pristine surfaces are preserved, which can be further engineered to demonstrate both n- and p-type behavior. Beyond serving as a platform to probe the intrinsic properties of sensitive nanomaterials without the influence of processing steps, our technique allows efficient formation of unconventional device form-factors, with an example of flexible transistors demonstrated. △ Less

Submitted 12 February, 2023; originally announced February 2023.

TeD-Q: a tensor network enhanced distributed hybrid quantum machine learning framework

Authors: Yaocheng Chen, Xingyao Wu, Chung-Yun Kuo, Yuxuan Du, Dacheng Tao

Abstract: TeD-Q is an open-source software framework for quantum machine learning, variational quantum algorithm (VQA), and simulation of quantum computing. It seamlessly integrates classical machine learning libraries with quantum simulators, giving users the ability to leverage the power of classical machine learning while training quantum machine learning models. TeD-Q supports auto-differentiation that… ▽ More TeD-Q is an open-source software framework for quantum machine learning, variational quantum algorithm (VQA), and simulation of quantum computing. It seamlessly integrates classical machine learning libraries with quantum simulators, giving users the ability to leverage the power of classical machine learning while training quantum machine learning models. TeD-Q supports auto-differentiation that provides backpropagation, parameters shift, and finite difference methods to obtain gradients. With tensor contraction, simulation of quantum circuits with large number of qubits is possible. TeD-Q also provides a graphical mode in which the quantum circuit and the training progress can be visualized in real-time. △ Less

Submitted 13 January, 2023; originally announced January 2023.

Comments: 17 pages, 15 figures

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

Input optics systems of the KAGRA detector during O3GK

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, H. Asada, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, Z. Cao, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, C-I. Chiang, H. Chu, Y-K. Chu, S. Eguchi , et al. (228 additional authors not shown)

Abstract: KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensit… ▽ More KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Design of the ECCE Detector for the Electron Ion Collider

Authors: J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin, R. Capobianco , et al. (259 additional authors not shown)

Abstract: The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent track… ▽ More The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector. △ Less

Submitted 11 May, 2023; v1 submitted 6 September, 2022; originally announced September 2022.

Comments: 32 pages, 29 figures, 9 tables

Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept

Authors: A. Bylinkin, C. T. Dean, S. Fegan, D. Gangadharan, K. Gates, S. J. D. Kay, I. Korover, W. B. Li, X. Li, R. Montgomery, D. Nguyen, G. Penman, J. R. Pybus, N. Santiesteban, R. Trotta, A. Usman, M. D. Baker, J. Frantz, D. I. Glazier, D. W. Higinbotham, T. Horn, J. Huang, G. Huber, R. Reed, J. Roche , et al. (258 additional authors not shown)

Abstract: This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fr… ▽ More This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector. △ Less

Submitted 6 March, 2023; v1 submitted 30 August, 2022; originally announced August 2022.

SLAC Microresonator RF (SMuRF) Electronics: A tone-tracking readout system for superconducting microwave resonator arrays

Authors: Cyndia Yu, Zeeshan Ahmed, Josef C. Frisch, Shawn W. Henderson, Max Silva-Feaver, Kam Arnold, David Brown, Jake Connors, Ari J. Cukierman, J. Mitch D'Ewart, Bradley J. Dober, John E. Dusatko, Gunther Haller, Ryan Herbst, Gene C. Hilton, Johannes Hubmayr, Kent D. Irwin, Chao-Lin Kuo, John A. B. Mates, Larry Ruckman, Joel Ullom, Leila Vale, Daniel D. Van Winkle, Jesus Vasquez, Edward Young

Abstract: We describe the newest generation of the SLAC Microresonator RF (SMuRF) electronics, a warm digital control and readout system for microwave-frequency resonator-based cryogenic detector and multiplexer systems such as microwave SQUID multiplexers ($μ$mux) or microwave kinetic inductance detectors (MKIDs). Ultra-sensitive measurements in particle physics and astronomy increasingly rely on large arr… ▽ More We describe the newest generation of the SLAC Microresonator RF (SMuRF) electronics, a warm digital control and readout system for microwave-frequency resonator-based cryogenic detector and multiplexer systems such as microwave SQUID multiplexers ($μ$mux) or microwave kinetic inductance detectors (MKIDs). Ultra-sensitive measurements in particle physics and astronomy increasingly rely on large arrays of cryogenic sensors, which in turn necessitate highly multiplexed readout and accompanying room-temperature electronics. Microwave-frequency resonators are a popular tool for cryogenic multiplexing, with the potential to multiplex thousands of detector channels on one readout line. The SMuRF system provides the capability for reading out up to 3328 channels across a 4-8 GHz bandwidth. Notably, the SMuRF system is unique in its implementation of a closed-loop tone-tracking algorithm that minimizes RF power transmitted to the cold amplifier, substantially relaxing system linearity requirements and effective noise from intermodulation products. Here we present a description of the hardware, firmware, and software systems of the SMuRF electronics, comparing achieved performance with science-driven design requirements. We focus in particular on the case of large channel count, low bandwidth applications, but the system has been easily reconfigured for high bandwidth applications. The system described here has been successfully deployed in lab settings and field sites around the world and is baselined for use on upcoming large-scale observatories. △ Less

Submitted 22 August, 2022; originally announced August 2022.

Comments: 28 pages, 25 figures, + references. Comments welcome!

Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider

Authors: X. Li, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin , et al. (262 additional authors not shown)

Abstract: The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will… ▽ More The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region. △ Less

Submitted 23 July, 2022; v1 submitted 21 July, 2022; originally announced July 2022.

Comments: Open heavy flavor studies with the EIC reference detector design by the ECCE consortium. 11 pages, 11 figures, to be submitted to the Nuclear Instruments and Methods A

Report number: LANL report number: LA-UR-22-27181

Exclusive J/$ψ$ Detection and Physics with ECCE

Authors: X. Li, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin , et al. (262 additional authors not shown)

Abstract: Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the… ▽ More Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE. △ Less

Submitted 21 July, 2022; originally announced July 2022.

Comments: 11 pages, 14 figures, 1 table

Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider

Authors: F. Bock, N. Schmidt, P. K. Wang, N. Santiesteban, T. Horn, J. Huang, J. Lajoie, C. Munoz Camacho, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, W. Boeglin, M. Borysova, E. Brash , et al. (263 additional authors not shown)

Abstract: We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key… ▽ More We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented. △ Less

Submitted 19 July, 2022; originally announced July 2022.

Comments: 19 pages, 22 figures, 5 tables

AI-assisted Optimization of the ECCE Tracking System at the Electron Ion Collider

Authors: C. Fanelli, Z. Papandreou, K. Suresh, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann , et al. (258 additional authors not shown)

Abstract: The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to… ▽ More The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5T solenoid. The EIC detector proposal review concluded that the ECCE design will serve as the reference design for an EIC detector. Herein we describe a comprehensive optimization of the ECCE tracker using AI. The work required a complex parametrization of the simulated detector system. Our approach dealt with an optimization problem in a multidimensional design space driven by multiple objectives that encode the detector performance, while satisfying several mechanical constraints. We describe our strategy and show results obtained for the ECCE tracking system. The AI-assisted design is agnostic to the simulation framework and can be extended to other sub-detectors or to a system of sub-detectors to further optimize the performance of the EIC detector. △ Less

Submitted 19 May, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 16 pages, 18 figures, 2 appendices, 3 tables

Scientific Computing Plan for the ECCE Detector at the Electron Ion Collider

Authors: J. C. Bernauer, C. T. Dean, C. Fanelli, J. Huang, K. Kauder, D. Lawrence, J. D. Osborn, C. Paus, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, F. Bock, W. Boeglin, M. Borysova, E. Brash , et al. (256 additional authors not shown)

Abstract: The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing thes… ▽ More The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required for the future of ECCE are described. △ Less

Submitted 17 May, 2022; originally announced May 2022.

Journal ref: NIMA 1047, 167859 (2023)

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, F. Alam Khan, M. Alhusseini, J. Alison, A. Alpana, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Bannerjee, P. Bargassa, D. Barney, F. Beaudette , et al. (364 additional authors not shown)

Abstract: The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu… ▽ More The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation. △ Less

Submitted 31 March, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

Photonic Topological Transitions and Epsilon-Near-Zero Surface Plasmons in Type-II Dirac Semimetal NiTe$_2$

Authors: Carlo Rizza, Debasis Dutta, Barun Ghosh, Francesca Alessandro, Chia-Nung Kuo, Chin Shan Lue, Lorenzo S. Caputi, Arun Bansil, Amit Agarwal, Antonio Politano, Anna Cupolillo

Abstract: Compared to artificial metamaterials, where nano-fabrication complexities and finite-size inclusions can hamper the desired electromagnetic response, several natural materials like van der Waals crystals hold great promise for designing efficient nanophotonic devices in the optical range. Here, we investigate the unusual optical response of NiTe$_2$, a van der Waals crystal and a type-II Dirac sem… ▽ More Compared to artificial metamaterials, where nano-fabrication complexities and finite-size inclusions can hamper the desired electromagnetic response, several natural materials like van der Waals crystals hold great promise for designing efficient nanophotonic devices in the optical range. Here, we investigate the unusual optical response of NiTe$_2$, a van der Waals crystal and a type-II Dirac semimetal hosting Lorentz-violating Dirac fermions. By {\it ab~initio~} density functional theory modeling, we show that NiTe$_2$ harbors multiple topological photonic regimes for evanescent waves (such as surface plasmons) across the near-infrared and optical range. By electron energy-loss experiments, we identify surface plasmon resonances near the photonic topological transition points at the epsilon-near-zero (ENZ) frequencies $\approx 0.79$, $1.64$, and $2.22$ eV. Driven by the extreme crystal anisotropy and the presence of Lorentz-violating Dirac fermions, the experimental evidence of ENZ surface plasmon resonances confirm the non-trivial photonic and electronic topology of NiTe$_2$. Our study paves the way for realizing devices for light manipulation at the deep-subwavelength scales based on electronic and photonic topological physics for nanophotonics, optoelectronics, imaging, and biosensing applications. △ Less

Submitted 5 October, 2021; originally announced October 2021.

Comments: 12 pages, 11 figures

Journal ref: ACS Applied Nano Materials (2022)

Construction and commissioning of CMS CE prototype silicon modules

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul… ▽ More As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: 35 pages, submitted to JINST

Receiver development for BICEP Array, a next-generation CMB polarimeter at the South Pole

Authors: L. Moncelsi, P. A. R. Ade, Z. Ahmed, M. Amiri, D. Barkats, R. Basu Thakur, C. A. Bischoff, J. J. Bock, V. Buza, J. Cheshire, J. Connors, J. Cornelison, M. Crumrine, A. Cukierman, E. V. Denison, M. Dierickx, L. Duband, M. Eiben, S. Fatigoni, J. P. Filippini, N. Goeckner-Wald, D. C. Goldfinger, J. Grayson, P. Grimes, G. Hall , et al. (50 additional authors not shown)

Abstract: A detection of curl-type ($B$-mode) polarization of the primary CMB would be direct evidence for the inflationary paradigm of the origin of the Universe. The BICEP/Keck Array (BK) program targets the degree angular scales, where the power from primordial $B$-mode polarization is expected to peak, with ever-increasing sensitivity and has published the most stringent constraints on inflation to date… ▽ More A detection of curl-type ($B$-mode) polarization of the primary CMB would be direct evidence for the inflationary paradigm of the origin of the Universe. The BICEP/Keck Array (BK) program targets the degree angular scales, where the power from primordial $B$-mode polarization is expected to peak, with ever-increasing sensitivity and has published the most stringent constraints on inflation to date. BICEP Array (BA) is the Stage-3 instrument of the BK program and will comprise four BICEP3-class receivers observing at 30/40, 95, 150 and 220/270 GHz with a combined 32,000+ detectors; such wide frequency coverage is necessary for control of the Galactic foregrounds, which also produce degree-scale $B$-mode signal. The 30/40 GHz receiver is designed to constrain the synchrotron foreground and has begun observing at the South Pole in early 2020. By the end of a 3-year observing campaign, the full BICEP Array instrument is projected to reach $σ_r$ between 0.002 and 0.004, depending on foreground complexity and degree of removal of $B$-modes due to gravitational lensing (delensing). This paper presents an overview of the design, measured on-sky performance and calibration of the first BA receiver. We also give a preview of the added complexity in the time-domain multiplexed readout of the 7,776-detector 150 GHz receiver. △ Less

Submitted 7 December, 2020; originally announced December 2020.

Comments: Proceedings of SPIE 2020 (AS111). This article supersedes arXiv:1808.00568 and arXiv:2002.05228

The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca… ▽ More The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers. △ Less

Submitted 8 December, 2020; v1 submitted 7 December, 2020; originally announced December 2020.

Lithium-cesium slow beam from a two-dimensional magneto-optical trap

Authors: Y. -D. Chen, W. -X. Li, M. -E. Chou, C. -H. Kuo, C. -S. Li, S. Tung

Abstract: We present the creation of a lithium-cesium slow beam using a two-dimensional magneto-optical trap. The two-species atomic beam is directed to load a three-dimensional magneto-optical trap in ultrahigh vacuum. We achieve a loading rate of 1.3$\times$10$^{7}$ lithium atoms/s with the lithium oven temperature at 370~$^{\circ}$C and 2.2$\times$10$^{7}$ cesium atoms/s with the Cs oven temperature at 2… ▽ More We present the creation of a lithium-cesium slow beam using a two-dimensional magneto-optical trap. The two-species atomic beam is directed to load a three-dimensional magneto-optical trap in ultrahigh vacuum. We achieve a loading rate of 1.3$\times$10$^{7}$ lithium atoms/s with the lithium oven temperature at 370~$^{\circ}$C and 2.2$\times$10$^{7}$ cesium atoms/s with the Cs oven temperature at 20~$^{\circ}$C. The maximum numbers of lithium and cesium atoms in the trap are 1.0$\times$10$^{9}$ and 1.4$\times$10$^{8}$, respectively. Our results show that the simple and compact two-dimensional magneto-optical trap is suitable for producing an atomic beam of two species that have a large mass ratio and very different volatilities. △ Less

Submitted 23 February, 2021; v1 submitted 1 December, 2020; originally announced December 2020.

Comments: 7 pages, 7 figures

Journal ref: Phys. Rev. A 103, 023102 (2021)

Modeling in-ice radio propagation with parabolic equation methods

Authors: S. Prohira, C. Sbrocco, P. Allison, J. Beatty, D. Besson, A. Connolly, P. Dasgupta, C. Deaconu, K. D. de Vries, S. De Kockere, D. Frikken, C. Hast, E. Huesca Santiago, C. -Y. Kuo, U. A. Latif, V. Lukic, T. Meures, K. Mulrey, J. Nam, A. Nozdrina, J. P. Ralston, R. S. Stanley, J. Torres, S. Toscano, D. Van den Broeck , et al. (2 additional authors not shown)

Abstract: We investigate the use of parabolic equation (PE) methods for solving radio-wave propagation in polar ice. PE methods provide an approximate solution to Maxwell's equations, in contrast to full-field solutions such as finite-difference-time-domain (FDTD) methods, yet provide a more complete model of propagation than simple geometric ray-tracing (RT) methods that are the current state of the art fo… ▽ More We investigate the use of parabolic equation (PE) methods for solving radio-wave propagation in polar ice. PE methods provide an approximate solution to Maxwell's equations, in contrast to full-field solutions such as finite-difference-time-domain (FDTD) methods, yet provide a more complete model of propagation than simple geometric ray-tracing (RT) methods that are the current state of the art for simulating in-ice radio detection of neutrino-induced cascades. PE are more computationally efficient than FDTD methods, and more flexible than RT methods, allowing for the inclusion of diffractive effects, and modeling of propagation in regions that cannot be modeled with geometric methods. We present a new PE approximation suited to the in-ice case. We conclude that current ray-tracing methods may be too simplistic in their treatment of ice properties, and their continued use could overestimate experimental sensitivity for in-ice neutrino detection experiments. We discuss the implications for current in-ice Askaryan-type detectors and for the upcoming Radar Echo Telescope; two families of experiments for which these results are most relevant. We suggest that PE methods be investigated further for in-ice radio applications. △ Less

Submitted 18 July, 2021; v1 submitted 11 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. D 103, 103007 (2021)

Symmetrically Tuned Large-Volume Conic Shell-Cavities for Axion Searches

Authors: Chao-Lin Kuo

Abstract: In an earlier paper, a new class of thin-shell cavities were proposed to evade the steep frequency scaling of conventional axion haloscopes. In this follow-up work, we see that a generalized conic geometry enables robust frequency-tuning for these large-volume cm-wave cavities. The frequency-defining dimension of a conic shell-cavity changes symmetrically and uniformly during tuning, maintaining a… ▽ More In an earlier paper, a new class of thin-shell cavities were proposed to evade the steep frequency scaling of conventional axion haloscopes. In this follow-up work, we see that a generalized conic geometry enables robust frequency-tuning for these large-volume cm-wave cavities. The frequency-defining dimension of a conic shell-cavity changes symmetrically and uniformly during tuning, maintaining a high axion coupling efficiency (the form factor) to an external solenoid field. It is further shown that such tunable geometry is not restricted to circular cones. A general prescription for arbitrary volume-filling conic shell-cavities is developed and direct solutions are obtained for the created numerical models. The largest of the realized designs is a meandering "brain" cavity that is tunable over a frequency range of 20%. The scan rate of this cavity is three orders of magnitude larger than that of a scaled cylindrical cavity used in the current generation experiments. The prospects for such a large improvement in the scan rate should motivate R & D efforts in fabrication and other implementation techniques. If these engineering challenges can be met, cavity-based axion haloscopes can stay competitive at frequencies higher than a few GHz. We propose an experimental configuration at 20 GHz (~ 80 $μ$eV) using an array of brain cavities and compare it with other proposals for similar frequencies. △ Less

Submitted 10 December, 2020; v1 submitted 8 October, 2020; originally announced October 2020.

Comments: Reference updated, to appear in JCAP

The Payload for Ultrahigh Energy Observations (PUEO): A White Paper

Authors: Q. Abarr, P. Allison, J. Ammerman Yebra, J. Alvarez-Muñiz, J. J. Beatty, D. Z. Besson, P. Chen, Y. Chen, J. M. Clem, A. Connolly, L. Cremonesi, C. Deaconu, J. Flaherty, D. Frikken, P. W. Gorham, C. Hast, C. Hornhuber, J. J. Huang, K. Hughes, A. Hynous, Y. Ku, C. -Y. Kuo, T. C. Liu, Z. Martin, C. Miki , et al. (25 additional authors not shown)

Abstract: The Payload for Ultrahigh Energy Observations (PUEO) long-duration balloon experiment is designed to have world-leading sensitivity to ultrahigh-energy neutrinos at energies above 1 EeV. Probing this energy region is essential for understanding the extreme-energy universe at all distance scales. PUEO leverages experience from and supersedes the successful Antarctic Impulsive Transient Antenna (ANI… ▽ More The Payload for Ultrahigh Energy Observations (PUEO) long-duration balloon experiment is designed to have world-leading sensitivity to ultrahigh-energy neutrinos at energies above 1 EeV. Probing this energy region is essential for understanding the extreme-energy universe at all distance scales. PUEO leverages experience from and supersedes the successful Antarctic Impulsive Transient Antenna (ANITA) program, with an improved design that drastically improves sensitivity by more than an order of magnitude at energies below 30 EeV. PUEO will either make the first significant detection of or set the best limits on ultrahigh-energy neutrino fluxes. △ Less

Submitted 20 September, 2021; v1 submitted 6 October, 2020; originally announced October 2020.

Comments: 40 pages, 17 figures. Version accepted to JINST

Journal ref: JINST 16 (2021) 08, P08035

Acoustic prediction of flowrate: varying liquid jet stream onto a free surface

Authors: Balamurali B T, Edwin Jonathan Aslim, Yun Shu Lynn Ng, Tricia Li, Chuen Kuo, Jacob Shihang Chen, Dorien Herremans, Lay Guat Ng, Jer-Ming Chen

Abstract: Information on liquid jet stream flow is crucial in many real world applications. In a large number of cases, these flows fall directly onto free surfaces (e.g. pools), creating a splash with accompanying splashing sounds. The sound produced is supplied by energy interactions between the liquid jet stream and the passive free surface. In this investigation, we collect the sound of a water jet of v… ▽ More Information on liquid jet stream flow is crucial in many real world applications. In a large number of cases, these flows fall directly onto free surfaces (e.g. pools), creating a splash with accompanying splashing sounds. The sound produced is supplied by energy interactions between the liquid jet stream and the passive free surface. In this investigation, we collect the sound of a water jet of varying flowrate falling into a pool of water, and use this sound to predict the flowrate and flowrate trajectory involved. Two approaches are employed: one uses machine-learning models trained using audio features extracted from the collected sound to predict the flowrate (and subsequently the flowrate trajectory). In contrast, the second method directly uses acoustic parameters related to the spectral energy of the liquid-liquid interaction to estimate the flowrate trajectory. The actual flowrate, however, is determined directly using a gravimetric method: tracking the change in mass of the pooling liquid over time. We show here that the two methods agree well with the actual flowrate and offer comparable performance in accurately predicting the flowrate trajectory, and accordingly offer insights for potential real-life applications using sound. △ Less

Submitted 16 June, 2020; originally announced June 2020.

MSC Class: 76-XX; 92C55; 92-XX ACM Class: J.2

Journal ref: Proceedings of the IEEE International Conference on Signal Processing and Communications (SPCOM), 2020

Overview of KAGRA: Detector design and construction history

Authors: T. Akutsu, M. Ando, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. -W. Bae, Y. -B. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. -L. Chan, C. -S. Chen, K. -H. Chen, Y. -R. Chen, H. -Y. Chu, Y-K. Chu, S. Eguchi, Y. Enomoto, R. Flaminio, Y. Fujii , et al. (175 additional authors not shown)

Abstract: KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA… ▽ More KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA finished all installations with the designed configuration, which we call the baseline KAGRA. In this occasion, we present an overview of the baseline KAGRA from various viewpoints in a series of of articles. In this article, we introduce the design configurations of KAGRA with its historical background. △ Less

Submitted 2 July, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 33 pages, 10 figures

Characterizing the Sensitivity of 40 GHz TES Bolometers for BICEP Array

Authors: C. Zhang, P. A. R. Ade, Z. Ahmed, M. Amiri, D. Barkats, R. Basu Thakur, C. A. Bischoff, J. J. Bock, H. Boenish, E. Bullock, V. Buza, J. Cheshire, J. Connors, J. Cornelison, M. Crumrine, A. Cukierman, M. Dierickx, L. Duband, S. Fatigoni, J. P. Filippini, G. Hall, M. Halpern, S. Harrison, S. Henderson, S. R. Hildebrandt , et al. (44 additional authors not shown)

Abstract: The BICEP/Keck (BK) experiment aims to detect the imprint of primordial gravitational waves in the Cosmic Microwave Background polarization, which would be direct evidence of the inflation theory. While the tensor-to-scalar ratio has been constrained to be r_0.05 < 0.06 at 95% c.l., further improvements on this upper limit are hindered by polarized Galactic foreground emissions and removal of grav… ▽ More The BICEP/Keck (BK) experiment aims to detect the imprint of primordial gravitational waves in the Cosmic Microwave Background polarization, which would be direct evidence of the inflation theory. While the tensor-to-scalar ratio has been constrained to be r_0.05 < 0.06 at 95% c.l., further improvements on this upper limit are hindered by polarized Galactic foreground emissions and removal of gravitational lensing polarization. The 30/40 GHz receiver of the BICEP Array (BA) will deploy at the end of 2019 and will constrain the synchrotron foreground with unprecedented accuracy within the BK sky patch. We will show the design of the 30/40 GHz detectors and test results summarizing its performance. The low optical and atmospheric loading at these frequencies requires our TES detectors to have low saturation power in order to be photon-noise dominated. To realize the low thermal conductivity required from a 250 mK base temperature, we developed new bolometer leg designs. We will present the relevant measured detector parameters: G, Tc, Rn, Psat , and spectral bands, and noise spectra. We achieved a per bolometer NEP including all noise components of 2.07E-17 W/sqrt(Hz), including an anticipated photon noise level 1.54E-17 W/sqrt(Hz). △ Less

Submitted 12 February, 2020; originally announced February 2020.

Comments: Accepted for publication in Journal of Low Temperature Physics

Broadband, millimeter-wave antireflection coatings for large-format, cryogenic aluminum oxide optics

Authors: A. Nadolski, J. D. Vieira, J. A. Sobrin, A. M. Kofman, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. S. Avva, R. Basu Thakur, A. N. Bender, B. A. Benson, L. Bryant, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, J. R. Cheshire IV, G. E. Chesmore, J. F. Cliche, A. Cukierman, T. de Haan, M. Dierickx, J. Ding, D. Dutcher, W. Everett , et al. (64 additional authors not shown)

Abstract: We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of com… ▽ More We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of commercially-available, polytetrafluoroethylene-based, dielectric sheet material. The lenslet coating is molded to fit the 150 mm diameter arrays directly while the large-diameter lenses are coated using a tiled approach. We review the fabrication processes for both prescriptions then discuss laboratory measurements of their transmittance and reflectance. In addition, we present the inferred refractive indices and loss tangents for the coating materials and the aluminum oxide substrate. We find that at 150 GHz and 300 K the large-format coating sample achieves (97 +/- 2)% transmittance and the lenslet coating sample achieves (94 +/- 3)% transmittance. △ Less

Submitted 2 March, 2020; v1 submitted 6 December, 2019; originally announced December 2019.

Comments: 19 pages, 11 figures; submitted 05 Dec 2019, accepted 26 Feb 2020

Journal ref: Applied Optics, Vol. 59, Issue 10, pp. 3285-3295 (2020)

Large-Volume Centimeter-Wave Cavities for Axion Searches

Authors: Chao-Lin Kuo

Abstract: The scan rate of an axion haloscope is proportional to the square of the cavity volume. In this paper, a new class of thin-shell cavities are proposed to search for axionic dark matter. These cavities feature active volume much larger (>20X) than that of a conventional cylindrical haloscope, comparable quality factor Q, and a similar frequency tuning range. Full 3D numerical finite-element analyse… ▽ More The scan rate of an axion haloscope is proportional to the square of the cavity volume. In this paper, a new class of thin-shell cavities are proposed to search for axionic dark matter. These cavities feature active volume much larger (>20X) than that of a conventional cylindrical haloscope, comparable quality factor Q, and a similar frequency tuning range. Full 3D numerical finite-element analyses have been used to show that the TM_010 eigenmodes are singly polarized throughout the volume of the cavity and can facilitate axion-photon conversion in uniform magnetic field produced by a superconducting solenoid. To mitigate spurious mode crowding and volume loss due to localization, a pre-amplification binary summing network will be used for coupling. Because of the favorable frequency-scaling, the new cavities are most suitable for centimeter-wavelength (~ 10-100 GHz), corresponding to the promising post-inflation axion production window. In this frequency range, the tight machining tolerances required for high-Q thin-shell cavities are achievable with standard machining techniques for near-infrared mirrors. △ Less

Submitted 12 May, 2020; v1 submitted 9 October, 2019; originally announced October 2019.

Comments: To appear in JCAP, with updated figures and calculations of the form factor

An arm length stabilization system for KAGRA and future gravitational-wave detectors

Authors: T. Akutsu, M. Ando, K. Arai, K. Arai, Y. Arai, S. Araki, A. Araya, N. Aritomi, Y. Aso, S. Bae, Y. Bae, L. Baiotti, R. Bajpai, M. A. Barton, K. Cannon, E. Capocasa, M. Chan, C. Chen, K. Chen, Y. Chen, H. Chu, Y-K. Chu, K. Doi, S. Eguchi, Y. Enomoto , et al. (181 additional authors not shown)

Abstract: Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, wh… ▽ More Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner. △ Less

Submitted 28 November, 2019; v1 submitted 2 October, 2019; originally announced October 2019.

Comments: 21 pages, 8figures

Journal ref: Class. Quantum Grav. 37 (2020) 035004

Performance of Al-Mn Transition-Edge Sensor Bolometers in SPT-3G

Authors: A. J. Anderson, P. A. R. Ade, Z. Ahmed, J. S. Avva, P. S. Barry, R. Basu Thakur, A. N. Bender, B. A. Benson, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, H. -M. Cho, J. F. Cliche, A. Cukierman, T. de Haan, E. V. Denison, J. Ding, M. A. Dobbs, D. Dutcher, W. Everett, K. R. Ferguson, A. Foster , et al. (64 additional authors not shown)

Abstract: SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of the… ▽ More SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of these detector wafers was replaced by a new wafer fabricated with Al-Mn TESs instead of the Ti/Au design originally deployed for SPT-3G. We present the results of in-lab characterization and on-sky performance of this Al-Mn wafer, including electrical and thermal properties, optical efficiency measurements, and noise-equivalent temperature. In addition, we discuss and account for several calibration-related systematic errors that affect measurements made using frequency-domain multiplexing readout electronics. △ Less

Submitted 27 July, 2019; originally announced July 2019.

Comments: 9 pages, 5 figures, submitted to the Journal of Low Temperature Physics: LTD18 Special Edition

Report number: FERMILAB-PUB-19-359-AE

On-sky performance of the SPT-3G frequency-domain multiplexed readout

Authors: A. N. Bender, A. J. Anderson, J. S. Avva, P. A. R. Ade, Z. Ahmed, P. S. Barry, R. Basu Thakur, B. A. Benson, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, H. -M. Cho, J. F. Cliche, A. Cukierman, T. de Haan, E. V. Denison, J. Ding, M. A. Dobbs, D. Dutcher, W. Everett, K. R. Ferguson, A. Foster , et al. (64 additional authors not shown)

Abstract: Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current… ▽ More Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current receiver on the South Pole Telescope, SPT-3G, uses a 68x fMux system to operate its large-format camera of $\sim$16,000 TES bolometers. We present here the successful implementation and performance of the SPT-3G readout as measured on-sky. Characterization of the noise reveals a median pair-differenced 1/f knee frequency of 33 mHz, indicating that low-frequency noise in the readout will not limit SPT-3G's measurements of sky power on large angular scales. Measurements also show that the median readout white noise level in each of the SPT-3G observing bands is below the expectation for photon noise, demonstrating that SPT-3G is operating in the photon-noise-dominated regime. △ Less

Submitted 25 July, 2019; originally announced July 2019.

Comments: 9 pages, 5 figures submitted to the Journal of Low Temperature Physics: LTD18 Special Edition

Design and characterization of the SPT-3G receiver

Authors: J. A. Sobrin, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. S. Avva, R. Basu Thakur, A. N. Bender, B. A. Benson, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, J. F. Cliche, A. Cukierman, T. de Haan, J. Ding, M. A. Dobbs, D. Dutcher, W. Everett, A. Foster, J. Gallichio, A. Gilbert, J. C. Groh, S. T. Guns, N. W. Halverson , et al. (46 additional authors not shown)

Abstract: The SPT-3G receiver was commissioned in early 2017 on the 10-meter South Pole Telescope (SPT) to map anisotropies in the cosmic microwave background (CMB). New optics, detector, and readout technologies have yielded a multichroic, high-resolution, low-noise camera with impressive throughput and sensitivity, offering the potential to improve our understanding of inflationary physics, astroparticle… ▽ More The SPT-3G receiver was commissioned in early 2017 on the 10-meter South Pole Telescope (SPT) to map anisotropies in the cosmic microwave background (CMB). New optics, detector, and readout technologies have yielded a multichroic, high-resolution, low-noise camera with impressive throughput and sensitivity, offering the potential to improve our understanding of inflationary physics, astroparticle physics, and growth of structure. We highlight several key features and design principles of the new receiver, and summarize its performance to date. △ Less

Submitted 31 August, 2018; originally announced September 2018.

Comments: Conference Presentation at SPIE Astronomical Telescopes + Instrumentation 2018, conference 10708

Journal ref: Proc. SPIE 10708, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX, 107081H (24 August 2018)

Broadband anti-reflective coatings for cosmic microwave background experiments

Authors: A. Nadolski, A. M. Kofman, J. D. Vieira, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. S. Avva, R. Basu Thakur, A. N. Bender, B. A. Benson, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, J. F. Cliche, A. Cukierman, T. de Haan, J. Ding, M. A. Dobbs, D. Dutcher, W. Everett, A. Foster, J. Fu, J. Gallicchio, A. Gilbert , et al. (49 additional authors not shown)

Abstract: The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics motivates the development of quasi-optically-coupled (lenslet-coupled), multi-chroic detectors. These detectors can be sensitive across a broader bandwidth comp… ▽ More The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics motivates the development of quasi-optically-coupled (lenslet-coupled), multi-chroic detectors. These detectors can be sensitive across a broader bandwidth compared to waveguide-coupled detectors. However, the increase in bandwidth comes at a cost: the lenses (up to $\sim$700 mm diameter) and lenslets ($\sim$5 mm diameter, hemispherical lenses on the focal plane) used in these systems are made from high-refractive-index materials (such as silicon or amorphous aluminum oxide) that reflect nearly a third of the incident radiation. In order to maximize the faint CMB signal that reaches the detectors, the lenses and lenslets must be coated with an anti-reflective (AR) material. The AR coating must maximize radiation transmission in scientifically interesting bands and be cryogenically stable. Such a coating was developed for the third generation camera, SPT-3G, of the South Pole Telescope (SPT) experiment, but the materials and techniques used in the development are general to AR coatings for mm-wave optics. The three-layer polytetrafluoroethylene-based AR coating is broadband, inexpensive, and can be manufactured with simple tools. The coating is field tested; AR coated focal plane elements were deployed in the 2016-2017 austral summer and AR coated reimaging optics were deployed in 2017-2018. △ Less

Submitted 31 August, 2018; originally announced September 2018.

Comments: 13 pages, 5 figures

Journal ref: Proceedings of SPIE Volume 10708, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX; 1070843 (2018)

Optical Characterization of the SPT-3G Focal Plane

Authors: Zhaodi Pan, Peter Ade, Zeeshan Ahmed, Anderson Adam, Jason Austermann, Jessica Avva, Ritoban Basu Thakur, Bender Amy, Bradford Benson, John Carlstrom, Faustin Carter, Thomas Cecil, Clarence Chang, Jean-Francois Cliche, Ariel Cukierman, Edward Denison, Tijmen de Haan, Junjia Ding, Matt Dobbs, Daniel Dutcher, Wendeline Everett, Allen Foster, Renae Gannon, Adam Gilbert, John Groh , et al. (51 additional authors not shown)

Abstract: The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lump… ▽ More The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lumped element filters. Ten detector wafers populate the focal plane, which is coupled to the sky via a large-aperture optical system. Here we present the frequency band characterization with Fourier transform spectroscopy, measurements of optical time constants, beam properties, and optical and polarization efficiencies of the focal plane. The detectors have frequency bands consistent with our simulations, and have high average optical efficiency which is 86%, 77% and 66% for the 95, 150 and 220 GHz detectors. The time constants of the detectors are mostly between 0.5 ms and 5 ms. The beam is round with the correct size, and the polarization efficiency is more than 90% for most of the bolometers △ Less

Submitted 8 May, 2018; originally announced May 2018.

Comments: Conference proceeding for Low Temperature Detectors 2017

280 GHz Focal Plane Unit Design and Characterization for the SPIDER-2 Suborbital Polarimeter

Authors: A. S. Bergman, P. A. R. Ade, S. Akers, M. Amiri, J. A. Austermann, J. A. Beall, D. T. Becker, S. J. Benton, J. J. Bock, J. R. Bond, S. A. Bryan, H. C. Chiang, C. R. Contaldi, R. S Domagalski, O. Doré, S. M. Duff, A. J. Duivenvoorden, H. K. Eriksen, M. Farhang, J. P. Filippini, L. M. Fissel, A. A. Fraisse, K. Freese, M. Galloway, A. E. Gambrel , et al. (54 additional authors not shown)

Abstract: We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mod… ▽ More We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mode contamination in the CMB from Galactic dust emission. Each 280 GHz focal plane contains a 16 x 16 grid of corrugated silicon feedhorns coupled to an array of aluminum-manganese transition-edge sensor (TES) bolometers fabricated on 150 mm diameter substrates. In total, the three 280 GHz FPUs contain 1,530 polarization sensitive bolometers (765 spatial pixels) optimized for the low loading environment in flight and read out by time-division SQUID multiplexing. In this paper we describe the mechanical, thermal, and magnetic shielding architecture of the focal planes and present cryogenic measurements which characterize yield and the uniformity of several bolometer parameters. The assembled FPUs have high yields, with one array as high as 95% including defects from wiring and readout. We demonstrate high uniformity in device parameters, finding the median saturation power for each TES array to be ~3 pW at 300 mK with a less than 6% variation across each array at one standard deviation. These focal planes will be deployed alongside the 95 and 150 GHz telescopes in the SPIDER-2 instrument, slated to fly from McMurdo Station in Antarctica in December 2018. △ Less

Submitted 22 November, 2017; v1 submitted 11 November, 2017; originally announced November 2017.

Nanostructure analysis of InGaN/GaN quantum wells based on semi-polar-faced GaN nanorods

Authors: Yu-Sheng Huang, Yu-Hsin Weng, Yung-Sheng Chen, Shih-Wei Feng, Chie-Tong Kuo, Ming-Yen Lu, Yung-Chen Cheng, Ya-** Hsieh, Hsiang-Chen Wang

Abstract: We demonstrate a series of InGaN/GaN double quantum well nanostructure elements. We grow a layer of 2 μm undoped GaN template on top of a (0001)-direction sapphire substrate. A 100 nm SiO2 thin film is deposited on top as a masking pattern layer. This layer is then covered with a 300 nm aluminum layer as the anodic aluminum oxide (AAO) hole pattern layer. After oxalic acid etching, we transfer the… ▽ More We demonstrate a series of InGaN/GaN double quantum well nanostructure elements. We grow a layer of 2 μm undoped GaN template on top of a (0001)-direction sapphire substrate. A 100 nm SiO2 thin film is deposited on top as a masking pattern layer. This layer is then covered with a 300 nm aluminum layer as the anodic aluminum oxide (AAO) hole pattern layer. After oxalic acid etching, we transfer the hole pattern from the AAO layer to the SiO2 layer by reactive ion etching. Lastly, we utilize metal-organic chemical vapor deposition to grow GaN nanorods approximately 1.5 μm in size. We then grow two layers of InGaN/GaN double quantum wells on the semi-polar face of the GaN nanorod substrate under different temperatures. We then study the characteristics of the InGaN/GaN quantum wells formed on the semi-polar faces of GaN nanorods. We report the following findings from our study: first, using SiO2 with repeating hole pattern, we are able to grow high-quality GaN nanorods with diameters of approximately 80-120 nm; second, photoluminescence (PL) measurements enable us to identify Fabry-Perot effect from InGaN/GaN quantum wells on the semi-polar face. We calculate the quantum wells' cavity thickness with obtained PL measurements. Lastly, high resolution TEM images allow us to study the lattice structure characteristics of InGaN/GaN quantum wells on GaN nanorod and identify the existence of threading dislocations in the lattice structure that affects the GaN nanorod's growth mechanism. △ Less

Submitted 13 December, 2016; originally announced December 2016.

Comments: 8 pages, 6 figures

In vivo evaluation of wearable head impact sensors

Authors: Lyndia C. Wu, Vaibhav Nangia, Kevin Bui, Bradley Hammoor, Mehmet Kurt, Fidel Hernandez, Calvin Kuo, David B. Camarillo

Abstract: Inertial sensors are commonly used to measure human head motion. Some sensors have been validated with dummy or cadaver experiments, but methods to evaluate sensors in vivo are lacking. Here we present an in vivo method using high speed video to evaluate teeth-mounted (mouthguard), soft tissue-mounted (skin patch), and headgear-mounted (skull cap) sensors during 6-13g sagittal soccer head impacts.… ▽ More Inertial sensors are commonly used to measure human head motion. Some sensors have been validated with dummy or cadaver experiments, but methods to evaluate sensors in vivo are lacking. Here we present an in vivo method using high speed video to evaluate teeth-mounted (mouthguard), soft tissue-mounted (skin patch), and headgear-mounted (skull cap) sensors during 6-13g sagittal soccer head impacts. Sensor coupling to the skull is quantified by displacement from an ear-canal reference. Mouthguard displacements were within video measurement error (<1mm), while the skin patch and skull cap displaced up to 4mm and 13mm from the ear-canal reference, respectively. We used the mouthguard, which had the least displacement from skull, as the reference to assess 6-degree-of-freedom skin patch and skull cap measurements. Linear and rotational acceleration magnitudes were over-predicted by both the skin patch (with 120% NRMS error for a_mag, 290% for alpha_mag) and the skull cap (320% NRMS error for a_mag, 500% for alpha_mag). Such over-predictions were largely due to out-of-plane motion. To model sensor error, we found that in-plane acceleration peaks from the skin patch in the anterior-posterior direction could be modeled by an underdamped viscoelastic system. In summary, the mouthguard showed tighter skull coupling in vivo than the other sensors. Furthermore, the in vivo methods presented are valuable for investigating skull acceleration sensor technologies. △ Less

Submitted 20 August, 2015; v1 submitted 13 March, 2015; originally announced March 2015.

Fluorescence Imaging In Vivo at Wavelengths beyond 1500 nm

Authors: Shuo Diao, Jeffrey L. Blackburn, Guosong Hong, Alexander L. Antaris, Junlei Chang, Justin Z. Wu, Bo Zhang, Kai Cheng, Calvin J. Kuo, Hongjie Dai

Abstract: Compared to imaging in the visible and near-infrared regions below 900 nm, imaging in the second near-infrared window (NIR-II, 1000-1700 nm) is a promising method for deep-tissue high-resolution optical imaging in vivo mainly due to the reduced scattering of photons traversing through biological tissues. Herein, semiconducting single-walled carbon nanotubes with large diameters were used for in vi… ▽ More Compared to imaging in the visible and near-infrared regions below 900 nm, imaging in the second near-infrared window (NIR-II, 1000-1700 nm) is a promising method for deep-tissue high-resolution optical imaging in vivo mainly due to the reduced scattering of photons traversing through biological tissues. Herein, semiconducting single-walled carbon nanotubes with large diameters were used for in vivo fluorescence imaging in the long-wavelength NIR region (1500-1700 nm, NIR-IIb). With this imaging agent, 3-4 um wide capillary blood vessels at a depth of about 3 mm could be resolved. Meanwhile, the blood-flow speeds in multiple individual vessels could be mapped simultaneously. Furthermore, NIR-IIb tumor imaging of a live mouse was explored. NIR-IIb imaging can be generalized to a wide range of fluorophores emitting at up to 1700 nm for high-performance in vivo optical imaging. △ Less

Submitted 2 November, 2015; v1 submitted 9 February, 2015; originally announced February 2015.

Comments: 29 pages, 5 main figures and 11 supplementary figures

Journal ref: Angewandte Chemie International Edition, 2015

Through Skull Fluorescence Imaging of the Brain in a New Near-Infrared Window

Authors: Guosong Hong, Shuo Diao, Junlei Chang, Alexander L. Antaris, Changxin Chen, Bo Zhang, Su Zhao, Dmitriy N. Atochin, Paul L. Huang, Katrin I. Andreasson, Calvin J. Kuo, Hongjie Dai

Abstract: To date, brain imaging has largely relied on X-ray computed tomography and magnetic resonance angiography with limited spatial resolution and long scanning times. Fluorescence-based brain imaging in the visible and traditional near-infrared regions (400-900 nm) is an alternative but currently requires craniotomy, cranial windows and skull thinning techniques, and the penetration depth is limited t… ▽ More To date, brain imaging has largely relied on X-ray computed tomography and magnetic resonance angiography with limited spatial resolution and long scanning times. Fluorescence-based brain imaging in the visible and traditional near-infrared regions (400-900 nm) is an alternative but currently requires craniotomy, cranial windows and skull thinning techniques, and the penetration depth is limited to 1-2 mm due to light scattering. Here, we report through-scalp and through-skull fluorescence imaging of mouse cerebral vasculature without craniotomy utilizing the intrinsic photoluminescence of single-walled carbon nanotubes in the 1.3-1.4 micrometre near-infrared window. Reduced photon scattering in this spectral region allows fluorescence imaging reaching a depth of >2 mm in mouse brain with sub-10 micrometre resolution. An imaging rate of ~5.3 frames/s allows for dynamic recording of blood perfusion in the cerebral vessels with sufficient temporal resolution, providing real-time assessment of blood flow anomaly in a mouse middle cerebral artery occlusion stroke model. △ Less

Submitted 7 August, 2014; originally announced August 2014.

Comments: 38 pages, 4 main figures and 11 Supplementary figures. published in Nature Photonics, 2014

Design and construction of a carbon fiber gondola for the SPIDER balloon-borne telescope

Authors: J. D. Soler, P. A. R. Ade, M. Amiri, S. J. Benton, J. J. Bock, J. R. Bond, S. A. Bryan, C. Chiang, C. C. Contaldi, B. P. Crill, O. P. Doré, M. Farhang, J. P. Filippini, L. M. Fissel, A. A. Fraisse, A. E. Gambrel, N. N. Gandilo, S. Golwala, J. E. Gudmundsson, M. Halpern, M. Hasselfield, G. C. Hilton, W. A. Holmes, V. V. Hristov, K. D. Irwin , et al. (22 additional authors not shown)

Abstract: We introduce the light-weight carbon fiber and aluminum gondola designed for the SPIDER balloon-borne telescope. SPIDER is designed to measure the polarization of the Cosmic Microwave Background radiation with unprecedented sensitivity and control of systematics in search of the imprint of inflation: a period of exponential expansion in the early Universe. The requirements of this balloon-borne in… ▽ More We introduce the light-weight carbon fiber and aluminum gondola designed for the SPIDER balloon-borne telescope. SPIDER is designed to measure the polarization of the Cosmic Microwave Background radiation with unprecedented sensitivity and control of systematics in search of the imprint of inflation: a period of exponential expansion in the early Universe. The requirements of this balloon-borne instrument put tight constrains on the mass budget of the payload. The SPIDER gondola is designed to house the experiment and guarantee its operational and structural integrity during its balloon-borne flight, while using less than 10% of the total mass of the payload. We present a construction method for the gondola based on carbon fiber reinforced polymer tubes with aluminum inserts and aluminum multi-tube joints. We describe the validation of the model through Finite Element Analysis and mechanical tests. △ Less

Submitted 7 July, 2014; originally announced July 2014.

Comments: 16 pages, 11 figures. Presented at SPIE Ground-based and Airborne Telescopes V, June 23, 2014. To be published in Proceedings of SPIE Volume 9145

Thermal architecture for the SPIDER flight cryostat

Authors: J. E. Gudmundsson, P. A. R. Ade, M. Amiri, S. J. Benton, R. Bihary, J. J. Bock, J. R. Bond, J. A. Bonetti, S. A. Bryan, H. C. Chiang, C. R. Contaldi, B. P. Crill, D. O'Dea, M. Farhang, J. P. Filippini, L. M. Fissel, N. N. Gandilo, S. R. Golwala, M. Halpern, M. Hasselfield, K. R. Helson, G. Hilton, W. Holmes, V. V. Hristov, K. D. Irwin , et al. (18 additional authors not shown)

Abstract: We describe the cryogenic system for SPIDER, a balloon-borne microwave polarimeter that will map 8% of the sky with degree-scale angular resolution. The system consists of a 1284 L liquid helium cryostat and a 16 L capillary-filled superfluid helium tank, which provide base operating temperatures of 4 K and 1.5 K, respectively. Closed-cycle helium-3 adsorption refrigerators supply sub-Kelvin cooli… ▽ More We describe the cryogenic system for SPIDER, a balloon-borne microwave polarimeter that will map 8% of the sky with degree-scale angular resolution. The system consists of a 1284 L liquid helium cryostat and a 16 L capillary-filled superfluid helium tank, which provide base operating temperatures of 4 K and 1.5 K, respectively. Closed-cycle helium-3 adsorption refrigerators supply sub-Kelvin cooling power to multiple focal planes, which are housed in monochromatic telescope inserts. The main helium tank is suspended inside the vacuum vessel with thermally insulating fiberglass flexures, and shielded from thermal radiation by a combination of two vapor cooled shields and multi-layer insulation. This system allows for an extremely low instrumental background and a hold time in excess of 25 days. The total mass of the cryogenic system, including cryogens, is approximately 1000 kg. This enables conventional long duration balloon flights. We will discuss the design, thermal analysis, and qualification of the cryogenic system. △ Less

Submitted 13 June, 2011; originally announced June 2011.

Comments: 11 pages, 4 figures; as published in the conference proceedings for SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy V (2010)

Journal ref: Proceedings of the SPIE, Volume 7741, pp. 77411M-77411M-11 (2010)

Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter

Authors: The CMS Electromagnetic Calorimeter Group, P. Adzic, N. Almeida, D. Andelin, I. Anicin, Z. Antunovic, R. Arcidiacono, M. W. Arenton, E. Auffray, S. Argiro, A. Askew, S. Baccaro, S. Baffioni, M. Balazs, D. Bandurin, D. Barney, L. M. Barone, A. Bartoloni, C. Baty, S. Beauceron, K. W. Bell, C. Bernet, M. Besancon, B. Betev, R. Beuselinck , et al. (245 additional authors not shown)

Abstract: Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews t… ▽ More Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews the related scientific and technological problems encountered. △ Less

Submitted 21 December, 2009; originally announced December 2009.

Comments: 24 pages, 19 figures, available on CMS information server at http://cms.cern.ch/iCMS/

Report number: CMS Note 2009/016

Journal ref: JINST 5:P03010,2010

Gravity waves over topographical bottoms: Comparison with the experiment

Authors: Meng-Jie Huang, Chao-Hsien Kuo, Zhen Ye

Abstract: In this paper, the propagation of water surface waves over one-dimensional periodic and random bottoms is investigated by the transfer matrix method. For the periodic bottoms, the band structure is calculated, and the results are compared to the transmission results. When the bottoms are randomized, the Anderson localization phenomenon is observed. The theory has been applied to an existing expe… ▽ More In this paper, the propagation of water surface waves over one-dimensional periodic and random bottoms is investigated by the transfer matrix method. For the periodic bottoms, the band structure is calculated, and the results are compared to the transmission results. When the bottoms are randomized, the Anderson localization phenomenon is observed. The theory has been applied to an existing experiment (Belzons, et al., J. Fluid Mech. {\bf 186}, 530 (1988)). In general, the results are compared favorably with the experimental observation. △ Less

Submitted 22 June, 2004; originally announced June 2004.

Comments: 15 pages, 7 figures