Showing 1–33 of 33 results for author: Krauss, F

High efficiency glass-based VUV metasurfaces

Authors: Augusto Martins, Taylor Contreras, Chris Stanford, Mirald Tuzi, Justo M. Albo, Carlos O. Escobar, Adam Para, Alexander Kish, Joon-Suh Park, Thomas F. Krauss, Roxanne Guenette

Abstract: Most advances in metaoptics have been made at visible wavelengths and above; in contrast, the vacuum ultraviolet (VUV) has barely been explored despite numerous scientific and technological opportunities. Creating metaoptic elements at this short wavelength is challenging due to the scarcity of VUV transparent materials and the small sizes of the required nanostructures. Here, we present the first… ▽ More Most advances in metaoptics have been made at visible wavelengths and above; in contrast, the vacuum ultraviolet (VUV) has barely been explored despite numerous scientific and technological opportunities. Creating metaoptic elements at this short wavelength is challenging due to the scarcity of VUV transparent materials and the small sizes of the required nanostructures. Here, we present the first transmissive VUV (175 nm) metalens. By using UV-grade silica and trading-off the Nyquist requirement for subwavelength structures against feasibility of the fabrication process, we achieve a step-change in diffraction efficiencies for wavelengths shorter than 300 nm. Our large numerical aperture (NA = 0.5) metalens shows an average diffraction efficiency of (53.3 +- 1.4)%. This demonstration opens up new avenues for compact flat optic systems operating in the VUV range. △ Less

Submitted 20 January, 2024; originally announced January 2024.

Fano resonance-assisted all-dielectric array for enhanced near-field optical trap** of nanoparticles

Authors: Donato Conteduca, Saba N. Khan, Manuel A. Martínez Ruiz, Graham D. Bruce, Thomas F. Krauss, Kishan Dholakia

Abstract: Near-field optics can overcome the diffraction limit by creating strong optical gradients to enable the trap** of nanoparticles. However, it remains challenging to achieve efficient stable trap** without heating and thermal effects. Dielectric structures have been used to address this issue, but they usually offer weak trap stiffness. In this work, we exploit the Fano resonance effect in an al… ▽ More Near-field optics can overcome the diffraction limit by creating strong optical gradients to enable the trap** of nanoparticles. However, it remains challenging to achieve efficient stable trap** without heating and thermal effects. Dielectric structures have been used to address this issue, but they usually offer weak trap stiffness. In this work, we exploit the Fano resonance effect in an all-dielectric quadrupole nanostructure to realize a twenty-fold enhancement of trap stiffness, compared to the off-resonance case. This enables a high effective trap stiffness of $1.19$ fN/nm for 100 nm diameter polystyrene nanoparticles with 3.5 mW/$μ$m$^{2}$ illumination. Furthermore, we demonstrate the capability of the structure to simultaneously trap two particles at distinct locations within the nanostructure array. △ Less

Submitted 7 August, 2023; originally announced August 2023.

Comments: 18 pages, 5 figures

Comprehensive evidence of lasing from a 2D material enabled by a dual-resonance metasurface

Authors: Isabel Barth, Manuel Deckart, Donato Conteduca, Guilherme S Arruda, Zeki Hayran, Sergej Pasko, Simonas Krotkus, Michael Heuken, Francesco Monticone, Thomas F Krauss, Emiliano R Martins, Yue Wang

Abstract: Semiconducting transition metal dichalcogenides (TMDs) have gained significant attention as a gain medium for nanolasers, owing to their unique ability to be easily placed and stacked on virtually any substrate. However, the atomically thin nature of the active material in existing TMD nanolasers presents a challenge, as their limited output power makes it difficult to distinguish between true las… ▽ More Semiconducting transition metal dichalcogenides (TMDs) have gained significant attention as a gain medium for nanolasers, owing to their unique ability to be easily placed and stacked on virtually any substrate. However, the atomically thin nature of the active material in existing TMD nanolasers presents a challenge, as their limited output power makes it difficult to distinguish between true laser operation and other "laser-like" phenomena. Here, we present comprehensive evidence of lasing from a CVD-grown tungsten disulphide (WS$_2$) monolayer. The monolayer is placed on a dual-resonance dielectric metasurface with a rectangular lattice designed to enhance both absorption and emission; resulting in an ultralow threshold operation (threshold <1 W/cm$^2$). We provide a thorough study of the laser performance at room temperature, paying special attention to directionality, output power, and spatial coherence. Notably, our lasers demonstrated a coherence length of over 30 $μ$m, which is several times greater than what has been reported for 2D material lasers so far. Our realisation of a single-mode laser from a wafer-scale CVD-grown monolayer presents exciting opportunities for integration and the development of novel applications. △ Less

Submitted 20 June, 2023; originally announced June 2023.

A Mixed-Method Approach to Determining Contact Matrices in the Cox's Bazar Refugee Settlement

Authors: Joseph Walker, Joseph Aylett-Bullock, Difu Shi, Allen Gidraf Kahindo Maina, Egmond Samir Evers, Sandra Harlass, Frank Krauss

Abstract: Contact matrices are an important ingredient in age-structured epidemic models to inform the simulated spread of the disease between sub-groups of the population. These matrices are generally derived using resource-intensive diary-based surveys and few exist in the Global South or tailored to vulnerable populations. In particular, no contact matrices exist for refugee settlements - locations under… ▽ More Contact matrices are an important ingredient in age-structured epidemic models to inform the simulated spread of the disease between sub-groups of the population. These matrices are generally derived using resource-intensive diary-based surveys and few exist in the Global South or tailored to vulnerable populations. In particular, no contact matrices exist for refugee settlements - locations under-served by epidemic models in general. In this paper we present a novel, mixed-method approach, for deriving contact matrices in populations which combines a lightweight, rapidly deployable, survey with an agent-based model of the population informed by census and behavioural data. We use this method to derive the first set of contact matrices for the Cox's Bazar refugee settlement in Bangladesh. The matrices from the refugee settlement show strong banding effects due to different age cut-offs in attendance at certain venues, such as distribution centres and religious sites, as well as the important contribution of the demographic profile of the settlement which was encoded in the model. These can have significant implications to the modelled disease dynamics. To validate our approach, we also apply our method to the population of the UK and compare our derived matrices against well-known contact matrices previously collected using traditional approaches. Overall, our findings demonstrate that our mixed-method approach can address some of the challenges of both the traditional and previously proposed agent-based approaches to deriving contact matrices, and has the potential to be rolled-out in other resource-constrained environments. This work therefore contributes to a broader aim of develo** new methods and mechanisms of data collection for modelling disease spread in refugee and IDP settlements and better serving these vulnerable communities. △ Less

Submitted 22 November, 2022; originally announced December 2022.

Comments: 31 pages with appendices, 18 figures

Understanding the impact of heavy ions and tailoring the optical properties of large-area Monolayer WS2 using Focused Ion Beam

Authors: Fahrettin Sarcan, Nicola J. Fairbairn, Panaiot Zotev, Toby Severs-Millard, Daniel Gillard, Xiaochen Wang, Ben Conran, Michael Heuken, Ayse Erol, Alexander I. Tartakovskii, Thomas F. Krauss, Gordon J. Hedley, Yue Wang

Abstract: Focused ion beam (FIB) has been used as an effective tool for precise nanoscale fabrication. It has recently been employed to tailor defect engineering in functional nanomaterials such as two-dimensional transition metal dichalcogenides (TMDCs), providing desirable properties in TMDC-based optoelectronic devices. However, the damage caused by the FIB irradiation and milling process to these delica… ▽ More Focused ion beam (FIB) has been used as an effective tool for precise nanoscale fabrication. It has recently been employed to tailor defect engineering in functional nanomaterials such as two-dimensional transition metal dichalcogenides (TMDCs), providing desirable properties in TMDC-based optoelectronic devices. However, the damage caused by the FIB irradiation and milling process to these delicate atomically thin materials, especially in the extended area, has not yet been elaboratively characterised. Understanding the correlation between lateral ion beam effects and optical properties of 2D TMDCs is crucial in designing and fabricating high-performance optoelectronic devices. In this work, we investigate lateral damage in large-area monolayer WS2 caused by the gallium focused ion beam milling process. Three distinct zones away from the milling location are identified and characterised via steady-state photoluminescence (PL) and Raman spectroscopy. An unexpected bright ring-shaped emission around the milled location has been revealed by time-resolved PL spectroscopy with high spatial resolution. Our finding opens new avenues for tailoring the optical properties of TMDCs by charge and defect engineering via focused ion beam lithography. Furthermore, our study provides evidence that while some localised damage is inevitable, distant destruction can be eliminated by reducing the ion beam current. It paves the way for the use of FIB to create nanostructures in 2D TMDCs, as well as the design and realisation of optoelectrical devices on a wafer scale. △ Less

Submitted 9 October, 2022; originally announced October 2022.

Van der Waals Materials for Applications in Nanophotonics

Authors: Panaiot G. Zotev, Yue Wang, Daniel Andres-Penares, Toby Severs Millard, Sam Randerson, Xuerong Hu, Luca Sortino, Charalambos Louca, Mauro Brotons-Gisbert, Tahiyat Huq, Stefano Vezzoli, Riccardo Sapienza, Thomas F. Krauss, Brian Gerardot, Alexander I. Tartakovskii

Abstract: Numerous optical phenomena and applications have been enabled by nanophotonic structures. Their current fabrication from high refractive index dielectrics, such as silicon or gallium phosphide, pose restricting fabrication challenges, while metals, relying on plasmons and thus exhibiting high ohmic losses, limit the achievable applications. Here, we present an emerging class of layered so-called v… ▽ More Numerous optical phenomena and applications have been enabled by nanophotonic structures. Their current fabrication from high refractive index dielectrics, such as silicon or gallium phosphide, pose restricting fabrication challenges, while metals, relying on plasmons and thus exhibiting high ohmic losses, limit the achievable applications. Here, we present an emerging class of layered so-called van der Waals (vdW) crystals as a viable nanophotonics platform. We extract the dielectric response of 11 mechanically exfoliated thin-film (20-200 nm) van der Waals crystals, revealing high refractive indices up to n = 5, pronounced birefringence up to $Δ$n = 3, sharp absorption resonances, and a range of transparency windows from ultraviolet to near-infrared. We then fabricate nanoantennas on SiO$_2$ and gold utilizing the compatibility of vdW thin films with a variety of substrates. We observe pronounced Mie resonances due to the high refractive index contrast on SiO$_2$ leading to a strong exciton-photon coupling regime as well as largely unexplored high-quality-factor, hybrid Mie-plasmon modes on gold. We demonstrate further vdW-material-specific degrees of freedom in fabrication by realizing nanoantennas from stacked twisted crystalline thin-films, enabling control of nonlinear optical properties, and post-fabrication nanostructure transfer, important for nano-optics with sensitive materials. △ Less

Submitted 31 October, 2022; v1 submitted 12 August, 2022; originally announced August 2022.

Journal ref: Laser and Photonics Reviews 2023 17(8), 2200957

Correction of aberrations via polarization in single layer metalenses

Authors: Augusto Martins, Kezheng Li, Guilherme S. Arruda, Donato Conteduca, Haowen Liang, Juntao Li, Ben-Hur V. Borges, Thomas F. Krauss, Emiliano R. Martins

Abstract: The correction of multiple aberrations in an optical system requires different optical elements, which increases its cost and complexity. Metasurfaces hold great promise to providing new functionality for miniaturized and low-cost optical systems. A key advantage over their bulk counterparts is the metasurface's ability to respond to the polarization of light, which adds a new degree of freedom to… ▽ More The correction of multiple aberrations in an optical system requires different optical elements, which increases its cost and complexity. Metasurfaces hold great promise to providing new functionality for miniaturized and low-cost optical systems. A key advantage over their bulk counterparts is the metasurface's ability to respond to the polarization of light, which adds a new degree of freedom to the optical design. Here, we show that polarization control enables a form-birefringent metalens to correct for both spherical and off-axis aberrations using a single element only, which is not possible with bulk optics. The metalens encodes two phase profiles onto the same surface, thus allowing switching from high resolution to wide field of view operation. Such ability to obtain both high resolution and wide field of view in a single layer is an important step towards integration of miniaturized optical systems, which may find many applications, e.g., in microscopy and endoscopy. △ Less

Submitted 18 May, 2022; originally announced May 2022.

Journal ref: Adv. Optical Mater. 2022, 10, 2102555

Metalenses with polarization-independent adaptive nano-antennas

Authors: Jianchao Zhang, Haowen Liang, Yong Long, Yongle Zhou, Qian Sun, Qinfei Wu, Xiao Fu, Emiliano R Martins, Thomas F Krauss, Juntao Li, Xue-Hua Wang

Abstract: Metalens research has made major advances in recent years. These advances rely on the simple design principle of arranging meta-atoms in regular arrays to create an arbitrary phase and polarization profile. Unfortunately, the concept of equally spaced meta-atoms reaches its limit for high deflection angles where the deflection efficiency decreases. The efficiency can be increased using nano-antenn… ▽ More Metalens research has made major advances in recent years. These advances rely on the simple design principle of arranging meta-atoms in regular arrays to create an arbitrary phase and polarization profile. Unfortunately, the concept of equally spaced meta-atoms reaches its limit for high deflection angles where the deflection efficiency decreases. The efficiency can be increased using nano-antennas with multiple elements, but their polarization sensitivity hinders their application in metalenses. Here, we show that by designing polarization-insensitive dimer nano-antennas and abandoning the principle of equally spaced unit cells, polarization-independent ultrahigh numerical aperture (NA=1.48) oil-immersion operation with an efficiency of 43% can be demonstrated. This represents a significant improvement on other polarization-independent designs at visible wavelength. We also use this single layer metalens to replace a conventional objective lens and demonstrate the confocal scanning microscopic imaging of a grating with a period of 300 nm at 532 nm operating wavelength. Overall, our results experimentally demonstrate a novel design concept that further improves metalens performance. △ Less

Submitted 24 March, 2022; originally announced March 2022.

The Forward Physics Facility at the High-Luminosity LHC

Authors: Jonathan L. Feng, Felix Kling, Mary Hall Reno, Juan Rojo, Dennis Soldin, Luis A. Anchordoqui, Jamie Boyd, Ahmed Ismail, Lucian Harland-Lang, Kevin J. Kelly, Vishvas Pandey, Sebastian Trojanowski, Yu-Dai Tsai, Jean-Marco Alameddine, Takeshi Araki, Akitaka Ariga, Tomoko Ariga, Kento Asai, Alessandro Bacchetta, Kincso Balazs, Alan J. Barr, Michele Battistin, Jianming Bian, Caterina Bertone, Weidong Bai , et al. (211 additional authors not shown)

Abstract: High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Mod… ▽ More High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Model (SM) processes and search for physics beyond the Standard Model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF's physics potential. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Comments: 429 pages, contribution to Snowmass 2021

Report number: UCI-TR-2022-01, CERN-PBC-Notes-2022-001, FERMILAB-PUB-22-094-ND-SCD-T, INT-PUB-22-006, BONN-TH-2022-04

HL-LHC Computing Review Stage-2, Common Software Projects: Event Generators

Authors: The HSF Physics Event Generator WG, :, Efe Yazgan, Josh McFayden, Andrea Valassi, Simone Amoroso, Enrico Bothmann, Andy Buckley, John Campbell, Gurpreet Singh Chahal, Taylor Childers, Gloria Corti, Rikkert Frederix, Stefano Frixione, Francesco Giuli, Alexander Grohsjean, Stefan Hoeche, Phil Ilten, Frank Krauss, Michal Kreps, David Lange, Leif Lonnblad, Zach Marshall, Olivier Mattelaer, Stephen Mrenna , et al. (14 additional authors not shown)

Abstract: This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group (WG), as an input to the second phase of the LHCC review of High-Luminosity LHC (HL-LHC) computing, which is due to take place in November 2021. It complements previous documents prepared by the WG in the context of the first phase of the LHCC review in 2020, including in particular the WG paper… ▽ More This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group (WG), as an input to the second phase of the LHCC review of High-Luminosity LHC (HL-LHC) computing, which is due to take place in November 2021. It complements previous documents prepared by the WG in the context of the first phase of the LHCC review in 2020, including in particular the WG paper on the specific challenges in Monte Carlo event generator software for HL-LHC, which has since been updated and published, and which we are also submitting to the November 2021 review as an integral part of our contribution. △ Less

Submitted 30 September, 2021; originally announced September 2021.

Comments: 34 pages; editors Efe Yazgan, Josh McFayden and Andrea Valassi

Transition metal dichalcogenide dimer nano-antennas with ultra-small gaps

Authors: Panaiot G. Zotev, Yue Wang, Luca Sortino, Toby Severs Millard, Nic Mullin, Donato Conteduca, Mostafa Shagar, Armando Genco, Jamie K. Hobbs, Thomas F. Krauss, Alexander I. Tartakovskii

Abstract: Transition metal dichalcogenides have emerged as promising materials for nano-photonic resonators due to their large refractive index, low absorption within a large portion of the visible spectrum and compatibility with a wide range of substrates. Here we use these properties to fabricate WS$_2$ double-pillar nano-antennas in a variety of geometries enabled by the anisotropy in the crystal structu… ▽ More Transition metal dichalcogenides have emerged as promising materials for nano-photonic resonators due to their large refractive index, low absorption within a large portion of the visible spectrum and compatibility with a wide range of substrates. Here we use these properties to fabricate WS$_2$ double-pillar nano-antennas in a variety of geometries enabled by the anisotropy in the crystal structure. Using dark field spectroscopy, we reveal multiple Mie resonances, to which we couple WSe$_2$ monolayer photoluminescence and achieve Purcell enhancement and an increased fluorescence by factors up to 240. We introduce post-fabrication atomic force microscope repositioning and rotation of dimer nano-antennas, achieving gaps as small as 10$\pm$5 nm, opening the possibility to a host of potential applications including strong Purcell enhancement of single photon emitters and optical trap**, which we study in simulations. Our findings highlight the advantages of using transition metal dichalcogenides for nano-photonics by exploring new applications enabled by their unique properties. △ Less

Submitted 2 December, 2021; v1 submitted 19 May, 2021; originally announced May 2021.

Journal ref: ACS Nano 2022 16(4), 6493-6505

Attachment and antibiotic response of early-stage biofilms studied using resonant hyperspectral imaging

Authors: Yue Wang, Christopher P. Reardon, Nicholas Read, Stephen Thorpe, Adrian Evans, Neil Todd, Marjan Van Der Woude, Thomas F. Krauss

Abstract: Many bacterial species readily develop biofilms that act as a protective matrix against external challenge, e.g. from antimicrobial treatment. Therefore, biofilms are often responsible for persistent and recurring infections. Established methods for studying biofilms are either destructive or they focus on the biofilm surface. A non-destructive method that is sensitive to the underside of the biof… ▽ More Many bacterial species readily develop biofilms that act as a protective matrix against external challenge, e.g. from antimicrobial treatment. Therefore, biofilms are often responsible for persistent and recurring infections. Established methods for studying biofilms are either destructive or they focus on the biofilm surface. A non-destructive method that is sensitive to the underside of the biofilm is highly desirable, as it allows studying the penetration of antibiotics through the film. Here, we demonstrate that the high surface sensitivity of resonant hyperspectral imaging provides this capability. The method allows us to monitor the early stages of Escherichia coli biofilm formation, cell attachment and microcolony formation, in-situ and in real time. We study the response of the biofilm to a number of different antibiotics and verify our observations using confocal microscopy. Based on this ability to closely monitor the surface-bound cells, resonant hyperspectral imaging gives new insights into the antimicrobial resistance of biofilms. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Comments: 20 pages in main text, and 6 pages in supporting information

HL-LHC Computing Review: Common Tools and Community Software

Authors: HEP Software Foundation, :, Thea Aarrestad, Simone Amoroso, Markus Julian Atkinson, Joshua Bendavid, Tommaso Boccali, Andrea Bocci, Andy Buckley, Matteo Cacciari, Paolo Calafiura, Philippe Canal, Federico Carminati, Taylor Childers, Vitaliano Ciulli, Gloria Corti, Davide Costanzo, Justin Gage Dezoort, Caterina Doglioni, Javier Mauricio Duarte, Agnieszka Dziurda, Peter Elmer, Markus Elsing, V. Daniel Elvira, Giulio Eulisse , et al. (85 additional authors not shown)

Abstract: Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this doc… ▽ More Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this document we address the issues for software that is used in multiple experiments (usually even more widely than ATLAS and CMS) and maintained by teams of developers who are either not linked to a particular experiment or who contribute to common software within the context of their experiment activity. We also give space to general considerations for future software and projects that tackle upcoming challenges, no matter who writes it, which is an area where community convergence on best practice is extremely useful. △ Less

Submitted 31 August, 2020; originally announced August 2020.

Comments: 40 pages contribution to Snowmass 2021

Report number: HSF-DOC-2020-01

Challenges in Monte Carlo event generator software for High-Luminosity LHC

Authors: The HSF Physics Event Generator WG, :, Andrea Valassi, Efe Yazgan, Josh McFayden, Simone Amoroso, Joshua Bendavid, Andy Buckley, Matteo Cacciari, Taylor Childers, Vitaliano Ciulli, Rikkert Frederix, Stefano Frixione, Francesco Giuli, Alexander Grohsjean, Christian Gütschow, Stefan Höche, Walter Hopkins, Philip Ilten, Dmitri Konstantinov, Frank Krauss, Qiang Li, Leif Lönnblad, Fabio Maltoni, Michelangelo Mangano , et al. (16 additional authors not shown)

Abstract: We review the main software and computing challenges for the Monte Carlo physics event generators used by the LHC experiments, in view of the High-Luminosity LHC (HL-LHC) physics programme. This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group as an input to the LHCC review of HL-LHC computing, which has started in May 2020. We review the main software and computing challenges for the Monte Carlo physics event generators used by the LHC experiments, in view of the High-Luminosity LHC (HL-LHC) physics programme. This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group as an input to the LHCC review of HL-LHC computing, which has started in May 2020. △ Less

Submitted 18 February, 2021; v1 submitted 28 April, 2020; originally announced April 2020.

Comments: 20 pages; editors Andrea Valassi, Efe Yazgan and Josh McFayden; addressed additional comments by journal reviewers

Report number: CERN-LPCC-2020-002; FERMILAB-PUB-20-183-SCD-T; MCNET-20-15

Journal ref: Comput Softw Big Sci 5, 12 (2021)

Hybrid plasmonic waveguide coupling of photons from a single molecule

Authors: Samuele Grandi, Michael P. Nielsen, Javier Cambiasso, Sebastien Boissier, Kyle D. Major, Christopher Reardon, Thomas F. Krauss, Rupert F. Oulton, E. A. Hinds, Alex S. Clark

Abstract: We demonstrate the emission of photons from a single molecule into a hybrid gap plasmon waveguide (HGPW). Crystals of anthracene, doped with dibenzoterrylene (DBT), are grown on top of the waveguides. We investigate a single DBT molecule coupled to the plasmonic region of one of the guides, and determine its in-plane orientation, excited state lifetime and saturation intensity. The molecule emits… ▽ More We demonstrate the emission of photons from a single molecule into a hybrid gap plasmon waveguide (HGPW). Crystals of anthracene, doped with dibenzoterrylene (DBT), are grown on top of the waveguides. We investigate a single DBT molecule coupled to the plasmonic region of one of the guides, and determine its in-plane orientation, excited state lifetime and saturation intensity. The molecule emits light into the guide, which is remotely out-coupled by a grating. The second-order auto-correlation and cross-correlation functions show that the emitter is a single molecule and that the light emerging from the grating comes from that molecule. The coupling efficiency is found to be $β_{WG}=11.6(1.5)\%$. This type of structure is promising for building new functionality into quantum-photonic circuits, where localised regions of strong emitter-guide coupling can be interconnected by low-loss dielectric guides. △ Less

Submitted 15 May, 2019; originally announced May 2019.

Comments: 13 page article. Comments welcome

Journal ref: APL Photonics 4, 086101 (2019)

An Ultra-high Numerical Aperture Metalens at Visible Wavelengths

Authors: Haowen Liang, Qiaoling Lin, Xiangsheng Xie, Qian Sun, Yin Wang, Lidan Zhou, Lin Liu, Xiangyang Yu, Jianying Zhou, Thomas F Krauss, Juntao Li

Abstract: We demonstrate a metalens with NA = 0.98 in air, a bandwidth (FWHM) of 274 nm and a focusing efficiency of 67% at 532 nm wavelength, which is close to the transmission performance of a TiO2 metalens. Moreover, and uniquely so, our metalens can be front-immersed into immersion oil and achieve an ultra-high NA of 1.48 experimentally and 1.73 theoretically, thereby demonstrating the highest NA of any… ▽ More We demonstrate a metalens with NA = 0.98 in air, a bandwidth (FWHM) of 274 nm and a focusing efficiency of 67% at 532 nm wavelength, which is close to the transmission performance of a TiO2 metalens. Moreover, and uniquely so, our metalens can be front-immersed into immersion oil and achieve an ultra-high NA of 1.48 experimentally and 1.73 theoretically, thereby demonstrating the highest NA of any metalens in the visible regime reported to the best of our knowledge. △ Less

Submitted 23 April, 2018; originally announced April 2018.

Comments: 22 pages, 7 figures, an original journal paper

1305 nm MoTe2-on-silicon Laser

Authors: Hanlin Fang, ** Liu, Hongji Li, Lidan Zhou, Lin Liu, Juntao Li, Xuehua Wang, Thomas F. Krauss, Yue Wang

Abstract: The missing piece in the jigsaw of silicon photonics is a light source that can be easily incorporated into the standard silicon fabrication process. Recent advances in the development of atomically thin layers of semiconducting transition metal dichalogenides (TMDs), with direct bandgaps in the near-infrared region, have opened up new possibilities for addressing this need. Here, we report a uniq… ▽ More The missing piece in the jigsaw of silicon photonics is a light source that can be easily incorporated into the standard silicon fabrication process. Recent advances in the development of atomically thin layers of semiconducting transition metal dichalogenides (TMDs), with direct bandgaps in the near-infrared region, have opened up new possibilities for addressing this need. Here, we report a unique silicon laser source that employs molybdenum ditelluride (MoTe2) as a gain material in a photonic crystal nanocavity resonator, fabricated in silicon-on-insulator. We demonstrate optically pumped MoTe2-on-silicon devices lasing at 1305 nm, i.e. in the centre of the O-band used in optical communications, operating in the continuous-wave (CW) regime, at room temperature and with a threshold power density as low as 1.5 kW/cm2. This 2D-on-silicon geometry offers the promise of an integrated low-cost electrically pumped nanoscale silicon light source, thereby adding an essential building block to the silicon photonics platform. △ Less

Submitted 4 October, 2017; originally announced October 2017.

Comments: 13 pages, 6 figures, 1 table

Highly effective relativistic free carrier plasma mirror confined within a silicon slow light photonic crystal waveguide

Authors: Mahmoud A. Gaafar, Dirk Jalas, Liam OFaolain, Juntao Li, Thomas F. Krauss, Alexander Yu. Petrov, Manfred Eich

Abstract: Reflection at relativistically moving plasma mirrors is a well-known approach for frequency conversion as an alternative to nonlinear techniques. A key issue with plasma mirrors is the need for a high carrier concentration, of order 10^21 cm^-3, to achieve an appreciable reflectivity. To generate such high carrier concentrations, short laser pulses with extreme power densities of the order >10^15… ▽ More Reflection at relativistically moving plasma mirrors is a well-known approach for frequency conversion as an alternative to nonlinear techniques. A key issue with plasma mirrors is the need for a high carrier concentration, of order 10^21 cm^-3, to achieve an appreciable reflectivity. To generate such high carrier concentrations, short laser pulses with extreme power densities of the order >10^15 W/cm^2 are required. Here, we introduce a novel waveguide-based method for generating relativistically moving plasma mirrors that requires much lower pump powers and much less carrier concentration. Specifically, we achieve an experimental demonstration of 35% reflection for a carrier concentration of 5*10^17/cm^3 generated by a power density of only 1.2*10^9 W/cm^2. Both the plasma mirror and the signal are confined and propagating within a solid state silicon slow light photonic crystal waveguide. This extraordinary effect only becomes possible because we exploit an indirect intraband optical transition in a dispersion engineered slow light waveguide, where the incident light cannot couple to other states beyond the moving front and has to reflect from it. The moving free carrier (FC) plasma mirror is generated by two photon absorption of 6 ps long pump pulse with a peak power of 6.2 W. The reflection was demonstrated by the interaction of a continuous wave (CW) probe wave co-propagating with the relativistic FC plasma mirror inside a 400 micro-meter long slow light waveguide. Upon interaction with the FC plasma mirror, the probe wave packets, which initially propagate slower than the plasma mirror, are bounced and accelerated, finally esca** from the front in forward direction. The forward reflection of the probe wave packets are accompanied by a frequency upshift. The reflection efficiency is estimated for the part of the CW probe interacting with the pump pulse. △ Less

Submitted 13 May, 2017; originally announced May 2017.

Efficient silicon metasurfaces for visible light

Authors: Zhenpeng Zhou, Juntao Li, Rongbin Su, Beimeng Yao, Hanlin Fang, Kezheng Li, Lidan Zhou, ** Liu, Daan Stellinga, Christopher P Reardon, Thomas F Krauss, Xuehua Wang

Abstract: Dielectric metasurfaces require high refractive index contrast materials for optimum performance. This requirement imposes a severe restraint; devices have either been demonstrated at wavelengths of 700nm and above using high-index semiconductors such as silicon, or they use lower index dielectric materials such as TiO$_{2}$ or Si$_{3}$N$_{4}$ and operate in the visible wavelength regime. Here, we… ▽ More Dielectric metasurfaces require high refractive index contrast materials for optimum performance. This requirement imposes a severe restraint; devices have either been demonstrated at wavelengths of 700nm and above using high-index semiconductors such as silicon, or they use lower index dielectric materials such as TiO$_{2}$ or Si$_{3}$N$_{4}$ and operate in the visible wavelength regime. Here, we show that the high refractive index of silicon can be exploited at wavelengths as short as 532 nm by demonstrating a silicon metasurface with a transmission efficiency of 47% at this wavelength. The metasurface consists of a graded array of silicon posts arranged in a square lattice on a quartz substrate. We show full 2π phase control and we experimentally demonstrate polarization-independent beam deflection at 532nm wavelength. The crystalline silicon is placed on a quartz substrate by a bespoke layer transfer technique and we note that an efficiency >70% may be achieved for a further optimized structure in the same material. Our results open a new way for realizing efficient metasurfaces based on silicon in the visible wavelength regime. △ Less

Submitted 20 September, 2016; originally announced September 2016.

Comments: 16 pages, 6 figures, 2 tables

Pure-Quartic Solitons

Authors: Andrea Blanco-Redondo, C. Martijn de Sterke, John E. Sipe, Thomas F. Krauss, Benjamin J. Eggleton, Chad Husko

Abstract: Temporal optical solitons have been the subject of intense research due to their intriguing physics and applications in ultrafast optics and supercontinuum generation. Conventional bright optical solitons result from the interaction of anomalous group-velocity dispersion and self-phase modulation. Here we report the discovery of an entirely new class of bright solitons arising purely from the inte… ▽ More Temporal optical solitons have been the subject of intense research due to their intriguing physics and applications in ultrafast optics and supercontinuum generation. Conventional bright optical solitons result from the interaction of anomalous group-velocity dispersion and self-phase modulation. Here we report the discovery of an entirely new class of bright solitons arising purely from the interaction of negative fourth-order dispersion and self-phase modulation, which can occur even for normal group-velocity dispersion. We provide experimental and numerical evidence of shape-preserving propagation and flat temporal phase for the fundamental pure-quartic soliton and periodically modulated propagation for the higher-order pure-quartic solitons. Using analytic theory, we derive the approximate shape of the fundamental pure-quartic soliton exhibiting excellent agreement with our experimental observations. Our discovery, enabled by the unique dispersion of photonic crystal waveguides, could find applications in communications and ultrafast lasers. △ Less

Submitted 13 August, 2015; originally announced August 2015.

Lower bound for the spatial extent of localized modes in photonic-crystal waveguides with small random imperfections

Authors: Rémi Faggiani, Alexandre Baron, Xiaorun Zang, Loïc Lalouat, Sebastian A. Schulz, Bryan O'Regan, Kevin Vynck, Benoît Cluzel, Frédérique de Fornel, Thomas F. Krauss, Philippe Lalanne

Abstract: Light localization due to random imperfections in periodic media is paramount in photonics research. The group index is known to be a key parameter for localization near photonic band edges, since small group velocities reinforce light interaction with imperfections. Here, we show that the size of the smallest localized mode that is formed at the band edge of a one-dimensional periodic medium is d… ▽ More Light localization due to random imperfections in periodic media is paramount in photonics research. The group index is known to be a key parameter for localization near photonic band edges, since small group velocities reinforce light interaction with imperfections. Here, we show that the size of the smallest localized mode that is formed at the band edge of a one-dimensional periodic medium is driven instead by the effective photon mass, i.e. the flatness of the dispersion curve. Our theoretical prediction is supported by numerical simulations, which reveal that photonic-crystal waveguides can exhibit surprisingly small localized modes, much smaller than those observed in Bragg stacks thanks to their larger effective photon mass. This possibility is demonstrated experimentally with a photonic-crystal waveguide fabricated without any intentional disorder, for which near-field measurements allow us to distinctly observe a wavelength-scale localized mode despite the smallness ($\sim 1/1000$ of a wavelength) of the fabrication imperfections. △ Less

Submitted 1 June, 2016; v1 submitted 13 May, 2015; originally announced May 2015.

Journal ref: Sci. Rep. 6, 27037 (2016)

Optical performance monitoring at 640Gb/s via slow-light in a silicon nanowire

Authors: B. Corcoran, C. Monat, M. Pelusi, C. Grillet, T. P. White, L. O Faolain, T. F. Krauss, B. J. Eggleton, David J. Moss

Abstract: We demonstrate optical performance monitoring of in-band optical signal to noise ratio (OSNR) and residual dispersion, at bit rates of 40Gb/s, 160Gb/s and 640Gb/s, using slow-light enhanced optical third harmonic generation (THG) in a compact (80 micron) dispersion engineered 2D silicon photonic crystal waveguide. We show that there is no intrinsic degradation in the enhancement of the signal proc… ▽ More We demonstrate optical performance monitoring of in-band optical signal to noise ratio (OSNR) and residual dispersion, at bit rates of 40Gb/s, 160Gb/s and 640Gb/s, using slow-light enhanced optical third harmonic generation (THG) in a compact (80 micron) dispersion engineered 2D silicon photonic crystal waveguide. We show that there is no intrinsic degradation in the enhancement of the signal processing at 640 Gb/s relative to that at 40Gb/s, and that this device should operate well above 1Tb/s. This work represents a record 16-fold increase in processing speed for a silicon device, and opens the door for slow light to play a key role in ultra-high bandwidth telecommunications systems. △ Less

Submitted 12 May, 2015; originally announced May 2015.

Comments: 13 pages, 7 figures, 53 references

Journal ref: Optics Express Volume 18, issue (8) pages 7770-7781 (2010)

Ultra-compact optical auto-correlator based on slow-light enhanced third harmonic generation in a silicon photonic crystal waveguide

Authors: Christelle Monat, Christian Grillet, Matthew Collins, Alex Clark, Jochen Schroeder, Chunle Xiong, Juntao Li, Liam O'Faolain, Thomas F. Krauss, Benjamin J. Eggleton, David J. Moss

Abstract: The ability to use coherent light for material science and applications is directly linked to our ability to measure short optical pulses. While free-space optical methods are well-established, achieving this on a chip would offer the greatest benefit in footprint, performance, flexibility and cost, and allow the integration with complementary signal processing devices. A key goal is to achieve op… ▽ More The ability to use coherent light for material science and applications is directly linked to our ability to measure short optical pulses. While free-space optical methods are well-established, achieving this on a chip would offer the greatest benefit in footprint, performance, flexibility and cost, and allow the integration with complementary signal processing devices. A key goal is to achieve operation at sub-Watt peak power levels and on sub-picosecond timescales. Previous integrated demonstrations require either a temporally synchronized reference pulse, an off-chip spectrometer, or long tunable delay lines. We report the first device capable of achieving single-shot time-domain measurements of near-infrared picosecond pulses based on an ultra-compact integrated CMOS compatible device, with the potential to be fully integrated without any external instrumentation. It relies on optical third-harmonic generation in a slow-light silicon waveguide. Our method can also serve as a powerful in-situ diagnostic tool to directly map, at visible wavelengths, the propagation dynamics of near-infrared pulses in photonic crystals. △ Less

Submitted 18 April, 2014; originally announced April 2014.

Comments: 20 pages, 6 figures, 38 references

Journal ref: Nature Communications Volume 5 Article number: 3246, Feb 5, (2014)

Ultrafast reflectivity modulation in AlGaAs/InAlGaAs multiple quantum well photonic crystal waveguides

Authors: A. Z. Garcia-Deniz, P. Murzyn, A. M. Fox, D. O. Kundys, J-P. R. Wells, D. M. Whittaker, M. S. Skolnick, T. F. Krauss, J. S. Roberts

Abstract: We report an ultrafast optical tuning of the reflectivity of AlGaAs/InAlGaAs multiple quantum well photonic crystal waveguides using a reflection geometry, pump-probe technique. We report an ultrafast optical tuning of the reflectivity of AlGaAs/InAlGaAs multiple quantum well photonic crystal waveguides using a reflection geometry, pump-probe technique. △ Less

Submitted 11 February, 2014; originally announced February 2014.

Journal ref: Physical Review B 74, 165327 (2006)

Phase sensitive amplification in silicon photonic crystal waveguides

Authors: Yanbing, Zhang, Chad Husko, Jochen Schroder, Simon Lefrancois, Isabella H. Rey, Thomas F. Krauss, Benjamin J. Eggleton

Abstract: We experimentally demonstrate phase sensitive amplification (PSA) in a silicon photonic crystal waveguide based on pump-degenerate four-wave mixing. An 11 dB phase extinction ratio is obtained in a record compact 196 μm nanophotonic device due to broadband slow-light, in spite of the presence of two-photon absorption and free-carriers. Numerical calculations show good agreement with the experiment… ▽ More We experimentally demonstrate phase sensitive amplification (PSA) in a silicon photonic crystal waveguide based on pump-degenerate four-wave mixing. An 11 dB phase extinction ratio is obtained in a record compact 196 μm nanophotonic device due to broadband slow-light, in spite of the presence of two-photon absorption and free-carriers. Numerical calculations show good agreement with the experimental results. △ Less

Submitted 28 October, 2013; originally announced October 2013.

Multi-photon absorption limits to heralded single photon sources

Authors: Chad A. Husko, Alex S. Clark, Matthew J. Collins, Alfredo De Rossi, Sylvain Combrie, Gaelle Lehoucq, Isabella H. Rey, Thomas F. Krauss, Chunle Xiong, Benjamin J. Eggleton

Abstract: Single photons are of paramount importance to future quantum technologies, including quantum communication and computation. Nonlinear photonic devices using parametric processes offer a straightforward route to generating photons, however additional nonlinear processes may come into play and interfere with these sources. Here we analyse these sources in the presence of multi-photon processes for t… ▽ More Single photons are of paramount importance to future quantum technologies, including quantum communication and computation. Nonlinear photonic devices using parametric processes offer a straightforward route to generating photons, however additional nonlinear processes may come into play and interfere with these sources. Here we analyse these sources in the presence of multi-photon processes for the first time. We conduct experiments in silicon and gallium indium phosphide photonic crystal waveguides which display inherently different nonlinear absorption processes, namely two-photon (TPA) and three-photon absorption (ThPA), respectively. We develop a novel model capturing these diverse effects which is in excellent quantitative agreement with measurements of brightness, coincidence-to-accidental ratio (CAR) and second-order correlation function g(2)(0), showing that TPA imposes an intrinsic limit on heralded single photon sources. We devise a new figure of merit, the quantum utility (QMU), enabling direct comparison and optimisation of single photon sources. △ Less

Submitted 17 July, 2013; originally announced July 2013.

Comments: 6 figures, 12 pages

Journal ref: Sci. Rep. 3, 3087 (2013)

Room temperature all-silicon photonic crystal nanocavity light emitting diode at sub-bandgap wavelengths

Authors: A. Shakoor, R. Lo Savio, P. Cardile, S. L. Portalupi, D. Gerace, K. Welna, S. Boninelli, G. Franzo, F. Priolo, T. F. Krauss, M. Galli, L. O Faolain

Abstract: Silicon is now firmly established as a high performance photonic material. Its only weakness is the lack of a native electrically driven light emitter that operates CW at room temperature, exhibits a narrow linewidth in the technologically important 1300- 1600 nm wavelength window, is small and operates with low power consumption. Here, an electrically pumped all-silicon nano light source around 1… ▽ More Silicon is now firmly established as a high performance photonic material. Its only weakness is the lack of a native electrically driven light emitter that operates CW at room temperature, exhibits a narrow linewidth in the technologically important 1300- 1600 nm wavelength window, is small and operates with low power consumption. Here, an electrically pumped all-silicon nano light source around 1300-1600 nm range is demonstrated at room temperature. Using hydrogen plasma treatment, nano-scale optically active defects are introduced into silicon, which then feed the photonic crystal nanocavity to enahnce the electrically driven emission in a device via Purcell effect. A narrow (Δλ = 0.5 nm) emission line at 1515 nm wavelength with a power density of 0.4 mW/cm2 is observed, which represents the highest spectral power density ever reported from any silicon emitter. A number of possible improvements are also discussed, that make this scheme a very promising light source for optical interconnects and other important silicon photonics applications. △ Less

Submitted 24 June, 2013; originally announced June 2013.

Integrated spatial multiplexing of heralded single photon sources

Authors: Matthew J. Collins, Chunle Xiong, Isabella H. Rey, Trung D. Vo, Jiakun He, Shayan Shahnia, Christopher Reardon, M. J. Steel, Thomas F. Krauss, Alex S. Clark, Benjamin J. Eggleton

Abstract: The non-deterministic nature of photon sources is a key limitation for single photon quantum processors. Spatial multiplexing overcomes this by enhancing the heralded single photon yield without enhancing the output noise. Here the intrinsic statistical limit of an individual source is surpassed by spatially multiplexing two monolithic silicon correlated photon pair sources, demonstrating a 62.4%… ▽ More The non-deterministic nature of photon sources is a key limitation for single photon quantum processors. Spatial multiplexing overcomes this by enhancing the heralded single photon yield without enhancing the output noise. Here the intrinsic statistical limit of an individual source is surpassed by spatially multiplexing two monolithic silicon correlated photon pair sources, demonstrating a 62.4% increase in the heralded single photon output without an increase in unwanted multi-pair generation. We further demonstrate the scalability of this scheme by multiplexing photons generated in two waveguides pumped via an integrated coupler with a 63.1% increase in the heralded photon rate. This demonstration paves the way for a scalable architecture for multiplexing many photon sources in a compact integrated platform and achieving efficient two photon interference, required at the core of optical quantum computing and quantum communication protocols. △ Less

Submitted 30 May, 2013; originally announced May 2013.

Comments: 10 pages, 3 figures, comments welcome

Journal ref: Nature Communications 4, 2582 (2013)

Ultrafast tuneable optical delay line based on indirect photonic transitions

Authors: Daryl M. Beggs, Isabella H. Rey, Tobias Kampfrath, Nir Rotenberg, L. Kuipers, Thomas F. Krauss

Abstract: We introduce the concept of an indirect photonic transition and demonstrate its use in a dynamic delay line to alter the group velocity of an optical pulse. Operating on an ultrafast time scale, we show continuously tuneable delays of up to 20 ps, using a slow light photonic crystal waveguide only 300 $μ$m in length. Our approach is flexible, in that individual pulses in a pulse stream can be cont… ▽ More We introduce the concept of an indirect photonic transition and demonstrate its use in a dynamic delay line to alter the group velocity of an optical pulse. Operating on an ultrafast time scale, we show continuously tuneable delays of up to 20 ps, using a slow light photonic crystal waveguide only 300 $μ$m in length. Our approach is flexible, in that individual pulses in a pulse stream can be controlled independently, which we demonstrate by operating on pulses separated by just 30 ps. The two-step indirect transition is demonstrated here with a 30% conversion efficiency. △ Less

Submitted 28 November, 2012; originally announced November 2012.

Comments: "Copyright (2012) by the American Physical Society."

Journal ref: Phys. Rev. Lett. 108, 213901 (2012)

Ultrafast tilting of the dispersion of a photonic crystal and adiabatic spectral compression of light pulses

Authors: Daryl M. Beggs, Thomas F. Krauss, L. Kuipers, Tobias Kampfrath

Abstract: We demonstrate, by theory and experiment, the ultrafast tilting of the dispersion curve of a photonic-crystal waveguide following the absorption of a femtosecond pump pulse. By sha** the pump-beam cross section with a nanometric shadow mask, different waveguide eigenmodes acquire different spatial overlap with the perturbing pump, leading to a local flattening of the dispersion by up to 11 %. We… ▽ More We demonstrate, by theory and experiment, the ultrafast tilting of the dispersion curve of a photonic-crystal waveguide following the absorption of a femtosecond pump pulse. By sha** the pump-beam cross section with a nanometric shadow mask, different waveguide eigenmodes acquire different spatial overlap with the perturbing pump, leading to a local flattening of the dispersion by up to 11 %. We find that such partial mode perturbation can be used to adiabatically compress the spectrum of a light pulse traveling through the waveguide. △ Less

Submitted 22 November, 2012; originally announced November 2012.

Journal ref: Phys. Rev. Lett. 108, 033902 (2012)

Chaos-assisted, broadband trap** of light in optical resonators

Authors: C. Liu, A. Di Falco, D. Molinari, Y. Khan, B. S. Ooi, T. F. Krauss, A. Fratalocchi

Abstract: Chaos is a phenomenon that occurs in many aspects of contemporary science. In classical dynamics, chaos is defined as a hypersensitivity to initial conditions. The presence of chaos is often unwanted, as it introduces unpredictability, which makes it difficult to predict or explain experimental results. Conversely, we demonstrate here how chaos can be used to enhance the ability of an optical reso… ▽ More Chaos is a phenomenon that occurs in many aspects of contemporary science. In classical dynamics, chaos is defined as a hypersensitivity to initial conditions. The presence of chaos is often unwanted, as it introduces unpredictability, which makes it difficult to predict or explain experimental results. Conversely, we demonstrate here how chaos can be used to enhance the ability of an optical resonator to store energy. We combine analytic theory with ab-initio simulations and experiments in photonic crystal resonators to show that a chaotic resonator can store six times more energy than its classical counterpart of the same volume. We explain the observed increase with the equipartition of energy among all degrees of freedom of the chaotic resonator, i.e. the cavity modes, which is evident from the convergence of their lifetime towards a single value. A compelling illustration of the theory is provided by demonstrating enhanced absorption in deformed polystyrene microspheres. △ Less

Submitted 24 September, 2012; originally announced September 2012.

Comments: 8 pages, 6 figures

Measuring the spatial extent of individual localized photonic states

Authors: Marko Spasenovic, Daryl M. Beggs, Philippe Lalanne, Thomas F. Krauss, L., Kuipers

Abstract: We measure the spatial extent of individual localized photonic states in a slow-light photonic crystal waveguide. The size of the states is measured by perturbing each state individually through a local electromagnetic interaction with a near-field probe. We find localized states which are not observed in transmission and show that these states are shorter than the waveguide. We also directly obta… ▽ More We measure the spatial extent of individual localized photonic states in a slow-light photonic crystal waveguide. The size of the states is measured by perturbing each state individually through a local electromagnetic interaction with a near-field probe. We find localized states which are not observed in transmission and show that these states are shorter than the waveguide. We also directly obtain near-field measurements of the participation ratio, from which the size of the states can be derived, in quantitative agreement with the size measured with the perturbation method. △ Less

Submitted 25 November, 2011; originally announced November 2011.

Journal ref: Physical Review B 86, 155153 (2012)

Experimental evidence of guided resonances in photonic crystals with aperiodically-ordered supercells

Authors: Armando Ricciardi, Marco Pisco, Ilaria Gallina, Stefania Campopiano, Vincenzo Galdi, Liam O' Faolain, Thomas F. Krauss, Andrea Cusano

Abstract: We report on the first experimental evidence of guided resonances (GRs) in photonic crystal slabs based on aperiodically-ordered supercells. Using the Ammann-Beenker (quasiperiodic, 8-fold symmetric) tiling geometry, we present our study on the fabrication, experimental characterization, and full-wave numerical simulation of two representative structures (with different filling parameters) operati… ▽ More We report on the first experimental evidence of guided resonances (GRs) in photonic crystal slabs based on aperiodically-ordered supercells. Using the Ammann-Beenker (quasiperiodic, 8-fold symmetric) tiling geometry, we present our study on the fabrication, experimental characterization, and full-wave numerical simulation of two representative structures (with different filling parameters) operating at near-infrared wavelengths (1300-1600 nm). Our results show a fairly good agreement between measurements and numerical predictions, and pave the way for the development of new strategies (based, e.g., on the lattice symmetry breaking) for GR engineering. △ Less

Submitted 28 October, 2010; v1 submitted 20 August, 2010; originally announced August 2010.

Comments: 10 pages, 5 figures (minor revisions)