-
Checking the $^8$Be anomaly with a two-arm electron positron pair spectrometer
Authors:
Tran The Anh,
Tran Dinh Trong,
Attila J. Krasznahorkay,
Attila Krasznahorkay,
József Molnár,
Zoltán Pintye,
Nguyen Ai Viet,
Nguyen The Nghia,
Do Thi Khanh Linh,
Bui Thi Hoa,
Le Xuan Chung,
Nguyen Tuan Anh
Abstract:
We have repeated the experiment performed recently by Krasznahorkay et al., (Phys. Rev. Lett. 116, 042501 (2016)), which may indicate a new particle called X17 in the literature. In order to get a reliable, and independent result, we used a different type of electron-positron pair spectrometer which have a more simple acceptance/efficiency as a function of the correlation angle, but the other cond…
▽ More
We have repeated the experiment performed recently by Krasznahorkay et al., (Phys. Rev. Lett. 116, 042501 (2016)), which may indicate a new particle called X17 in the literature. In order to get a reliable, and independent result, we used a different type of electron-positron pair spectrometer which have a more simple acceptance/efficiency as a function of the correlation angle, but the other conditions of the experiment were very similar to the published ones. We could confirm the presence of the anomaly measured at the E$_x$=18.15 MeV resonance, and also confirm their absence at the E$_x$=17.6 MeV resonance, and at E$_p$= 800 keV off resonance energies.
△ Less
Submitted 19 March, 2024; v1 submitted 21 January, 2024;
originally announced January 2024.
-
Constraints on future analysis metadata systems in High Energy Physics
Authors:
T. J. Khoo,
A. Reinsvold Hall,
N. Skidmore,
S. Alderweireldt,
J. Anders,
C. Burr,
W. Buttinger,
P. David,
L. Gouskos,
L. Gray,
S. Hageboeck,
A. Krasznahorkay,
P. Laycock,
A. Lister,
Z. Marshall,
A. B. Meyer,
T. Novak,
S. Rappoccio,
M. Ritter,
E. Rodrigues,
J. Rumsevicius,
L. Sexton-Kennedy,
N. Smith,
G. A. Stewart,
S. Wertz
Abstract:
In High Energy Physics (HEP), analysis metadata comes in many forms -- from theoretical cross-sections, to calibration corrections, to details about file processing. Correctly applying metadata is a crucial and often time-consuming step in an analysis, but designing analysis metadata systems has historically received little direct attention. Among other considerations, an ideal metadata tool shoul…
▽ More
In High Energy Physics (HEP), analysis metadata comes in many forms -- from theoretical cross-sections, to calibration corrections, to details about file processing. Correctly applying metadata is a crucial and often time-consuming step in an analysis, but designing analysis metadata systems has historically received little direct attention. Among other considerations, an ideal metadata tool should be easy to use by new analysers, should scale to large data volumes and diverse processing paradigms, and should enable future analysis reinterpretation. This document, which is the product of community discussions organised by the HEP Software Foundation, categorises types of metadata by scope and format and gives examples of current metadata solutions. Important design considerations for metadata systems, including sociological factors, analysis preservation efforts, and technical factors, are discussed. A list of best practices and technical requirements for future analysis metadata systems is presented. These best practices could guide the development of a future cross-experimental effort for analysis metadata tools.
△ Less
Submitted 19 May, 2022; v1 submitted 1 March, 2022;
originally announced March 2022.
-
A Common Tracking Software Project
Authors:
Xiaocong Ai,
Corentin Allaire,
Noemi Calace,
Angéla Czirkos,
Irina Ene,
Markus Elsing,
Ralf Farkas,
Louis-Guillaume Gagnon,
Rocky Garg,
Paul Gessinger,
Hadrien Grasland,
Heather M. Gray,
Christian Gumpert,
Julia Hrdinka,
Benjamin Huth,
Moritz Kiehn,
Fabian Klimpel,
Attila Krasznahorkay,
Robert Langenberg,
Charles Leggett,
Joana Niermann,
Joseph D. Osborn,
Andreas Salzburger,
Bastian Schlag,
Lauren Tompkins
, et al. (7 additional authors not shown)
Abstract:
The reconstruction of the trajectories of charged particles, or track reconstruction, is a key computational challenge for particle and nuclear physics experiments. While the tuning of track reconstruction algorithms can depend strongly on details of the detector geometry, the algorithms currently in use by experiments share many common features. At the same time, the intense environment of the Hi…
▽ More
The reconstruction of the trajectories of charged particles, or track reconstruction, is a key computational challenge for particle and nuclear physics experiments. While the tuning of track reconstruction algorithms can depend strongly on details of the detector geometry, the algorithms currently in use by experiments share many common features. At the same time, the intense environment of the High-Luminosity LHC accelerator and other future experiments is expected to put even greater computational stress on track reconstruction software, motivating the development of more performant algorithms. We present here A Common Tracking Software (ACTS) toolkit, which draws on the experience with track reconstruction algorithms in the ATLAS experiment and presents them in an experiment-independent and framework-independent toolkit. It provides a set of high-level track reconstruction tools which are agnostic to the details of the detection technologies and magnetic field configuration and tested for strict thread-safety to support multi-threaded event processing. We discuss the conceptual design and technical implementation of ACTS, selected applications and performance of ACTS, and the lessons learned.
△ Less
Submitted 25 June, 2021;
originally announced June 2021.
-
HL-LHC Computing Review: Common Tools and Community Software
Authors:
HEP Software Foundation,
:,
Thea Aarrestad,
Simone Amoroso,
Markus Julian Atkinson,
Joshua Bendavid,
Tommaso Boccali,
Andrea Bocci,
Andy Buckley,
Matteo Cacciari,
Paolo Calafiura,
Philippe Canal,
Federico Carminati,
Taylor Childers,
Vitaliano Ciulli,
Gloria Corti,
Davide Costanzo,
Justin Gage Dezoort,
Caterina Doglioni,
Javier Mauricio Duarte,
Agnieszka Dziurda,
Peter Elmer,
Markus Elsing,
V. Daniel Elvira,
Giulio Eulisse
, et al. (85 additional authors not shown)
Abstract:
Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this doc…
▽ More
Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this document we address the issues for software that is used in multiple experiments (usually even more widely than ATLAS and CMS) and maintained by teams of developers who are either not linked to a particular experiment or who contribute to common software within the context of their experiment activity. We also give space to general considerations for future software and projects that tackle upcoming challenges, no matter who writes it, which is an area where community convergence on best practice is extremely useful.
△ Less
Submitted 31 August, 2020;
originally announced August 2020.
-
Characterization and Performance of PADME's Cherenkov-Based Small-Angle Calorimeter
Authors:
A. Frankenthal,
J. Alexander,
B. Buonomo,
E. Capitolo,
C. Capoccia,
C. Cesarotti,
R. De Sangro,
C. Di Giulio,
F. Ferrarotto,
L. Foggetta,
G. Georgiev,
P. Gianotti,
M. Hunyadi,
V. Kozhuharov,
A. Krasznahorkay,
E. Leonardi,
G. Organtini,
G. Piperno,
M. Raggi,
C. Rella,
A. Saputi,
I. Sarra,
E. Spiriti,
C. Taruggi,
P. Valente
Abstract:
The PADME experiment, at the Laboratori Nazionali di Frascati (LNF), in Italy, will search for invisible decays of the hypothetical dark photon via the process $e^+e^-\rightarrow γA'$, where the $A'$ escapes detection. The dark photon mass range sensitivity in a first phase will be 1 to 24 MeV. We report here on measurement and simulation studies of the performance of the Small-Angle Calorimeter,…
▽ More
The PADME experiment, at the Laboratori Nazionali di Frascati (LNF), in Italy, will search for invisible decays of the hypothetical dark photon via the process $e^+e^-\rightarrow γA'$, where the $A'$ escapes detection. The dark photon mass range sensitivity in a first phase will be 1 to 24 MeV. We report here on measurement and simulation studies of the performance of the Small-Angle Calorimeter, a component of PADME's detector dedicated to rejecting 2- and 3-gamma backgrounds. The crucial requirement is a timing resolution of less than 200 ps, which is satisfied by the choice of PbF$_2$ crystals and the newly released Hamamatsu R13478UV photomultiplier tubes (PMTs). We find a timing resolution of 81 ps (with double-peak separation resolution of 1.8 ns) and a single-crystal energy resolution of 5.7%/$\sqrt{E}$ with light yield of 2.07 photo-electrons per MeV, using 100 to 400 MeV electrons at the Beam Test Facility of LNF. We also propose the investigation of a two-PMT solution coupled to a single PbF$_2$ crystal for higher-energy applications, which has potentially attractive features.
△ Less
Submitted 22 February, 2019; v1 submitted 27 September, 2018;
originally announced September 2018.
-
A neutron spectrometer for studying giant resonances with (p, n) reactions in inverse kinematics
Authors:
L. Stuhl,
A. Krasznahorkay,
M. Csatlós,
A. Algora,
J. Gulyás,
G. Kalinka,
J. Timár,
N. Kalantar-Nayestanaki,
C. Rigollet,
S. Bagchi,
M. A. Najafi
Abstract:
A neutron spectrometer, the European Low-Energy Neutron Spectrometer (ELENS), has been constructed to study exotic nuclei in inverse-kinematics experiments. The spectrometer, which consists of plastic scintillator bars, can be operated in the neutron energy range of 100 keV to 10 MeV. The neutron energy is determined using the time-of-flight technique, while the position of the neutron detection i…
▽ More
A neutron spectrometer, the European Low-Energy Neutron Spectrometer (ELENS), has been constructed to study exotic nuclei in inverse-kinematics experiments. The spectrometer, which consists of plastic scintillator bars, can be operated in the neutron energy range of 100 keV to 10 MeV. The neutron energy is determined using the time-of-flight technique, while the position of the neutron detection is deduced from the time-difference information from photomultipliers attached to both ends of each bar. A novel wrap** method has been developed for the plastic scintillators. The array has a larger than 25% detection efficiency for neutrons of approximately 500 keV in kinetic energy and an angular resolution of less than 1 degree. Details of the design, construction and experimental tests of the spectrometer will be presented.
△ Less
Submitted 23 October, 2013;
originally announced October 2013.
-
Characterization of Large Volume 3.5 x 8 inches LaBr3:Ce Detectors
Authors:
A. Giaz,
L. Pellegri,
S. Riboldi,
F. Camera,
N. Blasi,
C. Boiano,
A. Bracco,
S. Brambilla,
S. Ceruti,
S. Coelli,
F. C. L. Crespi,
M. Csatlòs,
S. Frega,
J. Gulyàs,
A. Krasznahorkay,
S. Lodetti,
B. Million,
A. Owens,
F. Quarati,
L. Stuhl,
O. Wieland
Abstract:
The properties of large volume cylindrical 3.5 x 8 inches (89 mm x 203 mm) LaBr3:Ce scintillation detectors coupled to the Hamamatsu R10233-100SEL photo-multiplier tube were investigated. These crystals are among the largest ones ever produced and still need to be fully characterized to determine how these detectors can be utilized and in which applications. We tested the detectors using monochrom…
▽ More
The properties of large volume cylindrical 3.5 x 8 inches (89 mm x 203 mm) LaBr3:Ce scintillation detectors coupled to the Hamamatsu R10233-100SEL photo-multiplier tube were investigated. These crystals are among the largest ones ever produced and still need to be fully characterized to determine how these detectors can be utilized and in which applications. We tested the detectors using monochromatic gamma-ray sources and in-beam reactions producing gamma rays up to 22.6 MeV; we acquired PMT signal pulses and calculated detector energy resolution and response linearity as a function of gamma-ray energy. Two different voltage dividers were coupled to the Hamamatsu R10233-100SEL PMT: the Hamamatsu E1198-26, based on straightforward resistive network design, and the LABRVD, specifically designed for our large volume LaBr3:Ce scintillation detectors, which also includes active semiconductor devices. Because of the extremely high light yield of LaBr3:Ce crystals we observed that, depending on the choice of PMT, voltage divider and applied voltage, some significant deviation from the ideally proportional response of the detector and some pulse shape deformation appear. In addition, crystal non-homogeneities and PMT gain drifts affect the (measured) energy resolution especially in case of high-energy gamma rays. We also measured the time resolution of detectors with different sizes (from 1x1 inches up to 3.5x8 inches), correlating the results with both the intrinsic properties of PMTs and GEANT simulations of the scintillation light collection process. The detector absolute full energy efficiency was measured and simulated up to gamma-rays of 30 MeV
△ Less
Submitted 28 August, 2013;
originally announced August 2013.
-
TMVA - Toolkit for Multivariate Data Analysis
Authors:
A. Hoecker,
P. Speckmayer,
J. Stelzer,
J. Therhaag,
E. von Toerne,
H. Voss,
M. Backes,
T. Carli,
O. Cohen,
A. Christov,
D. Dannheim,
K. Danielowski,
S. Henrot-Versille,
M. Jachowski,
K. Kraszewski,
A. Krasznahorkay Jr.,
M. Kruk,
Y. Mahalalel,
R. Ospanov,
X. Prudent,
A. Robert,
D. Schouten,
F. Tegenfeldt,
A. Voigt,
K. Voss
, et al. (2 additional authors not shown)
Abstract:
In high-energy physics, with the search for ever smaller signals in ever larger data sets, it has become essential to extract a maximum of the available information from the data. Multivariate classification methods based on machine learning techniques have become a fundamental ingredient to most analyses. Also the multivariate classifiers themselves have significantly evolved in recent years. S…
▽ More
In high-energy physics, with the search for ever smaller signals in ever larger data sets, it has become essential to extract a maximum of the available information from the data. Multivariate classification methods based on machine learning techniques have become a fundamental ingredient to most analyses. Also the multivariate classifiers themselves have significantly evolved in recent years. Statisticians have found new ways to tune and to combine classifiers to further gain in performance. Integrated into the analysis framework ROOT, TMVA is a toolkit which hosts a large variety of multivariate classification algorithms. Training, testing, performance evaluation and application of all available classifiers is carried out simultaneously via user-friendly interfaces. With version 4, TMVA has been extended to multivariate regression of a real-valued target vector. Regression is invoked through the same user interfaces as classification. TMVA 4 also features more flexible data handling allowing one to arbitrarily form combined MVA methods. A generalised boosting method is the first realisation benefiting from the new framework.
△ Less
Submitted 7 July, 2009; v1 submitted 4 March, 2007;
originally announced March 2007.
