-
Generation of Intense Phase-Stable Femtosecond Hard X-ray Pulse Pairs
Authors:
Yu Zhang,
Thomas Kroll,
Clemens Weninger,
Yurina Michine,
Franklin D. Fuller,
Diling Zhu,
Roberto Alonso-Mori,
Dimosthenis Sokaras,
Alberto Lutman,
Aliaksei Halavanau,
Claudio Pellegrini,
Andrei Benediktovitch,
Makina Yabashi,
Ichiro Inoue,
Yuichi Inubushi,
Taito Osaka,
Jumpei Yamada,
Ganguli Babu,
Devashish Salpekar,
Farheen N. Sayed,
Pulickel M. Ajayan,
Jan Kern,
Junko Yano,
Vittal K. Yachandra,
Hitoki Yoneda
, et al. (2 additional authors not shown)
Abstract:
Coherent nonlinear spectroscopies and imaging in the X-ray domain provide direct insight into the coupled motions of electrons and nuclei with resolution on the electronic length and time scale. The experimental realization of such techniques will strongly benefit from access to intense, coherent pairs of femtosecond X-ray pulses. We have observed phase-stable X-ray pulse pairs containing more tha…
▽ More
Coherent nonlinear spectroscopies and imaging in the X-ray domain provide direct insight into the coupled motions of electrons and nuclei with resolution on the electronic length and time scale. The experimental realization of such techniques will strongly benefit from access to intense, coherent pairs of femtosecond X-ray pulses. We have observed phase-stable X-ray pulse pairs containing more thank 3 x 10e7 photons at 5.9 keV (2.1 Angstrom) with about 1 fs duration and 2-5 fs separation. The highly directional pulse pairs are manifested by interference fringes in the superfluorescent and seeded stimulated manganese K-alpha emission induced by an X-ray free-electron laser. The fringes constitute the time-frequency X-ray analogue of the Young double-slit interference allowing for frequency-domain X-ray measurements with attosecond time resolution.
△ Less
Submitted 14 October, 2021;
originally announced October 2021.
-
The observation of vibrating pear shapes in radon nuclei: update
Authors:
P. A. Butler,
L. P. Gaffney,
P. Spagnoletti,
J. Konki,
M. Scheck,
J. F. Smith,
K. Abrahams,
M. Bowry,
J. Cederkäll,
T. Chupp,
G. De Angelis,
H. De Witte,
P. E. Garrett,
A. Goldkuhle,
C. Henrich,
A. Illana,
K. Johnston,
D. T. Joss,
J. M. Keatings,
N. A. Kelly,
M. Komorowska,
T. Kröll,
M. Lozano,
B. S. Nara Singh,
D. O'Donnell
, et al. (19 additional authors not shown)
Abstract:
There is a large body of evidence that atomic nuclei can undergo octupole distortion and assume the shape of a pear. This phenomenon is important for measurements of electric-dipole moments of atoms, which would indicate CP violation and hence probe physics beyond the standard model of particle physics. Isotopes of both radon and radium have been identified as candidates for such measurements. Her…
▽ More
There is a large body of evidence that atomic nuclei can undergo octupole distortion and assume the shape of a pear. This phenomenon is important for measurements of electric-dipole moments of atoms, which would indicate CP violation and hence probe physics beyond the standard model of particle physics. Isotopes of both radon and radium have been identified as candidates for such measurements. Here, we have observed the low-lying quantum states in $^{224}$Rn and $^{226}$Rn by accelerating beams of these radioactive nuclei. We report here additional states not assigned in our 2019 publication. We show that radon isotopes undergo octupole vibrations but do not possess static pear-shapes in their ground states. We conclude that radon atoms provide less favourable conditions for the enhancement of a measurable atomic electric-dipole moment.
△ Less
Submitted 10 June, 2020; v1 submitted 23 March, 2020;
originally announced March 2020.
-
Commissioning of the CALIFA Barrel Calorimeter of the R$^{3}$B Experiment at FAIR
Authors:
P Cabanelas,
H Alvarez-Pol,
J M Boillos,
E Casarejos,
J Cederkall,
D Cortina,
M Feijoo,
D Galaviz,
E Galiana R Gernhäuser,
P Golubev,
D González,
A-L Hartig,
A Heinz,
H Johansson,
P Klenze,
A Knyazev,
T Kröll,
E Nacher,
J Park,
A Perea,
L Ponnath,
H-B Rhee,
J L Rodríguez-Sánchez,
C Suerder,
O Tengblad
, et al. (1 additional authors not shown)
Abstract:
CALIFA is the high efficiency and energy resolution calorimeter for the R$^{3}$B experiment at FAIR, intended for detecting high energy charged particles and $γ$-rays in inverse kinematics direct reactions. It surrounds the reaction target in a segmented configuration of Barrel and Forward End-Cap pieces. The CALIFA Barrel consists of 1952 detection units made of CsI(Tl) long-shaped scintillator c…
▽ More
CALIFA is the high efficiency and energy resolution calorimeter for the R$^{3}$B experiment at FAIR, intended for detecting high energy charged particles and $γ$-rays in inverse kinematics direct reactions. It surrounds the reaction target in a segmented configuration of Barrel and Forward End-Cap pieces. The CALIFA Barrel consists of 1952 detection units made of CsI(Tl) long-shaped scintillator crystals, and it is being commissioned during the Phase0 experiments at FAIR. The first setup for the CALIFA Barrel commissioning is presented here. Results of detector performance with $γ$-rays are obtained, and show that the system fulfills the design requirements.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
Performance recovery of long CsI(Tl) scintillator crystals with APD-based readout
Authors:
P. Cabanelas,
D. González,
H. Alvarez-Pol,
J. M. Boillos,
E. Casarejos,
J. Cederkall,
D. Cortina,
M. Feijoo,
D. Galaviz,
E. Galiana,
R. Gernhäuser,
P. Golubev,
A. -L. Hartig,
P. Klenze,
A. Knyazev,
T. Kröll,
E. Nácher,
J. Park,
A. Perea,
B. Pietras,
L. Ponnath,
H. -B. Rhee,
J. L. Rodríguez-Sánchez,
C. Suerder,
O. Tengblad
, et al. (1 additional authors not shown)
Abstract:
CALIFA is the high efficiency and energy resolution calorimeter for the R3B experiment at FAIR, intended for detecting high energy light charged particles and gamma rays in scattering experiments, and is being commissioned during the Phase-0 experiments at FAIR, between 2018 and 2020. It surrounds the reaction target in a segmented configuration with 2432 detection units made of long CsI(Tl) finge…
▽ More
CALIFA is the high efficiency and energy resolution calorimeter for the R3B experiment at FAIR, intended for detecting high energy light charged particles and gamma rays in scattering experiments, and is being commissioned during the Phase-0 experiments at FAIR, between 2018 and 2020. It surrounds the reaction target in a segmented configuration with 2432 detection units made of long CsI(Tl) finger-shaped scintillator crystals. CALIFA has a 10 year intended operational lifetime as the R3B calorimeter, necessitating measures to be taken to ensure enduring performance. In this paper we present a systematic study of two groups of 6 different detection units of the CALIFA detector after more than four years of operation. The energy resolution and light output yield are evaluated under different conditions. Tests cover the aging of the first detector units assembled and investigates recovery procedures for degraded detection units. A possible reason for the observed degradation is given, pointing to the crystal-APD coupling.
△ Less
Submitted 27 March, 2020; v1 submitted 3 March, 2020;
originally announced March 2020.
-
Evolution of Octupole Deformation in Radium Nuclei from Coulomb Excitation of Radioactive $^{222}$Ra and $^{228}$Ra Beams
Authors:
P. A. Butler,
L. P. Gaffney,
P. Spagnoletti,
K. Abrahams,
M. Bowry,
J. Cederkäll,
G. De Angelis,
H. De Witte,
P. E. Garrett,
A. Goldkuhle,
C. Henrich,
A. Illana,
K. Johnston,
D. T. Joss,
J. M. Keatings,
N. A. Kelly,
M. Komorowska,
J. Konki,
T. Kröll,
M. Lozano,
B. S. Nara Singh,
D. O'Donnell,
J. Ojala,
R. D. Page,
L. G. Pedersen
, et al. (18 additional authors not shown)
Abstract:
There is sparse direct experimental evidence that atomic nuclei can exhibit stable pear shapes arising from strong octupole correlations. In order to investigate the nature of octupole collectivity in radium isotopes, electric octupole ($E3$) matrix elements have been determined for transitions in $^{222,228}$Ra nuclei using the method of sub-barrier, multi-step Coulomb excitation. Beams of the ra…
▽ More
There is sparse direct experimental evidence that atomic nuclei can exhibit stable pear shapes arising from strong octupole correlations. In order to investigate the nature of octupole collectivity in radium isotopes, electric octupole ($E3$) matrix elements have been determined for transitions in $^{222,228}$Ra nuclei using the method of sub-barrier, multi-step Coulomb excitation. Beams of the radioactive radium isotopes were provided by the HIE-ISOLDE facility at CERN. The observed pattern of $E$3 matrix elements for different nuclear transitions is explained by describing $^{222}$Ra as pear-shaped with stable octupole deformation, while $^{228}$Ra behaves like an octupole vibrator.
△ Less
Submitted 27 January, 2020;
originally announced January 2020.
-
Hammerhead, an ultrahigh resolution ePix camera for wavelength-dispersive spectrometers
Authors:
G. Blaj,
D. Bhogadi,
C. -E. Chang,
D. Doering,
C. J. Kenney,
T. Kroll,
M. Kwiatkowski,
J. Segal,
D. Sokaras,
G. Haller
Abstract:
Wavelength-dispersive spectrometers (WDS) are often used in synchrotron and FEL applications where high energy resolution (in the order of eV) is important. Increasing WDS energy resolution requires increasing spatial resolution of the detectors in the dispersion direction. The common approaches with strip detectors or small pixel detectors are not ideal. We present a novel approach, with a sensor…
▽ More
Wavelength-dispersive spectrometers (WDS) are often used in synchrotron and FEL applications where high energy resolution (in the order of eV) is important. Increasing WDS energy resolution requires increasing spatial resolution of the detectors in the dispersion direction. The common approaches with strip detectors or small pixel detectors are not ideal. We present a novel approach, with a sensor using rectangular pixels with a high aspect ratio (between strips and pixels, further called "strixels"), and strixel redistribution to match the square pixel arrays of typical ASICs while avoiding the considerable effort of redesigning ASICs. This results in a sensor area of 17.4 mm x 77 mm, with a fine pitch of 25 $μ$m in the horizontal direction resulting in 3072 columns and 176 rows. The sensors use ePix100 readout ASICs, leveraging their low noise (43 e$^-$, or 180 eV rms). We present results obtained with a Hammerhead ePix100 camera, showing that the small pitch (25 $μ$m) in the dispersion direction maximizes performance for both high and low photon occupancies, resulting in optimal WDS energy resolution. The low noise level at high photon occupancy allows precise photon counting, while at low occupancy, both the energy and the subpixel position can be reconstructed for every photon, allowing an ultrahigh resolution (in the order of 1 $μ$m) in the dispersion direction and rejection of scattered beam and harmonics. Using strixel sensors with redistribution and flip-chip bonding to standard ePix readout ASICs results in ultrahigh position resolution ($\sim$1 $μ$m) and low noise in WDS applications, leveraging the advantages of hybrid pixel detectors (high production yield, good availability, relatively inexpensive) while minimizing development complexity through sharing the ASIC, hardware, software and DAQ development with existing versions of ePix cameras.
△ Less
Submitted 15 March, 2019;
originally announced March 2019.
-
The SPEDE spectrometer
Authors:
P. Papadakis,
D. M. Cox,
G. G. O'Neill,
M. J. G. Borge,
P. A. Butler,
L. P. Gaffney,
P. T. Greenlees,
R. -D. Herzberg,
A. Illana,
D. T. Joss,
J. Konki,
T. Kröll,
J. Ojala,
R. D. Page,
P. Rahkila,
K. Ranttila,
J. Thornhill,
J. Tuunanen,
P. Van Duppen,
N. Warr,
J. Pakarinen
Abstract:
The electron spectrometer, SPEDE, has been developed and will be employed in conjunction with the Miniball spectrometer at the HIE-ISOLDE facility, CERN. SPEDE allows for direct measurement of internal conversion electrons emitted in-flight, without employing magnetic fields to transport or momentum filter the electrons. Together with the Miniball spectrometer, it enables simultaneous observation…
▽ More
The electron spectrometer, SPEDE, has been developed and will be employed in conjunction with the Miniball spectrometer at the HIE-ISOLDE facility, CERN. SPEDE allows for direct measurement of internal conversion electrons emitted in-flight, without employing magnetic fields to transport or momentum filter the electrons. Together with the Miniball spectrometer, it enables simultaneous observation of γ rays and conversion electrons in Coulomb-excitation experiments using radioactive ion beams.
△ Less
Submitted 21 September, 2017;
originally announced September 2017.
-
Particle identification using clustering algorithms
Authors:
R. Wirth,
E. Fiori,
B. Löher,
D. Savran,
J. Silva,
H. Álvarez Pol,
D. Cortina Gil,
B. Pietras,
T. Bloch,
T. Kröll,
E. Nácher,
Á. Perea,
O. Tengblad,
M. Bendel,
M. Dierigl,
R. Gernhäuser,
T. Le Bleis,
M. Winkel
Abstract:
A method that uses fuzzy clustering algorithms to achieve particle identification based on pulse shape analysis is presented. The fuzzy c-means clustering algorithm is used to compute mean (principal) pulse shapes induced by different particle species in an automatic and unsupervised fashion from a mixed set of data. A discrimination amplitude is proposed using these principal pulse shapes to iden…
▽ More
A method that uses fuzzy clustering algorithms to achieve particle identification based on pulse shape analysis is presented. The fuzzy c-means clustering algorithm is used to compute mean (principal) pulse shapes induced by different particle species in an automatic and unsupervised fashion from a mixed set of data. A discrimination amplitude is proposed using these principal pulse shapes to identify the originating particle species of a detector pulse. Since this method does not make any assumptions about the specific features of the pulse shapes, it is very generic and suitable for multiple types of detectors. The method is applied to discriminate between photon- and proton-induced signals in CsI(Tl) scintillator detectors and the results are compared to the well-known integration method.
△ Less
Submitted 5 April, 2013;
originally announced April 2013.
-
AGATA - Advanced Gamma Tracking Array
Authors:
S. Akkoyun,
A. Algora,
B. Alikhani,
F. Ameil,
G. de Angelis,
L. Arnold,
A. Astier,
A. Ataç,
Y. Aubert,
C. Aufranc,
A. Austin,
S. Aydin,
F. Azaiez,
S. Badoer,
D. L. Balabanski,
D. Barrientos,
G. Baulieu,
R. Baumann,
D. Bazzacco,
F. A. Beck,
T. Beck,
P. Bednarczyk,
M. Bellato,
M. A. Bentley,
G. Benzoni
, et al. (329 additional authors not shown)
Abstract:
The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the…
▽ More
The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realization of gamma-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly-segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterization of the crystals was measured and compared with detector-response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximize its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer.
△ Less
Submitted 17 September, 2012; v1 submitted 24 November, 2011;
originally announced November 2011.