-
Improvement of the perovskite photodiodes performance via advanced interface engineering with polymer dielectric
Authors:
A. P. Morozov,
L. O. Luchnikov,
S. Yu. Yurchuk,
A. R. Ishteev,
P. A. Gostishchev,
S. I. Didenko,
N. S. Saratovsky,
S. S. Kozlov,
D. S. Muratov,
Yu. N. Luponosov,
D. S. Saranin
Abstract:
Halide perovskite-based photodiodes are promising for efficient detection across a broad spectral range. Perovskite absorber thin-films have a microcrystalline morphology, characterized by a high density of surface states and defects at inter-grain interfaces. In this work, we used dielectric-ferroelectric poly(vinylidene-fluoride-trifluoroethylene-P(VDF-TrFE) to modify the bulk interfaces and ele…
▽ More
Halide perovskite-based photodiodes are promising for efficient detection across a broad spectral range. Perovskite absorber thin-films have a microcrystalline morphology, characterized by a high density of surface states and defects at inter-grain interfaces. In this work, we used dielectric-ferroelectric poly(vinylidene-fluoride-trifluoroethylene-P(VDF-TrFE) to modify the bulk interfaces and electron transport junction in p-i-n perovskite photodiodes. Our complex work demonstrates that interface engineering with P(VDF-TrFE) induces significant Fermi level pinning, reducing from 4.85 eV for intrinsic perovskite to 4.28 eV for the configuration with dielectric interlayers. The integration of P(VDF-TrFE) into the perovskite film did not affect the morphology and crystal structure, but significantly changed the charge transport and device performance. IV curve analysis and 2-diode model calculations showed enhanced shunt properties, a decreased non-ideality factor, and reduced saturation dark current. We have shown that the complex introduction of P(VDF-TrFE) into the absorbers bulk and on its surface is essential to reduce the impact of the trap** processes. For P(VDF-TrFE) containing devices, we increased the specific detectivity from 10^11 to 10^12 Jones, expanded the linear dynamic range up to 100 dB, and reduced the equivalent noise power to 10^-13 W*Hz^-0.5. Reducing non-radiative recombination contributions significantly enhanced device performance, improving rise/fall times from 6.3/10.9 us to 4.6/6.5 us. The cut-off frequency (3dB) increased from 64.8 kHz to 74.8 kHz following the introduction of the dielectric. These results provide new insights into the use of organic dielectrics and an improved understanding of trap-states and ion defect compensation for detectors based on perovskite heterostructures.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Tailoring wetting properties of organic hole-transport interlayers for slot-die coated perovskite solar modules
Authors:
T. S. Le,
I. A. Chuykoa,
L. O. Luchnikova,
K. A. Ilicheva,
P. O. Sukhorukova,
D. O. Balakirev,
N. S. Saratovsky,
A. O. Alekseev,
S. S. Kozlov,
D. S. Muratov,
V. V. Voronov,
P. A. Gostishchev,
D. A. Kiselev,
T. S. Ilina,
A. A. Vasilev,
A. Y. Polyakov,
E. A. Svidchenko,
O. A. Maloshitskaya,
Yu. N. Luponosov,
D. S. Saranin
Abstract:
The use of self-assembled monolayers (SAMs) with anchoring groups was considered as an effective approach for interface engineering in perovskite solar cells with metal oxide charge transporting layers. However, the coating of SAM layers in PSMs by means of a slot-die is a challenging process due to the low viscosity of the solutions and the low wettability of the films. In this study, we integrat…
▽ More
The use of self-assembled monolayers (SAMs) with anchoring groups was considered as an effective approach for interface engineering in perovskite solar cells with metal oxide charge transporting layers. However, the coating of SAM layers in PSMs by means of a slot-die is a challenging process due to the low viscosity of the solutions and the low wettability of the films. In this study, we integrate a triphenylamine-based polymer, pTPA-TDP, blended with SAM based on 5-[4-[4-(diphenylamino) phenyl] thiophene-2-carboxylic acid (TPATC), to address the challenges of uniform slot-die coating and interface passivation in large-area modules. We fabricated p-i-n oriented PSMs on 50x50 mm2 substrates (12-sub-cells) with NiO hole transport layer (HTL) and organic interlayers for surface modification. Wetting angle map** demonstrated that ununiform regions of the slot-die coated SAM have hydrophobicity with contact angle values up to 90°, causing fluctuations in absorber thickness and the presence of macro-defects at buried interfaces. The incorporation of the blended interlayer to NiO/perovskite junction homogenized the surface wettability (contact angle=40°) and mitigated lattice strain in the absorber. This enabled the effective use of SAM properties on a large-area surface, improving energy level alignment and enhancing the power conversion efficiency (PCE) of the modules from 13.98% to 15.83% and stability (ISOS-L-2, T80 period) from 500-1000 hours to 1630 hours. Investigation of PSMs upon cooling till -5 °C showed that the PCE increased by +0.19%/°C for samples with NiO HTL, while using SAM and blended interlayers raised the coefficient to ~0.40%/°C due to changes in activation energy and trap contributions to device performance across a wide temperature range.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Sensitivity Enhancement of Third-order Nonlinearity Measurement in THz Frequency Range
Authors:
A. Nabilkova,
A. Ismagilov,
M. Melnik,
M. Zhukova,
M. Guselnikov,
S. Kozlov,
A. Tcypkin
Abstract:
In this article for the first time we applied the eclipse Z-scan technique which is by one order of magnitude more sensitive than the conventional Z-scan technique to measure LiNbO3 crystal nonlinear refractive index in the THz range. The obtained value of LiNbO3 nonlinear refractive index is estimated to be order of 10^-11 cm^2/W which is commensurate with known results. This value correlates wit…
▽ More
In this article for the first time we applied the eclipse Z-scan technique which is by one order of magnitude more sensitive than the conventional Z-scan technique to measure LiNbO3 crystal nonlinear refractive index in the THz range. The obtained value of LiNbO3 nonlinear refractive index is estimated to be order of 10^-11 cm^2/W which is commensurate with known results. This value correlates with the theoretically calculated nonlinear refractive index coefficient of vibrational nature. The influence of thermal nonlinearity on the experimental results can be neglected, since the estimated temperature induced refractive index change equals to 2.6*10^-5, while addition from optical nonlinearity is 2.9*10^-3. The demonstrated heightened sensitivity of eclipse Z-scan allows to hold promise for the properties evaluation of materials exhibiting lower nonlinear refractive indices, thus expanding its applicability in characterizing diverse nonlinear optical materials.
△ Less
Submitted 6 May, 2024;
originally announced May 2024.
-
Determination of Plasma Properties in Liquid Jets Through Time-Resolved Experiments on Third Harmonic Reflection Dynamics
Authors:
S. Hilal,
M. Melnik,
A. Ismagilov,
A. Tsypkin,
S. Kozlov
Abstract:
The study of plasma in liquid jets represents a significant area of research encompassing plasma science, dynamics, and properties. This paper presents experimental studies on plasma formation processes in liquid jets of water, ethanol, and isopropyl based on the dynamics of the third harmonic reflection from the induced plasma surface. The characteristics of plasma formation and its properties co…
▽ More
The study of plasma in liquid jets represents a significant area of research encompassing plasma science, dynamics, and properties. This paper presents experimental studies on plasma formation processes in liquid jets of water, ethanol, and isopropyl based on the dynamics of the third harmonic reflection from the induced plasma surface. The characteristics of plasma formation and its properties concerning the angle of incidence of pump radiation on the jet are described. Through time-resolved experiments, and theoretical estimations using Keldysh theory, plasma properties, including reflectivity, density, and frequency for three different media: water, ethanol, and isopropyl are evaluated. Among the studied liquid jets, the isopropyl one demonstrates the highest values of the characteristics mentioned. These findings hold significant potential for advancing our understanding of plasma-based radiation sources e.g. terahertz generation.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Controlling the water nonlinear refractive index in the THz frequency range via temperature variation
Authors:
Aleksandra Nabilkova,
Azat Ismagilov,
Maksim Melnik,
Anton Tcypkin,
Mikhail Guselnikov,
Sergei Kozlov,
Xi-Cheng Zhang
Abstract:
To create self-controlled radiation photonics systems, it is necessary to have complete information about the nonlinear properties of the materials used. In this paper, the vibrational mechanism of the giant low-inertia cubic nonlinearity of water in the terahertz frequency range is experimentally proven. Its dominance which manifests itself when the temperature of the liquid changes is demonstrat…
▽ More
To create self-controlled radiation photonics systems, it is necessary to have complete information about the nonlinear properties of the materials used. In this paper, the vibrational mechanism of the giant low-inertia cubic nonlinearity of water in the terahertz frequency range is experimentally proven. Its dominance which manifests itself when the temperature of the liquid changes is demonstrated. The measured nonlinear refractive index in the THz frequency range for water jet at temperatures from 14$^{\circ}$C to 21$^{\circ}$C demonstrates a correlation with the theoretical approach, varies from 4 to 10$\cdot$10$^{-10}$ cm$^2$/W and is characterized by a inertial time constant of less than 1 ps.
△ Less
Submitted 31 October, 2022;
originally announced October 2022.
-
Formation of gigahertz pulse train by chirped terahertz pulses interference
Authors:
Xinrui Liu,
Maksim Melnik,
Egor Oparin,
Maria Zhukova,
Joel J. P. C. Rodrigues,
Anton Tcypkin,
Sergei Kozlov
Abstract:
The development of multiplexing information transmission technology in the THz band may accelerate the arrival of the 6G era. In this paper, has demonstrated the feasibility of forming a sequence of subpulses in the temporal domain and the corresponding quasidiscrete spectrum in the THz frequency range. It is shown that despite the fact that the THz pulse has an exponential chirp, there is a "link…
▽ More
The development of multiplexing information transmission technology in the THz band may accelerate the arrival of the 6G era. In this paper, has demonstrated the feasibility of forming a sequence of subpulses in the temporal domain and the corresponding quasidiscrete spectrum in the THz frequency range. It is shown that despite the fact that the THz pulse has an exponential chirp, there is a "linkage relation" between spectrum and temporal structures of the THz pulse train. This fact can be used for encoding information in THz pulses for implementation in 6G communication systems in the future.
△ Less
Submitted 16 October, 2019;
originally announced October 2019.
-
Flat liquid jet as a highly efficient source of terahertz radiation
Authors:
Anton N. Tcypkin,
Evgenia A. Ponomareva,
Sergey E. Putilin,
Semen V. Smirnov,
Sviatoslav A. Shtumpf,
Maksim V. Melnik,
Yiwen E,
Sergei A. Kozlov,
Xi-Cheng Zhang
Abstract:
Polar liquids are strong absorbers of electromagnetic waves in the terahertz range, therefore, historically such liquids have not been considered as good candidates for terahertz sources. However, flowing liquid medium has explicit advantages, such as a higher damage threshold compared to solid-state sources and more efficient ionization process compared to gases. Here we report systematic study o…
▽ More
Polar liquids are strong absorbers of electromagnetic waves in the terahertz range, therefore, historically such liquids have not been considered as good candidates for terahertz sources. However, flowing liquid medium has explicit advantages, such as a higher damage threshold compared to solid-state sources and more efficient ionization process compared to gases. Here we report systematic study of efficient generation of terahertz radiation in flat liquid jets under sub-picosecond single-color optical excitation. We demonstrate how medium parameters such as molecular density, ionization energy and linear absorption contribute to the terahertz emission from the flat liquid jets. Our simulation and experimental measurements reveal that the terahertz energy has quasi-quadratic dependence on the optical excitation pulse energy. Moreover, the optimal pump pulse duration, which depends on the thickness of the jet is theoretically predicted and experimentally confirmed. The obtained optical-to-terahertz energy conversion efficiency is more than 0.05%. It is comparable to the commonly used optical rectification in most of electro-optical crystals and two-color air filamentation. These results, significantly advancing prior research, can be successfully applied to create a new alternative source of terahertz radiation.
△ Less
Submitted 29 March, 2019;
originally announced March 2019.
-
High Kerr nonlinearity of water in THz spectral range
Authors:
A. N. Tcypkin,
M. V. Melnik,
M. O. Zhukova,
I. O. Vorontsova,
S. E. Putilin,
S. A. Kozlov,
X. -C. Zhang
Abstract:
The values of the nonlinear refractive index coefficient for various materials in the terahertz frequency range exceed the ones in both visible and NIR ranges by several orders of magnitude. We report the direct measurement of the nonlinear refractive index coefficient of liquid water by using the Z-scan method with broadband pulsed THz beam. Our experimental result shows that nonlinear refractive…
▽ More
The values of the nonlinear refractive index coefficient for various materials in the terahertz frequency range exceed the ones in both visible and NIR ranges by several orders of magnitude. We report the direct measurement of the nonlinear refractive index coefficient of liquid water by using the Z-scan method with broadband pulsed THz beam. Our experimental result shows that nonlinear refractive index coefficient in water is positive and can be as large as 3.5$\times$10$^{-10}$ cm$^{2}$/W in the THz frequency range, which exceeds the ones for the visible and NIR ranges by 6 orders of magnitude.
△ Less
Submitted 4 February, 2019;
originally announced February 2019.
-
Lipid bilayer mediates ion-channel cooperativity in a model of hair-cell mechanotransduction
Authors:
Francesco Gianoli,
Thomas Risler,
Andrei S. Kozlov
Abstract:
Mechanoelectrical transduction in the inner ear is a biophysical process underlying the senses of hearing and balance. The key players involved in this process are mechanosensitive ion channels. They are located in the stereocilia of hair cells and opened by the tension in specialized molecular springs, the tip links, connecting adjacent stereocilia. When channels open, the tip links relax, reduci…
▽ More
Mechanoelectrical transduction in the inner ear is a biophysical process underlying the senses of hearing and balance. The key players involved in this process are mechanosensitive ion channels. They are located in the stereocilia of hair cells and opened by the tension in specialized molecular springs, the tip links, connecting adjacent stereocilia. When channels open, the tip links relax, reducing the hair-bundle stiffness. This gating compliance makes hair cells especially sensitive to small stimuli. The classical explanation for the gating compliance is that the conformational rearrangement of a single channel directly shortens the tip link. However, to reconcile theoretical models based on this mechanism with experimental data, an unrealistically large structural change of the channel is required. Experimental evidence indicates that each tip link is a dimeric molecule, associated on average with two channels at its lower end. It also indicates that the lipid bilayer modulates channel gating, although it is not clear how. Here, we design and analyze a model of mechanotransduction where each tip link attaches to two channels, mobile within the membrane. Their states and positions are coupled by membrane-mediated elastic forces arising from the interaction between the channels' hydrophobic cores and that of the lipid bilayer. This coupling induces cooperative opening and closing of the channels. The model reproduces the main properties of hair-cell mechanotransduction using only realistic parameters constrained by experimental evidence. This work provides an insight into the fundamental role that membrane-mediated ion-channel cooperativity can play in sensory physiology.
△ Less
Submitted 22 December, 2017;
originally announced December 2017.
-
The twofold diabatization of the KRb $(1\sim 2)^1Π$ complex in the framework of \emph{ab initio} and deperturbation approaches
Authors:
S. V. Kozlov,
E. A. Pazyuk,
A. V. Stolyarov
Abstract:
We performed a diabatization of the mutually perturbed $1^1Π$ and $2^1Π$ states of KRb based on both electronic structure calculation and direct coupled-channel deperturbation analysis of experimental energies. The potential energy curves (PECs) of the diabatic states and their scalar coupling were constructed from the \textit{ab initio} adiabatic PECs by analytically integrating the radial…
▽ More
We performed a diabatization of the mutually perturbed $1^1Π$ and $2^1Π$ states of KRb based on both electronic structure calculation and direct coupled-channel deperturbation analysis of experimental energies. The potential energy curves (PECs) of the diabatic states and their scalar coupling were constructed from the \textit{ab initio} adiabatic PECs by analytically integrating the radial $\langle ψ_1^{ad}|\partial /\partial R|ψ_2^{ad}\rangle$ matrix element obtained by a finite-difference method. The diabatic potentials and electronic coupling function were refined by the least squares fitting of the rovibronic termvalues of the $1^1Π\sim 2^1Π$ complex. The empirical PECs combined with the coupling function as well as the diabatized spin-orbit coupling and transition dipole matrix elements are useful for further deperturbation treatment of both singlet and triplet states manifold.
△ Less
Submitted 31 July, 2016;
originally announced August 2016.
-
Dam** Properties of the Hair Bundle
Authors:
Johannes Baumgart,
Andrei S. Kozlov,
Thomas Risler,
A. James Hudspeth
Abstract:
The viscous liquid surrounding a hair bundle dissipates energy and dampens oscillations, which poses a fundamental physical challenge to the high sensitivity and sharp frequency selectivity of hearing. To identify the mechanical forces at play, we constructed a detailed finite-element model of the hair bundle. Based on data from the hair bundle of the bullfrog's sacculus, this model treats the int…
▽ More
The viscous liquid surrounding a hair bundle dissipates energy and dampens oscillations, which poses a fundamental physical challenge to the high sensitivity and sharp frequency selectivity of hearing. To identify the mechanical forces at play, we constructed a detailed finite-element model of the hair bundle. Based on data from the hair bundle of the bullfrog's sacculus, this model treats the interaction of stereocilia both with the surrounding liquid and with the liquid in the narrow gaps between the individual stereocilia. The investigation revealed that grou** stereocilia in a bundle dramatically reduces the total drag. During hair-bundle deflections, the tip links potentially induce drag by causing small but very dissipative relative motions between stereocilia; this effect is offset by the horizontal top connectors that restrain such relative movements at low frequencies. For higher frequencies the coupling liquid is sufficient to assure that the hair bundle moves as a unit with a low total drag. This work reveals the mechanical characteristics originating from hair-bundle morphology and shows quantitatively how a hair bundle is adapted for sensitive mechanotransduction.
△ Less
Submitted 14 May, 2015;
originally announced May 2015.
-
EPECUR setup for the search of narrow baryon resonances in the pion-proton scattering
Authors:
EPECUR Collaboration,
I. G. Alekseev,
V. A. Andreev,
I. G. Bordyuzhin,
P. E. Budkovsky,
D. A. Fedin,
E. A. Filimonov,
V. V. Golubev,
A. B. Gridnev,
D. V. Kalinkin,
V. P. Kanavets,
L. I. Koroleva,
A. I. Kovalev,
N. G. Kozlenko,
V. S. Kozlov,
A. G. Krivshich,
A. A. Manaenkova,
B. V. Morozov,
V. M. Nesterov,
D. V. Novinsky,
V. V. Ryltsov,
M. E. Sadler,
A. D. Sulimov,
V. V. Sumachev,
D. N. Svirida
, et al. (2 additional authors not shown)
Abstract:
EPECUR experimental setup is aimed at the search of narrow resonant states by precision measurement of differential and total reaction cross sections of pion-nucleon interaction with 1 MeV pion energy steps. In five years passed from the idea of the experiment till the start of the data taking in April of 2009, a new apparatus was build from scratch at the universal beam line 322 of ITEP proton sy…
▽ More
EPECUR experimental setup is aimed at the search of narrow resonant states by precision measurement of differential and total reaction cross sections of pion-nucleon interaction with 1 MeV pion energy steps. In five years passed from the idea of the experiment till the start of the data taking in April of 2009, a new apparatus was build from scratch at the universal beam line 322 of ITEP proton synchrotron U-10. The setup is essentially a non-magnetic spectrometer with a liquid hydrogen target based on the large aperture drift chambers with hexagonal structure. The unique properties of the beam line allow individual pion momentum measurement with the accuracy better than 0.1%. The momentum tagging is done with 1 mm pitch proportional chambers located in the first focus of the beam line. The design of numerous subsystems of the setup is based on modern electronic components including microprocessors and FPGA. All the subsystems are tuned and tested both individually and as parts of the whole working setup. The distributed data acquisition system uses widely spread USB and Ethernet protocols, which allows to achieve high performance and take full advantage of the industrial solutions.
△ Less
Submitted 26 November, 2013;
originally announced November 2013.
-
Relative stereociliary motion in a hair bundle opposes amplification at distortion frequencies
Authors:
Andrei S. Kozlov,
Thomas Risler,
Armin J. Hinterwirth,
A. J. Hudspeth
Abstract:
Direct gating of mechanoelectrical-transduction channels by mechanical force is a basic feature of hair cells that assures fast transduction and underpins the mechanical amplification of acoustic inputs. But the associated nonlinearity - the gating compliance - inevitably distorts signals. Because reducing distortion would make the ear a better detector, we sought mechanisms with that effect. Mimi…
▽ More
Direct gating of mechanoelectrical-transduction channels by mechanical force is a basic feature of hair cells that assures fast transduction and underpins the mechanical amplification of acoustic inputs. But the associated nonlinearity - the gating compliance - inevitably distorts signals. Because reducing distortion would make the ear a better detector, we sought mechanisms with that effect. Mimicking in vivo stimulation, we used stiff probes to displace individual hair bundles at physiological amplitudes and measured the coherence and phase of the relative stereociliary motions with a dual-beam differential interferometer. Although stereocilia moved coherently and in phase at the stimulus frequencies, large phase lags at the frequencies of the internally generated distortion products indicated dissipative relative motions. Tip links engaged these relative modes and decreased the coherence in both stimulated and free hair bundles. These results show that a hair bundle breaks into a highly dissipative serial arrangement of stereocilia at distortion frequencies, precluding their amplification.
△ Less
Submitted 8 March, 2012;
originally announced March 2012.
-
Forces between clustered stereocilia minimize friction in the ear on a subnanometre scale
Authors:
Andrei S. Kozlov,
Johannes Baumgart,
Thomas Risler,
Corstiaen P. C. Versteegh,
A. J. Hudspeth
Abstract:
The detection of sound begins when energy derived from acoustic stimuli deflects the hair bundles atop hair cells. As hair bundles move, the viscous friction between stereocilia and the surrounding liquid poses a fundamental challenge to the ear's high sensitivity and sharp frequency selectivity. Part of the solution to this problem lies in the active process that uses energy for frequency-selecti…
▽ More
The detection of sound begins when energy derived from acoustic stimuli deflects the hair bundles atop hair cells. As hair bundles move, the viscous friction between stereocilia and the surrounding liquid poses a fundamental challenge to the ear's high sensitivity and sharp frequency selectivity. Part of the solution to this problem lies in the active process that uses energy for frequency-selective sound amplification. Here we demonstrate that a complementary part involves the fluid-structure interaction between the liquid within the hair bundle and the stereocilia. Using force measurement on a dynamically scaled model, finite-element analysis, analytical estimation of hydrodynamic forces, stochastic simulation and high-resolution interferometric measurement of hair bundles, we characterize the origin and magnitude of the forces between individual stereocilia during small hair-bundle deflections. We find that the close apposition of stereocilia effectively immobilizes the liquid between them, which reduces the drag and suppresses the relative squeezing but not the sliding mode of stereociliary motion. The obliquely oriented tip links couple the mechanotransduction channels to this least dissipative coherent mode, whereas the elastic horizontal top connectors stabilize the structure, further reducing the drag. As measured from the distortion products associated with channel gating at physiological stimulation amplitudes of tens of nanometres, the balance of forces in a hair bundle permits a relative mode of motion between adjacent stereocilia that encompasses only a fraction of a nanometre. A combination of high-resolution experiments and detailed numerical modelling of fluid-structure interactions reveals the physical principles behind the basic structural features of hair bundles and shows quantitatively how these organelles are adapted to the needs of sensitive mechanotransduction.
△ Less
Submitted 3 January, 2012;
originally announced January 2012.
-
Coherent motion of stereocilia assures the concerted gating of hair-cell transduction channels
Authors:
Andrei S. Kozlov,
Thomas Risler,
A. J. Hudspeth
Abstract:
The hair cell's mechanoreceptive organelle, the hair bundle, is highly sensitive because its transduction channels open over a very narrow range of displacements. The synchronous gating of transduction channels also underlies the active hair-bundle motility that amplifies and tunes responsiveness. The extent to which the gating of independent transduction channels is coordinated depends on how t…
▽ More
The hair cell's mechanoreceptive organelle, the hair bundle, is highly sensitive because its transduction channels open over a very narrow range of displacements. The synchronous gating of transduction channels also underlies the active hair-bundle motility that amplifies and tunes responsiveness. The extent to which the gating of independent transduction channels is coordinated depends on how tightly individual stereocilia are constrained to move as a unit. Using dual-beam interferometry in the bullfrog's sacculus, we found that thermal movements of stereocilia located as far apart as a bundle's opposite edges display high coherence and negligible phase lag. Because the mechanical degrees of freedom of stereocilia are strongly constrained, a force applied anywhere in the hair bundle deflects the structure as a unit. This feature assures the concerted gating of transduction channels that maximizes the sensitivity of mechanoelectrical transduction and enhances the hair bundle's capacity to amplify its inputs.
△ Less
Submitted 16 February, 2009;
originally announced February 2009.
-
Cost Effective Electronics for Proportional and Drift Chambers of 'EPECUR' Experiment
Authors:
EPECUR Collaboration,
I. G. Alekseev,
V. A. Andreev,
P. E. Budkovsky,
E. A. Filimonov,
V. V. Golubev,
V. P. Kanavets,
M. M. Kats,
L. I. Koroleva,
A. I. Kovalev,
N. G. Kozlenko,
V. S. Kozlov,
A. G. Krivshich,
V. V. Kulikov,
B. V. Morozov,
V. M. Nesterov,
D. V. Novinsky,
V. V. Ryltsov,
M. E. Sadler,
V. A. Sakharov,
D. Soboyede,
A. D. Sulimov,
V. V. Sumachev,
D. N. Svirida,
V. Yu. Trautman
, et al. (2 additional authors not shown)
Abstract:
'EPECUR' experiment setup is under construction at the beam line 322 of the ITEP proton synchrotron. The experiment requires several large area drift chambers to provide reasonable acceptance and fine pitch proportional chambers for beam particle tracking with total number of electronic channels of about 7000. New compact and cost effective readout system for these gaseous detectors was designed…
▽ More
'EPECUR' experiment setup is under construction at the beam line 322 of the ITEP proton synchrotron. The experiment requires several large area drift chambers to provide reasonable acceptance and fine pitch proportional chambers for beam particle tracking with total number of electronic channels of about 7000. New compact and cost effective readout system for these gaseous detectors was designed, prototyped and tested in the latest two years based on the modern technologies in analog and digital electronics, as well as in data transfer protocols. Mass production of the proportional chamber electronics is close to the end, while the boards for the drift chambers are manufactured in the amount to equip one 8-plane module. The paper presents the functional description of the whole DAQ system and its main parts together with some of the test results as an illustration of the excellent performance of the system. The appendix contains specific information which may be useful for the system users or code developers.
△ Less
Submitted 9 January, 2007;
originally announced January 2007.
-
Start-to-End Simulations of SASE FEL at the TESLA Test Facility, Phase 1
Authors:
M. Dohlus,
K. Floettmann,
O. S. Kozlov,
T. Limberg,
Ph. Piot,
E. L. Saldin,
E. A. Schneidmiller,
M. V. Yurkov
Abstract:
Phase 1 of the vacuum ultra-violet (VUV) free-electron laser (FEL) at the TESLA Test Facility (TTF) recently concluded operation. It successfully demonstrated the saturation of a SASE FEL in the in the wavelength range of 80-120 nm. We present a posteriori start-to-end numerical simulations of this FEL. These simulations are based on the programs Astra and elegant for the generation and transpor…
▽ More
Phase 1 of the vacuum ultra-violet (VUV) free-electron laser (FEL) at the TESLA Test Facility (TTF) recently concluded operation. It successfully demonstrated the saturation of a SASE FEL in the in the wavelength range of 80-120 nm. We present a posteriori start-to-end numerical simulations of this FEL. These simulations are based on the programs Astra and elegant for the generation and transport of the electron distribution. An independent simulation of the intricate beam dynamics in the magnetic bunch compressor is performed with the program CSRtrack. The SASE FEL process is simulated with the code FAST. From our detailed simulations and the resulting phase space distribution at the undulator entrance, we found that the FEL was driven only by a small fraction (slice) of the electron bunch. This "lasing slice" is located in the head of the bunch, and has a peak current of approximately 3 kA. A strong energy chirp (due to the space charge field after compression) within this slice had a significant influence on the FEL operation. Our study shows that the radiation pulse duration is about 40 fs (FWHM) with a corresponding peak power of 1.5 GW. The simulated FEL properties are compared with various experimental data and found to be in excellent agreement.
△ Less
Submitted 11 December, 2003;
originally announced December 2003.
