-
CMOS-compatible Strain Engineering for High-Performance Monolayer Semiconductor Transistors
Authors:
Marc Jaikissoon,
Çağıl Köroğlu,
Jerry A. Yang,
Kathryn M. Neilson,
Krishna C. Saraswat,
Eric Pop
Abstract:
Strain engineering has played a key role in modern silicon electronics, having been introduced as a mobility booster in the 1990s and commercialized in the early 2000s. Achieving similar advances with two-dimensional (2D) semiconductors in a CMOS (complementary metal oxide semiconductor) compatible manner would radically improve the industrial viability of 2D transistors. Here, we show silicon nit…
▽ More
Strain engineering has played a key role in modern silicon electronics, having been introduced as a mobility booster in the 1990s and commercialized in the early 2000s. Achieving similar advances with two-dimensional (2D) semiconductors in a CMOS (complementary metal oxide semiconductor) compatible manner would radically improve the industrial viability of 2D transistors. Here, we show silicon nitride cap** layers can impart strain to monolayer MoS2 transistors on conventional silicon substrates, enhancing their electrical performance with a low thermal budget (350 °C), CMOS-compatible approach. Strained back-gated and dual-gated MoS2 transistors demonstrate median increases up to 60% and 45% in on-state current, respectively. The greatest improvements are found when both transistor channels and contacts are reduced to ~200 nm, reaching saturation currents of 488 uA/um, higher than any previous reports at such short contact pitch. Simulations reveal that most benefits arise from tensile strain lowering the contact Schottky barriers, and that further reducing device dimensions (including contacts) will continue to offer increased strain and performance improvements.
△ Less
Submitted 29 June, 2024; v1 submitted 15 May, 2024;
originally announced May 2024.
-
Improved Gradual Resistive Switching Range and 1000x On/Off Ratio in HfOx RRAM Achieved with a $Ge_2Sb_2Te_5$ Thermal Barrier
Authors:
Raisul Islam,
Shengjun Qin,
Sanchit Deshmukh,
Zhouchangwan Yu,
Cagil Koroglu,
Asir Intisar Khan,
Kirstin Schauble,
Krishna C. Saraswat,
Eric Pop,
H. -S. Philip Wong
Abstract:
Gradual switching between multiple resistance levels is desirable for analog in-memory computing using resistive random-access memory (RRAM). However, the filamentary switching of $HfO_x$-based conventional RRAM often yields only two stable memory states instead of gradual switching between multiple resistance states. Here, we demonstrate that a thermal barrier of $Ge_2Sb_2Te_5$ (GST) between…
▽ More
Gradual switching between multiple resistance levels is desirable for analog in-memory computing using resistive random-access memory (RRAM). However, the filamentary switching of $HfO_x$-based conventional RRAM often yields only two stable memory states instead of gradual switching between multiple resistance states. Here, we demonstrate that a thermal barrier of $Ge_2Sb_2Te_5$ (GST) between $HfO_x$ and the bottom electrode (TiN) enables wider and weaker filaments, by promoting heat spreading laterally inside the $HfO_x$. Scanning thermal microscopy suggests that $HfO_x+GST$ devices have a wider heating region than control devices with only $HfO_x$, indicating the formation of a wider filament. Such wider filaments can have multiple stable conduction paths, resulting in a memory device with more gradual and linear switching. The thermally-enhanced $HfO_x+GST$ devices also have higher on/off ratio ($>10^3$) than control devices ($<10^2$), and a median set voltage lower by approximately 1 V (~35%), with a corresponding reduction of the switching power. Our $HfO_x+GST$ RRAM shows 2x gradual switching range using fast (~ns) identical pulse trains with amplitude less than 2 V.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
High-Performance Flexible Nanoscale Field-Effect Transistors Based on Transition Metal Dichalcogenides
Authors:
Alwin Daus,
Sam Vaziri,
Victoria Chen,
Cagil Koroglu,
Ryan W. Grady,
Connor S. Bailey,
Hye Ryoung Lee,
Kevin Brenner,
Kirstin Schauble,
Eric Pop
Abstract:
Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) are good candidates for high-performance flexible electronics. However, most demonstrations of such flexible field-effect transistors (FETs) to date have been on the micron scale, not benefitting from the short-channel advantages of 2D-TMDs. Here, we demonstrate flexible monolayer MoS2 FETs with the shortest channels repor…
▽ More
Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) are good candidates for high-performance flexible electronics. However, most demonstrations of such flexible field-effect transistors (FETs) to date have been on the micron scale, not benefitting from the short-channel advantages of 2D-TMDs. Here, we demonstrate flexible monolayer MoS2 FETs with the shortest channels reported to date (down to 50 nm) and remarkably high on-current (up to 470 uA/um at 1 V drain-to-source voltage) which is comparable to flexible graphene or crystalline silicon FETs. This is achieved using a new transfer method wherein contacts are initially patterned on the rigid TMD growth substrate with nanoscale lithography, then coated with a polyimide (PI) film which becomes the flexible substrate after release, with the contacts and TMD. We also apply this transfer process to other TMDs, reporting the first flexible FETs with MoSe2 and record on-current for flexible WSe2 FETs. These achievements push 2D semiconductors closer to a technology for low-power and high-performance flexible electronics.
△ Less
Submitted 5 February, 2021; v1 submitted 8 September, 2020;
originally announced September 2020.
