-
Investigation of the Status of Unit 2 Nuclear Reactor of the Fukushima Daiichi by the Cosmic Muon Radiography
Authors:
Hirofumi Fujii,
Kazuhiko Hara,
Shugo Hashimoto,
Kohei Hayashi,
Hidekazu Kakuno,
Hideyo Kodama,
Gi Meiki,
Masato Mizokami,
Shinya Mizokami,
Kanetada Nagamine,
Kotaro Sato,
Shunsuke Sekita,
Hiroshi Shirai,
Shin-Hong Kim,
Takayuki Sumiyoshi,
Atsuto Suzuki,
Yoshihisa Takada,
Kazuki Takahashi,
Yu Takahashi,
Fumihiko Takasaki,
Daichi Yamada,
Satoru Yamashita
Abstract:
We have investigated the status of the nuclear debris in the Unit-2 Nuclear Reactor of the Fukushima Daiichi Nuclear Power plant by the method called Cosmic Muon Radiography. In this measurement, the muon detector was placed outside of the reactor building as was the case of the measurement for the Unit-1 Reactor. Compared to the previous measurements, the detector was down-sized, which made us po…
▽ More
We have investigated the status of the nuclear debris in the Unit-2 Nuclear Reactor of the Fukushima Daiichi Nuclear Power plant by the method called Cosmic Muon Radiography. In this measurement, the muon detector was placed outside of the reactor building as was the case of the measurement for the Unit-1 Reactor. Compared to the previous measurements, the detector was down-sized, which made us possible to locate it closer to the reactor and to investigate especially the lower part of the fuel loading zone. We identified the inner structures of the reactor such as the containment vessel, pressure vessel and other objects through the thick concrete wall of the reactor building. Furthermore, the observation showed existence of heavy material at the bottom of the pressure vessel, which can be interpreted as the debris of melted nuclear fuel dropped from the loading zone.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
-
Investigation of Unit-1 Nuclear Reactor of the Fukushima Daiichi by Cosmic Muon Radiography
Authors:
Hirofumi Fujii,
Kazuhiko Hara,
Kohei Hayashi,
Hidekazu Kakuno,
Hideyo Kodama,
Kanetada Nagamine,
Kotaro Sato,
Shin-Hong Kim,
Atsuto Suzuki,
Takayuki Sumiyoshi,
Kazuki Takahashi,
Fumihiko Takasaki,
Shuji Tanaka,
Satoru Yamashita
Abstract:
We have investigated the status of the nuclear fuel assemblies in Unit-1 reactor of the Fukushima Daiichi Nuclear Power plant by the method called Cosmic Muon Radiography. In this study, muon tracking detectors were placed outside of the reactor building. We succeeded in identifying the inner structure of the reactor complex such as the reactor containment vessel, pressure vessel, and other struct…
▽ More
We have investigated the status of the nuclear fuel assemblies in Unit-1 reactor of the Fukushima Daiichi Nuclear Power plant by the method called Cosmic Muon Radiography. In this study, muon tracking detectors were placed outside of the reactor building. We succeeded in identifying the inner structure of the reactor complex such as the reactor containment vessel, pressure vessel, and other structures of the reactor building, through the concrete wall of the reactor building. We found that a large amount of fuel assemblies was missing in the original fuel loading zone inside the pressure vessel. It can be naturally interpreted that most of the nuclear fuel was melt and dropped down to the bottom of the pressure vessel or even below.
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
Imaging the Inner Structure of a Nuclear Reactor by Cosmic Muon Radiography
Authors:
Hirofumi Fujii,
Kazuhiko Hara,
Shogo Hashimoto,
Kohei Hayashi,
Fumiaki Ito,
Hidekazu Kakuno,
Hideyo Kodama,
Kanetada Nagamine,
Kazuyuki Sato,
Kotaro Satoh,
Shin-Hong Kim,
Atsuto Suzuki,
Takayuki Sumiyoshi,
Kazuki Takahashi,
Yu Takahashi,
Fumihiko Takasaki,
Shuji Tanaka,
Satoru Yamashita
Abstract:
We studied the inner structure of the nuclear reactor of the Japan Atomic Power Company (JAPC) at Tokai, Japan, by the muon radiography. In this study, muon detectors were placed outside of the reactor building. By detecting cosmic muons penetrating through the wall of the reactor building, we could successfully identify the objects such as the containment vessel, pressure vessel, and other struct…
▽ More
We studied the inner structure of the nuclear reactor of the Japan Atomic Power Company (JAPC) at Tokai, Japan, by the muon radiography. In this study, muon detectors were placed outside of the reactor building. By detecting cosmic muons penetrating through the wall of the reactor building, we could successfully identify the objects such as the containment vessel, pressure vessel, and other structures of the reactor. We also observed a concentration of heavy material which can be attributed to the nuclear fuel assemblies stored in the nuclear fuel storage pool.
△ Less
Submitted 5 February, 2019;
originally announced February 2019.
-
Discovery of a big void in Khufu's Pyramid by observation of cosmic-ray muons
Authors:
Kunihiro Morishima,
Mitsuaki Kuno,
Akira Nishio,
Nobuko Kitagawa,
Yuta Manabe,
Masaki Moto,
Fumihiko Takasaki,
Hirofumi Fujii,
Kotaro Satoh,
Hideyo Kodama,
Kohei Hayashi,
Shigeru Odaka,
Sébastien Procureur,
David Attié,
Simon Bouteille,
Denis Calvet,
Christopher Filosa,
Patrick Magnier,
Irakli Mandjavidze,
Marc Riallot,
Benoit Marini,
Pierre Gable,
Yoshikatsu Date,
Makiko Sugiura,
Yasser Elshayeb
, et al. (9 additional authors not shown)
Abstract:
The Great Pyramid or Khufu's Pyramid was built on the Giza Plateau (Egypt) during the IVth dynasty by the pharaoh Khufu (Cheops), who reigned from 2509 to 2483 BC. Despite being one of the oldest and largest monuments on Earth, there is no consensus about how it was built. To better understand its internal structure, we imaged the pyramid using muons, which are by-products of cosmic rays that are…
▽ More
The Great Pyramid or Khufu's Pyramid was built on the Giza Plateau (Egypt) during the IVth dynasty by the pharaoh Khufu (Cheops), who reigned from 2509 to 2483 BC. Despite being one of the oldest and largest monuments on Earth, there is no consensus about how it was built. To better understand its internal structure, we imaged the pyramid using muons, which are by-products of cosmic rays that are only partially absorbed by stone. The resulting cosmic-ray muon radiography allows us to visualize the known and potentially unknown voids in the pyramid in a non-invasive way. Here we report the discovery of a large void (with a cross section similar to the Grand Gallery and a length of 30 m minimum) above the Grand Gallery, which constitutes the first major inner structure found in the Great Pyramid since the 19th century. This void, named ScanPyramids Big Void, was first observed with nuclear emulsion films installed in the Queen's chamber (University of Nagoya), then confirmed with scintillator hodoscopes set up in the same chamber (KEK) and re-confirmed with gas detectors outside of the pyramid (CEA). This large void has therefore been detected with a high confidence by three different muon detection technologies and three independent analyses. These results constitute a breakthrough for the understanding of Khufu's Pyramid and its internal structure. While there is currently no information about the role of this void, these findings show how modern particle physics can shed new light on the world's archaeological heritage.
△ Less
Submitted 21 November, 2017; v1 submitted 5 November, 2017;
originally announced November 2017.
-
Development of a pipeline CAMAC controller with PC/104-Plus single board computer
Authors:
Y. Yasu,
E. Inoue,
H. Fujii,
Y. Igarashi,
M. Ikeno,
M. Tanaka,
K. Nakayoshi,
H. Kodama,
S. Harada,
H. Kyoo
Abstract:
A pipeline CAMAC controller with PC/104-Plus single board computer has been developed. The architecture of the pipeline CAMAC controller is completely different from that of traditional CAMAC controller. The pipeline CAMAC controller adopted truly pipelined command and data paths from/to computer memory to/from CAMAC. The pipeline method enabled the controller maximum speed of CAMAC, approximate…
▽ More
A pipeline CAMAC controller with PC/104-Plus single board computer has been developed. The architecture of the pipeline CAMAC controller is completely different from that of traditional CAMAC controller. The pipeline CAMAC controller adopted truly pipelined command and data paths from/to computer memory to/from CAMAC. The pipeline method enabled the controller maximum speed of CAMAC, approximately up to 3 MB/sec with 24-bit data. The controller also has a DAQ function such as event numbering for co-existence with other equipment such as VME. Not only the functionality and the performance but also the pipeline architecture and the design concept are described.
△ Less
Submitted 14 July, 2003;
originally announced July 2003.
-
The Data Acquisition System Based on PMC Bus
Authors:
Y. Igarashi,
H. Fujii,
T. Higuchi,
M. Ikeno,
E. Inoue,
R. Itoh,
H. Kodama,
T. Murakami,
Y. Nagasaka,
M. Nakao,
K. Nakayoshi,
M. Saitoh,
S. Shimazaki,
S. Y. Suzuki,
M. Tanaka,
K. Tauchi,
G. Varner,
M. Yamauchi,
Y. Yasu,
T. Katayama,
K. Watanabe,
M. Ishizuka,
S. Onozawa,
C. J. Li
Abstract:
High energy physics experiments in KEK/Japan rush into over KHz trigger stage. Thus, we need a successor of the data acquisition(DAQ) system that replaces the CAMAC or FASTBUS systems. To meet these needs, we have developed a DAQ system which includes a crate, base-board modules, daughter cards for front-end A/D or T/D conversion, and back-end communication cards for data transfer and timing con…
▽ More
High energy physics experiments in KEK/Japan rush into over KHz trigger stage. Thus, we need a successor of the data acquisition(DAQ) system that replaces the CAMAC or FASTBUS systems. To meet these needs, we have developed a DAQ system which includes a crate, base-board modules, daughter cards for front-end A/D or T/D conversion, and back-end communication cards for data transfer and timing control. The size of the crate is for the 9U Euro-cards with the standard VME32 bus and extension connectors for power supply. The base-board comprises of a local bus with the sequencer connected to the front-end daughter cards via event buffering FIFOs, and the standard PMC (PCI mezzanine card) bus to be set a PMC processor unit to reduce data size from the front-end daughter cards. A data transfer module, which is connected to the event building system, and a trigger control unit, which communicates with the central timing controller are installed on the back-end communication card connected to the rear end of the base-board. We describe the design of this DAQ system and evaluate the performance of it.
△ Less
Submitted 30 May, 2003;
originally announced May 2003.