-
Synthesis and scintillation properties of some dense X-ray phosphors
Authors:
C Dujardin,
A. Garcia-Murillo,
C. Pedrini,
C. Madej,
C. Goutaudier,
A. Koch,
A. G. Petrosyan,
M. J. Weber
Abstract:
Many ultra-dense lutetium or gadolinium based compounds doped with Eu 3+ have been prepared. This paper reports on the major scintillation performances of these compounds. One of them (Lu 2 O 3 :Eu) is particularly promising and have been deposited on a screen. Performances of such a screen are presented.
Many ultra-dense lutetium or gadolinium based compounds doped with Eu 3+ have been prepared. This paper reports on the major scintillation performances of these compounds. One of them (Lu 2 O 3 :Eu) is particularly promising and have been deposited on a screen. Performances of such a screen are presented.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Heavily doped zinc oxide with plasma frequencies in the telecommunication wavelength range
Authors:
Alexander Koch,
Hongyan Mei,
Jura Rensberg,
Martin Hafermann,
Jad Salman,
Chenghao Wan,
Raymond Wambold,
Daniel Blaschke,
Heidemarie Schmidt,
Jürgen Salfeld,
Sebastian Geburt,
Mikhail A. Kats,
Carsten Ronning
Abstract:
We demonstrate heavy and hyper do** of ZnO by a combination of gallium (Ga) ion implantation using a focused ion beam (FIB) system and post-implantation laser annealing. Ion implantation allows for the incorporation of impurities with nearly arbitrary concentrations, and the laser-annealing process enables dopant activation close to or beyond the solid-solubility limit of Ga in ZnO. We achieved…
▽ More
We demonstrate heavy and hyper do** of ZnO by a combination of gallium (Ga) ion implantation using a focused ion beam (FIB) system and post-implantation laser annealing. Ion implantation allows for the incorporation of impurities with nearly arbitrary concentrations, and the laser-annealing process enables dopant activation close to or beyond the solid-solubility limit of Ga in ZnO. We achieved heavily doped ZnO:Ga with free-carrier concentrations of ~10^21 cm^(-3), resulting in a plasma wavelength of 1.02 um, which is substantially shorter than the telecommunication wavelength of 1.55 um. Thus, our approach enables the control of the plasma frequency of ZnO from the far infrared down to 1.02 um, providing a promising plasmonic material for applications in this regime.
△ Less
Submitted 31 October, 2022;
originally announced October 2022.
-
Full-Waveform Modeling for Time-of-Flight Measurements based on Arrival Time of Photons
Authors:
Maximilian Fink,
Michael Schardt,
Valentin Baier,
Kun Wang,
Martin Jakobi,
Alexander W. Koch
Abstract:
Modern LiDAR sensors find increasing use in safety-critical applications. Therefore, highly accurate modeling of the system's behavior under demanding environmental conditions is necessary. In this paper, we present a modular structure to accurately simulate the amplified raw detector signal of a direct time-of-flight LiDAR system for coaxial transmitter-receiver optics. Our model describes, a mea…
▽ More
Modern LiDAR sensors find increasing use in safety-critical applications. Therefore, highly accurate modeling of the system's behavior under demanding environmental conditions is necessary. In this paper, we present a modular structure to accurately simulate the amplified raw detector signal of a direct time-of-flight LiDAR system for coaxial transmitter-receiver optics. Our model describes, a measurement system based on standard optical components and a detector able of converting single photons to an electrical signal. To verify the model's predictions, single-point measurements for targets of different reflectivity at defined distances were performed. Statistical analysis shows an R-squared value greater than 0.990 for simulated and measured signal amplitude levels. Noise modeling shows good accordance with the performed measurements for different target irradiance levels. The presented results have a guiding significance in the modeling of the complex signal processing chain of LiDAR systems, as it enables the prediction of key parameters of the system early in the development process. Hence, unnecessary costs by design flaws can be mitigated. The modular structure allows easy adaption for arbitrary LiDAR systems.
△ Less
Submitted 3 August, 2022;
originally announced August 2022.
-
Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing
Authors:
Kun Wang,
Yosuke Mizuno,
Xingchen Dong,
Wolfgang Kurz,
Maximilian Fink,
Heeyoung Lee,
Martin Jakobi,
Alexander W. Koch
Abstract:
A strain-insensitive temperature sensor based on multimode interference using standard multimode fibers (MMFs) is proposed according to the comprehensive study of the characteristics of the MMFs. The temperature and strain dependences on the core diameter, numerical aperture (NA), and the length of the MMF section in the single-mode--multimode--single-mode (SMS) fiber structure are investigated ex…
▽ More
A strain-insensitive temperature sensor based on multimode interference using standard multimode fibers (MMFs) is proposed according to the comprehensive study of the characteristics of the MMFs. The temperature and strain dependences on the core diameter, numerical aperture (NA), and the length of the MMF section in the single-mode--multimode--single-mode (SMS) fiber structure are investigated experimentally. The results indicate that the larger core diameter of the MMF leads to higher temperature sensitivity but lower strain sensitivity (absolute values); the higher NA does not influence the temperature sensitivity but results in higher absolute value of strain sensitivity; the longer MMF section brings lower temperature sensitivity but does not have an impact on strain sensitivity. These findings also contribute to the theoretical analysis of the length dependence in the SMS fiber sensors. Besides, the results of the characterization study show that the strain sensitivity is relatively low, which brings a possibility to develop a strain-insensitive temperature sensor. The proposed sensor is used for temperature sensing while the strain is constantly applied from 0 to 1100 $με$ with steps of 100 $με$. The measured results are consistent with the comprehensive study. The mean temperature sensitivity is 6.14 pm/$^{\circ}$C with a standard deviation of 0.39 pm/$^{\circ}$C, which proves that the proposed temperature sensor exhibits good stability and is insensitive to strain. We expect that these results will provide a profound guideline to fiber sensors based on multimode interference.
△ Less
Submitted 23 April, 2022;
originally announced April 2022.
-
Tuning carrier density and phase transitions in oxide semiconductors using focused ion beams
Authors:
Hongyan Mei,
Alexander Koch,
Chenghao Wan,
Jura Rensberg,
Zhen Zhang,
Jad Salman,
Martin Hafermann,
Maximilian Schaal,
Yuzhe Xiao,
Raymond Wambold,
Shriram Ramanathan,
Carsten Ronning,
Mikhail A. Kats
Abstract:
We demonstrate spatial modification of the optical properties of thin-film metal oxides, zinc oxide and vanadium dioxide as representatives, using a commercial focused ion beam (FIB) system. Using a Ga+ FIB and thermal annealing, we demonstrated variable do** of a band semiconductor, zinc oxide (ZnO), achieving carrier concentrations from 10^18 cm-3 to 10^20 cm-3. Using the same FIB without subs…
▽ More
We demonstrate spatial modification of the optical properties of thin-film metal oxides, zinc oxide and vanadium dioxide as representatives, using a commercial focused ion beam (FIB) system. Using a Ga+ FIB and thermal annealing, we demonstrated variable do** of a band semiconductor, zinc oxide (ZnO), achieving carrier concentrations from 10^18 cm-3 to 10^20 cm-3. Using the same FIB without subsequent thermal annealing, we defect-engineered a correlated semiconductor, vanadium dioxide (VO2), locally modifying its insulator-to-metal transition (IMT) temperature by range of ~25 degrees C. Such area-selective modification of metal oxides by direct writing using a FIB provides a simple, mask-less route to the fabrication of optical structures, especially when multiple or continuous levels of do** or defect density are required.
△ Less
Submitted 2 June, 2022; v1 submitted 3 February, 2022;
originally announced February 2022.
-
Robust and optimal predictive control of the COVID-19 outbreak
Authors:
Johannes Köhler,
Lukas Schwenkel,
Anne Koch,
Julian Berberich,
Patricia Pauli,
Frank Allgöwer
Abstract:
We investigate adaptive strategies to robustly and optimally control the COVID-19 pandemic via social distancing measures based on the example of Germany. Our goal is to minimize the number of fatalities over the course of two years without inducing excessive social costs. We consider a tailored model of the German COVID-19 outbreak with different parameter sets to design and validate our approach…
▽ More
We investigate adaptive strategies to robustly and optimally control the COVID-19 pandemic via social distancing measures based on the example of Germany. Our goal is to minimize the number of fatalities over the course of two years without inducing excessive social costs. We consider a tailored model of the German COVID-19 outbreak with different parameter sets to design and validate our approach. Our analysis reveals that an open-loop optimal control policy can significantly decrease the number of fatalities when compared to simpler policies under the assumption of exact model knowledge. In a more realistic scenario with uncertain data and model mismatch, a feedback strategy that updates the policy weekly using model predictive control (MPC) leads to a reliable performance, even when applied to a validation model with deviant parameters. On top of that, we propose a robust MPC-based feedback policy using interval arithmetic that adapts the social distancing measures cautiously and safely, thus leading to a minimum number of fatalities even if measurements are inaccurate and the infection rates cannot be precisely specified by social distancing. Our theoretical findings support various recent studies by showing that 1) adaptive feedback strategies are required to reliably contain the COVID-19 outbreak, 2) well-designed policies can significantly reduce the number of fatalities compared to simpler ones while kee** the amount of social distancing measures on the same level, and 3) imposing stronger social distancing measures early on is more effective and cheaper in the long run than opening up too soon and restoring stricter measures at a later time.
△ Less
Submitted 8 February, 2021; v1 submitted 7 May, 2020;
originally announced May 2020.
-
Short sighted deep learning
Authors:
Ellen de Melllo Koch,
Anita de Mello Koch,
Nicholas Kastanos,
Ling Cheng
Abstract:
A theory explaining how deep learning works is yet to be developed. Previous work suggests that deep learning performs a coarse graining, similar in spirit to the renormalization group (RG). This idea has been explored in the setting of a local (nearest neighbor interactions) Ising spin lattice. We extend the discussion to the setting of a long range spin lattice. Markov Chain Monte Carlo (MCMC) s…
▽ More
A theory explaining how deep learning works is yet to be developed. Previous work suggests that deep learning performs a coarse graining, similar in spirit to the renormalization group (RG). This idea has been explored in the setting of a local (nearest neighbor interactions) Ising spin lattice. We extend the discussion to the setting of a long range spin lattice. Markov Chain Monte Carlo (MCMC) simulations determine both the critical temperature and scaling dimensions of the system. The model is used to train both a single RBM (restricted Boltzmann machine) network, as well as a stacked RBM network. Following earlier Ising model studies, the trained weights of a single layer RBM network define a flow of lattice models. In contrast to results for nearest neighbor Ising, the RBM flow for the long ranged model does not converge to the correct values for the spin and energy scaling dimension. Further, correlation functions between visible and hidden nodes exhibit key differences between the stacked RBM and RG flows. The stacked RBM flow appears to move towards low temperatures whereas the RG flow moves towards high temperature. This again differs from results obtained for nearest neighbor Ising.
△ Less
Submitted 7 February, 2020;
originally announced February 2020.
-
On orbit performance of the GRACE Follow-On Laser Ranging Interferometer
Authors:
Klaus Abich,
Claus Braxmaier,
Martin Gohlke,
Josep Sanjuan,
Alexander Abramovici,
Brian Bachman Okihiro,
David C. Barr,
Maxime P. Bize,
Michael J. Burke,
Ken C. Clark,
Glenn de Vine,
Jeffrey A. Dickson,
Serge Dubovitsky,
William M. Folkner,
Samuel Francis,
Martin S. Gilbert,
Mark Katsumura,
William Klipstein,
Kameron Larsen,
Carl Christian Liebe,
Jehhal Liu,
Kirk McKenzie,
Phillip R. Morton,
Alexander T. Murray,
Don J. Nguyen
, et al. (58 additional authors not shown)
Abstract:
The Laser Ranging Interferometer (LRI) instrument on the Gravity Recovery and Climate Experiment (GRACE) Follow-On mission has provided the first laser interferometric range measurements between remote spacecraft, separated by approximately 220 km. Autonomous controls that lock the laser frequency to a cavity reference and establish the 5 degree of freedom two-way laser link between remote spacecr…
▽ More
The Laser Ranging Interferometer (LRI) instrument on the Gravity Recovery and Climate Experiment (GRACE) Follow-On mission has provided the first laser interferometric range measurements between remote spacecraft, separated by approximately 220 km. Autonomous controls that lock the laser frequency to a cavity reference and establish the 5 degree of freedom two-way laser link between remote spacecraft succeeded on the first attempt. Active beam pointing based on differential wavefront sensing compensates spacecraft attitude fluctuations. The LRI has operated continuously without breaks in phase tracking for more than 50 days, and has shown biased range measurements similar to the primary ranging instrument based on microwaves, but with much less noise at a level of $1\,{\rm nm}/\sqrt{\rm Hz}$ at Fourier frequencies above 100 mHz.
△ Less
Submitted 28 June, 2019;
originally announced July 2019.
-
How is density compensation created in the ocean mixed layer?
Authors:
Andrey O. Koch,
Robert W. Helber,
James G. Richman,
Charlie N. Barron
Abstract:
This study examines the impact of turbulent mixing on horizontal density compensation in the upper ocean. A series of simulations model the role of mixing in scenarios initialized with geostrophically-adjusted compensated and uncompensated thermohaline gradients. Numerical experiments isolate the influence of mixing on these gradients using idealized conditions with zero surface heat and momentum…
▽ More
This study examines the impact of turbulent mixing on horizontal density compensation in the upper ocean. A series of simulations model the role of mixing in scenarios initialized with geostrophically-adjusted compensated and uncompensated thermohaline gradients. Numerical experiments isolate the influence of mixing on these gradients using idealized conditions with zero surface heat and momentum flux. Prompted by theoretical considerations and observed consequences of mixing, a new non-linear horizontal diffusion scheme is introduced as an alternative to the standard Laplacian diffusion. Results suggest that when horizontal mixing is parameterized using constant diffusivities, horizontal density compensation is substantially unchanged as the gradients erode. Simulations using the new scheme, which parameterizes mixing with horizontal diffusivities scaled by squared buoyancy gradient, suggest that horizontal mixing can produce compensated gradients during this decay, but only at scales of 10 km and less. Reducing vertical mixing to small background values has a similar effect, increasing the degree of compensation at submesoscales. Reproducing observed compensated thermohaline variability in the mixed layer at scales greater than 10 km requires external forcing. These results show important influences of mixing on density compensation within the ageostrophic submesoscale regime. In the transition from a horizontally compensated mixed layer to a partially compensated thermocline, advection must play an important role; mixing alone is insufficient.
△ Less
Submitted 18 June, 2019;
originally announced June 2019.
-
What drives Oregon shelf summer hypoxia?
Authors:
Andrey O. Koch,
Yvette H. Spitz,
Harold P. Batchelder
Abstract:
Using coupled biological-physical model based on NPZD-type biological model and 3D coastal ocean model (ROMS) we studied dissolved oxygen (DO) dynamics and hypoxia development on Oregon shelf during April-August of 2002, 2006, and 2008. We found that shelf hypoxia existed during summer months of all three years. It was characterized by variable severity, horizontal and vertical extent, duration an…
▽ More
Using coupled biological-physical model based on NPZD-type biological model and 3D coastal ocean model (ROMS) we studied dissolved oxygen (DO) dynamics and hypoxia development on Oregon shelf during April-August of 2002, 2006, and 2008. We found that shelf hypoxia existed during summer months of all three years. It was characterized by variable severity, horizontal and vertical extent, duration and timing, and it was more pronounced in 2002 and 2006. By the means of numerical sensitivity analysis we found out that: inadequate initial DO and NO3 conditions in late-spring 2002 prevented or delayed hypoxia development; offshore and especially northern DO and NO3 boundary conditions are important to simulating hypoxia on the Oregon shelf, this was especially critical for early bottom hypoxia on the shelf north of 45N in 2006; hypoxia occurred earlier in the north in 2006 and in the south (Heceta Bank) in 2002, perhaps, due to different northern boundary conditions for these years; the DO and NO3 conditions at western open boundary located some 400 km offshore are unimportant for DO dynamics in spring-summer. Although DO production due to biological processes is large, physical processes, mostly horizontal advection and diffusion, are responsible for net DO reduction in spring-summer and hypoxia onset in summer on the Oregon shelf. The physical mechanism most responsible for Oregon shelf hypoxia is the coastal upwelling. Diffusive fluxes of NO3 and DO are negligible at northern and southern boundaries of the Oregon shelf and appreciable at the western boundary. In 2006, about two thirds of total April-August DO loss happened in April-May as a result of strong and long-lasting upwelling event.
△ Less
Submitted 18 June, 2019;
originally announced June 2019.
-
Direct asymmetry measurement of temperature and density spatial distributions in inertial confinement fusion plasmas from pinhole space-resolved spectra
Authors:
T. Nagayama,
R. C. Mancini,
R. Florido,
D. Mayes,
R. Tommasini,
J. A. Koch,
J. A. Delettrez,
S. P. Regan,
V. A. Smalyuk
Abstract:
Two-dimensional space-resolved temperature and density images of an inertial confinement fusion (ICF) implosion core have been diagnosed for the first time. Argon-doped, direct-drive ICF experiments were performed at the Omega Laser Facility and a collection of two-dimensional space-resolved spectra were obtained from an array of gated, spectrally resolved pinhole images recorded by a multi-monoch…
▽ More
Two-dimensional space-resolved temperature and density images of an inertial confinement fusion (ICF) implosion core have been diagnosed for the first time. Argon-doped, direct-drive ICF experiments were performed at the Omega Laser Facility and a collection of two-dimensional space-resolved spectra were obtained from an array of gated, spectrally resolved pinhole images recorded by a multi-monochromatic x-ray imager. Detailed spectral analysis revealed asymmetries of the core not just in shape and size but in the temperature and density spatial distributions, thus characterizing the core with an unprecedented level of detail.
△ Less
Submitted 15 May, 2014;
originally announced May 2014.
-
Performance of an LPD prototype detector at MHz frame rates under Synchrotron and FEL radiation
Authors:
Andreas Koch,
Matthew Hart,
Tim Nicholls,
Christian Angelsen,
John Coughlan,
Marcus French,
Steffen Hauf,
Markus Kuster,
Jolanta Sztuk-Dambietz,
Monica Turcato,
Gabriella A. Carini,
Matthieu Chollet,
Sven C. Herrmann,
Henrik T. Lemke,
Silke Nelson,
Sanghoon Song,
Matt Weaver,
Diling Zhu,
Alke Meents,
Pontus Fischer
Abstract:
A MHz frame rate X-ray area detector (LPD - Large Pixel Detector) is under development by the Rutherford Appleton Laboratory for the European XFEL. The detector will have 1 million pixels and allows analogue storage of 512 images taken at 4.5 MHz in the detector front end. The LPD detector has 500 mm thick silicon sensor tiles that are bump bonded to a readout ASIC. The ASICs preamplifier provides…
▽ More
A MHz frame rate X-ray area detector (LPD - Large Pixel Detector) is under development by the Rutherford Appleton Laboratory for the European XFEL. The detector will have 1 million pixels and allows analogue storage of 512 images taken at 4.5 MHz in the detector front end. The LPD detector has 500 mm thick silicon sensor tiles that are bump bonded to a readout ASIC. The ASICs preamplifier provides relatively low noise at high speed which results in a high dynamic range of 10^5 photons over an energy range of 5-20 keV. Small scale prototypes of 32x256 pixels (LPD 2-Tile detector) and 256x256 pixels (LPD supermodule detector) are now available for X-ray tests. The performance of prototypes of the detector is reported for first tests under synchrotron radiation (PETRA III at DESY) and Free-Electron-Laser radiation (LCLS at SLAC). The initial performance of the detector in terms of signal range and noise, radiation hardness and spatial and temporal response are reported. The main result is that the 4.5 MHz sampling detection chain is reliably working, including the analogue on-chip memory concept. The detector is at least radiation hard up to 5 MGy at 12 keV. In addition the multiple gain concept has been demonstrated over a dynamic range to 10^4 at 12 keV with a readout noise equivalent to <1 photon rms in its most sensitive mode.
△ Less
Submitted 7 November, 2013;
originally announced November 2013.
-
Status of detector development for the European XFEL
Authors:
Jolanta Sztuk-Dambietz,
Steffen Hauf,
Andreas Koch,
Markus Kuster,
Monica Turcato
Abstract:
The European X-ray Free Electron Laser (XFEL.EU) will provide as-yet-unrivaled peak brilliance and ultra-short pulses of spatially coherent X-rays with a pulse length of less than 100 fs in the energy range between 0.25 and 25 keV. The high radiation intensity and ultra-short pulse duration will open a window for novel scientific techniques and will allow to explore new phenomena in biology, chemi…
▽ More
The European X-ray Free Electron Laser (XFEL.EU) will provide as-yet-unrivaled peak brilliance and ultra-short pulses of spatially coherent X-rays with a pulse length of less than 100 fs in the energy range between 0.25 and 25 keV. The high radiation intensity and ultra-short pulse duration will open a window for novel scientific techniques and will allow to explore new phenomena in biology, chemistry, material science, as well as matter at high energy density, atomic, ion and molecular physics. The variety of scientific applications and especially the unique XFEL.EU time structure require adequate instrumentation to be developed in order to exploit the full potential of the light source. To make optimal use of the unprecedented capabilities of the European XFEL and master these vast technological challenges, the European XFEL GmbH has started a detector R&D program. The technology concepts of the detector system presently under development are complementary in their performance and will cover the requirements of a large fraction of the scientific applications envisaged for the XFEL.EU facility. The actual status of the detector development projects which includes ultra-fast 2D imaging detectors, low repetition rate 2D detectors as well as strip detectors for e.g. spectroscopy applications and the infrastructure for the detectors' calibration and tests will be presented. Furthermore, an overview of the forthcoming implementation phase of the European XFEL in terms of detector R&D will be given.
△ Less
Submitted 24 April, 2013;
originally announced April 2013.
-
Detector Development for the European XFEL: Requirements and Status
Authors:
Andreas Koch,
Markus Kuster,
Jolanta Sztuk-Dambietz,
Monica Turcato
Abstract:
The variety of applications and especially the unique European XFEL time structure will require adequate instrumentation to be developed to exploit the full potential of the light source. Two-dimensional integrating X-ray detectors with ultra-fast read out up to 4.5 MHz for 1024 x 1024 pixel images are under development for a variety of imaging applications. The actual status of the European XFEL…
▽ More
The variety of applications and especially the unique European XFEL time structure will require adequate instrumentation to be developed to exploit the full potential of the light source. Two-dimensional integrating X-ray detectors with ultra-fast read out up to 4.5 MHz for 1024 x 1024 pixel images are under development for a variety of imaging applications. The actual status of the European XFEL detector development projects is presented. Furthermore, an outlook will be given with respect to detector research and development, performance optimization, integration, and commissioning.
△ Less
Submitted 29 October, 2012; v1 submitted 5 October, 2012;
originally announced October 2012.