-
Develo** New Analysis Tools for Near Surface Radio-based Neutrino Detectors
Authors:
ARIANNA Collaboration,
A. Anker,
P. Baldi,
S. W. Barwick,
J. Beise,
D. Z. Besson,
P. Chen,
G. Gaswint,
C. Glaser,
A. Hallgren,
J. C. Hanson,
S. R. Klein,
S. A. Kleinfelder,
R. Lahmann,
J. Liu,
J. Nam,
A. Nelles,
M. P. Paul,
C. Persichilli,
I. Plaisier,
R. Rice-Smith,
J. Tatar,
K. Terveer,
S. -H Wang,
L. Zhao
Abstract:
The ARIANNA experiment is an Askaryan radio detector designed to measure high-energy neutrino induced cascades within the Antarctic ice. Ultra-high-energy neutrinos above $10^{16}$ eV have an extremely low flux, so experimental data captured at trigger level need to be classified correctly to retain more neutrino signal. We first describe two new physics-based neutrino selection methods, (the updo…
▽ More
The ARIANNA experiment is an Askaryan radio detector designed to measure high-energy neutrino induced cascades within the Antarctic ice. Ultra-high-energy neutrinos above $10^{16}$ eV have an extremely low flux, so experimental data captured at trigger level need to be classified correctly to retain more neutrino signal. We first describe two new physics-based neutrino selection methods, (the updown and dipole cut) that extend the previously published analysis to a specialized ARIANNA station with 8 antenna channels, which is double the number used in the prior analysis. For a standard trigger with a threshold signal to noise ratio at 4.4, the new cuts produce a neutrino efficiency of > 95% per station-year, while rejecting 99.93% of the background (corresponding to 53 remaining experimental background events). When the new cuts are combined with a previously developed cut using neutrino waveform templates, all background is removed at no change of efficiency. In addition, the neutrino efficiency is extrapolated to 1,000 station-years, obtaining 91%. This work then introduces a new selection method (deep learning (DL) cut) to augment the identification of neutrino events by using DL methods and compares the efficiency to the physics-based analysis. The DL cut gives 99% signal efficiency per station-year of operation while rejecting 99.997% of the background (corresponding to 2 remaining experimental background events), which are then removed by the waveform template cut at no significant change in efficiency. The results of the DL cut were verified using measured cosmic rays which shows the simulations do not introduce artifacts with respect to experimental data. The paper demonstrates the background rejection and signal efficiency of near surface antennas meets the requirements of a large scale future array, as considered in baseline design of the radio component of IceCube-Gen2.
△ Less
Submitted 26 September, 2023; v1 submitted 14 July, 2023;
originally announced July 2023.
-
Design of the Second-Generation ARIANNA Ultra-High-Energy Neutrino Detector Systems
Authors:
Stuart A. Kleinfelder
Abstract:
We report on the development of the seven station ARIANNA Hexagonal Radio Array neutrino detector systems in Antarctica. The primary goal of the ARIANNA project is to observe ultra-high energy (>100 PeV) cosmogenic neutrino signatures using a large array of autonomous stations each dispersed 1 km apart on the surface of the Ross Ice Shelf. Sensing radio emissions of 100 MHz to 1 GHz, each station…
▽ More
We report on the development of the seven station ARIANNA Hexagonal Radio Array neutrino detector systems in Antarctica. The primary goal of the ARIANNA project is to observe ultra-high energy (>100 PeV) cosmogenic neutrino signatures using a large array of autonomous stations each dispersed 1 km apart on the surface of the Ross Ice Shelf. Sensing radio emissions of 100 MHz to 1 GHz, each station in the array contains RF antennas, amplifiers, a 2 G-sample/s signal acquisition and trigger circuit I.C. (the "SST"), an embedded CPU, 32 GB of solid-state data storage, a 20 Ah LiFePO4 battery with associated battery management unit, Iridium short-burst messaging satellite and long-distance WiFi communications. The new SST chip is completely synchronous, contains 4 channels of 256 samples per channel, obtains 6 orders of magnitude sample rate range up to 2 GHz acquisition speeds. It achieves 1.5 GHz bandwidth, 12 bits RMS of dynamic range, ~1 mV RMS trigger sensitivity at >600 MHz trigger bandwidth and ps-level timing accuracy. Power is provided by the sun and LiFePO4 storage batteries, and the second-generation stations consume an average of 4W of power. The station's trigger capabilities reduce the trigger rates to a few milli-Hertz with 4-sigma thresholds while retaining high efficiency for neutrino signals.
△ Less
Submitted 23 November, 2015;
originally announced November 2015.
-
The SST Multi-G-Sample/s Switched Capacitor Array Waveform Recorder with Flexible Trigger and Picosecond-Level Timing Accuracy
Authors:
Stuart A. Kleinfelder,
Edwin Chiem,
Tarun Prakash
Abstract:
The design and performance of a multi-G-sample/s fully-synchronous analog transient waveform recorder I.C. ("SST") with fast and flexible trigger capabilities is presented. Containing 4 channels of 256 samples per channel and fabricated in a 0.25 μm CMOS process, it has a 1.9V input range on a 2.5V supply, achieves 12 bits of dynamic range, and uses ~160 mW while operating at 2 G-samples/s and ful…
▽ More
The design and performance of a multi-G-sample/s fully-synchronous analog transient waveform recorder I.C. ("SST") with fast and flexible trigger capabilities is presented. Containing 4 channels of 256 samples per channel and fabricated in a 0.25 μm CMOS process, it has a 1.9V input range on a 2.5V supply, achieves 12 bits of dynamic range, and uses ~160 mW while operating at 2 G-samples/s and full trigger speeds. With a standard 50 Ohm input source, the SST's analog input bandwidth is ~1.3 GHz within about +/-0.5 dB and reaches a -3 dB bandwidth of 1.5 GHz. The SST's internal sample clocks are generated synchronously via a shift register driven by an external LVDS oscillator, interleaved to double its speed (e.g., a 1 GHz clock yields 2 G-samples/s). It can operate over 6 orders of magnitude in sample rates (2 kHz to 2 GHz). Only three active control lines are necessary for operation: Reset, Start/Stop and Read-Clock. Each of the four channels integrates dual-threshold discrimination of signals with ~1 mV RMS resolution at >600 MHz bandwidth. Comparator results are directly available for simple threshold monitoring and rate control. The High and Low discrimination can also be AND'd over an adjustable window of time in order to exclusively trigger on bipolar impulsive signals. Trigger outputs can be CMOS or low-voltage differential signals, e.g. 1.2V CMOS or positive-ECL (0-0.8V) for low noise. After calibration, the imprecision of timing differences between channels falls in a range of 1.12-2.37 ps sigma at 2 G-samples/s.
△ Less
Submitted 10 August, 2015;
originally announced August 2015.
-
The SST Fully-Synchronous Multi-GHz Analog Waveform Recorder with Nyquist-Rate Bandwidth and Flexible Trigger Capabilities
Authors:
Stuart A. Kleinfelder,
Edwin Chiem,
Tarun Prakash
Abstract:
The design and performance of a fully-synchronous multi-GHz analog transient waveform recorder I.C. ("SST") with fast and flexible trigger capabilities is presented. The SST's objective is to provide multi-GHz sample rates with intrinsically-stable timing, Nyquist-rate sampling and high trigger bandwidth, wide dynamic range and simple operation. Containing 4 channels of 256 samples per channel, th…
▽ More
The design and performance of a fully-synchronous multi-GHz analog transient waveform recorder I.C. ("SST") with fast and flexible trigger capabilities is presented. The SST's objective is to provide multi-GHz sample rates with intrinsically-stable timing, Nyquist-rate sampling and high trigger bandwidth, wide dynamic range and simple operation. Containing 4 channels of 256 samples per channel, the SST is fabricated in an inexpensive 0.25 micrometer CMOS process and uses a high-performance package that is 8 mm on a side. It has a 1.9V input range on a 2.5V supply, exceeds 12 bits of dynamic range, and uses ~128 mW while operating at 2 G-samples/s and full trigger rates. With a standard 50 Ohm input source, the SST exceeds ~1.5 GHz -3 dB bandwidth. The SST's internal sample clocks are generated synchronously via a shift register driven by an external LVDS oscillator running at half the sample rate (e.g., a 1 GHz oscillator yields 2 G-samples/s). Because of its purely-digital synchronous nature, the SST has ps-level timing uniformity that is independent of sample frequencies spanning over 6 orders of magnitude: from under 2 kHz to over 2 GHz. Only three active control lines are necessary for operation: Reset, Start/Stop and Read-Clock. When operating as common-stop device, the time of the stop, modulo 256 relative to the start, is read out along with the sampled signal values. Each of the four channels integrates dual-threshold trigger circuitry with windowed coincidence features. Channels can discriminate signals with ~1mV RMS resolution at >600 MHz bandwidth.
△ Less
Submitted 26 May, 2015;
originally announced May 2015.
-
A Multi-Gigahertz Analog Transient Recorder Integrated Circuit
Authors:
Stuart A. Kleinfelder
Abstract:
A monolithic multi-channel analog transient recorder, implemented using switched capacitor sample-and-hold circuits and a high-speed analogically-adjustable delay-line-based write clock, has been designed, fabricated and tested. The 2.1 by 6.9 mm layout, in 1.2 micron CMOS, includes over 31,000 transistors and 2048 double polysilicon capacitors. The circuit contains four parallel channels, each wi…
▽ More
A monolithic multi-channel analog transient recorder, implemented using switched capacitor sample-and-hold circuits and a high-speed analogically-adjustable delay-line-based write clock, has been designed, fabricated and tested. The 2.1 by 6.9 mm layout, in 1.2 micron CMOS, includes over 31,000 transistors and 2048 double polysilicon capacitors. The circuit contains four parallel channels, each with a 512 deep switched-capacitor sample-and-hold system. A 512 deep edge sensitive tapped active delay line uses look-ahead and 16 way interleaving to develop the 512 sample and hold clocks, each as little as 3.2 ns wide and 200 ps apart. Measurements of the device have demonstrated 5 GHz maximum sample rate, at least 350 MHz bandwidth, an extrapolated rms aperture uncertainty per sample of 0.7 ps, and a signal to rms noise ratio of 2000:1.
△ Less
Submitted 25 April, 2015;
originally announced April 2015.
-
Design and Performance of the ARIANNA Hexagonal Radio Array Systems
Authors:
S. W. Barwick,
E. C. Berg,
D. Z. Besson,
E. Cheim,
T. Duffin,
J. C. Hanson,
S. R. Klein,
S. A. Kleinfelder,
T. Prakash,
M. Piasecki,
K. Ratzlaff,
C. Reed,
M. Roumi,
A. Samanta,
T. Stezelberger,
J. Tatar,
J. Walker,
R. Young,
L. Zou
Abstract:
We report on the development, installation and operation of the first three of seven stations deployed at the ARIANNA site's pilot Hexagonal Radio Array in Antarctica. The primary goal of the ARIANNA project is to observe ultra-high energy (>100 PeV) cosmogenic neutrino signatures using a large array of autonomous stations each dispersed 1 km apart on the surface of the Ross Ice Shelf. Sensing rad…
▽ More
We report on the development, installation and operation of the first three of seven stations deployed at the ARIANNA site's pilot Hexagonal Radio Array in Antarctica. The primary goal of the ARIANNA project is to observe ultra-high energy (>100 PeV) cosmogenic neutrino signatures using a large array of autonomous stations each dispersed 1 km apart on the surface of the Ross Ice Shelf. Sensing radio emissions of 100 MHz to 1 GHz, each station in the array contains RF antennas, amplifiers, 1.92 G-sample/s, 850 MHz bandwidth signal acquisition circuitry, pattern-matching trigger capabilities, an embedded CPU, 32 GB of solid-state data storage, and long-distance wireless and satellite communications. Power is provided by the sun and LiFePO4 storage batteries, and the stations consume an average of 7W of power. Operation on solar power has resulted in >=58% per calendar-year live-time. The station's pattern-trigger capabilities reduce the trigger rates to a few milli-Hertz with 4-sigma thresholds while retaining good stability and high efficiency for neutrino signals. The timing resolution of the station has been found to be 0.049 ps, RMS, and the angular precision of event reconstructions of signals bounced off of the sea-ice interface of the Ross Ice Shelf ranged from 0.14 to 0.17 degrees. A new fully-synchronous 2+ G-sample/s, 1.5 GHz bandwidth 4-channel signal acquisition chip with deeper memory and flexible >600 MHz, <1 mV RMS sensitivity triggering has been designed and incorporated into a single-board data acquisition and control system that uses an average of only 1.7W of power. Along with updated amplifiers, these new systems are expected to be deployed during the 2014-2015 Austral summer to complete the Hexagonal Radio Array.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.