-
In vivo and in vitro study of resorbable magnesium wires for medical implants: Mg purity, surface quality, Zn alloying and polymer coating
Authors:
K. Tesar,
J. Lunackova,
M. Jex,
M. Zaloudkova,
R. Vrbova,
M. Bartos,
P. Klein,
L. Vistejnova,
J. Duskova,
E. Filova,
Z. Sucharda,
M. Steinerova,
S. Habr,
K. Balik,
A. Singh
Abstract:
Magnesium is an excellent material in terms of biocompatibility and its corrosion products can serve as an active source for new bone formation. However, localized corrosion and H2 generation limit the potential of Mg-based implants. Utilizing low-alloyed Mg-Zn wires can strongly reduce problems with large H2 bubbles and improve the mechanical properties considerably while maintaining excellent lo…
▽ More
Magnesium is an excellent material in terms of biocompatibility and its corrosion products can serve as an active source for new bone formation. However, localized corrosion and H2 generation limit the potential of Mg-based implants. Utilizing low-alloyed Mg-Zn wires can strongly reduce problems with large H2 bubbles and improve the mechanical properties considerably while maintaining excellent long-term biocompatibility. Acidic pickling and a polymer coating can be effectively used to lower the rate of in vivo degradation. In this work, microstructural, mechanical, and in vitro characterization of 250 um and 300 um extruded wires made from ultra-pure Mg, commercially pure Mg, Mg-0.15Zn, Mg-0.4Zn and Mg-1Zn was performed. Additionally, Mg-0.4Zn wires together with a variant coated with a copolymer of L-lactide and ε-caprolactone were tested in vivo on artificially damaged Wistar rat femurs. Based on the observed Mg-induced osteogenesis, polymer-coated Mg wires with a small addition of Zn are a perspective material for bone-support applications, such as cerclage and fixation wires.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
From enrollment to exams: Perceived stress dynamics among first-year physics students
Authors:
Simon Zacharias Lahme,
Jasper Ole Cirkel,
Larissa Hahn,
Julia Hofmann,
Josefine Neuhaus,
Susanne Schneider,
Pascal Klein
Abstract:
The current dropout rate in physics studies in Germany is about 60\%, with the majority of dropouts occurring in the first year. Consequently, the physics study entry phase poses a significant challenge for many students. Students' stress perceptions can provide more profound insights into the processes and challenges during that period. In a panel study featuring 67 measuring points involving up…
▽ More
The current dropout rate in physics studies in Germany is about 60\%, with the majority of dropouts occurring in the first year. Consequently, the physics study entry phase poses a significant challenge for many students. Students' stress perceptions can provide more profound insights into the processes and challenges during that period. In a panel study featuring 67 measuring points involving up to 128 participants at each point, we investigated students' stress perceptions with the Perceived Stress Questionnaire (PSQ), identified underlying sources of stress, and assessed self-estimated workloads across two different cohorts. This examination occurred almost every week during the first semester, and for one cohort also in the second semester, yielding a total of 3,206 PSQ data points and 5,823 stressors. The PSQ data indicate a consistent stress trajectory across all three groups studied that is characterized by significant dynamics between measuring points, spanning from $M=20.1, SD=15.9$ to $M=63.6, SD=13.4$ on a scale from 0 to 100. Stress levels rise in the first weeks of the lecture, followed by stable, elevated stress levels until the exams and a relaxation phase afterward during the lecture-free time and Christmas vacation. In the first half of the lecture period, students primarily indicated the weekly exercise sheets, the physics lab course, and math courses as stressors; later on, preparation for exams and the exams themselves emerged as the most important stressors. Together with the students' self-estimated workloads that correlate with the PSQ scores, we can build a coherent picture of stress perceptions among first-year physics students. This study enhances the understanding of stress perception and its potential management.
△ Less
Submitted 25 June, 2024; v1 submitted 8 April, 2024;
originally announced April 2024.
-
$Γ$-VAE: Curvature regularized variational autoencoders for uncovering emergent low dimensional geometric structure in high dimensional data
Authors:
Jason Z. Kim,
Nicolas Perrin-Gilbert,
Erkan Narmanli,
Paul Klein,
Christopher R. Myers,
Itai Cohen,
Joshua J. Waterfall,
James P. Sethna
Abstract:
Natural systems with emergent behaviors often organize along low-dimensional subsets of high-dimensional spaces. For example, despite the tens of thousands of genes in the human genome, the principled study of genomics is fruitful because biological processes rely on coordinated organization that results in lower dimensional phenotypes. To uncover this organization, many nonlinear dimensionality r…
▽ More
Natural systems with emergent behaviors often organize along low-dimensional subsets of high-dimensional spaces. For example, despite the tens of thousands of genes in the human genome, the principled study of genomics is fruitful because biological processes rely on coordinated organization that results in lower dimensional phenotypes. To uncover this organization, many nonlinear dimensionality reduction techniques have successfully embedded high-dimensional data into low-dimensional spaces by preserving local similarities between data points. However, the nonlinearities in these methods allow for too much curvature to preserve general trends across multiple non-neighboring data clusters, thereby limiting their interpretability and generalizability to out-of-distribution data. Here, we address both of these limitations by regularizing the curvature of manifolds generated by variational autoencoders, a process we coin ``$Γ$-VAE''. We demonstrate its utility using two example data sets: bulk RNA-seq from the The Cancer Genome Atlas (TCGA) and the Genotype Tissue Expression (GTEx); and single cell RNA-seq from a lineage tracing experiment in hematopoietic stem cell differentiation. We find that the resulting regularized manifolds identify mesoscale structure associated with different cancer cell types, and accurately re-embed tissues from completely unseen, out-of distribution cancers as if they were originally trained on them. Finally, we show that preserving long-range relationships to differentiated cells separates undifferentiated cells -- which have not yet specialized -- according to their eventual fate. Broadly, we anticipate that regularizing the curvature of generative models will enable more consistent, predictive, and generalizable models in any high-dimensional system with emergent low-dimensional behavior.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
A research-informed graphical tool to visually approach Gauss' and Stokes' theorems in vector calculus
Authors:
Larissa Hahn,
Simon Blaue,
Pascal Klein
Abstract:
Gauss' and Stokes' theorems are fundamental results in vector calculus and important tools in physics and engineering. When students are asked to describe the meaning of Gauss' divergence theorem, they often use statements like this: "The sum of all sources of a vector field in a region gives the net flux out of the region". In order to raise this description to a mathematically sound level of und…
▽ More
Gauss' and Stokes' theorems are fundamental results in vector calculus and important tools in physics and engineering. When students are asked to describe the meaning of Gauss' divergence theorem, they often use statements like this: "The sum of all sources of a vector field in a region gives the net flux out of the region". In order to raise this description to a mathematically sound level of understanding, we present an educational approach based on the visual interpretation of the vector differential operators, i.e. divergence and curl. As a starting point, we use simple vector field diagrams for a qualitative approach to connect both sides of the integral theorems, and present an interactive graphical tool to support this connection. The tool allows to visualise two-dimensional vector fields, to specify vector decomposition, to evaluate divergence and curl point wise, and to draw rectangles to determine surface and line integrals. From a meta-perspective, we situate this educational approach into learning with (multiple) representations. Based on prior research, the graphical tool addresses various learning difficulties of vector fields that are connected to divergence and curl. The tool was incorporated into the weekly lecture-based recitations of Physics II (electromagnetism) in 2022 and 2023, and we assessed various educational outcome measures. The students overall reported the tool to be intuitive and user-friendly (level of agreement $76\%$, $N=125$), considered it helpful for understanding and recommended its use for introductory physics courses (level of agreement $65\%$, $N=65$).
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
Adsorption of Diclofenac and PFBS on Hair Keratin Dimer
Authors:
René Hafner,
Nils Wolfgramm,
Peter Klein,
Herbert M. Urbassek
Abstract:
Environmental pollution by man-made toxic and persistent organic compounds, found throughout the world in surface and groundwater, has various negative effects on aquatic life systems and even humans. Therefore, it is important to develop and improve water treatment technologies capable of removing such substances from wastewater or purifying drinking water. The two substances investigated are the…
▽ More
Environmental pollution by man-made toxic and persistent organic compounds, found throughout the world in surface and groundwater, has various negative effects on aquatic life systems and even humans. Therefore, it is important to develop and improve water treatment technologies capable of removing such substances from wastewater or purifying drinking water. The two substances investigated are the widely used painkiller diclofenac and a member of the class of "forever chemicals", perfluorobutane sulfonate. Both are known to have serious negative effects on living organisms, especially under long-term exposure, and are detectable in human hair, suggesting adsorption to a part of the hair fiber complex. In this study, a human hair keratin dimer is investigated for its ability to absorb diclofenac and perfluorobutane sulfonate. Initial predictions for binding sites are obtained via molecular docking and subjected to molecular dynamics simulations for more than $1$ $\mathrm{μs}$. The binding affinities obtained by the linear interaction energy method are high enough to motivate further research on human hair keratins as a sustainable, low-cost, and easily allocatable filtration material.
△ Less
Submitted 23 October, 2023; v1 submitted 17 October, 2023;
originally announced October 2023.
-
Learning digital signal processing using an interactive Jupyter notebook and smartphone accelerometer data
Authors:
Pekka Pirinen,
Pascal Klein,
Simon Zacharias Lahme,
Antti Lehtinen,
Lucija Rončević,
Ana Susac
Abstract:
Digital signal processing is a valuable practical skill for the contemporary physicist, yet in physics curricula its central concepts are often introduced either in method courses in a highly abstract and mathematics-oriented manner or in lab work with little explicit attention. In this paper, we present an experimental task in which we focus on a practical implementation of the discrete Fourier t…
▽ More
Digital signal processing is a valuable practical skill for the contemporary physicist, yet in physics curricula its central concepts are often introduced either in method courses in a highly abstract and mathematics-oriented manner or in lab work with little explicit attention. In this paper, we present an experimental task in which we focus on a practical implementation of the discrete Fourier transform (DFT) in an everyday context of vibration analysis using data collected by a smartphone accelerometer. Students are accompanied in the experiment by a Jupyter notebook companion, which serves as an interactive instruction sheet and a tool for data analysis. The task is suitable for beyond-first-year university physics students with some prior experience in uncertainty analysis, data representation, and data analysis. Based on our observations the experiment is very engaging. Students have consistently reported interest in the experiment and they have found it a good demonstration of the DFT method
△ Less
Submitted 14 June, 2023;
originally announced June 2023.
-
Physics lab courses under digital transformation: A tri-national survey among university lab instructors about the role of new digital technologies and learning objectives
Authors:
Simon Zacharias Lahme,
Pascal Klein,
Antti Lehtinen,
Andreas Müller,
Pekka Pirinen,
Lucija Rončević,
Ana Sušac
Abstract:
Physics lab courses permanently undergo transformations, in recent times especially to adapt to the emergence of new digital technologies and the Covid-19 pandemic in which digital technologies facilitated distance learning. Since these transformations often occur within individual institutions, it is useful to get an overview of these developments by capturing the status quo of digital technologi…
▽ More
Physics lab courses permanently undergo transformations, in recent times especially to adapt to the emergence of new digital technologies and the Covid-19 pandemic in which digital technologies facilitated distance learning. Since these transformations often occur within individual institutions, it is useful to get an overview of these developments by capturing the status quo of digital technologies and the related acquisition of digital competencies in physics lab courses. Thus, we conducted a survey among physics lab instructors (N=79) at German, Finnish, and Croatian universities. The findings reveal that lab instructors already use a variety of digital technologies and that the pandemic particularly boosted the use of smartphones/tablets, simulations, and digital tools for communication/collaboration/organization. The participants generally showed a positive attitude toward using digital technologies in physics lab courses, especially due to their potential for experiments and students' competence acquisition, motivational effects, and contemporaneity. Acquiring digital competencies is rated as less important than established learning objectives, however, collecting and processing data with digital tools was rated as an important competency that students should acquire. The instructors perceived open forms of labwork and particular digital technologies for specific learning objectives (e.g., microcontrollers for experimental skills) as useful for reaching their learning objectives. Our survey contributes to the reflection of what impact the emergence of digital technologies in our society and the Covid-19 pandemic had on physics lab courses and reveals first indications for the future transformation of hands-on university physics education.
△ Less
Submitted 19 September, 2023; v1 submitted 15 May, 2023;
originally announced May 2023.
-
How do physics students evaluate artificial intelligence responses on comprehension questions? A study on the perceived scientific accuracy and linguistic quality
Authors:
Merten Nikolay Dahlkemper,
Simon Zacharias Lahme,
Pascal Klein
Abstract:
This study aimed at evaluating how students perceive the linguistic quality and scientific accuracy of ChatGPT responses to physics comprehension questions. A total of 102 first- and second-year physics students were confronted with three questions of progressing difficulty from introductory mechanics (rolling motion, waves, and fluid dynamics). Each question was presented with four different resp…
▽ More
This study aimed at evaluating how students perceive the linguistic quality and scientific accuracy of ChatGPT responses to physics comprehension questions. A total of 102 first- and second-year physics students were confronted with three questions of progressing difficulty from introductory mechanics (rolling motion, waves, and fluid dynamics). Each question was presented with four different responses. All responses were attributed to ChatGPT, but in reality one sample solution was created by the researchers. All ChatGPT responses obtained in this study were wrong, imprecise, incomplete, or misleading. We found little differences in the perceived linguistic quality between ChatGPT responses and the sample solution. However, the students rated the overall scientific accuracy of the responses significantly differently, with the sample solution being rated best for the questions of low and medium difficulty. The discrepancy between the sample solution and the ChatGPT responses increased with the level of self-assessed knowledge of the question content. For the question of highest difficulty (fluid dynamics) that was unknown to most students, a ChatGPT response was rated just as good as the sample solution. Thus, this study provides data on the students' perception of ChatGPT responses and the factors influencing their perception. The results highlight the need for careful evaluation of ChatGPT responses both by instructors and students, particularly regarding scientific accuracy. Therefore, future research could explore the potential of similar "spot the bot"-activities in physics education to foster students' critical thinking skills.
△ Less
Submitted 12 May, 2023; v1 submitted 12 April, 2023;
originally announced April 2023.
-
A framework for designing experimental tasks in contemporary physics lab courses
Authors:
Simon Z. Lahme,
Pekka Pirinen,
Lucija Rončević,
Antti Lehtinen,
Ana Sušac,
Andreas Müller,
Pascal Klein
Abstract:
While lab courses are an integral part of studying physics aiming at a huge variety of learning objectives, research has shown that typical lab courses do not reach all the desired goals. While diverse approaches by lab instructors and researchers try to increase the effectiveness of lab courses, experimental tasks remain the core of any lab course. To keep an overview of these developments and to…
▽ More
While lab courses are an integral part of studying physics aiming at a huge variety of learning objectives, research has shown that typical lab courses do not reach all the desired goals. While diverse approaches by lab instructors and researchers try to increase the effectiveness of lab courses, experimental tasks remain the core of any lab course. To keep an overview of these developments and to give instructors (and researchers) a guideline for their own professional efforts at hand, we introduce a research-informed framework for designing experimental tasks in contemporary physics lab courses. In addition, we demonstrate within the scope of the EU-co-funded DigiPhysLab-project how the framework can be used to characterize existing or develop new high-quality experimental tasks for physics lab courses.
△ Less
Submitted 6 September, 2023; v1 submitted 28 February, 2023;
originally announced February 2023.
-
Ferroelectric Tunneling Junctions for Edge Computing
Authors:
Erika Covi,
Quang T. Duong,
Suzanne Lancaster,
Viktor Havel,
Jean Coignus,
Justine Barbot,
Ole Richter,
Philip Klein,
Elisabetta Chicca,
Laurent Grenouillet,
Athanasios Dimoulas,
Thomas Mikolajick,
Stefan Slesazeck
Abstract:
Ferroelectric tunneling junctions (FTJ) are considered to be the intrinsically most energy efficient memristors. In this work, specific electrical features of ferroelectric hafnium-zirconium oxide based FTJ devices are investigated. Moreover, the impact on the design of FTJ-based circuits for edge computing applications is discussed by means of two example circuits.
Ferroelectric tunneling junctions (FTJ) are considered to be the intrinsically most energy efficient memristors. In this work, specific electrical features of ferroelectric hafnium-zirconium oxide based FTJ devices are investigated. Moreover, the impact on the design of FTJ-based circuits for edge computing applications is discussed by means of two example circuits.
△ Less
Submitted 5 July, 2021;
originally announced July 2021.
-
Studying physics during the COVID-19 pandemic: Student assessments of learning achievement, perceived effectiveness of online recitations, and online laboratories
Authors:
Pascal Klein,
Lana Ivanjek,
Merten Nikolay Dahlkemper,
Katarina Jeličić,
Marie-Annette Geyer,
Stefan Küchemann,
Ana Susac
Abstract:
The COVID-19 pandemic has significantly affected the education system worldwide that was responding with a sudden shift to distance learning. Various physics courses such as lectures, tutorials, and the laboratories had to be transferred into online formats rapidly, resulting in a variety of simultaneous, asynchronous, and mixed activities. To investigate how physics students perceived the sudden…
▽ More
The COVID-19 pandemic has significantly affected the education system worldwide that was responding with a sudden shift to distance learning. Various physics courses such as lectures, tutorials, and the laboratories had to be transferred into online formats rapidly, resulting in a variety of simultaneous, asynchronous, and mixed activities. To investigate how physics students perceived the sudden shift to online learning, we developed a questionnaire and gathered data from N = 578 physics students from five universities in Germany, Austria, and Croatia. In this article, we report how the problem-solving sessions (recitations) and laboratories were adapted, how students' judge different formats of the courses and how useful and effective they perceive them. The results are correlated to the students' self-efficacy ratings and other behavioral measures (such as self-regulated learning skills) and demographics. In a related article, we focus on the online physics lectures and compare simultaneous vs. asynchronous teaching and learning methods (n.n.). We find that good communication abilities and self-organization skills are positively correlated for perceived learning achievement. Furthermore, the previous duration of studies had a significant impact on the students' perceived overall learning achievement, on the students' acquisition of experimental skills during the physics laboratories, and on their assessment of the recitations' effectiveness. That is, students in their first academic year show consistently lower scores than more progressed students. For the physics laboratories, it was found that gathering real data was crucial to the acquisition of experimental skills and the reinforcement of content. For the physics recitations, handing in own solutions for feedback was correlated with perceived effectiveness. We draw conclusions and implications for future online classes.
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
Coordinating vector field equations and diagrams with a serious game in introductory physics
Authors:
Pascal Klein,
Nicole Burkard,
Larissa Hahn,
Merten Nicolay Dahlkemper,
Kevin Eberle,
Tina Jaeger,
Jochen Kuhn,
Marc Herrlich
Abstract:
Mathematical reasoning with algebraic and graphical representations is essential for success in physics courses. Many problems require students to fluently move between algebraic and graphical representations. We developed a freely available serious game to challenge the representational fluency of introductory students regarding vector fields. Within the game, interactive puzzles are solved using…
▽ More
Mathematical reasoning with algebraic and graphical representations is essential for success in physics courses. Many problems require students to fluently move between algebraic and graphical representations. We developed a freely available serious game to challenge the representational fluency of introductory students regarding vector fields. Within the game, interactive puzzles are solved using different types of vector fields that must be configured with the correct mathematical parameters. A reward system implemented in the game prevents from using trial-and-error approaches and instead encourages the player to establish a mental connection between the graphical representation of the vector field and the (algebraic) equation before taking any action. For correct solutions, the player receives points and can unlock further levels. We report about the aim of the game from an educational perspective, describe potential learning scenarios and reflect about a first attempt to use the game in the classroom.
△ Less
Submitted 12 August, 2020;
originally announced August 2020.
-
Trajectory Deflection of Spinning Magnetic Microparticles, the Magnus Effect at the Microscale
Authors:
M. Solsona,
H. Keizer,
H. de Boer,
Y. P. Klein,
W. Olthuis,
L. Abelmann,
A. van den Berg
Abstract:
The deflection due to the Magnus force of magnetic particles with a diameter of 80 micrometer drop** through fluids and rotating in a magnetic field was measured. With Reynolds number for this experiment around 1, we found trajectory deflections of the order of 1 degree, in agreement within measurement error with theory. This method holds promise for the sorting and analysis of the distribution…
▽ More
The deflection due to the Magnus force of magnetic particles with a diameter of 80 micrometer drop** through fluids and rotating in a magnetic field was measured. With Reynolds number for this experiment around 1, we found trajectory deflections of the order of 1 degree, in agreement within measurement error with theory. This method holds promise for the sorting and analysis of the distribution in magnetic moment and particle diameter of suspensions of microparticles, such as applied in catalysis, or objects loaded with magnetic particles.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Visual attention while solving the test of understanding graphs in kinematics: An eye-tracking analysis
Authors:
Pascal Klein,
Andreas Lichtenberger,
Stefan Küchemann,
Sebastian Becker,
Martina Kekule,
Jouni Viiri,
Christiane Baadte,
Andreas Vaterlaus,
Jochen Kuhn
Abstract:
This study used eye-tracking to capture the students' visual attention while taking the test of understanding graphs in kinematics (TUG-K). A total of N = 115 upper-secondary-level students from Germany and Switzerland took the 26-item multiple-choice instrument after learning about kinematics graphs in the regular classroom. Besides choosing the correct alternative among research-based distractor…
▽ More
This study used eye-tracking to capture the students' visual attention while taking the test of understanding graphs in kinematics (TUG-K). A total of N = 115 upper-secondary-level students from Germany and Switzerland took the 26-item multiple-choice instrument after learning about kinematics graphs in the regular classroom. Besides choosing the correct alternative among research-based distractors, the students were required to judge their response confidence for each question. The items were presented sequentially on a computer screen equipped with a remote eye tracker, resulting in a set of approx. 3000 paired responses (accuracy and confidence) and about 40 hours of eye movementdata (approx. 500.000 fixations). The analysis of students' visual attention related to the item stems (questions) and the item options reveal that high response confidence is correlated with shorter visit duration on both elements of the items. While the students' response accuracy and their response confidence are highly correlated on the score level, r(115) = 0.63, p < 0.001, the eye-tracking measures do not sufficiently discriminate between correct and incorrect responses. However, a more fine-grained analysis of visual attention based on different answer options reveals a significant discrimination between correct and incorrect answers in terms of an interaction effect: Incorrect responses are associated with longer visit durations on strong distractors and less time spent on correct options while correct responses show the opposite trend. Outcomes of this study provide new insights into the validation of concept inventories based on students' behavioural level.
△ Less
Submitted 31 August, 2019;
originally announced September 2019.
-
Using Mobile Devices to Augment Inquiry-Based Learning Processes with Multiple Representations
Authors:
Sebastian Becker,
Pascal Klein,
Alexander Gößling,
Jochen Kuhn
Abstract:
Technological advances offer the possibility of using mobile devices to enrich learning environments with multimedia content. Although physical experiments play a key role in science learning, little is known about integrating multimedia learning in physical experimental processes, especially in real classroom settings. In our approach, students use tablet PCs to investigate motions with an applic…
▽ More
Technological advances offer the possibility of using mobile devices to enrich learning environments with multimedia content. Although physical experiments play a key role in science learning, little is known about integrating multimedia learning in physical experimental processes, especially in real classroom settings. In our approach, students use tablet PCs to investigate motions with an application providing multiple representations of the measurement data. We present the results of a cluster-randomized controlled trial (N=262 matched samples) that covered the topic uniform motion. The results show that the treatment not only leads to a significant reduction of extraneous cognitive load (F(1,240)=27.01, p<10-3, $η$2=0.101, $1-β$=1.000), but also to greater conceptual knowledge (F(1,259)=10.82, p=0.001, $η$2=0.048, $1-β$=0.953). Structure equation modeling statistically supports the assumption of a causal relationship between the reduction of extraneous cognitive load and the increase in conceptual understanding.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
Improving students' understanding of rotating frames of reference using videos from different perspectives
Authors:
Stefan Küchemann,
Pascal Klein,
Henning Fouckhardt,
Sebastian Gröber,
Jochen Kuhn
Abstract:
The concepts of the Coriolis and the centrifugal force are essential in various scientific fields and they are standard components of introductory physics lectures. In this paper we explore how students understand and apply concepts of rotating frames of reference in the context of an exemplary lecture demonstration experiment. We found in a $Predict-Observe-Explain$-setting, that after predicting…
▽ More
The concepts of the Coriolis and the centrifugal force are essential in various scientific fields and they are standard components of introductory physics lectures. In this paper we explore how students understand and apply concepts of rotating frames of reference in the context of an exemplary lecture demonstration experiment. We found in a $Predict-Observe-Explain$-setting, that after predicting the outcome prior to the demonstration, only one out of five physics students correctly reported the observation of the trajectory of a sphere rolling over a rotating disc. Despite this low score, a detailed analysis of distractors revealed significant conceptual learning during the observation of the experiment. In this context, we identified three main misconceptions and learning difficulties. First, the centrifugal force is only required to describe the trajectory if the object is coupled to the rotating system. Second, inertial forces cause a reaction of an object on which they act. And third, students systematically mix-up the trajectories in the stationary and the rotating frame of reference. Furthermore, we captured students' eye movements during the $Predict$ task and found that physics students with low confidence ratings focused longer on relevant task areas than confident students despite having a comparable score. Consequently, this metric is a helpful tool for the identification of misconceptions using eye tracking. Overall, the results help to understand the complexity of concept learning from demonstration experiments and provide important implications for instructional design of introductions to rotating frames of reference.
△ Less
Submitted 26 February, 2019;
originally announced February 2019.
-
Physics holo.lab learning experience: Using Smartglasses for Augmented Reality labwork to foster the concepts of heat conduction
Authors:
M. P. Strzys,
S. Kapp,
M. Thees,
P. Klein,
P. Lukowicz,
P. Knierim,
A. Schmidt,
J. Kuhn
Abstract:
Fundamental concepts of thermodynamics rely on abstract physical quantities such as energy, heat and entropy, which play an important role in the process of interpreting thermal phenomena and statistical mechanics. However, these quantities are not covered by human (visual) perception and thus, an intuitive understanding often is lacking. Today immersive technologies like head-mounted displays of…
▽ More
Fundamental concepts of thermodynamics rely on abstract physical quantities such as energy, heat and entropy, which play an important role in the process of interpreting thermal phenomena and statistical mechanics. However, these quantities are not covered by human (visual) perception and thus, an intuitive understanding often is lacking. Today immersive technologies like head-mounted displays of the newest generation, especially HoloLens, allow for high quality augmented reality learning experiences, which can overcome this perception gap and simultaneously avoid a split attention effect. In a mixed reality (MR) scenario as presented in this paper---which we call a holo.lab---human perception can be extended to the thermal regime by presenting false-color representations of the temperature of objects as a virtual augmentation directly on the real object itself in real-time. Direct feedback to experimental actions of the users in form of different representations allows for immediate comparison to theoretical principles and predictions and therefore is supposed to intensify the theory-experiment interactions and to increase the conceptual understanding. We tested this technology for an experiment on thermal conduction of metals in the framework of undergraduate laboratories. A pilot study with treatment and control groups (N = 59) showed a small positive effect of MR on students' performance measured with a standardized concept test for thermodynamics, indicating an improvement of the understanding of the underlying physical concepts.
△ Less
Submitted 12 April, 2018; v1 submitted 14 November, 2017;
originally announced November 2017.
-
Photoinduced tunability of the Reststrahlen band in 4H-SiC
Authors:
Bryan T. Spann,
Ryan Compton,
Daniel Ratchford,
James P. Long,
Adam D. Dunkelberger,
Paul B. Klein,
Alexander J. Giles,
Joshua D. Caldwell,
Jeffrey C. Owrutsky
Abstract:
Materials with a negative dielectric permittivity (e.g. metals) display high reflectance and can be shaped into nanoscale optical-resonators exhibiting extreme mode confinement, a central theme of nanophotonics. However, the ability to $actively$ tune these effects remains elusive. By photoexciting free carriers in 4H-SiC, we induce dramatic changes in reflectance near the "Reststrahlen band" wher…
▽ More
Materials with a negative dielectric permittivity (e.g. metals) display high reflectance and can be shaped into nanoscale optical-resonators exhibiting extreme mode confinement, a central theme of nanophotonics. However, the ability to $actively$ tune these effects remains elusive. By photoexciting free carriers in 4H-SiC, we induce dramatic changes in reflectance near the "Reststrahlen band" where the permittivity is negative due to charge oscillations of the polar optical phonons in the mid-infrared. We infer carrier-induced changes in the permittivity required for useful tunability (~ 40 cm$^{-1}$) in nanoscale resonators, providing a direct avenue towards the realization of actively tunable nanophotonic devices in the mid-infrared to terahertz spectral range.
△ Less
Submitted 30 November, 2015;
originally announced November 2015.
-
Molecular modelling and simulation of the surface tension of real quadrupolar fluids
Authors:
Stephan Werth,
Katrin Stöbener,
Peter Klein,
Karl-Heinz Küfer,
Martin Horsch,
Hans Hasse
Abstract:
Molecular modelling and simulation of the surface tension of fluids with force fields is discussed. 29 real fluids are studied, including nitrogen, oxygen, carbon dioxide, carbon monoxide, fluorine, chlorine, bromine, iodine, ethane, ethylene, acetylene, propyne, propylene, propadiene, carbon disulfide, sulfur hexafluoride, and many refrigerants. The fluids are represented by two-centre Lennard-Jo…
▽ More
Molecular modelling and simulation of the surface tension of fluids with force fields is discussed. 29 real fluids are studied, including nitrogen, oxygen, carbon dioxide, carbon monoxide, fluorine, chlorine, bromine, iodine, ethane, ethylene, acetylene, propyne, propylene, propadiene, carbon disulfide, sulfur hexafluoride, and many refrigerants. The fluids are represented by two-centre Lennard-Jones plus point quadrupole models from the literature. These models were adjusted only to experimental data of the vapour pressure and saturated liquid density so that the results for the surface tension are predictions. The deviations between the predictions and experimental data for the surface tension are of the order of 20 percent. The surface tension is usually overestimated by the models. For further improvements, data on the surface tension can be included in the model development. A suitable strategy for this is multi-criteria optimization based on Pareto sets. This is demonstrated using the model for carbon dioxide as an example.
△ Less
Submitted 21 August, 2014;
originally announced August 2014.