-
Understanding the Humidity Sensitivity of Sensors with TCAD Simulations
Authors:
Ilona-Stefana Ninca,
Ingo Bloch,
Ben Bruers,
Vitaliy Fadeyev,
Xavi Fernandez-Tejero,
Callan Jessiman,
John Stakely Keller,
Christoph Thomas Klein,
Thomas Koffas,
Heiko Markus Lacker,
Peilin Li,
Christian Scharf,
Ezekiel Staats,
Miguel Ullan,
Yoshinobu Unno
Abstract:
The breakdown voltage of silicon sensors without special surface is known to be affected by the ambient humidity. To understand the sensor's humidity sensitivity, Synopsys TCAD was used to simulate n-in-p test structures for different effective relative humidity. Photon emission of hot electrons was imaged with a microscope to locate breakdown in the edge-region of the sensor. The Top-Transient Cu…
▽ More
The breakdown voltage of silicon sensors without special surface is known to be affected by the ambient humidity. To understand the sensor's humidity sensitivity, Synopsys TCAD was used to simulate n-in-p test structures for different effective relative humidity. Photon emission of hot electrons was imaged with a microscope to locate breakdown in the edge-region of the sensor. The Top-Transient Current Technique was used to measure charge transport near the surface in the breakdown region of the sensor. Using the measurements and simulations, the evolution of the electric field, carrier densities and avalanche breakdown in the periphery of p-bulk silicon sensors is presented.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Setups for eliminating static charge of the ATLAS18 strip sensors
Authors:
P. Federicova,
A. Affolder,
G. A. Beck,
A. J. Bevand,
Z. Chen,
I. Dawson,
A. Deshmukh,
A. Dowling,
V. Fadeyev,
J. Fernandez-Tejero,
A. Fournier,
N. Gonzalez,
L. Hommels,
C. Jessiman,
S. Kachiguin,
Ch. Klein,
T. Koffas,
J. Kroll,
V. Latonova,
M. Mikestikova,
P. S. Miyagawa,
S. O'Toole,
Q. Paddock,
L. Poley,
E. Staats
, et al. (5 additional authors not shown)
Abstract:
Construction of the new all-silicon Inner Tracker (ITk), developed by the ATLAS collaboration for the High Luminosity LHC, started in 2020 and is expected to continue till 2028. The ITk detector will include 18,000 highly segmented and radiation hard n+-in-p silicon strip sensors (ATLAS18), which are being manufactured by Hamamatsu Photonics. Mechanical and electrical characteristics of produced s…
▽ More
Construction of the new all-silicon Inner Tracker (ITk), developed by the ATLAS collaboration for the High Luminosity LHC, started in 2020 and is expected to continue till 2028. The ITk detector will include 18,000 highly segmented and radiation hard n+-in-p silicon strip sensors (ATLAS18), which are being manufactured by Hamamatsu Photonics. Mechanical and electrical characteristics of produced sensors are measured upon their delivery at several institutes participating in a complex Quality Control (QC) program. The QC tests performed on each individual sensor check the overall integrity and quality of the sensor. During the QC testing of production ATLAS18 strip sensors, an increased number of sensors that failed the electrical tests was observed. In particular, IV measurements indicated an early breakdown, while large areas containing several tens or hundreds of neighbouring strips with low interstrip isolation were identified by the Full strip tests, and leakage current instabilities were measured in a long-term leakage current stability setup. Moreover, a high surface electrostatic charge reaching a level of several hundreds of volts per inch was measured on a large number of sensors and on the plastic sheets, which mechanically protect these sensors in their paper envelopes. Accumulated data indicates a clear correlation between observed electrical failures and the sensor charge-up. To mitigate the above-described issues, the QC testing sites significantly modified the sensor handling procedures and introduced sensor recovery techniques based on irradiation of the sensor surface with UV light or application of intensive flows of ionized gas. In this presentation, we will describe the setups implemented by the QC testing sites to treat silicon strip sensors affected by static charge and evaluate the effectiveness of these setups in terms of improvement of the sensor performance.
△ Less
Submitted 18 December, 2023; v1 submitted 27 September, 2023;
originally announced September 2023.
-
Dry-to-Wet Soil Gradients Enhance Convection and Rainfall over Subtropical South America
Authors:
Divyansh Chug,
Francina Dominguez,
Christopher M Taylor,
Cornelia Klein,
Stephen W Nesbitt
Abstract:
Soil moisture-precipitation (SM-PPT) feedbacks at the mesoscale represent a major challenge for numerical weather prediction, especially for subtropical regions that exhibit large variability in surface SM. How does surface heterogeneity, specifically mesoscale gradients in SM and land surface temperature (LST), affect convective initiation (CI) over South America? Using satellite data, we track n…
▽ More
Soil moisture-precipitation (SM-PPT) feedbacks at the mesoscale represent a major challenge for numerical weather prediction, especially for subtropical regions that exhibit large variability in surface SM. How does surface heterogeneity, specifically mesoscale gradients in SM and land surface temperature (LST), affect convective initiation (CI) over South America? Using satellite data, we track nascent, daytime convective clouds and quantify the underlying antecedent (morning) surface heterogeneity. We find that convection initiates preferentially on the dry side of strong SM/LST boundaries with spatial scales of tens of kilometers. The strongest alongwind gradients in LST anomalies at 30 km length scale underlying the CI location occur during weak background low-level wind (<2.5m/s), high convective available potential energy (>1500J/kg) and low convective inhibition (<250J/kg) over sparse vegetation. At 100 km scale, strong gradients occur at the CI location during convectively unfavorable conditions and strong background flow. The location of PPT is strongly sensitive to the strength of the background flow. The wind profile during weak background flow inhibits propagation of convection away from the dry regions leading to negative SM-PPT feedback whereas strong background flow is related to longer lifecycle and rainfall hundreds of kilometers away from the CI location. Thus, the sign of the SM-PPT feedback is dependent on the background flow. This work presents the first observational evidence that CI over subtropical South America is associated with dry soil patches on the order of tens of kilometers. Convection-permitting numerical weather prediction models need to be examined for accurately capturing the effect of SM heterogeneity in initiating convection over such semi-arid regions.
△ Less
Submitted 10 April, 2023;
originally announced April 2023.
-
Turbulence characteristics of switchbacks and non-switchbacks intervals observed by \emph{Parker Solar Probe}
Authors:
Sofiane Bourouaine,
Jean C. Perez,
Kristopher C. Klein,
Christopher H. K. Chen,
Mihailo Martinovic,
Stuart D. Bale,
Justin C. Kasper,
Nour E. Raouafi
Abstract:
We use \emph{Parker Solar Probe} (\emph{PSP}) in-situ measurements to analyze the characteristics of solar wind turbulence during the first solar encounter covering radial distances between $35.7R_\odot$ and $41.7R_\odot$. In our analysis we isolate so-called switchback (SB) intervals (folded magnetic field lines) from non-switchback (NSB) intervals, which mainly follow the Parker spiral field. Us…
▽ More
We use \emph{Parker Solar Probe} (\emph{PSP}) in-situ measurements to analyze the characteristics of solar wind turbulence during the first solar encounter covering radial distances between $35.7R_\odot$ and $41.7R_\odot$. In our analysis we isolate so-called switchback (SB) intervals (folded magnetic field lines) from non-switchback (NSB) intervals, which mainly follow the Parker spiral field. Using a technique based on conditioned correlation functions, we estimate the power spectra of Elsasser, magnetic and bulk velocity fields separately in the SB and NSB intervals. In comparing the turbulent energy spectra of the two types of intervals, we find the following characteristics: 1) The decorrelation length of the backward-propagating Elsasser field $z^-$ is larger in the NSB intervals than the one in the SB intervals; 2) the magnetic power spectrum in SB intervals is steeper, with spectral index close to -5/3, than in NSB intervals, which have a spectral index close to -3/2; 3) both SB and NSB turbulence are imbalanced with NSB having the largest cross-helicity, 4) the residual energy is larger in the SB intervals than in NSB, and 5) the analyzed fluctuations are dominated by Alfvénic fluctuations that are propagating in the \emph{sunward} (\emph{anti-sunward}) direction for the SB (NSB) turbulence. These observed features provide further evidence that the switchbacks observed by \emph{PSP} are associated with folded magnetic field lines giving insight into their turbulence nature.
△ Less
Submitted 29 September, 2020;
originally announced October 2020.
-
The ABC130 barrel module prototy** programme for the ATLAS strip tracker
Authors:
Luise Poley,
Craig Sawyer,
Sagar Addepalli,
Anthony Affolder,
Bruno Allongue,
Phil Allport,
Eric Anderssen,
Francis Anghinolfi,
Jean-François Arguin,
Jan-Hendrik Arling,
Olivier Arnaez,
Nedaa Alexandra Asbah,
Joe Ashby,
Eleni Myrto Asimakopoulou,
Naim Bora Atlay,
Ludwig Bartsch,
Matthew J. Basso,
James Beacham,
Scott L. Beaupré,
Graham Beck,
Carl Beichert,
Laura Bergsten,
Jose Bernabeu,
Prajita Bhattarai,
Ingo Bloch
, et al. (224 additional authors not shown)
Abstract:
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000…
▽ More
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototy** programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototy** program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
NANOGrav Education and Outreach: Growing a Diverse and Inclusive Collaboration for Low-Frequency Gravitational Wave Astronomy
Authors:
The NANOGrav Collaboration,
P. T. Baker,
H. Blumer,
A. Brazier,
S. Chatterjee,
B. Christy,
F. Crawford,
M. E. DeCesar,
T. Dolch,
N. E. Garver-Daniels,
J. S. Hazboun,
K. Holley-Bockelmann,
D. L. Kaplan,
J . S. Key,
T. C. Klein,
M. T. Lam,
N. Lewandowska,
D. R. Lorimer,
R. S. Lynch,
M. A. McLaughlin,
N. McMann,
J. Page,
N. T. Palliyaguru,
J. D. Romano,
X. Siemens
, et al. (3 additional authors not shown)
Abstract:
The new field of gravitational wave astrophysics requires a growing pool of students and researchers with unique, interdisciplinary skill sets. It also offers an opportunity to build a diverse, inclusive astronomy community from the ground up. We describe the efforts used by the North American Nanohertz Observatory for Gravitational Waves (NANOGrav) NSF Physics Frontiers Center to foster such grow…
▽ More
The new field of gravitational wave astrophysics requires a growing pool of students and researchers with unique, interdisciplinary skill sets. It also offers an opportunity to build a diverse, inclusive astronomy community from the ground up. We describe the efforts used by the North American Nanohertz Observatory for Gravitational Waves (NANOGrav) NSF Physics Frontiers Center to foster such growth by involving students at all levels in low-frequency gravitational wave astrophysics with pulsar timing arrays (PTAs) and establishing collaboration policies that ensure broad participation by diverse groups. We describe and illustrate the impact of these techniques on our collaboration as a case study for other distributed collaborations.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
A next-generation LHC heavy-ion experiment
Authors:
D. Adamová,
G. Aglieri Rinella,
M. Agnello,
Z. Ahammed,
D. Aleksandrov,
A. Alici,
A. Alkin,
T. Alt,
I. Altsybeev,
D. Andreou,
A. Andronic,
F. Antinori,
P. Antonioli,
H. Appelshäuser,
R. Arnaldi,
I. C. Arsene,
M. Arslandok,
R. Averbeck,
M. D. Azmi,
X. Bai,
R. Bailhache,
R. Bala,
L. Barioglio,
G. G. Barnaföldi,
L. S. Barnby
, et al. (374 additional authors not shown)
Abstract:
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with th…
▽ More
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with the innermost layers possibly positioned inside the beam pipe. In addition to superior tracking and vertexing capabilities over a wide momentum range down to a few tens of MeV/$c$, the detector will provide particle identification via time-of-flight determination with about 20~ps resolution. In addition, electron and photon identification will be performed in a separate shower detector. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector.
△ Less
Submitted 2 May, 2019; v1 submitted 31 January, 2019;
originally announced February 2019.
-
Formalizing Atom-ty** and the Dissemination of Force Fields with Foyer
Authors:
Christoph Klein,
Andrew Z. Summers,
Matthew W. Thompson,
Justin Gilmer,
Clare McCabe,
Peter T. Cummings,
Janos Sallai,
Christopher R. Iacovella
Abstract:
A key component to enhancing reproducibility in the molecular simulation community is reducing ambiguity in the parameterization of molecular models. Ambiguity in molecular models often stems from the dissemination of molecular force fields in a format that is not directly usable or is ambiguously documented via a non-machine readable mechanism. Specifically, the lack of a general tool for perform…
▽ More
A key component to enhancing reproducibility in the molecular simulation community is reducing ambiguity in the parameterization of molecular models. Ambiguity in molecular models often stems from the dissemination of molecular force fields in a format that is not directly usable or is ambiguously documented via a non-machine readable mechanism. Specifically, the lack of a general tool for performing automated atom-ty** under the rules of a particular force field facilitates errors in model parameterization that may go unnoticed if other researchers are unable reproduce this process. Here, we present Foyer, a Python tool that enables users to define force field atom-ty** rules in a format that is both machine- and human-readable thus eliminating ambiguity in atom-ty** and additionally providing a framework for force field dissemination. Foyer defines force fields in an XML format, where SMARTS strings are used to define the chemical context of a particular atom type. Herein we describe the underlying methodology of the Foyer package, highlighting its advantages over typical atom-ty** approaches and demonstrate is application in several use-cases.
△ Less
Submitted 7 December, 2018;
originally announced December 2018.
-
Role of dynamic capsomere supply for viral capsid self-assembly
Authors:
Marvin A. Boettcher,
Heinrich C. R. Klein,
Ulrich S. Schwarz
Abstract:
Many viruses rely on the self-assembly of their capsids to protect and transport their genomic material. For many viral systems, in particular for human viruses like hepatitis B, adeno or human immunodeficiency virus, that lead to persistent infections, capsomeres are continuously produced in the cytoplasm of the host cell while completed capsids exit the cell for a new round of infection. Here we…
▽ More
Many viruses rely on the self-assembly of their capsids to protect and transport their genomic material. For many viral systems, in particular for human viruses like hepatitis B, adeno or human immunodeficiency virus, that lead to persistent infections, capsomeres are continuously produced in the cytoplasm of the host cell while completed capsids exit the cell for a new round of infection. Here we use coarse-grained Brownian dynamics simulations of a generic patchy particle model to elucidate the role of the dynamic supply of capsomeres for the reversible self-assembly of empty T1 icosahedral virus capsids. We find that for high rates of capsomere influx only a narrow range of bond strengths exists for which a steady state of continuous capsid production is possible. For bond strengths smaller and larger than this optimal value, the reaction volume becomes crowded by small and large intermediates, respectively. For lower rates of capsomere influx a broader range of bond strengths exists for which a steady state of continuous capsid production is established, although now the production rate of capsids is smaller. Thus our simulations suggest that the importance of an optimal bond strength for viral capsid assembly typical for in vitro conditions can be reduced by the dynamic influx of capsomeres in a cellular environment.
△ Less
Submitted 31 January, 2015;
originally announced February 2015.
-
On the integrable elliptic cylindrical Kadomtsev-Petviashvili equation
Authors:
K. R. Khusnutdinova,
C. Klein,
V. B. Matveev,
A. O. Smirnov
Abstract:
There exist two versions of the Kadomtsev-Petviashvili equation, related to the Cartesian and cylindrical geometries of the waves. In this paper we derive and study a new version, related to the elliptic cylindrical geometry. The derivation is given in the context of surface waves, but the derived equation is a universal integrable model applicable to generic weakly-nonlinear weakly-dispersive wav…
▽ More
There exist two versions of the Kadomtsev-Petviashvili equation, related to the Cartesian and cylindrical geometries of the waves. In this paper we derive and study a new version, related to the elliptic cylindrical geometry. The derivation is given in the context of surface waves, but the derived equation is a universal integrable model applicable to generic weakly-nonlinear weakly-dispersive waves. We also show that there exist nontrivial transformations between all three versions of the KP equation associated with the physical problem formulation, and use them to obtain new classes of approximate solutions for water waves.
△ Less
Submitted 25 January, 2013; v1 submitted 7 August, 2012;
originally announced August 2012.