-
Analysis of a single-mode waveguide at sub-terahertz frequencies as a communication channel
Authors:
Marc Westig,
Holger Thierschmann,
Allard Katan,
Matvey Finkel,
Teun M. Klapwijk
Abstract:
We study experimentally the transmission of an electro-magnetic waveguide in the frequency range from 160 to 300 GHz. Photo-mixing is used to excite and detect the fundamental TE10 mode in a rectangular waveguide with two orders-of-magnitude lower impedance. The large impedance mismatch leads to a strong frequency dependence of the transmission, which we measure with a high-dynamic range of up to…
▽ More
We study experimentally the transmission of an electro-magnetic waveguide in the frequency range from 160 to 300 GHz. Photo-mixing is used to excite and detect the fundamental TE10 mode in a rectangular waveguide with two orders-of-magnitude lower impedance. The large impedance mismatch leads to a strong frequency dependence of the transmission, which we measure with a high-dynamic range of up to 80 dB, and with high frequency-resolution. The modified transmission function is directly related to the information rate of the waveguide, which we estimate to be about 1 bit per photon. We suggest that the results are applicable to a Josephson junction employed as a single-photon source and coupled to a superconducting waveguide to achieve a simple on-demand narrow-bandwidth free-space number-state channel.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
Local electrodynamics of a disordered conductor model system measured with a microwave impedance microscope
Authors:
Holger Thierschmann,
Hale Cetinay,
Matvey Finkel,
Allard J. Katan,
Marc P. Westig,
Piet Van Mieghem,
Teun M. Klapwijk
Abstract:
We study the electrodynamic impedance of percolating conductors with a pre-defined network topology using a scanning microwave impedance microscope (sMIM) at GHz frequencies. For a given percolation number we observe strong spatial variations across a sample which correlate with the connected regions (clusters) in the network when the resistivity is low such as in Aluminum. For the more resistive…
▽ More
We study the electrodynamic impedance of percolating conductors with a pre-defined network topology using a scanning microwave impedance microscope (sMIM) at GHz frequencies. For a given percolation number we observe strong spatial variations across a sample which correlate with the connected regions (clusters) in the network when the resistivity is low such as in Aluminum. For the more resistive material NbTiN the impedance becomes dominated by the local structure of the percolating network (connectivity). The results can qualitatively be understood and reproduced with a network current spreading model based on the pseudo-inverse Laplacian of the underlying network graph.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Shielded cantilever with on-chip interferometer circuit for THz scanning probe impedance microscopy
Authors:
Matvey Finkel,
Holger Thierschmann,
Allard J. Katan,
Marc P. Westig,
Marco Spirito,
Teun M. Klapwijk
Abstract:
We have realized a microstrip based THz near field cantilever which enables quantitative measurements of the impedance of the probe tip at THz frequencies (0.3 THz). A key feature is the on-chip balanced hybrid coupler which serves as an interferometer for passive signal cancellation to increase the readout circuit sensitivity despite extreme impedance mismatch at the tip. We observe distinct chan…
▽ More
We have realized a microstrip based THz near field cantilever which enables quantitative measurements of the impedance of the probe tip at THz frequencies (0.3 THz). A key feature is the on-chip balanced hybrid coupler which serves as an interferometer for passive signal cancellation to increase the readout circuit sensitivity despite extreme impedance mismatch at the tip. We observe distinct changes in the reflection coefficient of the tip when brought into contact with different dielectric (Si, SrTiO3) and metallic samples (Au). By comparing to finite element simulations we determine the sensitivity of our THz probe to be well below 0.25 fF. The cantilever further allows for topography imaging in a conventional atomic force microscope mode. Our THz cantilever removes several critical technology challenges and thus enables a shielded cantilever based THz near field microscope.
△ Less
Submitted 27 June, 2019;
originally announced June 2019.
-
Engineering physics of superconducting hot-electron bolometer mixers
Authors:
T. M. Klapwijk,
A. V. Semenov
Abstract:
Superconducting hot-electron bolometers are presently the best performing mixing devices for the frequency range beyond 1.2 THz, where good quality superconductor-insulator-superconductor (SIS) devices do not exist. Their physical appearance is very simple: an antenna consisting of a normal metal, sometimes a normal metal-superconductor bilayer, connected to a thin film of a narrow, short supercon…
▽ More
Superconducting hot-electron bolometers are presently the best performing mixing devices for the frequency range beyond 1.2 THz, where good quality superconductor-insulator-superconductor (SIS) devices do not exist. Their physical appearance is very simple: an antenna consisting of a normal metal, sometimes a normal metal-superconductor bilayer, connected to a thin film of a narrow, short superconductor with a high resistivity in the normal state. The device is brought into an optimal operating regime by applying a dc current and a certain amount of local- oscillator power. Despite this technological simplicity its operation has been found to be controlled by many different aspects of superconductivity, all occurring simultaneously. A core ingredient is the understanding that there are two sources of resistance in a superconductor: a charge conversion resistance occurring at an normal-metal-superconductor interface and a resistance due to time- dependent changes of the superconducting phase. The latter is responsible for the actual mixing process in a non-uniform superconducting environment set up by the bias-conditions and the geometry. The present understanding indicates that further improvement needs to be found in the use of other materials with a faster energy-relaxation rate. Meanwhile several empirical parameters have become physically meaningful indicators of the devices, which will facilitate the technological developments.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
-
Josephson parametric reflection amplifier with integrated directionality
Authors:
M. P. Westig,
T. M. Klapwijk
Abstract:
A directional superconducting parametric amplifier in the GHz frequency range is designed and analyzed, suitable for low-power read-out of microwave kinetic inductance detectors employed in astrophysics and when combined with a nonreciprocal device at its input also for circuit quantum electrodynamics (cQED). It consists of an one wavelength long nondegenerate Josephson parametric reflection ampli…
▽ More
A directional superconducting parametric amplifier in the GHz frequency range is designed and analyzed, suitable for low-power read-out of microwave kinetic inductance detectors employed in astrophysics and when combined with a nonreciprocal device at its input also for circuit quantum electrodynamics (cQED). It consists of an one wavelength long nondegenerate Josephson parametric reflection amplifier circuit. The device has two Josephson junction oscillators, connected via a tailored impedance to an on-chip passive circuit which directs the in- to the output port. The amplifier provides a gain of 20 dB over a bandwidth of 220 MHz on the signal as well as on the idler portion of the amplified input and the total photon shot noise referred to the input corresponds to maximally 1.3 photons per second per Hertz of bandwidth. We predict a factor of four increase in dynamic range compared to conventional Josephson parametric amplifiers.
△ Less
Submitted 19 May, 2018; v1 submitted 28 June, 2017;
originally announced June 2017.
-
Nonequilibrium interpretation of DC properties of NbN superconducting hot electron bolometers
Authors:
M. Shcherbatenko,
I. Tretyakov,
Yu. Lobanov,
S. N. Maslennikov,
N. Kaurova,
M. Finkel,
B. Voronov,
G. Goltsman,
T. M. Klapwijk
Abstract:
We present a physically consistent interpretation of the dc electrical properties of niobiumnitride (NbN)-based superconducting hot-electron bolometer (HEB-) mixers, using concepts of nonequilibrium superconductivity. Through this we clarify what physical information can be extracted from the resistive transition and the dc current-voltage characteristics, measured at suitably chosen temperatures,…
▽ More
We present a physically consistent interpretation of the dc electrical properties of niobiumnitride (NbN)-based superconducting hot-electron bolometer (HEB-) mixers, using concepts of nonequilibrium superconductivity. Through this we clarify what physical information can be extracted from the resistive transition and the dc current-voltage characteristics, measured at suitably chosen temperatures, and relevant for device characterization and optimization. We point out that the intrinsic spatial variation of the electronic properties of disordered superconductors, such as NbN, leads to a variation from device to device.
△ Less
Submitted 4 October, 2016; v1 submitted 20 September, 2016;
originally announced September 2016.
-
Superconducting NbTiN Thin Films with Highly Uniform Properties over a 100 mm diameter Wafer
Authors:
D. J. Thoen,
B. G. C. Bos,
E. A. F. Haalebos,
T. M. Klapwijk,
J. J. A. Baselmans,
A. Endo
Abstract:
Uniformity in thickness and electronic properties of superconducting niobium titanium nitride (NbTiN) thin films is a critical issue for upscaling superconducting electronics, such as microwave kinetic inductance detectors for submillimeter wave astronomy. In this article we make an experimental comparison between the uniformity of NbTiN thin films produced by two DC magnetron sputtering systems w…
▽ More
Uniformity in thickness and electronic properties of superconducting niobium titanium nitride (NbTiN) thin films is a critical issue for upscaling superconducting electronics, such as microwave kinetic inductance detectors for submillimeter wave astronomy. In this article we make an experimental comparison between the uniformity of NbTiN thin films produced by two DC magnetron sputtering systems with vastly different target sizes: the Nordiko 2000 equipped with a circular 100mm diameter target, and the Evatec LLS801 with a rectangular target of 127 mm x 444.5 mm. In addition to the films deposited staticly in both systems, we have also deposited films in the LLS801 while shuttling the substrate in front of the target, with the aim of further enhancing the uniformity. Among these three setups, the LLS801 system with substrate shuttling has yielded the highest uniformity in film thickness (+/-2%), effective resistivity (decreasing by 5% from center to edge), and superconducting critical temperature (T_c = 15.0 K - 15.3 K) over a 100 mm diameter wafer. However, the shuttling appears to increase the resistivity by almost a factor of 2 compared to static deposition. Surface SEM inspections suggest that the shuttling could have induced a different mode of microstructural film growth.
△ Less
Submitted 22 November, 2016; v1 submitted 6 September, 2016;
originally announced September 2016.
-
Probing the Nuclear Spin-Lattice Relaxation Time at the Nanoscale
Authors:
J. J. T. Wagenaar,
A. M. J. den Haan,
J. M. de Voogd,
L. Bossoni,
T. A. de Jong,
M. de Wit,
K. M. Bastiaans,
D. J. Thoen,
A. Endo,
T. M. Klapwijk,
J. Zaanen,
T. H. Oosterkamp
Abstract:
Nuclear spin-lattice relaxation times are measured on copper using magnetic resonance force microscopy performed at temperatures down to 42 mK. The low temperature is verified by comparison with the Korringa relation. Measuring spin-lattice relaxation times locally at very low temperatures opens up the possibility to measure the magnetic properties of inhomogeneous electron systems realized in oxi…
▽ More
Nuclear spin-lattice relaxation times are measured on copper using magnetic resonance force microscopy performed at temperatures down to 42 mK. The low temperature is verified by comparison with the Korringa relation. Measuring spin-lattice relaxation times locally at very low temperatures opens up the possibility to measure the magnetic properties of inhomogeneous electron systems realized in oxide interfaces, topological insulators and other strongly correlated electron systems such as high-Tc superconductors.
△ Less
Submitted 27 June, 2016; v1 submitted 14 March, 2016;
originally announced March 2016.
-
Performance of Hybrid NbTiN-Al Microwave Kinetic Inductance Detectors as Direct Detectors for Sub-millimeter Astronomy
Authors:
R. M. J. Janssen,
J. J. A. Baselmans,
A. Endo,
L. Ferrari,
S. J. C. Yates,
A. M. Baryshev,
T. M. Klapwijk
Abstract:
In the next decades millimeter and sub-mm astronomy requires large format imaging arrays and broad-band spectrometers to complement the high spatial and spectral resolution of the Atacama Large Millimeter/sub-millimeter Array. The desired sensors for these instruments should have a background limited sensitivity and a high optical efficiency and enable arrays thousands of pixels in size. Hybrid mi…
▽ More
In the next decades millimeter and sub-mm astronomy requires large format imaging arrays and broad-band spectrometers to complement the high spatial and spectral resolution of the Atacama Large Millimeter/sub-millimeter Array. The desired sensors for these instruments should have a background limited sensitivity and a high optical efficiency and enable arrays thousands of pixels in size. Hybrid microwave kinetic inductance detectors consisting of NbTiN and Al have shown to satisfy these requirements. We present the second generation hybrid NbTiN-Al MKIDs, which are photon noise limited in both phase and amplitude readout for loading levels $P_{850GHz} \geq 10$ fW. Thanks to the increased responsivity, the photon noise level achieved in phase allows us to simultaneously read out approximately 8000 pixels using state-of-the-art electronics. In addition, the choice of superconducting materials and the use of a Si lens in combination with a planar antenna gives these resonators the flexibility to operate within the frequency range $0.09 < ν< 1.1$ THz. Given these specifications, hybrid NbTiN-Al MKIDs will enable astronomically usable kilopixel arrays for sub-mm imaging and moderate resolution spectroscopy.
△ Less
Submitted 14 August, 2014;
originally announced August 2014.
-
Equivalence of Optical and Electrical Noise Equivalent Power of Hybrid NbTiN-Al Microwave Kinetic Inductance Detectors
Authors:
R. M. J. Janssen,
A. Endo,
P. J. de Visser,
T. M. Klapwijk,
J. J. A. Baselmans
Abstract:
We have measured and compared the response of hybrid NbTiN-Al Microwave Kinetic Inductance Detectors (MKIDs) to changes in bath temperature and illumination by sub-mm radiation. We show that these two stimulants have an equivalent effect on the resonance feature of hybrid MKIDs. We determine an electrical NEP from the measured temperature responsivity, quasiparticle recombination time, superconduc…
▽ More
We have measured and compared the response of hybrid NbTiN-Al Microwave Kinetic Inductance Detectors (MKIDs) to changes in bath temperature and illumination by sub-mm radiation. We show that these two stimulants have an equivalent effect on the resonance feature of hybrid MKIDs. We determine an electrical NEP from the measured temperature responsivity, quasiparticle recombination time, superconducting transition temperature and noise spectrum, all of which can be measured in a dark environment. For the two hybrid NbTiN-Al MKIDs studied in detail the electrical NEP is within a factor of two of the optical NEP, which is measured directly using a blackbody source.
△ Less
Submitted 17 November, 2014; v1 submitted 14 August, 2014;
originally announced August 2014.
-
High optical efficiency and photon noise limited sensitivity of microwave kinetic inductance detectors using phase readout
Authors:
R. M. J. Janssen,
J. J. A. Baselmans,
A. Endo,
L. Ferrari,
S. J. C. Yates,
A. M. Baryshev,
T. M. Klapwijk
Abstract:
We demonstrate photon noise limited performance in both phase and amplitude readout in microwave kinetic inductance detectors (MKIDs) consisting of NbTiN and Al, down to 100 fW of optical power. We simulate the far field beam pattern of the lens-antenna system used to couple radiation into the MKID and derive an aperture efficiency of 75%. This is close to the theoretical maximum of 80% for a sing…
▽ More
We demonstrate photon noise limited performance in both phase and amplitude readout in microwave kinetic inductance detectors (MKIDs) consisting of NbTiN and Al, down to 100 fW of optical power. We simulate the far field beam pattern of the lens-antenna system used to couple radiation into the MKID and derive an aperture efficiency of 75%. This is close to the theoretical maximum of 80% for a single-moded detector. The beam patterns are verified by a detailed analysis of the optical coupling within our measurement setup.
△ Less
Submitted 11 November, 2013;
originally announced November 2013.
-
Power Handling and Responsivity of Submicron Wide Superconducting Coplanar Waveguide Resonators
Authors:
R. M. J. Janssen,
A. Endo,
J. J. A. Baselmans,
P. J. de Visser,
R. Barends,
T. M. Klapwijk
Abstract:
The sensitivity of microwave kinetic inductance detectors (MKIDs) based on coplanar waveguides (CPWs) needs to be improved by at least an order of magnitude to satisfy the requirements for space-based terahertz astronomy. Our aim is to investigate if this can be achieved by reducing the width of the CPW to much below what has typically been made using optical lithography (> 1 μm). CPW resonators w…
▽ More
The sensitivity of microwave kinetic inductance detectors (MKIDs) based on coplanar waveguides (CPWs) needs to be improved by at least an order of magnitude to satisfy the requirements for space-based terahertz astronomy. Our aim is to investigate if this can be achieved by reducing the width of the CPW to much below what has typically been made using optical lithography (> 1 μm). CPW resonators with a central line width as narrow as 300 nm were made in NbTiN using electron beam lithography and reactive ion etching. In a systematic study of quarter-wave CPW resonators with varying widths it is shown that the behavior of responsivity, noise and power handling as a function of width continues down to 300 nm. This encourages the development of narrow KIDs using Al in order to improve their sensitivity.
△ Less
Submitted 4 June, 2012;
originally announced June 2012.
