-
Local thermodynamic description of isothermal single-phase flow in porous media
Authors:
Olav Galteland,
Michael T. Rauter,
Mina S. Bratvold,
Thuat T. Trinh,
Dick Bedeaux,
Signe Kjelstrup
Abstract:
Darcy's law for porous media transport is given a new local thermodynamic basis in terms of the grand potential of confined fluids. The local effective pressure gradient is determined using non-equilibrium molecular dynamics, and the hydraulic conductivity and permeability are investigated. The transport coefficients are determined for single-phase flow in face-centered cubic lattices of solid sph…
▽ More
Darcy's law for porous media transport is given a new local thermodynamic basis in terms of the grand potential of confined fluids. The local effective pressure gradient is determined using non-equilibrium molecular dynamics, and the hydraulic conductivity and permeability are investigated. The transport coefficients are determined for single-phase flow in face-centered cubic lattices of solid spheres. The porosity changed from that in the closest packing of spheres to near unity in a pure fluid, while the fluid mass density varied from that of a dilute gas to a dense liquid. The permeability varied between \SI{5.7e-20}{\meter^2} and \SI{5.5e-17}{\meter^2}, showing a porosity-dependent Klinkenberg effect. Both transport coefficients depended on the average fluid mass density and porosity but in different ways. These results set the stage for a non-equilibrium thermodynamic investigation of coupled transport of multi-phase fluids in complex media.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Defining the pressures of a fluid in a nanoporous, heterogeneous medium
Authors:
Olav Galteland,
Michael T. Rauter,
Kevin K. Varughese,
Dick Bedeaux,
Signe Kjelstrup
Abstract:
We describe the thermodynamic state of a single-phase fluid confined to a porous medium with Hill's thermodynamics of small systems, also known as nanothermodynamics. This way of defining small system thermodynamics, with a separate set of control variables, may be useful for the study of transport in non-deformable porous media, where presently no consensus exists on pressure computations. For a…
▽ More
We describe the thermodynamic state of a single-phase fluid confined to a porous medium with Hill's thermodynamics of small systems, also known as nanothermodynamics. This way of defining small system thermodynamics, with a separate set of control variables, may be useful for the study of transport in non-deformable porous media, where presently no consensus exists on pressure computations. For a confined fluid, we observe that there are two pressures, the integral and the differential pressures. We use molecular simulations to investigate and confirm the nanothermodynamic relations for a representative elementary volume (REV). For a model system of a single-phase fluid in a face-centered cubic lattice of solid spheres of varying porosity, we calculate the fluid density, fluid-solid surface tension, replica energy, integral pressure, entropy, and internal energy.
△ Less
Submitted 31 January, 2022;
originally announced January 2022.
-
Legendre-Fenchel transforms capture layering transitions in porous media
Authors:
Olav Galteland,
Eivind Bering,
Kim Kristiansen,
Dick Bedeaux,
Signe Kjelstrup
Abstract:
We have investigated the state of a nanoconfined fluid in a slit pore in the canonical and isobaric ensembles. The systems were simulated with molecular dynamics simulations. The fluid has a transition to a close-packed structure when the height of the slit approaches the particle diameter. The Helmholtz energy is a non-convex function of the slit height if the number of particles does not exceed…
▽ More
We have investigated the state of a nanoconfined fluid in a slit pore in the canonical and isobaric ensembles. The systems were simulated with molecular dynamics simulations. The fluid has a transition to a close-packed structure when the height of the slit approaches the particle diameter. The Helmholtz energy is a non-convex function of the slit height if the number of particles does not exceed that of one monolayer. As a consequence, the Legendre transform cannot be applied to obtain the Gibbs energy. The Gibbs energy of a non-deformable slit pore can be transformed into the Helmholtz energy of a deformable slit pore using the Legendre-Fenchel transform. The Legendre-Fenchel transform corresponds to the Maxwell construction of equal areas.
△ Less
Submitted 30 November, 2021;
originally announced November 2021.
-
Theory and simulation of shock waves: Entropyproduction and energy conversion
Authors:
Bjørn Hafskjold,
Dick Bedeaux,
Øivind Wilhelmsen,
Signe Kjelstrup
Abstract:
We have considered a shock wave as a surface of discontinuity and computed the entropy production using non-equilibrium thermodynamics for surfaces. The results from this method, which we call the "Gibbs excess method" (GEM), were compared with results from three alternative methods, all based on the entropy balance in the shock front region, but with different assumptions about local equilibrium.…
▽ More
We have considered a shock wave as a surface of discontinuity and computed the entropy production using non-equilibrium thermodynamics for surfaces. The results from this method, which we call the "Gibbs excess method" (GEM), were compared with results from three alternative methods, all based on the entropy balance in the shock front region, but with different assumptions about local equilibrium. Non-equilibrium molecular dynamics (NEMD) simulations were used to simulate a thermal blast in a one-component gas consisting of particles interacting with the Lennard-Jones/spline potential. This provided data for the theoretical analysis. Two cases were studied, a weak shock with Mach number $M \approx 2$ and a strong shock with $M \approx 6$ and with a Prandtl number of the gas $Pr \approx 1.4$ in both cases. The four theoretical methods gave consistent results for the time-dependent surface excess entropy production for both Mach numbers. The internal energy was found to deviate only slightly from equilibrium values in the shock front. The pressure profile was found to be consistent with the Navier-Stokes equations. The entropy production in the weak and strong shocks were approximately proportional to the square of the Mach number and decayed with time at approximately the same relative rate. In both cases, some 97 \% of the total entropy production in the gas occurred in the shock wave. The GEM showed that most of the shock's kinetic energy was converted reversibly into enthalpy and entropy, and a small amount was dissipated as produced entropy. The shock waves traveled at almost constant speed and we found that the overpressure determined from NEMD simulations agreed well with the Rankine-Hugoniot conditions for steady-state shocks.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
Nanothermodynamic description and molecular simulation of a single-phase fluid in a slit pore
Authors:
Olav Galteland,
Dick Bedeaux,
Signe Kjelstrup
Abstract:
We describe the thermodynamic state of a highly confined single-phase and single-component fluid in a slit pore using Hill's thermodynamics of small systems. This theory was more recently named nanothermodynamics. We start by constructing an ensemble of slit pores for controlled temperature, volume, surface area, and chemical potential. We present the integral and differential properties according…
▽ More
We describe the thermodynamic state of a highly confined single-phase and single-component fluid in a slit pore using Hill's thermodynamics of small systems. This theory was more recently named nanothermodynamics. We start by constructing an ensemble of slit pores for controlled temperature, volume, surface area, and chemical potential. We present the integral and differential properties according to Hill, and use them to define the disjoining pressure. We identify all thermodynamic pressures by their mechanical counterparts in a consistent manner, and investigate the identification by molecular dynamics simulations. We define and compute the disjoining pressure, and show that it contains the standard definition. We compute the entropy and energy densities, and find in agreement with the literature, that the forces at the wall are of an energetic, not entropic nature. The subdivision potential is zero for this slit pore with large walls, but unequal to zero for related sets of control variables. We show how Hill's method can be used to find new Maxwell relations of a confined fluid, in addition to a scaling relation, which applies when the walls are separated far enough. By this expansion of nanothermodynamics, we set the stage for further developments of the thermodynamics of confined fluids, a field that is central in nanotechnology.
△ Less
Submitted 2 December, 2020; v1 submitted 1 December, 2020;
originally announced December 2020.
-
Nonequilibrium thermodynamics of surfaces captures the energy conversions in a shockwave
Authors:
Bjørn Hafskjold,
Dick Bedeaux,
Signe Kjelstrup,
Øivnd Wilhelmsen
Abstract:
The local entropy production in a shock wave was analysed in the framework of non-equilibrium thermodynamics (NET) of surfaces. We show that the thermodynamic state variables in the shock front are equal to their equilibrium values, despite lack of global equilibrium in the dense gas. This observation was used to develop a theory for the entropy production in a shock wave using Gibbs' surface exce…
▽ More
The local entropy production in a shock wave was analysed in the framework of non-equilibrium thermodynamics (NET) of surfaces. We show that the thermodynamic state variables in the shock front are equal to their equilibrium values, despite lack of global equilibrium in the dense gas. This observation was used to develop a theory for the entropy production in a shock wave using Gibbs' surface excess properties. The theoretical results were compared with a numerical evaluation of the entropy balance for the shock front and confirmed by non-equilibrium molecular dynamics (NEMD) simulations. The NET analysis shows that the dominant contribution to the entropy production is the dissipation of kinetic and compression energy. This opens the door to accurate representations of energy conversions in shock waves.
△ Less
Submitted 14 May, 2020; v1 submitted 18 March, 2020;
originally announced March 2020.
-
Onsager-Symmetry Obeyed in Athermal Mesoscopic Systems: Two-Phase Flow in Porous Media
Authors:
Mathias Winkler,
Magnus Aa. Gjennestad,
Dick Bedeaux,
Signe Kjelstrup,
Raffaela Cabriolu,
Alex Hansen
Abstract:
We compute the fluid flow time-correlation functions of incompressible, immiscible two-phase flow in porous media using a 2D network model. Given a properly chosen representative elementary volume, the flow rate distributions are Gaussian and the integrals of time correlation functions of the flows are found to converge to a finite value. The integrated cross-correlations become symmetric, obeying…
▽ More
We compute the fluid flow time-correlation functions of incompressible, immiscible two-phase flow in porous media using a 2D network model. Given a properly chosen representative elementary volume, the flow rate distributions are Gaussian and the integrals of time correlation functions of the flows are found to converge to a finite value. The integrated cross-correlations become symmetric, obeying Onsager's reciprocal relations. These findings support the proposal of a non-equilibrium thermodynamic description for two-phase flow in porous media.
△ Less
Submitted 13 January, 2020;
originally announced January 2020.
-
Pressures inside a nano-porous medium. The case of a single phase fluid
Authors:
Olav Galteland,
Dick Bedeaux,
Signe Kjelstrup
Abstract:
We define the pressure of a porous medium in terms of the grand potential, and compute its value in a nano-confined or nano-porous medium, meaning a medium where thermodynamic equations need be adjusted for smallness. On the nano-scale, the pressure depends in a crucial way on the size and shape of the pores. According to Hill, two pressures are needed to characterize this situation; the integral…
▽ More
We define the pressure of a porous medium in terms of the grand potential, and compute its value in a nano-confined or nano-porous medium, meaning a medium where thermodynamic equations need be adjusted for smallness. On the nano-scale, the pressure depends in a crucial way on the size and shape of the pores. According to Hill, two pressures are needed to characterize this situation; the integral pressure and the differential pressure. Using Hill's formalism for a nano-porous medium, we derive an expression for the difference between the integral and the differential pressures in a spherical phase $α$ of radius $R$, $\hat{p}^α-p^α= γ/{R}$. We recover the law of Young-Laplace for the differential pressure difference across the same curved surface. We discuss the definition of a representative volume element for the nano-porous medium and show that the smallest REV is half a unit cell in the direction of the pore in the fcc lattice. We also show, for the first time, how the pressure profile through a nano-porous medium can be defined and computed away from equilibrium.
△ Less
Submitted 17 December, 2018;
originally announced December 2018.
-
Non-isothermal transport of multi-phase fluids in porous media. Constitutive equations
Authors:
Signe Kjelstrup,
Dick Bedeaux,
Alex Hansen,
Bjørn Hafskjold,
Olav Galteland
Abstract:
We develop constitutive equations for multi-component, multi-phase, macro-scale flow in a porous medium exposed to temperature-, composition-, and pressure -gradients. The porous medium is non-deformable. We define the pressure and the composition of the representative elementary volume (REV) in terms of the volume and surface averaged pressure and the saturation, and the respective driving forces…
▽ More
We develop constitutive equations for multi-component, multi-phase, macro-scale flow in a porous medium exposed to temperature-, composition-, and pressure -gradients. The porous medium is non-deformable. We define the pressure and the composition of the representative elementary volume (REV) in terms of the volume and surface averaged pressure and the saturation, and the respective driving forces from these variables. New contributions due to varying porosity or surface tension offer explanations for non-Darcy behavior. The interaction of a thermal and mechanical driving forces give thermal osmosis. An experimental program is suggested to verify Onsager symmetry in the transport coefficients.
△ Less
Submitted 27 September, 2018;
originally announced September 2018.
-
Hill's nano-thermodynamics is equivalent with Gibbs' thermodynamics for curved surfaces
Authors:
Dick Bedeaux,
Signe Kjelstrup
Abstract:
We review first how properties of curved surfaces can be studied using Hill's thermodynamics, also called nano-thermodynamics. We proceed to show for the first time that Hill's analysis is equivalent to Gibbs for curved surfaces. This simplifies the study of surfaces that are curved on the nano-scale, and opens up a possibility to study non-equilibrium systems in a systematic manner.
We review first how properties of curved surfaces can be studied using Hill's thermodynamics, also called nano-thermodynamics. We proceed to show for the first time that Hill's analysis is equivalent to Gibbs for curved surfaces. This simplifies the study of surfaces that are curved on the nano-scale, and opens up a possibility to study non-equilibrium systems in a systematic manner.
△ Less
Submitted 9 June, 2018;
originally announced June 2018.
-
Non-isothermal transport of multi-phase fluids in porous media. The entropy production
Authors:
Signe Kjelstrup,
Dick Bedeaux,
Alex Hansen,
Bjørn Hafskjold,
Olav Galteland
Abstract:
We derive the entropy production for transport of multi-phase fluids in a non-deformable, porous medium exposed to differences in pressure, temperature, and chemical potentials. Thermodynamic extensive variables on the macro-scale are obtained by integrating over a representative elementary volume (REV). Using Euler homogeneity of the first order, we obtain the Gibbs equation for the REV. From thi…
▽ More
We derive the entropy production for transport of multi-phase fluids in a non-deformable, porous medium exposed to differences in pressure, temperature, and chemical potentials. Thermodynamic extensive variables on the macro-scale are obtained by integrating over a representative elementary volume (REV). Using Euler homogeneity of the first order, we obtain the Gibbs equation for the REV. From this we define the intensive variables, the temperature, pressure and chemical potentials and, using the balance equations, derive the entropy production for the REV. The entropy production defines sets of independent conjugate thermodynamic fluxes and forces in the standard way. The transport of two-phase flow of immiscible components is used to illustrate the equations.
△ Less
Submitted 10 May, 2018;
originally announced May 2018.
-
Stable and efficient time integration of a dynamic pore network model for two-phase flow in porous media
Authors:
Magnus Aa. Gjennestad,
Morten Vassvik,
Signe Kjelstrup,
Alex Hansen
Abstract:
We study three different time integration methods for a dynamic pore network model for immiscible two-phase flow in porous media. Considered are two explicit methods, the forward Euler and midpoint methods, and a new semi-implicit method developed herein. The explicit methods are known to suffer from numerical instabilities at low capillary numbers. A new time-step criterion is suggested in order…
▽ More
We study three different time integration methods for a dynamic pore network model for immiscible two-phase flow in porous media. Considered are two explicit methods, the forward Euler and midpoint methods, and a new semi-implicit method developed herein. The explicit methods are known to suffer from numerical instabilities at low capillary numbers. A new time-step criterion is suggested in order to stabilize them. Numerical experiments, including a Haines jump case, are performed and these demonstrate that stabilization is achieved. Further, the results from the Haines jump case are consistent with experimental observations. A performance analysis reveals that the semi-implicit method is able to perform stable simulations with much less computational effort than the explicit methods at low capillary numbers. The relative benefit of using the semi-implicit method increases with decreasing capillary number $\mathrm{Ca}$, and at $\mathrm{Ca} \sim 10^{-8}$ the computational time needed is reduced by three orders of magnitude. This increased efficiency enables simulations in the low-capillary number regime that are unfeasible with explicit methods and the range of capillary numbers for which the pore network model is a tractable modeling alternative is thus greatly extended by the semi-implicit method.
△ Less
Submitted 2 July, 2018; v1 submitted 2 February, 2018;
originally announced February 2018.
-
Relations between Seepage Velocities in Immiscible, Incompressible Two-Phase Flow in Porous Media
Authors:
Alex Hansen,
Santanu Sinha,
Dick Bedeaux,
Signe Kjelstrup,
Magnus Aa. Gjennestad,
Morten Vassvik
Abstract:
Based on thermodynamic considerations we derive a set of equations relating the seepage velocities of the fluid components in immiscible and incompressible two-phase flow in porous media. They necessitate the introduction of a new velocity function, the co-moving velocity. This velocity function is a characteristic of the porous medium. Together with a constitutive relation between the velocities…
▽ More
Based on thermodynamic considerations we derive a set of equations relating the seepage velocities of the fluid components in immiscible and incompressible two-phase flow in porous media. They necessitate the introduction of a new velocity function, the co-moving velocity. This velocity function is a characteristic of the porous medium. Together with a constitutive relation between the velocities and the driving forces, such as the pressure gradient, these equations form a closed set. We solve four versions of the capillary tube model analytically using this theory. We test the theory numerically on a network model.
△ Less
Submitted 19 December, 2017;
originally announced December 2017.
-
Entropy facilitated active transport
Authors:
J. M. Rubi,
A. Lervik,
D. Bedeaux,
S. Kjelstrup
Abstract:
We show how active transport of ions can be interpreted as an entropy facilitated process. In this interpretation, the pore geometry through which substrates are transported can give rise to a driving force. This gives a direct link between the geometry and the changes in Gibbs energy required. Quantifying the size of this effect for several proteins we find that the entropic contribution from the…
▽ More
We show how active transport of ions can be interpreted as an entropy facilitated process. In this interpretation, the pore geometry through which substrates are transported can give rise to a driving force. This gives a direct link between the geometry and the changes in Gibbs energy required. Quantifying the size of this effect for several proteins we find that the entropic contribution from the pore geometry is significant and we discuss how the effect can be used to interpret variations in the affinity at the binding site.
△ Less
Submitted 11 January, 2017;
originally announced January 2017.
-
A Monte Carlo Algorithm for Immiscible Two-Phase Flow in Porous Media
Authors:
Isha Savani,
Santanu Sinha,
Alex Hansen,
Dick Bedeaux,
Signe Kjelstrup,
Morten Vassvik
Abstract:
We present a Markov Chain Monte Carlo algorithm based on the Metropolis algorithm for simulation of the flow of two immiscible fluids in a porous medium under macroscopic steady-state conditions using a dynamical pore network model that tracks the motion of the fluid interfaces. The Monte Carlo algorithm is based on the configuration probability, where a configuration is defined by the positions o…
▽ More
We present a Markov Chain Monte Carlo algorithm based on the Metropolis algorithm for simulation of the flow of two immiscible fluids in a porous medium under macroscopic steady-state conditions using a dynamical pore network model that tracks the motion of the fluid interfaces. The Monte Carlo algorithm is based on the configuration probability, where a configuration is defined by the positions of all fluid interfaces. We show that the configuration probability is proportional to the inverse of the flow rate. Using a two-dimensional network, advancing the interfaces using time integration the computational time scales as the linear system size to the fourth power, whereas the Monte Carlo computational time scales as the linear size to the second power. We discuss the strengths and the weaknesses of the algorithm.
△ Less
Submitted 19 December, 2016; v1 submitted 30 June, 2016;
originally announced June 2016.
-
Ensemble Distribution for Immiscible Two-Phase Flow in Porous Media
Authors:
Isha Savani,
Dick Bedeaux,
Signe Kjelstrup,
Morten Vassvik,
Santanu Sinha,
Alex Hansen
Abstract:
We construct an ensemble distribution to describe steady immiscible two-phase flow of two incompressible fluids in a porous medium. The system is found to be ergodic. The distribution is used to compute macroscopic flow parameters. In particular, we find an expression for the overall mobility of the system from the ensemble distribution. The entropy production at the scale of the porous medium is…
▽ More
We construct an ensemble distribution to describe steady immiscible two-phase flow of two incompressible fluids in a porous medium. The system is found to be ergodic. The distribution is used to compute macroscopic flow parameters. In particular, we find an expression for the overall mobility of the system from the ensemble distribution. The entropy production at the scale of the porous medium is shown to give the expected product of the average flow and its driving force, obtained from a black-box description. We test numerically some of the central theoretical results.
△ Less
Submitted 19 December, 2016; v1 submitted 1 June, 2016;
originally announced June 2016.
-
A new set of equations describing immiscible two-phase flow in isotropic porous media
Authors:
Alex Hansen,
Santanu Sinha,
Dick Bedeaux,
Signe Kjelstrup,
Isha Savani,
Morten Vassvik
Abstract:
Based on non-equilibrium thermodynamics we derive a set of general equations relating the partial volumetric flow rates to each other and to the total volumetric flow rate in immiscible two-phase flow in porous media. These equations together with the conservation of saturation reduces the immiscible two-phase flow problem to a single-phase flow problem of a complex fluid. We discuss the new equat…
▽ More
Based on non-equilibrium thermodynamics we derive a set of general equations relating the partial volumetric flow rates to each other and to the total volumetric flow rate in immiscible two-phase flow in porous media. These equations together with the conservation of saturation reduces the immiscible two-phase flow problem to a single-phase flow problem of a complex fluid. We discuss the new equation in terms of the relative permeability equations. We test the equations on model systems, both analytically and numerically.
△ Less
Submitted 19 December, 2016; v1 submitted 10 May, 2016;
originally announced May 2016.
-
Effective Rheology of Bubbles Moving in a Capillary Tube
Authors:
Santanu Sinha,
Alex Hansen,
Dick Bedeaux,
Signe Kjelstrup
Abstract:
We calculate the average volumetric flux versus pressure drop of bubbles moving in a single capillary tube with varying diameter, finding a square-root relation from map** the flow equations onto that of a driven overdamped pendulum. The calculation is based on a derivation of the equation of motion of a bubble train from considering the capillary forces and the entropy production associated wit…
▽ More
We calculate the average volumetric flux versus pressure drop of bubbles moving in a single capillary tube with varying diameter, finding a square-root relation from map** the flow equations onto that of a driven overdamped pendulum. The calculation is based on a derivation of the equation of motion of a bubble train from considering the capillary forces and the entropy production associated with the viscous flow. We also calculate the configurational probability of the positions of the bubbles.
△ Less
Submitted 22 August, 2012;
originally announced August 2012.
