-
Opportunities and Outcomes for Postdocs in Canada
Authors:
Henry Ngo,
Helen Kirk,
Toby Brown,
Tyrone E. Woods,
Gwendolyn Eadie,
Samantha Lawler,
Locke Spencer
Abstract:
Currently, postdoctoral fellow (PDF) researchers in Canada face challenges due to the precarious nature of their employment and their overall low compensation and benefits coverage. This report presents three themes, written as statements of need, to support an inclusive and thriving PDF community. These themes are the need for better terms of employment and conditions, the need for access to gran…
▽ More
Currently, postdoctoral fellow (PDF) researchers in Canada face challenges due to the precarious nature of their employment and their overall low compensation and benefits coverage. This report presents three themes, written as statements of need, to support an inclusive and thriving PDF community. These themes are the need for better terms of employment and conditions, the need for access to grants by non-permanent research staff, and the need for a sustainable PDF hiring model that considers the outcomes for the PDFs.
We make six recommendations:
R1. PDFs should be hired and compensated as skilled experts in their areas, not as trainees.
R2. Standard PDF hiring practices should be revised to be more inclusive of different life circumstances.
- R2.1 Allow PDFs the option of part-time employment.
- R2.2 Remove years-since-PhD time limits from PDF jobs.
- R2.3 Financially support PDF hires for relocation and visa expenses.
R3. CASCA should form a committee to advocate for and provide support to astronomy PDFs in Canada.
R4. CASCA should encourage universities to create offices dedicated to their PDFs.
R5. PDFs and other PhD-holding term researchers with a host institution should be able to compete for and win grants to self-fund their own research.
R6. Astronomy in Canada should hire general-purpose continuing support scientist positions instead of term PDFs to fill project or mission-specific requirements.
In short, we ask for prioritization of people over production of papers.
△ Less
Submitted 23 November, 2019;
originally announced November 2019.
-
The NuMAX Long Baseline Neutrino Factory Concept
Authors:
J-P. Delahaye,
C. M. Ankenbrandt,
S. A. Bogacz,
P. Huber,
H. G. Kirk,
D. Neuffer,
M. A. Palmer,
R. Ryne,
P. V. Snopok
Abstract:
A Neutrino Factory where neutrinos of all species are produced in equal quantities by muon decay is described as a facility at the intensity frontier for exquisite precision providing ideal conditions for ultimate neutrino studies and the ideal complement to Long Baseline Facilities like LBNF at Fermilab. It is foreseen to be built in stages with progressively increasing complexity and performance…
▽ More
A Neutrino Factory where neutrinos of all species are produced in equal quantities by muon decay is described as a facility at the intensity frontier for exquisite precision providing ideal conditions for ultimate neutrino studies and the ideal complement to Long Baseline Facilities like LBNF at Fermilab. It is foreseen to be built in stages with progressively increasing complexity and performance, taking advantage of existing or proposed facilities at an existing laboratory like Fermilab. A tentative layout based on a recirculating linac providing opportunities for considerable saving is discussed as well as its possible evolution toward a muon collider if and when requested by Physics. Tentative parameters of the various stages are presented as well as the necessary R&D to address the technological issues and demonstrate their feasibility.
△ Less
Submitted 7 May, 2018; v1 submitted 19 March, 2018;
originally announced March 2018.
-
Radiation damage and thermal shock response of carbon-fiber-reinforced materials to intense high-energy proton beams
Authors:
N. Simos,
Z. Zhong,
S. Ghose,
H. G. Kirk,
L-P Trung,
K. T. McDonald,
Z. Kotsina,
P. Nocera,
R. Assmann,
S. Redaelli,
A. Bertarelli,
E. Quaranta,
A. Rossi,
R. Zwaska,
K. Ammigan,
P. Hurh,
N. Mokhov
Abstract:
A comprehensive study on the effects of energetic protons on carbon-fiber composites and compounds under consideration for use as low-Z pion production targets in future high-power accelerators and low-impedance collimating elements for intercepting TeV-level protons at the Large Hadron Collider has been undertaken addressing two key areas, namely, thermal shock absorption and resistance to irradi…
▽ More
A comprehensive study on the effects of energetic protons on carbon-fiber composites and compounds under consideration for use as low-Z pion production targets in future high-power accelerators and low-impedance collimating elements for intercepting TeV-level protons at the Large Hadron Collider has been undertaken addressing two key areas, namely, thermal shock absorption and resistance to irradiation damage.
△ Less
Submitted 1 December, 2017;
originally announced December 2017.
-
A Staged Muon Accelerator Facility For Neutrino and Collider Physics
Authors:
Jean-Pierre Delahaye,
Charles Ankenbrandt,
Stephen Brice,
Alan David Bross,
Dmitri Denisov,
Estia Eichten,
Stephen Holmes,
Ronald Lipton,
David Neuffer,
Mark Alan Palmer,
S. Alex Bogacz,
Patrick Huber,
Daniel M. Kaplan,
Pavel Snopok,
Harold G. Kirk,
Robert B. Palmer,
Robert D. Ryne
Abstract:
Muon-based facilities offer unique potential to provide capabilities at both the Intensity Frontier with Neutrino Factories and the Energy Frontier with Muon Colliders. They rely on a novel technology with challenging parameters, for which the feasibility is currently being evaluated by the Muon Accelerator Program (MAP). A realistic scenario for a complementary series of staged facilities with in…
▽ More
Muon-based facilities offer unique potential to provide capabilities at both the Intensity Frontier with Neutrino Factories and the Energy Frontier with Muon Colliders. They rely on a novel technology with challenging parameters, for which the feasibility is currently being evaluated by the Muon Accelerator Program (MAP). A realistic scenario for a complementary series of staged facilities with increasing complexity and significant physics potential at each stage has been developed. It takes advantage of and leverages the capabilities already planned for Fermilab, especially the strategy for long-term improvement of the accelerator complex being initiated with the Proton Improvement Plan (PIP-II) and the Long Baseline Neutrino Facility (LBNF). Each stage is designed to provide an R&D platform to validate the technologies required for subsequent stages. The rationale and sequence of the staging process and the critical issues to be addressed at each stage, are presented.
△ Less
Submitted 5 February, 2015;
originally announced February 2015.
-
Enabling Intensity and Energy Frontier Science with a Muon Accelerator Facility in the U.S.: A White Paper Submitted to the 2013 U.S. Community Summer Study of the Division of Particles and Fields of the American Physical Society
Authors:
J-P. Delahaye,
C. Ankenbrandt,
A. Bogacz,
S. Brice,
A. Bross,
D. Denisov,
E. Eichten,
P. Huber,
D. M. Kaplan,
H. Kirk,
R. Lipton,
D. Neuffer,
M. A. Palmer,
R. Palmer,
R. Ryne,
P. Snopok
Abstract:
A staged approach towards muon based facilities for Intensity and Energy Frontier science, building upon existing and proposed facilities at Fermilab, is presented. At each stage, a facility exploring new physics also provides an R&D platform to validate the technology needed for subsequent stages. The envisioned program begins with nuSTORM, a sensitive sterile neutrino search which also provides…
▽ More
A staged approach towards muon based facilities for Intensity and Energy Frontier science, building upon existing and proposed facilities at Fermilab, is presented. At each stage, a facility exploring new physics also provides an R&D platform to validate the technology needed for subsequent stages. The envisioned program begins with nuSTORM, a sensitive sterile neutrino search which also provides precision neutrino cross-section measurements while develo** the technology of using and cooling muons. A staged Neutrino Factory based upon Project X, sending beams towards the Sanford Underground Research Facility (SURF), which will house the LBNE detector, could follow for detailed exploration of neutrino properties at the Intensity Frontier, while also establishing the technology of using intense bunched muon beams. The complex could then evolve towards Muon Colliders, starting at 126 GeV with measurements of the Higgs resonance to sub-MeV precision, and continuing to multi-TeV colliders for the exploration of physics beyond the Standard Model at the Energy Frontier. An Appendix addresses specific questions raised by the Lepton Colliders subgroup of the CSS2013 Frontier Capabilities Study Group.
△ Less
Submitted 3 January, 2014; v1 submitted 2 August, 2013;
originally announced August 2013.
-
Project X: Physics Opportunities
Authors:
Andreas S. Kronfeld,
Robert S. Tschirhart,
Usama Al-Binni,
Wolfgang Altmannshofer,
Charles Ankenbrandt,
Kaladi Babu,
Sunanda Banerjee,
Matthew Bass,
Brian Batell,
David V. Baxter,
Zurab Berezhiani,
Marc Bergevin,
Robert Bernstein,
Sudeb Bhattacharya,
Mary Bishai,
Thomas Blum,
S. Alex Bogacz,
Stephen J. Brice,
Joachim Brod,
Alan Bross,
Michael Buchoff,
Thomas W. Burgess,
Marcela Carena,
Luis A. Castellanos,
Subhasis Chattopadhyay
, et al. (111 additional authors not shown)
Abstract:
Part 2 of "Project X: Accelerator Reference Design, Physics Opportunities, Broader Impacts". In this Part, we outline the particle-physics program that can be achieved with Project X, a staged superconducting linac for intensity-frontier particle physics. Topics include neutrino physics, kaon physics, muon physics, electric dipole moments, neutron-antineutron oscillations, new light particles, had…
▽ More
Part 2 of "Project X: Accelerator Reference Design, Physics Opportunities, Broader Impacts". In this Part, we outline the particle-physics program that can be achieved with Project X, a staged superconducting linac for intensity-frontier particle physics. Topics include neutrino physics, kaon physics, muon physics, electric dipole moments, neutron-antineutron oscillations, new light particles, hadron structure, hadron spectroscopy, and lattice-QCD calculations. Part 1 is available as arXiv:1306.5022 [physics.acc-ph] and Part 3 is available as arXiv:1306.5024 [physics.acc-ph].
△ Less
Submitted 1 October, 2016; v1 submitted 20 June, 2013;
originally announced June 2013.
-
Studies of material properties under irradiation at BNL Linear Isotope Producer (BLIP)
Authors:
N. Simos,
H. Kirk,
H. Ludewig,
N. Mokhov,
P. Hurh,
J. Misek
Abstract:
Effects of proton beams irradiating materials considered for targets in high-power accelerator experiments have been under study using the Brookhaven National Laboratory's (BNL) 200 MeV Linac. The primary objectives of the study that includes a wide array of materials and alloys ranging between low and high-Z are to (a) observe changes in physio-mechanical properties which are important in maintai…
▽ More
Effects of proton beams irradiating materials considered for targets in high-power accelerator experiments have been under study using the Brookhaven National Laboratory's (BNL) 200 MeV Linac. The primary objectives of the study that includes a wide array of materials and alloys ranging between low and high-Z are to (a) observe changes in physio-mechanical properties which are important in maintaining high-power target functionality, (b) identify possible limits of proton flux or fluence above which certain material seize to maintain integrity, (c) study the role of material operating temperature in inducing or maintaining radiation damage reversal, and (d) correlate radiation damage effects of different species such as energetic protons and neutrons on materials by utilizing reactor and particle accelerator experience data. These objectives are specifically being addressed in the latest material irradiation study linked to the Long Baseline Neutrino Experiment (LBNE). Observations on irradiation effects on materials considered for high-power targets and other beam intercepting elements, such as collimators, from past studies and preliminary observations of the ongoing LBNE study are presented in this paper.
△ Less
Submitted 16 February, 2012;
originally announced February 2012.
-
MICE: the Muon Ionization Cooling Experiment. Step I: First Measurement of Emittance with Particle Physics Detectors
Authors:
U. Bravar,
M. Bogomilov,
Y. Karadzhov,
D. Kolev,
I. Russinov,
R. Tsenov,
L. Wang,
F. Y. Xu,
S. X. Zheng,
R. Bertoni,
M. Bonesini,
R. Mazza,
V. Palladino,
G. Cecchet,
A. de Bari,
M. Capponi,
A. Iaciofano,
D. Orestano,
F. Pastore,
L. Tortora,
S. Ishimoto,
S. Suzuki,
K. Yoshimura,
Y. Mori,
Y. Kuno
, et al. (123 additional authors not shown)
Abstract:
The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with…
▽ More
The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with time-of-flight and Cherenkov detectors to ensure a pure muon beam. The emittance of the incoming beam will be measured in the upstream magnetic spectrometer with a scintillating fiber tracker. A cooling cell will then follow, alternating energy loss in Liquid Hydrogen (LH2) absorbers to RF cavity acceleration. A second spectrometer, identical to the first, and a second muon identification system will measure the outgoing emittance. In the 2010 run at RAL the muon beamline and most detectors were fully commissioned and a first measurement of the emittance of the muon beam with particle physics (time-of-flight) detectors was performed. The analysis of these data was recently completed and is discussed in this paper. Future steps for MICE, where beam emittance and emittance reduction (cooling) are to be measured with greater accuracy, are also presented.
△ Less
Submitted 30 July, 2013; v1 submitted 9 October, 2011;
originally announced October 2011.
-
Open Cavity Solutions to the rf in Magnetic Field Problem
Authors:
R. Palmer,
J. Scott Berg,
R. Fernow,
J. C. gallardo,
H. Kirk
Abstract:
It has been observed \cite{break} that breakdown in an 805 MHz pill-box cavi ty occurs at much lower gradients as an external axial magnetic field is inc reased. This effect was not observed with on open iris cavity. It is propose d that this effect depends on the relative angles of the magnetic and maximu m electric fields: parallel in the pill-box case; at an angle in the open ir is case. If s…
▽ More
It has been observed \cite{break} that breakdown in an 805 MHz pill-box cavi ty occurs at much lower gradients as an external axial magnetic field is inc reased. This effect was not observed with on open iris cavity. It is propose d that this effect depends on the relative angles of the magnetic and maximu m electric fields: parallel in the pill-box case; at an angle in the open ir is case. If so, using an open iris structure with solenoid coils in the iris es should perform even better. A lattice, using this principle, is presented, for use in 6D cooling for a Muon Collider. Experimental layouts to test th is principle are proposed.
△ Less
Submitted 29 November, 2007;
originally announced November 2007.
-
A Complete Scheme of Ionization Cooling for a Muon Collider
Authors:
Robert B. Palmer,
J. Scott Berg,
Richard C. Fernow,
Juan Carlos Gallardo,
Harold G. Kirk,
Yuri Alexahin,
David Neuffer,
Stephen Alan Kahn,
Don Summers
Abstract:
A complete scheme for production and cooling a muon beam for three specified muon colliders is presented. Parameters for these muon colliders are given. The scheme starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Emittance exchange cooling in slow helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains…
▽ More
A complete scheme for production and cooling a muon beam for three specified muon colliders is presented. Parameters for these muon colliders are given. The scheme starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Emittance exchange cooling in slow helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further slow helical lattices. Final transverse cooling to the required parameters is achieved in 50 T solenoids using high Tc superconductor at 4 K. Preliminary simulations of each element are presented.
△ Less
Submitted 27 November, 2007;
originally announced November 2007.
-
A Complete Scheme for a Muon Collider
Authors:
Robert B. Palmer,
J. Scott Berg,
Richard C. Fernow,
Juan Carlos Gallardo,
Harold G. Kirk,
; Yuri Alexahin,
David Neuffer,
; Stephen Alan Kahn,
; Don J. Summers
Abstract:
A complete scheme for production, cooling, acceleration, and ring for a 1.5 TeV center of mass muon collider is presented, together with parameters for two higher energy machines. The schemes starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Six dimensional cooling in long-period helical lattices reduces the longitudinal emittance until it beco…
▽ More
A complete scheme for production, cooling, acceleration, and ring for a 1.5 TeV center of mass muon collider is presented, together with parameters for two higher energy machines. The schemes starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Six dimensional cooling in long-period helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further helical lattices. Final transverse cooling to the required parameters is achieved in 50 T solenoids.
△ Less
Submitted 18 September, 2007;
originally announced September 2007.
-
Plasma Lens for Us Based Super Neutrino Beam at Either FNAL or BNL
Authors:
A. Hershcovitch,
W. Weng,
M. Diwan,
J. Gallardo,
H. Kirk,
B. Johnson,
S. Kahn,
E. Garate,
A. Van Drie
Abstract:
The plasma lens concept is examined as an alternative to focusing horns and solenoids for a neutrino beam facility. The concept is based on a combined high-current lens/target configuration. Current is fed at an electrode located downstream from the beginning of the target where pion capturing is needed. The current is carried by plasma outside the target. A second plasma lens section, with an a…
▽ More
The plasma lens concept is examined as an alternative to focusing horns and solenoids for a neutrino beam facility. The concept is based on a combined high-current lens/target configuration. Current is fed at an electrode located downstream from the beginning of the target where pion capturing is needed. The current is carried by plasma outside the target. A second plasma lens section, with an additional current feed, follows the target. The plasma is immersed in a relatively small solenoidal magnetic field to facilitate its current profile sha** to optimize pion capture. Simulations of the not yet fully optimized configuration yielded a 25% higher neutrino flux at a detector situated at 3 km from the target than the horn system for the entire energy spectrum and a factor of 2.5 higher flux for neutrinos with energy larger than 3 GeV. A major advantage of plasma lenses is in background reduction. In antineutrino operation, neutrino background is reduced by a factor of close to 3 for the whole spectrum, and for energy larger than 3 GeV, neutrino background is reduced by a factor of 3.6. Plasma lenses have additional advantages: larger axial currents, high signal purity: minimal neutrino background in antineutrino runs. The lens medium consists of plasma, consequently, particle absorption and scattering is negligible. Withstanding high mechanical and thermal stresses in a plasma is not an issue.
△ Less
Submitted 11 July, 2007;
originally announced July 2007.
-
A Cost-Effective Design for a Neutrino Factory
Authors:
J. S. Berg,
S. A. Bogacz,
S. Caspi,
J. Cobb,
R. C. Fernow,
J. C. Gallardo,
S. Kahn,
H. Kirk,
D. Neuffer,
R. B. Palmer,
K. Paul,
H. Witte,
M. Zisman
Abstract:
There have been active efforts in the U.S., Europe, and Japan on the design of a Neutrino Factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high energy storage ring. In the U.S., a second detailed Feasibility Study (FS2) for a Neutrino Factory was completed in 2001. Since that report was published, new ideas in bunching, cooling and acceleration of m…
▽ More
There have been active efforts in the U.S., Europe, and Japan on the design of a Neutrino Factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high energy storage ring. In the U.S., a second detailed Feasibility Study (FS2) for a Neutrino Factory was completed in 2001. Since that report was published, new ideas in bunching, cooling and acceleration of muon beams have been developed. We have incorporated these ideas into a new facility design, which we designate as Study 2B (ST2B), that should lead to significant cost savings over the FS2 design.
△ Less
Submitted 10 November, 2005;
originally announced November 2005.
-
6D Ionization Muon Cooling with Tabletop Rings
Authors:
D. J. Summers,
S. B. Bracker,
L. M. Cremaldi,
R. Godang,
D. B. Cline,
A. A. Garren,
G. G. Hanson,
A. Klier,
S. A. Kahn,
H. G. Kirk,
R. B. Palmer
Abstract:
Progress on six dimensional ionization muon cooling with relatively small rings of magnets is described. Lattices being explored include scaling sector cyclotrons with edge focusing and strong focusing, fixed field alternating gradient (FFAG) rings. Ionization cooling is provided by high pressure hydrogen gas which removes both transverse and longitudinal momentum. Lost longitudinal momentum is…
▽ More
Progress on six dimensional ionization muon cooling with relatively small rings of magnets is described. Lattices being explored include scaling sector cyclotrons with edge focusing and strong focusing, fixed field alternating gradient (FFAG) rings. Ionization cooling is provided by high pressure hydrogen gas which removes both transverse and longitudinal momentum. Lost longitudinal momentum is replaced using radio frequency (RF) cavities, giving a net transverse emittance reduction. The longer path length in the hydrogen of higher momentum muons decreases longitudinal emittance at the expense of transverse emittance. Thus emittance exchange allows these rings to cool in all six dimensions and not just transversely. Alternatively, if the RF is located after the ring, it may be possible to cool the muons by stop** them as they spiral adiabatically into a central swarm. As momentum goes to zero, the momentum spread goes to zero. The resulting cooled muons can lead to an intense muon beam which could be a source for neutrino factories or muon colliders.
△ Less
Submitted 17 January, 2005; v1 submitted 13 January, 2005;
originally announced January 2005.
-
Muon Collider Design
Authors:
R. Palmer,
A. Sessler,
A. Skrinsky,
A. Tollestrup,
A. Baltz,
S. Caspi,
P. Chen,
W-H. Cheng,
Y. Cho,
D. Cline,
E. Courant,
R. Fernow,
J. Gallardo,
A. Garren,
H. Gordon,
M. Green,
R. Gupta,
A. Hershcovitch,
C. Johnstone,
S. Kahn,
H. Kirk,
T. Kycia,
Y. Lee,
D. Lissauer,
A. Luccio
, et al. (34 additional authors not shown)
Abstract:
Muon Colliders have unique technical and physics advantages and disadvantages when compared with both hadron and electron machines. They should thus be regarded as complementary. Parameters are given of 4 TeV and 0.5 TeV high luminosity μ^+ μ^- colliders, and of a 0.5 TeV lower luminosity demonstration machine. We discuss the various systems in such muon colliders, starting from the proton accel…
▽ More
Muon Colliders have unique technical and physics advantages and disadvantages when compared with both hadron and electron machines. They should thus be regarded as complementary. Parameters are given of 4 TeV and 0.5 TeV high luminosity μ^+ μ^- colliders, and of a 0.5 TeV lower luminosity demonstration machine. We discuss the various systems in such muon colliders, starting from the proton accelerator needed to generate the muons and proceeding through muon cooling, acceleration and storage in a collider ring. Detector background, polarization, and nonstandard operating conditions are discussed.
△ Less
Submitted 9 April, 1996;
originally announced April 1996.
-
Beam Dynamics problems in a muon collider
Authors:
R. B. Palmer,
J. C. Gallardo,
R. C. Fernow,
H. Kirk,
I. Stumer,
Y. Y. Lee,
M. Syphers,
Y. Torun,
D. Winn,
D. Neuffer,
Y. Cho,
J. Norem,
N. Mokhov,
R. Noble,
A. Tollestrup,
R. Scanlan,
S. Caspi,
O. Napoly
Abstract:
We discuss the various beam dynamics problems in muon collider systems, starting from the proton accelerator needed to generate the muon beams and proceeding through the muon storage ring.
We discuss the various beam dynamics problems in muon collider systems, starting from the proton accelerator needed to generate the muon beams and proceeding through the muon storage ring.
△ Less
Submitted 30 March, 1995;
originally announced March 1995.
