-
Triple decomposition and sparse representation for noisy pressure-sensitive paint data
Authors:
Koyo Kubota,
Makoto Takagi,
Tsubasa Ikami,
Yasuhiro Egami,
Hiroki Nagai,
Takahiro Kashikawa,
Koichi Kimura,
Yu Matsuda
Abstract:
Triple decomposition is a useful analytical method for extracting the mean value, organized coherent motion, and stochastic part from a fluctuating quantity. Although the pressure-sensitive paint (PSP) method is widely used to measure the pressure distribution on a surface, the PSP data measuring near atmospheric pressure contain significant noise. Here, we perform triple decomposition of noisy PS…
▽ More
Triple decomposition is a useful analytical method for extracting the mean value, organized coherent motion, and stochastic part from a fluctuating quantity. Although the pressure-sensitive paint (PSP) method is widely used to measure the pressure distribution on a surface, the PSP data measuring near atmospheric pressure contain significant noise. Here, we perform triple decomposition of noisy PSP data. To construct phase-averaged data representing an organized coherent motion, we propose a relatively simple method based on a multi-dimensional scaling plot of the cosine similarity between each PSP datum. Then, the stochastic part is extracted by selecting phase-averaged data with an appropriate phase angle based on the similarity between the measurement and phase-averaged data. As a data-driven approach, we also reconstruct the pressure distribution based on the triple decomposition and the pressure data at sparse optimal sensor positions determined from the proper orthogonal decomposition modes of the stochastic part. The optimal sensor positions are determined as a combinatorial optimization problem and are estimated using Fujitsu computing as a service digital annealer. Based on the results obtained, the root mean square error between the pressure measured by a pressure transducer and the reconstructed pressure obtained by the proposed method is small, even when the number of modes and sensor points is small. The application of PSP measurement is expected to expand further, and the framework for calculating triple decomposition and sparse representation based on the decomposition will be useful for flow analysis.
△ Less
Submitted 16 May, 2024;
originally announced May 2024.
-
Optimal standoff distance for a highly focused microjet penetrating a soft material
Authors:
Daichi Igarashi,
Kento Kimura,
Nanami Endo,
Yuto Yokoyama,
Hiroaki Kusuno,
Yoshiyuki Tagawa
Abstract:
A needle-free injector using a highly focused microjet has the potential to minimize the invasiveness of drug delivery. In this study, the jet penetration depth in a soft material-which is a critical parameter for practical needle-free injections-was investigated. We conducted jet penetration experiments by varying the inner diameter of the injection tube and the standoff distance between the meni…
▽ More
A needle-free injector using a highly focused microjet has the potential to minimize the invasiveness of drug delivery. In this study, the jet penetration depth in a soft material-which is a critical parameter for practical needle-free injections-was investigated. We conducted jet penetration experiments by varying the inner diameter of the injection tube and the standoff distance between the meniscus surface and the soft material. Interestingly, the results showed that the penetration depths peaked at certain distances from the meniscus, and the positions shifted further away as the inner diameter was increased. By analyzing the velocity distribution of the microjet, the peak positions of the penetration depth and the maximum velocities were inconsistent due to the effects of the jet shape. To account for this, we introduce the concept of the 'jet pressure impulse', a physical quantity that unifies the velocity and jet shape. However, direct estimation of this parameter from experimental data is challenging due to limitations in spatiotemporal resolution. Therefore, we used numerical simulations to replicate the experimental conditions and calculate the jet pressure impulse. Remarkably, the results show that the jet pressure impulse has peak values, which is consistent with the penetration depth. In addition, there is a correlation between the magnitude of the jet pressure impulse and the penetration depth, highlighting its importance as a key parameter. This study underlines the importance of the jet pressure impulse in controlling the penetration depth of a focused microjet, providing valuable insights for the practical use of needle-free injection techniques.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Clustering Method for Time-Series Images Using Quantum-Inspired Computing Technology
Authors:
Tomoki Inoue,
Koyo Kubota,
Tsubasa Ikami,
Yasuhiro Egami,
Hiroki Nagai,
Takahiro Kashikawa,
Koichi Kimura,
Yu Matsuda
Abstract:
Time-series clustering serves as a powerful data mining technique for time-series data in the absence of prior knowledge about clusters. A large amount of time-series data with large size has been acquired and used in various research fields. Hence, clustering method with low computational cost is required. Given that a quantum-inspired computing technology, such as a simulated annealing machine,…
▽ More
Time-series clustering serves as a powerful data mining technique for time-series data in the absence of prior knowledge about clusters. A large amount of time-series data with large size has been acquired and used in various research fields. Hence, clustering method with low computational cost is required. Given that a quantum-inspired computing technology, such as a simulated annealing machine, surpasses conventional computers in terms of fast and accurately solving combinatorial optimization problems, it holds promise for accomplishing clustering tasks that are challenging to achieve using existing methods. This study proposes a novel time-series clustering method that leverages an annealing machine. The proposed method facilitates an even classification of time-series data into clusters close to each other while maintaining robustness against outliers. Moreover, its applicability extends to time-series images. We compared the proposed method with a standard existing method for clustering an online distributed dataset. In the existing method, the distances between each data are calculated based on the Euclidean distance metric, and the clustering is performed using the k-means++ method. We found that both methods yielded comparable results. Furthermore, the proposed method was applied to a flow measurement image dataset containing noticeable noise with a signal-to-noise ratio of approximately 1. Despite a small signal variation of approximately 2%, the proposed method effectively classified the data without any overlap among the clusters. In contrast, the clustering results by the standard existing method and the conditional image sampling (CIS) method, a specialized technique for flow measurement data, displayed overlap** clusters. Consequently, the proposed method provides better results than the other two methods, demonstrating its potential as a superior clustering method.
△ Less
Submitted 18 July, 2023; v1 submitted 26 May, 2023;
originally announced May 2023.
-
Non-destructive visualization of short circuits in lithium-ion batteries by magnetic field imaging system
Authors:
Shogo Suzuki,
Hideaki Okada,
Kai Yabumoto,
Seiju Matsuda,
Yuki Mima,
Noriaki Kimura,
Kenjiro Kimura
Abstract:
To develop a high-density and long-life lithium-ion battery, a technology is needed that allows non-destructive visualization of the spatial distribution of deteriorated parts after cycle test. In the present study, we measured the distribution of the magnetic field leaking from the lithium-ion battery during its operation. Based on the measurement results, we evaluated the current density distrib…
▽ More
To develop a high-density and long-life lithium-ion battery, a technology is needed that allows non-destructive visualization of the spatial distribution of deteriorated parts after cycle test. In the present study, we measured the distribution of the magnetic field leaking from the lithium-ion battery during its operation. Based on the measurement results, we evaluated the current density distribution inside a battery using the electric current reconstruction process. With respect to the changes in an internal state of the lithium-ion battery associated with cycle deterioration, we successfully visualized the spatial changes in the conductivity distribution inside the lithium-ion battery.
△ Less
Submitted 9 October, 2020;
originally announced October 2020.
-
Towards Inclusive Practices with Indigenous Knowledge
Authors:
Aparna Venkatesan,
David Begay,
Adam J. Burgasser,
Isabel Hawkins,
Ka'iu Kimura,
Nancy Maryboy,
Laura Peticolas
Abstract:
Astronomy across world cultures is rooted in Indigenous Knowledge. We share models of partnering with indigenous communities involving Collaboration with Integrity to co-create an inclusive scientific enterprise on Earth and in space.
Astronomy across world cultures is rooted in Indigenous Knowledge. We share models of partnering with indigenous communities involving Collaboration with Integrity to co-create an inclusive scientific enterprise on Earth and in space.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Indigenous Astronomy: Best Practices and Protocols for Including Indigenous Astronomy in the Planetarium Setting
Authors:
Annette S. Lee,
Nancy Maryboy,
David Begay,
Wilfred Buck,
Yasmin Catricheo,
Duane Hamacher,
Jarita Holbrook,
Kaiu Kimura,
Carola Knockwood,
Te Kahuratai Painting,
Milagros Varguez
Abstract:
Indigenous people have nurtured critical relationships with the stars, from keen observation and sustainable engineering to place-based ceremony, navigation, and celestial architecture for tens of thousands of years. The Indigenous relationship and knowledge of the sky is exceptional in that it encompasses mind, body, heart, and spirit.
This panel is organized by the IPS's newly formed Indigenou…
▽ More
Indigenous people have nurtured critical relationships with the stars, from keen observation and sustainable engineering to place-based ceremony, navigation, and celestial architecture for tens of thousands of years. The Indigenous relationship and knowledge of the sky is exceptional in that it encompasses mind, body, heart, and spirit.
This panel is organized by the IPS's newly formed Indigenous Astronomy Working Group. It brings together Planetarium Professionals, Indigenous Star Knowledge Keepers, Indigenous Astronomy experts, Cultural Astronomers, and allies of Indigenous STEM communities from Canada, U.S., and internationally to discuss best practices for dissemination of indigenous astronomy specifically for science communicators and the planetarium community.
△ Less
Submitted 12 August, 2020;
originally announced August 2020.
-
Tackling the challenge of a huge materials science search space with quantum-inspired annealing
Authors:
Kan Hatakeyama-Sato,
Takahiro Kashikawa,
Koichi Kimura,
Kenichi Oyaizu
Abstract:
Efficient screening of chemicals is essential for exploring new materials. However, the search space is astronomically large, making calculations with conventional computers infeasible. For example, an $N$-component system of organic molecules generates >$10^{60N}$ candidates. Here, a quantum-inspired annealing machine is used to tackle the challenge of the large search space. The prototype system…
▽ More
Efficient screening of chemicals is essential for exploring new materials. However, the search space is astronomically large, making calculations with conventional computers infeasible. For example, an $N$-component system of organic molecules generates >$10^{60N}$ candidates. Here, a quantum-inspired annealing machine is used to tackle the challenge of the large search space. The prototype system extracts candidate chemicals and their composites with desirable parameters, such as melting temperature and ionic conductivity. The system can be at least $10^4$-$10^7$ times faster than conventional approaches. Such exponential acceleration is critical for exploring the enormous search space in virtual screening.
△ Less
Submitted 7 August, 2020;
originally announced August 2020.
-
Magnetic structure in square cupola compound Ba(TiO)Cu$_4$(PO$_4$)$_4$: a $^{31}$P NMR Study
Authors:
Riho Rästa,
Ivo Heinmaa,
Kenta Kimura,
Tsuyoshi Kimura,
Raivo Stern
Abstract:
The magnetic structure of the antiferromagnetic square cupola compound Ba(TiO)Cu$_4$(PO$_4$)$_4$ with the tetragonal structure is studied with 31P nuclear magnetic resonance techniques. The magnetic hyperfine shift K shows a clear splitting at the Néel temperature T$_N$ = 9.5 K, where the resonance splits into two lines when an external magnetic field is oriented along the c axis and into four lin…
▽ More
The magnetic structure of the antiferromagnetic square cupola compound Ba(TiO)Cu$_4$(PO$_4$)$_4$ with the tetragonal structure is studied with 31P nuclear magnetic resonance techniques. The magnetic hyperfine shift K shows a clear splitting at the Néel temperature T$_N$ = 9.5 K, where the resonance splits into two lines when an external magnetic field is oriented along the c axis and into four lines when the field is along the a axis. In the paramagnetic region K(T) follows temperature dependence of the magnetic susceptibility $χ(T)$. From K vs $χ$ plot we determined nearly isotropic hyperfine field values Ha_hf = 765 mT/$μ_B$ and Hc_hf = 740 mT/$μ_B$ for the magnetic field oriented along a and c, respectively. From the rotation of the single crystal in the external magnetic field we determined eight different orientations of K-tensor in the paramagnetic region. In the antiferromagnetic state at T = 6 K we found that the local field at phosphorus is mainly due to dipolar field of coppers. Here the rotation of the single crystal shows eight different orientations of the local field Bint = 35.6 mT. The orientations correspond to the calculation of dipolar fields at phosphorus assuming magnetic quadrupolar configuration of magnetic moments $\varGamma_3(1)$ described previously [Nat. Commun. 7, 13039 (2016); Phys. Rev. B 96, 214436 (2017)].
△ Less
Submitted 18 November, 2019;
originally announced November 2019.
-
Improving mixing characteristics with a pitched tip in kneading elements in twin-screw extrusion
Authors:
Yasuya Nakayama,
Hiroki Takemitsu,
Toshihisa Kajiwara,
Koichi Kimura,
Takahide Takeuchi,
Hideki Tomiyama
Abstract:
In twin-screw extrusion, the geometry of a mixing element mainly determines the basic flow pattern, which eventually affects the mixing ability as well as the dispersive ability of the mixing element. The effects of geometrical modification, with both forward and backward pitched tips, of a conventional forwarding kneading disks element (FKD) in the pitched-tip kneading disks element on the flow p…
▽ More
In twin-screw extrusion, the geometry of a mixing element mainly determines the basic flow pattern, which eventually affects the mixing ability as well as the dispersive ability of the mixing element. The effects of geometrical modification, with both forward and backward pitched tips, of a conventional forwarding kneading disks element (FKD) in the pitched-tip kneading disks element on the flow pattern and mixing characteristics are discussed. Numerical simulations of fully-filled, non-isothermal polymer melt flow in the melt-mixing zone were performed, and the flow pattern structure and the tracer trajectories were investigated. The pitched tips largely affects the inter-disc fluid transport, which is mainly responsible for mixing. These changes in the local flow pattern are analyzed by the distribution of the strain-rate state. The distribution of the finite-time Lyapunov exponent reveals a large inhomogeneity of the mixing in FKD is suppressed both by the forward and backward tips. By the forward tips on FKD, the mixing ability is relatively suppressed compared to FKD, whereas for the backward tips on FKD, the mixing ability is enhanced while maintaining the same level of dispersion efficiency as FKD. From these results, the pitched tips on the conventional KD turns out to be effective at reducing the inhomogeneity of the mixing and tuning the overall mixing performance.
△ Less
Submitted 5 November, 2018;
originally announced November 2018.
-
Anomalous diffusion analysis of the lifting events in the event-chain Monte Carlo for the classical XY models
Authors:
Kenji Kimura,
Saburo Higuchi
Abstract:
We introduce a novel random walk model that emerges in the event-chain Monte Carlo (ECMC) of spin systems. In the ECMC, the lifting variable specifying the spin to be updated changes its value to one of its interacting neighbor spins. This movement can be regarded as a random walk in a random environment with a feedback. We investigate this random walk numerically in the case of the classical XY m…
▽ More
We introduce a novel random walk model that emerges in the event-chain Monte Carlo (ECMC) of spin systems. In the ECMC, the lifting variable specifying the spin to be updated changes its value to one of its interacting neighbor spins. This movement can be regarded as a random walk in a random environment with a feedback. We investigate this random walk numerically in the case of the classical XY model in 1,2, and 3 dimensions to find that it is superdiffusive near the critical point of the underlying spin system. It is suggested that the performance improvement of the ECMC is related to this anomalous behavior.
△ Less
Submitted 1 December, 2017; v1 submitted 6 September, 2017;
originally announced September 2017.
-
Effects of pitched tips of novel kneading disks on melt mixing in twin-screw extrusion
Authors:
Yasuya Nakayama,
Nariyoshi Nishihira,
Toshihisa Kajiwara,
Hideki Tomiyama,
Takahide Takeuchi,
Koichi Kimura
Abstract:
In mixing highly viscous materials, like polymers, foods, and rubbers, the geometric structure of the mixing device is a determining factor for the quality of the mixing process. In pitched-tip kneading disks (ptKD), a novel type of mixing element, based on conventional kneading disks (KD), the tip angle is modified to change the channel geometry as well as the drag ability of KD. We discuss the e…
▽ More
In mixing highly viscous materials, like polymers, foods, and rubbers, the geometric structure of the mixing device is a determining factor for the quality of the mixing process. In pitched-tip kneading disks (ptKD), a novel type of mixing element, based on conventional kneading disks (KD), the tip angle is modified to change the channel geometry as well as the drag ability of KD. We discuss the effects of the tip angle in ptKD on mixing characteristics based on numerical simulation of the flow in the melt-mixing zone under different feed rates and a screw rotation speed. It turns out that the passage of fluid through the high-stress regions increases in ptKD compared to conventional KD regardless of the directions and sizes of the tip angle, while the fluctuation in residence time stays at the same level as the conventional KD. Furthermore, pitched tips of backward direction increase the mean applied stress on the fluid elements during its residence in the melt-mixing zone, suggesting the enhancement of dispersive mixing quality in ptKD. These understandings of the role of the tip angle on KD can give a basic guide in selecting and designing suitable angle parameters of ptKD for different mixing purposes.
△ Less
Submitted 23 December, 2016;
originally announced December 2016.
-
Orbital-selective single molecule excitation and spectroscopy based on plasmon-exciton coupling
Authors:
Hiroshi Imada,
Kuniyuki Miwa,
Miyabi Imai-Imada,
Shota Kawahara,
Kensuke Kimura,
Yousoo Kim
Abstract:
The electronic excitation of molecules triggers diverse phenomena such as luminescence and photovoltaic effects, which are the bases of various energy-converting devices. Understanding and control of the excitations at the single-molecule level are long standing targets, however, they have been hampered by the limited spatial resolution in optical probing techniques. Here we investigate the electr…
▽ More
The electronic excitation of molecules triggers diverse phenomena such as luminescence and photovoltaic effects, which are the bases of various energy-converting devices. Understanding and control of the excitations at the single-molecule level are long standing targets, however, they have been hampered by the limited spatial resolution in optical probing techniques. Here we investigate the electronic excitation of a single molecule with sub-molecular precision using a localised plasmon at the tip apex of a scanning tunnelling microscope (STM) as an excitation probe. Coherent energy transfer between the plasmon and molecular excitons is discovered when the plasmon is located in the proximity of isolated molecules, which is corroborated by a theoretical analysis. The polarised plasmonic field enables selective excitation of an electronic transition between anisotropic frontier molecular orbitals. Our findings have established the foundation of a novel single-molecule spectroscopy with STM, providing an integrated platform for real-space investigation of localised excited states.
△ Less
Submitted 9 September, 2016;
originally announced September 2016.
-
Extension of the constant exchange probability method to multi-dimensional replica exchange Monte Carlo applied to the tri-critical spin-1 Blume-Capel model
Authors:
Kenji Kimura,
Saburo Higuchi
Abstract:
In replica exchange Monte Carlo (REM), tuning of the temperature set and the exchange scheduling are crucial in improving the accuracy and reducing calculation time. In multi-dimensional simulated tempering, the first order phase transition is accessible. Therefore it is important to study the tuning of parameter set and the scheduling of exchanges in the parallel counterpart, the multi-dimensiona…
▽ More
In replica exchange Monte Carlo (REM), tuning of the temperature set and the exchange scheduling are crucial in improving the accuracy and reducing calculation time. In multi-dimensional simulated tempering, the first order phase transition is accessible. Therefore it is important to study the tuning of parameter set and the scheduling of exchanges in the parallel counterpart, the multi-dimensional REM. We extend Hukushima's constant exchange probability method to multi-dimensional REM for the parameter set. We further propose a combined method to use this set and the Bittner-Nussbaumer-Janke's PT tau algorithm for scheduling. We test the proposed method in two-dimensional spin-1 Blume-Capel model and find that it works efficiently, including the vicinity of the first order phase transition.
△ Less
Submitted 23 November, 2016; v1 submitted 21 June, 2016;
originally announced June 2016.
-
Monte Carlo estimation of the number of tatami tilings
Authors:
Kenji Kimura,
Saburo Higuchi
Abstract:
Motivated by the way Japanese tatami mats are placed on the floor, we consider domino tilings with a constraint and estimate the number of such tilings of plane regions. We map the system onto a monomer-dimer model with a novel local interaction on the dual lattice. We use a variant of the Hamiltonian replica exchange Monte Carlo method and the multi-parameter reweighting technique to study the mo…
▽ More
Motivated by the way Japanese tatami mats are placed on the floor, we consider domino tilings with a constraint and estimate the number of such tilings of plane regions. We map the system onto a monomer-dimer model with a novel local interaction on the dual lattice. We use a variant of the Hamiltonian replica exchange Monte Carlo method and the multi-parameter reweighting technique to study the model. The properties of the quantity are studied beyond exact enumeration and combinatorial method. The logarithm of the number of the tilings is linear in the boundary length of the region for all the regions studied.
△ Less
Submitted 8 March, 2016; v1 submitted 20 September, 2015;
originally announced September 2015.
-
On energy conservation in extended magnetohydrodynamics
Authors:
Keiji Kimura,
P. J. Morrison
Abstract:
A systematic study of energy conservation for extended magnetohydrodynamic (MHD) models that include Hall terms and electron inertia is performed. It is observed that commonly used models do not conserve energy in the ideal limit, i.e., when viscosity and resistivity are neglected. In particular, a term in the momentum equation that is often neglected is seen to be needed for conservation of energ…
▽ More
A systematic study of energy conservation for extended magnetohydrodynamic (MHD) models that include Hall terms and electron inertia is performed. It is observed that commonly used models do not conserve energy in the ideal limit, i.e., when viscosity and resistivity are neglected. In particular, a term in the momentum equation that is often neglected is seen to be needed for conservation of energy.
△ Less
Submitted 10 June, 2014;
originally announced June 2014.
-
A Large Hadron Electron Collider at CERN
Authors:
J. L. Abelleira Fernandez,
C. Adolphsen,
P. Adzic,
A. N. Akay,
H. Aksakal,
J. L. Albacete,
B. Allanach,
S. Alekhin,
P. Allport,
V. Andreev,
R. B. Appleby,
E. Arikan,
N. Armesto,
G. Azuelos,
M. Bai,
D. Barber,
J. Bartels,
O. Behnke,
J. Behr,
A. S. Belyaev,
I. Ben-Zvi,
N. Bernard,
S. Bertolucci,
S. Bettoni,
S. Biswal
, et al. (184 additional authors not shown)
Abstract:
This document provides a brief overview of the recently published report on the design of the Large Hadron Electron Collider (LHeC), which comprises its physics programme, accelerator physics, technology and main detector concepts. The LHeC exploits and develops challenging, though principally existing, accelerator and detector technologies. This summary is complemented by brief illustrations of s…
▽ More
This document provides a brief overview of the recently published report on the design of the Large Hadron Electron Collider (LHeC), which comprises its physics programme, accelerator physics, technology and main detector concepts. The LHeC exploits and develops challenging, though principally existing, accelerator and detector technologies. This summary is complemented by brief illustrations of some of the highlights of the physics programme, which relies on a vastly extended kinematic range, luminosity and unprecedented precision in deep inelastic scattering. Illustrations are provided regarding high precision QCD, new physics (Higgs, SUSY) and electron-ion physics. The LHeC is designed to run synchronously with the LHC in the twenties and to achieve an integrated luminosity of O(100) fb$^{-1}$. It will become the cleanest high resolution microscope of mankind and will substantially extend as well as complement the investigation of the physics of the TeV energy scale, which has been enabled by the LHC.
△ Less
Submitted 9 January, 2013; v1 submitted 20 November, 2012;
originally announced November 2012.
-
A Large Hadron Electron Collider at CERN: Report on the Physics and Design Concepts for Machine and Detector
Authors:
J. L. Abelleira Fernandez,
C. Adolphsen,
A. N. Akay,
H. Aksakal,
J. L. Albacete,
S. Alekhin,
P. Allport,
V. Andreev,
R. B. Appleby,
E. Arikan,
N. Armesto,
G. Azuelos,
M. Bai,
D. Barber,
J. Bartels,
O. Behnke,
J. Behr,
A. S. Belyaev,
I. Ben-Zvi,
N. Bernard,
S. Bertolucci,
S. Bettoni,
S. Biswal,
J. Blümlein,
H. Böttcher
, et al. (168 additional authors not shown)
Abstract:
The physics programme and the design are described of a new collider for particle and nuclear physics, the Large Hadron Electron Collider (LHeC), in which a newly built electron beam of 60 GeV, up to possibly 140 GeV, energy collides with the intense hadron beams of the LHC. Compared to HERA, the kinematic range covered is extended by a factor of twenty in the negative four-momentum squared,…
▽ More
The physics programme and the design are described of a new collider for particle and nuclear physics, the Large Hadron Electron Collider (LHeC), in which a newly built electron beam of 60 GeV, up to possibly 140 GeV, energy collides with the intense hadron beams of the LHC. Compared to HERA, the kinematic range covered is extended by a factor of twenty in the negative four-momentum squared, $Q^2$, and in the inverse Bjorken $x$, while with the design luminosity of $10^{33}$ cm$^{-2}$s$^{-1}$ the LHeC is projected to exceed the integrated HERA luminosity by two orders of magnitude. The physics programme is devoted to an exploration of the energy frontier, complementing the LHC and its discovery potential for physics beyond the Standard Model with high precision deep inelastic scattering measurements. These are designed to investigate a variety of fundamental questions in strong and electroweak interactions. The physics programme also includes electron-deuteron and electron-ion scattering in a $(Q^2, 1/x)$ range extended by four orders of magnitude as compared to previous lepton-nucleus DIS experiments for novel investigations of neutron's and nuclear structure, the initial conditions of Quark-Gluon Plasma formation and further quantum chromodynamic phenomena. The LHeC may be realised either as a ring-ring or as a linac-ring collider. Optics and beam dynamics studies are presented for both versions, along with technical design considerations on the interaction region, magnets and further components, together with a design study for a high acceptance detector. Civil engineering and installation studies are presented for the accelerator and the detector. The LHeC can be built within a decade and thus be operated while the LHC runs in its high-luminosity phase. It thus represents a major opportunity for progress in particle physics exploiting the investment made in the LHC.
△ Less
Submitted 7 September, 2012; v1 submitted 13 June, 2012;
originally announced June 2012.