Showing 1–50 of 396 results for author: Kim, D

Structural and Electrical Properties of Grafted Si/GaAsSb Heterojunction

Authors: Haris Naeem Abbasi, Seunghyun Lee, Hyemin Jung, Nathan Gajowski, Yi Lu, Linus Wang, Donghyeok Kim, Jie Zhou, Jiarui Gong, Chris Chae, **woo Hwang, Manisha Muduli, Subramanya Nookala, Zhenqiang Ma, Sanjay Krishna

Abstract: The short-wave infrared (SWIR) wavelength, especially 1.55 um, has attracted significant attention in various areas such as high-speed optical communication and LiDAR systems. Avalanche photodiodes (APDs) are a critical component as a receiver in these systems due to their internal gain which enhances the system performance. Silicon-based APDs are promising since they are CMOS compatible, but they… ▽ More The short-wave infrared (SWIR) wavelength, especially 1.55 um, has attracted significant attention in various areas such as high-speed optical communication and LiDAR systems. Avalanche photodiodes (APDs) are a critical component as a receiver in these systems due to their internal gain which enhances the system performance. Silicon-based APDs are promising since they are CMOS compatible, but they are limited in detecting 1.55 um light detection. This study proposes a p-type Si on n-type GaAs0.51Sb0.49 (GaAsSb) lattice matched to InP substrates heterojunction formed using a grafting technique for future GaAsSb/Si APD technology. A p+Si nanomembrane is transferred onto the GaAsSb/AlInAs/InP substrate, with an ultrathin ALD-Al2O3 oxide at the interface, which behaves as both double-side passivation and quantum tunneling layers. The devices exhibit excellent surface morphology and interface quality, confirmed by atomic force microscope (AFM) and transmission electron microscope (TEM). Also, the current-voltage (I-V) of the p+Si/n-GaAsSb heterojunction shows ideal rectifying characteristics with an ideality factor of 1.15. The I-V tests across multiple devices confirm high consistency and yield. Furthermore, the X-ray photoelectron spectroscopy (XPS) measurement reveals that GaAsSb and Si are found to have type-II band alignment with a conduction band offset of 50 meV which is favorable for the high-bandwidth APD application. The demonstration of the GaAsSb/Si heterojunction highlights the potential to advance current SWIR PD technologies. △ Less

Submitted 24 June, 2024; v1 submitted 20 June, 2024; originally announced June 2024.

Comments: 14 pages, 6 figures

The Design, Implementation, and Performance of the LZ Calibration Systems

Authors: J. Aalbers, D. S. Akerib, A. K. Al Musalhi, F. Alder, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, S. Balashov, J. Bang, E. E. Barillier, J. W. Bargemann, K. Beattie, T. Benson, A. Bhatti, A. Biekert, T. P. Biesiadzinski, H. J. Birch, E. Bishop, G. M. Blockinger, B. Boxer , et al. (179 additional authors not shown)

Abstract: LUX-ZEPLIN (LZ) is a tonne-scale experiment searching for direct dark matter interactions and other rare events. It is located at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. The core of the LZ detector is a dual-phase xenon time projection chamber (TPC), designed with the primary goal of detecting Weakly Interacting Massive Particles (WIMPs) via their induced low e… ▽ More LUX-ZEPLIN (LZ) is a tonne-scale experiment searching for direct dark matter interactions and other rare events. It is located at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. The core of the LZ detector is a dual-phase xenon time projection chamber (TPC), designed with the primary goal of detecting Weakly Interacting Massive Particles (WIMPs) via their induced low energy nuclear recoils. Surrounding the TPC, two veto detectors immersed in an ultra-pure water tank enable reducing background events to enhance the discovery potential. Intricate calibration systems are purposely designed to precisely understand the responses of these three detector volumes to various types of particle interactions and to demonstrate LZ's ability to discriminate between signals and backgrounds. In this paper, we present a comprehensive discussion of the key features, requirements, and performance of the LZ calibration systems, which play a crucial role in enabling LZ's WIMP-search and its broad science program. The thorough description of these calibration systems, with an emphasis on their novel aspects, is valuable for future calibration efforts in direct dark matter and other rare-event search experiments. △ Less

Submitted 20 June, 2024; v1 submitted 2 May, 2024; originally announced June 2024.

Projected background and sensitivity of AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, Seonho Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev, O. Gileva , et al. (81 additional authors not shown)

Abstract: AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap… ▽ More AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study. △ Less

Submitted 13 June, 2024; originally announced June 2024.

The Data Acquisition System of the LZ Dark Matter Detector: FADR

Authors: J. Aalbers, D. S. Akerib, A. K. Al Musalhi, F. Alder, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, A. Baker, S. Balashov, J. Bang, E. E. Barillier, J. W. Bargemann, K. Beattie, T. Benson, A. Bhatti, A. Biekert, T. P. Biesiadzinski, H. J. Birch, E. Bishop, G. M. Blockinger, B. Boxer , et al. (190 additional authors not shown)

Abstract: The Data Acquisition System (DAQ) for the LUX-ZEPLIN (LZ) dark matter detector is described. The signals from 745 PMTs, distributed across three subsystems, are sampled with 100-MHz 32-channel digitizers (DDC-32s). A basic waveform analysis is carried out on the on-board Field Programmable Gate Arrays (FPGAs) to extract information about the observed scintillation and electroluminescence signals.… ▽ More The Data Acquisition System (DAQ) for the LUX-ZEPLIN (LZ) dark matter detector is described. The signals from 745 PMTs, distributed across three subsystems, are sampled with 100-MHz 32-channel digitizers (DDC-32s). A basic waveform analysis is carried out on the on-board Field Programmable Gate Arrays (FPGAs) to extract information about the observed scintillation and electroluminescence signals. This information is used to determine if the digitized waveforms should be preserved for offline analysis. The system is designed around the Kintex-7 FPGA. In addition to digitizing the PMT signals and providing basic event selection in real time, the flexibility provided by the use of FPGAs allows us to monitor the performance of the detector and the DAQ in parallel to normal data acquisition. The hardware and software/firmware of this FPGA-based Architecture for Data acquisition and Realtime monitoring (FADR) are discussed and performance measurements are described. △ Less

Submitted 23 May, 2024; originally announced May 2024.

Comments: 18 pages, 24 figures

ETROC1: The First Full Chain Precision Timing Prototype ASIC for CMS MTD Endcap Timing Layer Upgrade

Authors: Xing Huang, Quan Sun, Datao Gong, Piljun Gwak, Doyeong Kim, Jongho Lee, Chonghan Liu, Tiankuan Liu, Tiehui Liu, Sergey Los, Sandeep Miryala, Shirsendu Nanda, Jamieson Olsen, Hanhan Sun, **yuan Wu, **gbo Ye, Zhenyu Ye, Li Zhang, Wei Zhang

Abstract: We present the design and characterization of the first full chain precision timing prototype ASIC, named ETL Readout Chip version 1 (ETROC1) for the CMS MTD endcap timing layer (ETL) upgrade. The ETL utilizes Low Gain Avalanche Diode (LGAD) sensors to detect charged particles, with the goal to achieve a time resolution of 40 - 50 ps per hit, and 30 - 40 ps per track with hits from two detector la… ▽ More We present the design and characterization of the first full chain precision timing prototype ASIC, named ETL Readout Chip version 1 (ETROC1) for the CMS MTD endcap timing layer (ETL) upgrade. The ETL utilizes Low Gain Avalanche Diode (LGAD) sensors to detect charged particles, with the goal to achieve a time resolution of 40 - 50 ps per hit, and 30 - 40 ps per track with hits from two detector layers. The ETROC1 is composed of a 5 x 5 pixel array and peripheral circuits. The pixel array includes a 4 x 4 active pixel array with an H-tree shaped network delivering clock and charge injection signals. Each active pixel is composed of various components, including a bump pad, a charge injection circuit, a pre-amplifier, a discriminator, a digital-to-analog converter, and a time-to-digital converter. These components play essential roles as the front-end link in processing LGAD signals and measuring timing-related information. The peripheral circuits provide clock signals and readout functionalities. The size of the ETROC1 chip is 7 mm x 9 mm. ETROC1 has been fabricated in a 65 nm CMOS process, and extensively tested under stimuli of charge injection, infrared laser, and proton beam. The time resolution of bump-bonded ETROC1 + LGAD chipsets reaches 42 - 46 ps per hit in the beam test. △ Less

Submitted 25 April, 2024; v1 submitted 22 April, 2024; originally announced April 2024.

Comments: 14 pages, 15 figures

Report number: FERMILAB-PUB-24-0131-CMS-PPD

Uncovering large inconsistencies between machine learning derived gridded settlement datasets

Authors: Vedran Sekara, Andrea Martini, Manuel Garcia-Herranz, Do-Hyung Kim

Abstract: High-resolution human settlement maps provide detailed delineations of where people live and are vital for scientific and practical purposes, such as rapid disaster response, allocation of humanitarian resources, and international development. The increased availability of high-resolution satellite imagery, combined with powerful techniques from machine learning and artificial intelligence, has sp… ▽ More High-resolution human settlement maps provide detailed delineations of where people live and are vital for scientific and practical purposes, such as rapid disaster response, allocation of humanitarian resources, and international development. The increased availability of high-resolution satellite imagery, combined with powerful techniques from machine learning and artificial intelligence, has spurred the creation of a wealth of settlement datasets. However, the precise agreement and alignment between these datasets is not known. Here we quantify the overlap of high-resolution settlement map for 42 African countries developed by Google (Open Buildings), Meta (High Resolution Population Maps) and GRID3 (Geo-Referenced Infrastructure and Demographic Data for Development). Across all studied countries we find large disagreement between datasets on how much area is considered settled. We demonstrate that there are considerable geographic and socio-economic factors at play and build a machine learning model to predict for which areas datasets disagree. It it vital to understand the shortcomings of AI derived high-resolution settlement layers as international organizations, governments, and NGOs are already experimenting with incorporating these into programmatic work. As such, we anticipate our work to be a starting point for more critical and detailed analyses of AI derived datasets for humanitarian, planning, policy, and scientific purposes. △ Less

Submitted 19 April, 2024; originally announced April 2024.

Comments: 14 pages, 4 figures

A Generalized Expression for Accelerating Beamlet Decomposition Simulations

Authors: Jaren N. Ashcraft, Ewan S. Douglas, Ramya Anche, Brandon D. Dube, Kevin Z. Derby, Lars Furenlid, Maggie Kautz, Daewook Kim, Kian Milani, A. J. Eldorado Riggs

Abstract: Paraxial diffraction modeling based on the Fourier transform has seen widespread implementation for simulating the response of a diffraction-limited optical system. For systems where the paraxial assumption is not sufficient, a class of algorithms has been developed that employs hybrid propagation physics to compute the propagation of an elementary beamlet along geometric ray paths. These "beamlet… ▽ More Paraxial diffraction modeling based on the Fourier transform has seen widespread implementation for simulating the response of a diffraction-limited optical system. For systems where the paraxial assumption is not sufficient, a class of algorithms has been developed that employs hybrid propagation physics to compute the propagation of an elementary beamlet along geometric ray paths. These "beamlet decomposition" algorithms include the well-known Gaussian Beamlet Decomposition (GBD) algorithm, of which several variants have been created. To increase the computational efficiency of the GBD algorithm, we derive an alternative expression of the technique that utilizes the analytical propagation of beamlets to tilted planes. We then use this accelerated algorithm to conduct a parameter-space search to find the optimal combination of free parameters in GBD to construct the analytical Airy function. The experiment is conducted on a consumer-grade CPU, and a high-performance GPU, where the new algorithm is 34 times faster than the previously published algorithm on CPUs, and 67,513 times faster on GPUs. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Comments: 19 pages, 10 figures, Accepted to Optics Express on April 18 2024

A mid-infrared Brillouin laser using ultra-high-Q on-chip resonators

Authors: Kiyoung Ko, Daewon Suk, Dohyeong Kim, Soobong Park, Betul Sen, Dae-Gon Kim, Yingying Wang, Shixun Dai, Xunsi Wang, Rong** Wang, Byung Jae Chun, Kwang-Hoon Ko, Peter T. Rakich, Duk-Yong Choi, Hansuek Lee

Abstract: Ultra-high-Q optical resonators have facilitated recent advancements in on-chip photonics by effectively harnessing nonlinear phenomena providing useful functionalities. While these breakthroughs, primarily focused on the near-infrared region, have extended interest to longer wavelengths holding importance for monitoring and manipulating molecules, the absence of ultra-high-Q resonators in this re… ▽ More Ultra-high-Q optical resonators have facilitated recent advancements in on-chip photonics by effectively harnessing nonlinear phenomena providing useful functionalities. While these breakthroughs, primarily focused on the near-infrared region, have extended interest to longer wavelengths holding importance for monitoring and manipulating molecules, the absence of ultra-high-Q resonators in this region remains a significant challenge. Here, we have developed on-chip microresonators with a remarkable Q-factor of 38 million, surpassing previous mid-infrared records by over 30 times. Employing innovative fabrication techniques, including the spontaneous formation of light-guiding geometries during material deposition, resonators with internal multilayer structures have been seamlessly created and passivated with chalcogenide glasses within a single chamber. Major loss factors, especially airborne-chemical absorption, were thoroughly investigated and mitigated by extensive optimization of resonator geometries and fabrication procedures. This allowed us to access the fundamental loss performance offered by doubly purified chalcogenide glass sources, as demonstrated in their fiber form. Exploiting this ultra-high-Q resonator, we successfully demonstrated Brillouin lasing on a chip for the first time in the mid-infrared, with a threshold power of 91.9 μW and a theoretical Schawlow-Townes linewidth of 83.45 Hz, far surpassing carrier phase noise. Our results showcase the effective integration of cavity-enhanced optical nonlinearities into on-chip mid-infrared photonics. △ Less

Submitted 10 April, 2024; originally announced April 2024.

Comments: 10 pages, 5 figures in main script, and 1 figure in methods

Upgrade of NaI(Tl) crystal encapsulation for the NEON experiment

Authors: J. J. Choi, E. J. Jeon, J. Y. Kim, K. W. Kim, S. H. Kim, S. K. Kim, Y. D. Kim, Y. J. Ko, B. C. Koh, C. Ha, B. J. Park, S. H. Lee, I. S. Lee, H. Lee, H. S. Lee, J. Lee, Y. M. Oh

Abstract: The Neutrino Elastic-scattering Observation with NaI(Tl) experiment (NEON) aims to detect coherent elastic neutrino-nucleus scattering~(\cenns) in a NaI(Tl) crystal using reactor anti-electron neutrinos at the Hanbit nuclear power plant complex. A total of 13.3 kg of NaI(Tl) crystals were initially installed in December 2020 at the tendon gallery, 23.7$\pm$0.3\,m away from the reactor core, which… ▽ More The Neutrino Elastic-scattering Observation with NaI(Tl) experiment (NEON) aims to detect coherent elastic neutrino-nucleus scattering~(\cenns) in a NaI(Tl) crystal using reactor anti-electron neutrinos at the Hanbit nuclear power plant complex. A total of 13.3 kg of NaI(Tl) crystals were initially installed in December 2020 at the tendon gallery, 23.7$\pm$0.3\,m away from the reactor core, which operates at a thermal power of 2.8\,GW. Initial engineering operation was performed from May 2021 to March 2022 and observed unexpected photomultiplier-induced noise and a decreased light yield that were caused by leakage of liquid scintillator into the detector due to weakness of detector encapsulation. We upgraded the detector encapsulation design to prevent the leakage of the liquid scintillator. Meanwhile two small-sized detectors were replaced with larger ones resulting in a total mass of 16.7\,kg. With this new design implementation, the detector system has been operating stably since April 2022 for over a year without detector gain drop. In this paper, we present an improved crystal encapsulation design and stability of the NEON experiment. △ Less

Submitted 28 June, 2024; v1 submitted 2 April, 2024; originally announced April 2024.

Technologies for Modulation of Visible and Near-UV Light and their Applications

Authors: Sanghyo Park, Milica Notaros, Aseema Mohanty, Donggyu Kim, Jelena Notaros, Sara Mouradian

Abstract: Control over the amplitude, phase, and spatial distribution of visible-spectrum light underlies many technologies, but commercial solutions remain bulky and require high control power. Recent materials and fabrication advances have spurred interest in visible-light integrated photonics. In this review, we discuss three application spaces which rely on control of visible light - quantum control and… ▽ More Control over the amplitude, phase, and spatial distribution of visible-spectrum light underlies many technologies, but commercial solutions remain bulky and require high control power. Recent materials and fabrication advances have spurred interest in visible-light integrated photonics. In this review, we discuss three application spaces which rely on control of visible light - quantum control and measurement of neutral atom and trapped-ion atomic systems, augmented-reality displays, and measurement and control of biological systems. We then review the commercial dynamic surfaces and bulk systems which currently provide visible-light modulation before discussing the current state-of-the-art integrated solutions. Throughout the review we focus on speed, control power, size, optical bandwidth, and technological maturity when comparing technologies. △ Less

Submitted 22 March, 2024; originally announced March 2024.

Quantum emitters in van der Waals α-MoO3

Authors: Jeonghan Lee, Haiyuan Wang, Keun-Yeol Park, Soonsang Huh, Donghan Kim, Mihyang Yu, Changyoung Kim, Kristian Sommer Thygesen, Jieun Lee

Abstract: Quantum emitters in solid-state materials are highly promising building blocks for quantum information processing and communication science. Recently, single-photon emission from van der Waals materials has been reported in transition metal dichalcogenides and hexagonal boron nitride, exhibiting the potential to realize photonic quantum technologies in two-dimensional materials. Here, we report th… ▽ More Quantum emitters in solid-state materials are highly promising building blocks for quantum information processing and communication science. Recently, single-photon emission from van der Waals materials has been reported in transition metal dichalcogenides and hexagonal boron nitride, exhibiting the potential to realize photonic quantum technologies in two-dimensional materials. Here, we report the observation of single-photon generation from exfoliated and thermally annealed single crystals of van der Waals α-MoO3. The second-order correlation function measurement displays a clear photon antibunching, while the luminescence intensity exceeds 100 kcounts/s and remains stable under laser excitation. Also, the zero-phonon lines of these emitters are distributed in a spectrally narrow energy range. The theoretical calculation suggests that an oxygen vacancy defect is a possible candidate for the observed emitters. Together with photostability and brightness, quantum emitters in α-MoO3 provide a new avenue to realize photon-based quantum information science in van der Waals materials. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Comments: 20 pages, 4 figures

Robust Chemiresistive Behavior in Conductive Polymer/MOF Composites

Authors: Heejung Roh, Dong-Ha Kim, Yeongsu Cho, Young-Moo Jo, Jesús A. del Alamo, Heather J. Kulik, Mircea Dincă, Aristide Gumyusenge

Abstract: Metal-organic frameworks (MOFs) are promising materials for gas sensing but are often limited to single-use detection. We demonstrate a hybridization strategy synergistically deploying conductive MOFs (cMOFs) and conductive polymers (cPs) as two complementary mixed ionic-electronic conductors in high-performing stand-alone chemiresistors. Our work presents significant improvement in i) sensor reco… ▽ More Metal-organic frameworks (MOFs) are promising materials for gas sensing but are often limited to single-use detection. We demonstrate a hybridization strategy synergistically deploying conductive MOFs (cMOFs) and conductive polymers (cPs) as two complementary mixed ionic-electronic conductors in high-performing stand-alone chemiresistors. Our work presents significant improvement in i) sensor recovery kinetics, ii) cycling stability, and iii) dynamic range at room temperature. We demonstrate the effect of hybridization across well-studied cMOFs based on 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) and 2,3,6,7,10,11-hexaiminotripphenylene (HITP) ligands with varied metal nodes (Co, Cu, Ni). We conduct a comprehensive mechanistic study to relate energy band alignments at the heterojunctions between the MOFs and the polymer with sensing thermodynamics and binding kinetics. Our findings reveal that hole enrichment of the cMOF component upon hybridization leads to selective enhancement in desorption kinetics, enabling significantly improved sensor recovery at room temperature, and thus long-term response retention. This mechanism was further supported by density functional theory calculations on sorbate-analyte interactions. We also find that alloying cPs and cMOFs enables facile thin film co-processing and device integration, potentially unlocking the use of these hybrid conductors in diverse electronic applications. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Lithographically Defined Zerogap Strain Sensors

Authors: Mahsa Haddadi Moghaddam, Zhihao Wang, Daryll J. C Dalayoan, Daehwan Park, Hwanhee Kim, Sunghoon Im, Kyungbin Ji, Daeshik Kang, Bamadev Das, Dai Sik Kim

Abstract: Metal thin films on soft polymers provide a unique opportunity for resistance-based strain sensors. A mechanical mismatch between the conductive film and the flexible substrate causes cracks to open and close, changing the electrical resistance as a function of strain. However, the very randomness of the formation, shape, length, orientation, and distance between adjacent cracks limits the sensing… ▽ More Metal thin films on soft polymers provide a unique opportunity for resistance-based strain sensors. A mechanical mismatch between the conductive film and the flexible substrate causes cracks to open and close, changing the electrical resistance as a function of strain. However, the very randomness of the formation, shape, length, orientation, and distance between adjacent cracks limits the sensing range as well as repeatability. Herein, we present a breakthrough: the Zerogap Strain Sensor, whereby lithography eliminates randomness and violent tearing process inherent in conventional crack sensors and allows for short periodicity between gaps with gentle sidewall contacts, critical in high strain sensing enabling operation over an unprecedently wide range. Our sensor achieves a gauge factor of over 15,000 at εext=18%, the highest known value. With the uniform gaps of three-to-ten thousand nanometer widths characterized by periodicity and strain, this approach has far reaching implications for future strain sensors whose range is limited only by that of the flexible substrate, with non-violent operations that always remain below the tensile limit of the metal. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Pushing single atoms near an optical cavity

Authors: Dowon Lee, Taegyu Ha, Donggeon Kim, Keumhyun Kim, Kyungwon An, Moonjoo Lee

Abstract: Optical scattering force is used to reduce the loading time of single atoms to a cavity mode. Releasing a cold atomic ensemble above the resonator, we apply a push beam along the direction of gravity, offering fast atomic transport with narrow velocity distribution. We also observe in real time that, when the push beam is illuminated against gravity, single atoms slow down and even turn around in… ▽ More Optical scattering force is used to reduce the loading time of single atoms to a cavity mode. Releasing a cold atomic ensemble above the resonator, we apply a push beam along the direction of gravity, offering fast atomic transport with narrow velocity distribution. We also observe in real time that, when the push beam is illuminated against gravity, single atoms slow down and even turn around in the mode, through the cavity-transmission measurement. Our method can be employed to make atom-cavity experiments more efficient. △ Less

Submitted 20 March, 2024; v1 submitted 5 March, 2024; originally announced March 2024.

Comments: 11 pages, 6 figures

Waveform Simulation for Scintillation Characteristics of NaI(Tl) Crystal

Authors: J. J. Choi, C. Ha, E. J. Jeon, K. W. Kim, S. K. Kim, Y. D. Kim, Y. J. Ko, B. C. Koh, H. S. Lee, S. H. Lee, S. M. Lee, B. J. Park, G. H. Yu

Abstract: The lowering of the energy threshold in the NaI detector is crucial not only for comprehensive validation of DAMA/LIBRA but also for exploring new possibilities in the search for low-mass dark matter and observing coherent elastic scattering between neutrino and nucleus. Alongside hardware enhancements, extensive efforts have focused on refining event selection to discern noise, achieved through p… ▽ More The lowering of the energy threshold in the NaI detector is crucial not only for comprehensive validation of DAMA/LIBRA but also for exploring new possibilities in the search for low-mass dark matter and observing coherent elastic scattering between neutrino and nucleus. Alongside hardware enhancements, extensive efforts have focused on refining event selection to discern noise, achieved through parameter development and the application of machine learning. Acquiring pure, unbiased datasets is crucial in this endeavor, for which a waveform simulation was developed. The simulation data were compared with the experimental data using several pulse shape discrimination parameters to test its performance in describing the experimental data. Additionally, we present the outcomes of multi-variable machine learning trained with simulation data as a scintillation signal sample. The distributions of outcomes for experimental and simulation data show a good agreement. As an application of the waveform simulation, we validate the trigger efficiency alongside estimations derived from the minimally biased measurement data. △ Less

Submitted 17 June, 2024; v1 submitted 26 February, 2024; originally announced February 2024.

Journal ref: NIM A 1065, 169489 (2024)

Measurements of low energy nuclear recoil quenching factors for Na and I recoils in the NaI(Tl) scintillator

Authors: S. H. Lee, H. W. Joo, H. J. Kim, K. W. Kim, S. K. Kim, Y. D. Kim, Y. J. Ko, H. S. Lee, J. Y. Lee, H. S. Park, Y. S. Yoon

Abstract: Elastic scattering off nuclei in target detectors, involving interactions with dark matter and coherent elastic neutrino nuclear recoil (CE$ν$NS), results in the deposition of low energy within the nuclei, dissipating rapidly through a combination of heat and ionization. The primary energy loss mechanism for nuclear recoil is heat, leading to consistently smaller measurable scintillation signals c… ▽ More Elastic scattering off nuclei in target detectors, involving interactions with dark matter and coherent elastic neutrino nuclear recoil (CE$ν$NS), results in the deposition of low energy within the nuclei, dissipating rapidly through a combination of heat and ionization. The primary energy loss mechanism for nuclear recoil is heat, leading to consistently smaller measurable scintillation signals compared to electron recoils of the same energy. The nuclear recoil quenching factor (QF), representing the ratio of scintillation light yield produced by nuclear recoil to that of electron recoil at the same energy, is a critical parameter for understanding dark matter and neutrino interactions with nuclei. The low energy QF of NaI(Tl) crystals, commonly employed in dark matter searches and CE$ν$NS measurements, is of substantial importance. Previous low energy QF measurements were constrained by contamination from photomultiplier tube (PMT)-induced noise, resulting in an observed light yield of approximately 15 photoelectrons per keVee (kilo-electron-volt electron-equivalent energy) and nuclear recoil energy above 5 keVnr (kilo-electron-volt nuclear recoil energy). Through enhanced crystal encapsulation, an increased light yield of around 26 photoelectrons per keVee is achieved. This improvement enables the measurement of the nuclear recoil QF for sodium nuclei at an energy of 3.8 $\pm$ 0.6 keVnr with a QF of 11.2 $\pm$ 1.7%. Furthermore, a reevaluation of previously reported QF results is conducted, incorporating enhancements in low energy events based on waveform simulation. The outcomes are generally consistent with various recent QF measurements for sodium and iodine. △ Less

Submitted 28 February, 2024; v1 submitted 23 February, 2024; originally announced February 2024.

Construction of Yemilab

Authors: K. S. Park, Y. D. Kim, K. M. Bang, H. K Park, M. H. Lee, J. H. Jang, J. H. Kim, J. So, S. H. Kim, S. B. Kim

Abstract: The Center for Underground Physics of the Institute for Basic Science (IBS) in Korea has been planning the construction of a deep underground laboratory since 2013 to search for extremely rare interactions such as dark matter and neutrinos. In September 2022, a new underground laboratory, Yemilab, was finally completed in Jeongseon, Gangwon Province, with a depth of 1,000 m and an exclusive experi… ▽ More The Center for Underground Physics of the Institute for Basic Science (IBS) in Korea has been planning the construction of a deep underground laboratory since 2013 to search for extremely rare interactions such as dark matter and neutrinos. In September 2022, a new underground laboratory, Yemilab, was finally completed in Jeongseon, Gangwon Province, with a depth of 1,000 m and an exclusive experimental area spanning 3,000 m$^3$. The tunnel is encased in limestone and accommodates 17 independent experimental spaces. Over two years, from 2023 to 2024, the Yangyang Underground Laboratory facilities will be relocated to Yemilab. Preparations are underway for the AMoRE-II, a neutrinoless double beta decay experiment, scheduled to begin in Q2 2024 at Yemilab. Additionally, Yemilab includes a cylindrical pit with a volume of approximately 6,300 m$^3$, designed as a multipurpose laboratory for next-generation experiments involving neutrinos, dark matter, and related research. This article provides a focused overview of the construction and structure of Yemilab. △ Less

Submitted 21 February, 2024; originally announced February 2024.

Comments: 12 pages, 3 figures, 1 table

Journal ref: Frontiers in Physics, vol. 12, 1323991 (2024)

Scaling behavior of the degree of circular polarization of surface plasmon polariton

Authors: Dongha Kim, Donghyeong Kim, Sanghyeok Park, N. Asger Mortensen, Min-Kyo Seo

Abstract: Surface plasmon polaritons (SPPs) carry transverse optical spin within the evanescent field, which has enabled the demonstration of various chiral light-matter interactions in classical and quantum systems. To achieve high spin selectivity in the interactions, the elliptical polarization of the evanescent field should be made circular, but the engineering principle of the degree of circular polari… ▽ More Surface plasmon polaritons (SPPs) carry transverse optical spin within the evanescent field, which has enabled the demonstration of various chiral light-matter interactions in classical and quantum systems. To achieve high spin selectivity in the interactions, the elliptical polarization of the evanescent field should be made circular, but the engineering principle of the degree of circular polarization (DOCP) of SPPs has been lacking. In this study, we theoretically and numerically investigate the scaling behavior of the DOCP of the SPP field with respect to the modal effective refractive index (neff). The DOCP of the SPP field exhibits power-law scalability to the effective refractive index in the 1D layered system, regardless of the material, structural geometry, and excitation wavelength. The power-law scalability is also confirmed in 2D waveguide structures for in-plane and out-of-plane SPP fields, but the scaling exponents vary depending on the distance from the waveguide boundaries by the reduced symmetry of the given system. Due to Lorentz reciprocity, the power-law scalability can be extended to the coupling directionality of chiral emitters towards the plasmonic waveguide. To this end, we propose a chiral photonic platform for enhanced light-valley interaction, which utilizes simultaneous enhancement of the DOCP and coupling directionality. An incident SPP can excite a chiral emitter with high spin selectivity that unidirectionally couples the emitted light into the plasmonic waveguide depending on the valley polarization of excitons in 2D material. Our work provides a ground rule for designing chiral nanophotonic systems and paves the way for the exploration of scale-free phenomena of electromagnetic waves. △ Less

Submitted 13 February, 2024; originally announced February 2024.

Journal ref: ACS Photonics 11, 2379 (2024)

Do** Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon do** can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

Hyperphosphorylation-Induced Phase Transition in Vesicle Delivery Dynamics of Motor Proteins in Neuronal Cells

Authors: Eunsang Lee, Donghee Kim, Yo Han Song, Kyu** Shin, Sanggeun Song, Minho Lee, Yeongchang Goh, Mi Hee Lim, Ji-Hyun Kim, Jaeyoung Sung, Kang Taek Lee

Abstract: Synaptic vesicle transport by motor proteins along microtubules is a crucial active process underlying neuronal communication. It is known that microtubules are destabilized by tau-hyperphosphorylation, which causes tau proteins to detach from microtubules and form neurofibril tangles. However, how tau-phosphorylation affects transport dynamics of motor proteins on the microtubule remains unknown.… ▽ More Synaptic vesicle transport by motor proteins along microtubules is a crucial active process underlying neuronal communication. It is known that microtubules are destabilized by tau-hyperphosphorylation, which causes tau proteins to detach from microtubules and form neurofibril tangles. However, how tau-phosphorylation affects transport dynamics of motor proteins on the microtubule remains unknown. Here, we discover that long-distance unidirectional motion of vesicle-motor protein multiplexes (VMPMs) in living cells is suppressed under tau-hyperphosphorylation, with the consequent loss of fast vesicle-transport along the microtubule. The VMPMs in hyperphosphorylated cells exhibit seemingly bidirectional random motion, with dynamic properties far different from VMPM motion in normal cells. We establish a parsimonious physicochemical model of VMPM's active motion that provides a unified, quantitative explanation and predictions for our experimental results. Our analysis reveals that, under hyperphosphorylation conditions, motor-protein-multiplexes have both static and dynamic motility fluctuations. The loss of the fast vesicle-transport along the microtubule can be a mechanism of neurodegenerative disorders associated with tau-hyperphosphorylation. △ Less

Submitted 23 April, 2024; v1 submitted 27 January, 2024; originally announced January 2024.

Maximum plasmon thermal conductivity of a thin metal film

Authors: Kuk Hyun Yun, Dong-min Kim, Bong Jae Lee

Abstract: Due to their extremely long propagation lengths compared to the wavelengths, surface plasmon polaritons (SPPs) have been considered as a key in enhancing thermal conductivity in thin metal films. This study explores the conditions at which the plasmon thermal conductivity is maximized, considering the thickness-dependent metal permittivity. We derived the analytical solutions for the plasmon therm… ▽ More Due to their extremely long propagation lengths compared to the wavelengths, surface plasmon polaritons (SPPs) have been considered as a key in enhancing thermal conductivity in thin metal films. This study explores the conditions at which the plasmon thermal conductivity is maximized, considering the thickness-dependent metal permittivity. We derived the analytical solutions for the plasmon thermal conductivity in both the thin-film and thick-film limits to analyze the effect of the permittivities of metals and substrates. From the analytical solutions of plasmon thermal conductivity, we deduced that the plasmon thermal conductivity is proportional to the electron thermal conductivity based on the Wiedemann-Franz law. Additionally, we analyzed the conditions where the enhancement ratio of the thermal conductivity via SPPs is maximized. Metals with high plasma frequency and low dam** coefficient are desirable for achieving the maximum plasmon thermal conductivity as well as the maximum enhancement ratio of thermal conductivity among metals. Significantly, 10-cm-long and 14-nm-thick Al film demonstrates most superior in-plane heat transfer via SPPs, showing a 53.5\% enhancement in thermal conductivity compared to its electron thermal counterpart on a lossless glass substrate. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: 4 figures

Journal ref: Phys. Rev. B 109, 165415, 2024

Optimal multiple-phase estimation with multi-mode NOON states against photon loss

Authors: Min Namkung, Dong-Hyun Kim, Seong** Hong, Yong-Su Kim, Changhyoup Lee, Hyang-Tag Lim

Abstract: Multi-mode NOON states can quantum-enhance multiple-phase estimation in the absence of photon loss. However, a multi-mode NOON state is known to be vulnerable to photon loss, and its quantum-enhancement can be dissipated by lossy environment. In this work, we demonstrate that a quantum advantage in estimate precision can still be achieved in the presence of photon loss. This is accomplished by opt… ▽ More Multi-mode NOON states can quantum-enhance multiple-phase estimation in the absence of photon loss. However, a multi-mode NOON state is known to be vulnerable to photon loss, and its quantum-enhancement can be dissipated by lossy environment. In this work, we demonstrate that a quantum advantage in estimate precision can still be achieved in the presence of photon loss. This is accomplished by optimizing the weights of the multi-mode NOON states according to photon loss rates in the multiple modes, including the reference mode which defines the other phases. For practical relevance, we also show that photon-number counting via a multi-mode beam-splitter achieves the useful, albeit sub-optimal, quantum advantage. We expect this work to provide valuable guidance for develo** quantum-enhanced multiple-phase estimation techniques in lossy environments. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Comments: 9 pages, 6 figures

Nonproportionality of NaI(Tl) Scintillation Detector for Dark Matter Search Experiments

Authors: S. M. Lee, G. Adhikari, N. Carlin, J. Y. Cho, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Fran. a, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, S. W. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim , et al. (37 additional authors not shown)

Abstract: We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary $γ$ spectroscopy, measures light yields across diverse energy levels from full-energy $γ$ peaks produced by the decays of various isotopes. These $γ$ peaks of interest were produced… ▽ More We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary $γ$ spectroscopy, measures light yields across diverse energy levels from full-energy $γ$ peaks produced by the decays of various isotopes. These $γ$ peaks of interest were produced by decays supported by both long and short-lived isotopes. Analyzing peaks from decays supported only by short-lived isotopes presented a unique challenge due to their limited statistics and overlap** energies, which was overcome by long-term data collection and a time-dependent analysis. A key achievement is the direct measurement of the 0.87 keV light yield, resulting from the cascade following electron capture decay of $^{22}$Na from internal contamination. This measurement, previously accessible only indirectly, deepens our understanding of NaI(Tl) scintillator behavior in the region of interest for dark matter searches. This study holds substantial implications for background modeling and the interpretation of dark matter signals in NaI(Tl) experiments. △ Less

Submitted 10 May, 2024; v1 submitted 14 January, 2024; originally announced January 2024.

Comments: 12 pages, 7 figures

Journal ref: Eur. Phys. J. C 84 (2024) 484

Observation of the Magnonic Dicke Superradiant Phase Transition

Authors: Dasom Kim, Sohail Dasgupta, Xiaoxuan Ma, Joong-Mok Park, Hao-Tian Wei, Liang Luo, Jacques Doumani, Xinwei Li, Wanting Yang, Di Cheng, Richard H. J. Kim, Henry O. Everitt, Shojiro Kimura, Hiroyuki Nojiri, Jigang Wang, Shixun Cao, Motoaki Bamba, Kaden R. A. Hazzard, Junichiro Kono

Abstract: Two-level atoms coupled with single-mode cavity photons are predicted to exhibit a quantum phase transition when the coupling strength exceeds a critical value, entering a phase in which atomic polarization and photonic field are finite even at zero temperature and without external driving. However, this phenomenon, the superradiant phase transition (SRPT), is forbidden by a no-go theorem due to t… ▽ More Two-level atoms coupled with single-mode cavity photons are predicted to exhibit a quantum phase transition when the coupling strength exceeds a critical value, entering a phase in which atomic polarization and photonic field are finite even at zero temperature and without external driving. However, this phenomenon, the superradiant phase transition (SRPT), is forbidden by a no-go theorem due to the existence of the diamagnetic term in the Hamiltonian. Here, we present spectroscopic evidence for a magnonic SRPT in ErFeO$_3$, where the role of the photonic mode (two-level atoms) in the photonic SRPT is played by an Fe$^{3+}$ magnon mode (Er$^{3+}$ spins). The absence of the diamagnetic term in the Fe$^{3+}$-Er$^{3+}$ exchange coupling ensures that the no-go theorem does not apply. Terahertz and gigahertz magnetospectroscopy experiments revealed the signatures of the SRPT -- a kink and a softening, respectively, of two spin-magnon hybridized modes at the critical point. △ Less

Submitted 3 January, 2024; originally announced January 2024.

Effect of Resonant Acoustic Powder Mixing on Delay Time of W-KClO4-BaCrO4 Mixtures

Authors: Kyungmin Kwon, Seunghwan Ryu, Soyun Joo, Youngjoon Han, Donghyeon Baek, Moonsoo Park, Dongwon Kim, Seungbum Hong

Abstract: This study investigates the impact of resonant acoustic powder mixing on the delay time of the W-KClO4-BaCrO4 (WKB) mixture and its potential implications for powder and material synthesis. Through thermal analysis, an inverse linear relationship was found between thermal conductivity and delay time, allowing us to use thermal conductivity as a reliable proxy for the delay time. By comparing the t… ▽ More This study investigates the impact of resonant acoustic powder mixing on the delay time of the W-KClO4-BaCrO4 (WKB) mixture and its potential implications for powder and material synthesis. Through thermal analysis, an inverse linear relationship was found between thermal conductivity and delay time, allowing us to use thermal conductivity as a reliable proxy for the delay time. By comparing the thermal conductivity of WKB mixtures mixed manually and using acoustic powder mixer, we found that acoustic powder mixing resulted in minimal deviations in thermal conductivity, proving more uniform mixing. Furthermore, DSC analysis and Sestak-Berggren modeling demonstrated consistent reaction dynamics with a constant activation energy as the reaction progressed in samples mixed using acoustic waves. These findings underscore the critical role of uniform powder mixing in enhancing the thermodynamic quality of the WKB mixture and emphasize the importance of develo** novel methods for powder and material synthesis. △ Less

Submitted 20 December, 2023; originally announced December 2023.

Comments: 29 pages, 8 figures

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Feedback Cooling of an Insulating High-Q Diamagnetically Levitated Plate

Authors: S. Tian, K. Jadeja, D. Kim, A. Hodges, G. C. Hermosa, C. Cusicanqui, R. Lecamwasam, J. E. Downes, J. Twamley

Abstract: Levitated systems in vacuum have many potential applications ranging from new types of inertial and magnetic sensors through to fundamental issues in quantum science, the generation of massive Schrodinger cats, and the connections between gravity and quantum physics. In this work, we demonstrate the passive, diamagnetic levitation of a centimeter-sized massive oscillator which is fabricated using… ▽ More Levitated systems in vacuum have many potential applications ranging from new types of inertial and magnetic sensors through to fundamental issues in quantum science, the generation of massive Schrodinger cats, and the connections between gravity and quantum physics. In this work, we demonstrate the passive, diamagnetic levitation of a centimeter-sized massive oscillator which is fabricated using a novel method that ensures that the material, though highly diamagnetic, is an electrical insulator. By chemically coating a powder of microscopic graphite beads with silica and embedding the coated powder in high-vacuum compatible wax, we form a centimeter-sized thin square plate which magnetically levitates over a checkerboard magnet array. The insulating coating reduces eddy dam** by almost an order of magnitude compared to uncoated graphite with the same particle size. These plates exhibit a different equilibrium orientation to pyrolytic graphite due to their isotropic magnetic susceptibility. We measure the motional quality factor to be Q~1.58*10^5 for an approximately centimeter-sized composite resonator with a mean particle size of 12 microns. Further, we apply delayed feedback to cool the vertical motion of frequency ~19 Hz from room temperature to 320 millikelvin. △ Less

Submitted 4 December, 2023; originally announced December 2023.

Comments: 5 pages main + 13 pages supplementary

Physics Opportunities at a Beam Dump Facility at PIP-II at Fermilab and Beyond

Authors: A. A. Aguilar-Arevalo, J. L. Barrow, C. Bhat, J. Bogenschuetz, C. Bonifazi, A. Bross, B. Cervantes, J. D'Olivo, A. De Roeck, B. Dutta, M. Eads, J. Eldred, J. Estrada, A. Fava, C. Fernandes Vilela, G. Fernandez Moroni, B. Flaugher, S. Gardiner, G. Gurung, P. Gutierrez, W. Y. Jang, K. J. Kelly, D. Kim, T. Kobilarcik, Z. Liu , et al. (23 additional authors not shown)

Abstract: The Fermilab Proton-Improvement-Plan-II (PIP-II) is being implemented in order to support the precision neutrino oscillation measurements at the Deep Underground Neutrino Experiment, the U.S. flagship neutrino experiment. The PIP-II LINAC is presently under construction and is expected to provide 800~MeV protons with 2~mA current. This white paper summarizes the outcome of the first workshop on Ma… ▽ More The Fermilab Proton-Improvement-Plan-II (PIP-II) is being implemented in order to support the precision neutrino oscillation measurements at the Deep Underground Neutrino Experiment, the U.S. flagship neutrino experiment. The PIP-II LINAC is presently under construction and is expected to provide 800~MeV protons with 2~mA current. This white paper summarizes the outcome of the first workshop on May 10 through 13, 2023, to exploit this capability for new physics opportunities in the kinematic regime that are unavailable to other facilities, in particular a potential beam dump facility implemented at the end of the LINAC. Various new physics opportunities have been discussed in a wide range of kinematic regime, from eV scale to keV and MeV. We also emphasize that the timely establishment of the beam dump facility at Fermilab is essential to exploit these new physics opportunities. △ Less

Submitted 16 November, 2023; originally announced November 2023.

Report number: FERMILAB-FN-1242-AD-ND-PPD

Alpha backgrounds in NaI(Tl) crystals of COSINE-100

Authors: G. Adhikari, N. Carlin, D. F. F. S. Cavalcante, J. Y. Cho, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, S. W. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim , et al. (38 additional authors not shown)

Abstract: COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl) as the target material. 210Pb and daughter isotopes are a dominant background in the WIMP region of interest and are detected via beta decay and alpha decay. Analysis of the alpha channel complements the background model as observed in the beta/gamma channel. We present the measurement of the quenching factors and Monte Ca… ▽ More COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl) as the target material. 210Pb and daughter isotopes are a dominant background in the WIMP region of interest and are detected via beta decay and alpha decay. Analysis of the alpha channel complements the background model as observed in the beta/gamma channel. We present the measurement of the quenching factors and Monte Carlo simulation results and activity quantification of the alpha decay components of the COSINE-100 NaI(Tl) crystals. The data strongly indicate that the alpha decays probabilistically undergo two possible quenching factors but require further investigation. The fitted results are consistent with independent measurements and improve the overall understanding of the COSINE-100 backgrounds. Furthermore, the half-life of 216Po has been measured to be 143.4 +/- 1.2 ms, which is consistent with and more precise than recent measurements. △ Less

Submitted 30 January, 2024; v1 submitted 8 November, 2023; originally announced November 2023.

Modeling of liquid metal droplet deformation by laser impact

Authors: I. Yu. Vichev, D. A. Kim, V. V. Medvedev

Abstract: The method of sequential simulation of liquid metal droplet deformation by a laser pulse is considered. The first stage is the laser impact on a droplet. It was simulated using RALEF-2D code, based on the radiative gas dynamic model. The next stage is target deformation from a droplet to a disk. This part of simulation was carried out using OpenFOAM code where surface tension forces are taken into… ▽ More The method of sequential simulation of liquid metal droplet deformation by a laser pulse is considered. The first stage is the laser impact on a droplet. It was simulated using RALEF-2D code, based on the radiative gas dynamic model. The next stage is target deformation from a droplet to a disk. This part of simulation was carried out using OpenFOAM code where surface tension forces are taken into account. Good agreement with experimental results was obtained. △ Less

Submitted 2 November, 2023; originally announced November 2023.

Suppressed terahertz dynamics of water confined in nanometer gaps

Authors: Hyosim Yang, Gangseon Ji, Min Choi, Seondo Park, Hyeonjun An, Hyoung-Taek Lee, Joonwoo Jeong, Yun Daniel Park, Kyungwan Kim, Noejung Park, Jeeyoon Jeong, Dai-Sik Kim, Hyeong-Ryeol Park

Abstract: Nanoconfined waters have been extensively studied within various systems, demonstrating low permittivity under static conditions; however, their dynamics have been largely unexplored due to the lack of a robust platform, particularly in the terahertz (THz) regime where hydrogen bond dynamics occur. We report the THz complex refractive index of nanoconfined water within metal gaps ranging in width… ▽ More Nanoconfined waters have been extensively studied within various systems, demonstrating low permittivity under static conditions; however, their dynamics have been largely unexplored due to the lack of a robust platform, particularly in the terahertz (THz) regime where hydrogen bond dynamics occur. We report the THz complex refractive index of nanoconfined water within metal gaps ranging in width from 2 to 20 nanometers, spanning mostly interfacial waters all the way to quasi-bulk waters. These loop nanogaps, encasing water molecules, sharply enhance light-matter interactions, enabling precise measurements of refractive index, both real and imaginary parts, of nanometer-thick layers of water. Under extreme confinement, the suppressed dynamics of the long-range correlation of hydrogen bond networks corresponding to the THz frequency regime result in a significant reduction in the terahertz permittivity of even 'non-interfacial' water. This platform provides valuable insights into the long-range collective dynamics of water molecules which is crucial to understanding water-mediated processes such as protein folding, lipid rafts, and molecular recognition. △ Less

Submitted 4 November, 2023; v1 submitted 29 October, 2023; originally announced October 2023.

Flexible Ansatz for N-body Perturbation Theory

Authors: Ramón Alain Miranda-Quintana, Taewon D. Kim, Rugwed A. Lokhande, M. Richer, Gabriela Sánchez-Díaz, Pratiksha B. Gaikwad, Paul W. Ayers

Abstract: We propose a new Perturbation Theory framework that can be used to help with the projective solution of the Schrödinger equation for arbitrary wavefunctions. This Flexible Ansatz for N-body Perturbation Theory (FANPT) is based on our previously proposed Flexible Ansatz for N-body Configuration Interaction (FANCI). We derive recursive FANPT expressions including arbitrary orders in the perturbation… ▽ More We propose a new Perturbation Theory framework that can be used to help with the projective solution of the Schrödinger equation for arbitrary wavefunctions. This Flexible Ansatz for N-body Perturbation Theory (FANPT) is based on our previously proposed Flexible Ansatz for N-body Configuration Interaction (FANCI). We derive recursive FANPT expressions including arbitrary orders in the perturbation hierarchy. We show that the FANPT equations are well-behaved across a wide range of conditions, including static correlation-dominated configurations and highly non-linear wavefunctions. △ Less

Submitted 4 October, 2023; originally announced October 2023.

Resolving proximal nanometer objects below the diffraction limit with interferometric phase intensity nanoscopy

Authors: Guangjie Cui, Do Young Kim, Di Zu, Guanbo Chai, Somin Eunice Lee

Abstract: The ability to spatially and temporally map nanoscale environments in situ over extended timescales would be transformative for biology, biomedicine, and bioengineering. All nanometer objects, from nanoparticles down to single proteins, scatter light. Interferometric scattering stands as a powerful tool, offering ultrasensitivity and resolution vital for visualizing nanoscale entities. Interferome… ▽ More The ability to spatially and temporally map nanoscale environments in situ over extended timescales would be transformative for biology, biomedicine, and bioengineering. All nanometer objects, from nanoparticles down to single proteins, scatter light. Interferometric scattering stands as a powerful tool, offering ultrasensitivity and resolution vital for visualizing nanoscale entities. Interferometric scattering from an individual nanoparticle down to an individual protein has been detected; however, resolving adjacent nanometer objects with interferometric scattering has not yet been demonstrated. In this work, we present interferometric phase intensity nanoscopy to resolve adjacent nanometer objects with interferometric scattering. We demonstrate that multiphase and sensitivity of interferometric phase intensity nanoscopy reveals ellipse Airy patterns correlated with nanostructural features. We show that eliminating background fluctuation by employing circular polarized illumination in interferometric phase intensity nanoscopy is essential to separate proximal nanometer objects below the diffraction limit. We envision interferometric phase intensity nanoscopy for resolving a variety of adjacent nanometer objects from nanoparticles down to proximal proteins in situ over extended time periods for wide range of applications in biology, biomedicine and bioengineering. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Coupled Cluster-Inspired Geminal Wavefunctions

Authors: Pratiksha B. Gaikwad, Taewon D. Kim, M. Richer, Rugwed A. Lokhande, Gabriela Sánchez-Díaz, Peter A. Limacher, Paul W. Ayers, Ramón Alain Miranda-Quintana

Abstract: Electron pairs have an illustrious history in chemistry, from powerful concepts to understanding structural stability and reactive changes, to the promise of serving as building blocks of quantitative descriptions of the electronic structure of complex molecules and materials. However, traditionally, two-electron wavefunctions (geminals), have not enjoyed the popularity and widespread use of the m… ▽ More Electron pairs have an illustrious history in chemistry, from powerful concepts to understanding structural stability and reactive changes, to the promise of serving as building blocks of quantitative descriptions of the electronic structure of complex molecules and materials. However, traditionally, two-electron wavefunctions (geminals), have not enjoyed the popularity and widespread use of the more standard single-particle methods. This has changed recently, with a renewed interest in the development of geminal wavefunctions as an alternative to describing strongly-correlated phenomena. Hence, there is a need to find geminal methods that are accurate, computationally-tractable, and do not demand significant input from the user (particularly, via cumbersome and often ill-behaved orbital optimization steps). Here we propose new families of geminal wavefunctions, inspired by the pair Coupled Cluster (pCCD) ansatz. We present a new hierarchy of two-electron wavefunctions that extend the one-reference orbital idea to other geminals. Moreover, we show how to incorporate single-like excitations in this framework, without leaving the quasiparticle picture. We explore the role of imposing seniority restrictions on these wavefunctions, and benchmark these new methods on model strongly-correlated systems. △ Less

Submitted 11 October, 2023; v1 submitted 2 October, 2023; originally announced October 2023.

DynAMO: Multi-agent reinforcement learning for dynamic anticipatory mesh optimization with applications to hyperbolic conservation laws

Authors: Tarik Dzanic, Ketan Mittal, Dohyun Kim, Jiachen Yang, Socratis Petrides, Brendan Keith, Robert Anderson

Abstract: We introduce DynAMO, a reinforcement learning paradigm for Dynamic Anticipatory Mesh Optimization. Adaptive mesh refinement is an effective tool for optimizing computational cost and solution accuracy in numerical methods for partial differential equations. However, traditional adaptive mesh refinement approaches for time-dependent problems typically rely only on instantaneous error indicators to… ▽ More We introduce DynAMO, a reinforcement learning paradigm for Dynamic Anticipatory Mesh Optimization. Adaptive mesh refinement is an effective tool for optimizing computational cost and solution accuracy in numerical methods for partial differential equations. However, traditional adaptive mesh refinement approaches for time-dependent problems typically rely only on instantaneous error indicators to guide adaptivity. As a result, standard strategies often require frequent remeshing to maintain accuracy. In the DynAMO approach, multi-agent reinforcement learning is used to discover new local refinement policies that can anticipate and respond to future solution states by producing meshes that deliver more accurate solutions for longer time intervals. By applying DynAMO to discontinuous Galerkin methods for the linear advection and compressible Euler equations in two dimensions, we demonstrate that this new mesh refinement paradigm can outperform conventional threshold-based strategies while also generalizing to different mesh sizes, remeshing and simulation times, and initial conditions. △ Less

Submitted 9 March, 2024; v1 submitted 2 October, 2023; originally announced October 2023.

Comments: 38 pages, 21 figures

Report number: LLNL-JRNL-855285

Depolarized Holography with Polarization-multiplexing Metasurface

Authors: Seung-Woo Nam, Young** Kim, Dongyeon Kim, Yoonchan Jeong

Abstract: The evolution of computer-generated holography (CGH) algorithms has prompted significant improvements in the performances of holographic displays. Nonetheless, they start to encounter a limited degree of freedom in CGH optimization and physical constraints stemming from the coherent nature of holograms. To surpass the physical limitations, we consider polarization as a new degree of freedom by uti… ▽ More The evolution of computer-generated holography (CGH) algorithms has prompted significant improvements in the performances of holographic displays. Nonetheless, they start to encounter a limited degree of freedom in CGH optimization and physical constraints stemming from the coherent nature of holograms. To surpass the physical limitations, we consider polarization as a new degree of freedom by utilizing a novel optical platform called metasurface. Polarization-multiplexing metasurfaces enable incoherent-like behavior in holographic displays due to the mutual incoherence of orthogonal polarization states. We leverage this unique characteristic of a metasurface by integrating it into a holographic display and exploiting polarization diversity to bring an additional degree of freedom for CGH algorithms. To minimize the speckle noise while maximizing the image quality, we devise a fully differentiable optimization pipeline by taking into account the metasurface proxy model, thereby jointly optimizing spatial light modulator phase patterns and geometric parameters of metasurface nanostructures. We evaluate the metasurface-enabled depolarized holography through simulations and experiments, demonstrating its ability to reduce speckle noise and enhance image quality. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Comments: 15 pages, 13 figures, to be published in SIGGRAPH Asia 2023

Integrated modeling of wavefront sensing and control for space telescopes utilizing active and adaptive optics

Authors: Kevin Z. Derby, Kian Milani, Solvay Blomquist, Kyle Van Gorkom, Sebastiaan Haffert, Hyukmo Kang, Hill Tailor, Heejoo Choi, Christopher B. Mendillo, Jared R. Males, Daewook Kim, Ewan S. Douglas

Abstract: Extreme wavefront correction is required for coronagraphs on future space telescopes to reach 1e-8 or better starlight suppression for the direct imaging and characterization of exoplanets in reflected light. Thus, a suite of wavefront sensors working in tandem with active and adaptive optics are used to achieve stable, nanometer-level wavefront control over long observations. In order to verify w… ▽ More Extreme wavefront correction is required for coronagraphs on future space telescopes to reach 1e-8 or better starlight suppression for the direct imaging and characterization of exoplanets in reflected light. Thus, a suite of wavefront sensors working in tandem with active and adaptive optics are used to achieve stable, nanometer-level wavefront control over long observations. In order to verify wavefront control systems comprehensive and accurate integrated models are needed. These should account for any sources of on-orbit error that may degrade performance past the limit imposed by photon noise. An integrated model of wavefront sensing and control for a space-based coronagraph was created using geometrical raytracing and physical optics propagation methods. Our model concept consists of an active telescope front end in addition to a charge-6 vector vortex coronagraph instrument. The telescope uses phase retrieval to guide primary mirror bending modes and secondary mirror position to control the wavefront error within tens of nanometers. The telescope model is dependent on raytracing to simulate these active optics corrections for compensating the wavefront errors caused by misalignments and thermal gradients in optical components. Entering the coronagraph, a self-coherent camera is used for focal plane wavefront sensing and digging the dark hole. We utilize physical optics propagation to model the coronagraph's sensitivity to mid and high-order wavefront errors caused by optical surface errors and pointing jitter. We use our integrated models to quantify expected starlight suppression versus wavefront sensor signal-to-noise ratio. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: 15 pages, 11 figures, SPIE Optics and Photonics 2023

Diffuse Inelastic Neutron Scattering from Anharmonic Vibrations in Cuprite

Authors: C. N. Saunders, V. V. Ladygin, D. S. Kim, C. M. Bernal-Choban, S. H. Lohaus, G. E. Granroth, D. L. Abernathy, B. Fultz

Abstract: Atomic vibrational dynamics in cuprite, Cu2O, was studied by inelastic neutron scattering and molecular dynamics (MD) simulations from 10 K to 900 K. Above 300 K, a diffuse inelastic intensity (DII) appeared, obscuring the high-energy phonon modes. Classical MD simulations with a machine learning interatomic potential reproduced general features of the DII, especially with a Langevin thermostat. T… ▽ More Atomic vibrational dynamics in cuprite, Cu2O, was studied by inelastic neutron scattering and molecular dynamics (MD) simulations from 10 K to 900 K. Above 300 K, a diffuse inelastic intensity (DII) appeared, obscuring the high-energy phonon modes. Classical MD simulations with a machine learning interatomic potential reproduced general features of the DII, especially with a Langevin thermostat. The DII originates from random phase shifts of vibrating O-atoms that have anharmonic interactions with neighboring Cu-atoms. △ Less

Submitted 1 September, 2023; originally announced September 2023.

MSC Class: 74H05; 70K11; 37H11; ACM Class: J.2; I.6.6

Bespoke Nanoparticle Synthesis and Chemical Knowledge Discovery Via Autonomous Experimentations

Authors: Hyuk Jun Yoo, Nayeon Kim, Heeseung Lee, Daeho Kim, Leslie Tiong Ching Ow, Hyobin Nam, Chansoo Kim, Seung Yong Lee, Kwan-Young Lee, Donghun Kim, Sang Soo Han

Abstract: The optimization of nanomaterial synthesis using numerous synthetic variables is considered to be extremely laborious task because the conventional combinatorial explorations are prohibitively expensive. In this work, we report an autonomous experimentation platform developed for the bespoke design of nanoparticles (NPs) with targeted optical properties. This platform operates in a closed-loop man… ▽ More The optimization of nanomaterial synthesis using numerous synthetic variables is considered to be extremely laborious task because the conventional combinatorial explorations are prohibitively expensive. In this work, we report an autonomous experimentation platform developed for the bespoke design of nanoparticles (NPs) with targeted optical properties. This platform operates in a closed-loop manner between a batch synthesis module of NPs and a UV- Vis spectroscopy module, based on the feedback of the AI optimization modeling. With silver (Ag) NPs as a representative example, we demonstrate that the Bayesian optimizer implemented with the early stop** criterion can efficiently produce Ag NPs precisely possessing the desired absorption spectra within only 200 iterations (when optimizing among five synthetic reagents). In addition to the outstanding material developmental efficiency, the analysis of synthetic variables further reveals a novel chemistry involving the effects of citrate in Ag NP synthesis. The amount of citrate is a key to controlling the competitions between spherical and plate-shaped NPs and, as a result, affects the shapes of the absorption spectra as well. Our study highlights both capabilities of the platform to enhance search efficiencies and to provide a novel chemical knowledge by analyzing datasets accumulated from the autonomous experimentations. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Wall-bounded periodic snap-through and contact of a buckled sheet

Authors: Ehsan Mahravan, Mohsen Lahooti, Daegyoum Kim

Abstract: Fluid flow passing a post-buckled sheet placed between two close confining walls induces periodic snap-through oscillations and contacts that can be employed for triboelectric energy harvesting. The responses of a two-dimensional sheet to a uniform flow and wall confinement in both equilibrium and post-equilibrium states are numerically investigated by varying the distance between the two ends of… ▽ More Fluid flow passing a post-buckled sheet placed between two close confining walls induces periodic snap-through oscillations and contacts that can be employed for triboelectric energy harvesting. The responses of a two-dimensional sheet to a uniform flow and wall confinement in both equilibrium and post-equilibrium states are numerically investigated by varying the distance between the two ends of the sheet, gap distance between the confining walls, and flow velocity. Cases with strong interactions between the sheet and walls are of most interest for examining how contact with the walls affects the dynamics of the sheet and flow structure. At equilibrium, contact with the wall displaces the sheet to form a nadir on its front part, yielding a lower critical flow velocity for the transition to snap-through oscillations. However, reducing the gap distance between the walls below a certain threshold distinctly shifts the shape of the sheet, alters pressure distribution, and eventually leads to a notable delay in the instability. The contact between the oscillating sheet and the walls at post-equilibrium is divided into several distinct modes, changing from sliding/rolling contact to bouncing contact with increasing flow velocity. During this transition, the time-averaged contact force exerted on the sheet decreases with the flow velocity. The vortices generated at the extrema of the oscillating sheet are annihilated by direct contact with the walls and merging with the shear layers formed by the walls, resulting in a wake structure dominated by the unstable shear layers. △ Less

Submitted 31 August, 2023; originally announced September 2023.

Comments: 30 pages, 14 figures, 4 Movies

Journal ref: Journal of Fluid Mechanics, 976 (2023), A1

Shape deformation of magnetically levitated fluid droplets

Authors: I. Sanskriti, D. Kim, J. Twamley

Abstract: Diamagnetic levitation can provide a completely passive method to support materials against the pull of gravity, and researchers have levitated both solids and fluids. Such levitation can be assisted by increasing the magnetic susceptibility contrast by using a surrounding paramagnetic medium and through buoyancy forces, known as magneto-Archimedean levitation. The magneto-Archimedean levitation o… ▽ More Diamagnetic levitation can provide a completely passive method to support materials against the pull of gravity, and researchers have levitated both solids and fluids. Such levitation can be assisted by increasing the magnetic susceptibility contrast by using a surrounding paramagnetic medium and through buoyancy forces, known as magneto-Archimedean levitation. The magneto-Archimedean levitation of solids has proved useful in chemistry and biology. However, the levitation of fluid droplets has an additional interest because the fluid droplet's shape can deform. We perform experiments and simulations to gauge the squashing or eccentricity of the static magnetically levitated fluid droplet. By carefully characterizing all the parameters affecting the droplet's levitation, using image analysis to estimate the droplet's eccentricity, and using finite element adaptive simulations to find the lowest energy droplet shape, we find good agreement between the simulations and experimental results. As a potential application, we show that the droplet's eccentricity can be used to perform magnetic gradiometry with a potential resolution of $S\sim 8\,{\rm nT/cm}$, over a volume of 10 mm$^3$, which is competitive with other room-temperature magnetic gradiometer techniques. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Comments: 6 pages, two column, 4 figures

Plasmon thermal conductivity of thin Au and Ag films

Authors: Dong-min Kim, Jeongmin Nam, Bong Jae Lee

Abstract: We investigated the thermal conductivity of surface plasmon polaritons (SPPs) propagating along thin Au and Ag films on a SiO$_2$ substrate with a Ti adhesive layer. To determine the propagation length and skin depth of SPPs along Au and Ag thin films, we numerically solved the dispersion relation while considering the size effect of the permittivity of metal. Additionally, we derived the spatial… ▽ More We investigated the thermal conductivity of surface plasmon polaritons (SPPs) propagating along thin Au and Ag films on a SiO$_2$ substrate with a Ti adhesive layer. To determine the propagation length and skin depth of SPPs along Au and Ag thin films, we numerically solved the dispersion relation while considering the size effect of the permittivity of metal. Additionally, we derived the spatial distribution of SPPs along the film thickness to analyze the effect of the Ti adhesive layer on the plasmon thermal conductivity of Au and Ag thin films. Our theoretical predictions revealed a decrease of approximately 30\% in plasmon thermal conductivity when considering the size effect of the permittivity of thin metal films. Furthermore, this causes the film thickness at which maximum thermal conductivity occurs to increase by about 30\%. Taking these factors into account, we calculated the optimal thickness of Au and Ag films, along with Ti adhesive layers, on SiO$_2$ substrates to be approximately 20 nm. By fabricating a sample with the optimal thickness of Au and Ag films, we experimentally demonstrated that the plasmon thermal conductivity of Au and Ag films can be as high as about 20\% of their electron contribution. This research will broaden the thermal design applications of ballistic thermal transport by SPPs propagating along thin metal coatings in microelectronics. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Comments: 5 figures

Journal ref: Physical Review B 108, 205418, 2023

Search for inelastic WIMP-iodine scattering with COSINE-100

Authors: G. Adhikari, N. Carlin, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, D. H. Lee , et al. (34 additional authors not shown)

Abstract: We report the results of a search for inelastic scattering of weakly interacting massive particles (WIMPs) off $^{127}$I nuclei using NaI(Tl) crystals with a data exposure of 97.7 kg$\cdot$years from the COSINE-100 experiment. The signature of inelastic WIMP-$^{127}$I scattering is a nuclear recoil accompanied by a 57.6 keV $γ$-ray from the prompt deexcitation, producing a more energetic signal co… ▽ More We report the results of a search for inelastic scattering of weakly interacting massive particles (WIMPs) off $^{127}$I nuclei using NaI(Tl) crystals with a data exposure of 97.7 kg$\cdot$years from the COSINE-100 experiment. The signature of inelastic WIMP-$^{127}$I scattering is a nuclear recoil accompanied by a 57.6 keV $γ$-ray from the prompt deexcitation, producing a more energetic signal compared to the typical WIMP nuclear recoil signal. We found no evidence for this inelastic scattering signature and set a 90 $\%$ confidence level upper limit on the WIMP-proton spin-dependent, inelastic scattering cross section of $1.2 \times 10^{-37} {\rm cm^{2}}$ at the WIMP mass 500 ${\rm GeV/c^{2}}$. △ Less

Submitted 30 October, 2023; v1 submitted 19 July, 2023; originally announced July 2023.

Comments: 8 pages, 5 figures. arXiv admin note: text overlap with arXiv:2104.03537

Journal ref: Phys. Rev. D 108, 092006 (2023)

All-glass 100 mm Diameter Visible Metalens for Imaging the Cosmos

Authors: Joon-Suh Park, Soon Wei Daniel Lim, Arman Amirzhan, Hyukmo Kang, Karlene Karrfalt, Daewook Kim, Joel Leger, Augustine M. Urbas, Marcus Ossiander, Zhaoyi Li, Federico Capasso

Abstract: Metasurfaces, optics made from subwavelength-scale nanostructures, have been limited to millimeter-sizes by the scaling challenge of producing vast numbers of precisely engineered elements over a large area. In this study, we demonstrate an all-glass 100 mm diameter metasurface lens (metalens) comprising 18.7 billion nanostructures that operates in the visible spectrum with a fast f-number (f/1.5,… ▽ More Metasurfaces, optics made from subwavelength-scale nanostructures, have been limited to millimeter-sizes by the scaling challenge of producing vast numbers of precisely engineered elements over a large area. In this study, we demonstrate an all-glass 100 mm diameter metasurface lens (metalens) comprising 18.7 billion nanostructures that operates in the visible spectrum with a fast f-number (f/1.5, NA=0.32) using deep-ultraviolet (DUV) projection lithography. Our work overcomes the exposure area constraints of lithography tools and demonstrates that large metasurfaces are commercially feasible. Additionally, we investigate the impact of various fabrication errors on the imaging quality of the metalens, several of which are unique to such large area metasurfaces. We demonstrate direct astronomical imaging of the Sun, the Moon, and emission nebulae at visible wavelengths and validate the robustness of such metasurfaces under extreme environmental thermal swings for space applications. △ Less

Submitted 16 July, 2023; originally announced July 2023.

Silicon tracker array for RIB experiments at SAMURAI

Authors: A. I. Stefanescu, V. Panin, L. Trache, T. Motobayashi, H. Otsu, A. Saastamoinen, T. Uesaka, L. Stuhl, J. Tanaka, D. Tudor, I. C. Stefanescu, A. E. Spiridon, K. Yoneda, H. Baba, M. Kurokawa, Y. Togano, Z. Halasz, M. Sasano, S. Ota, Y. Kubota, D. S. Ahn, T. Kobayashi, Z. Elekes, N. Fukuda, H. Takeda , et al. (27 additional authors not shown)

Abstract: This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions o… ▽ More This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions of interest for nuclear astrophysics. The technical characteristics of the tracking array are described in detail as are its performance in two pilot experiments. The physics justification for such a system is also presented. △ Less

Submitted 13 July, 2023; originally announced July 2023.

Journal ref: Eur. Phys. J. A (2022) 58:223

Are machine learning technologies ready to be used for humanitarian work and development?

Authors: Vedran Sekara, Márton Karsai, Esteban Moro, Dohyung Kim, Enrique Delamonica, Manuel Cebrian, Miguel Luengo-Oroz, Rebeca Moreno Jiménez, Manuel Garcia-Herranz

Abstract: Novel digital data sources and tools like machine learning (ML) and artificial intelligence (AI) have the potential to revolutionize data about development and can contribute to monitoring and mitigating humanitarian problems. The potential of applying novel technologies to solving some of humanity's most pressing issues has garnered interest outside the traditional disciplines studying and workin… ▽ More Novel digital data sources and tools like machine learning (ML) and artificial intelligence (AI) have the potential to revolutionize data about development and can contribute to monitoring and mitigating humanitarian problems. The potential of applying novel technologies to solving some of humanity's most pressing issues has garnered interest outside the traditional disciplines studying and working on international development. Today, scientific communities in fields like Computational Social Science, Network Science, Complex Systems, Human Computer Interaction, Machine Learning, and the broader AI field are increasingly starting to pay attention to these pressing issues. However, are sophisticated data driven tools ready to be used for solving real-world problems with imperfect data and of staggering complexity? We outline the current state-of-the-art and identify barriers, which need to be surmounted in order for data-driven technologies to become useful in humanitarian and development contexts. We argue that, without organized and purposeful efforts, these new technologies risk at best falling short of promised goals, at worst they can increase inequality, amplify discrimination, and infringe upon human rights. △ Less

Submitted 4 July, 2023; originally announced July 2023.

Comments: 15 pages, 2 figures

Energy-efficient superparamagnetic Ising machine and its application to traveling salesman problems

Authors: Jia Si, Shuhan Yang, Yunuo Cen, Jiaer Chen, Zhaoyang Yao, Dong-Jun Kim, Kaiming Cai, Jerald Yoo, Xuanyao Fong, Hyunsoo Yang

Abstract: The growth of artificial intelligence and IoT has created a significant computational load for solving non-deterministic polynomial-time (NP)-hard problems, which are difficult to solve using conventional computers. The Ising computer, based on the Ising model and annealing process, has been highly sought for finding approximate solutions to NP-hard problems by observing the convergence of dynamic… ▽ More The growth of artificial intelligence and IoT has created a significant computational load for solving non-deterministic polynomial-time (NP)-hard problems, which are difficult to solve using conventional computers. The Ising computer, based on the Ising model and annealing process, has been highly sought for finding approximate solutions to NP-hard problems by observing the convergence of dynamic spin states. However, it faces several challenges, including high power consumption due to artificial spins and randomness emulated by complex circuits, as well as low scalability caused by the rapidly growing connectivity when considering large-scale problems. Here, we present an experimental Ising annealing computer based on superparamagnetic tunnel junctions (SMTJs) with all-to-all connections, which successfully solves a 70-city travelling salesman problem (4761-node Ising problem). By taking advantage of the intrinsic randomness of SMTJs, implementing a proper global annealing scheme, and using an efficient algorithm, our SMTJ-based Ising annealer shows superior performance in terms of power consumption and energy efficiency compared to other Ising schemes. Additionally, our approach provides a promising way to solve complex problems with limited hardware resources. Moreover, we propose a crossbar array architecture for scalable integration using conventional magnetic random access memories. Our results demonstrate that the SMTJ-based Ising annealing computer with high energy efficiency, speed, and scalability is a strong candidate for future unconventional computing schemes. △ Less

Submitted 20 June, 2023; originally announced June 2023.

Comments: 5 figures

Origin of superionic state in Earth's inner core

Authors: Ina Park, Yu He, Ho-kwang Mao, Ji Hoon Shim, Duck Young Kim

Abstract: Earth's inner core (IC) serves as a reservoir for volatile elements, which significantly affects its behavior and properties. Recent studies suggest that superionicity can be observed in ice and iron hydrides under high-pressure and temperature conditions, providing an alternative understanding of the planet's interior. In this study, we demonstrated that electride formation drives the superionic… ▽ More Earth's inner core (IC) serves as a reservoir for volatile elements, which significantly affects its behavior and properties. Recent studies suggest that superionicity can be observed in ice and iron hydrides under high-pressure and temperature conditions, providing an alternative understanding of the planet's interior. In this study, we demonstrated that electride formation drives the superionic state in iron hydride under IC pressure conditions. The electride stabilizes the iron lattice and provides a pathway for volatile diffusion. The coupling between lattice stability and superionicity is triggered near 100 GPa and enhanced at higher pressures. The electride-driven superionicity can also be generalized for volatiles in other rocky planetary cores. These findings provide new insights into the mechanisms of core formation and evolution of rocky planets. △ Less

Submitted 13 June, 2023; originally announced June 2023.

Comments: 26 pages, 4 main figures and 6 supplementary figures

Monocrystalline Si/$β$-Ga$_2$O$_3$ p-n heterojunction diodes fabricated via grafting

Authors: Jiarui Gong, Donghyeok Kim, Hokyung Jang, Fikadu Alema, Qingxiao Wang, Tien Khee Ng, Shuoyang Qiu, Jie Zhou, Xin Su, Qinchen Lin, Ranveer Singh, Haris Abbasi, Kelson Chabak, Gregg Jessen, Clincy Cheung, Vincent Gambin, Shubhra S. Pasayat, Andrei Osinsky, Boon, S. Ooi, Chirag Gupta, Zhenqiang Ma

Abstract: The $β$-Ga$_2$O$_3$ has exceptional electronic properties with vast potential in power and RF electronics. Despite the excellent demonstrations of high-performance unipolar devices, the lack of p-type do** in $β$-Ga$_2$O$_3$ has hindered the development of Ga$_2$O$_3$-based bipolar devices. The approach of p-n diodes formed by polycrystalline p-type oxides with n-type $β$-Ga$_2$O$_3$ can face se… ▽ More The $β$-Ga$_2$O$_3$ has exceptional electronic properties with vast potential in power and RF electronics. Despite the excellent demonstrations of high-performance unipolar devices, the lack of p-type do** in $β$-Ga$_2$O$_3$ has hindered the development of Ga$_2$O$_3$-based bipolar devices. The approach of p-n diodes formed by polycrystalline p-type oxides with n-type $β$-Ga$_2$O$_3$ can face severe challenges in further advancing the $β$-Ga$_2$O$_3$ bipolar devices due to their unfavorable band alignment and the poor p-type oxide crystal quality. In this work, we applied the semiconductor grafting approach to fabricate monocrystalline Si/$β$-Ga$_2$O$_3$ p-n diodes for the first time. With enhanced concentration of oxygen atoms at the interface of Si/$β$-Ga$_2$O$_3$, double side surface passivation was achieved for both Si and $β$-Ga$_2$O$_3$ with an interface Dit value of 1-3 x 1012 /cm2 eV. A Si/$β$-Ga$_2$O$_3$ p-n diode array with high fabrication yield was demonstrated along with a diode rectification of 1.3 x 107 at +/- 2 V, a diode ideality factor of 1.13 and avalanche reverse breakdown characteristics. The diodes C-V shows frequency dispersion-free characteristics from 10 kHz to 2 MHz. Our work has set the foundation toward future development of $β$-Ga$_2$O$_3$-based transistors. △ Less

Submitted 30 May, 2023; originally announced May 2023.

Comments: 32 pages, 10 figures. The preliminary data were presented as a poster in the 5th US Gallium Oxide Workshop, Washington, DC. August 07-10, 2022