Showing 1–17 of 17 results for author: Keller, B

Accuracy of reaction coordinate based rate theories for modelling chemical reactions: insights from the thermal isomerization in retinal

Authors: Simon Ghysbrecht, Luca Donati, Bettina G. Keller

Abstract: Modern potential energy surfaces have shifted attention to molecular simulations of chemical reactions. While various methods can estimate rate constants for conformational transitions in molecular dynamics simulations, their applicability to studying chemical reactions remains uncertain due to the high and sharp energy barriers and complex reaction coordinates involved. This study focuses on the… ▽ More Modern potential energy surfaces have shifted attention to molecular simulations of chemical reactions. While various methods can estimate rate constants for conformational transitions in molecular dynamics simulations, their applicability to studying chemical reactions remains uncertain due to the high and sharp energy barriers and complex reaction coordinates involved. This study focuses on the thermal cis-trans isomerization in retinal, employing molecular simulations and comparing rate constant estimates based on one-dimensional rate theories with those based on sampling transitions and grid-based models for low-dimensional collective variable spaces. Even though each individual method to estimate the rate passes its quality tests, the rate constant estimates exhibit disparities of up to four orders of magnitude. Rate constant estimates based on one-dimensional reaction coordinates prove challenging to converge, even if the reaction coordinate is optimized. However, consistent estimates of the rate constant are achieved by sampling transitions and by multi-dimensional grid-based models. △ Less

Submitted 8 July, 2024; v1 submitted 20 December, 2023; originally announced December 2023.

Thermal Isomerization Rates in Retinal Analogues using Ab-Initio Molecular Dynamics

Authors: Simon Ghysbrecht, Bettina G. Keller

Abstract: For a detailed understanding of chemical processes in nature and industry, we need accurate models of chemical reactions in complex environments. While Eyring transition state theory is commonly used for modeling chemical reactions, it is most accurate for small molecules in the gas phase. A wide range of alternative rate theories exist that can better capture reactions involving complex molecules… ▽ More For a detailed understanding of chemical processes in nature and industry, we need accurate models of chemical reactions in complex environments. While Eyring transition state theory is commonly used for modeling chemical reactions, it is most accurate for small molecules in the gas phase. A wide range of alternative rate theories exist that can better capture reactions involving complex molecules and environmental effects. However, they require that the chemical reaction is sampled by molecular dynamics simulations. This is a formidable challenge since the accessible simulation timescales are many orders of magnitude smaller than typical timescales of chemical reactions. To overcome these limitations, rare event methods involving enhanced molecular dynamics sampling are employed. In this work, thermal isomerization of retinal is studied using tight-binding density functional theory. Results from transition state theory are compared to those obtained from enhanced sampling. Rates obtained from dynamical reweighting using infrequent metadynamics simulations were in close agreement with those from transition state theory. Meanwhile, rates obtained from application of Kramers rate equation to a sampled free energy profile along a torsional dihedral reaction coordinate were found to be up to three orders of magnitude higher. This discrepancy raises concerns about applying rate methods to one-dimensional reaction coordinates in chemical reactions. △ Less

Submitted 16 December, 2023; originally announced December 2023.

How chromophore labels shape the structure and dynamics of a peptide hydrogel

Authors: Frederick Heinz, Jonas Proksch, Robert F. Schmidt, Beate Koksch, Michael Gradzielski, Bettina G. Keller

Abstract: Biocompatible and functionalizable hydrogels have a wide range of (potential) medicinal applications. In contrast to conventional hydrogels formed by interconnected or interlocked polymer chains, self-assembled hydrogels form from small building blocks like short peptide chains. This has the advantage that the building blocks can be functionalized separately and then mixed to obtain the desired pr… ▽ More Biocompatible and functionalizable hydrogels have a wide range of (potential) medicinal applications. In contrast to conventional hydrogels formed by interconnected or interlocked polymer chains, self-assembled hydrogels form from small building blocks like short peptide chains. This has the advantage that the building blocks can be functionalized separately and then mixed to obtain the desired properties. However, the hydrogelation process for these systems, especially those with very low polymer weight percentage (< 1 wt%), is not well understood, and therefore it is hard to predict whether a given molecular building block will self-assemble into a hydrogel. This severely hinders the rational design of self-assembled hydrogels. In this study, we demonstrate the impact of an N-terminal chromophore label amino-benzoic acid on the self-assembly and rheology of hydrogel hFF03 (hydrogelating, fibril forming) using molecular dynamics simulations, which self-assembles into α-helical coiled-coils. We find that the chromophore and even its specific regioisomers have a significant influence on the microscopic structure and dynamics of the self-assembled fibril, and on the macroscopic mechanical properties. This is because the chromophore influences the possible salt-bridges which form and stabilize the fibril formation. Furthermore we find that the solvation shell fibrils by itself cannot explain the viscoelasticity of hFF03 hydrogels. Our atomistic model of the hFF03 fibril formation enables a more rational design of these hydrogels. In particular, altering the N-terminal chromophore emergesas a design strategy to tune the mechanic properties of these self-assembled peptide hydrogels. △ Less

Submitted 13 October, 2023; originally announced October 2023.

Comments: 15 pages, 15 including appendix

Grid-based state space exploration for molecular binding

Authors: Hana Zupan, Frederick Heinz, Bettina G. Keller

Abstract: Binding processes are difficult to sample with molecular-dynamics (MD) simulations. In particular, the state space exploration is often incomplete. Evaluating the molecular interaction energy on a grid circumvents this problem but is heavily limited by state space dimensionality. Here, we make the first steps towards a low-dimensional grid-based model of molecular binding. We discretise the state… ▽ More Binding processes are difficult to sample with molecular-dynamics (MD) simulations. In particular, the state space exploration is often incomplete. Evaluating the molecular interaction energy on a grid circumvents this problem but is heavily limited by state space dimensionality. Here, we make the first steps towards a low-dimensional grid-based model of molecular binding. We discretise the state space of relative positions and orientations of the two molecules under the rigid body assumption.The corresponding program is published as the Python package molgri. For the rotational component of the grids, we test algorithms based on Euler angles, polyhedra and quaternions, of which the polyhedra-based are the most uniform. The program outputs a sequence of molecular structures that can be easily processed by standard MD programs to calculate grid point energies. We demonstrate the grid-based approach on two molecular systems: a water dimer and a coiled-coil protein interacting with a chloride anion. For the second system we relax the rigid-body assumption and improve the accuracy of the grid point energies by an energy minimisation. In both cases, oriented bonding patterns and energies confirm expectations from chemical intuition and MD simulations. We also demonstrate how analysis of energy contributions on a grid can be performed and demonstrate that electrostatically-driven association is sufficiently resolved by point-energy calculations. Overall, grid-based models of molecular binding are potentially a powerful complement to molecular sampling approaches, and we see the potential to expand the method to quantum chemistry and flexible docking applications. △ Less

Submitted 1 November, 2022; originally announced November 2022.

Comments: 13 pages, 7 figures

A review of Girsanov Reweighting and of Square Root Approximation for building molecular Markov State Models

Authors: Luca Donati, Marcus Weber, Bettina G. Keller

Abstract: Dynamical reweighting methods permit to estimate kinetic observables of a stochastic process governed by a target potential $\tilde{V}(x)$ from trajectories that have been generated at a different potential $V(x)$. In this article, we present Girsanov reweighting and Square Root Approximation (SqRA): the first method reweights path probabilities exploiting the Girsanov theorem and can be applied t… ▽ More Dynamical reweighting methods permit to estimate kinetic observables of a stochastic process governed by a target potential $\tilde{V}(x)$ from trajectories that have been generated at a different potential $V(x)$. In this article, we present Girsanov reweighting and Square Root Approximation (SqRA): the first method reweights path probabilities exploiting the Girsanov theorem and can be applied to Markov State Models (MSMs) to reweight transition probabilities; the second method was originally developed to discretize the Fokker-Planck operator into a transition rate matrix, but here we implement it into a reweighting scheme for transition rates. We begin by reviewing the theoretical background of the methods, then present two applications relevant to Molecular Dynamics (MD), highlighting their strengths and weaknesses. △ Less

Submitted 23 November, 2022; v1 submitted 21 September, 2022; originally announced September 2022.

CCAT-prime: Optical and cryogenic design of the 850 GHz module for Prime-Cam

Authors: Anthony I. Huber, Scott C. Chapman, Adrian K. Sinclair, Locke D. Spencer, Jason E. Austermann, Steve K. Choi, Jesslyn Devina, Patricio A. Gallardo, Doug Henke, Zachary B. Huber, Ben Keller, Yaqiong Li, Lawrence T. Lin, Mike Niemack, Kayla M. Rossi, Eve M. Vavagiakis, Jordan D. Wheeler

Abstract: Prime-Cam is a first-generation instrument for the Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) Facility. The 850$~$GHz module for Prime-Cam will probe the highest frequency of all the instrument modules. We describe the parameter space of the 850$~$GHz optical system between the F$λ$ spacing, beam size, pixel sensitivity, and detector count. We present the optimization of an optical desi… ▽ More Prime-Cam is a first-generation instrument for the Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) Facility. The 850$~$GHz module for Prime-Cam will probe the highest frequency of all the instrument modules. We describe the parameter space of the 850$~$GHz optical system between the F$λ$ spacing, beam size, pixel sensitivity, and detector count. We present the optimization of an optical design for the 850$~$GHz instrument module for CCAT-prime. We further describe the development of the cryogenic RF chain design to accommodate $>$30 readout lines to read 41,400 kinetic inductance detectors (KIDs) within the cryogenic testbed. △ Less

Submitted 19 August, 2022; originally announced August 2022.

Comments: 12 pages, 7 figures

GROMACS Stochastic Dynamics and BAOAB are equivalent configurational sampling algorithms

Authors: Stefanie Kieninger, Bettina G. Keller

Abstract: Two of the most widely used Langevin integrators for molecular dynamics simulations are the GROMACS Stochastic Dynamics (GSD) integrator and the splitting method BAOAB. In this letter, we show that the GROMACS Stochastic Dynamics integrator is equal to the less frequently used splitting method BAOA. It immediately follows that GSD and BAOAB sample the same configurations and have the same high con… ▽ More Two of the most widely used Langevin integrators for molecular dynamics simulations are the GROMACS Stochastic Dynamics (GSD) integrator and the splitting method BAOAB. In this letter, we show that the GROMACS Stochastic Dynamics integrator is equal to the less frequently used splitting method BAOA. It immediately follows that GSD and BAOAB sample the same configurations and have the same high configurational accuracy. Our numerical results indicate that GSD/BAOA has higher kinetic accuracy than BAOAB. △ Less

Submitted 27 September, 2022; v1 submitted 5 April, 2022; originally announced April 2022.

Journal ref: J. Chem. Theory Comput. (2022)

The Simons Observatory: Magnetic Shielding Measurements for the Universal Multiplexing Module

Authors: Zachary B. Huber, Yaqiong Li, Eve M. Vavagiakis, Steve K. Choi, Jake Connors, Nicholas F. Cothard, Cody J. Duell, Nicholas Galitzki, Erin Healy, Johannes Hubmayr, Bradley R. Johnson, Benjamin Keller, Heather McCarrick, Michael D. Niemack, Yuhan Wang, Zhilei Xu, Kaiwen Zheng

Abstract: The Simons Observatory (SO) includes four telescopes that will measure the temperature and polarization of the cosmic microwave background using over 60,000 highly sensitive transition-edge bolometers (TES). These multichroic TES bolometers are read out by a microwave RF SQUID multiplexing system with a multiplexing factor of 910. Given that both TESes and SQUIDs are susceptible to magnetic field… ▽ More The Simons Observatory (SO) includes four telescopes that will measure the temperature and polarization of the cosmic microwave background using over 60,000 highly sensitive transition-edge bolometers (TES). These multichroic TES bolometers are read out by a microwave RF SQUID multiplexing system with a multiplexing factor of 910. Given that both TESes and SQUIDs are susceptible to magnetic field pickup and that it is hard to predict how they will respond to such fields, it is important to characterize the magnetic response of these systems empirically. This information can then be used to limit spurious signals by informing magnetic shielding designs for the detectors and readout. This paper focuses on measurements of magnetic pickup with different magnetic shielding configurations for the SO universal multiplexing module (UMM), which contains the SQUIDs, associated resonators, and TES bias circuit. The magnetic pickup of a prototype UMM was tested under three shielding configurations: no shielding (copper packaging), aluminum packaging for the UMM, and a tin/lead-plated shield surrounding the entire dilution refrigerator 100 mK cold stage. The measurements show that the aluminum packaging outperforms the copper packaging by a shielding factor of 8-10, and adding the tin/lead-plated 1K shield further increases the relative shielding factor in the aluminum configuration by 1-2 orders of magnitude. △ Less

Submitted 1 March, 2023; v1 submitted 22 November, 2021; originally announced November 2021.

Comments: 7 pages, 4 figure, conference proceedings submitted to the Journal of Low Temperature Physics; includes updates in response to reviewer comments

Journal ref: J Low Temp Phys 209, 667-676 (2022)

Path probability ratios for Langevin dynamics -- exact and approximate

Authors: Stefanie Kieninger, Bettina G. Keller

Abstract: Path reweighting is a principally exact method to estimate dynamic properties from biased simulations - provided that the path probability ratio matches the stochastic integrator used in the simulation. Previously reported path probability ratios match the Euler-Maruyama scheme for overdamped Langevin dynamics. Since MD simulations use Langevin dynamics rather than overdamped Langevin dynamics, th… ▽ More Path reweighting is a principally exact method to estimate dynamic properties from biased simulations - provided that the path probability ratio matches the stochastic integrator used in the simulation. Previously reported path probability ratios match the Euler-Maruyama scheme for overdamped Langevin dynamics. Since MD simulations use Langevin dynamics rather than overdamped Langevin dynamics, this severely impedes the application of path reweighting methods. Here, we derive the path probability ratio $M_L$ for Langevin dynamics propagated by a variant of the Langevin Leapfrog integrator. This new path probability ratio allows for exact reweighting of Langevin dynamics propagated by this integrator. We also show that a previously derived approximate path probability ratio $M_{\mathrm{approx}}$ differs from the exact $M_L$ only by $\mathcal{O}(ξ^4Δt^4)$, and thus yields highly accurate dynamic reweighting results. ($Δt$ is the integration time step, $ξ$ is the collision rate.) The results are tested and the efficiency of path-reweighting is explored using butane as an example. △ Less

Submitted 1 March, 2021; v1 submitted 25 November, 2020; originally announced November 2020.

Journal ref: J. Chem. Phys, 154, (2021), 094102

Markov models from the Square Root Approximation of the Fokker-Planck equation: calculating the grid-dependent flux

Authors: Luca Donati, Marcus Weber, Bettina G. Keller

Abstract: Molecular dynamics are extremely complex, yet understanding the slow components of their dynamics is essential to understanding their macroscopic properties. To achieve this, one models the molecular dynamics as a stochastic process and analyses the dominant eigenfunctions of the associated Fokker-Planck operator, or of closely related transfer operators. So far, the calculation of the discretized… ▽ More Molecular dynamics are extremely complex, yet understanding the slow components of their dynamics is essential to understanding their macroscopic properties. To achieve this, one models the molecular dynamics as a stochastic process and analyses the dominant eigenfunctions of the associated Fokker-Planck operator, or of closely related transfer operators. So far, the calculation of the discretized operators requires extensive molecular dynamics simulations. The Square-root approximation of the Fokker-Planck equation is a method to calculate transition rates as a ratio of the Boltzmann densities of neighboring grid cells times a flux, and can in principle be calculated without a simulation. In a previous work we still used molecular dynamics simulations to determine the flux. Here, we propose several methods to calculate the exact or approximate flux for various grid types, and thus estimate the rate matrix without a simulation. Using model potentials we test computational efficiency of the methods, and the accuracy with which they reproduce the dominant eigenfunctions and eigenvalues. For these model potentials, rate matrices with up to $\mathcal{O}(10^6)$ states can be obtained within seconds on a single high-performance compute server if regular grids are used. △ Less

Submitted 13 November, 2020; v1 submitted 7 October, 2020; originally announced October 2020.

Dynamical reweighting methods for Markov models

Authors: Stefanie Kieninger, Luca Donati, Bettina G. Keller

Abstract: Markov State Models (MSM) are widely used to elucidate dynamic properties of molecular systems from unbiased Molecular Dynamics (MD). However, the implementation of reweighting schemes for MSMs to analyze biased simulations, for example produced by enhanced sampling techniques, is still at an early stage of development. Several dynamical reweighing approaches have been proposed, which can be class… ▽ More Markov State Models (MSM) are widely used to elucidate dynamic properties of molecular systems from unbiased Molecular Dynamics (MD). However, the implementation of reweighting schemes for MSMs to analyze biased simulations, for example produced by enhanced sampling techniques, is still at an early stage of development. Several dynamical reweighing approaches have been proposed, which can be classified as approaches based on (i) Kramers rate theory, (ii) rescaling of the probability density flux, (iii) reweighting by formulating a likelihood function, (iv) path reweighting. We present the state-of-the-art and discuss the methodological differences of these methods, their limitations and recent applications. △ Less

Submitted 17 December, 2019; v1 submitted 17 October, 2019; originally announced October 2019.

Journal ref: Curr. Op. Struct. Biol. 61 (2020) 124-131

Estimation of the infinitesimal generator by square-root approximation

Authors: Luca Donati, Martin Heida, Bettina G. Keller, Marcus Weber

Abstract: For the analysis of molecular processes, the estimation of time-scales, i.e., transition rates, is very important. Estimating the transition rates between molecular conformations is -- from a mathematical point of view -- an invariant subspace projection problem. A certain infinitesimal generator acting on function space is projected to a low-dimensional rate matrix. This projection can be perform… ▽ More For the analysis of molecular processes, the estimation of time-scales, i.e., transition rates, is very important. Estimating the transition rates between molecular conformations is -- from a mathematical point of view -- an invariant subspace projection problem. A certain infinitesimal generator acting on function space is projected to a low-dimensional rate matrix. This projection can be performed in two steps. First, the infinitesimal generator is discretized, then the invariant subspace is approxi-mated and used for the subspace projection. In our approach, the discretization will be based on a Voronoi tessellation of the conformational space. We will show that the discretized infinitesimal generator can simply be approximated by the geometric average of the Boltzmann weights of the Voronoi cells. Thus, there is a direct correla-tion between the potential energy surface of molecular structures and the transition rates of conformational changes. We present results for a 2d-diffusion process and Alanine dipeptide. △ Less

Submitted 7 August, 2017; originally announced August 2017.

Journal ref: J. Phys. Condens. Matter 30 (2018) 425201

Girsanov reweighting for path ensembles and Markov state models

Authors: Luca Donati, Carsten Hartmann, Bettina G. Keller

Abstract: The sensitivity of molecular dynamics on changes in the potential energy function plays an important role in understanding the dynamics and function of complex molecules.We present a method to obtain path ensemble averages of a perturbed dynamics from a set of paths generated by a reference dynamics. It is based on the concept of path probability measure and the Girsanov theorem, a result from sto… ▽ More The sensitivity of molecular dynamics on changes in the potential energy function plays an important role in understanding the dynamics and function of complex molecules.We present a method to obtain path ensemble averages of a perturbed dynamics from a set of paths generated by a reference dynamics. It is based on the concept of path probability measure and the Girsanov theorem, a result from stochastic analysis to estimate a change of measure of a path ensemble. Since Markov state models (MSM) of the molecular dynamics can be formulated as a combined phase-space and path ensemble average, the method can be extended toreweight MSMs by combining it with a reweighting of the Boltzmann distribution. We demonstrate how to efficiently implement the Girsanov reweighting in a molecular dynamics simulation program by calculating parts of the reweighting factor "on the fly" during the simulation, and we benchmark the method on test systems ranging from a two-dimensional diffusion process to an artificial many-body system and alanine dipeptide and valine dipeptide in implicit and explicit water. The method can be used to study the sensitivity of molecular dynamics on external perturbations as well as to reweight trajectories generated by enhanced sampling schemes to the original dynamics. △ Less

Submitted 16 March, 2017; originally announced March 2017.

Bayesian hidden Markov model analysis of single-molecule force spectroscopy: Characterizing kinetics under measurement uncertainty

Authors: John D. Chodera, Phillip Elms, Frank Noé, Bettina Keller, Christian M. Kaiser, Aaron Ewall-Wice, Susan Marqusee, Carlos Bustamante, Nina Singhal Hinrichs

Abstract: Single-molecule force spectroscopy has proven to be a powerful tool for studying the kinetic behavior of biomolecules. Through application of an external force, conformational states with small or transient populations can be stabilized, allowing them to be characterized and the statistics of individual trajectories studied to provide insight into biomolecular folding and function. Because the obs… ▽ More Single-molecule force spectroscopy has proven to be a powerful tool for studying the kinetic behavior of biomolecules. Through application of an external force, conformational states with small or transient populations can be stabilized, allowing them to be characterized and the statistics of individual trajectories studied to provide insight into biomolecular folding and function. Because the observed quantity (force or extension) is not necessarily an ideal reaction coordinate, individual observations cannot be uniquely associated with kinetically distinct conformations. While maximum-likelihood schemes such as hidden Markov models have solved this problem for other classes of single-molecule experiments by using temporal information to aid in the inference of a sequence of distinct conformational states, these methods do not give a clear picture of how precisely the model parameters are determined by the data due to instrument noise and finite-sample statistics, both significant problems in force spectroscopy. We solve this problem through a Bayesian extension that allows the experimental uncertainties to be directly quantified, and build in detailed balance to further reduce uncertainty through physical constraints. We illustrate the utility of this approach in characterizing the three-state kinetic behavior of an RNA hairpin in a stationary optical trap. △ Less

Submitted 5 August, 2011; originally announced August 2011.

Evaluation of Authors and Journals

Authors: Joseph B. Keller

Abstract: A method is presented for evaluating authors on the basis of citations. It assigns to each author a citation score which depends upon the number of times he is cited, and upon the scores of the citers. The scores are found to be the components of an eigenvector of a normalized citation matrix. The same method can be applied to citation of journals by other journals, to evaluating teams in a leag… ▽ More A method is presented for evaluating authors on the basis of citations. It assigns to each author a citation score which depends upon the number of times he is cited, and upon the scores of the citers. The scores are found to be the components of an eigenvector of a normalized citation matrix. The same method can be applied to citation of journals by other journals, to evaluating teams in a league [1], etc. △ Less

Submitted 5 October, 2008; originally announced October 2008.

Comments: 6 pages

Probability distribution of the resistance of a random network

Authors: Thomas Callaghan, Joseph B. Keller

Abstract: The probability density of the resistance of a two dimensional rectangular network between two conducting plates is calculated. The nodes form an $M$ by $N$ lattice, and each edge has a random resistance. The Monte Carlo method is used. The probability density of the resistance of a two dimensional rectangular network between two conducting plates is calculated. The nodes form an $M$ by $N$ lattice, and each edge has a random resistance. The Monte Carlo method is used. △ Less

Submitted 27 March, 2008; originally announced March 2008.

Comments: 10 pages total, 5 figures

Approximate Equations for Large Scale Atmospheric Motions

Authors: Joseph B. Keller, Lu Ting

Abstract: A systematic derivation of a set of equations governing large scale atmospheric motions is presented. They are derived by introducing new variables scaled in terms of a small parameter.The solution is expanded in powers of this parameter.This leads to the hydrostatic pressure and geostrophic wind equations.The resulting set of equations is similar to that proposed by J. Charney. A systematic derivation of a set of equations governing large scale atmospheric motions is presented. They are derived by introducing new variables scaled in terms of a small parameter.The solution is expanded in powers of this parameter.This leads to the hydrostatic pressure and geostrophic wind equations.The resulting set of equations is similar to that proposed by J. Charney. △ Less

Submitted 23 June, 2006; v1 submitted 13 June, 2006; originally announced June 2006.

Comments: 9 pages, no references, no figures

Report number: Institute for Mathematics and Mechanics, New York University, New York, N.Y. Report. May, 1951