-
Fault Localization in a Microfabricated Surface Ion Trap using Diamond Nitrogen-Vacancy Center Magnetometry
Authors:
Pauli Kehayias,
Matthew A. Delaney,
Raymond A. Haltli,
Susan M. Clark,
Melissa C. Revelle,
Andrew M. Mounce
Abstract:
As quantum computing hardware becomes more complex with ongoing design innovations and growing capabilities, the quantum computing community needs increasingly powerful techniques for fabrication failure root-cause analysis. This is especially true for trapped-ion quantum computing. As trapped-ion quantum computing aims to scale to thousands of ions, the electrode numbers are growing to several hu…
▽ More
As quantum computing hardware becomes more complex with ongoing design innovations and growing capabilities, the quantum computing community needs increasingly powerful techniques for fabrication failure root-cause analysis. This is especially true for trapped-ion quantum computing. As trapped-ion quantum computing aims to scale to thousands of ions, the electrode numbers are growing to several hundred with likely integrated-photonic components also adding to the electrical and fabrication complexity, making faults even harder to locate. In this work, we used a high-resolution quantum magnetic imaging technique, based on nitrogen-vacancy (NV) centers in diamond, to investigate short-circuit faults in an ion trap chip. We imaged currents from these short-circuit faults to ground and compared to intentionally-created faults, finding that the root-cause of the faults was failures in the on-chip trench capacitors. This work, where we exploited the performance advantages of a quantum magnetic sensing technique to troubleshoot a piece of quantum computing hardware, is a unique example of the evolving synergy between emerging quantum technologies to achieve capabilities that were previously inaccessible.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Super-resolution diamond magnetic microscopy of superparamagnetic nanoparticles
Authors:
Nazanin Mosavian,
Forrest Hubert,
Janis Smits,
Pauli Kehayias,
Yaser Silani,
Bryan A. Richards,
Victor M. Acosta
Abstract:
Scanning-probe and wide-field magnetic microscopes based on Nitrogen-Vacancy (NV) centers in diamond have enabled remarkable advances in the study of biology and materials, but each method has drawbacks. Here, we implement an alternative method for nanoscale magnetic microscopy based on optical control of the charge state of NV centers in a dense layer near the diamond surface. By combining a donu…
▽ More
Scanning-probe and wide-field magnetic microscopes based on Nitrogen-Vacancy (NV) centers in diamond have enabled remarkable advances in the study of biology and materials, but each method has drawbacks. Here, we implement an alternative method for nanoscale magnetic microscopy based on optical control of the charge state of NV centers in a dense layer near the diamond surface. By combining a donut-beam super-resolution technique with optically detected magnetic resonance spectroscopy, we imaged the magnetic fields produced by single 30-nm iron-oxide nanoparticles. The magnetic microscope has a lateral spatial resolution of ~100 nm, and it resolves the individual magnetic dipole features from clusters of nanoparticles with interparticle spacings down to ~190 nm. The magnetic feature amplitudes are more than an order of magnitude larger than those obtained by confocal magnetic microscopy due to the smaller characteristic NV-nanoparticle distance within nearby sensing voxels. We analyze the magnetic point-spread function and sensitivity as a function of the microscope's spatial resolution and identify sources of background fluorescence that limit the present performance, including diamond second-order Raman emission and imperfect NV charge-state control. Our method, which uses less than 10 mW laser power and can be parallelized by patterned illumination, introduces a new format for nanoscale magnetic imaging.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
Fabrication of thin diamond membranes by Ne$^+$ implantation
Authors:
Luca Basso,
Michael Titze,
Jacob Henshaw,
Pauli Kehayias,
Rong Cong,
Maziar Saleh Ziabari,
Tzu-Ming Lu,
Michael P. Lilly,
Andrew M. Mounce
Abstract:
Color centers in diamond are one of the most promising tools for quantum information science. Of particular interest is the use of single-crystal diamond membranes with nanoscale-thickness as hosts for color centers. Indeed, such structures guarantee a better integration with a variety of other quantum materials or devices, which can aid the development of diamond-based quantum technologies, from…
▽ More
Color centers in diamond are one of the most promising tools for quantum information science. Of particular interest is the use of single-crystal diamond membranes with nanoscale-thickness as hosts for color centers. Indeed, such structures guarantee a better integration with a variety of other quantum materials or devices, which can aid the development of diamond-based quantum technologies, from nanophotonics to quantum sensing. A common approach for membrane production is what is known as "smart-cut", a process where membranes are exfoliated from a diamond substrate after the creation of a thin sub-surface amorphous carbon layer by He$^+$ implantation. Due to the high ion fluence required, this process can be time-consuming. In this work, we demonstrated the production of thin diamond membranes by neon implantation of diamond substrates. With the target of obtaining membranes of $\sim$ 200 nm thickness and finding the critical damage threshold, we implanted different diamonds with 300 keV Ne$^+$ ions at different fluences. We characterized the structural properties of the implanted diamonds and the resulting membranes through SEM, Raman spectroscopy, and photoluminescence spectroscopy. We also found that a SRIM model based on a two-layer diamond/sp$^2$-carbon target better describes ion implantation, allowing us to estimate the diamond critical damage threshold for Ne$^+$ implantation. Compared to He$^+$ smart-cut, the use of a heavier ion like Ne$^+$ results in a ten-fold decrease in the ion fluence required to obtain diamond membranes and allows to obtain shallower smart-cuts, i.e. thinner membranes, at the same ion energy.
△ Less
Submitted 30 May, 2023;
originally announced May 2023.
-
Nuclear quadrupole resonance spectroscopy with a femtotesla diamond magnetometer
Authors:
Yaser Silani,
Janis Smits,
Ilja Fescenko,
Michael W. Malone,
Andrew F. McDowell,
Andrey Jarmola,
Pauli Kehayias,
Bryan Richards,
Nazanin Mosavian,
Nathaniel Ristoff,
Victor M. Acosta
Abstract:
Sensitive Radio-Frequency (RF) magnetometers that can detect oscillating magnetic fields at the femtotesla level are needed for demanding applications such as Nuclear Quadrupole Resonance (NQR) spectroscopy. RF magnetometers based on Nitrogen-Vacancy (NV) centers in diamond have been predicted to offer femtotesla sensitivity, but published experiments have largely been limited to the picotesla lev…
▽ More
Sensitive Radio-Frequency (RF) magnetometers that can detect oscillating magnetic fields at the femtotesla level are needed for demanding applications such as Nuclear Quadrupole Resonance (NQR) spectroscopy. RF magnetometers based on Nitrogen-Vacancy (NV) centers in diamond have been predicted to offer femtotesla sensitivity, but published experiments have largely been limited to the picotesla level. Here, we demonstrate a femtotesla RF magnetometer based on an NV-doped diamond membrane inserted between two ferrite flux concentrators. The device operates in bias magnetic fields of 2-10 microtesla and provides a ~300-fold amplitude enhancement within the diamond for RF magnetic fields in the 0.07-3.6 MHz range. The magnetometer's sensitivity is ~70 fT s^{1/2} at 0.35 MHz, and the noise floor decreases to below 2 fT after 1 hour of acquisition. We used this sensor to detect the 3.6 MHz NQR signal of 14N in sodium nitrite powder at room temperature. NQR signals are amplified by a resonant RF coil wrapped around the sample, allowing for higher signal-to-noise ratio detection. The diamond RF magnetometer's recovery time after a strong RF pulse is ~35 us, limited by the coil ring-down time. The sodium-nitrite NQR frequency shifts linearly with temperature as -1.00 +/- 0.02 kHz/K, the magnetization dephasing time is T2* = 887 +/- 51 us, and a spin-lock spin-echo pulse sequence extends the signal lifetime to 332 +/- 23 ms, all consistent with coil-based NQR studies. Our results expand the sensitivity frontier of diamond magnetometers to the femtotesla range, with potential applications in security, medical imaging, and materials science.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
High-Resolution Short-Circuit Fault Localization in a Multi-Layer Integrated Circuit using a Quantum Diamond Microscope
Authors:
P. Kehayias,
J. Walraven,
A. L. Rodarte,
A. M. Mounce
Abstract:
As integrated circuit (IC) geometry and packaging become more sophisticated with ongoing fabrication and design innovations, the electrical engineering community needs increasingly-powerful failure analysis (FA) methods to meet the growing troubleshooting challenges of multi-layer (with multiple metal layers) and multi-chip components. In this work, we investigate a new electronics FA method using…
▽ More
As integrated circuit (IC) geometry and packaging become more sophisticated with ongoing fabrication and design innovations, the electrical engineering community needs increasingly-powerful failure analysis (FA) methods to meet the growing troubleshooting challenges of multi-layer (with multiple metal layers) and multi-chip components. In this work, we investigate a new electronics FA method using a quantum diamond microscope (QDM) to image the magnetic fields from short-circuit faults. After quantifying the performance by detecting short-circuit faults in a multi-layer silicon die, we assess how a QDM would detect faults in a heterogeneously integrated (HI) die stack. This work establishes QDM-based magnetic imaging as a competitive technique for electronics FA, offering high spatial resolution, high sensitivity, and robust instrumentation. We anticipate these advantages to be especially useful for finding faults deep within chip-stack ICs with many metal layers, optically-opaque layers, or optically-scattering layers.
△ Less
Submitted 2 February, 2023;
originally announced February 2023.
-
Current Paths in an Atomic Precision Advanced Manufactured Device Imaged by Nitrogen-Vacancy Diamond Magnetic Microscopy
Authors:
Luca Basso,
Pauli Kehayias,
Jacob Henshaw,
Maziar Saleh Ziabari,
Heejun Byeon,
Michael P. Lilly,
Ezra Bussmann,
Deanna M. Campbell,
Shashank Misra,
Andrew M. Mounce
Abstract:
The recently-developed ability to control phosphorous-do** of silicon at an atomic level using scanning tunneling microscopy (STM), a technique known as atomic-precision-advanced-manufacturing (APAM), has allowed us to tailor electronic devices with atomic precision, and thus has emerged as a way to explore new possibilities in Si electronics. In these applications, critical questions include wh…
▽ More
The recently-developed ability to control phosphorous-do** of silicon at an atomic level using scanning tunneling microscopy (STM), a technique known as atomic-precision-advanced-manufacturing (APAM), has allowed us to tailor electronic devices with atomic precision, and thus has emerged as a way to explore new possibilities in Si electronics. In these applications, critical questions include where current flow is actually occurring in or near APAM structures as well as whether leakage currents are present. In general, detection and map** of current flow in APAM structures are valuable diagnostic tools to obtain reliable devices in digital-enhanced applications. In this paper, we performed nitrogen-vacancy (NV) wide-field magnetic imaging of stray magnetic fields from surface current densities flowing in an APAM test device over a mm-field of view with μm-resolution. To do this, we integrated a diamond having a surface NV ensemble with the device (patterned in two parallel mm-sized ribbons), then mapped the magnetic field from the DC current injected in the APAM device in a home-built NV wide-field microscope. The 2D magnetic field maps were used to reconstruct the surface current density, allowing us to obtain information on current paths, device failures such as choke points where current flow is impeded, and current leakages outside the APAM-defined P-doped regions. Analysis on the current density reconstructed map showed a projected sensitivity of ~0.03 A/m, corresponding to a smallest detectable current in the 200 μm-wide APAM ribbon of ~6 μA. These results demonstrate the failure analysis capability of NV wide-field magnetometry for APAM materials, opening the possibility to investigate other cutting-edge microelectronic devices.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
Directional Detection of Dark Matter Using Solid-State Quantum Sensing
Authors:
Reza Ebadi,
Mason C. Marshall,
David F. Phillips,
Johannes Cremer,
Tao Zhou,
Michael Titze,
Pauli Kehayias,
Maziar Saleh Ziabari,
Nazar Delegan,
Surjeet Rajendran,
Alexander O. Sushkov,
F. Joseph Heremans,
Edward S. Bielejec,
Martin V. Holt,
Ronald L. Walsworth
Abstract:
Next-generation dark matter (DM) detectors searching for weakly interacting massive particles (WIMPs) will be sensitive to coherent scattering from solar neutrinos, demanding an efficient background-signal discrimination tool. Directional detectors improve sensitivity to WIMP DM despite the irreducible neutrino background. Wide-bandgap semiconductors offer a path to directional detection in a high…
▽ More
Next-generation dark matter (DM) detectors searching for weakly interacting massive particles (WIMPs) will be sensitive to coherent scattering from solar neutrinos, demanding an efficient background-signal discrimination tool. Directional detectors improve sensitivity to WIMP DM despite the irreducible neutrino background. Wide-bandgap semiconductors offer a path to directional detection in a high-density target material. A detector of this type operates in a hybrid mode. The WIMP or neutrino-induced nuclear recoil is detected using real-time charge, phonon, or photon collection. The directional signal, however, is imprinted as a durable sub-micron damage track in the lattice structure. This directional signal can be read out by a variety of atomic physics techniques, from point defect quantum sensing to x-ray microscopy. In this white paper, we present the detector principle and review the status of the experimental techniques required for directional readout of nuclear recoil tracks. Specifically, we focus on diamond as a target material; it is both a leading platform for emerging quantum technologies and a promising component of next-generation semiconductor electronics. Based on the development and demonstration of directional readout in diamond over the next decade, a future WIMP detector will leverage or motivate advances in multiple disciplines towards precision dark matter and neutrino physics.
△ Less
Submitted 14 June, 2023; v1 submitted 11 March, 2022;
originally announced March 2022.
-
Measurement and Simulation of the Magnetic Fields from a 555 Timer Integrated Circuit using a Quantum Diamond Microscope and Finite Element Analysis
Authors:
P. Kehayias,
E. V. Levine,
L. Basso,
J. Henshaw,
M. Saleh Ziabari,
M. Titze,
R. Haltli,
J. Okoro,
D. R. Tibbetts,
D. M. Udoni,
E. Bielejec,
M. P. Lilly,
T. M. Lu,
P. D. D. Schwindt,
A. M. Mounce
Abstract:
Quantum Diamond Microscope (QDM) magnetic field imaging is an emerging interrogation and diagnostic technique for integrated circuits (ICs). To date, the ICs measured with a QDM were either too complex for us to predict the expected magnetic fields and benchmark the QDM performance, or were too simple to be relevant to the IC community. In this paper, we establish a 555 timer IC as a "model system…
▽ More
Quantum Diamond Microscope (QDM) magnetic field imaging is an emerging interrogation and diagnostic technique for integrated circuits (ICs). To date, the ICs measured with a QDM were either too complex for us to predict the expected magnetic fields and benchmark the QDM performance, or were too simple to be relevant to the IC community. In this paper, we establish a 555 timer IC as a "model system" to optimize QDM measurement implementation, benchmark performance, and assess IC device functionality. To validate the magnetic field images taken with a QDM, we used a SPICE electronic circuit simulator and Finite Element Analysis (FEA) to model the magnetic fields from the 555 die for two functional states. We compare the advantages and the results of three IC-diamond measurement methods, confirm that the measured and simulated magnetic images are consistent, identify the magnetic signatures of current paths within the device, and discuss using this model system to advance QDM magnetic imaging as an IC diagnostic tool.
△ Less
Submitted 19 January, 2022; v1 submitted 23 September, 2021;
originally announced September 2021.
-
A fitting algorithm for optimizing ion implantation energies and fluences
Authors:
Pauli Kehayias,
Jacob Henshaw,
Maziar Saleh Ziabari,
Michael Titze,
Edward Bielejec,
Michael P. Lilly,
Andrew M. Mounce
Abstract:
We describe a method to automatically generate an ion implantation recipe, a set of energies and fluences, to produce a desired defect density profile in a solid using the fewest required energies. We simulate defect density profiles for a range of ion energies, fit them with an appropriate function, and interpolate to yield defect density profiles at arbitrary ion energies. Given $N$ energies, we…
▽ More
We describe a method to automatically generate an ion implantation recipe, a set of energies and fluences, to produce a desired defect density profile in a solid using the fewest required energies. We simulate defect density profiles for a range of ion energies, fit them with an appropriate function, and interpolate to yield defect density profiles at arbitrary ion energies. Given $N$ energies, we then optimize a set of $N$ energy-fluence pairs to match a given target defect density profile. Finally, we find the minimum $N$ such that the error between the target defect density profile and the defect density profile generated by the $N$ energy-fluence pairs is less than a given threshold. Inspired by quantum sensing applications with nitrogen-vacancy centers in diamond, we apply our technique to calculate optimal ion implantation recipes to create uniform-density 1 $μ$m surface layers of $^{15}$N or vacancies (using $^4$He).
△ Less
Submitted 27 May, 2021; v1 submitted 3 March, 2021;
originally announced March 2021.
-
Magnetic Field Fingerprinting of Integrated Circuit Activity with a Quantum Diamond Microscope
Authors:
Matthew J. Turner,
Nicholas Langellier,
Rachel Bainbridge,
Dan Walters,
Srujan Meesala,
Thomas M. Babinec,
Pauli Kehayias,
Amir Yacoby,
Evelyn Hu,
Marko Lončar,
Ronald L. Walsworth,
Edlyn V. Levine
Abstract:
Current density distributions in active integrated circuits (ICs) result in patterns of magnetic fields that contain structural and functional information about the IC. Magnetic fields pass through standard materials used by the semiconductor industry and provide a powerful means to fingerprint IC activity for security and failure analysis applications. Here, we demonstrate high spatial resolution…
▽ More
Current density distributions in active integrated circuits (ICs) result in patterns of magnetic fields that contain structural and functional information about the IC. Magnetic fields pass through standard materials used by the semiconductor industry and provide a powerful means to fingerprint IC activity for security and failure analysis applications. Here, we demonstrate high spatial resolution, wide field-of-view, vector magnetic field imaging of static (DC) magnetic field emanations from an IC in different active states using a Quantum Diamond Microscope (QDM). The QDM employs a dense layer of fluorescent nitrogen-vacancy (NV) quantum defects near the surface of a transparent diamond substrate placed on the IC to image magnetic fields. We show that QDM imaging achieves simultaneous $\sim10$ $μ$m resolution of all three vector magnetic field components over the 3.7 mm $\times$ 3.7 mm field-of-view of the diamond. We study activity arising from spatially-dependent current flow in both intact and decapsulated field-programmable gate arrays (FPGAs); and find that QDM images can determine pre-programmed IC active states with high fidelity using machine-learning classification methods.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
A physically unclonable function using NV diamond magnetometry and micromagnet arrays
Authors:
Pauli Kehayias,
Ezra Bussmann,
Tzu-Ming Lu,
Andrew M. Mounce
Abstract:
A physically unclonable function (PUF) is an embedded hardware security measure that provides protection against counterfeiting. Here we present our work on using an array of randomly-magnetized micron-sized ferromagnetic bars (micromagnets) as a PUF. We employ a 4 $μ$m thick surface layer of nitrogen-vacancy (NV) centers in diamond to image the magnetic fields from each micromagnet in the array,…
▽ More
A physically unclonable function (PUF) is an embedded hardware security measure that provides protection against counterfeiting. Here we present our work on using an array of randomly-magnetized micron-sized ferromagnetic bars (micromagnets) as a PUF. We employ a 4 $μ$m thick surface layer of nitrogen-vacancy (NV) centers in diamond to image the magnetic fields from each micromagnet in the array, after which we extract the magnetic polarity of each micromagnet using image analysis techniques. After evaluating the randomness of the micromagnet array PUF and the sensitivity of the NV readout, we conclude by discussing the possible future enhancements for improved security and magnetic readout.
△ Less
Submitted 18 February, 2020;
originally announced February 2020.
-
Diamond magnetometer enhanced by ferrite flux concentrators
Authors:
Ilja Fescenko,
Andrey Jarmola,
Igor Savukov,
Pauli Kehayias,
Janis Smits,
Joshua Damron,
Nathaniel Ristoff,
Nazanin Mosavian,
Victor M. Acosta
Abstract:
Magnetometers based on nitrogen-vacancy (NV) centers in diamond are promising room-temperature, solid-state sensors. However, their reported sensitivity to magnetic fields at low frequencies (<1 kHz) is presently >10 pT s^{1/2}, precluding potential applications in medical imaging, geoscience, and navigation. Here we show that high-permeability magnetic flux concentrators, which collect magnetic f…
▽ More
Magnetometers based on nitrogen-vacancy (NV) centers in diamond are promising room-temperature, solid-state sensors. However, their reported sensitivity to magnetic fields at low frequencies (<1 kHz) is presently >10 pT s^{1/2}, precluding potential applications in medical imaging, geoscience, and navigation. Here we show that high-permeability magnetic flux concentrators, which collect magnetic flux from a larger area and concentrate it into the diamond sensor, can be used to improve the sensitivity of diamond magnetometers. By inserting an NV-doped diamond membrane between two ferrite cones in a bowtie configuration, we realize a ~250-fold increase of the magnetic field amplitude within the diamond. We demonstrate a sensitivity of ~0.9 pT s^{1/2} to magnetic fields in the frequency range between 10 and 1000 Hz, using a dual-resonance modulation technique to suppress the effect of thermal shifts of the NV spin levels. This is accomplished using 200 mW of laser power and 20 mW of microwave power. This work introduces a new dimension for diamond quantum sensors by using micro-structured magnetic materials to manipulate magnetic fields.
△ Less
Submitted 14 November, 2019; v1 submitted 12 November, 2019;
originally announced November 2019.
-
Principles and Techniques of the Quantum Diamond Microscope
Authors:
Edlyn V. Levine,
Matthew J. Turner,
Pauli Kehayias,
Connor A. Hart,
Nicholas Langellier,
Raisa Trubko,
David R. Glenn,
Roger R. Fu,
Ronald L. Walsworth
Abstract:
We provide an overview of the experimental techniques, measurement modalities, and diverse applications of the Quantum Diamond Microscope (QDM). The QDM employs a dense layer of fluorescent nitrogen-vacancy (NV) color centers near the surface of a transparent diamond chip on which a sample of interest is placed. NV electronic spins are coherently probed with microwaves and optically initialized an…
▽ More
We provide an overview of the experimental techniques, measurement modalities, and diverse applications of the Quantum Diamond Microscope (QDM). The QDM employs a dense layer of fluorescent nitrogen-vacancy (NV) color centers near the surface of a transparent diamond chip on which a sample of interest is placed. NV electronic spins are coherently probed with microwaves and optically initialized and read out to provide spatially resolved maps of local magnetic fields. NV fluorescence is measured simultaneously across the diamond surface, resulting in a wide-field, two-dimensional magnetic field image with adjustable spatial pixel size set by the parameters of the imaging system. NV measurement protocols are tailored for imaging of broadband and narrowband fields, from DC to GHz frequencies. Here we summarize the physical principles common to diverse implementations of the QDM and review example applications of the technology in geoscience, biology, and materials science.
△ Less
Submitted 30 September, 2019;
originally announced October 2019.
-
Imaging crystal stress in diamond using ensembles of nitrogen-vacancy centers
Authors:
P. Kehayias,
M. J. Turner,
R. Trubko,
J. M. Schloss,
C. A. Hart,
M. Wesson,
D. R. Glenn,
R. L. Walsworth
Abstract:
We present a micrometer-resolution millimeter-field-of-view stress imaging method for diamonds containing a thin surface layer of nitrogen vacancy (NV) centers. In this method, we reconstruct stress tensor elements over a two-dimensional field of view from NV optically-detected magnetic resonance (ODMR) spectra. We use this technique to study how stress inhomogeneity affects NV magnetometry perfor…
▽ More
We present a micrometer-resolution millimeter-field-of-view stress imaging method for diamonds containing a thin surface layer of nitrogen vacancy (NV) centers. In this method, we reconstruct stress tensor elements over a two-dimensional field of view from NV optically-detected magnetic resonance (ODMR) spectra. We use this technique to study how stress inhomogeneity affects NV magnetometry performance, and show how NV stress imaging is a useful and direct way to assess these effects. This new tool for map** stress in diamond will aid optimization of NV-diamond sensing, with wide-ranging applications in the physical and life sciences.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Two-dimensional nuclear magnetic resonance spectroscopy with a microfluidic diamond quantum sensor
Authors:
Janis Smits,
Joshua Damron,
Pauli Kehayias,
Andrew F. McDowell,
Nazanin Mosavian,
Ilja Fescenko,
Nathaniel Ristoff,
Abdelghani Laraoui,
Andrey Jarmola,
Victor M. Acosta
Abstract:
Quantum sensors based on nitrogen-vacancy centers in diamond have emerged as a promising detection modality for nuclear magnetic resonance (NMR) spectroscopy owing to their micron-scale detection volume and non-inductive based detection. A remaining challenge is to realize sufficiently high spectral resolution and concentration sensitivity for multidimensional NMR analysis of picoliter sample volu…
▽ More
Quantum sensors based on nitrogen-vacancy centers in diamond have emerged as a promising detection modality for nuclear magnetic resonance (NMR) spectroscopy owing to their micron-scale detection volume and non-inductive based detection. A remaining challenge is to realize sufficiently high spectral resolution and concentration sensitivity for multidimensional NMR analysis of picoliter sample volumes. Here, we address this challenge by spatially separating the polarization and detection phases of the experiment in a microfluidic platform. We realize a spectral resolution of 0.65 +/- 0.05 Hz, an order-of-magnitude improvement over previous diamond NMR studies. We use the platform to perform two-dimensional correlation spectroscopy of liquid analytes within an effective ~20 picoliter detection volume. The use of diamond quantum sensors as in-line microfluidic NMR detectors is a significant step towards applications in mass-limited chemical analysis and single cell biology.
△ Less
Submitted 9 January, 2019;
originally announced January 2019.
-
Diamond magnetic microscopy of malarial hemozoin nanocrystals
Authors:
Ilja Fescenko,
Abdelghani Laraoui,
Janis Smits,
Nazanin Mosavian,
Pauli Kehayias,
Jong Seto,
Lykourgos Bougas,
Andrey Jarmola,
Victor M. Acosta
Abstract:
Magnetic microscopy of malarial hemozoin nanocrystals was performed using optically detected magnetic resonance imaging of near-surface diamond nitrogen-vacancy centers. Hemozoin crystals were extracted from $Plasmodium$-$falciparum$-infected human blood cells and studied alongside synthetic hemozoin crystals. The stray magnetic fields produced by individual crystals were imaged at room temperatur…
▽ More
Magnetic microscopy of malarial hemozoin nanocrystals was performed using optically detected magnetic resonance imaging of near-surface diamond nitrogen-vacancy centers. Hemozoin crystals were extracted from $Plasmodium$-$falciparum$-infected human blood cells and studied alongside synthetic hemozoin crystals. The stray magnetic fields produced by individual crystals were imaged at room temperature as a function of applied field up to 350 mT. More than 100 nanocrystals were analyzed, revealing the distribution of their magnetic properties. Most crystals ($96\%$) exhibit a linear dependence of stray field magnitude on applied field, confirming hemozoin's paramagnetic nature. A volume magnetic susceptibility $χ=3.4\times10^{-4}$ is inferred using a magnetostatic model informed by correlated scanning electron microscopy measurements of crystal dimensions. A small fraction of nanoparticles (4/82 for $Plasmodium$-produced and 1/41 for synthetic) exhibit a saturation behavior consistent with superparamagnetism. Translation of this platform to the study of living malaria-infected cells may shed new light on hemozoin formation dynamics and their interaction with antimalarial drugs.
△ Less
Submitted 19 September, 2018; v1 submitted 10 August, 2018;
originally announced August 2018.
-
Fourier optical processing enables new capabilities in diamond magnetic imaging
Authors:
Mikael P. Backlund,
Pauli Kehayias,
Ronald L. Walsworth
Abstract:
Diamond-based magnetic field sensors have attracted great interest in recent years. In particular, wide-field magnetic imaging using nitrogen-vacancy (NV) centers in diamond has been previously demonstrated in condensed matter, biological, and paleomagnetic applications. Vector magnetic imaging with NV ensembles typically requires an applied field (>10 G) to separate the contributions from four cr…
▽ More
Diamond-based magnetic field sensors have attracted great interest in recent years. In particular, wide-field magnetic imaging using nitrogen-vacancy (NV) centers in diamond has been previously demonstrated in condensed matter, biological, and paleomagnetic applications. Vector magnetic imaging with NV ensembles typically requires an applied field (>10 G) to separate the contributions from four crystallographic orientations, hindering studies of magnetic samples that require measurement in low or independently specified bias fields. Here we decompose the NV ensemble magnetic resonance spectrum without such a bias field by modulating the collected light at the microscope's Fourier plane. In addition to enabling vector magnetic imaging at arbitrarily low fields, our method can be used to extend the dynamic range at a given bias field. As demonstrated here, optically-detected diamond magnetometry stands to benefit from Fourier optical approaches, which have already found widespread utility in other branches of photonics.
△ Less
Submitted 25 May, 2017;
originally announced May 2017.
-
Solution nuclear magnetic resonance spectroscopy on a nanostructured diamond chip
Authors:
P. Kehayias,
A. Jarmola,
N. Mosavian,
I. Fescenko,
F. M. Benito,
A. Laraoui,
J. Smits,
L. Bougas,
D. Budker,
A. Neumann,
S. R. J. Brueck,
V. M. Acosta
Abstract:
We demonstrate nuclear magnetic resonance (NMR) spectroscopy of picoliter-volume solutions with a nanostructured diamond chip. Using optical interferometric lithography, diamond surfaces were nanostructured with dense, high-aspect-ratio nanogratings, enhancing the surface area by more than a factor of 15 over mm^2 regions of the chip. The nanograting sidewalls were doped with nitrogen-vacancy (NV)…
▽ More
We demonstrate nuclear magnetic resonance (NMR) spectroscopy of picoliter-volume solutions with a nanostructured diamond chip. Using optical interferometric lithography, diamond surfaces were nanostructured with dense, high-aspect-ratio nanogratings, enhancing the surface area by more than a factor of 15 over mm^2 regions of the chip. The nanograting sidewalls were doped with nitrogen-vacancy (NV) centers so that more than 10 million NV centers in a (25 micrometer)^2 laser spot are located close enough to the diamond surface (5 nm) to detect the NMR spectrum of 1 pL of fluid lying within adjacent nanograting grooves. The platform was used to perform 1H and 19F NMR spectroscopy at room temperature in magnetic fields below 50 mT. Using a solution of CsF in glycerol, we demonstrate that 4 +/- 2 x 10^12 19F spins in a 1 pL volume, can be detected with a signal-to-noise ratio of 3 in 1 s integration. This represents nearly two orders of magnitude improvement in concentration sensitivity over previous NV and picoliter NMR studies.
△ Less
Submitted 5 January, 2017;
originally announced January 2017.
-
Evaluating the paleomagnetic potential of single zircon crystals using the Bishop Tuff
Authors:
Roger R. Fu,
Benjamin P. Weiss,
Eduardo A. Lima,
Pauli Kehayias,
Jefferson F. D. F. Araujo,
David R. Glenn,
Jeff Gelb,
Joshua F. Einsle,
Ann M. Bauer,
Richard J. Harrison,
Guleed A. H. Ali,
Ronald L. Walsworth
Abstract:
Zircon crystals offer a unique combination of suitability for high-precision radiometric dating and high resistance to alteration. Paleomagnetic experiments on ancient zircons may potentially constrain the earliest geodynamo, which holds broad implications for the early Earth interior and atmosphere. However, the ability of zircons to record accurately the geomagnetic field has not been fully demo…
▽ More
Zircon crystals offer a unique combination of suitability for high-precision radiometric dating and high resistance to alteration. Paleomagnetic experiments on ancient zircons may potentially constrain the earliest geodynamo, which holds broad implications for the early Earth interior and atmosphere. However, the ability of zircons to record accurately the geomagnetic field has not been fully demonstrated. Here we conduct thermal and room temperature alternating field (AF) paleointensity experiments on 767.1 thousand year old (ka) zircons from the Bishop Tuff, California. The rapid emplacement of these zircons in a well-characterized magnetic field provides a high-fidelity test of the zircons intrinsic paleomagnetic recording accuracy. Successful dual heating experiments on nine zircons measured using a superconducting quantum interference device (SQUID) microscope yield a mean paleointensity of 46.2 +/- 18.8 microtesla (1sigma), which agrees closely with high-precision results from Bishop Tuff whole rock (43.0 +/- 3.2 microtesla). High-resolution quantum diamond magnetic map**, electron microscopy, and X-ray tomography indicate that the bulk of the remanent magnetization in Bishop Tuff zircons is carried by Fe oxides associated with apatite inclusions, which would be susceptible to destruction via metamorphism and aqueous alteration in older zircons. As such, while zircons can reliably record the geomagnetic field, robust zircon-derived paleomagnetic results require careful characterization of the ferromagnetic carrier and demonstration of their occurrence in primary inclusions. We further conclude that a combination of quantum diamond magnetometry and high-resolution imaging can provide detailed, direct characterization of the ferromagnetic mineralogy of geological samples.
△ Less
Submitted 26 May, 2016;
originally announced May 2016.
-
Coherent population oscillations with nitrogen-vacancy color centers in diamond
Authors:
M. Mrozek,
A. Wojciechowski,
D. S. Rudnicki,
J. Zachorowski,
P. Kehayias,
D. Budker,
W. Gawlik
Abstract:
We present results of our research on two-field (two-frequency) microwave spectroscopy in nitrogen-vacancy (NV-) color centers in a diamond. Both fields are tuned to transitions between the spin sublevels of the NV- ensemble in the 3A2 ground state (one field has a fixed frequency while the second one is scanned). Particular attention is focused on the case where two microwaves fields drive the sa…
▽ More
We present results of our research on two-field (two-frequency) microwave spectroscopy in nitrogen-vacancy (NV-) color centers in a diamond. Both fields are tuned to transitions between the spin sublevels of the NV- ensemble in the 3A2 ground state (one field has a fixed frequency while the second one is scanned). Particular attention is focused on the case where two microwaves fields drive the same transition between two NV- ground state sublevels (ms=0 -> ms=+1). In this case, the observed spectra exhibit a complex narrow structure composed of three Lorentzian resonances positioned at the pump-field frequency. The resonance widths and amplitudes depend on the lifetimes of the levels involved in the transition. We attribute the spectra to coherent population oscillations induced by the two nearly degenerate microwave fields, which we have also observed in real time. The observations agree well with a theoretical model and can be useful for investigation of the NV relaxation mechanisms.
△ Less
Submitted 3 July, 2016; v1 submitted 12 December, 2015;
originally announced December 2015.
-
Longitudinal spin relaxation in nitrogen-vacancy ensembles in diamond
Authors:
M. Mrozek,
D. Rudnicki,
P. Kehayias,
A. Jarmola,
D. Budker,
W. Gawlik
Abstract:
We present an experimental study of the longitudinal electron-spin relaxation of ensembles of negatively charged nitrogen-vacancy (NV ) centers in diamond. The measurements were performed with samples having different NV- concentrations and at different temperatures and magnetic fields. We found that the relaxation rate T1-1 increases when transition frequencies in NV- centers with different orien…
▽ More
We present an experimental study of the longitudinal electron-spin relaxation of ensembles of negatively charged nitrogen-vacancy (NV ) centers in diamond. The measurements were performed with samples having different NV- concentrations and at different temperatures and magnetic fields. We found that the relaxation rate T1-1 increases when transition frequencies in NV- centers with different orientations become degenerate and interpret this as cross-relaxation caused by dipole-dipole interaction.
△ Less
Submitted 9 May, 2015;
originally announced May 2015.
-
Microwave saturation spectroscopy of nitrogen-vacancy ensembles in diamond
Authors:
P. Kehayias,
M. Mrózek,
V. M. Acosta,
A. Jarmola,
D. S. Rudnicki,
R. Folman,
W. Gawlik,
D. Budker
Abstract:
Negatively-charged nitrogen-vacancy (NV$^-$) centers in diamond have generated much recent interest for their use in sensing. The sensitivity improves when the NV ground-state microwave transitions are narrow, but these transitions suffer from inhomogeneous broadening, especially in high-density NV ensembles. To better understand and remove the sources of broadening, we demonstrate room-temperatur…
▽ More
Negatively-charged nitrogen-vacancy (NV$^-$) centers in diamond have generated much recent interest for their use in sensing. The sensitivity improves when the NV ground-state microwave transitions are narrow, but these transitions suffer from inhomogeneous broadening, especially in high-density NV ensembles. To better understand and remove the sources of broadening, we demonstrate room-temperature spectral "hole burning" of the NV ground-state transitions. We find that hole burning removes the broadening caused by magnetic fields from $^{13}$C nuclei and demonstrate that it can be used for magnetic-field-insensitive thermometry.
△ Less
Submitted 9 March, 2014;
originally announced March 2014.
-
The Infrared Absorption Band and Vibronic Structure of the Nitrogen-Vacancy Center in Diamond
Authors:
P. Kehayias,
M. W. Doherty,
D. English,
R. Fischer,
A. Jarmola,
K. Jensen,
N. Leefer,
P. Hemmer,
N. B. Manson,
D. Budker
Abstract:
Negatively-charged nitrogen-vacancy (NV$^-$) color centers in diamond have generated much interest for use in quantum technology. Despite the progress made in develo** their applications, many questions about the basic properties of NV$^-$ centers remain unresolved. Understanding these properties can validate theoretical models of NV$^-$, improve their use in applications, and support their deve…
▽ More
Negatively-charged nitrogen-vacancy (NV$^-$) color centers in diamond have generated much interest for use in quantum technology. Despite the progress made in develo** their applications, many questions about the basic properties of NV$^-$ centers remain unresolved. Understanding these properties can validate theoretical models of NV$^-$, improve their use in applications, and support their development into competitive quantum devices. In particular, knowledge of the phonon modes of the $^1A_1$ electronic state is key for understanding the optical pum** process. Using pump-probe spectroscopy, we measured the phonon sideband of the ${^1}E\rightarrow{^1}A_1$ electronic transition in the NV$^-$ center. From this we calculated the ${^1}E\rightarrow{^1}A_1$ one-phonon absorption spectrum and found it to differ from that of the ${^3}E\rightarrow{^3}A_2$ transition, a result which is not anticipated by previous group-theoretical models of the NV$^-$ electronic states. We identified a high-energy 169 meV localized phonon mode of the $^1A_1$ level.
△ Less
Submitted 2 October, 2013; v1 submitted 25 January, 2013;
originally announced January 2013.
-
Magnetometry with nitrogen-vacancy ensembles in diamond based on infrared absorption in a doubly resonant optical cavity
Authors:
Yannick Dumeige,
Mayeul Chipaux,
Vincent Jacques,
François Treussart,
Jean-François Roch,
Thierry Debuisschert,
Victor Acosta,
Andrey Jarmola,
Kasper Jensen,
Pauli Kehayias,
Dmitry Budker
Abstract:
We propose to use an optical cavity to enhance the sensitivity of magnetometers relying on the detection of the spin state of high-density nitrogen-vacancy ensembles in diamond using infrared optical absorption. The role of the cavity is to obtain a contrast in the absorption-detected magnetic resonance approaching unity at room temperature. We project an increase in the photon shot-noise limited…
▽ More
We propose to use an optical cavity to enhance the sensitivity of magnetometers relying on the detection of the spin state of high-density nitrogen-vacancy ensembles in diamond using infrared optical absorption. The role of the cavity is to obtain a contrast in the absorption-detected magnetic resonance approaching unity at room temperature. We project an increase in the photon shot-noise limited sensitivity of two orders of magnitude in comparison with a single-pass approach. Optical losses can limit the enhancement to one order of magnitude which could still enable room temperature operation. Finally, the optical cavity also allows to use smaller pum** power when it is designed to be resonant at both the pump and the signal wavelength.
△ Less
Submitted 4 January, 2013;
originally announced January 2013.
