Transient Analysis during Maximum Power Point Tracking (TrAMPPT) to Assess Dynamic Response of Perovskite Solar Cells
Authors:
Aniela Czudek,
Katrin Hirselandt,
Lukas Kegelmann,
Amran Al-Ashouri,
Marko Jošt,
Weiwei Zuo,
Antonio Abate,
Lars Korte,
Steve Albrecht,
Janardan Dagar,
Eva L. Unger
Abstract:
Determination of the device performance parameters of perovskite solar cells is far from trivial as transient effects may cause large discrepancies in current-voltage measurements as a function of scan rate and pre-conditioning. Maximum power point tracking, MPPT, enables to determine the steady-state maximum power conversion efficiency. However, the MPPT does not provide any information on the de…
▽ More
Determination of the device performance parameters of perovskite solar cells is far from trivial as transient effects may cause large discrepancies in current-voltage measurements as a function of scan rate and pre-conditioning. Maximum power point tracking, MPPT, enables to determine the steady-state maximum power conversion efficiency. However, the MPPT does not provide any information on the device performance parameters, which are reliable only if extracted from current-voltage curves collected under steady-state conditions. We show that is possible to determine the shorter settling or delay time suitable to carry out J-V measurements under steady-state conditions by analysis of the transient device response around the MPP. This procedure proves to be more time-efficient than measurement J-V measurements at a variety of scan rates. Furthermore, the generic algorithm presented here can be implemented to assess changes in the dynamic response of devices during long-term device ageing.
△ Less
Submitted 12 June, 2019;
originally announced June 2019.
The perovskite/transport layer interfaces dominate non-radiative recombination in efficient perovskite solar cells
Authors:
Martin Stolterfoht,
Pietro Caprioglio,
Christian M. Wolff,
José A. Márquez,
Joleik Nordmann,
Shanshan Zhang,
Daniel Rothhardt,
Ulrich Hörmann,
Alex Redinger,
Lukas Kegelmann,
Steve Albrecht,
Thomas Kirchartz,
Michael Saliba,
Thomas Unold,
Dieter Neher
Abstract:
Charge transport layers (CTLs) are key components of diffusion controlled perovskite solar cells, however, they can induce additional non-radiative recombination pathways which limit the open circuit voltage (V_OC) of the cell. In order to realize the full thermodynamic potential of the perovskite absorber, both the electron and hole transport layer (ETL/HTL) need to be as selective as possible. B…
▽ More
Charge transport layers (CTLs) are key components of diffusion controlled perovskite solar cells, however, they can induce additional non-radiative recombination pathways which limit the open circuit voltage (V_OC) of the cell. In order to realize the full thermodynamic potential of the perovskite absorber, both the electron and hole transport layer (ETL/HTL) need to be as selective as possible. By measuring the quasi-Fermi level splitting (QFLS) of perovskite/CTL heterojunctions, we quantify the non-radiative interfacial recombination current for a wide range of commonly used CTLs, including various hole-transporting polymers, spiro-OMeTAD, metal oxides and fullerenes. We find that all studied CTLs limit the V_OC by inducing an additional non-radiative recombination current that is significantly larger than the loss in the neat perovskite and that the least-selective interface sets the upper limit for the V_OC of the device. The results also show that the V_OC equals the internal QFLS in the absorber layer of (pin, nip) cells with selective CTLs and power conversion efficiencies of up to 21.4%. However, in case of less selective CTLs, the V_OC is substantially lower than the QFLS which indicates additional losses at the contacts and/or interfaces. The findings are corroborated by rigorous device simulations which outline several important considerations to maximize the V_OC. This work shows that the real challenge to supress non-radiative recombination losses in perovskite cells on their way to the radiative limit lies in the suppression of carrier recombination at the perovskite/CTL interfaces.
△ Less
Submitted 22 October, 2018; v1 submitted 2 October, 2018;
originally announced October 2018.
