-
Few-electron highly charged muonic Ar atoms verified by electronic $K$ x rays
Authors:
T. Okumura,
T. Azuma,
D. A. Bennett,
W. B. Doriese,
M. S. Durkin,
J. W. Fowler,
J. D. Gard,
T. Hashimoto,
R. Hayakawa,
Y. Ichinohe,
P. Indelicato,
T. Isobe,
S. Kanda,
D. Kato,
M. Katsuragawa,
N. Kawamura,
Y. Kino,
N. Kominato,
Y. Miyake,
K. M. Morgan,
H. Noda,
G. C. O'Neil,
S. Okada,
K. Okutsu,
N. Paul
, et al. (18 additional authors not shown)
Abstract:
Electronic $K$ x rays emitted by muonic Ar atoms in the gas phase were observed using a superconducting transition-edge-sensor microcalorimeter. The high-precision energy spectra provided a clear signature of the presence of muonic atoms accompanied by a few electrons, which have never been observed before. One-, two-, and three-electron bound, i.e., H-like, He-like, and Li-like, muonic Ar atoms w…
▽ More
Electronic $K$ x rays emitted by muonic Ar atoms in the gas phase were observed using a superconducting transition-edge-sensor microcalorimeter. The high-precision energy spectra provided a clear signature of the presence of muonic atoms accompanied by a few electrons, which have never been observed before. One-, two-, and three-electron bound, i.e., H-like, He-like, and Li-like, muonic Ar atoms were identified from electronic $K$ x rays and hyper-satellite $K$ x rays. These $K$ x rays are emitted after the charge transfer process by the collisions with surrounding Ar atoms. With the aid of theoretical calculations, we confirmed that the peak positions are consistent with the x-ray energies from highly charged Cl ions, and the intensities reflecting deexcitation dynamics were successfully understood by taking into account the interaction between the muon and bound electrons.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
2-mm-Thick Large-Area CdTe Double-sided Strip Detectors for High-Resolution Spectroscopic Imaging of X-ray and Gamma-ray with Depth-Of-Interaction Sensing
Authors:
Takahiro Minami,
Miho Katsuragawa,
Shunsaku Nagasawa,
Shin'ichiro Takeda,
Shin Watanabe,
Yutaka Tsuzuki,
Tadayuki Takahashi
Abstract:
We developed a 2-mm-thick CdTe double-sided strip detector (CdTe-DSD) with a 250 um strip pitch, which has high spatial resolution with a uniform large imaging area of 10 cm$^2$ and high energy resolution with high detection efficiency in tens to hundreds keV. The detector can be employed in a wide variety of fields for quantitative observations of hard X-ray and soft gamma-ray with spectroscopic…
▽ More
We developed a 2-mm-thick CdTe double-sided strip detector (CdTe-DSD) with a 250 um strip pitch, which has high spatial resolution with a uniform large imaging area of 10 cm$^2$ and high energy resolution with high detection efficiency in tens to hundreds keV. The detector can be employed in a wide variety of fields for quantitative observations of hard X-ray and soft gamma-ray with spectroscopic imaging, for example, space observation, nuclear medicine, and non-destructive elemental analysis. This detector is thicker than the 0.75-mm-thick one previously developed by a factor of $\sim$2.7, thus providing better detection efficiency for hard X-rays and soft gamma rays. The increased thickness could potentially enhance bias-induced polarization if we do not apply sufficient bias and if we do not operate at a low temperature, but the polarization is not evident in our detector when a high voltage of 500 V is applied to the CdTe diode and the temperature is maintained at -20 $^\circ$C during one-day experiments. The ''Depth Of Interaction'' (DOI) dependence due to the CdTe diode's poor carrier-transport property is also more significant, resulting in much DOI information while complicated detector responses such as charge sharings or low-energy tails that exacerbate the loss in the energy resolution.
In this paper, we developed 2-mm-thick CdTe-DSDs, studied their response, and evaluated their energy resolution, spatial resolution, and uniformity. We also constructed a theoretical model to understand the detector response theoretically, resulting in reconstructing the DOI with an accuracy of 100 um while estimating the carrier-transport property. We realized the detector that has high energy resolution and high 3D spatial resolution with a uniform large imaging area.
△ Less
Submitted 17 December, 2023; v1 submitted 13 December, 2023;
originally announced December 2023.
-
Optimal design for wavelength conversion with a configuration of walk-off compensation in free space in the nanosecond pulsed regime
Authors:
Chiaki Ohae,
Kenji Hasegawa,
Masato Nagano,
Soma Tahara,
Masayuki Katsuragawa
Abstract:
On the basis of standard wavelength conversion by the use of angular phase matching of nonlinear optical crystals arranged in free space, applicable to a wide range of wavelengths and laser intensities, we both numerically and experimentally present an optimal design for achieving near-full energy conversion while maintaining good single-mode properties of fundamental laser radiation in the nanose…
▽ More
On the basis of standard wavelength conversion by the use of angular phase matching of nonlinear optical crystals arranged in free space, applicable to a wide range of wavelengths and laser intensities, we both numerically and experimentally present an optimal design for achieving near-full energy conversion while maintaining good single-mode properties of fundamental laser radiation in the nanosecond regime.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
Generating arbitrary polarization states by manipulating the thicknesses of a pair of uniaxial birefringent plates
Authors:
Akihiro Tomura,
Makoto Nomura,
Chiaki Ohae,
Masayuki Katsuragawa
Abstract:
We report an optical method of generating arbitrary polarization states by manipulating the thicknesses of a pair of uniaxial birefringent plates, the optical axes of which are set at a crossing angle of π/4. The method has the remarkable feature of being able to generate a distribution of arbitrary polarization states in a group of highly discrete spectra without spatially separating the individu…
▽ More
We report an optical method of generating arbitrary polarization states by manipulating the thicknesses of a pair of uniaxial birefringent plates, the optical axes of which are set at a crossing angle of π/4. The method has the remarkable feature of being able to generate a distribution of arbitrary polarization states in a group of highly discrete spectra without spatially separating the individual spectral components. The target polarization-state distribution is obtained as an optimal solution through an exploration. Within a realistic exploration range, a sufficient number of near-optimal solutions are found. This property is also reproduced well by a concise model based on a distribution of exploration points on a Poincaré sphere, showing that the number of near-optimal solutions behaves according to a power law with respect to the number of spectral components of concern. As a typical example of an application, by applying this method to a set of phase-locked highly discrete spectra, we numerically demonstrate the continuous generation of a vector-like optical electric field waveform, the helicity of which is alternated within a single optical cycle in the time domain.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
10 W injection-locked single-frequency continuous-wave titanium:sapphire laser
Authors:
Tetsushi Takano,
Hisashi Ogawa,
Chiaki Ohae,
Masayuki Katsuragawa
Abstract:
High-power tunable lasers with good longitudinal and transverse modes are fundamental tools for exploring quantum physics. Here we report a high-power continuous-wave injection-locked titanium:sapphire laser with a low-loss cavity configuration, where only a laser crystal was installed in the laser cavity. Although the transverse mode was affected by a thermal lens formed in the laser crystal, the…
▽ More
High-power tunable lasers with good longitudinal and transverse modes are fundamental tools for exploring quantum physics. Here we report a high-power continuous-wave injection-locked titanium:sapphire laser with a low-loss cavity configuration, where only a laser crystal was installed in the laser cavity. Although the transverse mode was affected by a thermal lens formed in the laser crystal, the focal length of the thermal lens could be shifted via the temperature of the laser crystal holder or the pump power. As a result, we found a condition that 10 W single-frequency oscillation with a good transverse mode and a slope efficiency of 51% were achieved.
△ Less
Submitted 21 February, 2021;
originally announced February 2021.
-
Imaging and Spectral Performance of a 60 μm Pitch CdTe Double-Sided Strip Detector
Authors:
Kento Furukawa,
Shunsaku Nagasawa,
Lindsay Glesener,
Miho Katsuragawa,
Shin'ichiro Takeda,
Shin Watanabe,
Tadayuki Takahashi
Abstract:
We have evaluated the performance of a fine pitch CdTe Double-sided Strip Detector (CdTe-DSD), which was originally developed for the focal plane detector of a hard X-ray telescope to observe the Sun. The detector has a thickness of 750 um and has 128 strip electrodes with a 60 um strip pitch orthogonally placed on both sides of the detector and covers an energy range 4 keV to 80 keV. The study of…
▽ More
We have evaluated the performance of a fine pitch CdTe Double-sided Strip Detector (CdTe-DSD), which was originally developed for the focal plane detector of a hard X-ray telescope to observe the Sun. The detector has a thickness of 750 um and has 128 strip electrodes with a 60 um strip pitch orthogonally placed on both sides of the detector and covers an energy range 4 keV to 80 keV. The study of the depth of photon interaction and charge sharing effects are of importance in order to provide good spectroscopic and imaging performance. We study the tail structure observed in the spectra caused by charge trap** and develop a new method to reconstruct the spectra based on induced charge information from both anode and cathode strips. By applying this method, energy resolutions (FWHM) of 0.76 keV and 1.0 keV can be obtained at photon energies of 14 keV and 60 keV, respectively, if the energy difference between the anode and cathode is within 1 keV. Furthermore, the tail component at 60 keV is reduced, and the energy resolution of the 60 keV peak is improved from 2.4 keV to 1.5 keV (FWHM) if the energy difference is greater than 1 keV. In order to study the imaging performance, we constructed a simple imaging system using a 5 mm thick tungsten plate that has a pinhole with a diameter of 100 um. We utilize a Ba-133 radioisotope of 1 mm in diameter as a target source in combination with a 100 um slit made from 0.5 mm thickness tungsten. We imaged the Ba-133 source behind the 100 um slit using a 30 keV peak, with a 100 um pinhole placed at the center of the source-detector distance. By applying a charge sharing correction between strips, we have succeeded in obtaining a position resolution better than the strip pitch of 60 um.
△ Less
Submitted 10 June, 2020;
originally announced June 2020.
-
Tailored Raman-resonant four-wave-mixing process
Authors:
C. Ohae,
J. Zheng,
K. Ito,
M. Suzuki,
K. Minoshima,
M. Katsuragawa
Abstract:
Nonlinear optical processes are strongly dominated by phase relationships among electromagnetic fields that are relevant to its optical process. In this paper, we theoretically and experimentally show, as a typical example, that in a Raman-resonant four-wave-mixing process, the first anti-Stokes and Stokes generations can be tailored to a variety of forms by manipulating the phase relationships am…
▽ More
Nonlinear optical processes are strongly dominated by phase relationships among electromagnetic fields that are relevant to its optical process. In this paper, we theoretically and experimentally show, as a typical example, that in a Raman-resonant four-wave-mixing process, the first anti-Stokes and Stokes generations can be tailored to a variety of forms by manipulating the phase relationships among the relevant electromagnetic fields.
△ Less
Submitted 29 November, 2017;
originally announced November 2017.
-
A compact imaging system with a CdTe double-sided strip detector for non-destructive analysis using negative muonic X-rays
Authors:
Miho Katsuragawa,
Motonobu Tampo,
Koji Hamada,
Atsushi Harayama,
Yasuhiro Miyake,
Sayuri Oshita,
Goro Sato,
Tadayuki Takahashi,
Shin'ichiro Takeda,
Shin Watanabe,
Goro Yabu
Abstract:
A CdTe double-sided strip detector (CdTe-DSD) is an ideal device for imaging and spectroscopic measure- ments in the hard X-ray range above 10 keV. Recent development enables us to realize an imager with a detection area of ~10 cm${^2}$. An energy resolution of 1-2 keV (FWHM) and a position resolution of a few hundred μm are available from the detector. This type of imager has been long awaited fo…
▽ More
A CdTe double-sided strip detector (CdTe-DSD) is an ideal device for imaging and spectroscopic measure- ments in the hard X-ray range above 10 keV. Recent development enables us to realize an imager with a detection area of ~10 cm${^2}$. An energy resolution of 1-2 keV (FWHM) and a position resolution of a few hundred μm are available from the detector. This type of imager has been long awaited for non-destructive elemental analysis, especially by using negative muons, because energies of characteristic X-rays from muonic atoms are about 200 time higher than those from normal atoms. With the method that uses negative muons, hard X-ray information gives the spatial distribution of elements in samples at a certain depth defined by the initial momentum of the muon beam. In order to study three-dimensional imaging capability of the method, we have developed a compact imaging system based on CdTe-DSD and a φ3 mm pinhole collimator as the first prototype. We conducted experiments with samples which consist of layers of Al, BN and LiF irradiated by negative muon beams in MUSE/J-PARC and successfully reconstruct hard X-ray images of muonic X-rays from B, N and F at various depths.
△ Less
Submitted 16 November, 2017;
originally announced November 2017.
-
Dual-frequency injection-locked continuous-wave near-infrared laser
Authors:
Trivikramarao Gavara,
Takeru Ohashi,
Yusuke Sasaki,
Takuya Kawashima,
Hiroaki Hamano,
Ryo Yoshizaki,
Yuki Fujimura,
Kazumichi Yoshii,
Chiaki Ohae,
Masayuki Katsuragawa
Abstract:
We report a dual-frequency injection-locked continuous-wave near-infrared laser. The entire system consists of a Ti:sapphire ring laser as a power oscillator, two independent diode-lasers employed as seed lasers, and a master cavity providing a frequency reference. Stable dual-frequency injection-locked oscillation is achieved with a maximum output power of 2.8 W. As fundamental performance featur…
▽ More
We report a dual-frequency injection-locked continuous-wave near-infrared laser. The entire system consists of a Ti:sapphire ring laser as a power oscillator, two independent diode-lasers employed as seed lasers, and a master cavity providing a frequency reference. Stable dual-frequency injection-locked oscillation is achieved with a maximum output power of 2.8 W. As fundamental performance features of this laser system, we show its single longitudinal/transverse mode characteristics and practical power stability. Furthermore, as advanced features, we demonstrate arbitrary selectivity of the two frequencies and flexible control of their relative powers by simply manipulating the seed lasers.
△ Less
Submitted 7 April, 2016;
originally announced April 2016.
-
Generation of five phase-locked harmonics by implementing a divide-by-three optical frequency divider
Authors:
Nurul Sheeda Suhaimi,
Chiaki Ohae,
Trivikramarao Gavara,
Ken'ichi Nakagawa,
Feng Lei Hong,
Masayuki Katsuragawa
Abstract:
We report the generation of five phase-locked harmonics, f_1: 2403 nm, f_2: 1201 nm, f_3: 801 nm, f_4: 600 nm, and f_5: 480 nm with an exact frequency ratio of 1 : 2 : 3 : 4 : 5 by implementing a divide-by-three optical-frequency divider in the high harmonic generation process. All five harmonics are generated coaxially with high phase coherence in time and space, which are applicable for various…
▽ More
We report the generation of five phase-locked harmonics, f_1: 2403 nm, f_2: 1201 nm, f_3: 801 nm, f_4: 600 nm, and f_5: 480 nm with an exact frequency ratio of 1 : 2 : 3 : 4 : 5 by implementing a divide-by-three optical-frequency divider in the high harmonic generation process. All five harmonics are generated coaxially with high phase coherence in time and space, which are applicable for various practical uses.
△ Less
Submitted 3 November, 2015;
originally announced November 2015.
-
Arbitrary manipulation of nonlinear optical processes
Authors:
Jian Zheng,
Masayuki Katsuragawa
Abstract:
Nonlinear optical processes are governed by the relative-phase relationships among the relevant electromagnetic fields in these processes. In this Letter, we describe the physics of arbitrary manipulation of nonlinear optical processes (AMNOP) by artificial control of relative phases. As a typical example, we show freely designable optical-frequency conversions to extreme spectral regions, mid-inf…
▽ More
Nonlinear optical processes are governed by the relative-phase relationships among the relevant electromagnetic fields in these processes. In this Letter, we describe the physics of arbitrary manipulation of nonlinear optical processes (AMNOP) by artificial control of relative phases. As a typical example, we show freely designable optical-frequency conversions to extreme spectral regions, mid-infrared and vacuum-ultraviolet, with near-unity quantum efficiencies. Furthermore, we show that such optical-frequency conversions can be realized by using a surprisingly simple technology where transparent plates are placed in a nonlinear optical medium and their positions and thicknesses are adjusted precisely. In a numerical experiment assuming practically applicable parameters in detail, we demonstrate a single-frequency tunable laser that covers the whole vacuum-ultraviolet spectral range of 120 to 200 nm.
△ Less
Submitted 16 June, 2014;
originally announced June 2014.
-
Observation of coherent two-photon emission from the first vibrationally-excited state of hydrogen molecules
Authors:
Yuki Miyamoto,
Hideaki Hara,
Susumu Kuma,
Takahiko Masuda,
Masayuki Katsuragawa,
Itsuo Nakano,
Chiaki Ohae,
Noboru Sasao,
Minoru Tanaka,
Satoshi Uetake,
Akihiro Yoshimi,
Koji Yoshimura,
Motohiko Yoshimura
Abstract:
In this paper, we describe an experiment which was conducted to explore the macro-coherent amplification mechanism using a two-photon emission process from the first vibrationally-excited state of para-hydrogen molecule. Large coherence in the initial state was prepared by the adiabatic Raman population transfer method, and the lowest Stokes sideband was used as a trigger field. We observed the co…
▽ More
In this paper, we describe an experiment which was conducted to explore the macro-coherent amplification mechanism using a two-photon emission process from the first vibrationally-excited state of para-hydrogen molecule. Large coherence in the initial state was prepared by the adiabatic Raman population transfer method, and the lowest Stokes sideband was used as a trigger field. We observed the coherent two-photon emission consistent with the expectation of the paired super-radiance master equation.
△ Less
Submitted 27 August, 2014; v1 submitted 9 June, 2014;
originally announced June 2014.
-
Frequency comb generation at THz frequencies by coherent phonon excitation in Si
Authors:
Muneaki Hase,
Masayuki Katsuragawa,
Anca Monia Constantinescu,
Hrvoje Petek
Abstract:
High-order nonlinear light-matter interactions in gases enable generation of x-ray and attosecond light pulses, metrology, and spectroscopy. Optical nonlinearities in solid-state materials are particularly interesting for combining optical and electronic functions for high-bandwidth information processing. Third-order nonlinear optical processes in silicon have been used to process optical signals…
▽ More
High-order nonlinear light-matter interactions in gases enable generation of x-ray and attosecond light pulses, metrology, and spectroscopy. Optical nonlinearities in solid-state materials are particularly interesting for combining optical and electronic functions for high-bandwidth information processing. Third-order nonlinear optical processes in silicon have been used to process optical signals with greater than 1 GHz bandwidths. Fundamental physical processes for a Si-based optical modulator in the THz bandwidth range, however, have not yet been explored. Here we demonstrate ultrafast phononic modulation of the optical index of Si by irradiation with intense few-cycle femtosecond pulses. The anisotropic reflectivity modulation by the resonant Raman susceptibility at the fundamental frequency of the longitudinal optical (LO) phonon of Si (15.6 THz) generates a frequency comb up to 7th-order. All optical >100 THz frequency comb generation is realized by harnessing the coherent atomic motion of the Si crystalline lattice at its highest mechanical frequency.
△ Less
Submitted 2 October, 2015; v1 submitted 5 November, 2012;
originally announced November 2012.
-
The simplest rout to generating a train of attosecond pulses
Authors:
Kazumichi Yoshii,
John Kiran Anthony,
Masayuki Katsuragawa
Abstract:
We report on new routes to generating a train of attosecond pulses. The methods are extremely simple and robust; we need to place only a few thin dispersive materials in the optical path. We numerically demonstrate the generation of a train of attosecond pulses with a transform-limited pulse duration of 728 as and a repetition period of 8.03 fs in gaseous parahydrogen.
We report on new routes to generating a train of attosecond pulses. The methods are extremely simple and robust; we need to place only a few thin dispersive materials in the optical path. We numerically demonstrate the generation of a train of attosecond pulses with a transform-limited pulse duration of 728 as and a repetition period of 8.03 fs in gaseous parahydrogen.
△ Less
Submitted 29 July, 2012;
originally announced July 2012.
-
10 THz Ultrafast Function Generator - generation of rectangular and triangular pulse trains-
Authors:
Kanaka Raju Pandiri,
Masayuki Katsuragawa
Abstract:
We report the synthesis of arbitrary optical waveforms by manipulating the spectral phases of Raman sidebands with a wide frequency spacing line-by-line. Trains of rectangular and triangular pulses are stably produced at an ultrahigh repetition rate of 10.6229 THz, reminiscent of an ultrafast function generator.
We report the synthesis of arbitrary optical waveforms by manipulating the spectral phases of Raman sidebands with a wide frequency spacing line-by-line. Trains of rectangular and triangular pulses are stably produced at an ultrahigh repetition rate of 10.6229 THz, reminiscent of an ultrafast function generator.
△ Less
Submitted 31 August, 2010;
originally announced August 2010.
-
Line-by-line control of 10-THz-frequency-spacing Raman sidebands
Authors:
Kanaka Raju Pandiri,
Takayuki Suzuki,
Akira Suda,
Katsumi Midorikawa,
Masayuki Katsuragawa
Abstract:
We report line-by-line control of a coherent discrete spectrum (Raman sidebands) with a frequency spacing of 10.6 THz that is produced by an adiabatic Raman process. We show that the spectral phase of the Raman sidebands is finely controlled to the target (flat relative-spectral-phase). This is achieved by employing a combination of a spatial phase controller and a spectral interferometer, which…
▽ More
We report line-by-line control of a coherent discrete spectrum (Raman sidebands) with a frequency spacing of 10.6 THz that is produced by an adiabatic Raman process. We show that the spectral phase of the Raman sidebands is finely controlled to the target (flat relative-spectral-phase). This is achieved by employing a combination of a spatial phase controller and a spectral interferometer, which are specifically designed for a high-power discrete spectrum. We also show that such spectral-phase control produces a train of Fourier transform limited pulses with an ultrahigh repetition rate of 10.6 THz in the time domain.
△ Less
Submitted 20 January, 2010;
originally announced January 2010.
-
A Raman-type optical frequency comb adiabatically generated in an enhancement cavity
Authors:
M. Katsuragawa,
R. Tanaka,
H. Yokota,
T. Matsuzawa
Abstract:
We demonstrate efficient generation of a Raman-type optical frequency comb by employing adiabatic Raman excitation in an enhancement cavity. A broad frequency comb spanning over 130 THz is realized with an excitation power reduction exceeding three orders of magnitude compared with a single-pass configuration.
We demonstrate efficient generation of a Raman-type optical frequency comb by employing adiabatic Raman excitation in an enhancement cavity. A broad frequency comb spanning over 130 THz is realized with an excitation power reduction exceeding three orders of magnitude compared with a single-pass configuration.
△ Less
Submitted 1 January, 2010;
originally announced January 2010.