Showing 1–32 of 32 results for author: Kashikhin, V

Accelerator Magnet Development Based on COMB Technology with STAR Wires

Authors: V. V. Kashikhin, S. Cohan, V. Lombardo, D. Turrioni, N. Mai, A. K. Chavda, U. Sambangi, S. Korupolu, J. Peram, A. Anil, C. Goel, J. Sai Sandra, V. Yerraguravagari, R. Schmidt, V. Selvamanickam, G. Majkic, E. Galstyan, K. Selvamanickam

Abstract: This paper reports progress in the development of COMB magnet technology with STAR wires. A two-layer dipole magnet with 60 mm clear bore has been recently fabricated and tested in liquid nitrogen. The purpose of the test was to determine what kind of critical current degradation occurs in the process of winding the STAR wire into the COMB structure. This paper reports progress in the development of COMB magnet technology with STAR wires. A two-layer dipole magnet with 60 mm clear bore has been recently fabricated and tested in liquid nitrogen. The purpose of the test was to determine what kind of critical current degradation occurs in the process of winding the STAR wire into the COMB structure. △ Less

Submitted 7 August, 2023; v1 submitted 24 July, 2023; originally announced July 2023.

Comments: CEC/ICMC23

Report number: FERMILAB-CONF-23-361-TD

Design Status of BCC Cryomodule for LCLS-II HE

Authors: C. Narug, T. Arkan, S. Cheban, M. Chen, B. Hartsell, J. Kaluzny, Y. Orlov, V. Kashikhin

Abstract: A Buncher or Capture Cavity (BCC) Cryomodule is currently in development at Fermilab for use in a second injector for LCLS-II-HE. The BCC Cryomodule is designed to contain one 1.3 GHz cavity and one solenoid magnet as part of a 100MeV low emittance injector. The design considerations for the Cryomodule are similar to the LCLS-II cryomodule with additional requirements to account for additional vac… ▽ More A Buncher or Capture Cavity (BCC) Cryomodule is currently in development at Fermilab for use in a second injector for LCLS-II-HE. The BCC Cryomodule is designed to contain one 1.3 GHz cavity and one solenoid magnet as part of a 100MeV low emittance injector. The design considerations for the Cryomodule are similar to the LCLS-II cryomodule with additional requirements to account for additional vacuum loading at the end of this vessel due to the termination of the insulating vacuum. To accomplish this design, the cryomodule is being developed using the experience gained during the development of the LCLS-II cryomodule. The design, analysis, and status of the Cryomodule will be discussed. △ Less

Submitted 11 July, 2023; originally announced July 2023.

Comments: 21st International Conference on Radio-Frequency Superconductivity (SRF 2023)

Report number: FERMILAB-CONF-23-310-TD

Status of the High Field Cable Test Facility at Fermilab

Authors: G. V. Velev, D. Arbelaez, C. Arcola, R. Bruce, V. Kashikhin, S. Koshelev, A. Makulski, V. Marinozzi, V. Nikolic, D. Orris, S. Prestemon, G. Sabbi, T. Tope, X. Yuan

Abstract: Fermi National Accelerator Laboratory (FNAL) and Lawrence Berkeley National Laboratory (LBNL) are building a new High Field Vertical Magnet Test Facility (HFVMTF) for testing superconducting cables in high magnetic field. The background magnetic field of 15 T in the HFVMTF will be produced by a magnet provided by LBNL. The HFVMTF is jointly funded by the US DOE Offices of Science, High Energy Phys… ▽ More Fermi National Accelerator Laboratory (FNAL) and Lawrence Berkeley National Laboratory (LBNL) are building a new High Field Vertical Magnet Test Facility (HFVMTF) for testing superconducting cables in high magnetic field. The background magnetic field of 15 T in the HFVMTF will be produced by a magnet provided by LBNL. The HFVMTF is jointly funded by the US DOE Offices of Science, High Energy Physics (HEP), and Fusion Energy Sciences (FES), and will serve as a superconducting cable test facility in high magnetic fields and a wide range of temperatures for HEP and FES communities. This facility will also be used to test high-field superconducting magnet models and demonstrators, including hybrid magnets, produced by the US Magnet Development Program (MDP). The paper describes the status of the facility, including construction, cryostat designs, top and lambda plates, and systems for powering, and quench protection and monitoring. △ Less

Submitted 16 February, 2023; originally announced February 2023.

Report number: FERMILAB-CONF-23-041-TD

Conceptual design of 20 T hybrid accelerator dipole magnets

Authors: P. Ferracin, G. Ambrosio, M. Anerella, D. Arbelaez, L. Brouwer, E. Barzi, L. Cooley, J. Cozzolino, L. Garcia Fajardo, R. Gupta, M. Juchno, V. V. Kashikhin, F. Kurian, V. Marinozzi, I. Novitski, E. Rochepault, J. Stern, G. Vallone, B. Yahia, A. V. Zlobin

Abstract: Hybrid magnets are currently under consideration as an economically viable option towards 20 T dipole magnets for next generation of particle accelerators. In these magnets, High Temperature Superconducting (HTS) materials are used in the high field part of the coil with so-called insert coils, and Low Temperature Superconductors (LTS) like Nb3Sn and Nb-Ti superconductors are used in the lower fie… ▽ More Hybrid magnets are currently under consideration as an economically viable option towards 20 T dipole magnets for next generation of particle accelerators. In these magnets, High Temperature Superconducting (HTS) materials are used in the high field part of the coil with so-called insert coils, and Low Temperature Superconductors (LTS) like Nb3Sn and Nb-Ti superconductors are used in the lower field region with so-called outsert coils. The attractiveness of the hybrid option lays on the fact that, on the one hand, the 20 T field level is beyond the Nb3Sn practical limits of 15-16 T for accelerator magnets and can be achieved only via HTS materials; on the other hand, the high cost of HTS superconductors compared to LTS superconductors makes it advantageous exploring a hybrid approach, where the HTS portion of the coil is minimized. We present in this paper an overview of different design options aimed at generating 20 T field in a 50 mm clear aperture. The coil layouts investigated include the Cos-theta design (CT), with its variations to reduce the conductor peak stress, namely the Canted Cos-theta design (CCT) and the Stress Management Cos-theta design (SMCT), and, in addition, the Block-type design (BL) including a form of stress management and the Common-Coil design (CC). Results from a magnetic and mechanical analysis are discussed, with particular focus on the comparison between the different options regarding quantity of superconducting material, field quality, conductor peak stress, and quench protection. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Report number: FERMILAB-PUB-22-856-TD

HTS Dipole Magnet with a Mechanical Energy Transfer in the Magnetic Field

Authors: Vladimir Kashikhin, Daniele Turrioni

Abstract: There were designed and successfully tested at Fermilab several high temperature superconducting (HTS) model magnets for particle accelerators. Some of them worked in a persistent current mode continuously generating magnetic field in the iron dominated magnet gap. In the paper was investigated a novel HT dipole magnet concept with a mechanical energy transfer in the magnetic field. To pump the en… ▽ More There were designed and successfully tested at Fermilab several high temperature superconducting (HTS) model magnets for particle accelerators. Some of them worked in a persistent current mode continuously generating magnetic field in the iron dominated magnet gap. In the paper was investigated a novel HT dipole magnet concept with a mechanical energy transfer in the magnetic field. To pump the energy in the superconducting HTS dipole magnet used a detachable magnetizer. The HTS dipole magnet was build and successfully tested at a liquid nitrogen temperature. Discussed the magnet design, test results, the proposed approach limits, and efficiency. △ Less

Submitted 31 October, 2022; originally announced November 2022.

Report number: FERMILAB-CONF-22-647-TD

Superconducting Magnet System Concept with a Mechanical Energy Transfer in the Magnetic Field

Authors: Vladimir Kashikhin

Abstract: There is an interest to design superconducting magnet systems working in a persistent current mode. These systems continuously generate magnetic field with disconnected power source working like permanent magnet devices. In this paper proposed a magnet system concept based on the direct mechanical energy transfer in the magnetic field. Short circuited superconducting coils do not have current lead… ▽ More There is an interest to design superconducting magnet systems working in a persistent current mode. These systems continuously generate magnetic field with disconnected power source working like permanent magnet devices. In this paper proposed a magnet system concept based on the direct mechanical energy transfer in the magnetic field. Short circuited superconducting coils do not have current leads and power source. To pump the mechanical energy in the superconducting coil used a magnetizer which magnetically coupled with the coil. The mechanical removing the magnetizer from the magnet induces a persistent current in the superconducting coil which generates the magnetic field. Iron dominated magnet system concept was investigated using OPERA3d code which confirmed a visibility of proposed approach. △ Less

Submitted 31 October, 2022; originally announced November 2022.

Report number: FERMILAB-CONF-22-646-TD

Towards 20 T Hybrid Accelerator Dipole Magnets

Authors: P. Ferracin, G. Ambrosio, D. Arbelaez, L. Brouwer, E. Barzi, L. Cooley, L. Garcia Fajardo, R. Gupta, M. Juchno, V. Kashikhin, V. Marinozzi, I. Novitski, E. Rochepault, J. Stern, A. Zlobin, N. Zucchi

Abstract: The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets using Nb-Ti superconductor the practical field limit is considered to be 8-9 T. When Nb3Sn superconductor material is utilized, a field level of 15-16 T can be achieved. To further push the magnetic field beyond the Nb3Sn… ▽ More The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets using Nb-Ti superconductor the practical field limit is considered to be 8-9 T. When Nb3Sn superconductor material is utilized, a field level of 15-16 T can be achieved. To further push the magnetic field beyond the Nb3Sn limits, High Temperature Superconductors (HTS) need to be considered in the magnet design. The most promising HTS materials for particle accelerator magnets are Bi2212 and REBCO. However, their outstanding performance comes with a significantly higher cost. Therefore, an economically viable option towards 20 T dipole magnets could consist in an hybrid solution, where both HTS and Nb3Sn materials are used. We discuss in this paper preliminary conceptual designs of various 20 T hybrid magnet concepts. After the definition of the overall design criteria, the coil dimensions and parameters are investigated with finite element models based on simple sector coils. Preliminary 2D cross-section computation results are then presented and three main layouts compared: cos-theta, block, and common-coil. Both traditional designs and more advanced stress-management options are considered. △ Less

Submitted 30 August, 2022; originally announced August 2022.

Comments: arXiv admin note: substantial text overlap with arXiv:2203.13985

Report number: FERMILAB-PUB-22-221-TD

A Strategic Approach to Advance Magnet Technology for Next Generation Colliders

Authors: G. Ambrosio, K. Amm, M. Anerella, G. Apollinari, D. Arbelaez, B. Auchmann, S. Balachandran, M. Baldini, A. Ballarino, S. Barua, E. Barzi, A. Baskys, C. Bird, J. Boerme, E. Bosque, L. Brouwer, S. Caspi, N. Cheggour, G. Chlachidze, L. Cooley, D. Davis, D. Dietderich, J. DiMarco, L. English, L. Garcia Fajardo , et al. (52 additional authors not shown)

Abstract: Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the domi… ▽ More Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility. △ Less

Submitted 26 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Critical problems of energy frontier Muon Colliders: optics, magnets and radiation

Authors: Yu. I. Alexahin, E. Barzi, E. Gianfelice-Wendt, V. Kapin, V. V. Kashikhin, N. V. Mokhov, I. Novitski, V. Shiltsev, S. Striganov, I. Tropin, A. V. Zlobin

Abstract: This White Paper brings together our previous studies on a Muon Collider (MC) and presents a design concept of the 6 TeV MC optics, the superconducting (SC) magnets, and a preliminary analysis of the protection system to reduce magnet radiation loads as well as particle backgrounds in the detector. The SC magnets and detector protection considerations impose strict limitations on the lattice choic… ▽ More This White Paper brings together our previous studies on a Muon Collider (MC) and presents a design concept of the 6 TeV MC optics, the superconducting (SC) magnets, and a preliminary analysis of the protection system to reduce magnet radiation loads as well as particle backgrounds in the detector. The SC magnets and detector protection considerations impose strict limitations on the lattice choice, hence the design of the collider optics, magnets and Machine Detector Interface (MDI) are closely intertwined. As a first approximation we use the Interaction Region (IR) design with beta-star=3 mm, whereas for the arcs we re-scale the arc cell design of the 3 TeV MC. Traditional cos-theta coil geometry and Nb3Sn superconductor were used to provide field maps for the analysis and optimization of the arc lattice and IR design, as well as for studies of beam dynamics and magnet protection against radiation. The stress management in the coil will be needed to avoid large degradation or even damage of the brittle SC coils. In the assumed IR designs, the dipoles close to the Interaction Point (IP) and tungsten masks in each IR (to protect magnets) help reducing background particle fluxes in the detector by a substantial factor. The tungsten nozzles in the 6 to 600 cm region from the IP, assisted by the detector solenoid field, trap most of the decay electrons created close to the IP as well as most of the incoherent electron-positron pairs generated in the IP. With sophisticated tungsten, iron, concrete and borated polyethylene shielding in the MDI region, the total reduction of background loads by more than three orders of magnitude can be achieved. △ Less

Submitted 19 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021. arXiv admin note: text overlap with arXiv:1204.6721

Solving Critical Problems of the Muon Collider Higgs Factory: Optics, Magnets and their Protection, Detector Backgrounds

Authors: Yu. Alexahin, E. Gianfelice-Wendt, V. Kapin, V. V. Kashikhin, N. V. Mokhov, S. I. Striganov, I. S. Tropin, A. V. Zlobin

Abstract: A low-energy medium-luminosity Muon Collider (MC) is being studied as a possible Higgs Factory (HF). Electrons from muon decays will deposit more than 300 kW in superconducting magnets of the HF collider ring. This imposes significant challenges to superconducting (SC) magnets used in the MC storage ring (SR) and interaction regions (IR). Magnet designs are proposed which provide high operating gr… ▽ More A low-energy medium-luminosity Muon Collider (MC) is being studied as a possible Higgs Factory (HF). Electrons from muon decays will deposit more than 300 kW in superconducting magnets of the HF collider ring. This imposes significant challenges to superconducting (SC) magnets used in the MC storage ring (SR) and interaction regions (IR). Magnet designs are proposed which provide high operating gradient and magnetic field in a large aperture to accommodate the large size of muon beams (due to low beta*), as well as a cooling system to intercept the large heat deposition from the showers induced by decay electrons. The distribution of heat deposition in the MC SR lattice elements requires large-aperture magnets in order to accommodate thick high-Z absorbers to protect the SC coils. Based on the developed MARS15 model and intensive simulations, a sophisticated radiation protection system was designed for the collider SR and IR to bring the peak power density in the superconducting coils below the quench limit and reduce the dynamic heat deposition in the cold mass by a factor of 100. The system consists of tight tungsten masks in the magnet interconnect regions and elliptical tungsten liners in the magnet aperture optimized individually for each magnet. These also reduce the background particle fluxes in the collider detector. △ Less

Submitted 16 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021. arXiv admin note: substantial text overlap with arXiv:1806.08883, arXiv:1501.07624

REBCO -- a silver bullet for our next high-field magnet and collider budget?

Authors: Xiaorong Wang, Anis Ben Yahia, Ernesto Bosque, Paolo Ferracin, Stephen Gourlay, Ramesh Gupta, Hugh Higley, Vadim Kashikhin, Mithlesh Kumar, Vito Lombardo, Maxim Marchevsky, Reed Teyber, Sofia Viarengo

Abstract: High-field superconducting magnets with a dipole field of 16 T and above enable future energy-frontier circular particle colliders. Although we believe these magnets can be built, none exists today. They can also be a showstopper for future high-energy machines due to a prohibitively high price tag based on the current conductor and magnet fabrication cost. The high-temperature superconducting REB… ▽ More High-field superconducting magnets with a dipole field of 16 T and above enable future energy-frontier circular particle colliders. Although we believe these magnets can be built, none exists today. They can also be a showstopper for future high-energy machines due to a prohibitively high price tag based on the current conductor and magnet fabrication cost. The high-temperature superconducting REBCO coated conductor can address both the technical and cost issues, a silver bullet to lay both monsters to rest. The challenges and unknowns, however, can be too arduous to make the silver bullet. We lay out a potential road forward and suggest key action items. As a contribution from the accelerator community, we attempt to clarify for our theorist and experimenter colleagues a few aspects about the future high-field superconducting magnets. We hope to stimulate an effective plan for the 2023 P5 process that can lead to a cost-effective high-field magnet technology for future colliders and the exciting physics they can steward. △ Less

Submitted 21 March, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021. Additional typos corrected; references updated with hyperlinks

White Paper on Leading-Edge technology And Feasibility-directed (LEAF) Program aimed at readiness demonstration for Energy Frontier Circular Colliders by the next decade

Authors: G. Ambrosio, G. Apollinari, M. Baldini, R. Carcagno, C. Boffo, B. Claypool, S. Feher, S. Hays, D. Hoang, V. Kashikhin, V. V. Kashikhin, S. Krave, M. Kufer, J. Lee, V. Lombardo, V. Marinozzi, F. Nobrega, X. Peng, H. Piekarz, V. Shiltsev, S. Stoynev, T. Strauss, N. Tran, G. Velev, X. Xu , et al. (17 additional authors not shown)

Abstract: In this White Paper for the Snowmass 2021 Process, we propose the establishment of a magnet Leading-Edge technology And Feasibility-directed Program (LEAF Program) to achieve readiness for a future collider decision on the timescale of the next decade. The LEAF Program would rely on, and be synergetic with, generic R&D efforts presently covered - in the US - by the Magnet Development Program (MD… ▽ More In this White Paper for the Snowmass 2021 Process, we propose the establishment of a magnet Leading-Edge technology And Feasibility-directed Program (LEAF Program) to achieve readiness for a future collider decision on the timescale of the next decade. The LEAF Program would rely on, and be synergetic with, generic R&D efforts presently covered - in the US - by the Magnet Development Program (MDP), the Conductor Procurement and R&D (CPRD) Program and other activities in the Office of HEP supported by Early Career Awards (ECA) or Lab Directed R&D (LDRD) funds. Where possible, ties to synergetic efforts in other Offices of DOE or NSF are highlighted and suggested as wider Collaborative efforts on the National scale. International efforts are also mentioned as potential partners in the LEAF Program. We envision the LEAF Program to concentrate on demonstrating the feasibility of magnets for muon colliders as well as next generation high energy hadron colliders, pursuing, where necessary and warranted by the nature of the application, the transition from R&D models to long models/prototypes. The LEAF Program will naturally drive accelerator-quality and experiment-interface design considerations. LEAF will also concentrate, where necessary, on cost reduction and/or industrialization steps. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021, 19 pages, 5 figures. Corresponding Author: G. Apollinari [email protected]

MDPCT1 quench data and performance analysis

Authors: Stoyan Emilov Stoynev, Maria Baldini, Emanuela Z. Barzi, Gouram Chlachidze, Vadim V. Kashikhin, Steven T. Krave, Igor Novitski, Daniele Turrioni, Alexander V. Zlobin

Abstract: MDPCT1 is a four-layer cos-theta Nb3Sn dipole demonstrator developed and tested at FNAL in the framework of the U.S. Magnet Development Program. The magnet reached record fields for accelerator magnets of 14.1 T at 4.5 K in the first test and 14.5 T at 1.9 K in the second test and then showed large degradation. While its inner coils performed exceptionally well with only two quenches up to 14.5 T… ▽ More MDPCT1 is a four-layer cos-theta Nb3Sn dipole demonstrator developed and tested at FNAL in the framework of the U.S. Magnet Development Program. The magnet reached record fields for accelerator magnets of 14.1 T at 4.5 K in the first test and 14.5 T at 1.9 K in the second test and then showed large degradation. While its inner coils performed exceptionally well with only two quenches up to 14.5 T and no evidence of degradation, the outer coils degraded over the course of testing. By adopting new measurement and analysis techniques at FNAL we are discussing in detail what happened. Both success and failure in our diagnostics are discussed. The evolution of techniques over the course of two tests (and three thermal cycles) shows the path to address challenges brought by the first four-layer magnet tested at FNAL. This paper presents the analysis of quench data along with diagnostic features and complementary measurements taken in support of the magnet performance analysis. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Report number: FERMILAB-CONF-21-638-TD

The Higgs Factory Muon Collider Superconducting Magnets and Their Protection Against Beam Decay Radiation

Authors: N. V. Mokhov, V. V. Kashikhin, S. I. Striganov, I. S. Tropin, A. V. Zlobin

Abstract: Low-energy medium-luminosity Muon Collider (MC) is being studied as a possible Higgs Factory (HF). Electrons from muon decays will deposit more than 300 kW in superconducting magnets of the HF collider ring. This imposes significant challenges to superconducting (SC) magnets used in the MC storage ring (SR) and interaction regions (IR). The magnet designs are proposed which provide high operating… ▽ More Low-energy medium-luminosity Muon Collider (MC) is being studied as a possible Higgs Factory (HF). Electrons from muon decays will deposit more than 300 kW in superconducting magnets of the HF collider ring. This imposes significant challenges to superconducting (SC) magnets used in the MC storage ring (SR) and interaction regions (IR). The magnet designs are proposed which provide high operating gradient and magnetic field in a large aperture to accommodate the large size of muon beams due to low \b{eta}* as well as the cooling system to intercept the large heat deposition from the showers induced by decay electrons. Specific distribution of heat deposition in the lattice elements MC SR requires large aperture magnets to accommodate thick high-Z absorbers to protect the SC coils. Based on the developed MARS15 model and intense simulations, a sophisticated radiation protection system was designed for the collider SR and IR to bring the peak power density in the superconducting coils below the quench limit and reduce the dynamic heat deposition in the cold mass by a factor of 100. The system consists of tight tungsten masks in the magnet interconnect regions and elliptical tungsten liners in magnet aperture optimized for each magnet. It also reduces the background particle fluxes in the collider detector. △ Less

Submitted 19 July, 2018; v1 submitted 22 June, 2018; originally announced June 2018.

Comments: 14 pages, 12 figures

Report number: Fermilab-PUB-18-300-APC-TD

Mitigating Radiation Impact on Superconducting Magnets of the Higgs Factory Muon Collider

Authors: Nikolai Mokhov, Yuri I. Alexahin, Vadim V. Kashikhin, Sergei I. Striganov, Igor S. Tropin, Alexander V. Zlobin

Abstract: Recent discovery of a Higgs boson boosted interest in a low-energy medium-luminosity Muon Collider as a Higgs Factory (HF). A preliminary design of the HF storage ring (SR) is based on cos-theta Nb3Sn superconducting (SC) magnets with the coil inner diameter ranging from 50 cm in the interaction region to 16 cm in the arc. The coil cross-sections were chosen based on the operation margin, field qu… ▽ More Recent discovery of a Higgs boson boosted interest in a low-energy medium-luminosity Muon Collider as a Higgs Factory (HF). A preliminary design of the HF storage ring (SR) is based on cos-theta Nb3Sn superconducting (SC) magnets with the coil inner diameter ranging from 50 cm in the interaction region to 16 cm in the arc. The coil cross-sections were chosen based on the operation margin, field quality and quench protection considerations to provide an adequate space for the beam pipe, helium channel and inner absorber (liner). With the 62.5-GeV muon energy and 2 x 10^12 muons per bunch, the electrons from muon decays deposit about 300 kW in the SC magnets, or unprecedented 1 kW/m dynamic heat load, which corresponds to a multi-MW room temperature equivalent. Based on the detailed MARS15 model built and intense simulations, a sophisticated protection system was designed for the entire SR to bring the peak power density in the SC coils safely below the quench limit and reduce the dynamic heat load to the cold mass by a factor of 100. The system consists of tight tungsten masks in the magnet interconnect regions and elliptical tungsten liners optimized for each magnet. △ Less

Submitted 29 January, 2015; originally announced January 2015.

Comments: 4 pp. Presented paper at the 5th International Particle Accelerator Conference, June 15-20, 2014, Dresden, Germany

Report number: Fermilab-Conf-14-175-APC

Muon (g-2) Technical Design Report

Authors: J. Grange, V. Guarino, P. Winter, K. Wood, H. Zhao, R. M. Carey, D. Gastler, E. Hazen, N. Kinnaird, J. P. Miller, J. Mott, B. L. Roberts, J. Benante, J. Crnkovic, W. M. Morse, H. Sayed, V. Tishchenko, V. P. Druzhinin, B. I. Khazin, I. A. Koop, I. Logashenko, Y. M. Shatunov, E. Solodov, M. Korostelev, D. Newton , et al. (176 additional authors not shown)

Abstract: The Muon (g-2) Experiment, E989 at Fermilab, will measure the muon anomalous magnetic moment a factor-of-four more precisely than was done in E821 at the Brookhaven National Laboratory AGS. The E821 result appears to be greater than the Standard-Model prediction by more than three standard deviations. When combined with expected improvement in the Standard-Model hadronic contributions, E989 should… ▽ More The Muon (g-2) Experiment, E989 at Fermilab, will measure the muon anomalous magnetic moment a factor-of-four more precisely than was done in E821 at the Brookhaven National Laboratory AGS. The E821 result appears to be greater than the Standard-Model prediction by more than three standard deviations. When combined with expected improvement in the Standard-Model hadronic contributions, E989 should be able to determine definitively whether or not the E821 result is evidence for physics beyond the Standard Model. After a review of the physics motivation and the basic technique, which will use the muon storage ring built at BNL and now relocated to Fermilab, the design of the new experiment is presented. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2/3 approval. △ Less

Submitted 11 May, 2018; v1 submitted 27 January, 2015; originally announced January 2015.

Comments: 666 pages

Report number: FERMILAB-FN-0992-E

Mu2e Technical Design Report

Authors: L. Bartoszek, E. Barnes, J. P. Miller, J. Mott, A. Palladino, J. Quirk, B. L. Roberts, J. Crnkovic, V. Polychronakos, V. Tishchenko, P. Yamin, C. -h. Cheng, B. Echenard, K. Flood, D. G. Hitlin, J. H. Kim, T. S. Miyashita, F. C. Porter, M. Röhrken, J. Trevor, R. -Y. Zhu, E. Heckmaier, T. I. Kang, G. Lim, W. Molzon , et al. (238 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the L… ▽ More The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval. △ Less

Submitted 16 March, 2015; v1 submitted 21 January, 2015; originally announced January 2015.

Comments: compressed file, 888 pages, 621 figures, 126 tables; full resolution available at http://mu2e.fnal.gov; corrected typo in background summary, Table 3.4

Report number: Fermilab-TM-2594 , Fermilab-DESIGN-2014-1

Perpendicularly Biased YIG Tuners for the Fermilab Recycler 52.809 MHz Cavities

Authors: R. Madrak, V. Kashikhin, A. Makarov, D. Wildman

Abstract: For NOvA and future experiments requiring high intensity proton beams, Fermilab is in the process of upgrading the existing accelerator complex for increased proton production. One such improvement is to reduce the Main Injector cycle time, by performing slip stacking, previously done in the Main Injector, in the now repurposed Recycler Ring. Recycler slip stacking requires new tuneable RF cavitie… ▽ More For NOvA and future experiments requiring high intensity proton beams, Fermilab is in the process of upgrading the existing accelerator complex for increased proton production. One such improvement is to reduce the Main Injector cycle time, by performing slip stacking, previously done in the Main Injector, in the now repurposed Recycler Ring. Recycler slip stacking requires new tuneable RF cavities, discussed separately in these proceedings. These are quarter wave cavities resonant at 52.809 MHz with a 10 kHz tuning range. The 10 kHz range is achieved by use of a tuner which has an electrical length of approximately one half wavelength at 52.809 MHz. The tuner is constructed from 3 1/8 inch diameter rigid coaxial line, with 5 inches of its length containing perpendicularly biased, Al doped Yttrium Iron Garnet (YIG). The tuner design, measurements, and high power test results are presented. △ Less

Submitted 19 September, 2014; originally announced September 2014.

Comments: 3 p. Presented at North American Particle Accelerator Conference (PAC 2013) Conference

Report number: FERMILAB-CONF-13-363-APC

Storage Ring And Interaction Region Magnets For A μ+μ- Higgs Factory

Authors: A. V. Zlobin, Y. I. Alexahin, V. V. Kappin, V. V. Kashikhin, N. V. Mokhov, S. I. Striganov, I. S. Tropin

Abstract: A low-energy Muon Collider (MC) offers unique opportunities to study the recently found Higgs boson. However, due to a relatively large beam emittance with moderate cooling in this machine, large-aperture high- field superconducting (SC) magnets are required. The magnets need also an adequate margin to operate at a large radiation load from the muon decay showers. General specifications of the SC… ▽ More A low-energy Muon Collider (MC) offers unique opportunities to study the recently found Higgs boson. However, due to a relatively large beam emittance with moderate cooling in this machine, large-aperture high- field superconducting (SC) magnets are required. The magnets need also an adequate margin to operate at a large radiation load from the muon decay showers. General specifications of the SC dipoles and quadrupoles for the 125 GeV c.o.m. Higgs Factory with an average luminosity of ~2x10**31 cm-2s-1 are formulated. Magnet conceptual designs and parameters are reported. The impact of the magnet fringe fields on the beam dynamics as well as the IR and lattice magnet protection from radiation are also reported and discussed. △ Less

Submitted 18 September, 2014; originally announced September 2014.

Comments: 3 p. Presented at North American Particle Accelerator Conference (PAC 2013) Conference

Report number: FERMILAB-CONF-13-411-APC-TD

Mu2e Conceptual Design Report

Authors: The Mu2e Project, Collaboration, :, R. J. Abrams, D. Alezander, G. Ambrosio, N. Andreev, C. M. Ankenbrandt, D. M. Asner, D. Arnold, A. Artikov, E. Barnes, L. Bartoszek, R. H. Bernstein, K. Biery, V. Biliyar, R. Bonicalzi, R. Bossert, M. Bowden, J. Brandt, D. N. Brown, J. Budagov, M. Buehler, A. Burov, R. Carcagno , et al. (203 additional authors not shown)

Abstract: Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe… ▽ More Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the conceptual design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-1 approval, which was granted July 11, 2012. △ Less

Submitted 29 November, 2012; originally announced November 2012.

Comments: 562 pages, 339 figures

Report number: Fermilab-TM-2545

Muon collider interaction region design

Authors: Y. I. Alexahin, E. Gianfelice-Wendt, V. V. Kashikhin, N. V. Mokhov, A. V. Zlobin, V. Y. Alexakhin

Abstract: Design of a muon collider interaction region (IR) presents a number of challenges arising from low β* < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interlac… ▽ More Design of a muon collider interaction region (IR) presents a number of challenges arising from low β* < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interlaced and iterative. A consistent solution for the 1.5 TeV c.o.m. muon collider IR is presented. It can provide an average luminosity of 1034 cm-2s-1 with an adequate protection of magnet and detector components. △ Less

Submitted 25 April, 2012; originally announced April 2012.

Comments: 7 pp

Report number: FERMILAB-PUB-11-370-APC

Journal ref: Phys.Rev.ST Accel.Beams 14 (2011) 061001

Ring for test of nonlinear integrable optics

Authors: A. Valishev, S. Nagaitsev, V. Kashikhin, V. Danilov

Abstract: Nonlinear optics is a promising idea potentially opening the path towards achieving super high beam intensities in circular accelerators. Creation of a tune spread reaching 50% of the betatron tune would provide strong Landau dam** and make the beam immune to instabilities. Recent theoretical work has identified a possible way to implement stable nonlinear optics by incorporating nonlinear focus… ▽ More Nonlinear optics is a promising idea potentially opening the path towards achieving super high beam intensities in circular accelerators. Creation of a tune spread reaching 50% of the betatron tune would provide strong Landau dam** and make the beam immune to instabilities. Recent theoretical work has identified a possible way to implement stable nonlinear optics by incorporating nonlinear focusing elements into a specially designed machine lattice. In this report we propose the design of a test accelerator for a proof-of-principle experiment. We discuss possible studies at the machine, requirements on the optics stability and sensitivity to imperfections. △ Less

Submitted 24 February, 2012; originally announced February 2012.

Comments: 3 pp. Particle Accelerator, 24th Conference (PAC'11) 28 Mar - 1 Apr 2011: New York, USA

Report number: FERMILAB-CONF-11-114-AD-APC

Radiation effects in a muon collider ring and dipole magnet protection

Authors: N. V. Mokhov, V. V. Kashikhin, I. Novitski, A. V. Zlobin

Abstract: The requirements and operating conditions for a Muon Collider Storage Ring (MCSR) pose significant challenges to superconducting magnets. The dipole magnets should provide a high magnetic field to reduce the ring circumference and thus maximize the number of muon collisions during their lifetime. One third of the beam energy is continuously deposited along the lattice by the decay electrons at the… ▽ More The requirements and operating conditions for a Muon Collider Storage Ring (MCSR) pose significant challenges to superconducting magnets. The dipole magnets should provide a high magnetic field to reduce the ring circumference and thus maximize the number of muon collisions during their lifetime. One third of the beam energy is continuously deposited along the lattice by the decay electrons at the rate of 0.5 kW/m for a 1.5-TeV c.o.m. and a luminosity of 1034 cm-2s-1. Unlike dipoles in proton machines, the MCSR dipoles should allow this dynamic heat load to escape the magnet helium volume in the horizontal plane, predominantly towards the ring center. This paper presents the analysis and comparison of radiation effects in MCSR based on two dipole magnets designs. Tungsten masks in the interconnect regions are used in both cases to mitigate the unprecedented dynamic heat deposition and radiation in the magnet coils. △ Less

Submitted 23 February, 2012; originally announced February 2012.

Comments: 3 pp. Particle Accelerator, 24th Conference (PAC'11) 28 Mar - 1 Apr 2011: New York, USA

Report number: FERMILAB-CONF-11-095-APC

Muon Collider interaction region and machine-detector interface design

Authors: N. V. Mokhov, Y. I. Alexahin, V. V. Kashikhin, S. I. Striganov, A. V. Zlobin

Abstract: One of the key systems of a Muon Collider (MC) - seen as the most exciting option for the energy frontier machine in the post-LHC era - is its interaction region (IR). Designs of its optics, magnets and machine-detector interface are strongly interlaced and iterative. As a result of recent comprehensive studies, consistent solutions for the 1.5-TeV c.o.m. MC IR have been found and are described he… ▽ More One of the key systems of a Muon Collider (MC) - seen as the most exciting option for the energy frontier machine in the post-LHC era - is its interaction region (IR). Designs of its optics, magnets and machine-detector interface are strongly interlaced and iterative. As a result of recent comprehensive studies, consistent solutions for the 1.5-TeV c.o.m. MC IR have been found and are described here. To provide the required momentum acceptance, dynamic aperture and chromaticity, an innovative approach was used for the IR optics. Conceptual designs of large-aperture high-field dipole and high-gradient quadrupole magnets based on Nb3Sn superconductor were developed and analyzed in terms of the operating margin, field quality, mechanics, coil cooling and quench protection. Shadow masks in the interconnect regions and liners inside the magnets are used to mitigate the unprecedented dynamic heat deposition due to muon decays (~0.5 kW/m). It is shown that an appropriately designed machine-detector interface (MDI) with sophisticated shielding in the detector has a potential to substantially suppress the background rates in the MC detector. △ Less

Submitted 17 February, 2012; originally announced February 2012.

Comments: 3 pp. Particle Accelerator, 24th Conference (PAC'11) 28 Mar - 1 Apr 2011: New York, USA

Report number: FERMILAB-CONF-11-094-APC

Radiation and thermal analysis of production solenoid for Mu2e experimental setup

Authors: V. S. Pronskikh, V. V. Kashikhin, N. V. Mokhov

Abstract: The Muon-to-Electron (Mu2e) experiment at Fermilab, will seek the evidence of direct muon to electron conversion at the sensitivity level where it cannot be explained by the Standard Model. An 8-GeV 25-kW proton beam will be directed onto a tilted gold target inside a large-bore superconducting Production Solenoid (PS) with the peak field on the axis of ~5T. The negative muons resulting from the p… ▽ More The Muon-to-Electron (Mu2e) experiment at Fermilab, will seek the evidence of direct muon to electron conversion at the sensitivity level where it cannot be explained by the Standard Model. An 8-GeV 25-kW proton beam will be directed onto a tilted gold target inside a large-bore superconducting Production Solenoid (PS) with the peak field on the axis of ~5T. The negative muons resulting from the pion decay will be captured in the PS aperture and directed by an S-shaped Transport Solenoid towards the stop** target inside the Detector Solenoid. In order for the superconducting magnets to operate reliably and with a sufficient safety margin, the peak neutron flux entering the coils must be reduced by 3 orders of magnitude that is achieved by means of a sophisticated absorber placed in the magnet aperture. The proposed absorber, consisting of W- and Cu-based alloy parts, is optimized for the performance and cost. Results of MARS15 simulations of energy deposition and radiation are reported. The results of the PS magnet thermal analysis, coordinated with the coil cooling scheme, are reported as well for the selected absorber design. △ Less

Submitted 17 February, 2012; originally announced February 2012.

Comments: 4 pp. Particle Accelerator, 24th Conference (PAC'11) 28 Mar - 1 Apr 2011: New York, USA

Report number: FERMILAB-CONF-11-125-APC

Conceptual designs of dipole magnet for muon collider ring

Authors: I. Novitski, V. V. Kashikhin, N. Mokhov, A. V. Zlobin

Abstract: Conceptual designs of a superconducting dipole magnet for a Storage Ring of a Muon Collider with a 1.5 TeV center of mass (c.o.m.) energy and an average luminosity of 10 34 cm-2s-1 are presented. In contrast to proton machines, the dipoles for the Muon Collider should be able to handle ~0.5 kW/m of dynamic heat load from the muon beam decays. The magnets are based on Nb3Sn superconductor and desig… ▽ More Conceptual designs of a superconducting dipole magnet for a Storage Ring of a Muon Collider with a 1.5 TeV center of mass (c.o.m.) energy and an average luminosity of 10 34 cm-2s-1 are presented. In contrast to proton machines, the dipoles for the Muon Collider should be able to handle ~0.5 kW/m of dynamic heat load from the muon beam decays. The magnets are based on Nb3Sn superconductor and designed to provide an operating field of 10 T in the 20-mm aperture with the critical current margin required for reliable machine operation. The magnet cross-sections were optimized to achieve the best possible field quality in the aperture occupied by beams. The developed mechanical structures provide adequate coil prestress and support at the maximum level of Lorentz forces in the coil. Magnet parameters are reported and compared with the requirements. △ Less

Submitted 10 February, 2012; originally announced February 2012.

Comments: 4 pp. Applied Superconductivity Conference (ASC 2010), 1-6 Aug 2010: Washington, D.C

Report number: FERMILAB-CONF-10-277-APC-TD

Journal ref: IEEE Trans.Appl.Supercond. 21 (2011) 1825-1828

120-mm superconducting quadrupole for interaction regions of hadron colliders

Authors: A. V. Zlobin, V. V. Kashikhin, N. V. Mokhov, I. Novitski

Abstract: Magnetic and mechanical designs of a Nb3Sn quadrupole magnet with 120-mm aperture suitable for interaction regions of hadron colliders are presented. The magnet is based on a two-layer shell-type coil and a cold iron yoke. Special spacers made of a low-Z material are implemented in the coil mid-planes to reduce the level of radiation heat deposition and radiation dose in the coil. The quadrupole m… ▽ More Magnetic and mechanical designs of a Nb3Sn quadrupole magnet with 120-mm aperture suitable for interaction regions of hadron colliders are presented. The magnet is based on a two-layer shell-type coil and a cold iron yoke. Special spacers made of a low-Z material are implemented in the coil mid-planes to reduce the level of radiation heat deposition and radiation dose in the coil. The quadrupole mechanical structure is based on aluminum collars supported by an iron yoke and a stainless steel skin. Magnet parameters including maximum field gradient and field harmonics, Nb3Sn coil pre-stress and protection at the operating temperatures of 4.5 and 1.9 K are reported. The level and distribution of radiation heat deposition in the coil and other magnet components are discussed. △ Less

Submitted 1 February, 2012; originally announced February 2012.

Comments: 3 pp. 1st International Particle Accelerator Conference: IPAC'10, 23-28 May 2010: Kyoto, Japan

Report number: FERMILAB-CONF-10-133-APC-TD

Magnet designs for muon collider ring and interactions regions

Authors: A. V. Zlobin, Y. I. Alexahin, V. V. Kashikhin, N. V. Mokhov

Abstract: Conceptual designs of superconducting magnets for the storage ring of a Muon Collider with a 1.5 TeV c.o.m. energy and an average luminosity of 10 34 cm-2s-1 are presented. All magnets are based on Nb3Sn superconductor and designed to provide an adequate operating field/field gradient in the aperture with the critical current margin required for reliable magnet operation in the machine. Magnet cro… ▽ More Conceptual designs of superconducting magnets for the storage ring of a Muon Collider with a 1.5 TeV c.o.m. energy and an average luminosity of 10 34 cm-2s-1 are presented. All magnets are based on Nb3Sn superconductor and designed to provide an adequate operating field/field gradient in the aperture with the critical current margin required for reliable magnet operation in the machine. Magnet cross-sections were optimized to achieve the accelerator field quality in the magnet aperture occupied with beams. The magnets and corresponding protective measures are designed to handle about 0.5 kW/m of dynamic heat load from the muon beam decays. Magnet parameters are reported and compared with the requirements. △ Less

Submitted 1 February, 2012; originally announced February 2012.

Comments: 3 pp. 1st International Particle Accelerator Conference: IPAC'10, 23-28 May 2010: Kyoto, Japan

Report number: FERMILAB-CONF-10-132-APC-TD

Muon collider interaction region design

Authors: Y. I. Alexahin, E. Gianfelice-Wendt, V. V. Kashikhin, N. V. Mokhov, A. V. Zlobin, V. Y. Alexakhin

Abstract: Design of a muon collider interaction region (IR) presents a number of challenges arising from low β * < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interla… ▽ More Design of a muon collider interaction region (IR) presents a number of challenges arising from low β * < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interlaced and iterative. A consistent solution for the 1.5 TeV c.o.m. muon collider IR is presented. It can provide an average luminosity of 1034 cm-2s-1 with an adequate protection of magnet and detector components. △ Less

Submitted 1 February, 2012; originally announced February 2012.

Comments: 3 pp. 1st International Particle Accelerator Conference: IPAC'10, 23-28 May 2010: Kyoto, Japan

Report number: FERMILAB-CONF-10-106-APC

Simulation of RF Cavity Dark Current in Presence of Helical Magnetic Field

Authors: Gennady Romanov, Vladimir Kashikhin

Abstract: In order to produce muon beam of high enough quality to be used for a Muon Collider, its large phase space must be cooled several orders of magnitude. This task can be accomplished by ionization cooling. Ionization cooling consists of passing a high-emittance muon beam alternately through regions of low Z material, such as liquid hydrogen, and very high accelerating RF cavities within a multi-Tesl… ▽ More In order to produce muon beam of high enough quality to be used for a Muon Collider, its large phase space must be cooled several orders of magnitude. This task can be accomplished by ionization cooling. Ionization cooling consists of passing a high-emittance muon beam alternately through regions of low Z material, such as liquid hydrogen, and very high accelerating RF cavities within a multi-Tesla solenoidal focusing channel. But first high power tests of RF cavity with beryllium windows in solenoidal magnetic field showed a dramatic drop in accelerating gradient due to RF breakdowns. It has been concluded that external magnetic fields parallel to RF electric field significantly modifies the performance of RF cavities. However, magnetic field in Helical Cooling Channel has a strong dipole component in addition to solenoidal one. The dipole component essentially changes electron motion in a cavity compare to pure solenoidal case, making dark current less focused at field emission sites. The simulation of dark current dynamic in HCC performed with CST Studio Suit is presented in this paper. △ Less

Submitted 9 September, 2010; originally announced September 2010.

Comments: 10 pages, 15 figures

Report number: FERMILAB-TM-2467-TP

Operational aspects of the Main Injector large aperture quadrupole (WQB)

Authors: W. Chou, L. Bartelson, B. Brown, D. Capista, J. Crisp, J. DiMarco, J. Fitzgerald, H. Glass, D. Harding, D. Johnson, V. Kashikhin, I. Kourbanis, P. Prieto, W. Robotham, T. Sager, M. Tartaglia, L. Valerio, R. Webber, M. Wendt, D. Wolff, M. Yang

Abstract: A two-year Large Aperture Quadrupole (WQB) Project was completed in the summer of 2006 at Fermilab. Nine WQBs were designed, fabricated and bench-tested by the Technical Division. Seven of them were installed in the Main Injector and the other two for spares. They perform well. The aperture increase meets the design goal and the perturbation to the lattice is minimal. The machine acceptance in t… ▽ More A two-year Large Aperture Quadrupole (WQB) Project was completed in the summer of 2006 at Fermilab. Nine WQBs were designed, fabricated and bench-tested by the Technical Division. Seven of them were installed in the Main Injector and the other two for spares. They perform well. The aperture increase meets the design goal and the perturbation to the lattice is minimal. The machine acceptance in the injection and extraction regions is increased from 40pi to 60pi mm-mrad. This paper gives a brief report of the operation and performance of these magnets. △ Less

Submitted 26 February, 2008; originally announced February 2008.

Comments: 2007 Particle Accelerator Conference (PAC07)

Report number: FERMILAB-CONF-07-344-AD

Journal ref: Conf.Proc.C070625:1685,2007

Detectors and flux instrumentation for future neutrino facilities

Authors: T. Abe, H. Aihara, C. Andreopoulos, A. Ankowski, A. Badertscher, G. Battistoni, A. Blondel, J. Bouchez, A. Bross, A. Bueno, L. Camilleri, J. E. Campagne, A. Cazes, A. Cervera-Villanueva, G. De Lellis, F. Di Capua, M. Ellis, A. Ereditato, L. S. Esposito, C. Fukushima, E. Gschwendtner, J. J. Gomez-Cadenas, M. Iwasaki, K. Kaneyuki, Y. Karadzhov , et al. (44 additional authors not shown)

Abstract: This report summarises the conclusions from the detector group of the International Sco** Study of a future Neutrino Factory and Super-Beam neutrino facility. The baseline detector options for each possible neutrino beam are defined as follows: 1. A very massive (Megaton) water Cherenkov detector is the baseline option for a sub-GeV Beta Beam and Super Beam facility. 2. There are a number… ▽ More This report summarises the conclusions from the detector group of the International Sco** Study of a future Neutrino Factory and Super-Beam neutrino facility. The baseline detector options for each possible neutrino beam are defined as follows: 1. A very massive (Megaton) water Cherenkov detector is the baseline option for a sub-GeV Beta Beam and Super Beam facility. 2. There are a number of possibilities for either a Beta Beam or Super Beam (SB) medium energy facility between 1-5 GeV. These include a totally active scintillating detector (TASD), a liquid argon TPC or a water Cherenkov detector. 3. A 100 kton magnetized iron neutrino detector (MIND) is the baseline to detect the wrong sign muon final states (golden channel) at a high energy (20-50 GeV) neutrino factory from muon decay. A 10 kton hybrid neutrino magnetic emulsion cloud chamber detector for wrong sign tau detection (silver channel) is a possible complement to MIND, if one needs to resolve degeneracies that appear in the $δ$-$θ_{13}$ parameter space. △ Less

Submitted 26 December, 2007; originally announced December 2007.

Comments: Detector report of the International Sco** Study of a future Neutrino Factory and Super-Beam facility, 86 pages, 49 figures

Report number: RAL-TR-2007-24

Journal ref: JINST 4:T05001,2009