Showing 1–8 of 8 results for author: Kane, M

Chaos spectrum -- semiconductor laser with delayed optical feedback

Authors: D M Kane, M Radziunas

Abstract: Maximizing the rf bandwidth associated with the chaotic output from tailored operation of nonlinear semiconductor laser systems is an ongoing research effort. The early pioneering research was done in semiconductor laser with delayed optical feedback systems, which continue to be researched. We report numerical simulations of this system, using a travelling wave model. The results provide new insi… ▽ More Maximizing the rf bandwidth associated with the chaotic output from tailored operation of nonlinear semiconductor laser systems is an ongoing research effort. The early pioneering research was done in semiconductor laser with delayed optical feedback systems, which continue to be researched. We report numerical simulations of this system, using a travelling wave model. The results provide new insights into the impact of key device parameters affecting the chaos bandwidth and spectrum. Linewidth enhancement factor and the nonlinear gain saturation parameter are found to be the most important parameters when seeking to optimize the chaotic output. We reassess a standard definition being used to report chaos bandwidth. We propose that more spectral information should be reported if numerical and experimental research results are to be of most value into the future. A database from previous experimental study is also analyzed to connect with the predictions of the numerical simulations. This elucidates the links between the chaos bandwidth achieved in real systems and the semiconductor laser parameters. The results inform recommendations for semiconductor laser parameters that will better support broadband chaos generation in whatever semiconductor-gain-medium-based nonlinear system approach is being used. They elucidate the physics of both the envelope and the fine structure of the rf spectrum of coherence collapse. △ Less

Submitted 21 December, 2023; originally announced December 2023.

An Optically Thin View of the Flaring Chromosphere: Nonthermal widths in a chromospheric condensation during an X-class solar flare

Authors: Graham S. Kerr, Adam F. Kowalski, Joel C. Allred, Adrian N. Daw, Melissa R. Kane

Abstract: The bulk of solar flare energy is deposited in the chromosphere. Flare ribbons and footpoints in the chromosphere therefore offer great diagnostic potential of flare energy release and transport processes. High quality observations from the IRIS spacecraft have transformed our view of the Sun's atmospheric response to flares. Since most of the chromospheric lines observed by IRIS are optically thi… ▽ More The bulk of solar flare energy is deposited in the chromosphere. Flare ribbons and footpoints in the chromosphere therefore offer great diagnostic potential of flare energy release and transport processes. High quality observations from the IRIS spacecraft have transformed our view of the Sun's atmospheric response to flares. Since most of the chromospheric lines observed by IRIS are optically thick, forward modelling is required to fully appreciate and extract the information they carry. Reproducing certain aspects of the Mg II lines remain frustratingly out of reach in state-of-the-art flare models, which are unable to satisfactorily reproduce the very broad line profiles. A commonly proposed resolution to this is to assert that very large values of `microturbulence' is present. We asses the validity of that approach by analysing optically thin lines in the flare chromosphere from the X-class flare SOL2014-10-25T17:08:00, using the derived value of nonthermal width as a constraint to our numerical models. A nonthermal width of the order 10~km~s$^{-1}$ was found within the short-lived red wing components of three spectral lines, with relatively narrow stationary components. Simulations of this flare were produced, and in the post-processing spectral synthesis we include within the downflows a microturbulence of 10~km~s$^{-1}$. While we can reproduce the O I 1355.598~Å line rather well, and we can capture the general shape and properties of the Mg II line widths, the synthetic lines are still too narrow. △ Less

Submitted 10 October, 2023; originally announced October 2023.

Comments: Accepted for publication in Monthly Notices of the Royal Astronomical Society

Efficient Bayesian estimation of permutation entropy with Dirichlet priors

Authors: Douglas J. Little, Joshua P. Toomey, Deb M. Kane

Abstract: Estimation of permutation entropy (PE) using Bayesian statistical methods is presented for systems where the ordinal pattern sampling follows an independent, multinomial distribution. It is demonstrated that the PE posterior distribution is closely approximated by a standard Beta distribution, whose hyperparameters can be estimated directly from moments computed analytically from observed ordinal… ▽ More Estimation of permutation entropy (PE) using Bayesian statistical methods is presented for systems where the ordinal pattern sampling follows an independent, multinomial distribution. It is demonstrated that the PE posterior distribution is closely approximated by a standard Beta distribution, whose hyperparameters can be estimated directly from moments computed analytically from observed ordinal pattern counts. Equivalence with expressions derived previously using frequentist methods is also demonstrated. Because Bayesian estimation of PE naturally incorporates uncertainty and prior information, the orthodox requirement that $N \gg D!$ is effectively circumvented, allowing PE to be estimated even for very short time series. Self-similarity tests on PE posterior distributions computed for a semiconductor laser with optical feedback (SLWOF) system show its PE to vary periodically over time. △ Less

Submitted 18 April, 2021; originally announced April 2021.

Comments: 9 pages, 4 figures

MSC Class: 37A35 (primary) 92F15; 37N20 (secondary)

Single femtosecond laser pulse interaction with mica

Authors: Saurabh Awasthi, Douglas J. Little, A. Fuerbach, D. M. Kane

Abstract: Ultrafast, femtosecond laser pulse interaction with dielectric materials has shown them to have significantly higher laser fluence threshold requirements, as compared to metals and semiconductors, for laser material modification, such as laser ablation. Examples of dielectrics are crystalline materials such as quartz and sapphire, and amorphous glasses. The interaction between femtosecond laser pu… ▽ More Ultrafast, femtosecond laser pulse interaction with dielectric materials has shown them to have significantly higher laser fluence threshold requirements, as compared to metals and semiconductors, for laser material modification, such as laser ablation. Examples of dielectrics are crystalline materials such as quartz and sapphire, and amorphous glasses. The interaction between femtosecond laser pulses, at a wavelength with negligible linear absorption, and a dielectric has been found to be weak, and multiple pulse irradiation is therefore typically used in order to see significant and quantifiable effects. In this study the dielectric is the crystalline, layered, natural mineral muscovite, a mica with formula KAl_2 (Si_3 Al) O_10 (OH)_2. Muscovite, newly cleaved, is used in a wide range of technological and scientific applications including as an insulating material in electronics and as an ultra-flat and ultra-clean substrate. A single, ~800 nm wavelength, ~6 micron spotsize, ~150 fs laser pulse is found to lead to a systematic range of laser modification topologies, as a function of the fluence of the single laser pulse, including bulk removal of material. The fs laser pulse/material interaction is greater than expected for a standard dielectric at a given fluence. Optical surface profiling and FESEM are used to characterise the topologies. Contrasting the results of the two techniques supports the use of optical surface profiling to characterise the material modification despite its limitations in lateral resolution as compared to FESEM. The interlayer mineral water content of natural muscovite is proposed as the primary reason that mica behaves differently to a standard dielectric when irradiated with a single 800 nm fs laser pulse. △ Less

Submitted 15 August, 2019; originally announced September 2019.

HEP Software Foundation Community White Paper Working Group - Data and Software Preservation to Enable Reuse

Authors: M. D. Hildreth, A. Boehnlein, K. Cranmer, S. Dallmeier, R. Gardner, T. Hacker, L. Heinrich, I. Jimenez, M. Kane, D. S. Katz, T. Malik, C. Maltzahn, M. Neubauer, S. Neubert, Jim Pivarski, E. Sexton, J. Shiers, T. Simko, S. Smith, D. South, A. Verbytskyi, G. Watts, J. Wozniak

Abstract: In this chapter of the High Energy Physics Software Foundation Community Whitepaper, we discuss the current state of infrastructure, best practices, and ongoing developments in the area of data and software preservation in high energy physics. A re-framing of the motivation for preservation to enable re-use is presented. A series of research and development goals in software and other cyberinfrast… ▽ More In this chapter of the High Energy Physics Software Foundation Community Whitepaper, we discuss the current state of infrastructure, best practices, and ongoing developments in the area of data and software preservation in high energy physics. A re-framing of the motivation for preservation to enable re-use is presented. A series of research and development goals in software and other cyberinfrastructure that will aid in the enabling of reuse of particle physics analyses and production software are presented and discussed. △ Less

Submitted 2 October, 2018; originally announced October 2018.

Report number: HSF-CWP-2017-06

Machine Learning in High Energy Physics Community White Paper

Authors: Kim Albertsson, Piero Altoe, Dustin Anderson, John Anderson, Michael Andrews, Juan Pedro Araque Espinosa, Adam Aurisano, Laurent Basara, Adrian Bevan, Wahid Bhimji, Daniele Bonacorsi, Bjorn Burkle, Paolo Calafiura, Mario Campanelli, Louis Capps, Federico Carminati, Stefano Carrazza, Yi-fan Chen, Taylor Childers, Yann Coadou, Elias Coniavitis, Kyle Cranmer, Claire David, Douglas Davis, Andrea De Simone , et al. (103 additional authors not shown)

Abstract: Machine learning has been applied to several problems in particle physics research, beginning with applications to high-level physics analysis in the 1990s and 2000s, followed by an explosion of applications in particle and event identification and reconstruction in the 2010s. In this document we discuss promising future research and development areas for machine learning in particle physics. We d… ▽ More Machine learning has been applied to several problems in particle physics research, beginning with applications to high-level physics analysis in the 1990s and 2000s, followed by an explosion of applications in particle and event identification and reconstruction in the 2010s. In this document we discuss promising future research and development areas for machine learning in particle physics. We detail a roadmap for their implementation, software and hardware resource requirements, collaborative initiatives with the data science community, academia and industry, and training the particle physics community in data science. The main objective of the document is to connect and motivate these areas of research and development with the physics drivers of the High-Luminosity Large Hadron Collider and future neutrino experiments and identify the resource needs for their implementation. Additionally we identify areas where collaboration with external communities will be of great benefit. △ Less

Submitted 16 May, 2019; v1 submitted 8 July, 2018; originally announced July 2018.

Comments: Editors: Sergei Gleyzer, Paul Seyfert and Steven Schramm

HEP Software Foundation Community White Paper Working Group - Software Development, Deployment and Validation

Authors: Benjamin Couturier, Giulio Eulisse, Hadrien Grasland, Benedikt Hegner, Michel Jouvin, Meghan Kane, Daniel S. Katz, Thomas Kuhr, David Lange, Patricia Mendez Lorenzo, Martin Ritter, Graeme Andrew Stewart, Andrea Valassi

Abstract: The High Energy Phyiscs community has developed and needs to maintain many tens of millions of lines of code and to integrate effectively the work of thousands of developers across large collaborations. Software needs to be built, validated, and deployed across hundreds of sites. Software also has a lifetime of many years, frequently beyond that of the original developer, it must be developed with… ▽ More The High Energy Phyiscs community has developed and needs to maintain many tens of millions of lines of code and to integrate effectively the work of thousands of developers across large collaborations. Software needs to be built, validated, and deployed across hundreds of sites. Software also has a lifetime of many years, frequently beyond that of the original developer, it must be developed with sustainability in mind. Adequate recognition of software development as a critical task in the HEP community needs to be fostered and an appropriate publication and citation strategy needs to be developed. As part of the HEP Softare Foundation's Community White Paper process a working group on Software Development, Deployment and Validation was formed to examine all of these issues, identify best practice and to formulare recommendations for the next decade. Its report is presented here. △ Less

Submitted 15 June, 2018; v1 submitted 21 December, 2017; originally announced December 2017.

Report number: HSF-CWP-2017-13

A Roadmap for HEP Software and Computing R&D for the 2020s

Authors: Johannes Albrecht, Antonio Augusto Alves Jr, Guilherme Amadio, Giuseppe Andronico, Nguyen Anh-Ky, Laurent Aphecetche, John Apostolakis, Makoto Asai, Luca Atzori, Marian Babik, Giuseppe Bagliesi, Marilena Bandieramonte, Sunanda Banerjee, Martin Barisits, Lothar A. T. Bauerdick, Stefano Belforte, Douglas Benjamin, Catrin Bernius, Wahid Bhimji, Riccardo Maria Bianchi, Ian Bird, Catherine Biscarat, Jakob Blomer, Kenneth Bloom, Tommaso Boccali , et al. (285 additional authors not shown)

Abstract: Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for… ▽ More Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade. △ Less

Submitted 19 December, 2018; v1 submitted 18 December, 2017; originally announced December 2017.

Report number: HSF-CWP-2017-01

Journal ref: Comput Softw Big Sci (2019) 3, 7