-
On the two-dimensional Brillouin flow
Authors:
Ryan A. Revolinsky,
Christopher J. Swenson,
Nicholas M. Jordan,
Y. Y. Lau,
Ronald M. Gilgenbach
Abstract:
The Brillouin flow is a rectilinear, sheared electron fluid flow in a crossed electric field (E) and magnetic field (B), in the E x B direction with zero flow velocity and zero electric field at the surface with which the flow is in contact. It is broadly considered as the equilibrium electron flow in high power crossed-field devices including the magnetron and magnetically insulated transmission…
▽ More
The Brillouin flow is a rectilinear, sheared electron fluid flow in a crossed electric field (E) and magnetic field (B), in the E x B direction with zero flow velocity and zero electric field at the surface with which the flow is in contact. It is broadly considered as the equilibrium electron flow in high power crossed-field devices including the magnetron and magnetically insulated transmission line oscillators. This paper provides an examination of Brillouin flow in two dimensions, in a cylindrical geometry where the anode radius changes abruptly at a single axial location while the cathode surface has a constant radius. Our simulation confirms the proof that there is no equilibrium Brillouin flow solution for such a geometry. It further reveals that this change in the anode radius introduces novel bunching of the electrons within the Brillouin hub. This bunching occurs at low frequencies and is very pronounced if the Brillouin flow is from the small gap region to the large gap region, but is minimal if the Brillouin flow is from the large gap region to the small gap region. New insights are provided into the physical processes that initiate and sustain the bunching processes that are unique for a crossed-field diode, as compared with a non-magnetized diode. We argue that this enhanced bunching, and its concomitant formation of strong vortices, is not restricted to an abrupt change in the anode-cathode gap spacing.
△ Less
Submitted 19 April, 2024; v1 submitted 16 April, 2024;
originally announced April 2024.
-
Probing Purcell enhancement and photon collection efficiency of InAs quantum dots at nodes of the cavity electric field
Authors:
Matthew Jordan,
Petros Androvitsaneas,
Rachel N Clark,
Aristotelis Trapalis,
Ian Farrer,
Wolfgang Langbein,
Anthony J. Bennett
Abstract:
The interaction of excitonic transitions with confined photonic modes enables tests of quantum physics and design of efficient optoelectronic devices. Here we study how key metrics such as Purcell factor, beta-factor and collection efficiency are determined by the non-cavity modes which exist in real devices, taking the well-studied micropillar cavity as an example. Samples with dots at different…
▽ More
The interaction of excitonic transitions with confined photonic modes enables tests of quantum physics and design of efficient optoelectronic devices. Here we study how key metrics such as Purcell factor, beta-factor and collection efficiency are determined by the non-cavity modes which exist in real devices, taking the well-studied micropillar cavity as an example. Samples with dots at different positions in the cavity field allow us to quantify the effect of the non-cavity modes and show that the zero-phonon line and the phonon-assisted emission into the cavity mode HE11 is suppressed by positioning dots at the field node.
△ Less
Submitted 20 January, 2024;
originally announced January 2024.
-
Direct-write projection lithography of quantum dot micropillar single photon sources
Authors:
Petros Androvitsaneas,
Rachel N. Clark,
Matthew Jordan,
Tomas Peach,
Stuart Thomas,
Saleem Shabbir,
Angela D. Sobiesierski,
Aristotelis Trapalis,
Ian A. Farrer,
Wolfgang W. Langbein,
Anthony J. Bennett
Abstract:
We have developed a process to mass-produce quantum dot micropillar cavities using direct-write lithography. This technique allows us to achieve high volume patterning of high aspect ratio pillars with vertical, smooth sidewalls maintaining a high quality factor for diameters below 2.0 $μ$m. Encapsulating the cavities in a thin layer of oxide (Ta$_2$O$_5$) prevents oxidation in the atmosphere, pre…
▽ More
We have developed a process to mass-produce quantum dot micropillar cavities using direct-write lithography. This technique allows us to achieve high volume patterning of high aspect ratio pillars with vertical, smooth sidewalls maintaining a high quality factor for diameters below 2.0 $μ$m. Encapsulating the cavities in a thin layer of oxide (Ta$_2$O$_5$) prevents oxidation in the atmosphere, preserving the optical properties of the cavity over months of ambient exposure. We confirm that single dots in the cavities can be deterministically excited to create high purity indistinguishable single photons with interference visibility $(96.2\pm0.7)\%$.
△ Less
Submitted 31 March, 2023;
originally announced April 2023.
-
The rotational disruption of porous dust aggregates from ab-initio kinematic calculations
Authors:
Stefan Reissl,
Philipp Nguyen,
Lucas M. Jordan,
Ralf S. Klessen
Abstract:
Context: The sizes of dust in the interstellar medium follows a distribution where most of the dust mass is in smaller grains. However, the re-distribution from larger grains towards smaller sizes especially by means of rotational disruption is poorly understood. Aims: We aim to study the dynamics of porous grain aggregates under accelerated ration. Especially, we determine the deformation of the…
▽ More
Context: The sizes of dust in the interstellar medium follows a distribution where most of the dust mass is in smaller grains. However, the re-distribution from larger grains towards smaller sizes especially by means of rotational disruption is poorly understood. Aims: We aim to study the dynamics of porous grain aggregates under accelerated ration. Especially, we determine the deformation of the grains and the maximal angular velocity up to the rotational disruption event by caused by centrifugal forces. Methods: We pre-calculate aggregates my means of ballistic aggregation analogous to the interstellar dust as input for subsequent numerical simulations. In detail, we perform three-dimensional N-body simulations mimicking the radiative torque spin-up process up to the point where the grain aggregates become rotationally disrupted. Results: Our simulations results are in agreement with theoretical models predicting a characteristic angular velocity $ω_{\mathrm{disr}}$ of the order of ${ 10^8 - 10^9\ \mathrm{rad\ s^{-1}} }$, where grains become rotationally disrupted. In contrast to theoretical predictions, we show that for large porous aggregates ($< 300\ \mathrm{nm}$) $ω_{\mathrm{disr}}$ reaches a lower asymptotic value. Hence, such grains can withstand an accelerated ration more efficiently up to a factor of 10 because the displacement of mass by centrifugal forces and the subsequent mechanical deformation supports the buildup of new connections within the aggregate. Furthermore, we report that the rapid rotation of grains deforms an ensemble with initially 50:50 prolate and oblate shapes, respectively, preferentially into oblate shapes. Finally, we present a best fit formula to predict the average rotational disruption of an ensemble of porous dust aggregates dependent on internal grain structure, total number of monomers, and applied material properties.
△ Less
Submitted 30 January, 2023;
originally announced January 2023.
-
The Effect of Non-Gaussian Noise on Auto-correlative Weak-value Amplification
Authors:
**g-Hui Huang,
J. S. Lundeen,
Adetunmise C. Dada,
Kyle M. Jordan,
Guang-Jun Wang,
Xue-Ying Duan,
Xiang-Yun Hu
Abstract:
Accurate knowledge of the spectral features of noise and their influence on open quantum systems is fundamental for quantitative understanding and prediction of the dynamics in a realistic environment. For the weak measurements of two-level systems, the weak value obtained from experiments will inevitably be affected by the noise of the environment. Following our earlier work on the technique of t…
▽ More
Accurate knowledge of the spectral features of noise and their influence on open quantum systems is fundamental for quantitative understanding and prediction of the dynamics in a realistic environment. For the weak measurements of two-level systems, the weak value obtained from experiments will inevitably be affected by the noise of the environment. Following our earlier work on the technique of the auto-correlative weak-value amplification (AWVA) approach under a Gaussian noise environment, here we study the effect of non-Gaussian noise on the AWVA technique.In particular, two types of noise with a negative-dB signal-to-noise ratio, frequency-stationary noises and frequency-nonstationary noises are studied. The various frequency-stationary noises, including low-frequency (1/f) noises, medium-frequency noises, and high-frequency noises, are generated in Simulink by translating the Gaussian white noise with different band-pass filters. While impulsive noise is studied as an example of frequency-non stationary noises. Our simulated results demonstrate that 1/f noises and impulsive noises have greater disturbance on the AWVA measurements. In addition, adding one kind of frequency-stationary noise, clam** the detected signals, and dominating the measurement range may {have} the potential to improve the precision of the AWVA technique with both a smaller deviation of the mean value and a smaller error bar in the presence of many hostile non-Gaussian noises.
△ Less
Submitted 26 September, 2022; v1 submitted 26 September, 2022;
originally announced September 2022.
-
Quantum metrology timing limits of the Hong-Ou-Mandel interferometer and of general two-photon measurements
Authors:
Kyle M. Jordan,
Raphael A. Abrahao,
Jeff S. Lundeen
Abstract:
We examine the precision limits of Hong-Ou-Mandel (HOM) timing measurements, as well as precision limits applying to generalized two-photon measurements. As a special case, we consider the use of two-photon measurements using photons with variable bandwidths and frequency correlations. When the photon bandwidths are not equal, maximizing the measurement precision involves a trade-off between high…
▽ More
We examine the precision limits of Hong-Ou-Mandel (HOM) timing measurements, as well as precision limits applying to generalized two-photon measurements. As a special case, we consider the use of two-photon measurements using photons with variable bandwidths and frequency correlations. When the photon bandwidths are not equal, maximizing the measurement precision involves a trade-off between high interference visibility and strong frequency anticorrelations, with the optimal precision occuring when the photons share non-maximal frequency anticorrelations. We show that a generalized measurement has precision limits that are qualitatively similar to those of the HOM measurement whenever the generalized measurement is insensitive to the net delay of both photons. By examining the performance of states with more general frequency distributions, our analysis allows for engineering of the joint spectral amplitude for use in realistic situations, in which both photons may not have ideal spectral properties.
△ Less
Submitted 25 November, 2022; v1 submitted 22 June, 2022;
originally announced June 2022.
-
On the structure of isothermal acoustic shocks under classical and artificial viscosity laws: Selected case studies
Authors:
Sandra Carillo,
Pedro M. Jordan
Abstract:
Assuming Newton's law of cooling, the propagation and structure of isothermal acoustic shocks are studied under four different viscosity laws. Employing both analytical and numerical methods, 1D traveling wave solutions for the velocity and density fields are derived and analyzed. For each viscosity law considered, expressions for both the shock thickness and the asymmetry metric are determined. A…
▽ More
Assuming Newton's law of cooling, the propagation and structure of isothermal acoustic shocks are studied under four different viscosity laws. Employing both analytical and numerical methods, 1D traveling wave solutions for the velocity and density fields are derived and analyzed. For each viscosity law considered, expressions for both the shock thickness and the asymmetry metric are determined. And, to ensure that isothermal flow is achievable, upper bounds on the associated Mach number values are derived/computed using the isothermal version of the energy equation.
△ Less
Submitted 16 April, 2022;
originally announced April 2022.
-
Auto-correlative weak-value amplification under strong noise background
Authors:
**g-Hui Huang,
Xiang-Yun Hu,
Adetunmise C. Dada,
Jeff S. Lundeen,
Kyle M. Jordan,
Huan Chen,
Jian-Qi An
Abstract:
By choosing more orthogonality between pre-selection and post-selection states, one can significantly improve the sensitivity in the general optical quantum metrology based on the weak-value amplification (WVA) approach. However, increasing the orthogonality decreases the probability of detecting photons and makes the weak measurement difficult, especially when the weak measurement is disturbed by…
▽ More
By choosing more orthogonality between pre-selection and post-selection states, one can significantly improve the sensitivity in the general optical quantum metrology based on the weak-value amplification (WVA) approach. However, increasing the orthogonality decreases the probability of detecting photons and makes the weak measurement difficult, especially when the weak measurement is disturbed by strong noise and the pointer is drowned in noise with a negative-dB signal-to-noise ratio (SNR). In this article, we investigate a modified weak measurement protocol with a temporal pointer, namely, the auto-correlative weak-value amplification (AWVA) approach. Specifically, a small longitudinal time delay (tiny phase shift) $τ$ of a Gaussian pulse is measured by implementing two simultaneous auto-correlative weak measurements under Gaussian white noise with different SNR. The small quantities $τ$ are obtained by measuring the auto-correlation coefficient of the pulses instead of fitting the shift of the mean value of the probe in the standard WVA technique. Simulation results show that the AWVA approach outperforms the standard WVA technique in the time domain with smaller statistical errors, remarkably increasing the precision of weak measurement under strong noise background.
△ Less
Submitted 14 May, 2022; v1 submitted 29 March, 2022;
originally announced March 2022.
-
Quarantines as a Targeted Immunization Strategy
Authors:
Jessica Hoffmann,
Matt Jordan,
Constantine Caramanis
Abstract:
In the context of the recent COVID-19 outbreak, quarantine has been used to "flatten the curve" and slow the spread of the disease. In this paper, we show that this is not the only benefit of quarantine for the mitigation of an SIR epidemic spreading on a graph. Indeed, human contact networks exhibit a powerlaw structure, which means immunizing nodes at random is extremely ineffective at slowing t…
▽ More
In the context of the recent COVID-19 outbreak, quarantine has been used to "flatten the curve" and slow the spread of the disease. In this paper, we show that this is not the only benefit of quarantine for the mitigation of an SIR epidemic spreading on a graph. Indeed, human contact networks exhibit a powerlaw structure, which means immunizing nodes at random is extremely ineffective at slowing the epidemic, while immunizing high-degree nodes can efficiently guarantee herd immunity. We theoretically prove that if quarantines are declared at the right moment, high-degree nodes are disproportionately in the Removed state, which is a form of targeted immunization. Even if quarantines are declared too early, subsequent waves of infection spread slower than the first waves. This leads us to propose an opening and closing strategy aiming at immunizing the graph while infecting the minimum number of individuals, guaranteeing the population is now robust to future infections. To the best of our knowledge, this is the only strategy that guarantees herd immunity without requiring vaccines. We extensively verify our results on simulated and real-life networks.
△ Less
Submitted 20 February, 2021; v1 submitted 19 August, 2020;
originally announced August 2020.
-
Acoustic shock and acceleration waves in selected inhomogeneous fluids
Authors:
R. S. Keiffer,
P. M. Jordan,
I. C. Christov
Abstract:
Acoustic shock and acceleration waves in inhomogeneous fluids are investigated using both analytical and numerical methods. In the context of start-up signaling problems, and based on linear acoustics theory, we study the propagation of such waveforms in the atmosphere and in fluids that possess a periodic ambient density profile. It is shown that vertically-running shock and acceleration waves in…
▽ More
Acoustic shock and acceleration waves in inhomogeneous fluids are investigated using both analytical and numerical methods. In the context of start-up signaling problems, and based on linear acoustics theory, we study the propagation of such waveforms in the atmosphere and in fluids that possess a periodic ambient density profile. It is shown that vertically-running shock and acceleration waves in the atmosphere suffer amplitude growth. In contrast, those in the periodic-density fluid have bounded amplitudes that exhibit periodic, but non-trivial, oscillations; this is illustrated via a series of numerically-generated profile-evolution plots, which were computed using the PyClaw software package.
△ Less
Submitted 26 February, 2018; v1 submitted 26 November, 2017;
originally announced November 2017.
-
Single-laser 32.5 Tbit/s Nyquist WDM transmission
Authors:
David Hillerkuss,
Rene Schmogrow,
Matthias Meyer,
Stefan Wolf,
Meinert Jordan,
Philipp Kleinow,
Nicole Lindenmann,
Philipp C. Schindler,
Argishti Melikyan,
Xin Yang,
Shalva Ben-Ezra,
Bernd Nebendahl,
Michael Dreschmann,
Joachim Meyer,
Francesca Parmigiani,
Periklis Petropoulos,
Bojan Resan,
Aandreas Oehler,
Kurt Weingarten,
Lars Altenhain,
Tobias Ellermeyer,
Matthias Moeller,
Michael Huebner,
Juergen Becker,
Christian Koos
, et al. (2 additional authors not shown)
Abstract:
We demonstrate 32.5 Tbit/s 16QAM Nyquist WDM transmission over a total length of 227 km of SMF-28 without optical dispersion compensation. A number of 325 optical carriers are derived from a single laser and encoded with dual-polarization 16QAM data using sinc-shaped Nyquist pulses. As we use no guard bands, the carriers have a spacing of 12.5 GHz equal to the Nyquist bandwidth of the data. We ach…
▽ More
We demonstrate 32.5 Tbit/s 16QAM Nyquist WDM transmission over a total length of 227 km of SMF-28 without optical dispersion compensation. A number of 325 optical carriers are derived from a single laser and encoded with dual-polarization 16QAM data using sinc-shaped Nyquist pulses. As we use no guard bands, the carriers have a spacing of 12.5 GHz equal to the Nyquist bandwidth of the data. We achieve a high net spectral efficiency of 6.4 bit/s/Hz using a software-defined transmitter which generates the electrical modulator drive signals in real-time.
△ Less
Submitted 27 January, 2016; v1 submitted 12 March, 2012;
originally announced March 2012.
-
Comments on: "Starting solutions for some unsteady unidirectional flows of a second grade fluid," [Int. J. Eng. Sci. 43 (2005) 781]
Authors:
Ivan C. Christov,
P. M. Jordan
Abstract:
A significant mathematical error is identified and corrected in a recent highly-cited paper on oscillatory flows of second-grade fluids [Fetecau & Fetecau (2005). Int. J. Eng. Sci., 43, 781--789]. The corrected solutions are shown to agree identically with numerical ones generated by a finite-difference scheme, while the original ones of Fetecau & Fetecau do not. A list of other recent papers in t…
▽ More
A significant mathematical error is identified and corrected in a recent highly-cited paper on oscillatory flows of second-grade fluids [Fetecau & Fetecau (2005). Int. J. Eng. Sci., 43, 781--789]. The corrected solutions are shown to agree identically with numerical ones generated by a finite-difference scheme, while the original ones of Fetecau & Fetecau do not. A list of other recent papers in the literature that commit the error corrected in this Comment is compiled. Finally, a summary of related erroneous papers in this journal is presented as an Appendix.
△ Less
Submitted 18 November, 2011;
originally announced November 2011.
-
Photonic Wire Bonds for Terabit/s Chip-to-Chip Interconnects
Authors:
Nicole Lindenmann,
Gerhard Balthasar,
David Hillerkuss,
Rene Schmogrow,
Meinert Jordan,
Juerg Leuthold,
Wolfgang Freude,
Christian Koos
Abstract:
Photonic integration has witnessed tremendous progress over the last years, and chip-scale transceiver systems with Terabit/s data rates have come into reach. However, as on-chip integration density increases, efficient off-chip interfaces are becoming more and more crucial. A technological breakthrough is considered indispensable to cope with the challenges arising from large-scale photonic integ…
▽ More
Photonic integration has witnessed tremendous progress over the last years, and chip-scale transceiver systems with Terabit/s data rates have come into reach. However, as on-chip integration density increases, efficient off-chip interfaces are becoming more and more crucial. A technological breakthrough is considered indispensable to cope with the challenges arising from large-scale photonic integration, and this particularly applies to short-distance optical interconnects. In this letter we introduce the concept of photonic wire bonding, where transparent waveguide wire bonds are used to bridge the gap between nanophotonic circuits located on different chips. We demonstrate for the first time the fabrication of three-dimensional freeform photonic wire bonds (PWB), and we confirm their viability in a multi-Terabit/s data transmission experiment. First-generation prototypes allow for efficient broadband coupling with overall losses of only 1.6 dB. Photonic wire bonding will enable flexible optical multi-chip assemblies, thereby challenging the current paradigm of highly-complex monolithic integration.
△ Less
Submitted 2 November, 2011;
originally announced November 2011.
-
Nonparametric Link Prediction in Large Scale Dynamic Networks
Authors:
Purnamrita Sarkar,
Deepayan Chakrabarti,
Michael Jordan
Abstract:
We propose a nonparametric approach to link prediction in large-scale dynamic networks. Our model uses graph-based features of pairs of nodes as well as those of their local neighborhoods to predict whether those nodes will be linked at each time step. The model allows for different types of evolution in different parts of the graph (e.g, growing or shrinking communities). We focus on large-scale…
▽ More
We propose a nonparametric approach to link prediction in large-scale dynamic networks. Our model uses graph-based features of pairs of nodes as well as those of their local neighborhoods to predict whether those nodes will be linked at each time step. The model allows for different types of evolution in different parts of the graph (e.g, growing or shrinking communities). We focus on large-scale graphs and present an implementation of our model that makes use of locality-sensitive hashing to allow it to be scaled to large problems. Experiments with simulated data as well as five real-world dynamic graphs show that we outperform the state of the art, especially when sharp fluctuations or nonlinearities are present. We also establish theoretical properties of our estimator, in particular consistency and weak convergence, the latter making use of an elaboration of Stein's method for dependency graphs.
△ Less
Submitted 16 November, 2013; v1 submitted 6 September, 2011;
originally announced September 2011.
-
Modeling the Effects of Drug Binding on the Dynamic Instability of Microtubules
Authors:
Peter Hinow,
Vahid Rezania,
Manu Lopus,
Mary Ann Jordan,
Jack A. Tuszynski
Abstract:
We propose a stochastic model that accounts for the growth, catastrophe and rescue processes of steady state microtubules assembled from MAP-free tubulin. Both experimentally and theoretically we study the perturbation of microtubule dynamic instability by S-methyl-D-DM1, a synthetic derivative of the microtubule-targeted agent maytansine and a potential anticancer agent. We find that to be an eff…
▽ More
We propose a stochastic model that accounts for the growth, catastrophe and rescue processes of steady state microtubules assembled from MAP-free tubulin. Both experimentally and theoretically we study the perturbation of microtubule dynamic instability by S-methyl-D-DM1, a synthetic derivative of the microtubule-targeted agent maytansine and a potential anticancer agent. We find that to be an effective suppressor of microtubule dynamics a drug must primarily suppress the loss of GDP tubulin from the microtubule tip.
△ Less
Submitted 14 July, 2011; v1 submitted 12 October, 2010;
originally announced October 2010.