Showing 1–50 of 176 results for author: Jones, R

Scintillation Light in SBND: Simulation, Reconstruction, and Expected Performance of the Photon Detection System

Authors: SBND Collaboration, P. Abratenko, R. Acciarri, C. Adams, L. Aliaga-Soplin, O. Alterkait, R. Alvarez-Garrote, C. Andreopoulos, A. Antonakis, L. Arellano, J. Asaadi, W. Badgett, S. Balasubramanian, V. Basque, A. Beever, B. Behera, E. Belchior, M. Betancourt, A. Bhat, M. Bishai, A. Blake, B. Bogart, J. Bogenschuetz, D. Brailsford, A. Brandt , et al. (158 additional authors not shown)

Abstract: SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its… ▽ More SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its design is a dual readout concept combining a system of 120 photomultiplier tubes, used for triggering, with a system of 192 X-ARAPUCA devices, located behind the anode wire planes. Furthermore, covering the cathode plane with highly-reflective panels coated with a wavelength-shifting compound recovers part of the light emitted towards the cathode, where no optical detectors exist. We show how this new design provides a high light yield and a more uniform detection efficiency, an excellent timing resolution and an independent 3D-position reconstruction using only the scintillation light. Finally, the whole reconstruction chain is applied to recover the temporal structure of the beam spill, which is resolved with a resolution on the order of nanoseconds. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Comments: 21 pages, 17 figures

Report number: FERMILAB-PUB-24-0303-PPD

Polyconvex neural network models of thermoelasticity

Authors: Jan N. Fuhg, Asghar Jadoon, Oliver Weeger, D. Thomas Seidl, Reese E. Jones

Abstract: Machine-learning function representations such as neural networks have proven to be excellent constructs for constitutive modeling due to their flexibility to represent highly nonlinear data and their ability to incorporate constitutive constraints, which also allows them to generalize well to unseen data. In this work, we extend a polyconvex hyperelastic neural network framework to thermo-hyperel… ▽ More Machine-learning function representations such as neural networks have proven to be excellent constructs for constitutive modeling due to their flexibility to represent highly nonlinear data and their ability to incorporate constitutive constraints, which also allows them to generalize well to unseen data. In this work, we extend a polyconvex hyperelastic neural network framework to thermo-hyperelasticity by specifying the thermodynamic and material theoretic requirements for an expansion of the Helmholtz free energy expressed in terms of deformation invariants and temperature. Different formulations which a priori ensure polyconvexity with respect to deformation and concavity with respect to temperature are proposed and discussed. The physics-augmented neural networks are furthermore calibrated with a recently proposed sparsification algorithm that not only aims to fit the training data but also penalizes the number of active parameters, which prevents overfitting in the low data regime and promotes generalization. The performance of the proposed framework is demonstrated on synthetic data, which illustrate the expected thermomechanical phenomena, and existing temperature-dependent uniaxial tension and tension-torsion experimental datasets. △ Less

Submitted 23 April, 2024; originally announced April 2024.

Comments: 18 pages, 9 figures

Meteorites and Planet Formation

Authors: Rhian H. Jones

Abstract: Meteorites are a remarkable resource. They capture the imagination of people worldwide with their spectacular entry through Earth's atmosphere as fireballs, and their exotic character of being pieces of other worlds. Scientifically, they are critical to interpreting the early stages of formation of the Solar System, as well as the geological evolution of asteroids, the Moon, and Mars, and they are… ▽ More Meteorites are a remarkable resource. They capture the imagination of people worldwide with their spectacular entry through Earth's atmosphere as fireballs, and their exotic character of being pieces of other worlds. Scientifically, they are critical to interpreting the early stages of formation of the Solar System, as well as the geological evolution of asteroids, the Moon, and Mars, and they are vital to understanding planetary formation processes. With the burgeoning exploration of extrasolar planetary systems, knowledge of the fundamental process of planetary growth from protoplanetary disks has taken on a new significance. Meteorites provide essential and detailed insight into the formation of planetary systems, although we must bear in mind that they only represent one reference point (our own Solar System) in what is clearly a wide spectrum of possible chemical and physical parameters governing the diverse realm of extrasolar planets. This chapter summarises the nature of our meteorite collections, and the ways in which meteorites contribute to our understanding of the formation and evolution of our own Solar System, with broader implications for planetary systems in general. △ Less

Submitted 23 April, 2024; originally announced April 2024.

Comments: Chapter 4 accepted for publication in the Reviews in Mineralogy and Geochemistry (RiMG) Volume 90 on "Exoplanets: Compositions, Mineralogy, and Evolution" edited by Natalie Hinkel, Keith Putirka, and Siyi Xu; 15 pages and 7 figures

Efficient generation of realistic guided wave signals for reliability estimation

Authors: Panpan Xu, Robin Jones, Georgios Sarris, Peter Huthwaite

Abstract: Across non-destructive testing (NDT) and structural health monitoring (SHM), accurate knowledge of the systems' reliability for detecting defects, such as Probability of Detection (POD) analysis is essential to enabling widespread adoption. Traditionally this relies on access to extensive experimental data to cover all critical areas of the parametric space, which becomes expensive, and heavily un… ▽ More Across non-destructive testing (NDT) and structural health monitoring (SHM), accurate knowledge of the systems' reliability for detecting defects, such as Probability of Detection (POD) analysis is essential to enabling widespread adoption. Traditionally this relies on access to extensive experimental data to cover all critical areas of the parametric space, which becomes expensive, and heavily undermines the benefit such systems bring. In response to these challenges, reliability estimation based on numerical simulation emerges as a practical solution, offering enhanced efficiency and cost-effectiveness. Nevertheless, precise reliability estimation demands that the simulated data faithfully represents the real-world performance. In this context, a numerical framework tailored to generate realistic signals for reliability estimation purposes is presented here, focusing on the application of guided wave SHM for pipe monitoring. It specifically incorporates key characteristics of real signals: random noise and coherent noise caused by the imbalance in transducer performance within guided wave monitoring systems. The effectiveness of our proposed methodology is demonstrated through a comprehensive comparative analysis between simulation-generated signals and experimental signals both individually and statistically. Furthermore, to assess the reliability of a guided wave system in terms of the inspection range for pipe monitoring, a series of POD analyses using simulation-generated data were conducted. The comparison of POD curves derived from ideal and realistic simulation data underscores the necessity of considering coherent noise for accurate POD curve calculations. Moreover, the POD analysis based on realistic simulation-generated data provides a quantitative estimation of the inspection range with more details compared to the current industry practice. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Uncertainty Quantification of Graph Convolution Neural Network Models of Evolving Processes

Authors: Jeremiah Hauth, Cosmin Safta, Xun Huan, Ravi G. Patel, Reese E. Jones

Abstract: The application of neural network models to scientific machine learning tasks has proliferated in recent years. In particular, neural network models have proved to be adept at modeling processes with spatial-temporal complexity. Nevertheless, these highly parameterized models have garnered skepticism in their ability to produce outputs with quantified error bounds over the regimes of interest. Hen… ▽ More The application of neural network models to scientific machine learning tasks has proliferated in recent years. In particular, neural network models have proved to be adept at modeling processes with spatial-temporal complexity. Nevertheless, these highly parameterized models have garnered skepticism in their ability to produce outputs with quantified error bounds over the regimes of interest. Hence there is a need to find uncertainty quantification methods that are suitable for neural networks. In this work we present comparisons of the parametric uncertainty quantification of neural networks modeling complex spatial-temporal processes with Hamiltonian Monte Carlo and Stein variational gradient descent and its projected variant. Specifically we apply these methods to graph convolutional neural network models of evolving systems modeled with recurrent neural network and neural ordinary differential equations architectures. We show that Stein variational inference is a viable alternative to Monte Carlo methods with some clear advantages for complex neural network models. For our exemplars, Stein variational interference gave similar uncertainty profiles through time compared to Hamiltonian Monte Carlo, albeit with generally more generous variance.Projected Stein variational gradient descent also produced similar uncertainty profiles to the non-projected counterpart, but large reductions in the active weight space were confounded by the stability of the neural network predictions and the convoluted likelihood landscape. △ Less

Submitted 16 February, 2024; originally announced February 2024.

Comments: 27 pages, 20 figures

Do** Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon do** can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Connections between propulsive efficiency and wake structure via modal decomposition

Authors: Morgan R. Jones, Mitul Luhar, Eva Kanso

Abstract: We present experiments on oscillating hydrofoils undergoing combined heaving and pitching motions, paying particular attention to connections between propulsive efficiency and coherent wake features extracted using modal analysis. Time-averaged forces and particle image velocimetry (PIV) measurements of the flow field downstream of the foil are presented for a Reynolds number of Re=11$\times$10… ▽ More We present experiments on oscillating hydrofoils undergoing combined heaving and pitching motions, paying particular attention to connections between propulsive efficiency and coherent wake features extracted using modal analysis. Time-averaged forces and particle image velocimetry (PIV) measurements of the flow field downstream of the foil are presented for a Reynolds number of Re=11$\times$10$^3$ and Strouhal numbers in the range St=0.16-0.35. These conditions produce 2S and 2P wake patterns, as well as a near-momentumless wake structure. A triple decomposition using the optimized dynamic mode decomposition (opt-DMD) method is employed to identify dominant modal components (or coherent structures) in the wake. These structures can be connected to wake instabilities predicted using spatial stability analyses. Examining the modal components of the wake provides insightful explanations into the transition from drag to thrust production, and conditions that lead to peak propulsive efficiency. In particular, we find modes that correspond to the primary vortex development in the wakes. Other modal components capture elements of bluff body shedding at Strouhal numbers below the optimum for peak propulsive efficiency and characteristics of separation for Strouhal numbers higher than the optimum. △ Less

Submitted 15 March, 2024; v1 submitted 25 October, 2023; originally announced October 2023.

Comments: 28 pages, 14 figures

Journal ref: J. Fluid Mech. 988 (2024) A35

Reconfigurable non-reciprocal wave growth in spatiotemporal modulated 1-D crystal

Authors: Mohamed F. Hagag, Thomas R. Jones, Karim Seddik, Dimitrios Peroulis

Abstract: Nonreciprocity in space-time modulated photonic crystals has been investigated in the context of nonreciprocal propagation and polarization. Here, we investigate a reconfigurable nonreciprocal wave growth in space-time modulated crystals. Imposing an adaptable progressive phase shift between successive time-modulated cells results in blue and red shifts of the forward and backward momentum band ga… ▽ More Nonreciprocity in space-time modulated photonic crystals has been investigated in the context of nonreciprocal propagation and polarization. Here, we investigate a reconfigurable nonreciprocal wave growth in space-time modulated crystals. Imposing an adaptable progressive phase shift between successive time-modulated cells results in blue and red shifts of the forward and backward momentum band gaps around the typical 0.5 growth normalized frequency. We applied this spatiotemporal scheme to engineering the dispersion relation of a loaded transmission line$-$a 1D periodic structure$-$in the microwave regime. △ Less

Submitted 5 November, 2023; v1 submitted 25 October, 2023; originally announced October 2023.

Active Suppression of Quantum Dephasing in Resonantly Driven Ensembles

Authors: Chengxing He, Robert R. Jones

Abstract: We have used quantum control to suppress the impact of random atom positions on coherent population transfer within atom pairs, enabling the observation of dipole-dipole driven Rabi oscillations in a Rydberg gas with hundreds of atoms. The method exploits the reduced coupling-strength sensitivity of the off-resonant Rabi frequency, and coherently amplifies the achievable population transfer in ana… ▽ More We have used quantum control to suppress the impact of random atom positions on coherent population transfer within atom pairs, enabling the observation of dipole-dipole driven Rabi oscillations in a Rydberg gas with hundreds of atoms. The method exploits the reduced coupling-strength sensitivity of the off-resonant Rabi frequency, and coherently amplifies the achievable population transfer in analogy to quasi-phase-matching in non-linear optics. Simulations reproduce the experimental results and demonstrate the potential benefits of the technique to other many-body quantum control applications. △ Less

Submitted 2 January, 2024; v1 submitted 16 October, 2023; originally announced October 2023.

Signal Amplification in a Time-Modulated Transmission Line and the Loss Effect

Authors: Mohamed Hagag, Thomas Robert Jones, Karim Seddik, Dimitrios Peroulis

Abstract: We investigate and simulate signal amplification in a transmission line (TL) with time-modulated characteristic impedance Zo. Periodically varying $Z_o$ is achieved by loading TL with a sinusoidally time-modulated capacitor (TMC). For a detailed study, three models are considered: a lossless L-C TL lumped model loaded with shunt infinite quality factor (Q) TMC, a TL loaded with a shunt infinite Q… ▽ More We investigate and simulate signal amplification in a transmission line (TL) with time-modulated characteristic impedance Zo. Periodically varying $Z_o$ is achieved by loading TL with a sinusoidally time-modulated capacitor (TMC). For a detailed study, three models are considered: a lossless L-C TL lumped model loaded with shunt infinite quality factor (Q) TMC, a TL loaded with a shunt infinite Q TMC, and finite Q TMC. By solving the eigenvalue problem in all models, dispersion diagrams (DD) are plotted with a created momentum band gap (MBG) at a modulation frequency double the signal frequency. Within MBG, only imaginary frequencies are found and correlated to MBG width and signal growth level. Using Harmonics Balance (HB) and Transient Simulation (TS), signal amplification is confirmed, and the obtained results are consistent with the DD outcomes. In the second model, the effect of TL length on amplification is investigated and explained by studying the unit cell's Bloch impedance. The loss effect is considered by adding a series resistance (Rc) to the third model's TMC (finite Q). Decreasing amplification levels, confirmed by circuit modeling, due to the increase of Rc value is explained by studying real and imaginary DDs and the attenuation constant. △ Less

Submitted 3 November, 2023; v1 submitted 29 August, 2023; originally announced October 2023.

Time-Reflection of Microwaves by a Fast Optically-Controlled Time-Boundary

Authors: Thomas R. Jones, Alexander V. Kildishev, Mordechai Segev, Dimitrios Peroulis

Abstract: When an electromagnetic (EM) wave is propagating in a medium whose properties are varied abruptly in time, the wave experiences refractions and reflections known as "time-refractions" and "time-reflections", both manifesting spectral translation as a consequence of the abrupt change of the medium and the conservation of momentum. However, while the time-refracted wave continues to propagate with t… ▽ More When an electromagnetic (EM) wave is propagating in a medium whose properties are varied abruptly in time, the wave experiences refractions and reflections known as "time-refractions" and "time-reflections", both manifesting spectral translation as a consequence of the abrupt change of the medium and the conservation of momentum. However, while the time-refracted wave continues to propagate with the same wave-vector, the time-reflected wave is propagating backward with a conjugate phase, despite the lack of any spatial interface. Importantly, while time-refraction is always significant, observing time-reflection poses a major challenge - because it requires a large change in the medium occurring within a single cycle. For that reason, time-reflection of EM waves was observed only recently. Here, we present the observation of microwave pulses at the highest frequency ever observed (0.59 GHz), and the experimental evidence of the phase-conjugation nature of time-reflected waves. Our experiments are carried out in a periodically-loaded microstrip line with optically-controlled picosecond-switchable photodiodes. Our system paves the way to the experimental realization of Photonic Time-Crystals at GHz frequencies. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Emissions and Energy Impacts of the Inflation Reduction Act

Authors: John Bistline, Geoffrey Blanford, Maxwell Brown, Dallas Burtraw, Maya Domeshek, Jamil Farbes, Allen Fawcett, Anne Hamilton, Jesse Jenkins, Ryan Jones, Ben King, Hannah Kolus, John Larsen, Amanda Levin, Megan Mahajan, Cara Marcy, Erin Mayfield, James McFarland, Haewon McJeon, Robbie Orvis, Neha Patankar, Kevin Rennert, Christopher Roney, Nicholas Roy, Greg Schivley , et al. (7 additional authors not shown)

Abstract: If goals set under the Paris Agreement are met, the world may hold warming well below 2 C; however, parties are not on track to deliver these commitments, increasing focus on policy implementation to close the gap between ambition and action. Recently, the US government passed its most prominent piece of climate legislation to date, the Inflation Reduction Act of 2022 (IRA), designed to invest in… ▽ More If goals set under the Paris Agreement are met, the world may hold warming well below 2 C; however, parties are not on track to deliver these commitments, increasing focus on policy implementation to close the gap between ambition and action. Recently, the US government passed its most prominent piece of climate legislation to date, the Inflation Reduction Act of 2022 (IRA), designed to invest in a wide range of programs that, among other provisions, incentivize clean energy and carbon management, encourage electrification and efficiency measures, reduce methane emissions, promote domestic supply chains, and address environmental justice concerns. IRA's scope and complexity make modeling important to understand impacts on emissions and energy systems. We leverage results from nine independent, state-of-the-art models to examine potential implications of key IRA provisions, showing economy wide emissions reductions between 43-48% below 2005 by 2035. △ Less

Submitted 3 July, 2023; originally announced July 2023.

Journal ref: Science, 380(6652): 1324-1327 (2023)

First Results for Solar Soft X-ray Irradiance Measurements from the Third Generation Miniature X-Ray Solar Spectrometer

Authors: Thomas N. Woods, Bennet Schwab, Robert Sewell, Anant Kumar Telikicherla Kandala, James Paul Mason, Amir Caspi, Thomas Eden, Amal Chandran, Phillip C. Chamberlin, Andrew R. Jones, Richard Kohnert, Christopher S. Moore, Stanley C. Solomon, Harry Warren

Abstract: Three generations of the Miniature X-ray Solar Spectrometer (MinXSS) have flown on small satellites with the goal "to explore the energy distribution of soft X-ray (SXR) emissions from the quiescent Sun, active regions, and during solar flares, and to model the impact on Earth's ionosphere and thermosphere". The primary science instrument is the Amptek X123 X-ray spectrometer that has improved wit… ▽ More Three generations of the Miniature X-ray Solar Spectrometer (MinXSS) have flown on small satellites with the goal "to explore the energy distribution of soft X-ray (SXR) emissions from the quiescent Sun, active regions, and during solar flares, and to model the impact on Earth's ionosphere and thermosphere". The primary science instrument is the Amptek X123 X-ray spectrometer that has improved with each generation of the MinXSS experiment. This third generation MinXSS-3 has higher energy resolution and larger effective area than its predecessors and is also known as the Dual-zone Aperture X-ray Solar Spectrometer (DAXSS). It was launched on the INSPIRESat-1 satellite on 2022 February 14, and INSPIRESat-1 has successfully completed its 6-month prime mission. The INSPIRESat-1 is in a dawn-dusk, Sun-Synchronous Orbit (SSO) and therefore has 24-hour coverage of the Sun during most of its mission so far. The rise of Solar Cycle 25 (SC-25) has been observed by DAXSS. This paper introduces the INSPIRESat-1 DAXSS solar SXR observations, and we focus the science results here on a solar occultation experiment and multiple flares on 2022 April 24. One key flare result is that the reduction of elemental abundances is greatest during the flare impulsive phase and thus highlighting the important role of chromospheric evaporation during flares to inject warmer plasma into the coronal loops. Furthermore, these results are suggestive that the amount of chromospheric evaporation is related to flare temperature and intensity. △ Less

Submitted 29 July, 2023; v1 submitted 3 July, 2023; originally announced July 2023.

Comments: 44 pages including 19-page Appendix A, 8 figures, 7 tables

Journal ref: The Astrophysical Journal, Vol. 956, Issue 2, 94 (14pp); 2023 October 11

Acceptance tests of Hamamatsu R7081 photomultiplier tubes

Authors: O. A. Akindele, A. Bernstein, S. Boyd, J. Burns, M. Calle, J. Coleman, R. Collins, A. Ezeribe, J. He, G. Holt, K. Jewkes, R. Jones, L. Kneale, P. Lewis, M. Malek, C. Mauger, A. Mitra, F. Muheim, M. Needham, S. Paling, L. Pickard, S. Quillin, J. Rex, P. R. Scovell, T. Shaw , et al. (7 additional authors not shown)

Abstract: Photomultiplier tubes (PMTs) are traditionally an integral part of large underground experiments as they measure the light emission from particle interactions within the enclosed detection media. The BUTTON experiment will utilise around 100 PMTs to measure the response of different media suitable for rare event searches. A subset of low-radioactivity 10-inch Hamamatsu R7081 PMTs were tested, char… ▽ More Photomultiplier tubes (PMTs) are traditionally an integral part of large underground experiments as they measure the light emission from particle interactions within the enclosed detection media. The BUTTON experiment will utilise around 100 PMTs to measure the response of different media suitable for rare event searches. A subset of low-radioactivity 10-inch Hamamatsu R7081 PMTs were tested, characterised, and compared to manufacture certification. This manuscript describes the laboratory tests and analysis of gain, peak-to-valley ratio and dark rate of the PMTs to give an understanding of the charge response, signal-to-noise ratio and dark noise background as an acceptance test of the suitability of these PMTs for water-based detectors. Following the evaluation of these tests, the PMT performance agreed with the manufacturer specifications. These results are imperative for modeling the PMT response in detector simulations and providing confidence in the performance of the devices once installed in the detector underground. △ Less

Submitted 27 July, 2023; v1 submitted 16 June, 2023; originally announced June 2023.

Comments: 11 pages, 11 figures

Small Platforms, High Return: The Need to Enhance Investment in Small Satellites for Focused Science, Career Development, and Improved Equity

Authors: James Paul Mason, Robert G. Begbie, Maitland Bowen, Amir Caspi, Phillip C. Chamberlin, Amal Chandran, Ian Cohen, Edward E. DeLuca, Alfred G. de Wijn, Karin Dissauer, Francis Eparvier, Rachael Filwett, Sarah Gibson, Chris R. Gilly, Vicki Herde, George Ho, George Hospodarsky, Allison Jaynes, Andrew R. Jones, Justin C. Kasper, Rick Kohnert, Zoe Lee, E. I. Mason, Aimee Merkel, Rafael Mesquita , et al. (11 additional authors not shown)

Abstract: In the next decade, there is an opportunity for very high return on investment of relatively small budgets by elevating the priority of smallsat funding in heliophysics. We've learned in the past decade that these missions perform exceptionally well by traditional metrics, e.g., papers/year/\$M (Spence et al. 2022 -- arXiv:2206.02968). It is also well established that there is a "leaky pipeline" r… ▽ More In the next decade, there is an opportunity for very high return on investment of relatively small budgets by elevating the priority of smallsat funding in heliophysics. We've learned in the past decade that these missions perform exceptionally well by traditional metrics, e.g., papers/year/\$M (Spence et al. 2022 -- arXiv:2206.02968). It is also well established that there is a "leaky pipeline" resulting in too little diversity in leadership positions (see the National Academies Report at https://www.nationalacademies.org/our-work/increasing-diversity-in-the-leadership-of-competed-space-missions). Prioritizing smallsat funding would significantly increase the number of opportunities for new leaders to learn -- a crucial patch for the pipeline and an essential phase of career development. At present, however, there are far more proposers than the available funding can support, leading to selection ratios that can be as low as 6% -- in the bottom 0.5th percentile of selection ratios across the history of ROSES. Prioritizing SmallSat funding and substantially increasing that selection ratio are the fundamental recommendations being made by this white paper. △ Less

Submitted 8 June, 2023; originally announced June 2023.

Comments: White paper submitted to the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033; 6 pages, 1 figure

Journal ref: Bulletin of the AAS, Vol. 55, Issue 3, Whitepaper #268 (6pp); 2023 July 31

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

Tailoring data assimilation to discontinuous Galerkin models

Authors: Ivo Pasmans, Yumeng Chen, Alberto Carrassi, Chris K. R. T. Jones

Abstract: During the last few years discontinuous Galerkin (DG) methods have received increased interest from the geophysical community. In these methods the solution in each grid cell is approximated as a linear combination of basis functions. Ensemble data assimilation (EnDA) aims to approximate the true state by combining model outputs with observations using error statistics estimated from an ensemble o… ▽ More During the last few years discontinuous Galerkin (DG) methods have received increased interest from the geophysical community. In these methods the solution in each grid cell is approximated as a linear combination of basis functions. Ensemble data assimilation (EnDA) aims to approximate the true state by combining model outputs with observations using error statistics estimated from an ensemble of model runs. Ensemble data assimilation in geophysical models faces several well-documented issues. In this work we exploit the expansion of the solution in DG basis functions to address some of these issues. Specifically, it is investigated whether a DA-DG combination 1) mitigates the need for observation thinning, 2) reduces errors in the field's gradients, 3) can be used to set up scale-dependent localisation. Numerical experiments are carried out using stochastically generated ensembles of model states, with different noise properties, and with Legendre polynomials as basis functions. It is found that strong reduction in the analysis error is achieved by using DA-DG and that the benefit increases with increasing DG order. This is especially the case when small scales dominate the background error. The DA improvement in the 1st derivative is on the other hand marginal. We think this to be a counter-effect of the power of DG to fit the observations closely, which can deteriorate the estimates of the derivatives. Applying optimal localisation to the different polynomial orders, thus exploiting their different spatial length, is beneficial: it results in a covariance matrix closer to the true covariance than the matrix obtained using traditional optimal localisation in state-space. △ Less

Submitted 4 May, 2023; originally announced May 2023.

Experimental mitigation of large-amplitude transverse gusts via closed-loop pitch control

Authors: Girguis Sedky, Antonios Gementzopoulos, Francis D. Lagor, Anya R. Jones

Abstract: Air vehicles of all scales are susceptible to large-amplitude gusts that may lead to vehicle damage and instability. Therefore, effective physics-based control strategies and an understanding of the dominant unsteady flow physics underpinning gust encounters are desired to improve safety and reliability of flight in these conditions. To this end, this paper develops and experimentally demonstrates… ▽ More Air vehicles of all scales are susceptible to large-amplitude gusts that may lead to vehicle damage and instability. Therefore, effective physics-based control strategies and an understanding of the dominant unsteady flow physics underpinning gust encounters are desired to improve safety and reliability of flight in these conditions. To this end, this paper develops and experimentally demonstrates a proportional output-feedback lift regulation strategy based on the classical unsteady aerodynamic theories of Wagner and Kussner for wings encountering large-amplitude transverse gusts without a priori knowledge of gust strength or onset time. The tested vertical gust velocities ranged between 25% and 71% of the freestream speed. This strategy is found to successfully generalize to gusts of different strengths and directions, as well as wings at pre- and post-stall angles of attack. In addition, this paper applies dynamical systems analysis to Wagner's aerodynamic model to reveal the effect of the pitch-axis location, pitch input, and closed-loop feedback gains on the stability and robustness of the system along with the flow physics responsible. The real-time output feedback control strategy is experimentally tested in a water tow tank facility equipped with a transverse gust generator. Time-resolved force and flow-field measurements are used to discover the salient flow physics during these encounters and illustrate how closed-loop actuation mitigates their lift transients. △ Less

Submitted 25 May, 2023; v1 submitted 6 February, 2023; originally announced February 2023.

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

HIKE, High Intensity Kaon Experiments at the CERN SPS

Authors: E. Cortina Gil, J. Jerhot, N. Lurkin, T. Numao, B. Velghe, V. W. S. Wong, D. Bryman, L. Bician, Z. Hives, T. Husek, K. Kampf, M. Koval, A. T. Akmete, R. Aliberti, V. Büscher, L. Di Lella, N. Doble, L. Peruzzo, M. Schott, H. Wahl, R. Wanke, B. Döbrich, L. Montalto, D. Rinaldi, F. Dettori , et al. (154 additional authors not shown)

Abstract: A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the St… ▽ More A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the Standard Model. The experimental programme is based on a staged approach involving experiments with charged and neutral kaon beams, as well as operation in beam-dump mode. The various phases will rely on a common infrastructure and set of detectors. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: Letter of Intent submitted to CERN SPSC. Address all correspondence to [email protected]

Report number: CERN-SPSC-2022-031/SPSC-I-257

Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1235 additional authors not shown)

Abstract: Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is… ▽ More Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons. △ Less

Submitted 31 May, 2023; v1 submitted 2 November, 2022; originally announced November 2022.

Comments: 19 pages, 10 figures

Report number: FERMILAB-PUB-22-784, CERN-EP-DRAFT-MISC-2022-008

Journal ref: Phys. Rev. D 107, 092012 (2023)

ATHENA Detector Proposal -- A Totally Hermetic Electron Nucleus Apparatus proposed for IP6 at the Electron-Ion Collider

Authors: ATHENA Collaboration, J. Adam, L. Adamczyk, N. Agrawal, C. Aidala, W. Akers, M. Alekseev, M. M. Allen, F. Ameli, A. Angerami, P. Antonioli, N. J. Apadula, A. Aprahamian, W. Armstrong, M. Arratia, J. R. Arrington, A. Asaturyan, E. C. Aschenauer, K. Augsten, S. Aune, K. Bailey, C. Baldanza, M. Bansal, F. Barbosa, L. Barion , et al. (415 additional authors not shown)

Abstract: ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its e… ▽ More ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges. △ Less

Submitted 13 October, 2022; originally announced October 2022.

Journal ref: JINST 17 (2022) 10, P10019

A Method to Achieve High Dynamic Range in a CMOS Image Sensor Using Interleaved Row Readout

Authors: Thomas Wocial, Konstantin D. Stefanov, William E. Martin, John R. Barnes, Hugh R. A. Jones

Abstract: We present a readout scheme for CMOS image sensors that can be used to achieve arbitrarily high dynamic range (HDR) in principle. The linear full well capacity (LFWC) in high signal regions was extended 50 times from 20 ke$^{-}$ to 984 ke$^{-}$ via an interlaced row-wise readout order, whilst the noise floor remained unchanged in low signal regions, resulting in a 34 dB increase in DR. The peak si… ▽ More We present a readout scheme for CMOS image sensors that can be used to achieve arbitrarily high dynamic range (HDR) in principle. The linear full well capacity (LFWC) in high signal regions was extended 50 times from 20 ke$^{-}$ to 984 ke$^{-}$ via an interlaced row-wise readout order, whilst the noise floor remained unchanged in low signal regions, resulting in a 34 dB increase in DR. The peak signal-to-noise ratio (PSNR) is increased in a continuous fashion from 43 dB to 60 dB. This was achieved by summing user-selected rows which were read out multiple times. Centroiding uncertainties were lowered when template-fitting a projected pattern, compared to the standard readout scheme. Example applications are aimed at scientific imaging due to the linearity and PSNR increase. △ Less

Submitted 10 October, 2022; originally announced October 2022.

Comments: 14 pages, 10 figures. Accepted to IEEE Sensors on 14/09/2022, available as a preprint as of 10/10/2022

Automatic Segmentation of the Great Arteries for Computational Hemodynamic Assessment

Authors: Javier Montalt-Tordera, Endrit Pajaziti, Rod Jones, Emilie Sauvage, Rajesh Puranik, Aakansha Ajay Vir Singh, Claudio Capelli, Jennifer Steeden, Silvia Schievano, Vivek Muthurangu

Abstract: Background: Computational fluid dynamics (CFD) is increasingly used to assess blood flow conditions in patients with congenital heart disease (CHD). This requires patient-specific anatomy, usually obtained from segmented 3D cardiovascular magnetic resonance (CMR) images. However, segmentation is time-consuming and needs expert input. This study aims to develop and validate a machine learning (ML)… ▽ More Background: Computational fluid dynamics (CFD) is increasingly used to assess blood flow conditions in patients with congenital heart disease (CHD). This requires patient-specific anatomy, usually obtained from segmented 3D cardiovascular magnetic resonance (CMR) images. However, segmentation is time-consuming and needs expert input. This study aims to develop and validate a machine learning (ML) method for segmentation of the aorta and pulmonary arteries (PAs) for CFD studies. Methods: 90 CHD patients were retrospectively selected for this study. 3D CMR images were manually segmented to obtain ground-truth (GT) background, aorta and PA labels. These were used to train and optimize a U-Net model. Segmentation performance was primarily evaluated using Dice score. CFD simulations were set up from GT and ML segmentations using a semi-automatic meshing and simulation pipeline. Pressure and velocity fields were computed, and a mean average percentage error (MAPE) was calculated for each vessel pair. A secondary observer (SO) segmented the test dataset to assess inter-observer variability. Friedman tests were used to compare segmentation metrics and flow field errors. Results: The model's Dice score (ML vs GT) was 0.945 for the aorta and 0.885 for the PAs. Differences with the inter-observer Dice score (SO vs GT) and ML vs SO Dice scores were not statistically significant for either aorta or PAs. The ML vs GT MAPEs for pressure and velocity in the aorta were 10.1% and 4.1% respectively, and for the PAs 14.6% and 6.3%, respectively. Inter-observer (SO vs GT) and ML vs SO pressure and velocity MAPEs were of a similar magnitude to ML vs GT. Conclusions: The proposed method can successfully segment the great vessels for CFD, with errors similar to inter-observer variability. This reduces the time and effort needed for CFD analysis, making it more attractive for routine clinical use. △ Less

Submitted 13 September, 2022; originally announced September 2022.

Comments: 27 pages, 10 figures

Attochemistry Regulation of Charge Migration

Authors: Aderonke S. Folorunso, François Mauger, Kyle A. Hamer, Denawakage D Jayasinghe, Imam Wahyutama, Justin R. Ragains, Robert R. Jones, Louis F. DiMauro, Mette B. Gaarde, Kenneth J. Schafer, Kenneth Lopata

Abstract: Charge migration (CM) is a coherent attosecond process that involves the movement of localized holes across a molecule. To determine the relationship between a molecule's structure and the CM dynamics it exhibits, we perform systematic studies of para-functionalized bromobenzene molecules (X-C$_6$H$_4$-R) using real-time time-dependent density functional theory. We initiate valence-electron dynami… ▽ More Charge migration (CM) is a coherent attosecond process that involves the movement of localized holes across a molecule. To determine the relationship between a molecule's structure and the CM dynamics it exhibits, we perform systematic studies of para-functionalized bromobenzene molecules (X-C$_6$H$_4$-R) using real-time time-dependent density functional theory. We initiate valence-electron dynamics by emulating rapid strong-field ionization leading to a localized hole on the bromine atom. The resulting CM, which takes on the order of 1 fs, occurs via an X localized to C$_6$H$_4$ delocalized to R localized mechanism. Interestingly, the hole contrast on the acceptor functional group increases with increasing electron donating strength. This trend is well-described by the Hammett sigma value of the group, which is a commonly used metric for quantifying the effect of functionalization on the chemical reactivity of benzene derivatives. These results suggest that simple attochemistry principles and a density-based picture can be used to predict and understand CM. △ Less

Submitted 12 July, 2022; originally announced July 2022.

Comments: 5 pages, 3 figures

A Database for Reduced-Complexity Modeling of Fluid Flows

Authors: Aaron Towne, Scott T. M. Dawson, Guillaume A. Brès, Adrián Lozano-Durán, Theresa Saxton-Fox, Aadhy Parthasarathy, Anya R. Jones, Hulya Biler, Chi-An Yeh, Het D. Patel, Kunihiko Taira

Abstract: We present a publicly accessible database designed to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. Availability of high-quality flow data is essential for all of these aspects of model development for both data-driven and physics-based methods. The database contains time-resolved data for six distinct datasets: a large… ▽ More We present a publicly accessible database designed to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. Availability of high-quality flow data is essential for all of these aspects of model development for both data-driven and physics-based methods. The database contains time-resolved data for six distinct datasets: a large eddy simulation of a turbulent jet, direct numerical simulations of a zero-pressure-gradient turbulent boundary layer, particle-image-velocimetry measurements for the same boundary layer at several Reynolds numbers, direct numerical simulations of laminar stationary and pitching flat-plate airfoils, particle-image-velocimetry and force measurements of an airfoil encountering a gust, and a large eddy simulation of the separated, turbulent flow over an airfoil. These six cases span several key flow categories: laminar and turbulent, statistically stationary and transient, tonal and broadband spectral content, canonical and application-oriented, wall-bounded and free-shear flow, and simulation and experimental measurements. For each dataset, we describe the flow setup and computational/experimental methods, catalog the data available in the database, and provide examples of how these data can be used for reduced-complexity modeling. All data can be downloaded using a browser interface or Globus. Our vision is that the common testbed provided by this database will aid the fluid mechanics community in clarifying the distinct capabilities of new and existing methods. △ Less

Submitted 23 June, 2022; originally announced June 2022.

Performance of the LHCb RICH detectors during LHC Run 2

Authors: R. Calabrese, M. Fiorini, E. Luppi, L. Minzoni, I. Slazyk, L. Tomassetti, M. Bartolini, R. Cardinale, F. Fontanelli, A. Petrolini, A. Pistone, M. Calvi, C. Matteuzzi, A. Lupato, G. Simi, M. Kucharczyk, B. Malecki, M. Witek, S. Benson, M. Blago, G. Cavallero, A. Contu, C. D'Ambrosio, C. Frei, T. Gys , et al. (57 additional authors not shown)

Abstract: The performance of the ring-imaging Cherenkov detectors at the LHCb experiment is determined during the LHC Run 2 period between 2015 and 2018. The stability of the Cherenkov angle resolution and number of detected photons with time and running conditions is measured. The particle identification performance is evaluated with data and found to satisfy the requirements of the physics programme. The performance of the ring-imaging Cherenkov detectors at the LHCb experiment is determined during the LHC Run 2 period between 2015 and 2018. The stability of the Cherenkov angle resolution and number of detected photons with time and running conditions is measured. The particle identification performance is evaluated with data and found to satisfy the requirements of the physics programme. △ Less

Submitted 26 May, 2022; originally announced May 2022.

Report number: LHCb-DP-2021-004

Particle Physics Outreach at Non-traditional Venues

Authors: Jim Cochran, John Huth, Roger Jones, Paul Laycock, Claire Lee, Lawrence Lee, Connie Potter, Gordon Watts

Abstract: Since 2016 the group known as `The Big Bang Collective' has brought High Energy Physics outreach to music and culture festivals across Europe, successfully engaging with and inspiring audiences who may never have sought this out themselves through activities in their `Physics Pavilions'. The US has a very long, glorious tradition of music festivals, and an incredible community of sci-comm engaged… ▽ More Since 2016 the group known as `The Big Bang Collective' has brought High Energy Physics outreach to music and culture festivals across Europe, successfully engaging with and inspiring audiences who may never have sought this out themselves through activities in their `Physics Pavilions'. The US has a very long, glorious tradition of music festivals, and an incredible community of sci-comm engaged physicists, from students to senior staff. With the experience already gained in Europe, The Big Bang Collective believes the time is now ripe to bring their Physics Pavilions to US music festivals. △ Less

Submitted 17 March, 2022; originally announced March 2022.

Comments: 5 pages, 2 figures, contribution to Snowmass 2021

White Paper on Light Sterile Neutrino Searches and Related Phenomenology

Authors: M. A. Acero, C. A. Argüelles, M. Hostert, D. Kalra, G. Karagiorgi, K. J. Kelly, B. Littlejohn, P. Machado, W. Pettus, M. Toups, M. Ross-Lonergan, A. Sousa, P. T. Surukuchi, Y. Y. Y. Wong, W. Abdallah, A. M. Abdullahi, R. Akutsu, L. Alvarez-Ruso, D. S. M. Alves, A. Aurisano, A. B. Balantekin, J. M. Berryman, T. Bertólez-Martínez, J. Brunner, M. Blennow , et al. (147 additional authors not shown)

Abstract: This white paper provides a comprehensive review of our present understanding of experimental neutrino anomalies that remain unresolved, charting the progress achieved over the last decade at the experimental and phenomenological level, and sets the stage for future programmatic prospects in addressing those anomalies. It is purposed to serve as a guiding and motivational "encyclopedic" reference,… ▽ More This white paper provides a comprehensive review of our present understanding of experimental neutrino anomalies that remain unresolved, charting the progress achieved over the last decade at the experimental and phenomenological level, and sets the stage for future programmatic prospects in addressing those anomalies. It is purposed to serve as a guiding and motivational "encyclopedic" reference, with emphasis on needs and options for future exploration that may lead to the ultimate resolution of the anomalies. We see the main experimental, analysis, and theory-driven thrusts that will be essential to achieving this goal being: 1) Cover all anomaly sectors -- given the unresolved nature of all four canonical anomalies, it is imperative to support all pillars of a diverse experimental portfolio, source, reactor, decay-at-rest, decay-in-flight, and other methods/sources, to provide complementary probes of and increased precision for new physics explanations; 2) Pursue diverse signatures -- it is imperative that experiments make design and analysis choices that maximize sensitivity to as broad an array of these potential new physics signatures as possible; 3) Deepen theoretical engagement -- priority in the theory community should be placed on development of standard and beyond standard models relevant to all four short-baseline anomalies and the development of tools for efficient tests of these models with existing and future experimental datasets; 4) Openly share data -- Fluid communication between the experimental and theory communities will be required, which implies that both experimental data releases and theoretical calculations should be publicly available; and 5) Apply robust analysis techniques -- Appropriate statistical treatment is crucial to assess the compatibility of data sets within the context of any given model. △ Less

Submitted 17 May, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021 by the NF02 Topical Group (Understanding Experimental Neutrino Anomalies). Submitted to J. Phys. G as a Major Report

Low-Energy Physics in Neutrino LArTPCs

Authors: D. Caratelli, W. Foreman, A. Friedland, S. Gardiner, I. Gil-Botella, G. Karagiorgi, M. Kirby, G. Lehmann Miotto, B. R. Littlejohn, M. Mooney, J. Reichenbacher, A. Sousa, K. Scholberg, J. Yu, T. Yang, S. Andringa, J. Asaadi, T. J. C. Bezerra, F. Capozzi, F. Cavanna, E. Church, A. Himmel, T. Junk, J. Klein, I. Lepetic , et al. (264 additional authors not shown)

Abstract: In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below… ▽ More In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below the few tens of MeV range. 2) Low-energy signatures are an integral part of GeV-scale accelerator neutrino interaction final states, and their reconstruction can enhance the oscillation physics sensitivities of LArTPC experiments. 3) BSM signals from accelerator and natural sources also generate diverse signatures in the low-energy range, and reconstruction of these signatures can increase the breadth of BSM scenarios accessible in LArTPC-based searches. 4) Neutrino interaction cross sections and other nuclear physics processes in argon relevant to sub-hundred-MeV LArTPC signatures are poorly understood. Improved theory and experimental measurements are needed. Pion decay-at-rest sources and charged particle and neutron test beams are ideal facilities for experimentally improving this understanding. 5) There are specific calibration needs in the low-energy range, as well as specific needs for control and understanding of radiological and cosmogenic backgrounds. 6) Novel ideas for future LArTPC technology that enhance low-energy capabilities should be explored. These include novel charge enhancement and readout systems, enhanced photon detection, low radioactivity argon, and xenon do**. 7) Low-energy signatures, whether steady-state or part of a supernova burst or larger GeV-scale event topology, have specific triggering, DAQ and reconstruction requirements that must be addressed outside the scope of conventional GeV-scale data collection and analysis pathways. △ Less

Submitted 1 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Benchmark problems for transcranial ultrasound simulation: Intercomparison of compressional wave models

Authors: Jean-Francois Aubry, Oscar Bates, Christian Boehm, Kim Butts Pauly, Douglas Christensen, Carlos Cueto, Pierre Gelat, Lluis Guasch, Jiri Jaros, Yun **g, Rebecca Jones, Ningrui Li, Patrick Marty, Hazael Montanaro, Esra Neufeld, Samuel Pichardo, Gianmarco Pinton, Aki Pulkkinen, Antonio Stanziola, Axel Thielscher, Bradley Treeby, Elwin van 't Wout

Abstract: Computational models of acoustic wave propagation are frequently used in transcranial ultrasound therapy, for example, to calculate the intracranial pressure field or to calculate phase delays to correct for skull distortions. To allow intercomparison between the different modeling tools and techniques used by the community, an international working group was convened to formulate a set of numeric… ▽ More Computational models of acoustic wave propagation are frequently used in transcranial ultrasound therapy, for example, to calculate the intracranial pressure field or to calculate phase delays to correct for skull distortions. To allow intercomparison between the different modeling tools and techniques used by the community, an international working group was convened to formulate a set of numerical benchmarks. Here, these benchmarks are presented, along with intercomparison results. Nine different benchmarks of increasing geometric complexity are defined. These include a single-layer planar bone immersed in water, a multi-layer bone, and a whole skull. Two transducer configurations are considered (a focused bowl and a plane piston), giving a total of 18 permutations of the benchmarks. Eleven different modeling tools are used to compute the benchmark results. The models span a wide range of numerical techniques, including the finite-difference time-domain method, angular-spectrum method, pseudospectral method, boundary-element method, and spectral-element method. Good agreement is found between the models, particularly for the position, size, and magnitude of the acoustic focus within the skull. When comparing results for each model with every other model in a cross comparison, the median values for each benchmark for the difference in focal pressure and position are less than 10\% and 1 mm, respectively. The benchmark definitions, model results, and intercomparison codes are freely available to facilitate further comparisons. △ Less

Submitted 9 February, 2022; originally announced February 2022.

Comments: 18 pages, 7 figures

Characterizing Particle-Like Charge Migration Dynamics with High-Harmonic Sideband Spectroscopy

Authors: Kyle A. Hamer, Francois Mauger, Aderonke S. Folorunso, Kenneth Lopata, Robert R. Jones, Louis F. DiMauro, Kenneth J. Schafer, Mette B. Gaarde

Abstract: We introduce high-harmonic sideband spectroscopy (HHSS) and show that it can be a robust probe of attosecond charge migration (CM) in a halogenated carbon-chain molecule. We simulate both the CM and harmonic-generation (HHG) dynamics using ab initio time-dependent density-functional theory. We find that CM dynamics initiated along the molecular backbone induces sidebands in the HHG spectrum driven… ▽ More We introduce high-harmonic sideband spectroscopy (HHSS) and show that it can be a robust probe of attosecond charge migration (CM) in a halogenated carbon-chain molecule. We simulate both the CM and harmonic-generation (HHG) dynamics using ab initio time-dependent density-functional theory. We find that CM dynamics initiated along the molecular backbone induces sidebands in the HHG spectrum driven by a delayed laser pulse that is polarized perpendicular to the molecular axis. Monitoring the spectrum as either the HHG laser frequency or the relative delay is scanned allows for the extraction of detailed information about the time-domain characteristics of the CM process. △ Less

Submitted 12 May, 2022; v1 submitted 1 February, 2022; originally announced February 2022.

Comments: 8 pages, 7 figures

Journal ref: Physical Review A 106, 013103 (2022)

A heteroencoder architecture for prediction of failure locations in porous metals using variational inference

Authors: Wyatt Bridgman, Xiaoxuan Zhang, Greg Teichert, Mohammad Khalil, Krishna Garikipati, Reese Jones

Abstract: In this work we employ an encoder-decoder convolutional neural network to predict the failure locations of porous metal tension specimens based only on their initial porosities. The process we model is complex, with a progression from initial void nucleation, to saturation, and ultimately failure. The objective of predicting failure locations presents an extreme case of class imbalance since most… ▽ More In this work we employ an encoder-decoder convolutional neural network to predict the failure locations of porous metal tension specimens based only on their initial porosities. The process we model is complex, with a progression from initial void nucleation, to saturation, and ultimately failure. The objective of predicting failure locations presents an extreme case of class imbalance since most of the material in the specimens do not fail. In response to this challenge, we develop and demonstrate the effectiveness of data- and loss-based regularization methods. Since there is considerable sensitivity of the failure location to the particular configuration of voids, we also use variational inference to provide uncertainties for the neural network predictions. We connect the deterministic and Bayesian convolutional neural networks at a theoretical level to explain how variational inference regularizes the training and predictions. We demonstrate that the resulting predicted variances are effective in ranking the locations that are most likely to fail in any given specimen. △ Less

Submitted 31 January, 2022; originally announced February 2022.

Comments: 40 pages, 12 figures

A neural ordinary differential equation framework for modeling inelastic stress response via internal state variables

Authors: R. E. Jones, A. L. Frankel, K. L. Johnson

Abstract: We propose a neural network framework to preclude the need to define or observe incompletely or inaccurately defined states of a material in order to describe its response. The neural network design is based on the classical Coleman-Gurtin internal state variable theory. In the proposed framework the states of the material are inferred from observable deformation and stress. A neural network descr… ▽ More We propose a neural network framework to preclude the need to define or observe incompletely or inaccurately defined states of a material in order to describe its response. The neural network design is based on the classical Coleman-Gurtin internal state variable theory. In the proposed framework the states of the material are inferred from observable deformation and stress. A neural network describes the flow of internal states and another represents the map from internal state and strain to stress. We investigate tensor basis, component, and potential-based formulations of the stress model. Violations of the second law of thermodynamics are prevented by a constraint on the weights of the neural network. We extend this framework to homogenization of materials with microstructure with a graph-based convolutional neural network that preprocesses the initial microstructure into salient features. The modeling framework is tested on large datasets spanning inelastic material classes to demonstrate its general applicability. △ Less

Submitted 29 November, 2021; originally announced November 2021.

Comments: 46 pages, 16 figures

Proposed large scale monolithic fused silica mirror suspension for 3rd generation gravitational wave detectors

Authors: A. V. Cumming, R. Jones, G. D. Hammond, J. Hough, I. W. Martin, S. Rowan

Abstract: Thermal noise from the suspension fibres used in the mirror pendulums in current gravitational wave detectors is a critical noise source. Future detectors will require improved suspension performance with the specific ability to suspend much heavier masses to reduce radiation pressure noise, whilst retaining good thermal noise performance. In this letter, we propose and experimentally demonstrate… ▽ More Thermal noise from the suspension fibres used in the mirror pendulums in current gravitational wave detectors is a critical noise source. Future detectors will require improved suspension performance with the specific ability to suspend much heavier masses to reduce radiation pressure noise, whilst retaining good thermal noise performance. In this letter, we propose and experimentally demonstrate a design for a large-scale fused silica suspension, demonstrating its suitability for holding an increased mass of 160 kg. We demonstrate the concepts for improving thermal noise via longer suspension fibres supporting a higher static stress. We present a full thermal noise analysis of our prototype, meeting requirements for conceptual 3rd generation detector designs such as the high frequency interferometer of the Einstein Telescope (ET-HF), and closely approaching that required for Cosmic Explorer (CE). △ Less

Submitted 17 November, 2021; originally announced November 2021.

Comments: 7 pages, 5 figures

LEGEND-1000 Preconceptual Design Report

Authors: LEGEND Collaboration, N. Abgrall, I. Abt, M. Agostini, A. Alexander, C. Andreoiu, G. R. Araujo, F. T. Avignone III, W. Bae, A. Bakalyarov, M. Balata, M. Bantel, I. Barabanov, A. S. Barabash, P. S. Barbeau, C. J. Barton, P. J. Barton, L. Baudis, C. Bauer, E. Bernieri, L. Bezrukov, K. H. Bhimani, V. Biancacci, E. Blalock, A. Bolozdynya , et al. (239 additional authors not shown)

Abstract: We propose the construction of LEGEND-1000, the ton-scale Large Enriched Germanium Experiment for Neutrinoless $ββ$ Decay. This international experiment is designed to answer one of the highest priority questions in fundamental physics. It consists of 1000 kg of Ge detectors enriched to more than 90% in the $^{76}$Ge isotope operated in a liquid argon active shield at a deep underground laboratory… ▽ More We propose the construction of LEGEND-1000, the ton-scale Large Enriched Germanium Experiment for Neutrinoless $ββ$ Decay. This international experiment is designed to answer one of the highest priority questions in fundamental physics. It consists of 1000 kg of Ge detectors enriched to more than 90% in the $^{76}$Ge isotope operated in a liquid argon active shield at a deep underground laboratory. By combining the lowest background levels with the best energy resolution in the field, LEGEND-1000 will perform a quasi-background-free search and can make an unambiguous discovery of neutrinoless double-beta decay with just a handful of counts at the decay $Q$ value. The experiment is designed to probe this decay with a 99.7%-CL discovery sensitivity in the $^{76}$Ge half-life of $1.3\times10^{28}$ years, corresponding to an effective Majorana mass upper limit in the range of 9-21 meV, to cover the inverted-ordering neutrino mass scale with 10 yr of live time. △ Less

Submitted 23 July, 2021; originally announced July 2021.

Laser-induced electron emission from Au nanowires: A probe for orthogonal polarizations

Authors: Eric R. Jones, Wayne Cheng-Wei Huang, Gobind Basnet, Bret N. Flanders, Herman Batelaan

Abstract: Photoelectron field emission, induced by femtosecond laser pulses focused on metallic nanotips, provides spatially coherent and temporally short electron pulses. The properties of the photoelectron yield give insight into both the material properties of the nanostructure and the exciting laser focus. Ultralong nanoribbons, grown as a single crystal attached to a metallic taper, are sources of elec… ▽ More Photoelectron field emission, induced by femtosecond laser pulses focused on metallic nanotips, provides spatially coherent and temporally short electron pulses. The properties of the photoelectron yield give insight into both the material properties of the nanostructure and the exciting laser focus. Ultralong nanoribbons, grown as a single crystal attached to a metallic taper, are sources of electron field emission that have not yet been characterized. In this report, photoemission from gold nanoribbon samples is studied and compared to emission from tungsten and gold tips. We observe that the emission from sharp tips generally depends on one transverse component of the exciting laser field, while the emission of a blunted nanoribbon is found to be sensitive to both components. We propose that this property makes photoemission from nanoribbons a candidate for position-sensitive detection of the longitudinal field component in a tightly focused beam. △ Less

Submitted 14 May, 2021; originally announced May 2021.

Journal ref: Appl. Phys. Lett. 112, 263104 (2018)

A Comparison of CPU and GPU implementations for the LHCb Experiment Run 3 Trigger

Authors: R. Aaij, M. Adinolfi, S. Aiola, S. Akar, J. Albrecht, M. Alexander, S. Amato, Y. Amhis, F. Archilli, M. Bala, G. Bassi, L. Bian, M. P. Blago, T. Boettcher, A. Boldyrev, S. Borghi, A. Brea Rodriguez, L. Calefice, M. Calvo Gomez, D. H. Cámpora Pérez, A. Cardini, M. Cattaneo, V. Chobanova, G. Ciezarek, X. Cid Vidal , et al. (135 additional authors not shown)

Abstract: The LHCb experiment at CERN is undergoing an upgrade in preparation for the Run 3 data taking period of the LHC. As part of this upgrade the trigger is moving to a fully software implementation operating at the LHC bunch crossing rate. We present an evaluation of a CPU-based and a GPU-based implementation of the first stage of the High Level Trigger. After a detailed comparison both options are fo… ▽ More The LHCb experiment at CERN is undergoing an upgrade in preparation for the Run 3 data taking period of the LHC. As part of this upgrade the trigger is moving to a fully software implementation operating at the LHC bunch crossing rate. We present an evaluation of a CPU-based and a GPU-based implementation of the first stage of the High Level Trigger. After a detailed comparison both options are found to be viable. This document summarizes the performance and implementation details of these options, the outcome of which has led to the choice of the GPU-based implementation as the baseline. △ Less

Submitted 4 January, 2022; v1 submitted 9 May, 2021; originally announced May 2021.

Comments: 30 pages, 15 figures, 8 tables

Report number: LHCb-DP-2021-003

Journal ref: Computing Software for Big Science 6, Article number: 1 (2022)

Sensitivity of void mediated failure to geometric design features of porous metals

Authors: Gregory H. Teichert, Mohammad Khalil, Coleman Alleman, Krishna Garikipati, Reese E. Jones

Abstract: Material produced by current metal additive manufacturing processes is susceptible to variable performance due to imprecise control of internal porosity, surface roughness, and conformity to designed geometry. Using a double U-notched specimen, we investigate the interplay of nominal geometry and porosity in determining ductile failure characteristics during monotonic tensile loading. We simulate… ▽ More Material produced by current metal additive manufacturing processes is susceptible to variable performance due to imprecise control of internal porosity, surface roughness, and conformity to designed geometry. Using a double U-notched specimen, we investigate the interplay of nominal geometry and porosity in determining ductile failure characteristics during monotonic tensile loading. We simulate the effects of distributed porosity on plasticity and damage using a statistical model based on populations of pores visible in computed tomography scans and additional sub-threshold voids required to match experimental observations of deformation and failure. We interpret the simulation results from a physical viewpoint and provide statistical models of the probability of failure near stress concentrations. We provide guidance for designs where material defects could cause unexpected failures depending on the relative importance of these defects with respect to features of the nominal geometry. △ Less

Submitted 29 April, 2021; originally announced April 2021.

Cosmic Background Removal with Deep Neural Networks in SBND

Authors: SBND Collaboration, R. Acciarri, C. Adams, C. Andreopoulos, J. Asaadi, M. Babicz, C. Backhouse, W. Badgett, L. Bagby, D. Barker, V. Basque, M. C. Q. Bazetto, M. Betancourt, A. Bhanderi, A. Bhat, C. Bonifazi, D. Brailsford, A. G. Brandt, T. Brooks, M. F. Carneiro, Y. Chen, H. Chen, G. Chisnall, J. I. Crespo-Anadón, E. Cristaldo , et al. (106 additional authors not shown)

Abstract: In liquid argon time projection chambers exposed to neutrino beams and running on or near surface levels, cosmic muons and other cosmic particles are incident on the detectors while a single neutrino-induced event is being recorded. In practice, this means that data from surface liquid argon time projection chambers will be dominated by cosmic particles, both as a source of event triggers and as t… ▽ More In liquid argon time projection chambers exposed to neutrino beams and running on or near surface levels, cosmic muons and other cosmic particles are incident on the detectors while a single neutrino-induced event is being recorded. In practice, this means that data from surface liquid argon time projection chambers will be dominated by cosmic particles, both as a source of event triggers and as the majority of the particle count in true neutrino-triggered events. In this work, we demonstrate a novel application of deep learning techniques to remove these background particles by applying semantic segmentation on full detector images from the SBND detector, the near detector in the Fermilab Short-Baseline Neutrino Program. We use this technique to identify, at single image-pixel level, whether recorded activity originated from cosmic particles or neutrino interactions. △ Less

Submitted 19 April, 2021; v1 submitted 2 December, 2020; originally announced December 2020.

A primary electron beam facility at CERN -- eSPS Conceptual design report

Authors: M. Aicheler, T. Akesson, F. Antoniou, A. Arnalich, P. A. Arrutia Sota, P. Bettencourt Moniz Cabral, D. Bozzini, M. Brugger, O. Brunner, P. N. Burrows, R. Calaga, M. J. Capstick, R. Corsini, S. Doebert, L. A. Dougherty, Y. Dutheil, L. A. Dyks, O. Etisken, L. Evans, A. Farricker, R. Fernandez Ortega, M. A. Fraser, J. Gall, S. J. Gessner, B. Goddard , et al. (30 additional authors not shown)

Abstract: The design of a primary electron beam facility at CERN is described. The study has been carried out within the framework of the wider Physics Beyond Colliders study. It re-enables the Super Proton Synchrotron (SPS) as an electron accelerator, and leverages the development invested in Compact Linear Collider (CLIC) technology for its injector and as an accelerator research and development infrastru… ▽ More The design of a primary electron beam facility at CERN is described. The study has been carried out within the framework of the wider Physics Beyond Colliders study. It re-enables the Super Proton Synchrotron (SPS) as an electron accelerator, and leverages the development invested in Compact Linear Collider (CLIC) technology for its injector and as an accelerator research and development infrastructure. The facility would be relevant for several of the key priorities in the 2020 update of the European Strategy for Particle Physics, such as an electron-positron Higgs factory, accelerator R\&D, dark sector physics, and neutrino physics. In addition, it could serve experiments in nuclear physics. The electron beam delivered by this facility would provide access to light dark matter production significantly beyond the targets predicted by a thermal dark matter origin, and for natures of dark matter particles that are not accessible by direct detection experiments. It would also enable electro-nuclear measurements crucial for precise modelling the energy dependence of neutrino-nucleus interactions, which is needed to precisely measure neutrino oscillations as a function of energy. The implementation of the facility is the natural next step in the development of X-band high-gradient acceleration technology, a key technology for compact and cost-effective electron/positron linacs. It would also become the only facility with multi-GeV drive bunches and truly independent electron witness bunches for plasma wakefield acceleration. A second phase capable to deliver positron witness bunches would make it a complete facility for plasma wakefield collider studies. [...] △ Less

Submitted 21 December, 2020; v1 submitted 15 September, 2020; originally announced September 2020.

Predictive and retrospective modelling of airborne infection risk using monitored carbon dioxide

Authors: Henry C. Burridge, Shiwei Fan, Roderic L. Jones, Catherine J. Noakes, P. F. Linden

Abstract: The risk of long range, herein `airborne', infection needs to be better understood and is especially urgent during the current COVID-19 pandemic. We present a method to determine the relative risk of airborne transmission that can be readily deployed with either modelled or monitored CO$_2$ data and occupancy levels within an indoor space. For spaces regularly, or consistently, occupied by the sam… ▽ More The risk of long range, herein `airborne', infection needs to be better understood and is especially urgent during the current COVID-19 pandemic. We present a method to determine the relative risk of airborne transmission that can be readily deployed with either modelled or monitored CO$_2$ data and occupancy levels within an indoor space. For spaces regularly, or consistently, occupied by the same group of people, e.g. an open-plan office or a school classroom, we establish protocols to assess the absolute risk of airborne infection of this regular attendance at work or school. We present a methodology to easily calculate the expected number of secondary infections arising from a regular attendee becoming infectious and remaining pre/asymptomatic within these spaces. We demonstrate our model by calculating risks for both a modelled open-plan office and by using monitored data recorded within a small naturally ventilated office. In addition, by inferring ventilation rates from monitored CO$_2$ we show that estimates of airborne infection can be accurately reconstructed; thereby offering scope for more informed retrospective modelling should outbreaks occur in spaces where CO$_2$ is monitored. Our modelling suggests that regular attendance at an office for work is unlikely to significantly contribute to the pandemic but only if relatively quiet desk-based work is carried out in the presence of adequate ventilation (i.e. at least 10\,l/s/p following UK guidance), appropriate hygiene controls, distancing measures, and that all commuting presents minimal infection risk. Crucially, modelling even moderate changes to the conditions within the office, or basing estimates for the infectivity of the SARS-CoV-2 variant B1.1.7 current data, typically results in the prediction that for a single infector within the office the airborne route alone gives rises to more than one secondary infection. △ Less

Submitted 22 February, 2021; v1 submitted 7 September, 2020; originally announced September 2020.

Comments: Submitted to Indoor Air for review: 43 pages, 6 figures

Magmatic channelisation by reactive and shear-driven instabilities at mid-ocean ridges: a combined analysis

Authors: David W. Rees Jones, Hanwen Zhang, Richard F. Katz

Abstract: It is generally accepted that melt extraction from the mantle at mid-ocean ridges (MORs) is concentrated in narrow regions of elevated melt fraction called channels. Two feedback mechanisms have been proposed to explain why these channels grow by linear instability: shear flow of partially molten mantle and reactive flow of the ascending magma. These two mechanisms have been studied extensively, i… ▽ More It is generally accepted that melt extraction from the mantle at mid-ocean ridges (MORs) is concentrated in narrow regions of elevated melt fraction called channels. Two feedback mechanisms have been proposed to explain why these channels grow by linear instability: shear flow of partially molten mantle and reactive flow of the ascending magma. These two mechanisms have been studied extensively, in isolation from each other, through theory and laboratory experiments as well as field and geophysical observations. Here, we develop a consistent theory that accounts for both proposed mechanisms and allows us to weigh their relative contributions. We show that interaction of the two feedback mechanisms is insignificant and that the total linear growth rate of channels is well-approximated by summing their independent growth rates. Furthermore, we explain how their competition is governed by the orientation of channels with respect to gravity and mantle shear. By itself, analysis of the reaction-infiltration instability predicts the formation of tube-shaped channels. We show that with the addition of even a small amount of extension in the horizontal, the combined instability favours tabular channels, consistent with the observed morphology of dunite bodies in ophiolites. We apply the new theory to MORs by calculating the accumulated growth and rotation of channels along streamlines of the solid flow. We show that reactive flow is the dominant mechanism deep beneath the ridge axis, where the most unstable orientation of high-porosity channels is sub-vertical. Channels are then rotated by the solid flow away from the vertical. The contribution of the shear-driven instability is confined to the margins of the melting region. Within the limitations of our study, the shear-driven feedback is not responsible for significant melt focusing or for shallowly dip** seismic anisotropy [abridged]. △ Less

Submitted 7 May, 2021; v1 submitted 31 August, 2020; originally announced August 2020.

Comments: [32 pages, 17 figures.] This is a pre-copyedited, author-produced PDF of an article accepted for publication in Geophysical Journal International following peer review. The version of record is available online at https://doi.org/10.1093/gji/ggab112

Journal ref: Geophysical Journal International, Volume 226, Issue 1, July 2021, Pages 582-609

Significant reduced traffic in Bei**g failed to relieve haze pollution during the COVID-19 lockdown: implications for haze mitigation

Authors: Zhaofeng Lv, Xiaotong Wang, Fanyuan Deng, Qi Ying, Alexander T. Archibald, Roderic L. Jones, Yan Ding, Ying Cheng, Mingliang Fu, Ying Liu, Hanyang Man, Zhigang Xue, Kebin He, Jiming Hao, Huan Liu

Abstract: The COVID-19 outbreak greatly limited human activities and reduced primary emissions particularly from urban on-road vehicles, but coincided with Bei**g experiencing pandemic haze, raising the public concerns of the validity and effectiveness of the imposed traffic policies to improve the air pollution. Here, we explored the relationship between local vehicle emissions and the winter haze in Beij… ▽ More The COVID-19 outbreak greatly limited human activities and reduced primary emissions particularly from urban on-road vehicles, but coincided with Bei**g experiencing pandemic haze, raising the public concerns of the validity and effectiveness of the imposed traffic policies to improve the air pollution. Here, we explored the relationship between local vehicle emissions and the winter haze in Bei**g before and during the COVID-19 lockdown period based on an integrated analysis framework, which combines a real-time on-road emission inventory, in-situ air quality observations and a localized chemical transport modeling system. We found that traffic emissions decreased substantially affected by the pandemic, with a higher reduction for NOx (75.9%, 125.3 Mg/day) compared to VOCs (53.1%, 52.9 Mg/day). Unexpectedly, our results show that the imbalanced emission abatement of NOx and VOCs from vehicles led to a significant rise of the atmospheric oxidizing capacity in urban areas, but only resulting in modest increases in secondary aerosols due to the inadequate precursors. However, the enhanced oxidizing capacity in the surrounding regions greatly increased the secondary particles with relatively abundant precursors, which is mainly responsible for Bei**g haze during the lockdown period. Our results indicate that the winter haze in Bei**g was insensitive to the local vehicular emissions reduction due to the complicated nonlinear response of the fine particle and air pollutant emissions. We suggest mitigation policies should focus on accelerating VOC and NH3 emissions reduction and synchronously controlling regional sources to release the benefits on local traffic emission control. △ Less

Submitted 12 June, 2020; originally announced June 2020.

Comments: 52 pages, 24 figures, 4 tables

Beam Diagnostics EXamples from High Energy Colliders

Authors: Rhodri Jones

Abstract: This chapter takes a look at how beam diagnostic systems can be used to commission, optimise and solve issues on high energy colliders. This chapter takes a look at how beam diagnostic systems can be used to commission, optimise and solve issues on high energy colliders. △ Less

Submitted 2 June, 2020; originally announced June 2020.

Comments: 18 pages, 41 figures

Report number: Proceedings of the 2018 CERN-Accelerator-School course on Beam Instrumentation, Tuusula, (Finland)

The GlueX Beamline and Detector

Authors: S. Adhikari, C. S. Akondi, H. Al Ghoul, A. Ali, M. Amaryan, E. G. Anassontzis, A. Austregesilo, F. Barbosa, J. Barlow, A. Barnes, E. Barriga, R. Barsotti, T. D. Beattie, J. Benesch, V. V. Berdnikov, G. Biallas, T. Black, W. Boeglin, P. Brindza, W. J. Briscoe, T. Britton, J. Brock, W. K. Brooks, B. E. Cannon, C. Carlin , et al. (165 additional authors not shown)

Abstract: The GlueX experiment at Jefferson Lab has been designed to study photoproduction reactions with a 9-GeV linearly polarized photon beam. The energy and arrival time of beam photons are tagged using a scintillator hodoscope and a scintillating fiber array. The photon flux is determined using a pair spectrometer, while the linear polarization of the photon beam is determined using a polarimeter based… ▽ More The GlueX experiment at Jefferson Lab has been designed to study photoproduction reactions with a 9-GeV linearly polarized photon beam. The energy and arrival time of beam photons are tagged using a scintillator hodoscope and a scintillating fiber array. The photon flux is determined using a pair spectrometer, while the linear polarization of the photon beam is determined using a polarimeter based on triplet photoproduction. Charged-particle tracks from interactions in the central target are analyzed in a solenoidal field using a central straw-tube drift chamber and six packages of planar chambers with cathode strips and drift wires. Electromagnetic showers are reconstructed in a cylindrical scintillating fiber calorimeter inside the magnet and a lead-glass array downstream. Charged particle identification is achieved by measuring energy loss in the wire chambers and using the flight time of particles between the target and detectors outside the magnet. The signals from all detectors are recorded with flash ADCs and/or pipeline TDCs into memories allowing trigger decisions with a latency of 3.3 $μ$s. The detector operates routinely at trigger rates of 40 kHz and data rates of 600 megabytes per second. We describe the photon beam, the GlueX detector components, electronics, data-acquisition and monitoring systems, and the performance of the experiment during the first three years of operation. △ Less

Submitted 26 October, 2020; v1 submitted 28 May, 2020; originally announced May 2020.

Comments: Accepted by Nuclear Instruments and Methods A, 78 pages, 54 figures

Report number: JLAB-PHY-20-3195

Journal ref: Nucl. Instrum. & Meth. A987, 164807 (2021)

Measuring Tune, Chromaticity and Coupling

Authors: Rhodri Jones

Abstract: This chapter takes a look at the ways tune, chromaticity and coupling can be measured in synchrotrons. After briefly introducing the importance of these parameters for machine operation, a broad overview of the various instrumentation and analysis techniques used in their determination will be given. This chapter takes a look at the ways tune, chromaticity and coupling can be measured in synchrotrons. After briefly introducing the importance of these parameters for machine operation, a broad overview of the various instrumentation and analysis techniques used in their determination will be given. △ Less

Submitted 6 May, 2020; originally announced May 2020.

Comments: 19 pages, contribution to the CAS - CERN Accelerator School: Beam Instrumentation, 2-15 June 2018, Tuusula, Finland

Construction of precision wire readout planes for the Short-Baseline Near Detector (SBND)

Authors: R. Acciarri, C. Adams, C. Andreopoulos, J. Asaadi, M. Babicz, C. Backhouse, W. Badgett, L. F. Bagby, D. Barker, C. Barnes, A. Basharina-Freshville, V. Basque, A. Baxter, M. C. Q. Bazetto, O. Beltramello, M. Betancourt, A. Bhanderi, A. Bhat, M. R. M. Bishai, A. Bitadze, A. S. T. Blake, J. Boissevain, C. Bonifazi, J. Y. Book, D. Brailsford , et al. (170 additional authors not shown)

Abstract: The Short-Baseline Near Detector time projection chamber is unique in the design of its charge readout planes. These anode plane assemblies (APAs) have been fabricated and assembled to meet strict accuracy and precision requirements: wire spacing of 3 mm +/- 0.5 mm and wire tension of 7 N +/- 1 N across 3,964 wires per APA, and flatness within 0.5 mm over the 4 m +/- 2.5 m extent of each APA. This… ▽ More The Short-Baseline Near Detector time projection chamber is unique in the design of its charge readout planes. These anode plane assemblies (APAs) have been fabricated and assembled to meet strict accuracy and precision requirements: wire spacing of 3 mm +/- 0.5 mm and wire tension of 7 N +/- 1 N across 3,964 wires per APA, and flatness within 0.5 mm over the 4 m +/- 2.5 m extent of each APA. This paper describes the design, manufacture and assembly of these key detector components, with a focus on the quality assurance at each stage. △ Less

Submitted 24 April, 2020; v1 submitted 19 February, 2020; originally announced February 2020.

Comments: 42 pages, 45 figures. Prepared for submission to JINST