Showing 1–50 of 55 results for author: Jo, K

Absolute light yield measurement of NaI:Tl crystals for dark matter search

Authors: Nguyen Thanh Luan, Kim Hong Joo, Lee Hyun Su, ** Jegal, Lam Tan Truc, Khan Arshad, Nguyen Duc Ton

Abstract: The NaI:Tl crystals were early investigated and used for wide application fields due to high light yield and crystal growth advantages. So far, the absolute light yields of NaI:Tl crystal have typically been known to be 40 ph/keV. However, it varies widely, far from the theoretical estimation. Since the high light yield and better sensitivity of NaI:Tl crystal is important for low mass dark matter… ▽ More The NaI:Tl crystals were early investigated and used for wide application fields due to high light yield and crystal growth advantages. So far, the absolute light yields of NaI:Tl crystal have typically been known to be 40 ph/keV. However, it varies widely, far from the theoretical estimation. Since the high light yield and better sensitivity of NaI:Tl crystal is important for low mass dark matter search. Therefore, it is necessary to use high light NaI:Tl crystal, and absolute light yield should be measured with accuracy. In this work, we use the single photoelectron technique for measuring the absolute light yield of 35 NaI:Tl crystals with various sizes from different vendors. There are several high-quality crystals from the COSINE-100 experiment and commercial companies in these crystals. The theoretical estimation and GEANT4 optical simulation have been studied to investigate the PMT optics. Results show the essential role of this correction in avoiding overrated light yield values. The SPE technique using different PMT was compared to the photodiode and avalanche photodiode methods. A 10% systematic error was obtained. Our results show the excellent absolute light yield of NaI:Tl, at 59.4 +- 5.9 ph/keV, while the theoretical predicted light yield is around 70 ph/keV. The evaluation with NaI:Tl crystals in the COSINE-100 experiment has been performed. The six crystals in the COSINE-100 experiment have a high light yield. Based on our results, the light loss of encapsulation needs to be improved, especially for the big-size crystals. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: 14 pages, 16 figures

Evaluation of the performance of the event reconstruction algorithms in the JSNS$^2$ experiment using a $^{252}$Cf calibration source

Authors: D. H. Lee, M. K. Cheoun, J. H. Choi, J. Y. Choi, T. Dodo, J. Goh, K. Haga, M. Harada, S. Hasegawa, W. Hwang, T. Iida, H. I. Jang, J. S. Jang, K. K. Joo, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim, J. Y. Kim, S. B Kim, W. Kim, H. Kinoshita, T. Konno, I. T. Lim , et al. (28 additional authors not shown)

Abstract: JSNS$^2$ searches for short baseline neutrino oscillations with a baseline of 24~meters and a target of 17~tonnes of the Gd-loaded liquid scintillator. The correct algorithm on the event reconstruction of events, which determines the position and energy of neutrino interactions in the detector, are essential for the physics analysis of the data from the experiment. Therefore, the performance of th… ▽ More JSNS$^2$ searches for short baseline neutrino oscillations with a baseline of 24~meters and a target of 17~tonnes of the Gd-loaded liquid scintillator. The correct algorithm on the event reconstruction of events, which determines the position and energy of neutrino interactions in the detector, are essential for the physics analysis of the data from the experiment. Therefore, the performance of the event reconstruction is carefully checked with calibrations using $^{252}$Cf source. This manuscript describes the methodology and the performance of the event reconstruction. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Pulse Shape Discrimination in JSNS$^2$

Authors: T. Dodo, M. K. Cheoun, J. H. Choi, J. Y. Choi, J. Goh, K. Haga, M. Harada, S. Hasegawa, W. Hwang, T. Iida, H. I. Jang, J. S. Jang, K. K. Joo, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim, J. Y. Kim, S. B. Kim, W. Kim, H. Kinoshita, T. Konno, D. H. Lee, I. T. Lim , et al. (29 additional authors not shown)

Abstract: JSNS$^2$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment that is searching for sterile neutrinos via the observation of $\barν_μ \rightarrow \barν_e$ appearance oscillations using neutrinos with muon decay-at-rest. For this search, rejecting cosmic-ray-induced neutron events by Pulse Shape Discrimination (PSD) is essential because the JSNS$^2$ detector is loca… ▽ More JSNS$^2$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment that is searching for sterile neutrinos via the observation of $\barν_μ \rightarrow \barν_e$ appearance oscillations using neutrinos with muon decay-at-rest. For this search, rejecting cosmic-ray-induced neutron events by Pulse Shape Discrimination (PSD) is essential because the JSNS$^2$ detector is located above ground, on the third floor of the building. We have achieved 95$\%$ rejection of neutron events while kee** 90$\%$ of signal, electron-like events using a data driven likelihood method. △ Less

Submitted 28 March, 2024; originally announced April 2024.

Comments: arXiv admin note: text overlap with arXiv:2111.07482, arXiv:2308.02722

Giant Optical Anisotropy in 2D Metal-Organic Chalcogenates

Authors: Bongjun Choi, Kiyoung Jo, Mahfujur Rahaman, Adam Alfieri, Jason Lynch, Greg K. Pribil, Hyeongjun Koh, Eric A. Stach, Deep Jariwala

Abstract: Optical anisotropy is a fundamental attribute of some crystalline materials and is quantified via birefringence. A birefringent crystal not only gives rise to asymmetrical light propagation but also attenuation along two distinct polarizations, a phenomenon called linear dichroism (LD). Two-dimensional (2D) layered materials with high in- and out-of-plane anisotropy have garnered interest in this… ▽ More Optical anisotropy is a fundamental attribute of some crystalline materials and is quantified via birefringence. A birefringent crystal not only gives rise to asymmetrical light propagation but also attenuation along two distinct polarizations, a phenomenon called linear dichroism (LD). Two-dimensional (2D) layered materials with high in- and out-of-plane anisotropy have garnered interest in this regard. Mithrene, a 2D metal-organic chalcogenate (MOCHA) compound, exhibits strong excitonic resonances due to its naturally occurring multi-quantum well (MQW) structure and in-plane anisotropic response in the blue wavelength (~400-500 nm) regime. The MQW structure and the large refractive indices of mithrene allow the hybridization of the excitons with photons to form self-hybridized exciton-polaritons in mithrene crystals with appropriate thicknesses. Here, we report the giant birefringence (~1.01) and tunable in-plane anisotropic response of mithrene, which stem from its low symmetry crystal structure and unique excitonic properties. We show that the LD in mithrene can be tuned by leveraging the anisotropic exciton-polariton formation via the cavity coupling effect exhibiting giant in-plane LD (~77.1%) at room temperature. Our results indicate that mithrene is an ideal polaritonic birefringent material for polarization-sensitive nanophotonic applications in the short wavelength regime. △ Less

Submitted 3 April, 2024; v1 submitted 31 December, 2023; originally announced January 2024.

Non-Volatile Control of Valley Polarized Emission in 2D WSe2-AlScN Heterostructures

Authors: Simrjit Singh, Kwan-Ho Kim, Kiyoung Jo, Pariasadat Musavigharavi, Bumho Kim, Jeffrey Zheng, Nicholas Trainor, Chen Chen, Joan M. Redwing, Eric A Stach, Roy H Olsson III, Deep Jariwala

Abstract: Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-eff… ▽ More Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-effect transistors using a ML-WSe2 channel and a AlScN ferroelectric dielectric, and experimentally demonstrate efficient tuning as well as non-volatile control of valley polarization. We measured a large array of transistors and obtained a maximum valley polarization of ~27% at 80 K with stable retention up to 5400 secs. The enhancement in the valley polarization was ascribed to the efficient exciton-to-trion (X-T) conversion and its coupling with an out-of-plane electric field, viz. the quantum-confined Stark effect. This changes the valley depolarization pathway from strong exchange interactions to slow spin-flip intervalley scattering. Our research demonstrates a promising approach for achieving non-volatile control over valley polarization and suggests new design principles for practical valleytronic devices. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: Manuscript (22 pages and 5 figures), supporting information

Molecular mechanism of anion permeation through aquaporin 6

Authors: Eiji Yamamoto, Keehyoung Joo, Jooyoung Lee, Mark S. P. Sansom, Masato Yasui

Abstract: Aquaporins (AQPs) are recognized as transmembrane water channels that facilitate selective water permeation through their monomeric pores. Among the AQP family, AQP6 has a unique characteristic as an anion channel, which is allosterically controlled by pH conditions and is eliminated by a single amino acid mutation. However, the molecular mechanism of anion permeation through AQP6 remains unclear.… ▽ More Aquaporins (AQPs) are recognized as transmembrane water channels that facilitate selective water permeation through their monomeric pores. Among the AQP family, AQP6 has a unique characteristic as an anion channel, which is allosterically controlled by pH conditions and is eliminated by a single amino acid mutation. However, the molecular mechanism of anion permeation through AQP6 remains unclear. Using molecular dynamics simulations in the presence of a transmembrane voltage utilizing an ion concentration gradient, we show that chloride ions permeate through the pore corresponding to the central axis of the AQP6 homotetramer. Under low pH conditions, a subtle opening of the hydrophobic selective filter (SF), located near the extracellular part of the central pore, becomes wetted and enables anion permeation. Our simulations also indicate that a single mutation (N63G) in human AQP6, located at the central pore, significantly reduces anion conduction, consistent with experimental data. Moreover, we demonstrate the pH-sensing mechanism in which the protonation of H184 and H189 under low pH conditions allosterically triggers the gating of the SF region. These results suggest a unique pH-dependent allosteric anion permeation mechanism in AQP6 and could clarify the role of the central pore in some of the AQP tetramers. △ Less

Submitted 8 November, 2023; originally announced November 2023.

The acrylic vessel for JSNS$^{2}$-II neutrino target

Authors: C. D. Shin, S. Ajimura, M. K. Cheoun, J. H. Choi, J. Y. Choi, T. Dodo, J. Goh, K. Haga, M. Harada, S. Hasegawa, T. Hiraiwa, W. Hwang, T. Iida, H. I. Jang, J. S. Jang, H. Jeon, S. Jeon, K. K. Joo, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim, J. Y. Kim, S. B. Kim , et al. (35 additional authors not shown)

Abstract: The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment designed for the search for sterile neutrinos. The experiment is currently at the stage of the second phase named JSNS$^{2}$-II with two detectors at near and far locations from the neutrino source. One of the key components of the experiment is an acrylic vessel, that is used for the target volume… ▽ More The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment designed for the search for sterile neutrinos. The experiment is currently at the stage of the second phase named JSNS$^{2}$-II with two detectors at near and far locations from the neutrino source. One of the key components of the experiment is an acrylic vessel, that is used for the target volume for the detection of the anti-neutrinos. The specifications, design, and measured properties of the acrylic vessel are described. △ Less

Submitted 11 December, 2023; v1 submitted 4 September, 2023; originally announced September 2023.

Journal ref: 2023 JINST 18 T12001

Study on the accidental background of the JSNS$^2$ experiment

Authors: D. H. Lee, S. Ajimura, M. K. Cheoun, J. H. Choi, J. Y. Choi, T. Dodo, J. Goh, K. Haga, M. Harada, S. Hasegawa, T. Hiraiwa, W. Hwang, H. I. Jang, J. S. Jang, H. Jeon, S. Jeon, K. K. Joo, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim, J. Y. Kim, S. B. Kim, W. Kim , et al. (33 additional authors not shown)

Abstract: JSNS$^2$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment which searches for sterile neutrinos via the observation of $\barν_μ \to \barν_{e}$ appearance oscillations using muon decay-at-rest neutrinos. The data taking of JSNS$^2$ have been performed from 2021. In this manuscript, a study of the accidental background is presented. The rate of the accidental back… ▽ More JSNS$^2$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment which searches for sterile neutrinos via the observation of $\barν_μ \to \barν_{e}$ appearance oscillations using muon decay-at-rest neutrinos. The data taking of JSNS$^2$ have been performed from 2021. In this manuscript, a study of the accidental background is presented. The rate of the accidental background is (9.29$\pm 0.39) \times 10^{-8}$ / spill with 0.75 MW beam power and comparable to the number of searching signals. △ Less

Submitted 22 April, 2024; v1 submitted 4 August, 2023; originally announced August 2023.

Comments: arXiv admin note: substantial text overlap with arXiv:2111.07482

Journal ref: Eur. Phys. J. C 84, 409 (2024)

Exciton Confinement in Two-Dimensional, In-Plane, Quantum Heterostructures

Authors: Gwangwoo Kim, Benjamin Huet, Christopher E. Stevens, Kiyoung Jo, Jeng-Yuan Tsai, Saiphaneendra Bachu, Meghan Leger, Kyung Yeol Ma, Nicholas R. Glavin, Hyeon Suk Shin, Nasim Alem, Qimin Yan, Joshua R. Hedrickson, Joan M. Redwing, Deep Jariwala

Abstract: Two-dimensional (2D) semiconductors are promising candidates for optoelectronic application and quantum information processes due to their inherent out-of-plane 2D confinement. In addition, they offer the possibility of achieving low-dimensional in-plane exciton confinement, similar to zero-dimensional quantum dots, with intriguing optical and electronic properties via strain or composition engine… ▽ More Two-dimensional (2D) semiconductors are promising candidates for optoelectronic application and quantum information processes due to their inherent out-of-plane 2D confinement. In addition, they offer the possibility of achieving low-dimensional in-plane exciton confinement, similar to zero-dimensional quantum dots, with intriguing optical and electronic properties via strain or composition engineering. However, realizing such laterally confined 2D monolayers and systematically controlling size-dependent optical properties remain significant challenges. Here, we report the observation of lateral confinement of excitons in epitaxially grown in-plane MoSe2 quantum dots (~15-60 nm wide) inside a continuous matrix of WSe2 monolayer film via a sequential epitaxial growth process. Various optical spectroscopy techniques reveal the size-dependent exciton confinement in the MoSe2 monolayer quantum dots with exciton blue shift (12-40 meV) at a low temperature as compared to continuous monolayer MoSe2. Finally, single-photon emission was also observed from the smallest dots at 1.6 K. Our study opens the door to compositionally engineered, tunable, in-plane quantum light sources in 2D semiconductors. △ Less

Submitted 12 July, 2023; originally announced July 2023.

Comments: Main Manuscript: 29 pages, 4 figures Supplementary Information: 14 pages, 12 figures

Tunable Localized Charge Transfer Excitons in a Mixed Dimensional van der Waals Heterostructure

Authors: Mahfujur Rahaman, Emanuele Marino, Alan G. Joly, Seunguk Song, Zhiqiao Jiang, Brian T. OCallahan, Daniel J. Rosen, Kiyoung Jo, Gwangwoo Kim, Patrick Z. El-Khoury, Christopher B. Murray, Deep Jariwala

Abstract: Observation of interlayer, charge-transfer (CT) excitons in van der Waals heterostructures (vdWHs) based on 2D-2D systems has been well investigated. While conceptually interesting, these charge transfer excitons are highly delocalized and spatially localizing them requires twisting layers at very specific angles. This issue of localizing the CT excitons can be overcome via making mixed dimensiona… ▽ More Observation of interlayer, charge-transfer (CT) excitons in van der Waals heterostructures (vdWHs) based on 2D-2D systems has been well investigated. While conceptually interesting, these charge transfer excitons are highly delocalized and spatially localizing them requires twisting layers at very specific angles. This issue of localizing the CT excitons can be overcome via making mixed dimensional vdWHs (MDHs) where one of the components is a spatially quantum confined medium. Here, we demonstrate the formation of CT excitons in a 2D/quasi-2D system comprising MoSe2 and WSe2 monolayers and CdSe/CdS based core/shell nanoplates (NPLs). Spectral signatures of CT excitons in our MDHs were resolved locally at the 2D/single-NPL heterointerface using tip-enhanced photoluminescence (TEPL) at room temperature. By varying both the 2D material, the shell thickness of the NPLs, and applying out-of-plane electric field, the exciton resonance energy was tuned by up to 120 meV. Our finding is a significant step towards the realization of highly tunable MDH-based next generation photonic devices. △ Less

Submitted 22 October, 2022; originally announced October 2022.

Comments: 4 figures, 20 pages

Design of the ECCE Detector for the Electron Ion Collider

Authors: J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin, R. Capobianco , et al. (259 additional authors not shown)

Abstract: The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent track… ▽ More The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector. △ Less

Submitted 11 May, 2023; v1 submitted 6 September, 2022; originally announced September 2022.

Comments: 32 pages, 29 figures, 9 tables

CORE -- a COmpact detectoR for the EIC

Authors: CORE Collaboration, R. Alarcon, M. Baker, V. Baturin, P. Brindza, S. Bueltmann, M. Bukhari, R. Capobianco, E. Christy, S. Diehl, M. Dugger, R. Dupré, R. Dzhygadlo, K. Flood, K. Gnanvo, L. Guo, T. Hayward, M. Hattawy, M. Hoballah, M. Hohlmann, C. E. Hyde, Y. Ilieva, W. W. Jacobs, K. Joo, G. Kalicy , et al. (34 additional authors not shown)

Abstract: The COmpact detectoR for the Eic (CORE) Proposal was submitted to the EIC "Call for Collaboration Proposals for Detectors". CORE comprehensively covers the physics scope of the EIC Community White Paper and the National Academies of Science 2018 report. The design exploits advances in detector precision and granularity to minimize size. The central detector includes a 3Tesla, 2.5m solenoid. Tracki… ▽ More The COmpact detectoR for the Eic (CORE) Proposal was submitted to the EIC "Call for Collaboration Proposals for Detectors". CORE comprehensively covers the physics scope of the EIC Community White Paper and the National Academies of Science 2018 report. The design exploits advances in detector precision and granularity to minimize size. The central detector includes a 3Tesla, 2.5m solenoid. Tracking is primarily silicon. Electromagnetic calorimetry is based on the high performance crystals. Ring-imaging Cherenkov detectors provide hadronic particle identification. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Comments: Contact authors: C.E. Hyde, [email protected] and P. Nadel-Turonski, [email protected]

Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept

Authors: A. Bylinkin, C. T. Dean, S. Fegan, D. Gangadharan, K. Gates, S. J. D. Kay, I. Korover, W. B. Li, X. Li, R. Montgomery, D. Nguyen, G. Penman, J. R. Pybus, N. Santiesteban, R. Trotta, A. Usman, M. D. Baker, J. Frantz, D. I. Glazier, D. W. Higinbotham, T. Horn, J. Huang, G. Huber, R. Reed, J. Roche , et al. (258 additional authors not shown)

Abstract: This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fr… ▽ More This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector. △ Less

Submitted 6 March, 2023; v1 submitted 30 August, 2022; originally announced August 2022.

Direct Nano-Imaging of Light-Matter Interactions in Nanoscale Excitonic Emitters

Authors: Kiyoung Jo, Emanuele Marino, Jason Lynch, Zhiqiao Jiang, Natalie Gogotsi, Thomas P. Darlington, Mohammad Soroush, P. James Schuck, Nicholas J. Borys, Christopher Murray, Deep Jariwala

Abstract: Strong light-matter interactions in localized nano-emitters when placed near metallic mirrors have been widely reported via spectroscopic studies in the optical far-field. Here, we report a near-field nano-spectroscopic study of the localized nanoscale emitters on a flat Au substrate. We observe strong-coupling of the excitonic dipoles in quasi 2-dimensional CdSe/CdxZnS1-xS nanoplatelets with gap… ▽ More Strong light-matter interactions in localized nano-emitters when placed near metallic mirrors have been widely reported via spectroscopic studies in the optical far-field. Here, we report a near-field nano-spectroscopic study of the localized nanoscale emitters on a flat Au substrate. We observe strong-coupling of the excitonic dipoles in quasi 2-dimensional CdSe/CdxZnS1-xS nanoplatelets with gap mode plasmons formed between the Au tip and substrate. We also observe directional propagation on the Au substrate of surface plasmon polaritons launched from the excitons of the nanoplatelets as wave-like fringe patterns in the near-field photoluminescence maps. These fringe patterns were confirmed via extensive electromagnetic wave simulations to be standing-waves formed between the tip and the emitter on the substrate plane. We further report that both light confinement and the in-plane emission can be engineered by tuning the surrounding dielectric environment of the nanoplatelets. Our results lead to renewed understanding of in-plane, near-field electromagnetic signal transduction from the localized nano-emitters with profound implications in nano and quantum photonics as well as resonant optoelectronics. △ Less

Submitted 20 August, 2022; originally announced August 2022.

Comments: manuscript + supporting information

Alignment of the CLAS12 central hybrid tracker with a Kalman Filter

Authors: S. J. Paul, A. Peck, M. Arratia, Y. Gotra, V. Ziegler, R. De Vita, F. Bossu, M. Defurne, H. Atac, C. Ayerbe Gayoso, L. Baashen, N. A. Baltzell, L. Barion, M. Bashkanov, M. Battaglieri, I. Bedlinskiy, B. Benkel, F. Benmokhtar, A. Bianconi, L. Biondo, A. S. Biselli, M. Bondi, S. Boiarinov, K. Th. Brinkmann, W. J. Briscoe , et al. (109 additional authors not shown)

Abstract: Several factors can contribute to the difficulty of aligning the sensors of tracking detectors, including a large number of modules, multiple types of detector technologies, and non-linear strip patterns on the sensors. All three of these factors apply to the CLAS12 CVT, which is a hybrid detector consisting of planar silicon sensors with non-parallel strips, and cylindrical micromegas sensors wit… ▽ More Several factors can contribute to the difficulty of aligning the sensors of tracking detectors, including a large number of modules, multiple types of detector technologies, and non-linear strip patterns on the sensors. All three of these factors apply to the CLAS12 CVT, which is a hybrid detector consisting of planar silicon sensors with non-parallel strips, and cylindrical micromegas sensors with longitudinal and arc-shaped strips located within a 5~T superconducting solenoid. To align this detector, we used the Kalman Alignment Algorithm, which accounts for correlations between the alignment parameters without requiring the time-consuming inversion of large matrices. This is the first time that this algorithm has been adapted for use with hybrid technologies, non-parallel strips, and curved sensors. We present the results for the first alignment of the CLAS12 CVT using straight tracks from cosmic rays and from a target with the magnetic field turned off. After running this procedure, we achieved alignment at the level of 10~$μ$m, and the widths of the residual spectra were greatly reduced. These results attest to the flexibility of this algorithm and its applicability to future use in the CLAS12 CVT and other hybrid or curved trackers, such as those proposed for the future Electron-Ion Collider. △ Less

Submitted 9 August, 2022; originally announced August 2022.

Journal ref: Nucl.Instrum.Meth.A 1049 (2023) 168032

Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider

Authors: X. Li, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin , et al. (262 additional authors not shown)

Abstract: The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will… ▽ More The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region. △ Less

Submitted 23 July, 2022; v1 submitted 21 July, 2022; originally announced July 2022.

Comments: Open heavy flavor studies with the EIC reference detector design by the ECCE consortium. 11 pages, 11 figures, to be submitted to the Nuclear Instruments and Methods A

Report number: LANL report number: LA-UR-22-27181

Exclusive J/$ψ$ Detection and Physics with ECCE

Authors: X. Li, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann, M. H. S. Bukhari, A. Bylinkin , et al. (262 additional authors not shown)

Abstract: Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the… ▽ More Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE. △ Less

Submitted 21 July, 2022; originally announced July 2022.

Comments: 11 pages, 14 figures, 1 table

Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider

Authors: F. Bock, N. Schmidt, P. K. Wang, N. Santiesteban, T. Horn, J. Huang, J. Lajoie, C. Munoz Camacho, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, W. Boeglin, M. Borysova, E. Brash , et al. (263 additional authors not shown)

Abstract: We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key… ▽ More We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented. △ Less

Submitted 19 July, 2022; originally announced July 2022.

Comments: 19 pages, 22 figures, 5 tables

AI-assisted Optimization of the ECCE Tracking System at the Electron Ion Collider

Authors: C. Fanelli, Z. Papandreou, K. Suresh, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, J. C. Bernauer, F. Bock, W. Boeglin, M. Borysova, E. Brash, P. Brindza, W. J. Briscoe, M. Brooks, S. Bueltmann , et al. (258 additional authors not shown)

Abstract: The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to… ▽ More The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5T solenoid. The EIC detector proposal review concluded that the ECCE design will serve as the reference design for an EIC detector. Herein we describe a comprehensive optimization of the ECCE tracker using AI. The work required a complex parametrization of the simulated detector system. Our approach dealt with an optimization problem in a multidimensional design space driven by multiple objectives that encode the detector performance, while satisfying several mechanical constraints. We describe our strategy and show results obtained for the ECCE tracking system. The AI-assisted design is agnostic to the simulation framework and can be extended to other sub-detectors or to a system of sub-detectors to further optimize the performance of the EIC detector. △ Less

Submitted 19 May, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 16 pages, 18 figures, 2 appendices, 3 tables

Scientific Computing Plan for the ECCE Detector at the Electron Ion Collider

Authors: J. C. Bernauer, C. T. Dean, C. Fanelli, J. Huang, K. Kauder, D. Lawrence, J. D. Osborn, C. Paus, J. K. Adkins, Y. Akiba, A. Albataineh, M. Amaryan, I. C. Arsene, C. Ayerbe Gayoso, J. Bae, X. Bai, M. D. Baker, M. Bashkanov, R. Bellwied, F. Benmokhtar, V. Berdnikov, F. Bock, W. Boeglin, M. Borysova, E. Brash , et al. (256 additional authors not shown)

Abstract: The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing thes… ▽ More The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required for the future of ECCE are described. △ Less

Submitted 17 May, 2022; originally announced May 2022.

Journal ref: NIMA 1047, 167859 (2023)

High Density, Localized Quantum Emitters in Strained 2D Semiconductors

Authors: Gwangwoo Kim, Hyong Min Kim, Pawan Kumar, Mahfujur Rahaman, Christopher E. Stevens, Jonghyuk Jeon, Kiyoung Jo, Kwan-Ho Kim, Nicholas Trainor, Haoyue Zhu, Byeong-Hyeok Sohn, Eric A. Stach, Joshua R. Hendrickson, Nicholas R Glavin, Joonki Suh, Joan M. Redwing, Deep Jariwala

Abstract: Two-dimensional chalcogenide semiconductors have recently emerged as a host material for quantum emitters of single photons. While several reports on defect and strain-induced single photon emission from 2D chalcogenides exist, a bottom-up, lithography-free approach to producing a high density of emitters remains elusive. Further, the physical properties of quantum emission in the case of strained… ▽ More Two-dimensional chalcogenide semiconductors have recently emerged as a host material for quantum emitters of single photons. While several reports on defect and strain-induced single photon emission from 2D chalcogenides exist, a bottom-up, lithography-free approach to producing a high density of emitters remains elusive. Further, the physical properties of quantum emission in the case of strained 2D semiconductors are far from being understood. Here, we demonstrate a bottom-up, scalable, and lithography-free approach to creating large areas of localized emitters with high density (~150 emitters/um2) in a WSe2 monolayer. We induce strain inside the WSe2 monolayer with high spatial density by conformally placing the WSe2 monolayer over a uniform array of Pt nanoparticles with a size of 10 nm. Cryogenic, time-resolved, and gate-tunable luminescence measurements combined with near-field luminescence spectroscopy suggest the formation of localized states in strained regions that emit single photons with a high spatial density. Our approach of using a metal nanoparticle array to generate a high density of strained quantum emitters opens a new path towards scalable, tunable, and versatile quantum light sources. △ Less

Submitted 1 April, 2022; originally announced April 2022.

Comments: 45 pages, 20 figures (5 main figures, 15 supporting figures)

Journal ref: ACS Nano, 2022

Self-Hybridized Polaritonic Emission from Layered Perovskites

Authors: Surendra B. Anantharaman, Christopher E. Stevens, Jason Lynch, Baokun Song, ** Hou, Huiqin Zhang, Kiyoung Jo, Pawan Kumar, Jean-Christophe Blancon, Aditya D. Mohite, Joshua R. Hendrickson, Deep Jariwala

Abstract: Light-matter coupling in excitonic materials has been the subject of intense investigation due to emergence of new excitonic materials. Two-dimensional layered hybrid organic/inorganic perovskites (2D HOIPs) support strongly bound excitons at room-temperatures with some of the highest oscillator strengths and electric loss tangents among the known excitonic materials. Here, we report strong light-… ▽ More Light-matter coupling in excitonic materials has been the subject of intense investigation due to emergence of new excitonic materials. Two-dimensional layered hybrid organic/inorganic perovskites (2D HOIPs) support strongly bound excitons at room-temperatures with some of the highest oscillator strengths and electric loss tangents among the known excitonic materials. Here, we report strong light-matter coupling in Ruddlesden-Popper phase 2D-HOIPs crystals without the necessity of an external cavity. We report concurrent occurrence of multiple-orders of hybrid light-matter states via both reflectance and luminescence spectroscopy in thick (> 100 nm) crystals and near-unity absorption in thin (< 20 nm) crystals. We observe resonances with quality factors > 250 in hybridized exciton-polaritons and identify a linear correlation between exciton-polariton mode splitting and extinction coefficient of the various 2D-HOIPs. Our work opens the door to studying polariton dynamics in self-hybridized and open cavity systems with broad applications in optoelectronics and photochemistry. △ Less

Submitted 13 May, 2021; originally announced May 2021.

Journal ref: Nano Letters 2021

The JSNS^2 Detector

Authors: S. Ajimura, M. Botran, J. H. Choi, J. W. Choi, M. K. Cheoun, T. Dodo, H. Furuta, J. Goh, K. Haga, M. Harada, S. Hasegawa, Y. Hino, T. Hiraiwa, H. I. Jang, J. S. Jang, M. C. Jang, H. Jeon, S. Jeon, K. K. Joo, J. R. Jordan, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim , et al. (41 additional authors not shown)

Abstract: The JSNS^2 (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for oscillations involving a sterile neutrino in the eV^2 mass-splitting range. The experiment will search for the appearance of electron antineutrinos oscillated from muon antineutrinos. The electron antineutrinos are detected via the inverse beta decay process using a liquid scintillator det… ▽ More The JSNS^2 (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for oscillations involving a sterile neutrino in the eV^2 mass-splitting range. The experiment will search for the appearance of electron antineutrinos oscillated from muon antineutrinos. The electron antineutrinos are detected via the inverse beta decay process using a liquid scintillator detector. A 1MW beam of 3 GeV protons incident on a spallation neutron target produces an intense and pulsed neutrino source from pion, muon, and kaon decay at rest. The JSNS^2 detector is located 24 m away from the neutrino source and began operation from June 2020. The detector contains 17 tonnes of gadolinium (Gd) loaded liquid scintillator (LS) in an acrylic vessel, as a neutrino target. It is surrounded by 31 tonnes of unloaded LS in a stainless steel tank. Optical photons produced in LS are viewed by 120 R7081 Hamamatsu 10-inch Photomultiplier Tubes (PMTs). In this paper, we describe the JSNS^2 detector design, construction, and operation. △ Less

Submitted 24 August, 2021; v1 submitted 27 April, 2021; originally announced April 2021.

Comments: 41 pages, 29 figures

Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report

Authors: R. Abdul Khalek, A. Accardi, J. Adam, D. Adamiak, W. Akers, M. Albaladejo, A. Al-bataineh, M. G. Alexeev, F. Ameli, P. Antonioli, N. Armesto, W. R. Armstrong, M. Arratia, J. Arrington, A. Asaturyan, M. Asai, E. C. Aschenauer, S. Aune, H. Avagyan, C. Ayerbe Gayoso, B. Azmoun, A. Bacchetta, M. D. Baker, F. Barbosa, L. Barion , et al. (390 additional authors not shown)

Abstract: This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon… ▽ More This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and develo** detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions. This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter △ Less

Submitted 26 October, 2021; v1 submitted 8 March, 2021; originally announced March 2021.

Comments: 902 pages, 415 authors, 151 institutions

Report number: BNL-220990-2021-FORE, JLAB-PHY-21-3198, LA-UR-21-20953

Journal ref: Nucl. Phys. A 1026 (2022) 122447

Spatiotemporal Imaging of Thickness-Induced Band Bending Junctions

Authors: Joeson Wong, Artur R. Davoyan, Bolin Liao, Andrey Krayev, Kiyoung Jo, Eli Rotenberg, Aaron Bostwick, Chris Jozwiak, Deep Jariwala, Ahmed Zewail, Harry A. Atwater

Abstract: Van der Waals materials exhibit naturally passivated surfaces and can form versatile heterostructures, enabling observation of carrier transport mechanisms not seen in three-dimensional materials. Here we report observation of a "band bending junction", a new type of semiconductor homojunction whose surface potential landscape depends solely on a difference in thickness between the two semiconduct… ▽ More Van der Waals materials exhibit naturally passivated surfaces and can form versatile heterostructures, enabling observation of carrier transport mechanisms not seen in three-dimensional materials. Here we report observation of a "band bending junction", a new type of semiconductor homojunction whose surface potential landscape depends solely on a difference in thickness between the two semiconductor regions atop a buried heterojunction interface. Using MoS2 on Au to form a buried heterojunction interface, we find that lateral surface potential differences can arise in MoS2 from the local extent of vertical band bending in thin and thick MoS2 regions. Using scanning ultrafast electron microscopy, we examine the spatiotemporal dynamics of photogenerated charge carriers and find that lateral carrier separation is enabled by a band bending junction, which is confirmed with semiconductor transport simulations. Band bending junctions may therefore enable new electronic and optoelectronic devices in Van der Waals materials that rely on thickness variations rather than do** to separate charge carriers. △ Less

Submitted 4 March, 2021; originally announced March 2021.

Comments: 16 pages, 4 figures

Exciton-Photonics: From Fundamental Science to Applications

Authors: Surendra B. Anantharaman, Kiyoung Jo, Deep Jariwala

Abstract: Semiconductors in all dimensionalities ranging from 0D quantum dots and molecules to 3D bulk crystals support bound electron-hole pair quasiparticles termed as excitons. Over the past two decades, the emergence of a variety of low-dimensional semiconductors that support excitons combined with advances in nano-optics and photonics has burgeoned a new area of research that focuses on engineering, im… ▽ More Semiconductors in all dimensionalities ranging from 0D quantum dots and molecules to 3D bulk crystals support bound electron-hole pair quasiparticles termed as excitons. Over the past two decades, the emergence of a variety of low-dimensional semiconductors that support excitons combined with advances in nano-optics and photonics has burgeoned a new area of research that focuses on engineering, imaging, and modulating coupling between excitons and photons, resulting in the formation of hybrid-quasiparticles termed exciton-polaritons. This new area has the potential to bring about a paradigm shift in quantum optics, as well as classical optoelectronic devices. Here, we present a review on the coupling of light in excitonic semiconductors and investigation of the unique properties of these hybrid quasiparticles via both far-field and near-field imaging and spectroscopy techniques. Special emphasis is laid on recent advances with critical evaluation of the bottlenecks that plague various materials towards practical device implementations including quantum light sources. Our review highlights a growing need for excitonic materials development together with optical engineering and imaging techniques to harness the utility of excitons and their host materials for a variety of applications. △ Less

Submitted 25 February, 2021; originally announced February 2021.

Comments: review article. 9 figures

Journal ref: ACS Nano 2021

Direct Opto-Electronic Imaging of 2D Semiconductor - 3D Metal Buried Interfaces

Authors: Kiyoung Jo, Pawan Kumar, Joseph Orr, Surendra B. Anantharaman, **shui Miao, Michael Motala, Arkamita Bandyopadhyay, Kim Kisslinger, Christopher Muratore, Vivek B. Shenoy, Eric Stach, Nicholas Glavin, Deep Jariwala

Abstract: The semiconductor-metal junction is one of the most critical factors for high performance electronic devices. In two-dimensional (2D) semiconductor devices, minimizing the voltage drop at this junction is particularly challenging and important. Despite numerous studies concerning contact resistance in 2D semiconductors, the exact nature of the buried interface under a three-dimensional (3D) metal… ▽ More The semiconductor-metal junction is one of the most critical factors for high performance electronic devices. In two-dimensional (2D) semiconductor devices, minimizing the voltage drop at this junction is particularly challenging and important. Despite numerous studies concerning contact resistance in 2D semiconductors, the exact nature of the buried interface under a three-dimensional (3D) metal remains unclear. Herein, we report the direct measurement of electrical and optical responses of 2D semiconductor-metal buried interfaces using a recently developed metal-assisted transfer technique to expose the buried interface which is then directly investigated using scanning probe techniques. We characterize the spatially varying electronic and optical properties of this buried interface with < 20 nm resolution. To be specific, potential, conductance and photoluminescence at the buried metal/MoS$_2$ interface are correlated as a function of a variety of metal deposition conditions as well as the type of metal contacts. We observe that direct evaporation of Au on MoS$_2$ induces a large strain of ~5% in the MoS$_2$ which, coupled with charge transfer, leads to degenerate do** of the MoS$_2$ underneath the contact. These factors lead to improvement of contact resistance to record values of 138 kohm-um, as measured using local conductance probes. This approach was adopted to characterize MoS$_2$-In/Au alloy interfaces, demonstrating contact resistance as low as 63 kohm-um. Our results highlight that the MoS$_2$/Metal interface is sensitive to device fabrication methods, and provides a universal strategy to characterize buried contact interfaces involving 2D semiconductors. △ Less

Submitted 28 January, 2021; originally announced January 2021.

Comments: 6 figures + supplement

Journal ref: ACS Nano 2021

Supernova Model Discrimination with Hyper-Kamiokande

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, I. Anghel, L. H. V. Anthony, M. Antonova, A. Araya, Y. Asaoka, Y. Ashida, V. Aushev, F. Ballester, I. Bandac, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, M. Bergevin , et al. (478 additional authors not shown)

Abstract: Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-colla… ▽ More Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations towards a precise reproduction of the explosion mechanism observed in nature. △ Less

Submitted 20 July, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 21 pages, 7 figures. Article based on thesis published as arXiv:2002.01649. v2: added references and some explanations in response to reviewer comments

Journal ref: Astrophys.J. 916 (2021) 15

Efficacy of Boron Nitride Encapsulation against Plasma-Processing in van der Waals Heterostructures

Authors: Pawan Kumar, Kelotchi S. Figueroa, Alexandre C. Foucher, Kiyoung Jo, Natalia Acero, Eric A. Stach, Deep Jariwala

Abstract: Two-dimensional (2D) transition metal dichalcogenides (TMDCs) are the subject of intense investigation for applications in optics, electronics, catalysis, and energy storage. Their optical and electronic properties can be significantly enhanced when encapsulated in an environment that is free of charge disorder. Because hexagonal boron nitride (h-BN) is atomically thin, highly-crystalline, and is… ▽ More Two-dimensional (2D) transition metal dichalcogenides (TMDCs) are the subject of intense investigation for applications in optics, electronics, catalysis, and energy storage. Their optical and electronic properties can be significantly enhanced when encapsulated in an environment that is free of charge disorder. Because hexagonal boron nitride (h-BN) is atomically thin, highly-crystalline, and is a strong insulator, it is one of the most commonly used 2D materials to encapsulate and passivate TMDCs. In this report, we examine how ultrathin h-BN shields an underlying MoS2 TMDC layer from the energetic argon plasmas that are routinely used during semiconductor device fabrication and post-processing. Aberration-corrected Scanning Transmission Electron Microscopy is used to analyze defect formation in both the h-BN and MoS2 layers, and these observations are correlated with Raman and photoluminescence spectroscopy. Our results highlight that h-BN is an effective barrier for short plasma exposures (< 30 secs) but is ineffective for longer exposures, which result in extensive knock-on damage and amorphization in the underlying MoS2. △ Less

Submitted 14 November, 2020; originally announced November 2020.

The Hyper-Kamiokande Experiment -- Snowmass LOI

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, L. H. V. Anthony, A. Araya, Y. Asaoka, V. Aushev, I. Bandac, M. Barbi, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, L. Bernard, E. Bernardini, L. Berns, S. Bhadra, J. Bian, A. Blanchet , et al. (366 additional authors not shown)

Abstract: Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiduc… ▽ More Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiducial volume make the detector unique, that is expected to acquire an unprecedented exposure of 3.8~Mton$\cdot$year over a period of 20~years of operation. Hyper-Kamiokande combines an extremely diverse science program including nucleon decays, long-baseline neutrino oscillations, atmospheric neutrinos, and neutrinos from astrophysical origins. The scientific scope of this program is highly complementary to liquid-argon detectors for example in sensitivity to nucleon decay channels or supernova detection modes. Hyper-Kamiokande construction has started in early 2020 and the experiment is expected to start operations in 2027. The Hyper-Kamiokande collaboration is presently being formed amongst groups from 19 countries including the United States, whose community has a long history of making significant contributions to the neutrino physics program in Japan. US physicists have played leading roles in the Kamiokande, Super-Kamiokande, EGADS, K2K, and T2K programs. △ Less

Submitted 1 September, 2020; originally announced September 2020.

Comments: 6 pages, prepared as Snowmass2021 LOI

The JSNS$^{2}$ data acquisition system

Authors: J. S. Park, S. Ajimura, M. Botran, M. K. Cheoun, J. H. Choi, T. Dodo, H. Furuta, P. Gwak, M. Harada, S. Hasegawa, Y. Hino, T. Hiraiwa, H. I. Jang, J. S. Jang, M. Jang, H. Jeon, S. Jeon, K. K. Joo, J. R. Jordan, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim, J. Y. Kim , et al. (36 additional authors not shown)

Abstract: The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for neutrino oscillations over a 24 m short baseline at J-PARC. The JSNS$^{2}$ inner detector is filled with 17 tons of gadolinium(Gd)-loaded liquid scintillator (LS) with an additional 31 tons of unloaded LS in the intermediate $γ$-catcher and an optically separated outer veto volumes. A… ▽ More The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for neutrino oscillations over a 24 m short baseline at J-PARC. The JSNS$^{2}$ inner detector is filled with 17 tons of gadolinium(Gd)-loaded liquid scintillator (LS) with an additional 31 tons of unloaded LS in the intermediate $γ$-catcher and an optically separated outer veto volumes. A total of 120 10-inch photomultiplier tubes observe the scintillating optical photons and each analog waveform is stored with the flash analog-to-digital converters. We present details of the data acquisition, processing, and data quality monitoring system. We also present two different trigger logics which are developed for the beam and self-trigger. △ Less

Submitted 31 May, 2020; originally announced June 2020.

Comments: 11 pages, 8 figures

Performance of PMTs for the JSNS2 experiment

Authors: J. S. Park, H. Furuta, T. Maruyama, S. Monjushiro, K. Nishikawa, M. Taira, J. S. Jang, K. K. Joo, J. Y. Kim, I. T. Lim, D. H. Moon, J. H. Seo, C. D. Shin, A. Zohaib, P. Gwak, M. Jang, S. Ajimura, T. Hiraiwa, T. Nakano, M. Nomachi, T. Shima, Y. Sugaya, M. K. Cheoun, J. H. Choi, M. Y. Pac , et al. (36 additional authors not shown)

Abstract: The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for neutrino oscillations over a 24\,m short baseline at J-PARC. The JSNS$^{2}$ inner detector is filled with 17 tons of gadolinium-loaded liquid scintillator (LS) and both the intermediate $γ$-catcher and the optically separated outer veto are filled with un-loaded LS. Optical photons fro… ▽ More The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for neutrino oscillations over a 24\,m short baseline at J-PARC. The JSNS$^{2}$ inner detector is filled with 17 tons of gadolinium-loaded liquid scintillator (LS) and both the intermediate $γ$-catcher and the optically separated outer veto are filled with un-loaded LS. Optical photons from scintillation are observed by 120 Photomultiplier Tubes (PMTs). A total of 130 PMTs for the JSNS2 experiment were both donated by other experiments and purchased from Hamamatsu. Donated PMTs were purchased around 10 years ago, therefore JSNS$^{2}$ did pre-calibration of the PMTs including the purchased PMTs. 123 PMTs demonstrated acceptable performance for the JSNS$^{2}$ experiment, and 120 PMTs were installed in the detector. △ Less

Submitted 25 May, 2020; v1 submitted 4 May, 2020; originally announced May 2020.

Slow control and monitoring system at the JSNS$^{2}$

Authors: J. S. Park, S. Ajimura, M. Botran, J. H. Choi, J. W. Choi, M. K. Cheoun, T. Dodo, H. Furuta, J. Goh, M. Harada, S. Hasegawa, Y. Hino, T. Hiraiwa, H. I. Jang, J. S. Jang, M. C. Jang, H. Jeon, S. Jeon, K. K. Joo, J. R. Jordan, D. E Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim , et al. (37 additional authors not shown)

Abstract: The JSNS$^2$ experiment is aimed to search for sterile neutrino oscillations using a neutrino beam from muon decays at rest. The JSNS$^2$ detector contains 17 tons of 0.1\% gadolinium (Gd) loaded liquid scintillator (LS) as a neutrino target. Detector construction was completed in the spring of 2020. A slow control and monitoring system (SCMS) was implemented for reliable control and quick monitor… ▽ More The JSNS$^2$ experiment is aimed to search for sterile neutrino oscillations using a neutrino beam from muon decays at rest. The JSNS$^2$ detector contains 17 tons of 0.1\% gadolinium (Gd) loaded liquid scintillator (LS) as a neutrino target. Detector construction was completed in the spring of 2020. A slow control and monitoring system (SCMS) was implemented for reliable control and quick monitoring of the detector operational status and environmental conditions. It issues an alarm if any of the monitored parameters exceed a preset acceptable range. The SCMS monitors the high voltage (HV) of the photomultiplier tubes (PMTs), the LS level in the detector, possible LS overflow and leakage, the temperature and air pressure in the detector, the humidity of the experimental hall, and the LS flow rate during filling and extraction. An initial 10 days of data-taking with a neutrino beam was done following a successful commissioning of the detector and SCMS in June 2020. In this paper, we present a description of the assembly and installation of the SCMS and its performance. △ Less

Submitted 7 April, 2021; v1 submitted 4 May, 2020; originally announced May 2020.

Comments: 12 pages, 11 figures

A compact high-precision periodic-error-free heterodyne interferometer

Authors: Ki-Nam Joo, Erin Clark, Yanqi Zhang, Jonathan D. Ellis, Felipe Guzman

Abstract: We present the design, bench-top setup, and experimental results of a compact heterodyne interferometer that achieves picometer-level displacement sensitivities in air over frequencies above 100 mHz. The optical configuration with spatially separated beams prevents frequency and polarization mixing, and therefore eliminates periodic errors. The interferometer is designed to maximize common-mode op… ▽ More We present the design, bench-top setup, and experimental results of a compact heterodyne interferometer that achieves picometer-level displacement sensitivities in air over frequencies above 100 mHz. The optical configuration with spatially separated beams prevents frequency and polarization mixing, and therefore eliminates periodic errors. The interferometer is designed to maximize common-mode optical laser beam paths to obtain high rejection of environmental disturbances, such as temperature fluctuations and acoustics. The results of our experiments demonstrate the short- and long-term stabilities of the system during stationary and dynamic measurements. In addition, we provide measurements that compare our interferometer prototype with a commercial system, verifying our higher sensitivity of 3\,pm, higher thermal stability by a factor of two, and periodic-error-free performance. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Gate-Tunable Semiconductor Heterojunctions from 2D/3D van der Waals Interfaces

Authors: **shui Miao, Xiwen Liu, Kiyoung Jo, Kang He, Ravindra Saxena, Baokun Song, Huiqin Zhang, Jiale He, Myung-Geun Han, Weida Hu, Deep Jariwala

Abstract: Van der Waals (vdW) semiconductors are attractive for highly scaled devices and heterogeneous integration since they can be isolated into self-passivated, two-dimensional (2D) layers that enable superior electrostatic control. These attributes have led to numerous demonstrations of field-effect devices ranging from transistors to triodes. By exploiting the controlled, substitutional do** schemes… ▽ More Van der Waals (vdW) semiconductors are attractive for highly scaled devices and heterogeneous integration since they can be isolated into self-passivated, two-dimensional (2D) layers that enable superior electrostatic control. These attributes have led to numerous demonstrations of field-effect devices ranging from transistors to triodes. By exploiting the controlled, substitutional do** schemes in covalently-bonded, three-dimensional (3D) semiconductors and the passivated surfaces of 2D semiconductors, one can construct devices that can exceed performance metrics of 'all-2D' vdW heterojunctions. Here, we demonstrate, 2D/3D semiconductor heterojunctions using MoS2 as the prototypical 2D semiconductor laid upon Si and GaN as the 3D semiconductor layers. By tuning the Fermi levels in MoS2, we demonstrate devices that concurrently exhibit over seven orders of magnitude modulation in rectification ratios and conductance. Our results further suggest that the interface quality does not necessarily affect Fermi-level tuning at the junction opening up possibilities for novel 2D/3D heterojunction device architectures. △ Less

Submitted 22 March, 2020; originally announced March 2020.

Comments: Manuscript plus supporting information, 4 Figures

Journal ref: Nano Letters 2020

Hybrid Exciton-Plasmon-Polaritons in van der Waals Semiconductor Gratings

Authors: Huiqin Zhang, Bhaskar Abhiraman, Qing Zhang, **shui Miao, Kiyoung Jo, Stefano Roccasecca, Mark W. Knight, Artur R. Davoyan, Deep Jariwala

Abstract: Van der Waals materials and heterostructures manifesting strongly bound room temperature exciton states exhibit emergent physical phenomena and are of a great promise for optoelectronic applications. Here, we demonstrate that nanostructured multilayer transition metal dichalcogenides by themselves provide an ideal platform for excitation and control of excitonic modes, paving the way to exciton-ph… ▽ More Van der Waals materials and heterostructures manifesting strongly bound room temperature exciton states exhibit emergent physical phenomena and are of a great promise for optoelectronic applications. Here, we demonstrate that nanostructured multilayer transition metal dichalcogenides by themselves provide an ideal platform for excitation and control of excitonic modes, paving the way to exciton-photonics. Hence, we show that by patterning the TMDCs into nanoresonators, strong dispersion and avoided crossing of excitons and hybrid polaritons with interaction potentials exceeding 410 meV may be controlled with great precision. We further observe that inherently strong TMDC exciton absorption resonances may be completely suppressed due to excitation of hybrid photon states and their interference. Our work paves the way to a next generation of integrated exciton optoelectronic nano-devices and applications in light generation, computing, and sensing. △ Less

Submitted 31 December, 2019; originally announced December 2019.

Comments: 5 figures in manuscript

Observation of Reactor Antineutrino Disappearance Using Delayed Neutron Capture on Hydrogen at RENO

Authors: C. D. Shin, Zohaib Atif, G. Bak, J. H. Choi, H. I. Jang, J. S. Jang, S. H. Jeon, K. K. Joo, K. Ju, D. E. Jung, J. G. Kim, J. Y. Kim, S. B. Kim, S. Y. Kim, W. Kim, E. Kwon, D. H. Lee, H. G. Lee, Y. C. Lee, I. T. Lim, D. H. Moon, M. Y. Pac, C. Rott, H. Seo, J. H. Seo , et al. (6 additional authors not shown)

Abstract: The Reactor Experiment for Neutrino Oscillation (RENO) experiment has been taking data using two identical liquid scintillator detectors of 44.5 tons since August 2011. The experiment has observed the disappearance of reactor neutrinos in their interactions with free protons, followed by neutron capture on hydrogen. Based on 1500 live days of data taken with 16.8 GW$_{th}$ reactors at the Hanbit N… ▽ More The Reactor Experiment for Neutrino Oscillation (RENO) experiment has been taking data using two identical liquid scintillator detectors of 44.5 tons since August 2011. The experiment has observed the disappearance of reactor neutrinos in their interactions with free protons, followed by neutron capture on hydrogen. Based on 1500 live days of data taken with 16.8 GW$_{th}$ reactors at the Hanbit Nuclear Power Plant in Korea, the near (far) detector observes 567690 (90747) electron antineutrino candidate events with a delayed neutron capture on hydrogen. This provides an independent measurement of $θ_{13}$ and a consistency check on the validity of the result from n-Gd data. Furthermore, it provides an important cross-check on the systematic uncertainties of the n-Gd measurement. Based on a rate-only analysis, we obtain sin$^{2}$2$θ_{13}$= 0.087 $\pm$ 0.008 (stat.) $\pm$ 0.014 (syst.). △ Less

Submitted 11 November, 2019; originally announced November 2019.

Comments: 26 pages, 19 figures, 6 tables

Anti-electron Neutrino Event Selection from Backgrounds Based on Machine Learning

Authors: Chang Dong Shin, Kyung Kwang Joo, Dong Ho Moon, June Ho Choi, Myoung Youl Pac, Junghwan Goh

Abstract: For reactor neutrino experiments including the next--generation experiments will be adopting the liquid scintillator technique, criteria and time to select neutrino--induced inverse beta decay events from the background events need to be established. For higher performance efficiency, we investigated the results of applying a machine learning technique embedded in a standard ROOT package to select… ▽ More For reactor neutrino experiments including the next--generation experiments will be adopting the liquid scintillator technique, criteria and time to select neutrino--induced inverse beta decay events from the background events need to be established. For higher performance efficiency, we investigated the results of applying a machine learning technique embedded in a standard ROOT package to select IBD signals. To obtain a higher statistics, the signals and background events in a gadolinium-loaded liquid scintillation detector were reproduced by Monte Carlo simulation. We report the efficiencies of neutrino--induced $n-H$ and $n-Gd$ events selection using the machine learning technique. △ Less

Submitted 12 July, 2019; originally announced July 2019.

Comments: 9 pages, 9 figures

Production and optical properties of liquid scintillator for the JSNS$^{2}$ experiment

Authors: J. S. Park, S. Y. Kim, C. Rott, D. H. Lee, D. Jung, F. Suekane, H. Furuta, H. I. Jang, H. K. Jeon, I. Yu, J. H. Choi, J. S. Jang, K. K. Joo, K. W. Ju, M. Pac, P. J. Gwak, S. B. Kim, S. Hasegawa, S. H. Jeon, T. Maruyama, R. Ujiie, Y. Hino, Y. S. Park

Abstract: The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment will search for neutrino oscillations over a 24 m short baseline at J-PARC. The JSNS$^{2}$ inner detector will be filled with 17 tons of gadolinium-loaded liquid scintillator (LS) with an additional 31 tons of unloaded LS in the intermediate $γ$-catcher and outer veto volumes. JSNS$^{2}$ has chosen Linea… ▽ More The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment will search for neutrino oscillations over a 24 m short baseline at J-PARC. The JSNS$^{2}$ inner detector will be filled with 17 tons of gadolinium-loaded liquid scintillator (LS) with an additional 31 tons of unloaded LS in the intermediate $γ$-catcher and outer veto volumes. JSNS$^{2}$ has chosen Linear Alkyl Benzene (LAB) as an organic solvent because of its chemical properties. The unloaded LS was produced at a refurbished facility, originally used for scintillator production by the RENO experiment. JSNS$^{2}$ plans to use ISO tanks for the storage and transportation of the LS. In this paper, we describe the LS production, and present measurements of its optical properties and long term stability. Our measurements show that storing the LS in ISO tanks does not result in degradation of its optical properties. △ Less

Submitted 5 May, 2020; v1 submitted 1 June, 2019; originally announced June 2019.

Comments: 7 pages, 4 figures,

Hyper-Kamiokande Design Report

Authors: Hyper-Kamiokande Proto-Collaboration, :, K. Abe, Ke. Abe, H. Aihara, A. Aimi, R. Akutsu, C. Andreopoulos, I. Anghel, L. H. V. Anthony, M. Antonova, Y. Ashida, V. Aushev, M. Barbi, G. J. Barker, G. Barr, P. Beltrame, V. Berardi, M. Bergevin, S. Berkman, L. Berns, T. Berry, S. Bhadra, D. Bravo-Berguño, F. d. M. Blaszczyk , et al. (291 additional authors not shown)

Abstract: On the strength of a double Nobel prize winning experiment (Super)Kamiokande and an extremely successful long baseline neutrino programme, the third generation Water Cherenkov detector, Hyper-Kamiokande, is being developed by an international collaboration as a leading worldwide experiment based in Japan. The Hyper-Kamiokande detector will be hosted in the Tochibora mine, about 295 km away from th… ▽ More On the strength of a double Nobel prize winning experiment (Super)Kamiokande and an extremely successful long baseline neutrino programme, the third generation Water Cherenkov detector, Hyper-Kamiokande, is being developed by an international collaboration as a leading worldwide experiment based in Japan. The Hyper-Kamiokande detector will be hosted in the Tochibora mine, about 295 km away from the J-PARC proton accelerator research complex in Tokai, Japan. The currently existing accelerator will be steadily upgraded to reach a MW beam by the start of the experiment. A suite of near detectors will be vital to constrain the beam for neutrino oscillation measurements. A new cavern will be excavated at the Tochibora mine to host the detector. The experiment will be the largest underground water Cherenkov detector in the world and will be instrumented with new technology photosensors, faster and with higher quantum efficiency than the ones in Super-Kamiokande. The science that will be developed will be able to shape the future theoretical framework and generations of experiments. Hyper-Kamiokande will be able to measure with the highest precision the leptonic CP violation that could explain the baryon asymmetry in the Universe. The experiment also has a demonstrated excellent capability to search for proton decay, providing a significant improvement in discovery sensitivity over current searches for the proton lifetime. The atmospheric neutrinos will allow to determine the neutrino mass ordering and, together with the beam, able to precisely test the three-flavour neutrino oscillation paradigm and search for new phenomena. A strong astrophysical programme will be carried out at the experiment that will detect supernova neutrinos and will measure precisely solar neutrino oscillation. △ Less

Submitted 28 November, 2018; v1 submitted 9 May, 2018; originally announced May 2018.

Comments: 325 pages

Extreme events and their optimal mitigation in nonlinear structural systems excited by stochastic loads: Application to ocean engineering systems

Authors: Han Kyul Joo, Mustafa A. Mohamad, Themistoklis P. Sapsis

Abstract: We develop an efficient numerical method for the probabilistic quantification of the response statistics of nonlinear multi-degree-of-freedom structural systems under extreme forcing events, emphasizing accurate heavy-tail statistics. The response is decomposed to a statistically stationary part and an intermittent component. The stationary part is quantified using a statistical linearization meth… ▽ More We develop an efficient numerical method for the probabilistic quantification of the response statistics of nonlinear multi-degree-of-freedom structural systems under extreme forcing events, emphasizing accurate heavy-tail statistics. The response is decomposed to a statistically stationary part and an intermittent component. The stationary part is quantified using a statistical linearization method while the intermittent part, associated with extreme transient responses, is quantified through i) either a few carefully selected simulations or ii) through the use of effective measures (effective stiffness and dam**). The developed approach is able to accurately capture the extreme response statistics orders of magnitude faster compared with direct methods. The scheme is applied to the design and optimization of small attachments that can mitigate and suppress extreme forcing events delivered to a primary structural system. Specifically, we consider the problem of suppression of extreme responses in two prototype ocean engineering systems. First, we consider linear and cubic springs and perform parametric optimization by minimizing the forth-order moments of the response. We then consider a more generic, possibly asymmetric, piecewise linear spring and optimize its nonlinear characteristics. The resulting asymmetric spring design far outperforms the optimal cubic energy sink and the linear tuned mass dampers. △ Less

Submitted 1 June, 2017; originally announced June 2017.

Technical Design Report (TDR): Searching for a Sterile Neutrino at J-PARC MLF (E56, JSNS2)

Authors: S. Ajimura, M. K. Cheoun, J. H. Choi, H. Furuta, M. Harada, S. Hasegawa, Y. Hino, T. Hiraiwa, E. Iwai, S. Iwata, J. S. Jang, H. I. Jang, K. K. Joo, J. Jordan, S. K. Kang, T. Kawasaki, Y. Kasugai, E. J. Kim, J. Y. Kim, S. B. Kim, W. Kim, K. Kuwata, E. Kwon, I. T. Lim, T. Maruyama , et al. (28 additional authors not shown)

Abstract: In this document, the technical details of the JSNS$^2$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment are described. The search for sterile neutrinos is currently one of the hottest topics in neutrino physics. The JSNS$^2$ experiment aims to search for the existence of neutrino oscillations with $Δm^2$ near 1 eV$^2$ at the J-PARC Materials and Life Science Exper… ▽ More In this document, the technical details of the JSNS$^2$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment are described. The search for sterile neutrinos is currently one of the hottest topics in neutrino physics. The JSNS$^2$ experiment aims to search for the existence of neutrino oscillations with $Δm^2$ near 1 eV$^2$ at the J-PARC Materials and Life Science Experimental Facility (MLF). A 1 MW beam of 3 GeV protons incident on a spallation neutron target produces an intense neutrino beam from muon decay at rest. Neutrinos come predominantly from $μ^+$ decay: $μ^{+} \to e^{+} + \barν_μ + ν_{e}$. The experiment will search for $\barν_μ$ to $\barν_{e}$ oscillations which are detected by the inverse beta decay interaction $\barν_{e} + p \to e^{+} + n$, followed by gammas from neutron capture on Gd. The detector has a fiducial volume of 17 tons and is located 24 meters away from the mercury target. JSNS$^2$ offers the ultimate direct test of the LSND anomaly. In addition to the sterile neutrino search, the physics program includes cross section measurements with neutrinos with a few 10's of MeV from muon decay at rest and with monochromatic 236 MeV neutrinos from kaon decay at rest. These cross sections are relevant for our understanding of supernova explosions and nuclear physics. △ Less

Submitted 24 May, 2017; originally announced May 2017.

Physics Potentials with the Second Hyper-Kamiokande Detector in Korea

Authors: Hyper-Kamiokande proto-collaboration, :, K. Abe, Ke. Abe, S. H. Ahn, H. Aihara, A. Aimi, R. Akutsu, C. Andreopoulos, I. Anghel, L. H. V. Anthony, M. Antonova, Y. Ashida, V. Aushev, M. Barbi, G. J. Barker, G. Barr, P. Beltrame, V. Berardi, M. Bergevin, S. Berkman, L. Berns, T. Berry, S. Bhadra, D. Bravo-Bergu no , et al. (331 additional authors not shown)

Abstract: Hyper-Kamiokande consists of two identical water-Cherenkov detectors of total 520~kt with the first one in Japan at 295~km from the J-PARC neutrino beam with 2.5$^{\textrm{o}}$ Off-Axis Angles (OAAs), and the second one possibly in Korea in a later stage. Having the second detector in Korea would benefit almost all areas of neutrino oscillation physics mainly due to longer baselines. There are sev… ▽ More Hyper-Kamiokande consists of two identical water-Cherenkov detectors of total 520~kt with the first one in Japan at 295~km from the J-PARC neutrino beam with 2.5$^{\textrm{o}}$ Off-Axis Angles (OAAs), and the second one possibly in Korea in a later stage. Having the second detector in Korea would benefit almost all areas of neutrino oscillation physics mainly due to longer baselines. There are several candidate sites in Korea with baselines of 1,000$\sim$1,300~km and OAAs of 1$^{\textrm{o}}$$\sim$3$^{\textrm{o}}$. We conducted sensitivity studies on neutrino oscillation physics for a second detector, either in Japan (JD $\times$ 2) or Korea (JD + KD) and compared the results with a single detector in Japan. Leptonic CP violation sensitivity is improved especially when the CP is non-maximally violated. The larger matter effect at Korean candidate sites significantly enhances sensitivities to non-standard interactions of neutrinos and mass ordering determination. Current studies indicate the best sensitivity is obtained at Mt. Bisul (1,088~km baseline, $1.3^\circ$ OAA). Thanks to a larger (1,000~m) overburden than the first detector site, clear improvements to sensitivities for solar and supernova relic neutrino searches are expected. △ Less

Submitted 26 March, 2018; v1 submitted 18 November, 2016; originally announced November 2016.

Comments: 102 pages, 49 figures. Accepted by PTEP

Journal ref: Prog Theor Exp Phys (2018)

Heavy-tailed response of structural systems subjected to stochastic excitation containing extreme forcing events

Authors: Han Kyul Joo, Mustafa A. Mohamad, Themistoklis P. Sapsis

Abstract: We characterize the complex, heavy-tailed probability distribution functions (pdf) describing the response and its local extrema for structural systems subjected to random forcing that includes extreme events. Our approach is based on the recent probabilistic decomposition-synthesis technique, where we decouple rare events regimes from the background fluctuations. The result of the analysis has th… ▽ More We characterize the complex, heavy-tailed probability distribution functions (pdf) describing the response and its local extrema for structural systems subjected to random forcing that includes extreme events. Our approach is based on the recent probabilistic decomposition-synthesis technique, where we decouple rare events regimes from the background fluctuations. The result of the analysis has the form of a semi-analytical approximation formula for the pdf of the response (displacement, velocity, and acceleration) and the pdf of the local extrema. For special limiting cases (lightly damped or heavily damped systems) our analysis provides fully analytical approximations. We also demonstrate how the method can be applied to high dimensional structural systems through a two-degrees-of-freedom structural system undergoing rare events due to intermittent forcing. The derived formulas can be evaluated with very small computational cost and are shown to accurately capture the complicated heavy-tailed and asymmetrical features in the probability distribution many standard deviations away from the mean, through comparisons with expensive Monte-Carlo simulations. △ Less

Submitted 31 May, 2017; v1 submitted 19 October, 2016; originally announced October 2016.

Sterile neutrino search at NEOS Experiment

Authors: Y. J. Ko, B. R. Kim, J. Y. Kim, B. Y. Han, C. H. Jang, E. J. Jeon, K. K. Joo, H. J. Kim, H. S. Kim, Y. D. Kim, Jaison Lee, J. Y. Lee, M. H. Lee, Y. M. Oh, H. K. Park, H. S. Park, K. S. Park, K. M. Seo, Kim Siyeon, G. M. Sun

Abstract: An experiment to search for light sterile neutrinos was conducted at a reactor with a thermal power of 2.8 GW located at the Hanbit nuclear power complex. The search was done with a detector consisting of a ton of Gd-loaded liquid scintillator in a tendon gallery approximately 24 m from the reactor core. The measured antineutrino event rate is 1976 per day with a signal to background ratio of abou… ▽ More An experiment to search for light sterile neutrinos was conducted at a reactor with a thermal power of 2.8 GW located at the Hanbit nuclear power complex. The search was done with a detector consisting of a ton of Gd-loaded liquid scintillator in a tendon gallery approximately 24 m from the reactor core. The measured antineutrino event rate is 1976 per day with a signal to background ratio of about 22. The shape of the antineutrino energy spectrum obtained from eight-month data-taking period is compared with a hypothesis of oscillations due to active-sterile antineutrino mixing. It is found to be consistent with no oscillation. An excess around 5 MeV prompt energy range is observed as seen in existing longer baseline experiments. The parameter space of $\sin^{2}2θ_{14}$ down below 0.1 for $Δm^{2}_{41}$ ranging from 0.2 eV$^{2}$ to 2.3 eV$^{2}$ and the optimum point for the previously reported reactor antineutrino anomaly are excluded with a confidence level higher than 90%. △ Less

Submitted 21 March, 2017; v1 submitted 17 October, 2016; originally announced October 2016.

Comments: 6 pages, 4 figures. 1 supplemental material (Fig. S1). Version published in Physical Review Letters

Journal ref: Phys. Rev. Lett. 118, 121802 (2017)

Measurement of Fast Neutron Rate for NEOS Experiment

Authors: Y. J. Ko, J. Y. Kim, B. Y. Han, C. H. Jang, E. J. Jeon, K. K. Joo, B. R. Kim, H. J. Kim, H. S. Kim, Y. D. Kim, Jaison Lee, J. Y. Lee, M. H. Lee, Y. M. Oh, H. K. Park, H. S. Park, K. S. Park, K. M. Seo, Kim Siyeon, G. M. Sun

Abstract: The fast neutron rate is measured at the site of NEOS experiment, a short baseline neutrino experiment located in a tendon gallery of a commercial nuclear power plant, using a 0.78-liter liquid scintillator detector. A pulse shape discrimination technique is used to identify neutron signals. The measurements are performed during the nuclear reactor-on and off periods and found to be ~20 per day fo… ▽ More The fast neutron rate is measured at the site of NEOS experiment, a short baseline neutrino experiment located in a tendon gallery of a commercial nuclear power plant, using a 0.78-liter liquid scintillator detector. A pulse shape discrimination technique is used to identify neutron signals. The measurements are performed during the nuclear reactor-on and off periods and found to be ~20 per day for both periods. The fast neutron rate is also measured at an overground site with a negligible overburden and is found to be ~100 times higher than that at the NEOS experiment site. △ Less

Submitted 17 October, 2016; originally announced October 2016.

Comments: To be submitted to JKPS

Spectral Measurement of the Electron Antineutrino Oscillation Amplitude and Frequency using 500 Live Days of RENO Data

Authors: S. H. Seo, W. Q. Choi, H. Seo, J. H. Choi, Y. Choi, H. I. Jang, J. S. Jang, K. K. Joo, B. R. Kim, H. S. Kim, J. Y. Kim, S. B. Kim, S. Y. Kim, W. Kim, E. Kwon, D. H. Lee, Y. C. Lee, I. T. Lim, M. Y. Pac, I. G. Park, J. S. Park, R. G. Park, Y. G. Seon, C. D. Shin, J. H. Yang , et al. (3 additional authors not shown)

Abstract: The Reactor Experiment for Neutrino Oscillation (RENO) has been taking electron antineutrino ($\overlineν_{e}$) data from the reactors in Yonggwang, Korea, using two identical detectors since August 2011. Using roughly 500 live days of data through January 2013 we observe 290,775 (31,514) reactor $\overlineν_{e}$ candidate events with 2.8 (4.9)% background in the near (far) detector. The observed… ▽ More The Reactor Experiment for Neutrino Oscillation (RENO) has been taking electron antineutrino ($\overlineν_{e}$) data from the reactors in Yonggwang, Korea, using two identical detectors since August 2011. Using roughly 500 live days of data through January 2013 we observe 290,775 (31,514) reactor $\overlineν_{e}$ candidate events with 2.8 (4.9)% background in the near (far) detector. The observed visible positron spectra from the reactor $\overlineν_{e}$ events in both detectors show discrepancy around 5 MeV with regard to the prediction from the current reactor $\overlineν_{e}$ model. Based on a far-to-near ratio measurement using the spectral and rate information we have obtained $\sin^2 2 θ_{13} = 0.082 \pm 0.009({\rm stat.}) \pm 0.006({\rm syst.})$ and $|Δm_{ee}^2| =[2.62_{-0.23}^{+0.21}({\rm stat.})_{-0.13}^{+0.12}({\rm syst.})]\times 10^{-3}$eV$^2$. △ Less

Submitted 16 May, 2018; v1 submitted 14 October, 2016; originally announced October 2016.

Comments: 24 pages, 30 figures. Submitted to PRD. Total detection efficiency change from 76.44% to 76.47%. Some modifications of text to improve readability and clarification of the paper

Journal ref: Phys. Rev. D 98, 012002 (2018)

In-Situ Measurement of Relative Attenuation Length of Gadolinium-Loaded Liquid Scintillator Using Source Data at RENO Experiment

Authors: H. S. Kim, S. Y. Kim, J. H. Choi, W. Q. Choi, Y. Choi, H. I. Jang, J. S. Jang, K. K. Joo, B. R. Kim, J. Y. Kim, S. B. Kim, W. Kim, E. Kwon, D. H. Lee, I. T. Lim, M. Y. Pac, I. G. Park, J. S. Park, R. G. Park, H. Seo, S. H. Seo, Y. G. Seon, C. D. Shin, I. S. Yeo, I. Yu

Abstract: We present in situ measurements of the relative attenuation length of the gadolinium loaded liquid scintillator in the RENO (Reactor Experiment Neutrino Oscillation) detectors using radioactive source calibration data. We observed a steady decrease in the attenuation length of the Gd-LS in the RENO detectors by 50% in about four years since the commissioning of the detectors. We present in situ measurements of the relative attenuation length of the gadolinium loaded liquid scintillator in the RENO (Reactor Experiment Neutrino Oscillation) detectors using radioactive source calibration data. We observed a steady decrease in the attenuation length of the Gd-LS in the RENO detectors by 50% in about four years since the commissioning of the detectors. △ Less

Submitted 22 May, 2023; v1 submitted 29 September, 2016; originally announced September 2016.

Comments: 11 pages, 5 figures

Development and Mass Production of a Mixture of LAB- and DIN-based Gadolinium-loaded Liquid Scintillator for the NEOS Short-baseline Neutrino Experiment

Authors: Ba Ro Kim, Boyoung Han, Eun-ju Jeon, Kyung Kwang Joo, H. J. Kim, Hyunsoo Kim, **yu Kim, Yeongduk Kim, Youngju Ko, Jaison Lee, Jooyoung Lee, Moohyun Lee, Kyungju Ma, Yoomin Oh, Hyangkyu Park, Kang-soon Park, Kyungmin Seo, Gwang-Min Seon, Kim Siyeon

Abstract: A new experiment, which is called as NEOS (NEutrino Oscillation at Short baseline), is proposed on the site of Hanbit reactors at Yonggwang, South Korea, to investigate a reactor antineutrino anomaly. A homogeneous NEOS detector having a 1000-L target volume has been constructed and deployed at the tendon gallery ~25 m away from the reactor core. A linear alkylbenzene (LAB) is used as a main base… ▽ More A new experiment, which is called as NEOS (NEutrino Oscillation at Short baseline), is proposed on the site of Hanbit reactors at Yonggwang, South Korea, to investigate a reactor antineutrino anomaly. A homogeneous NEOS detector having a 1000-L target volume has been constructed and deployed at the tendon gallery ~25 m away from the reactor core. A linear alkylbenzene (LAB) is used as a main base solvent of the NEOS detector. Furthermore, a di-isopropylnaphthalene (DIN) is added to improve the light output and pulse shape discrimination (PSD) ability. The ratio of LAB to DIN is 90:10. PPO (3 g/L) and bis-MSB (30 mg/L) are dissolved to formulate the mixture of LAB- and DIN-based liquid scintillator (LS). Then, ~0.5% gadolinium (Gd) is loaded into the LS by using the solvent-solvent extraction technique. In this paper, we report the characteristics of Gd-loaded LS (GdLS) for the NEOS detector and the handling during mass production. △ Less

Submitted 16 November, 2015; originally announced November 2015.

A Long Baseline Neutrino Oscillation Experiment Using J-PARC Neutrino Beam and Hyper-Kamiokande

Authors: Hyper-Kamiokande Working Group, :, K. Abe, H. Aihara, C. Andreopoulos, I. Anghel, A. Ariga, T. Ariga, R. Asfandiyarov, M. Askins, J. J. Back, P. Ballett, M. Barbi, G. J. Barker, G. Barr, F. Bay, P. Beltrame, V. Berardi, M. Bergevin, S. Berkman, T. Berry, S. Bhadra, F. d. M. Blaszczyk, A. Blondel, S. Bolognesi , et al. (224 additional authors not shown)

Abstract: Hyper-Kamiokande will be a next generation underground water Cherenkov detector with a total (fiducial) mass of 0.99 (0.56) million metric tons, approximately 20 (25) times larger than that of Super-Kamiokande. One of the main goals of Hyper-Kamiokande is the study of $CP$ asymmetry in the lepton sector using accelerator neutrino and anti-neutrino beams. In this document, the physics potential o… ▽ More Hyper-Kamiokande will be a next generation underground water Cherenkov detector with a total (fiducial) mass of 0.99 (0.56) million metric tons, approximately 20 (25) times larger than that of Super-Kamiokande. One of the main goals of Hyper-Kamiokande is the study of $CP$ asymmetry in the lepton sector using accelerator neutrino and anti-neutrino beams. In this document, the physics potential of a long baseline neutrino experiment using the Hyper-Kamiokande detector and a neutrino beam from the J-PARC proton synchrotron is presented. The analysis has been updated from the previous Letter of Intent [K. Abe et al., arXiv:1109.3262 [hep-ex]], based on the experience gained from the ongoing T2K experiment. With a total exposure of 7.5 MW $\times$ 10$^7$ sec integrated proton beam power (corresponding to $1.56\times10^{22}$ protons on target with a 30 GeV proton beam) to a $2.5$-degree off-axis neutrino beam produced by the J-PARC proton synchrotron, it is expected that the $CP$ phase $δ_{CP}$ can be determined to better than 19 degrees for all possible values of $δ_{CP}$, and $CP$ violation can be established with a statistical significance of more than $3\,σ$ ($5\,σ$) for $76%$ ($58%$) of the $δ_{CP}$ parameter space. △ Less

Submitted 18 January, 2015; v1 submitted 15 December, 2014; originally announced December 2014.

Comments: Document submitted to 18th J-PARC PAC meeting in May 2014. 50 pages, 41 figures