-
A microwave photonic prototype for concurrent radar detection and spectrum sensing over an 8 to 40 GHz bandwidth
Authors:
Taixia Shi,
Dingding Liang,
Lu Wang,
Lin Li,
Shaogang Guo,
Jiawei Gao,
Xiaowei Li,
Chulun Lin,
Lei Shi,
Baogang Ding,
Shiyang Liu,
Fangyi Yang,
Chi Jiang,
Yang Chen
Abstract:
In this work, a microwave photonic prototype for concurrent radar detection and spectrum sensing is proposed, designed, built, and investigated. A direct digital synthesizer and an analog electronic circuit are integrated to generate an intermediate frequency (IF) linearly frequency-modulated (LFM) signal with a tunable center frequency from 2.5 to 9.5 GHz and an instantaneous bandwidth of 1 GHz.…
▽ More
In this work, a microwave photonic prototype for concurrent radar detection and spectrum sensing is proposed, designed, built, and investigated. A direct digital synthesizer and an analog electronic circuit are integrated to generate an intermediate frequency (IF) linearly frequency-modulated (LFM) signal with a tunable center frequency from 2.5 to 9.5 GHz and an instantaneous bandwidth of 1 GHz. The IF LFM signal is converted to the optical domain via an intensity modulator and then filtered by a fiber Bragg grating (FBG) to generate only two 2nd-order optical LFM sidebands. In radar detection, the two optical LFM sidebands beat with each other to generate a frequency-and-bandwidth-quadrupled LFM signal, which is used for ranging, radial velocity measurement, and imaging. By changing the center frequency of the IF LFM signal, the radar function can be operated within 8 to 40 GHz. In spectrum sensing, one 2nd-order optical LFM sideband is selected by another FBG, which then works in conjunction with the stimulated Brillouin scattering gain spectrum to map the frequency of the signal under test to time with an instantaneous measurement bandwidth of 2 GHz. By using a frequency shift module to adjust the pump frequency, the frequency measurement range can be adjusted from 0 to 40 GHz. The prototype is comprehensively studied and tested, which is capable of achieving a range resolution of 3.75 cm, a range error of less than $\pm$ 2 cm, a radial velocity error within $\pm$ 1 cm/s, delivering clear imaging of multiple small targets, and maintaining a frequency measurement error of less than $\pm$ 7 MHz and a frequency resolution of better than 20 MHz.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
BUFF: Boosted Decision Tree based Ultra-Fast Flow matching
Authors:
Cheng Jiang,
Sitian Qian,
Huilin Qu
Abstract:
Tabular data stands out as one of the most frequently encountered types in high energy physics. Unlike commonly homogeneous data such as pixelated images, simulating high-dimensional tabular data and accurately capturing their correlations are often quite challenging, even with the most advanced architectures. Based on the findings that tree-based models surpass the performance of deep learning mo…
▽ More
Tabular data stands out as one of the most frequently encountered types in high energy physics. Unlike commonly homogeneous data such as pixelated images, simulating high-dimensional tabular data and accurately capturing their correlations are often quite challenging, even with the most advanced architectures. Based on the findings that tree-based models surpass the performance of deep learning models for tasks specific to tabular data, we adopt the very recent generative modeling class named conditional flow matching and employ different techniques to integrate the usage of Gradient Boosted Trees. The performances are evaluated for various tasks on different analysis level with several public datasets. We demonstrate the training and inference time of most high-level simulation tasks can achieve speedup by orders of magnitude. The application can be extended to low-level feature simulation and conditioned generations with competitive performance.
△ Less
Submitted 28 April, 2024;
originally announced April 2024.
-
Revisiting Seismicity Criticality: A New Framework for Bias Correction of Statistical Seismology Model Calibrations
Authors:
Jiawei Li,
Didier Sornette,
Zhongliang Wu,
Jiancang Zhuang,
Changsheng Jiang
Abstract:
The Epidemic-Type Aftershock Sequences (ETAS) model and its variants effectively capture the space-time clustering of seismicity, setting the standard for earthquake forecasting. Accurate unbiased ETAS calibration is thus crucial. But we identify three sources of bias, (i) boundary effects, (ii) finite-size effects, and (iii) censorship, which are often overlooked or misinterpreted, causing errors…
▽ More
The Epidemic-Type Aftershock Sequences (ETAS) model and its variants effectively capture the space-time clustering of seismicity, setting the standard for earthquake forecasting. Accurate unbiased ETAS calibration is thus crucial. But we identify three sources of bias, (i) boundary effects, (ii) finite-size effects, and (iii) censorship, which are often overlooked or misinterpreted, causing errors in seismic analysis and predictions. By employing an ETAS model variant with variable spatial background rates, we propose a method to correct for these biases, focusing on the branching ratio n, a key indicator of earthquake triggering potential. Our approach quantifies the variation in the apparent branching ratio (napp) with increased cut-off magnitude (Mco) above the optimal cut-off (Mcobest). The napp(Mco) function yields insights superior to traditional point estimates. We validate our method using synthetic earthquake catalogs, accurately recovering the true branching ratio (ntrue) after correcting biases with napp(Mco). Additionally, our method introduces a refined estimation of the minimum triggering magnitude (m0), a crucial parameter in the ETAS model. Applying our framework to the earthquake catalogs of California, New Zealand, and the China Seismic Experimental Site (CSES) in Sichuan and Yunnan provinces, we find that seismicity hovers away from the critical point, nc = 1, remaining distinctly subcritical, however with values tending to be larger than recent reports that do not consider the above biases. It is interesting that, m0 is found around 4 for California, 3 for New Zealand and 2 for CSES, suggesting that many small triggered earthquakes may not be fertile. Understanding seismicity's critical state significantly enhances our comprehension of seismic patterns, aftershock predictability, and informs earthquake risk mitigation and management strategies.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
A Model of Solar Magnetic Flux Rope Eruption Initiated Primarily by Magnetic Reconnection
Authors:
Qingjun Liu,
Chaowei Jiang,
Xinkai Bian,
Xueshang Feng,
**bing Zuo,
Yi Wang
Abstract:
There is a heated debate regarding the specific roles played by ideal magnetohydrodynamic (MHD) instability and magnetic reconnection in the causes of solar eruptions. In the context with a pre-existing magnetic flux rope (MFR) before an eruption, it is widely believed that an ideal MHD instability, in particular, the torus instability, is responsible for triggering and driving the eruption, while…
▽ More
There is a heated debate regarding the specific roles played by ideal magnetohydrodynamic (MHD) instability and magnetic reconnection in the causes of solar eruptions. In the context with a pre-existing magnetic flux rope (MFR) before an eruption, it is widely believed that an ideal MHD instability, in particular, the torus instability, is responsible for triggering and driving the eruption, while reconnection, as invoked in the wake of the erupting MFR, plays a secondary role. Here we present a new numerical MHD model in which the eruption of a pre-existing MFR is primarily triggered and driven by reconnection. In this model, a stable MFR embedded in a strap** field is set as the initial condition. A surface converging flow is then applied at the lower boundary, pushing magnetic flux towards to the main polarity inversion line. It drives a quasi-static evolution of the system, during which a current layer is built up below the MFR with decreasing thickness. Once reconnection starts in the current sheet, the eruption commences, which indicates that the reconnection plays a determining role in triggers the eruption. By further analyzing the works done by in the magnetic flux of the pre-existing MFR and the newly reconnected flux during the acceleration stage of the eruption, we find that the latter plays a major role in driving the eruption. Such a model may explain observed eruptions in which the pre-eruption MFR has not reached the conditions for ideal instability.
△ Less
Submitted 16 February, 2024;
originally announced February 2024.
-
Do** Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar Es-sghir,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1300 additional authors not shown)
Abstract:
Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN…
▽ More
Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon do** can substantially recover light losses due to contamination of the liquid argon by nitrogen.
△ Less
Submitted 9 February, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
Choose Your Diffusion: Efficient and flexible ways to accelerate the diffusion model in fast high energy physics simulation
Authors:
Cheng Jiang,
Sitian Qian,
Huilin Qu
Abstract:
The diffusion model has demonstrated promising results in image generation, recently becoming mainstream and representing a notable advancement for many generative modeling tasks. Prior applications of the diffusion model for both fast event and detector simulation in high energy physics have shown exceptional performance, providing a viable solution to generate sufficient statistics within a cons…
▽ More
The diffusion model has demonstrated promising results in image generation, recently becoming mainstream and representing a notable advancement for many generative modeling tasks. Prior applications of the diffusion model for both fast event and detector simulation in high energy physics have shown exceptional performance, providing a viable solution to generate sufficient statistics within a constrained computational budget in preparation for the High Luminosity LHC. However, many of these applications suffer from slow generation with large sampling steps and face challenges in finding the optimal balance between sample quality and speed. The study focuses on the latest benchmark developments in efficient ODE/SDE-based samplers, schedulers, and fast convergence training techniques. We test on the public CaloChallenge and JetNet datasets with the designs implemented on the existing architecture, the performance of the generated classes surpass previous models, achieving significant speedup via various evaluation metrics.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Manipulating multiple optical parametric processes in photonic topological insulators
Authors:
Zhen Jiang,
Bo Ji,
Yanghe Chen,
Chun Jiang,
Guangqiang He
Abstract:
Topological quantum optics, an emerging area of study, holds the potential to bring about substantial enhancements for integrated quantum devices. Here we propose integrated topological quantum devices performing various functions including optical parametric amplification, frequency division, and frequency entangled biphoton generation. We show two distinct edge modes corresponding to different f…
▽ More
Topological quantum optics, an emerging area of study, holds the potential to bring about substantial enhancements for integrated quantum devices. Here we propose integrated topological quantum devices performing various functions including optical parametric amplification, frequency division, and frequency entangled biphoton generation. We show two distinct edge modes corresponding to different frequency ranges in both sandwich kagome and honeycomb topological designs that emulate the quantum valley Hall effect. These two topological edge modes enable two types of optical parametric processes through four-wave mixing, specifically inter-band and intra-band cases. The devices emulating photonic valley-Hall insulators allow the frequency division of two transverse modes, and furthermore, enable the separation of two quantum functionalities - optical parametric amplification and frequency entangled biphoton state generation. More importantly, the parametric processes are inborn topological protected, showing robustness against sharp bends and disorders. Our proposal significantly widens the possibilities for robust, multifunctional topological quantum devices on-chip, which may find applications in quantum information processing.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.
-
The DUNE Far Detector Vertical Drift Technology, Technical Design Report
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1304 additional authors not shown)
Abstract:
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi…
▽ More
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model.
The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise.
In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered.
This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Reconstruction of a Long-term spatially Contiguous Solar-Induced Fluorescence (LCSIF) over 1982-2022
Authors:
Jianing Fang,
Xu Lian,
Youngryel Ryu,
Sungchan Jeong,
Chongya Jiang,
Pierre Gentine
Abstract:
Satellite-observed solar-induced chlorophyll fluorescence (SIF) is a powerful proxy for diagnosing the photosynthetic characteristics of terrestrial ecosystems. Despite the increasing spatial and temporal resolutions of these satellite retrievals, records of SIF are primarily limited to the recent decade, impeding their application in detecting long-term dynamics of ecosystem function and structur…
▽ More
Satellite-observed solar-induced chlorophyll fluorescence (SIF) is a powerful proxy for diagnosing the photosynthetic characteristics of terrestrial ecosystems. Despite the increasing spatial and temporal resolutions of these satellite retrievals, records of SIF are primarily limited to the recent decade, impeding their application in detecting long-term dynamics of ecosystem function and structure. In this study, we leverage the two surface reflectance bands (red and near-infrared) available both from Advanced Very High-Resolution Radiometer (AVHRR, 1982-2022) and MODerate-resolution Imaging Spectroradiometer (MODIS, 2001-2022). Importantly, we calibrate and orbit-correct the AVHRR bands against their MODIS counterparts during their overlap** period. Using the long-term bias-corrected reflectance data, a neural network is then built to reproduce the Orbiting Carbon Observatory-2 SIF using AVHRR and MODIS, and used to map SIF globally over the entire 1982-2022 period. Compared with the previous MODIS-based CSIF product relying on four reflectance bands, our two-band-based product has similar skill but can be advantageously extended to the bias-corrected AVHRR period. Further comparison with three widely used vegetation indices (NDVI, kNDVI, NIRv; all based empirically on red and near-infrared bands) shows a higher or comparable correlation of LCSIF with satellite SIF and site-level GPP estimates across vegetation types, ensuring a greater capacity of LCSIF for representing terrestrial photosynthesis. Globally, LCSIF-AVHRR shows an accelerating upward trend since 1982, with an average rate of 0.0025 mW m-2 nm-1 sr-1 per decade during 1982-2000 and 0.0038 mW m-2 nm-1 sr-1 per decade during 2001-2022. Our LCSIF data provide opportunities to better understand the long-term dynamics of ecosystem photosynthesis and their underlying driving processes.
△ Less
Submitted 19 June, 2024; v1 submitted 25 November, 2023;
originally announced November 2023.
-
An effective self-supervised learning method for various seismic noise attenuation
Authors:
Shijun Cheng,
Zhiyao Cheng,
Chao Jiang,
Weijian Mao,
Qingchen Zhang
Abstract:
Faced with the scarcity of clean label data in real scenarios, seismic denoising methods based on supervised learning (SL) often encounter performance limitations. Specifically, when a model trained on synthetic data is directly applied to field data, its performance would drastically decline due to significant differences in feature distributions between the two. To address this challenge, we dev…
▽ More
Faced with the scarcity of clean label data in real scenarios, seismic denoising methods based on supervised learning (SL) often encounter performance limitations. Specifically, when a model trained on synthetic data is directly applied to field data, its performance would drastically decline due to significant differences in feature distributions between the two. To address this challenge, we develop an effective self-supervised strategy. This strategy, while relying on a single denoising network model, adeptly attenuates various types of seismic noise. The strategy comprises two main phases: 1. The warm-up phase. By using prior knowledge or extracting information from real data, we introduce additional noise to the original noisy data, constructing a noisier data with intensified noise. This data serves as the input, with the original noisy data acting as pseudo-labels. This facilitates rapid pre-training of the network to capture a certain noise characteristics and boosts network stability, setting the stage for the subsequent phase. 2. Iterative data refinement (IDR) phase. During this phase, we use the predictions of the original noisy data from the network trained in the previous epoch as the pseudo-labels. We continue to add noise to the predictions, creating a new noisier-noisy dataset for the current epoch of network training. Through this iterative process, we progressively reduce the discrepancy between the original noisy data and the desired clean data. Ultimately, the network's predictions on the original noisy data become our denoised results. Validations under scenarios with random noise, backscattered noise, and blending noise reveal that our method not only matches the traditional SL techniques on synthetic data but significantly outperforms them on field data.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
On-chip topological transport of optical frequency combs in silicon-based valley photonic crystals
Authors:
Zhen Jiang,
Hongwei Wang,
Yuechen Yang,
Yang Shen,
Bo Ji,
Yanghe Chen,
Yong Zhang,
Lu Sun,
Zheng Wang,
Chun Jiang,
Yikai Su,
Guangqiang He
Abstract:
The generation and control of optical frequency combs in integrated photonic systems enables complex, high-controllable, and large-scale devices. In parallel, harnessing topological physics in multipartite systems has allowed them with compelling features such as robustness against fabrication imperfections. Here we experimentally demonstrate on-chip topological transport for optical frequency com…
▽ More
The generation and control of optical frequency combs in integrated photonic systems enables complex, high-controllable, and large-scale devices. In parallel, harnessing topological physics in multipartite systems has allowed them with compelling features such as robustness against fabrication imperfections. Here we experimentally demonstrate on-chip topological transport for optical frequency combs at telecommunication wavelengths, both in classical and nonclassical domains. We access both the quantum frequency combs and dissipative Kerr soliton combs with a micro-resonator. The quantum frequency comb, that is, a coherent superposition of multiple frequency modes, is proven to be a frequency-entangled qudit state. We also show that dissipative Kerr soliton combs are highly coherent and mode-locked due to the collective coherence or self-organization of solitons. Moreover, the valley kink states allow both quantum frequency combs and dissipative Kerr soliton combs with robustness against sharp bends. Our topologically protected optical frequency combs could enable the inherent robustness in integrated complex photonic systems.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
An Interfacial Profile-Preserving Approach for Phase Field Modeling of Incompressible Two-Phase Flows
Authors:
Haohao Hao,
Xiangwei Li,
Chenglin Jiang,
Huanshu Tan
Abstract:
In this paper, we introduce an interfacial profile-preserving approach for phase field modeling for simulating incompressible two-phase flows. While the advective Cahn-Hilliard equation effectively captures the topological evolution of complex interfacial structures, it tends to displace the fluid interface from its equilibrium state, impacting simulation accuracy. To tackle this challenge, we pre…
▽ More
In this paper, we introduce an interfacial profile-preserving approach for phase field modeling for simulating incompressible two-phase flows. While the advective Cahn-Hilliard equation effectively captures the topological evolution of complex interfacial structures, it tends to displace the fluid interface from its equilibrium state, impacting simulation accuracy. To tackle this challenge, we present an interfacial profile-preserving formulation that relies on a phase-field-related signed distance function, rather than the phase field function itself. It is solved iteratively to restore the equilibrium interface profile after each time step. This approach effectively minimizes discretization errors and enhances mass conservation accuracy for each phase. Our formulation is discretized using a second-order Total Variation Diminishing (TVD) Runge-Kutta method within iterations and a finite volume scheme in spatial discretization. We quantitatively compare our present profile-preserving method with the original method in terms of accuracy and convergence rate through simulations of a deforming drop in a single vortex and a rising bubble in quiescent fluid, and further validate the applicability through simulations of a two-dimensional contracting liquid filament, a drop impacting a deep liquid pool, and three-dimensional drop deformation in shear flow. Our results exhibit good agreement with analytical solutions, prior numerical results, and experimental data, demonstrating the effectiveness and accuracy of our proposed approach.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
Spin injection across a III-V/chiral perovskite interface enabling spin accumulation at room temperature
Authors:
Matthew P. Hautzinger,
Xin Pan,
Steven C. Hayden,
Jiselle Y. Ye,
Qi Jiang,
Mickey J. Wilson,
Yifan Dong,
Emily K. Raulerson,
Ian A. Leahy,
Chun-Sheng Jiang,
Joseph M. Luther,
Yuan Lu,
Katherine Jungjohann,
Z. Valy Vardeny,
Joseph J. Berry,
Kirstin Alberi,
Matthew C. Beard
Abstract:
Spin accumulation in semiconductor structures at room temperature and without magnetic fields is key to enable a broader range of opto-electronic functionality. Current efforts are limited due to inherent inefficiencies associated with spin injection into semiconductor structures. Here, we demonstrate spin injection across chiral halide perovskite/III-V interfaces achieving spin accumulation in a…
▽ More
Spin accumulation in semiconductor structures at room temperature and without magnetic fields is key to enable a broader range of opto-electronic functionality. Current efforts are limited due to inherent inefficiencies associated with spin injection into semiconductor structures. Here, we demonstrate spin injection across chiral halide perovskite/III-V interfaces achieving spin accumulation in a standard semiconductor III-V (AlxGa1-x)0.5In0.5P multiple quantum well (MQW) light emitting diode (LED). The spin accumulation in the MQW is detected via emission of circularly polarized light with a degree of polarization of up to ~15%. The chiral perovskite/III-V interface was characterized with X-ray photoemission spectroscopy (XPS), cross sectional scanning Kelvin probe force microscopy, and cross section transmission electron microscopy (TEM) imaging, showing a clean semiconductor/semiconductor interface where the fermi-level can equilibrate. These findings demonstrate chiral perovskite semiconductors can transform well-developed semiconductor platforms to ones that can also control spin.
△ Less
Submitted 14 November, 2023; v1 submitted 8 September, 2023;
originally announced September 2023.
-
Magnetic Reconnection as the Key Mechanism in Sunspot Rotation Leading to Solar Eruption
Authors:
Chaowei Jiang,
Xueshang Feng,
Xinkai Bian,
Peng Zou,
Aiying Duan,
Xiaoli Yan,
Qiang Hu,
Wen He,
Xinyi Wang,
**bing Zuo,
Yi Wang
Abstract:
The rotation of sunspots around their umbral center has long been considered as an important process in leading to solar eruptions, but the underlying mechanism remains unclear. A prevailing physical picture on how sunspot rotation leads to eruption is that, by twisting the coronal magnetic field lines from their footpoints, the rotation can build up a magnetic flux rope and drive it into some kin…
▽ More
The rotation of sunspots around their umbral center has long been considered as an important process in leading to solar eruptions, but the underlying mechanism remains unclear. A prevailing physical picture on how sunspot rotation leads to eruption is that, by twisting the coronal magnetic field lines from their footpoints, the rotation can build up a magnetic flux rope and drive it into some kinds of ideal magnetohydrodynamics (MHD) instabilities which initiate eruptions. Here with a data-inspired MHD simulation we studied the rotation of a large sunspot in solar active region NOAA 12158 leading to a major eruption, and found that it is distinct from prevailing theories based on ideal instabilities of twisted flux rope. The simulation suggests that, through successive rotation of the sunspot, the coronal magnetic field is sheared with a central current sheet created progressively within the sheared arcade before the eruption, but without forming a flux rope. Then the eruption is instantly triggered once fast reconnection sets in at the current sheet, while a highly twisted flux rope is created during the eruption. Furthermore, the simulation reveals an intermediate evolution stage between the quasi-static energy-storage phase and the impulsive eruption-acceleration phase. This stage may correspond to the slow-rise phase in observation and it enhances building up of the current sheet.
△ Less
Submitted 30 September, 2023; v1 submitted 19 August, 2023;
originally announced August 2023.
-
Data-driven MHD simulation of a sunspot rotating active region leading to solar eruption
Authors:
Chaowei Jiang,
Xueshang Feng,
Xinkai Bian,
Peng Zou,
Aiying Duan,
Xiaoli Yan,
Qiang Hu,
Wen He,
Xinyi Wang,
**bing Zuo,
Yi Wang
Abstract:
Solar eruptions are the leading driver of space weather, and it is vital for space weather forecast to understand in what conditions the solar eruptions can be produced and how they are initiated. The rotation of sunspots around their umbral center has long been considered as an important condition in causing solar eruptions. To unveil the underlying mechanisms, here we carried out a data-driven m…
▽ More
Solar eruptions are the leading driver of space weather, and it is vital for space weather forecast to understand in what conditions the solar eruptions can be produced and how they are initiated. The rotation of sunspots around their umbral center has long been considered as an important condition in causing solar eruptions. To unveil the underlying mechanisms, here we carried out a data-driven magnetohydrodynamics simulation for the event of a large sunspot with rotation for days in solar active region NOAA 12158 leading to a major eruption. The photospheric velocity as recovered from the time sequence of vector magnetograms are inputted directly at the bottom boundary of the numerical model as the driving flow. Our simulation successfully follows the long-term quasi-static evolution of the active region until the fast eruption, with magnetic field structure consistent with the observed coronal emission and onset time of simulated eruption matches rather well with the observations. Analysis of the process suggests that through the successive rotation of the sunspot the coronal magnetic field is sheared with a vertical current sheet created progressively, and once fast reconnection sets in at the current sheet, the eruption is instantly triggered, with a highly twisted flux rope originating from the eruption. This data-driven simulation stresses magnetic reconnection as the key mechanism in sunspot rotation leading to eruption.
△ Less
Submitted 14 August, 2023;
originally announced August 2023.
-
Convergent Incremental Potential Contact
Authors:
Minchen Li,
Zachary Ferguson,
Teseo Schneider,
Timothy Langlois,
Denis Zorin,
Daniele Panozzo,
Chenfanfu Jiang,
Danny M. Kaufman
Abstract:
Recent advances in the simulation of frictionally contacting elastodynamics with the Incremental Potential Contact (IPC) model have enabled inversion and intersection-free simulation via the application of mollified barriers, filtered line-search, and optimization-based solvers for time integration. In its current formulation the IPC model is constructed via a discrete constraint model, replacing…
▽ More
Recent advances in the simulation of frictionally contacting elastodynamics with the Incremental Potential Contact (IPC) model have enabled inversion and intersection-free simulation via the application of mollified barriers, filtered line-search, and optimization-based solvers for time integration. In its current formulation the IPC model is constructed via a discrete constraint model, replacing non-interpenetration constraints with barrier potentials on an already spatially discretized domain. However, while effective, this purely discrete formulation prohibits convergence under refinement. To enable a convergent IPC model we reformulate IPC potentials in the continuous setting and provide a first, convergent discretization thereof. We demonstrate and analyze the convergence behavior of this new model and discretization on a range of elastostatic and dynamic contact problems, and evaluate its accuracy on both analytical benchmarks and application-driven examples.
△ Less
Submitted 29 July, 2023;
originally announced July 2023.
-
A model of failed solar eruption initiated and destructed by magnetic reconnection
Authors:
Chaowei Jiang,
Aiying Duan,
Peng Zou,
Zhenjun Zhou,
Xinkai Bian,
Xueshang Feng,
**bing Zuo,
Yi Wang
Abstract:
Solar eruptions are explosive disruption of coronal magnetic fields, and often launch coronal mass ejections into the interplanetary space. Intriguingly, many solar eruptions fail to escape from the Sun, and the prevailing theory for such failed eruption is based on ideal MHD instabilities of magnetic flux rope (MFR); that is, a MFR runs into kink instability and erupts but cannot reach the height…
▽ More
Solar eruptions are explosive disruption of coronal magnetic fields, and often launch coronal mass ejections into the interplanetary space. Intriguingly, many solar eruptions fail to escape from the Sun, and the prevailing theory for such failed eruption is based on ideal MHD instabilities of magnetic flux rope (MFR); that is, a MFR runs into kink instability and erupts but cannot reach the height for torus instability. Here, based on numerical MHD simulation, we present a new model of failed eruption in which magnetic reconnection plays a leading role in the initiation and failure of the eruption. Initially, a core bipolar potential field is embedded in a background bipolar field, and by applying shearing and converging motions to the core field, a current sheet is formed within the core field. Then, tether-cutting reconnection is triggered at the current sheet, first slow for a while and becoming fast, driving an erupting MFR. Eventually, the rise of MFR is halted by the downward magnetic tension force of the overlying field, although the MFR apex has well exceeded the critical height of torus instability. More importantly, during the rise of the MFR, it experiences a significant rotation around the vertical axis (with a direction contrary to that predicted by kink instability), rendering the field direction at the rope apex almost inverse to the overlying field. As a result, a strong current sheet is formed between the MFR and the overlying flux, and reconnection occurring in this current sheet ruins completely the MFR.
△ Less
Submitted 28 July, 2023;
originally announced July 2023.
-
Topological dissipative Kerr soliton combs in a valley photonic crystal resonator
Authors:
Zhen Jiang,
Lefeng Zhou,
Wei Li,
Yudong Li,
Liangsen Feng,
Tengfei Wu,
Chun Jiang,
Guangqiang He
Abstract:
Topological phases have become an enabling role in exploiting new applications of nonlinear optics in recent years. Here we theoretically propose a valley photonic crystal resonator emulating topologically protected dissipative Kerr soliton combs. It is shown that topological resonator modes can be observed in the resonator. Moreover, we also simulate the dynamic evolution of the topological reson…
▽ More
Topological phases have become an enabling role in exploiting new applications of nonlinear optics in recent years. Here we theoretically propose a valley photonic crystal resonator emulating topologically protected dissipative Kerr soliton combs. It is shown that topological resonator modes can be observed in the resonator. Moreover, we also simulate the dynamic evolution of the topological resonator with the injection of a continuous-wave pump laser. We find that the topological optical frequency combs evolve from Turing rolls to chaotic states, and eventually into single soliton states. More importantly, such dissipative Kerr soliton combs generated in the resonator are inborn topologically protected, showing robustness against sharp bends and structural disorders. Our design supporting topologically protected dissipative Kerr soliton combs could be implemented experimentally in on-chip nanofabricated photonic devices.
△ Less
Submitted 24 July, 2023;
originally announced July 2023.
-
PDS-MAR: a fine-grained Projection-Domain Segmentation-based Metal Artifact Reduction method for intraoperative CBCT images with guidewires
Authors:
Tianling Lyu,
Zhan Wu,
Gege Ma,
Chen Jiang,
Xinyun Zhong,
Yan Xi,
Yang Chen,
Wentao Zhu
Abstract:
Since the invention of modern CT systems, metal artifacts have been a persistent problem. Due to increased scattering, amplified noise, and insufficient data collection, it is more difficult to suppress metal artifacts in cone-beam CT, limiting its use in human- and robot-assisted spine surgeries where metallic guidewires and screws are commonly used. In this paper, we demonstrate that conventiona…
▽ More
Since the invention of modern CT systems, metal artifacts have been a persistent problem. Due to increased scattering, amplified noise, and insufficient data collection, it is more difficult to suppress metal artifacts in cone-beam CT, limiting its use in human- and robot-assisted spine surgeries where metallic guidewires and screws are commonly used. In this paper, we demonstrate that conventional image-domain segmentation-based MAR methods are unable to eliminate metal artifacts for intraoperative CBCT images with guidewires. To solve this problem, we present a fine-grained projection-domain segmentation-based MAR method termed PDS-MAR, in which metal traces are augmented and segmented in the projection domain before being inpainted using triangular interpolation. In addition, a metal reconstruction phase is proposed to restore metal areas in the image domain. The digital phantom study and real CBCT data study demonstrate that the proposed algorithm achieves significantly better artifact suppression than other comparing methods and has the potential to advance the use of intraoperative CBCT imaging in clinical spine surgeries.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
Engineering flat bands in twisted-bilayer graphene away from the magic angle with chiral optical cavities
Authors:
Cunyuan Jiang,
Matteo Baggioli,
Qing-Dong Jiang
Abstract:
Twisted bilayer graphene (TBG) is a recently discovered two-dimensional superlattice structure which exhibits strongly-correlated quantum many-body physics, including strange metallic behavior and unconventional superconductivity. Most of TBG exotic properties are connected to the emergence of a pair of isolated and topological flat electronic bands at the so-called magic angle,…
▽ More
Twisted bilayer graphene (TBG) is a recently discovered two-dimensional superlattice structure which exhibits strongly-correlated quantum many-body physics, including strange metallic behavior and unconventional superconductivity. Most of TBG exotic properties are connected to the emergence of a pair of isolated and topological flat electronic bands at the so-called magic angle, $θ\approx 1.05^{\circ}$, which are nevertheless very fragile. In this work, we show that, by employing chiral optical cavities, the topological flat bands can be stabilized away from the magic angle in an interval of approximately $0.8^{\circ}<θ<1.3^{\circ}$. As highlighted by a simplified theoretical model, time reversal symmetry breaking (TRSB), induced by the chiral nature of the cavity, plays a fundamental role in flattening the isolated bands and gap** out the rest of the spectrum. Additionally, TRSB suppresses the Berry curvature and induces a topological phase transition, with a gap closing at the $Γ$ point, towards a band structure with two isolated flat bands with Chern number equal to $0$. The efficiency of the cavity is discussed as a function of the twisting angle, the light-matter coupling and the optical cavity characteristic frequency. Our results demonstrate the possibility of engineering flat bands in TBG using optical devices, extending the onset of strongly-correlated topological electronic phases in moiré superlattices to a wider range in the twisting angle.
△ Less
Submitted 28 March, 2024; v1 submitted 8 June, 2023;
originally announced June 2023.
-
Coronal Magnetic Field Extrapolation and Topological Analysis of Fine-Scale Structures during Solar Flare Precursors
Authors:
Wen He,
Qiang Hu,
Ju **g,
Haimin Wang,
Chaowei Jiang,
Sushree S. Nayak,
Avijeet Prasad
Abstract:
Magnetic field plays an important role in various solar eruptions like flares, coronal mass ejections, etc. The formation and evolution of characteristic magnetic field topology in solar eruptions are critical problems that will ultimately help us understand the origination of these eruptions in the solar source regions. With the development of advanced techniques and instruments, observations wit…
▽ More
Magnetic field plays an important role in various solar eruptions like flares, coronal mass ejections, etc. The formation and evolution of characteristic magnetic field topology in solar eruptions are critical problems that will ultimately help us understand the origination of these eruptions in the solar source regions. With the development of advanced techniques and instruments, observations with higher resolutions in different wavelengths and fields of view have provided more quantitative information for finer structures. So it is essential to improve our method to study the magnetic field topology in the solar source regions by taking advantage of high-resolution observations. In this study, we employ a nonlinear force-free field (NLFFF) extrapolation method based on a nonuniform grid setting for an M-class flare eruption event (SOL2015-06-22T17:39) with embedded magnetograms from the Solar Dynamics Observatory (SDO) and the Goode Solar Telescope (GST). The extrapolation results employing the embedded magnetogram for the bottom boundary are obtained by maintaining the native resolutions of the corresponding GST and SDO magnetograms. We compare the field line connectivity with the simultaneous GST/H$α$ and SDO/AIA observations for fine-scale structures associated with precursor brightenings. Then we perform a topological analysis of the field line connectivity corresponding to fine-scale magnetic field structures based on the extrapolation results. The results indicate that by combining the high-resolution GST magnetogram with a larger HMI magnetogram, the derived magnetic field topology is consistent with a scenario of magnetic reconnection among sheared field lines across the main polarity inversion line during solar flare precursors.
△ Less
Submitted 5 June, 2023;
originally announced June 2023.
-
Reservoir computing and task performing through using high-$β$ lasers with delayed optical feedback
Authors:
T. Wang,
C. Jiang,
Q. Fang,
X. Guo,
Y. Zhang,
C. **,
S. Xiang
Abstract:
Nonlinear photonic sources including semiconductor lasers have recently been utilized as ideal computation elements for information processing. They supply energy-efficient way and rich dynamics for classification and recognition tasks. In this work, we propose and numerically study the dynamics of complex photonic systems including high-$β$ laser element with delayed feedback and functional curre…
▽ More
Nonlinear photonic sources including semiconductor lasers have recently been utilized as ideal computation elements for information processing. They supply energy-efficient way and rich dynamics for classification and recognition tasks. In this work, we propose and numerically study the dynamics of complex photonic systems including high-$β$ laser element with delayed feedback and functional current modulation, and employ nonlinear laser dynamics of near-threshold region for the application in time-delayed reservoir computing. The results indicate a perfect (100$\%$) recognition accuracy for the pattern recognition task, and an accuracy of about 98$\%$ for the Mackey-Glass chaotic sequences prediction. Therefore, the system shows an improvement of performance with low-power consumption, in particular, the error rate is an order of magnitude smaller in comparison with previous works. Furthermore, by changing the DC pump, we are able to modify the amount of spontaneous emission photons of the system, this then allow us to explore how the laser noise impact the performance of the reservoir computing system. Through manipulating these variables, we show a deeper understanding on the proposed system, which is helpful for the practical applications of reservoir computing.
△ Less
Submitted 23 June, 2023; v1 submitted 5 May, 2023;
originally announced May 2023.
-
Nonreciprocal ultrastrong magnon-photon coupling in the bandgap of photonic crystals
Authors:
Chi Zhang,
Zhenhui Hao,
Yongzhang Shi,
Changjun Jiang,
C. K. Ong,
Guozhi Chai
Abstract:
We observe a nonreciprocal ultrastrong magnon-photon coupling in the bandgap of photonic crystals by introducing a single crystal YIG cylinder into copper photonic crystals cavity as a point defect. The coupling strength reaches up to 1.18 GHz, which constitutes about 10.9% of the photon energy compared to the photon frequency around 10.8 GHz. It is fascinating that the coupling achieves unidirect…
▽ More
We observe a nonreciprocal ultrastrong magnon-photon coupling in the bandgap of photonic crystals by introducing a single crystal YIG cylinder into copper photonic crystals cavity as a point defect. The coupling strength reaches up to 1.18 GHz, which constitutes about 10.9% of the photon energy compared to the photon frequency around 10.8 GHz. It is fascinating that the coupling achieves unidirectional signal transmission in the whole bandgap. This study demonstrates the possibility of controlling nonreciprocal magnon-photon coupling by manipulating the structure of photonic crystals, providing new methods to investigate the influence of magnetic point defects on microwave signal transmission.
△ Less
Submitted 19 April, 2023;
originally announced April 2023.
-
JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos
Authors:
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Marco Beretta
, et al. (592 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Quantification of the Writhe Number Evolution of Solar Filament Axes
Authors:
Zhenjun Zhou,
Chaowei Jiang,
Hongqiang Song,
Yuming Wang,
Yongqiang Hao,
Jun Cui
Abstract:
Solar filament eruptions often show complex and dramatic geometric deformation that is highly relevant to the underlying physical mechanism triggering the eruptions. It has been well known that the writhe of filament axes is a key parameter characterizing its global geometric deformation, but a quantitative investigation of the development of writhe during its eruption is still lacking. Here we in…
▽ More
Solar filament eruptions often show complex and dramatic geometric deformation that is highly relevant to the underlying physical mechanism triggering the eruptions. It has been well known that the writhe of filament axes is a key parameter characterizing its global geometric deformation, but a quantitative investigation of the development of writhe during its eruption is still lacking. Here we introduce the Writhe Application Toolkit (WAT) which can be used to characterize accurately the topology of filament axes. This characterization is achieved based on the reconstruction and writhe number computation of three-dimensional paths of the filament axes from dual-perspective observations. We apply this toolkit to four dextral filaments located in the northern hemisphere with a counterclockwise (CCW) rotation during their eruptions. Initially, all these filaments possess a small writhe number (=<0.20) indicating a weak helical deformation of the axes. As the CCW rotation kicks in, their writhe numbers begin to decrease and reach large negative values. Combined with the extended Călugăreanu theorem, the absolute value of twist is deduced to decrease during the rotation. Such a quantitative analysis strongly indicates a consequence of the conversion of twist into writhe for the studied events.
△ Less
Submitted 22 February, 2023;
originally announced February 2023.
-
The Mechanism of Magnetic Flux Rope Rotation During Solar Eruption
Authors:
Zhenjun Zhou,
Chaowei Jiang,
Xiaoyu Yu,
Yuming Wang,
Yongqiang Hao,
Jun Cui
Abstract:
Solar eruptions often show the rotation of filaments, which is a manifestation of the rotation of erupting magnetic flux rope (MFR). Such a rotation of MFR can be induced by either the torque exerted by a background shear-field component (which is an external cause) or the relaxation of the magnetic twist of the MFR (an internal cause). For a given chirality of the erupting field, both the externa…
▽ More
Solar eruptions often show the rotation of filaments, which is a manifestation of the rotation of erupting magnetic flux rope (MFR). Such a rotation of MFR can be induced by either the torque exerted by a background shear-field component (which is an external cause) or the relaxation of the magnetic twist of the MFR (an internal cause). For a given chirality of the erupting field, both the external and internal drivers cause the same rotation direction. Therefore, it remains elusive from direct observations which mechanism yields the dominant contribution to the rotation. In this paper, we exploit a full MHD simulation of solar eruption by tether-cutting magnetic reconnection to study the mechanism of MFR rotation. In the simulation, the MFR's height-rotation profile suggests that the force by the external shear-field component is a dominant contributor to the rotation. Furthermore, the torque analysis confirms that it is also the only factor in driving the counterclockwise rotation. On the contrary, the Lorentz torque inside the MFR makes a negative effect on this counterclockwise rotation.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Fracture network characterization with deep generative model based stochastic inversion
Authors:
Guodong Chen,
Xin Luo,
Jiu Jimmy Jiao,
Chuanyin Jiang
Abstract:
The distribution of fracture network is crucial to characterize the behaviors of flow field and solute transport, especially for enhanced geothermal systems, as fractures provide preferential flow paths. However, estimating the parameters of the fracture networks and quantifying their uncertainties based on observing data is a nontrivial task because inverse modeling of fractured model is strongly…
▽ More
The distribution of fracture network is crucial to characterize the behaviors of flow field and solute transport, especially for enhanced geothermal systems, as fractures provide preferential flow paths. However, estimating the parameters of the fracture networks and quantifying their uncertainties based on observing data is a nontrivial task because inverse modeling of fractured model is strongly nonlinear and non-Gaussian distributed. To address this issue, a novel inverse modeling framework is proposed for the estimation of the fracture networks. The hierarchical parameterization method is adopted in this work. For a small number of large fractures, each fracture is characterized by fracture length, azimuth and coordination of the fracture center. For dense small fractures, fracture density and fractal dimension are utilized to characterize the fracture networks. Moreover, we adopt variational auto-encoder and generative adversarial network (VAE-GAN) and fuse the GAN objective with prior constraint information to capture the distribution of the parameters of complex fracture networks and to satisfy the prior knowledge of fracture fields, thereby map** the high-dimensional complex parameter distribution into low-dimensional continuous parameter field. Afterwards, relying on the Bayesian framework, ensemble smoother is adopted based on the collected data from hydraulic tomography to reduce the uncertainty of the fracture distribution. Two numerical cases with different complexity are used to test the performance of the proposed framework. The results show that the proposed algorithm can estimate effectively the distribution of the fracture fields after providing sufficient prior constraint information and hydraulic head measurements.
△ Less
Submitted 6 February, 2023; v1 submitted 30 January, 2023;
originally announced February 2023.
-
Investigation of the laser-induced lineshape change in attosecond transient absorption spectra by employing a time-dependent generalized Floquet approach
Authors:
Di Zhao,
Chen-Wei Jiang,
Ai-** Fang,
Shao-Yan Gao,
Fu-li Li
Abstract:
We introduce a time-dependent generalized Floquet (TDGF) approach to calculate attosecond transient absorption spectra of helium atoms subjected to the combination of an attosecond extreme ultraviolet (XUV) pulse and a delayed few-cycle infrared (IR) laser pulse. This TDGF approach provides a Floquet understanding of the laser-induced change of resonant absorption lineshape. It is analytically dem…
▽ More
We introduce a time-dependent generalized Floquet (TDGF) approach to calculate attosecond transient absorption spectra of helium atoms subjected to the combination of an attosecond extreme ultraviolet (XUV) pulse and a delayed few-cycle infrared (IR) laser pulse. This TDGF approach provides a Floquet understanding of the laser-induced change of resonant absorption lineshape. It is analytically demonstrated that, the phase shift of the time-dependent dipole moment that results in the lineshape changes consists of the \emph{adiabatic} laser-induced phase (LIP) due to the IR-induced stark shifts of adiabatic Floquet states and the \emph{non-adiabatic} phase correction due to the non-adiabatic IR-induced coupling between adiabatic Floquet states. Comparisons of the spectral lineshape calculated based on the TDGF approach with the results obtained with the LIP model [S. Chen \emph{et al.}, Phys. Rev. A \textbf{88}, 033409(2013)] and the rotating-wave approximation (RWA) are made in several typical cases. It is suggested in the picture of adiabatic Floquet states that, the LIP model works as long as the generalized adiabatic theorem [A. Dodin \emph{et al.}, Phys. Rev. X Quantum \textbf{2}, 030302(2021)] fulfils, and the RWA works when the higher-order IR-coupling effect in the formation of adiabatic Floquet states is neglectable.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Giant efficiency of long-range orbital torque in Co/Nb bilayers
Authors:
Fufu Liu,
Bokai Liang,
Jie Xu,
Chenglong Jia,
Changjun Jiang
Abstract:
We report unambiguously experimental evidence of a strong orbital current in Nb films with weak spin-orbit coupling via the spin-torque ferromagnetic resonance (ST-FMR) spectrum for Fe/Nb and Co/Nb bilayers. The sign change of the dam**-like torque in Co/Nb demonstrates a large spin-orbit correlation and thus great efficiency of orbital torque in Co/Nb. By studying the efficiency as a function o…
▽ More
We report unambiguously experimental evidence of a strong orbital current in Nb films with weak spin-orbit coupling via the spin-torque ferromagnetic resonance (ST-FMR) spectrum for Fe/Nb and Co/Nb bilayers. The sign change of the dam**-like torque in Co/Nb demonstrates a large spin-orbit correlation and thus great efficiency of orbital torque in Co/Nb. By studying the efficiency as a function of the thickness of Nb sublayer, we reveal a long orbital diffusion length (~3.1 nm) of Nb. Further planar Hall resistance (PHE) measurements at positive and negative applying current confirm the nonlocal orbital transport in ferromagnetic-metal/Nb heterostructures.
△ Less
Submitted 9 November, 2022;
originally announced November 2022.
-
Solar Ring Mission: Building a Panorama of the Sun and Inner-heliosphere
Authors:
Yuming Wang,
Xianyong Bai,
Changyong Chen,
Linjie Chen,
Xin Cheng,
Lei Deng,
Linhua Deng,
Yuanyong Deng,
Li Feng,
Tingyu Gou,
**gnan Guo,
Yang Guo,
Xinjun Hao,
Jiansen He,
Junfeng Hou,
Huang Jiangjiang,
Zhenghua Huang,
Haisheng Ji,
Chaowei Jiang,
Jie Jiang,
Chunlan **,
Xiaolei Li,
Yiren Li,
Jiajia Liu,
Kai Liu
, et al. (29 additional authors not shown)
Abstract:
Solar Ring (SOR) is a proposed space science mission to monitor and study the Sun and inner heliosphere from a full 360° perspective in the ecliptic plane. It will deploy three 120°-separated spacecraft on the 1-AU orbit. The first spacecraft, S1, locates 30° upstream of the Earth, the second, S2, 90° downstream, and the third, S3, completes the configuration. This design with necessary science in…
▽ More
Solar Ring (SOR) is a proposed space science mission to monitor and study the Sun and inner heliosphere from a full 360° perspective in the ecliptic plane. It will deploy three 120°-separated spacecraft on the 1-AU orbit. The first spacecraft, S1, locates 30° upstream of the Earth, the second, S2, 90° downstream, and the third, S3, completes the configuration. This design with necessary science instruments, e.g., the Doppler-velocity and vector magnetic field imager, wide-angle coronagraph, and in-situ instruments, will allow us to establish many unprecedented capabilities: (1) provide simultaneous Doppler-velocity observations of the whole solar surface to understand the deep interior, (2) provide vector magnetograms of the whole photosphere - the inner boundary of the solar atmosphere and heliosphere, (3) provide the information of the whole lifetime evolution of solar featured structures, and (4) provide the whole view of solar transients and space weather in the inner heliosphere. With these capabilities, Solar Ring mission aims to address outstanding questions about the origin of solar cycle, the origin of solar eruptions and the origin of extreme space weather events. The successful accomplishment of the mission will construct a panorama of the Sun and inner-heliosphere, and therefore advance our understanding of the star and the space environment that holds our life.
△ Less
Submitted 23 October, 2022; v1 submitted 19 October, 2022;
originally announced October 2022.
-
Analyses of Flight Time During Solar Proton Events and Solar Flares
Authors:
X. H. Xu,
Y. Wang,
F. S. Wei,
X. S. Feng,
M. H. Bo,
H. W. Tang,
D. S. Wang,
B. Lei,
B. Y. Wang,
P. B. Zuo,
C. W. Jiang,
X. J. Xu,
Z. L. Zhou,
Z. Li,
P. Zou,
L. D. Wang,
Y. X. Gu,
Y. L. Chen,
W. Y. Zhang,
P. Sun
Abstract:
Analyzing the effects of space weather on aviation is a new and develo** topic. It has been commonly accepted that the flight time of the polar flights may increase during solar proton events because the flights have to change their route to avoid the high-energy particles. However, apart from such phenomenon, researches related to the flight time during space weather events is very rare. Based…
▽ More
Analyzing the effects of space weather on aviation is a new and develo** topic. It has been commonly accepted that the flight time of the polar flights may increase during solar proton events because the flights have to change their route to avoid the high-energy particles. However, apart from such phenomenon, researches related to the flight time during space weather events is very rare. Based on the analyses of 39 representative international air routes around westerlies, it is found that 97.44% (94.87%) of the commercial airplanes on the westbound (eastbound) air routes reveal shorter (longer) flight time during solar proton events compared to those during quiet periods, and the averaged magnitude of change in flight time is ~10 min or 0.21%-4.17% of the total flight durations. Comparative investigations reassure the certainty of such phenomenon that the directional differences in flight time are still incontrovertible regardless of over-land routes (China-Europe) or over-sea routes (China-Western America). Further analyses suggest that the solar proton events associated atmospheric heating will change the flight durations by weakening certain atmospheric circulations, such as the polar jet stream. While the polar jet stream will not be obviously altered during solar flares so that the directional differences in flight time are not found. Besides the conventional space weather effects already known, this paper is the first report that indicates a distinct new scenario of how the solar proton events affect flight time. These analyses are also important for aviation since our discoveries could help the airways optimize the air routes to save passenger time costs, reduce fuel costs and even contribute to the global warming issues.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
Characteristics of Flight Delays during Solar Flares
Authors:
X. H. Xu,
Y. Wang,
F. S. Wei,
X. S. Feng,
M. H. Bo,
H. W. Tang,
D. S. Wang,
L. Bian,
B. Y. Wang,
W. Y. Zhang,
Y. S. Huang,
Z. Li,
J. P. Guo,
P. B. Zuo,
C. W. Jiang,
X. J. Xu,
Z. L. Zhou,
P. Zou
Abstract:
Solar flare is one of the severest solar activities on the sun, and it has many important impacts on the near-earth space. It has been found that flight arrival delays will increase during solar flare. However, the detailed intrinsic mechanism of how solar flares influence the delays is still unknown. Based on 5-years huge amount of flight data, here we comprehensively analyze the flight departure…
▽ More
Solar flare is one of the severest solar activities on the sun, and it has many important impacts on the near-earth space. It has been found that flight arrival delays will increase during solar flare. However, the detailed intrinsic mechanism of how solar flares influence the delays is still unknown. Based on 5-years huge amount of flight data, here we comprehensively analyze the flight departure delays during 57 solar flares. It is found that the averaged flight departure delay time during solar flares increased by 20.68% (7.67 min) compared to those during quiet periods. It is also shown that solar flare related flight delays reveal apparent time and latitude dependencies. Flight delays during dayside solar flares are more serious than those during nightside flares, and the longer (shorter) delays tend to occur in the lower (higher) latitude airport. Further analyses suggest that flight delay time and delay rate would be directly modulated by the solar intensity (soft X-ray flux) and the Solar Zenith Angle. For the first time, these results indicate that the communication interferences caused by solar flares will directly affect flight departure delay time and delay rate. This work also expands our conventional understandings to the impacts of solar flares on human society, and it could also provide us with brand new views to help prevent or cope with flight delays.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
The Effects of Space Weather on Flight Delays
Authors:
Y. Wang,
X. H. Xu,
F. S. Wei,
X. S. Feng,
M. H. Bo,
H. W. Tang,
D. S. Wang,
L. Bian,
B. Y. Wang,
W. Y. Zhang,
Y. S. Huang,
Z. Li,
J. P. Guo,
P. B. Zuo,
C. W. Jiang,
X. J. Xu,
Z. L. Zhou,
P. Zou
Abstract:
Although the sun is really far away from us, some solar activities could still influence the performance and reliability of space-borne and ground-based technological systems on Earth. Those time-varying conditions in space caused by the sun are also called space weather, as the atmospheric conditions that can affect weather on the ground. It is known that aviation activities can be affected durin…
▽ More
Although the sun is really far away from us, some solar activities could still influence the performance and reliability of space-borne and ground-based technological systems on Earth. Those time-varying conditions in space caused by the sun are also called space weather, as the atmospheric conditions that can affect weather on the ground. It is known that aviation activities can be affected during space weather events, but the exact effects of space weather on aviation are still unclear. Especially how the flight delays, the top topic concerned by most people, will be affected by space weather has never been thoroughly researched. By analyzing huge amount of flight data (~5X106 records), for the first time, we demonstrate that space weather events could have systematically modulating effects on flight delays. The average arrival delay time and 30-minute delay rate during space weather events are significantly increased by 81.34% and 21.45% respectively compared to those during quiet periods. The evident negative correlation between the yearly flight regularity rate and the yearly mean total sunspot number during 22 years also confirms such delay effects. Further studies indicate that the interference in communication and navigation caused by geomagnetic field fluctuations and ionospheric disturbances associated with the space weather events will increase the flight delay time and delay rate. These results expand the traditional field of space weather research and could also provide us with brand new views for improving the flight delay predications.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
The role of photospheric converging motion in initiation of solar eruptions
Authors:
Xinkai Bian,
Chaowei Jiang,
Xueshang Feng
Abstract:
It is well known that major solar eruptions are often produced by active regions with continual photospheric shearing and converging motions. Here, through high accuracy magnetohydrodynamics simulation, we show how solar eruption is initiated in a single bipolar configuration as driven by first shearing and then converging motions at the bottom surface. Different from many previous simulations, we…
▽ More
It is well known that major solar eruptions are often produced by active regions with continual photospheric shearing and converging motions. Here, through high accuracy magnetohydrodynamics simulation, we show how solar eruption is initiated in a single bipolar configuration as driven by first shearing and then converging motions at the bottom surface. Different from many previous simulations, we applied the converging motion without magnetic diffusion, thus it only increases the magnetic gradient across the polarity inversion line but without magnetic flux cancellation. The converging motion at the footpoints of the sheared arcade creates a current sheet in a quasi-static way, and the eruption is triggered by magnetic reconnection of the current sheet, which supports the same scenario as shown in our previous simulation with only shearing motion. With the converging motion, the current sheet is formed at a lower height and has a higher current density than with shearing motion alone, which makes reconnection more effective and eruption stronger. Moreover, the converging motion renders a fast decay rate of the overlying field with height and thus favorable for an eruption. This demonstrate that the converging flow is more efficient to create the current sheet and more favorable for eruption than by solely the shearing flow.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Minimizing the programming power of phase change memory by using graphene nanoribbon edge-contact
Authors:
Xiujun Wang,
Sannian Song,
Haomin Wang,
Tianqi Guo,
Yuan Xue,
Ruobing Wang,
HuiShan Wang,
Lingxiu Chen,
Chengxin Jiang,
Chen Chen,
Zhiyuan Shi,
Tianru Wu,
Wenxiong Song,
Sifan Zhang,
Kenji Watanabe,
Takashi Taniguchi,
Zhitang Song,
Xiaoming Xie
Abstract:
Nonvolatile phase change random access memory (PCRAM) is regarded as one of promising candidates for emerging mass storage in the era of Big Data. However, relatively high programming energy hurdles the further reduction of power consumption in PCRAM. Utilizing narrow edge-contact of graphene can effectively reduce the active volume of phase change material in each cell, and therefore realize low-…
▽ More
Nonvolatile phase change random access memory (PCRAM) is regarded as one of promising candidates for emerging mass storage in the era of Big Data. However, relatively high programming energy hurdles the further reduction of power consumption in PCRAM. Utilizing narrow edge-contact of graphene can effectively reduce the active volume of phase change material in each cell, and therefore realize low-power operation. Here, we demonstrate that a write energy can be reduced to about ~53.7 fJ in a cell with ~3 nm-wide graphene nanoribbon (GNR) as edge-contact, whose cross-sectional area is only ~1 nm2. It is found that the cycle endurance exhibits an obvious dependence on the bias polarity in the cell with structure asymmetry. If a positive bias was applied to graphene electrode, the endurance can be extended at least one order longer than the case with reversal of polarity. The work represents a great technological advance for the low power PCRAM and could benefit for in-memory computing in future.
△ Less
Submitted 22 July, 2022;
originally announced July 2022.
-
Demonstration of room-temperature continuous-wave operation of InGaAs/AlGaAs quantum well lasers directly grown on on-axis silicon (001)
Authors:
Chen Jiang,
Hao Liu,
Jun Wang,
Xiaomin Ren,
Qi Wang,
Zhuoliang Liu,
Bojie Ma,
Kai Liu,
Ren Ren,
Yidong Zhang,
Shiwei Cai,
Yongqing Huang
Abstract:
Room-temperature continuous-wave operation of InGaAs/AlGaAs quantum well lasers directly grown on on-axis silicon (001) has been demonstrated. A 420 nm thick GaAs epilayer completely free of antiphase domains was initially grown on the silicon substrate in a metal-organic chemical vapor deposition system and the other epilayers including four sets of five-period strained-layer superlattices and th…
▽ More
Room-temperature continuous-wave operation of InGaAs/AlGaAs quantum well lasers directly grown on on-axis silicon (001) has been demonstrated. A 420 nm thick GaAs epilayer completely free of antiphase domains was initially grown on the silicon substrate in a metal-organic chemical vapor deposition system and the other epilayers including four sets of five-period strained-layer superlattices and the laser-structural layers were successively grown in a molecular beam epitaxy system. The lasers were prepared as broad-stripe Fabry-Perot ones with a stripe width of 21.5 um and a cavity length of 1 mm. Typically, the threshold current and the corresponding threshold current density are 186.4 mA and 867 A/cm2, respectively. The lasing wavelength is around 980 nm and the slope efficiency is 0.097 W/A with a single-facet output power of 22.5 mW at an injection current of 400 mA. This advancement makes the silicon-based monolithic optoelectronic integration relevant to quantum well lasers more promising with an enhanced feasibility.
△ Less
Submitted 29 July, 2022; v1 submitted 4 April, 2022;
originally announced April 2022.
-
The Rotation of Magnetic Flux Rope Formed during Solar Eruption
Authors:
Zhenjun Zhou,
Chaowei Jiang,
Rui Liu,
Yuming Wang,
Lijuan Liu,
Jun Cui
Abstract:
The eruptions of solar filaments often show rotational motion about their rising direction, but it remains elusive what mechanism governs such rotation and how the rotation is related to the initial morphology of the pre-eruptive filament (and co-spatial sigmoid), filament chirality, and magnetic helicity. The conventional view regarding the rotation as a result of a magnetic flux rope (MFR) under…
▽ More
The eruptions of solar filaments often show rotational motion about their rising direction, but it remains elusive what mechanism governs such rotation and how the rotation is related to the initial morphology of the pre-eruptive filament (and co-spatial sigmoid), filament chirality, and magnetic helicity. The conventional view regarding the rotation as a result of a magnetic flux rope (MFR) under-going the ideal kink instability still has confusion in explaining these relationships. Here we proposed an alternative explanation for the rotation during eruptions, by analyzing a magnetohydrodynamic simulation in which magnetic reconnection initiates an eruption from a sheared arcade configuration and an MFR is formed during eruption through the reconnection. The simulation reproduces a reverse S-shaped MFR with dextral chirality, and the axis of this MFR rotates counterclockwise while rising, which compares favorably with a typical filament eruption observed from dual viewing angles. By calculating the twist and writhe numbers of the modeled MFR during its eruption, we found that accompanied with the rotation, the nonlocal writhe of the MFR's axis decreases while the twist of its surrounding field lines increases, and this is distinct from the kink instability, which converts magnetic twist into writhe of the MFR axis.
△ Less
Submitted 18 February, 2022;
originally announced February 2022.
-
arXiv:2110.14915
[pdf]
cond-mat.supr-con
cond-mat.mes-hall
cond-mat.mtrl-sci
cond-mat.str-el
physics.app-ph
Antiferromagnetism in Ni-Based Superconductors
Authors:
Xiaorong Zhou,
Xiaowei Zhang,
Jiabao Yi,
Peixin Qin,
Zexin Feng,
Peiheng Jiang,
Zhicheng Zhong,
Han Yan,
Xiaoning Wang,
Hongyu Chen,
Haojiang Wu,
Xin Zhang,
Ziang Meng,
Xiaojiang Yu,
Mark B. H. Breese,
Jiefeng Cao,
**gmin Wang,
Chengbao Jiang,
Zhiqi Liu
Abstract:
Due to the lack of any magnetic order down to 1.7 K in the parent bulk compound NdNiO2, the recently discovered 9-15 K superconductivity in the infinite-layer Nd0.8Sr0.2NiO2 thin films has provided an exciting playground for unearthing new superconductivity mechanisms. In this letter, we report the successful synthesis of a series of superconducting Nd0.8Sr0.2NiO2 thin films ranging from 8 to 40 n…
▽ More
Due to the lack of any magnetic order down to 1.7 K in the parent bulk compound NdNiO2, the recently discovered 9-15 K superconductivity in the infinite-layer Nd0.8Sr0.2NiO2 thin films has provided an exciting playground for unearthing new superconductivity mechanisms. In this letter, we report the successful synthesis of a series of superconducting Nd0.8Sr0.2NiO2 thin films ranging from 8 to 40 nm. We observe the large exchange bias effect between the superconducting Nd0.8Sr0.2NiO2 films and a thin ferromagnetic layer, which suggests the existence of the antiferromagnetic order. Furthermore, the existence of the antiferromagnetic order is evidenced by X-ray magnetic linear dichroism measurements. These experimental results are fundamentally critical for the current field.
△ Less
Submitted 28 October, 2021;
originally announced October 2021.
-
Plant-Protein-Enabled Biodegradable Triboelectric Nanogenerator for Sustainable Agriculture
Authors:
Chengmei Jiang,
Chengxin He,
Qi Zhang,
Chi Zhang,
Xiaohui Feng,
Xunjia Li,
Qiang Zhao,
Yibin Ying,
Jianfeng **
Abstract:
As the use of triboelectric nanogenerators (TENGs) increases, the generation of related electronic waste has been a major challenge. Therefore, the development of environmentally friendly, biodegradable, and low-cost TENGs must be prioritized. Having discovered that plant proteins, by-products of grain processing, possess excellent triboelectric properties, we explore these properties by evaluatin…
▽ More
As the use of triboelectric nanogenerators (TENGs) increases, the generation of related electronic waste has been a major challenge. Therefore, the development of environmentally friendly, biodegradable, and low-cost TENGs must be prioritized. Having discovered that plant proteins, by-products of grain processing, possess excellent triboelectric properties, we explore these properties by evaluating the protein structure. The proteins are recycled to fabricate triboelectric layers, and the triboelectric series according to electrical properties is determined for the first time. Using a special structure design, we construct a plant-protein-enabled biodegradable TENG by integrating a polylactic acid film, which is used as a new type of mulch film to construct a growth-promoting system that generates space electric fields for agriculture. Thus, from the plant protein to the crop, a sustainable recycling loop is implemented. Using bean seedlings as a model to confirm the feasibility of the mulch film, we further use it in the cultivation of greenhouse vegetables. Experimental results demonstrate the applicability of the proposed plant-protein-enabled biodegradable TENG in sustainable agriculture.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
Formation of Magnetic Flux Rope during Solar Eruption. I. Evolution of Toroidal Flux and Reconnection Flux
Authors:
Chaowei Jiang,
Jun Chen,
Aiying Duan,
Xinkai Bian,
Xinyi Wang,
Jiaying Li,
Peng Zou,
Xueshang Feng
Abstract:
Magnetic flux ropes (MFRs) constitute the core structure of coronal mass ejections (CMEs), but hot debates remain on whether the MFR forms before or during solar eruptions. Furthermore, how flare reconnection shapes the erupting MFR is still elusive in three dimensions. Here we studied a new MHD simulation of CME initiation by tether-cutting magnetic reconnection in a single magnetic arcade. The s…
▽ More
Magnetic flux ropes (MFRs) constitute the core structure of coronal mass ejections (CMEs), but hot debates remain on whether the MFR forms before or during solar eruptions. Furthermore, how flare reconnection shapes the erupting MFR is still elusive in three dimensions. Here we studied a new MHD simulation of CME initiation by tether-cutting magnetic reconnection in a single magnetic arcade. The simulation follows the whole life, including the birth and subsequent evolution, of an MFR during eruption. In the early phase, the MFR is partially separated from its ambient field by a magnetic quasi-separatrix layer (QSL) that has a double-J shaped footprint on the bottom surface. With the ongoing of the reconnection, the arms of the two J-shaped footprints continually separate from each other, and the hooks of the J shaped footprints expand and eventually become closed almost at the eruption peak time, and thereafter the MFR is fully separated from the un-reconnected field by the QSL. We further studied the evolution of the toroidal flux in the MFR and compared it with that of the reconnected flux. Our simulation reproduced an evolution pattern of increase-to-decrease of the toroidal flux, which is reported recently in observations of variations in flare ribbons and transient coronal dimming. The increase of toroidal flux is owing to the flare reconnection in the early phase that transforms the sheared arcade to twisted field lines, while its decrease is a result of reconnection between field lines in the interior of the MFR in the later phase.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
Ships, Splashes, and Waves on a Vast Ocean
Authors:
Libo Huang,
Ziyin Qu,
Xun Tan,
Xinxin Zhang,
Dominik L. Michels,
Chenfanfu Jiang
Abstract:
The simulation of large open water surface is challenging using a uniform volumetric discretization of the Navier-Stokes equations. Simulating water splashes near moving objects, which height field methods for water waves cannot capture, necessitates high resolutions. Such simulations can be carried out using the Fluid-Implicit-Particle (FLIP) method. However, the FLIP method is not efficient for…
▽ More
The simulation of large open water surface is challenging using a uniform volumetric discretization of the Navier-Stokes equations. Simulating water splashes near moving objects, which height field methods for water waves cannot capture, necessitates high resolutions. Such simulations can be carried out using the Fluid-Implicit-Particle (FLIP) method. However, the FLIP method is not efficient for the long-lasting water waves that propagate to long distances, which require sufficient depth for a correct dispersion relationship. This paper presents a new method to tackle this dilemma through an efficient hybridization of volumetric and surface-based advection-projection discretizations. We design a hybrid time-step** algorithm that combines a FLIP domain and an adaptively remeshed Boundary Element Method (BEM) domain for the incompressible Euler equations. The resulting framework captures the detailed water splashes near moving objects with the FLIP method, and produces convincing water waves with correct dispersion relationships at modest additional costs.
△ Less
Submitted 18 September, 2021; v1 submitted 11 August, 2021;
originally announced August 2021.
-
Electric-Field-Controlled Antiferromagnetic Spintronic Devices
Authors:
Han Yan,
Zexin Feng,
Peixin Qin,
Xiaorong Zhou,
Huixin Guo,
Xiaoning Wang,
Hongyu Chen,
Xin Zhang,
Haojiang Wu,
Chengbao Jiang,
Zhiqi Liu
Abstract:
In recent years, the field of antiferromagnetic spintronics has been substantially advanced. Electric-field control is a promising approach to achieving ultra-low power spintronic devices via suppressing Joule heating. In this article, cutting-edge research, including electric-field modulation of antiferromagnetic spintronic devices using strain, ionic liquids, dielectric materials, and electroche…
▽ More
In recent years, the field of antiferromagnetic spintronics has been substantially advanced. Electric-field control is a promising approach to achieving ultra-low power spintronic devices via suppressing Joule heating. In this article, cutting-edge research, including electric-field modulation of antiferromagnetic spintronic devices using strain, ionic liquids, dielectric materials, and electrochemical ionic migration, are comprehensively reviewed. Various emergent topics such as the Neel spin-orbit torque, chiral spintronics, topological antiferromagnetic spintronics, anisotropic magnetoresistance, memory devices, two-dimensional magnetism, and magneto-ionic modulation with respect to antiferromagnets are examined. In conclusion, we envision the possibility of realizing high-quality room-temperature antiferromagnetic tunnel junctions, antiferromagnetic spin logic devices, and artificial antiferromagnetic neurons. It is expected that this work provides an appropriate and forward-looking perspective that will promote the rapid development of this field.
△ Less
Submitted 10 August, 2021;
originally announced August 2021.
-
Giant Piezospintronic Effect in a Noncollinear Antiferromagnetic Metal
Authors:
Huixin Guo,
Zexin Feng,
Han Yan,
Jiuzhao Liu,
Jia Zhang,
Xiaorong Zhou,
Peixin Qin,
Jialin Cai,
Zhongming Zeng,
Xin Zhang,
Xiaoning Wang,
Hongyu Chen,
Haojiang Wu,
Chengbao Jiang,
Zhiqi Liu
Abstract:
One of the main bottleneck issues for room-temperature antiferromagnetic spintronic devices is the small signal read-out owing to the limited anisotropic magnetoresistance in antiferromagnets. However, this could be overcome by either utilizing the Berry-curvature-induced anomalous Hall resistance in noncollinear antiferromagnets or establishing tunnel junction devices based on effective manipulat…
▽ More
One of the main bottleneck issues for room-temperature antiferromagnetic spintronic devices is the small signal read-out owing to the limited anisotropic magnetoresistance in antiferromagnets. However, this could be overcome by either utilizing the Berry-curvature-induced anomalous Hall resistance in noncollinear antiferromagnets or establishing tunnel junction devices based on effective manipulation of antiferromagnetic spins. In this work, we demonstrate the giant piezoelectric strain control of the spin structure and the anomalous Hall resistance in a noncollinear antiferromagnetic metal - D019 hexagonal Mn3Ga. Furthermore, we built tunnel junction devices with a diameter of 200 nm to amplify the maximum tunneling resistance ratio to more than 10% at room-temperature, which thus implies significant potential of noncollinear antiferromagnets for large signal-output and high-density antiferromagnetic spintronic device applications.
△ Less
Submitted 10 August, 2021;
originally announced August 2021.
-
BFEMP: Interpenetration-Free MPM-FEM Coupling with Barrier Contact
Authors:
Xuan Li,
Yu Fang,
Minchen Li,
Chenfanfu Jiang
Abstract:
This paper introduces BFEMP, a new approach for monolithically coupling the Material Point Method (MPM) with the Finite Element Method (FEM) through barrier energy-based particle-mesh frictional contact using a variational time-step** formulation. The fully implicit time integration of the coupled system is recast into a barrier-augmented unconstrained nonlinear optimization problem. A modified…
▽ More
This paper introduces BFEMP, a new approach for monolithically coupling the Material Point Method (MPM) with the Finite Element Method (FEM) through barrier energy-based particle-mesh frictional contact using a variational time-step** formulation. The fully implicit time integration of the coupled system is recast into a barrier-augmented unconstrained nonlinear optimization problem. A modified line-search Newton's method is adopted to strictly prevent material points from penetrating the FEM domain, ensuring convergence and feasibility regardless of the time step size or the mesh resolutions. The proposed coupling scheme also reduces to a new approach for imposing separable frictional kinematic boundaries for MPM when all nodal displacements in the FEM domain are prescribed with Dirichlet boundary conditions. Compared to standard implicit time integration, the extra algorithmic components associated with the contact treatment only depend on simple point-segment (or point-triangle in 3D) geometric queries which robustly handle arbitrary FEM mesh boundaries represented with codimension-1 simplices. Experiments and analyses are performed to demonstrate the robustness and accuracy of the proposed method.
△ Less
Submitted 7 November, 2021; v1 submitted 6 August, 2021;
originally announced August 2021.
-
Low Temperature Plasma for Biology, Hygiene, and Medicine: Perspective and Roadmap
Authors:
Mounir Laroussi,
Sander Bekeschus,
Michael Keidar,
Annemie Bogaerts,
Alexander Fridman,
XinPei Lu,
Kostya,
Ostrikov,
Masaru Hori,
Katharina Stapelmann,
Vandana Miller,
Stephan Reuter,
Christophe Laux,
Ali Mesbah,
James Walsh,
Chunqi Jiang,
Selma Mededovic Thagard,
Hiromasa Tanaka,
DaWei Liu,
Dayun Yan,
Maksudbek Yusupov
Abstract:
Plasma, the fourth and most pervasive state of matter in the visible universe, is a fascinating medium that is connected to the beginning of our universe itself. Man-made plasmas are at the core of many technological advances that include the fabrication of semiconductor devices, which enabled the modern computer and communication revolutions. The introduction of low temperature, atmospheric press…
▽ More
Plasma, the fourth and most pervasive state of matter in the visible universe, is a fascinating medium that is connected to the beginning of our universe itself. Man-made plasmas are at the core of many technological advances that include the fabrication of semiconductor devices, which enabled the modern computer and communication revolutions. The introduction of low temperature, atmospheric pressure plasmas to the biomedical field has ushered a new revolution in the healthcare arena that promises to introduce plasma-based therapies to combat some thorny and long-standing medical challenges. This paper presents an overview of where research is at today and discusses innovative concepts and approaches to overcome present challenges and take the field to the next level. It is written by a team of experts who took an in-depth look at the various biomedical applications, made critical analysis, and proposed ideas and concepts that should help the research community focus their efforts on clear and practical steps necessary to keep the field advancing for decades to come.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
Spontaneous-emission-enabled dynamics at the threshold of a directly modulated semiconductor laser
Authors:
J. Zou,
H. Zhou,
C. Jiang,
G. Wang,
G. L. Lippi,
T. Wang
Abstract:
Chaos in semiconductor lasers or other optical systems has been intensively studied in the past two decades. However, modulation around threshold has received much less attention, in particular in gain-modulated semiconductor lasers. In this article, we investigate the bifurcation sequence which appears with pump modulation in the threshold region with a large amplitude and different values of mod…
▽ More
Chaos in semiconductor lasers or other optical systems has been intensively studied in the past two decades. However, modulation around threshold has received much less attention, in particular in gain-modulated semiconductor lasers. In this article, we investigate the bifurcation sequence which appears with pump modulation in the threshold region with a large amplitude and different values of modulation frequency. Modulation around threshold necessarily includes ``below-threshold'' dynamics, which can be effectively displayed only through through a nonlinear visualization of the oscillations. The irregular temporal behaviour is examined at various modulation frequencies and amplitudes, highlighting a possible route to chaos for very large amplitude modulation in the near-threshold region. The addition of the (average) spontaneous emission to the lasing mode enables a coupled dynamics between photons and carriers even below threshold, thus extending the pump range in which the modulation actively modifies the laser behaviour. We also report on the existence of a transition between similar attractors characterized by a temporal transient which depends on the amplitude of the modulation driving the pump.
△ Less
Submitted 28 January, 2022; v1 submitted 3 August, 2021;
originally announced August 2021.
-
Densely connected neural networks for nonlinear regression
Authors:
Chao Jiang,
Canchen Jiang,
Dongwei Chen,
Fei Hu
Abstract:
Densely connected convolutional networks (DenseNet) behave well in image processing. However, for regression tasks, convolutional DenseNet may lose essential information from independent input features. To tackle this issue, we propose a novel DenseNet regression model where convolution and pooling layers are replaced by fully connected layers and the original concatenation shortcuts are maintaine…
▽ More
Densely connected convolutional networks (DenseNet) behave well in image processing. However, for regression tasks, convolutional DenseNet may lose essential information from independent input features. To tackle this issue, we propose a novel DenseNet regression model where convolution and pooling layers are replaced by fully connected layers and the original concatenation shortcuts are maintained to reuse the feature. To investigate the effects of depth and input dimension of proposed model, careful validations are performed by extensive numerical simulation. The results give an optimal depth (19) and recommend a limited input dimension (under 200). Furthermore, compared with the baseline models including support vector regression, decision tree regression, and residual regression, our proposed model with the optimal depth performs best. Ultimately, DenseNet regression is applied to predict relative humidity, and the outcome shows a high correlation (0.91) with observations, which indicates that our model could advance environmental data analysis.
△ Less
Submitted 28 July, 2021;
originally announced August 2021.
-
Emerging Oscillating Reactions at the Insulator/Semiconductor Solid/Solid Interface via Proton Implantation
Authors:
Dechao Meng,
Guanghui Zhang,
Ming Li,
Zeng-hui Yang,
Hang Zhou,
Mu Lan,
Yang Liu,
Shouliang Hu,
Yu Song,
Chunsheng Jiang,
Lei Chen,
Hengli Duan,
Wensheng Yan,
Jianming Xue,
Xu Zuo,
Yijia Du,
Gang Dai,
Su-Huai Wei
Abstract:
Most oscillating reactions (ORs) happen in solutions. Few existing solid-based ORs either happen on solid/gas (e.g., oxidation or corrosion) or solid/liquid interfaces, or at the all-solid interfaces neighboring to metals or ionic conductors (e.g., electrolysis or electroplate). We report in this paper a new type of all-solid based OR that happens at the insulator (amorphous SiO$_2$)/semiconductor…
▽ More
Most oscillating reactions (ORs) happen in solutions. Few existing solid-based ORs either happen on solid/gas (e.g., oxidation or corrosion) or solid/liquid interfaces, or at the all-solid interfaces neighboring to metals or ionic conductors (e.g., electrolysis or electroplate). We report in this paper a new type of all-solid based OR that happens at the insulator (amorphous SiO$_2$)/semiconductor (Si) interface with the interfacial point defects as the oscillating species. This OR is the first example of the point-defect coupled ORs (PDC-ORs) proposed by H. Schmalzried et al. and J. Janek et al. decades ago. We use proton implantation as the driving force of the oscillation, and employ techniques common in semiconductor device characterization to monitor the oscillation in situ. This approach not only overcomes the difficulties associated with detecting reactions in solids, but also accurately measure the oscillating ultra-low concentration ($10^{10}\sim10^{11}$ cm$^{-2}$) of the interfacial charged point-defects. We propose a mechanism for the reported PDC-OR based on the Brusselator model by identifying the interfacial reactions.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Fiber-based optical trap** of yeast cells as near-field magnifying lenses for parallel subwavelength imaging
Authors:
Chunlei Jiang,
Hangyu Yue,
Bing Yan,
Taiji Dong,
Xiangyu Cui,
Zengbo Wang
Abstract:
Subwavelength imaging by microsphere lenses is a promising label-free super-resolution imaging technique. There is a growing interest to use live cells to replace the widely used non-biological microsphere lenses. In this work, we demonstrate the use of yeast cells for such imaging purpose. Using fiber-based optical trap** technique, we successfully trapped a chain of yeast cells and bring them…
▽ More
Subwavelength imaging by microsphere lenses is a promising label-free super-resolution imaging technique. There is a growing interest to use live cells to replace the widely used non-biological microsphere lenses. In this work, we demonstrate the use of yeast cells for such imaging purpose. Using fiber-based optical trap** technique, we successfully trapped a chain of yeast cells and bring them to the vicinity of imaging objects. These yeast cells work as near-field magnifying lenses and simultaneously pick up the sub-diffraction information of the nanoscale objects under each cell and project them into the far-field. Blu-ray disc of 100 nm feature can be clearly resolved in a parallel manner by each cell, thus effectively increasing the imaging field of view and imaging efficiency. Our work will contribute to the further development of more advanced bio-superlens imaging system
△ Less
Submitted 3 July, 2021;
originally announced July 2021.