Showing 1–48 of 48 results for author: Jewell, J

Efficient ultra-broadband low-resolution astrophotonic spectrographs

Authors: Pradip Gatkine, Greg Sercel, Nemanja Jovanovic, Ronald Broeke, Katarzyna Lawniczuk, Marco Passoni, Ashok Balakrishnan, Serge Bidnyk, Jielong Yin, Jeffrey Jewell, J. Kent Wallace, Dimitri Mawet

Abstract: Broadband low-resolution near-infrared spectrographs in a compact form are crucial for ground- and space-based astronomy and other fields of sensing. Astronomical spectroscopy poses stringent requirements including high efficiency, broad band operation ($>$ 300 nm), and in some cases, polarization insensitivity. We present and compare experimental results from the design, fabrication, and characte… ▽ More Broadband low-resolution near-infrared spectrographs in a compact form are crucial for ground- and space-based astronomy and other fields of sensing. Astronomical spectroscopy poses stringent requirements including high efficiency, broad band operation ($>$ 300 nm), and in some cases, polarization insensitivity. We present and compare experimental results from the design, fabrication, and characterization of broadband (1200 - 1650 nm) arrayed waveguide grating (AWG) spectrographs built using the two most promising low-loss platforms - Si$_3$N$_4$ (rectangular waveguides) and doped-SiO$_2$ (square waveguides). These AWGs have a resolving power ($λ/Δλ$) of ~200, a free spectral range of ~ 200-350 nm, and a small footprint of ~ 50-100 mm$^2$. The peak overall (fiber-chip-fiber) efficiency of the doped-SiO$_2$ AWG was ~ 79\% (1 dB), and it exhibited a negligible polarization-dependent shift compared to the channel spacing. For Si$_3$N$_4$ AWGs, the peak overall efficiency in TE mode was ~ 50\% (3 dB), and the main loss component was found to be fiber-to-chip coupling losses. These broadband AWGs are key to enabling compact integrations such as multi-object spectrographs or dispersion back-ends for other astrophotonic devices such as photonic lanterns or nulling interferometers. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Comments: 16 pages, 8 Figures, accepted for publication in Optics Express

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Authors: Nemanja Jovanovic, Pradip Gatkine, Narsireddy Anugu, Rodrigo Amezcua-Correa, Ritoban Basu Thakur, Charles Beichman, Chad Bender, Jean-Philippe Berger, Azzurra Bigioli, Joss Bland-Hawthorn, Guillaume Bourdarot, Charles M. Bradford, Ronald Broeke, Julia Bryant, Kevin Bundy, Ross Cheriton, Nick Cvetojevic, Momen Diab, Scott A. Diddams, Aline N. Dinkelaker, Jeroen Duis, Stephen Eikenberry, Simon Ellis, Akira Endo, Donald F. Figer , et al. (55 additional authors not shown)

Abstract: Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio… ▽ More Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 191 pages, 47 figures. This is the version of the article before peer review or editing, as submitted by an author to J. Phys. Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://iopscience.iop.org/article/10.1088/2515-7647/ace869/meta

Journal ref: J. Phys. Photonics 5 042501 (2023)

Rydberg-atom-based single-photon detection for haloscope axion searches

Authors: Eleanor Graham, Sumita Ghosh, Yuqi Zhu, Xiran Bai, Sidney B. Cahn, Elsa Durcan, Michael J. Jewell, Danielle H. Speller, Sabrina M. Zacarias, Laura T. Zhou, Reina H. Maruyama

Abstract: We propose a Rydberg-atom-based single-photon detector for signal readout in dark matter haloscope experiments between 40 $μ$eV and 200 $μ$eV (10 GHz and 50 GHz). At these frequencies, standard haloscope readout using linear amplifiers is limited by quantum measurement noise, which can be avoided by using a single-photon detector. Our single-photon detection scheme can offer scan rate enhancements… ▽ More We propose a Rydberg-atom-based single-photon detector for signal readout in dark matter haloscope experiments between 40 $μ$eV and 200 $μ$eV (10 GHz and 50 GHz). At these frequencies, standard haloscope readout using linear amplifiers is limited by quantum measurement noise, which can be avoided by using a single-photon detector. Our single-photon detection scheme can offer scan rate enhancements up to a factor of $10^4$ over traditional linear amplifier readout, and is compatible with many different haloscope cavities. We identify multiple haloscope designs that could use our Rydberg-atom-based single-photon detector to search for QCD axions with masses above 40 $μ$eV (10 GHz), currently a minimally explored parameter space. △ Less

Submitted 10 November, 2023; v1 submitted 23 October, 2023; originally announced October 2023.

Comments: 15 pages, 8 figures

The path to detecting extraterrestrial life with astrophotonics

Authors: Nemanja Jovanovic, Yinzi Xin, Michael P. Fitzgerald, Olivier Guyon, Peter Tuthill, Barnaby Norris, Pradip Gatkine, Greg Sercel, Svarun Soda, Yoo Jung Kim, Jonathan Lin, Sergio Leon-Saval, Rodrigo Amezcua-Correa, Stephanos Yerolatsitis, Julien Lozi, Sebastien Vievard, Chris Betters, Steph Sallum, Daniel Levinstein, Dimitri Mawet, Jeffrey Jewell, J. Kent Wallace, Nick Cvetojevic

Abstract: Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far,… ▽ More Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a ga** void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life. △ Less

Submitted 15 September, 2023; originally announced September 2023.

Comments: 9 pages, 2 figures, SPIE Optics and Photonics conference

Report number: 12680-17

Dual Purpose Lyot Coronagraph Masks for Simultaneous High-Contrast Imaging and High-Resolution Wavefront Sensing

Authors: Garreth Ruane, J. Kent Wallace, A J Eldorado Riggs, Tobias Wenger, Mahmood Bagheri, Jeffrey Jewell, Nasrat Raouf, Gregory Allan, Camilo Mejia Prada, Matthew Noyes, Alex B. Walter

Abstract: Directly imaging Earth-sized exoplanets with a visible-light coronagraph instrument on a space telescope will require a system that can achieve $\sim10^{-10}$ raw contrast and maintain it for the duration of observations (on the order of hours or more). We are designing, manufacturing, and testing Dual Purpose Lyot coronagraph (DPLC) masks that allow for simultaneous wavefront sensing and control… ▽ More Directly imaging Earth-sized exoplanets with a visible-light coronagraph instrument on a space telescope will require a system that can achieve $\sim10^{-10}$ raw contrast and maintain it for the duration of observations (on the order of hours or more). We are designing, manufacturing, and testing Dual Purpose Lyot coronagraph (DPLC) masks that allow for simultaneous wavefront sensing and control using out-of-band light to maintain high contrast in the science focal plane. Our initial design uses a tiered metallic focal plane occulter to suppress starlight in the transmitted coronagraph channel and a dichroic-coated substrate to reflect out-of-band light to a wavefront sensing camera. The occulter design introduces a phase shift such that the reflected channel is a Zernike wavefront sensor. The dichroic coating allows higher-order wavefront errors to be detected which is especially critical for compensating for residual drifts from an actively-controlled segmented primary mirror. A second-generation design concept includes a metasurface to create polarization-dependent phase shifts in the reflected beam, which has several advantages including an extended dynamic range. We will present the focal plane mask designs, characterization, and initial testing at NASA's High Contrast Imaging Testbed (HCIT) facility. △ Less

Submitted 20 August, 2023; originally announced August 2023.

Comments: To appear in the Proceedings of the SPIE, Techniques and Instrumentation for Detection of Exoplanets XI

On the use of dielectric elements in axion searches with microwave resonant cavities

Authors: Xiran Bai, Michael J. Jewell, Steve K. Lamoreaux, Reina H. Maruyama, Karl van Bibber

Abstract: This study explores the primary effects of dielectric materials in a resonant cavity-based search for axion dark matter. While dielectrics prove beneficial in numerous cases, their incorporation may lead to less-than-optimal performance, especially for the lowest TM mode. Additionally, the stronger confinement of the electric field inside the dielectrics can exacerbate mode mixings, in particular… ▽ More This study explores the primary effects of dielectric materials in a resonant cavity-based search for axion dark matter. While dielectrics prove beneficial in numerous cases, their incorporation may lead to less-than-optimal performance, especially for the lowest TM mode. Additionally, the stronger confinement of the electric field inside the dielectrics can exacerbate mode mixings, in particular for higher-order modes. Case studies have been carried out using a combination of analytical solutions and numerical simulations. The findings indicate dielectric cavities employing the $\text{TM}_{010}$ mode experience a significant reduction in sensitivity when compared to a similar search conducted in a cavity at equivalent frequency using no dielectrics. △ Less

Submitted 13 April, 2023; originally announced April 2023.

Comments: 10 pages, 7 figures

Journal ref: 2023_JINST_18_P07017

Generative Adversarial Networks for Scintillation Signal Simulation in EXO-200

Authors: S. Li, I. Ostrovskiy, Z. Li, L. Yang, S. Al Kharusi, G. Anton, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, L. Darroch, S. J. Daugherty, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian , et al. (65 additional authors not shown)

Abstract: Generative Adversarial Networks trained on samples of simulated or actual events have been proposed as a way of generating large simulated datasets at a reduced computational cost. In this work, a novel approach to perform the simulation of photodetector signals from the time projection chamber of the EXO-200 experiment is demonstrated. The method is based on a Wasserstein Generative Adversarial N… ▽ More Generative Adversarial Networks trained on samples of simulated or actual events have been proposed as a way of generating large simulated datasets at a reduced computational cost. In this work, a novel approach to perform the simulation of photodetector signals from the time projection chamber of the EXO-200 experiment is demonstrated. The method is based on a Wasserstein Generative Adversarial Network - a deep learning technique allowing for implicit non-parametric estimation of the population distribution for a given set of objects. Our network is trained on real calibration data using raw scintillation waveforms as input. We find that it is able to produce high-quality simulated waveforms an order of magnitude faster than the traditional simulation approach and, importantly, generalize from the training sample and discern salient high-level features of the data. In particular, the network correctly deduces position dependency of scintillation light response in the detector and correctly recognizes dead photodetector channels. The network output is then integrated into the EXO-200 analysis framework to show that the standard EXO-200 reconstruction routine processes the simulated waveforms to produce energy distributions comparable to that of real waveforms. Finally, the remaining discrepancies and potential ways to improve the approach further are highlighted. △ Less

Submitted 8 May, 2023; v1 submitted 11 March, 2023; originally announced March 2023.

Comments: As accepted by JINST

Journal ref: JINST 18 P06005 2023

New Results from HAYSTAC's Phase II Operation with a Squeezed State Receiver

Authors: HAYSTAC Collaboration, M. J. Jewell, A. F. Leder, K. M. Backes, Xiran Bai, K. van Bibber, B. M. Brubaker, S. B. Cahn, A. Droster, Maryam H. Esmat, Sumita Ghosh, Eleanor Graham, Gene C. Hilton, H. Jackson, Claire Laffan, S. K. Lamoreaux, K. W. Lehnert, S. M. Lewis, M. Malnou, R. H. Maruyama, D. A. Palken, N. M. Rapidis, E. P. Ruddy, M. Simanovskaia, Sukhman Singh , et al. (4 additional authors not shown)

Abstract: A search for dark matter axions with masses $>10 μeV/c^{2}$ has been performed using the HAYSTAC experiment's squeezed state receiver to achieve sub-quantum limited noise. This report includes details of the design and operation of the experiment previously used to search for axions in the mass ranges $16.96-17.12$ and $17.14-17.28 μeV/c^{2}$($4.100-4.140$GHz) and $4.145-4.178$GHz) as well as upgr… ▽ More A search for dark matter axions with masses $>10 μeV/c^{2}$ has been performed using the HAYSTAC experiment's squeezed state receiver to achieve sub-quantum limited noise. This report includes details of the design and operation of the experiment previously used to search for axions in the mass ranges $16.96-17.12$ and $17.14-17.28 μeV/c^{2}$($4.100-4.140$GHz) and $4.145-4.178$GHz) as well as upgrades to facilitate an extended search at higher masses. These upgrades include improvements to the data acquisition routine which have reduced the effective dead time by a factor of 5, allowing for the new region to be scanned $\sim$1.6 times faster with comparable sensitivity. No statistically significant evidence of an axion signal is found in the range $18.44-18.71μeV/c^{2}$($4.459-4.523$GHz), leading to an aggregate upper limit exclusion at the $90\%$ level on the axion-photon coupling of $2.06\times g_γ^{KSVZ}$. △ Less

Submitted 26 January, 2023; v1 submitted 23 January, 2023; originally announced January 2023.

Comments: 20 pages, 16 figures

An improved synthetic signal injection routine for the Haloscope At Yale Sensitive To Axion Cold dark matter (HAYSTAC)

Authors: Yuqi Zhu, M. J. Jewell, Claire Laffan, Xiran Bai, Sumita Ghosh, Eleanor Graham, S. B. Cahn, Reina H. Maruyama, S. K. Lamoreaux

Abstract: Microwave cavity haloscopes are among the most sensitive direct detection experiments searching for dark matter axions via their coupling to photons. When the power of the expected microwave signal due to axion-photon conversion is on the order of $10^{-24}$~W, having the ability to validate the detector response and analysis procedure by injecting realistic synthetic axion signals becomes helpful… ▽ More Microwave cavity haloscopes are among the most sensitive direct detection experiments searching for dark matter axions via their coupling to photons. When the power of the expected microwave signal due to axion-photon conversion is on the order of $10^{-24}$~W, having the ability to validate the detector response and analysis procedure by injecting realistic synthetic axion signals becomes helpful. Here we present a method based on frequency hop** spread spectrum for synthesizing axion signals in a microwave cavity haloscope experiment. It allows us to generate a narrow and asymmetric shape in frequency space that mimics an axion's spectral distribution, which is derived from a Maxwell-Boltzmann distribution. In addition, we show that the synthetic axion's power can be calibrated with reference to the system noise. Compared to the synthetic axion injection in HAYSTAC phase I, we demonstrated synthetic signal injection with a more realistic lineshape and calibrated power. △ Less

Submitted 12 May, 2023; v1 submitted 1 December, 2022; originally announced December 2022.

Journal ref: Rev. Sci. Instrum. 94, 054712 (2023)

Flattening laser frequency comb spectra with a high dynamic range, broadband spectral shaper on-a-chip

Authors: Nemanja Jovanovic, Pradip Gatkine, Boqiang Shen, Maodong Gao, Nick Cvetojevic, Katarzyna Lawniczuk, Ronald Broeke, Charles Beichman, Stephanie Leifer, Jeffery Jewell, Gautam Vasisht, Dimitri Mawet

Abstract: Spectral sha** is critical to many fields of science. In astronomy for example, the detection of exoplanets via the Doppler effect hinges on the ability to calibrate a high resolution spectrograph. Laser frequency combs can be used for this, but the wildly varying intensity across the spectrum can make it impossible to optimally utilize the entire comb, leading to a reduced overall precision of… ▽ More Spectral sha** is critical to many fields of science. In astronomy for example, the detection of exoplanets via the Doppler effect hinges on the ability to calibrate a high resolution spectrograph. Laser frequency combs can be used for this, but the wildly varying intensity across the spectrum can make it impossible to optimally utilize the entire comb, leading to a reduced overall precision of calibration. To circumvent this, astronomical applications of laser frequency combs rely on a bulk optic setup which can flatten the output spectrum before sending it to the spectrograph. Such flatteners require complex and expensive optical elements like spatial light modulators and have non-negligible bench top footprints. Here we present an alternative in the form of an all-photonic spectral shaper that can be used to flatten the spectrum of a laser frequency comb. The device consists of a circuit etched into a silicon nitride wafer that supports an arrayed-waveguide grating to disperse the light over hundreds of nanometers in wavelength, followed by Mach-Zehnder interferometers to control the amplitude of each channel, thermo-optic phase modulators to phase the channels and a second arrayed-waveguide grating to recombine the spectrum. The demonstrator device operates from 1400 to 1800 nm (covering the astronomical H band), with twenty 20 nm wide channels. The device allows for nearly 40 dBs of dynamic modulation of the spectrum via the Mach-Zehnders , which is greater than that offered by most spatial light modulators. With a superluminescent diode, we reduced the static spectral variation to ~3 dB, limited by the properties of the components used in the circuit and on a laser frequency comb we managed to reduce the modulation to 5 dBs, sufficient for astronomical applications. △ Less

Submitted 3 October, 2022; originally announced October 2022.

Comments: 15 pages, 10 figures. arXiv admin note: substantial text overlap with arXiv:2209.09455

Journal ref: Opt. Express 30, 36745-36760 (2022)

An all-photonic, dynamic device for flattening the spectrum of a laser frequency comb for precise calibration of radial velocity measurements

Authors: Nemanja Jovanovic, Pradip Gatkine, Boqiang Shen, Maodong Gao, Nick Cvetojevic, Katarzyna Ławniczuk, Ronald Broeke, Charles Beichman, Stephanie Leifer, Jeffery Jewell, Gautam Vasisht, Dimitri Mawet

Abstract: Laser frequency combs are fast becoming critical to reaching the highest radial velocity precisions. One shortcoming is the highly variable brightness of the comb lines across the spectrum (up to 4-5 orders of magnitude). This can result in some lines saturating while others are at low signal and lost in the noise. Losing lines to either of these effects reduces the precision and hence effectivene… ▽ More Laser frequency combs are fast becoming critical to reaching the highest radial velocity precisions. One shortcoming is the highly variable brightness of the comb lines across the spectrum (up to 4-5 orders of magnitude). This can result in some lines saturating while others are at low signal and lost in the noise. Losing lines to either of these effects reduces the precision and hence effectiveness of the comb. In addition, the brightness of the comb lines can vary with time which could drive comb lines with initially reasonable SNR's into the two regimes described above. To mitigate these two effects, laser frequency combs use optical flattener's. Flattener's are typically bulk optic setups that disperse the comb light with a grating, and then use a spatial light modulator to control the amplitude across the spectrum before recombining the light into another single mode fiber and sending it to the spectrograph. These setups can be large (small bench top), expensive (several hundred thousand dollars) and have limited stability. To address these issues, we have developed an all-photonic spectrum flattener on a chip. The device is constructed from optical waveguides on a SiN chip. The light from the laser frequency comb's output optical fiber can be directly connected to the chip, where the light is first dispersed using an arrayed waveguide grating. To control the brightness of each channel, the light is passed through a Mach-Zehnder interferometer before being recombined with a second arrayed waveguide grating. Thermo-optic phase modulators are used in each channel before recombination to path length match the channels as needed. Here we present the results from our first generation prototype. The device operates from 1400-1800 nm (covering the H band), with 20, 20 nm wide channels. △ Less

Submitted 20 September, 2022; originally announced September 2022.

Comments: 7 pages, 5 figures, conference

Journal ref: Proc. SPIE 12188, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V, 121885D (29 August 2022);

Axion Dark Matter

Authors: C. B. Adams, N. Aggarwal, A. Agrawal, R. Balafendiev, C. Bartram, M. Baryakhtar, H. Bekker, P. Belov, K. K. Berggren, A. Berlin, C. Boutan, D. Bowring, D. Budker, A. Caldwell, P. Carenza, G. Carosi, R. Cervantes, S. S. Chakrabarty, S. Chaudhuri, T. Y. Chen, S. Cheong, A. Chou, R. T. Co, J. Conrad, D. Croon , et al. (130 additional authors not shown)

Abstract: Axions are well-motivated dark matter candidates with simple cosmological production mechanisms. They were originally introduced to solve the strong CP problem, but also arise in a wide range of extensions to the Standard Model. This Snowmass white paper summarizes axion phenomenology and outlines next-generation laboratory experiments proposed to detect axion dark matter. There are vibrant synerg… ▽ More Axions are well-motivated dark matter candidates with simple cosmological production mechanisms. They were originally introduced to solve the strong CP problem, but also arise in a wide range of extensions to the Standard Model. This Snowmass white paper summarizes axion phenomenology and outlines next-generation laboratory experiments proposed to detect axion dark matter. There are vibrant synergies with astrophysical searches and advances in instrumentation including quantum-enabled readout, high-Q resonators and cavities and large high-field magnets. This white paper outlines a clear roadmap to discovery, and shows that the US is well-positioned to be at the forefront of the search for axion dark matter in the coming decade. △ Less

Submitted 29 March, 2023; v1 submitted 28 March, 2022; originally announced March 2022.

Comments: restore and expand author list

Simulating the Study of Exoplanets Using Photonic Spectrographs

Authors: Marcos Perez, Pradip Gatkine, Nemanja Jovanovic, Jeffrey Jewell, J. Kent Wallace, Dimitri Mawet

Abstract: Photonic spectrographs offer a highly miniaturized, flexible, and stable on-chip solution for astronomical spectroscopy and can be used for various science cases such as determining the atmospheric composition of exoplanets to understand their habitability, formation, and evolution. Arrayed Waveguide Gratings (AWGs) have shown the best promise to be used as an astrophotonic spectrograph. We develo… ▽ More Photonic spectrographs offer a highly miniaturized, flexible, and stable on-chip solution for astronomical spectroscopy and can be used for various science cases such as determining the atmospheric composition of exoplanets to understand their habitability, formation, and evolution. Arrayed Waveguide Gratings (AWGs) have shown the best promise to be used as an astrophotonic spectrograph. We developed a publically-available tool to conduct a preliminary examination of the capability of the AWGs in spectrally resolving exoplanet atmospheres. We derived the Line-Spread-Function (LSF) as a function of wavelength and the Full-Width-at-Half-Maximum (FWHM) of the LSF as a function of spectral line width to evaluate the response of a discretely- and continuously-sampled low-resolution AWG (R $\sim$ 1000). We observed that the LSF has minimal wavelength dependence ($\sim$5\%), irrespective of the offset with respect to the center-wavelengths of the AWG channels, contrary to the previous assumptions. We further confirmed that the observed FWHM scales linearly with the emission line width. Finally, we present simulated extraction of a sample molecular absorption spectrum with the discretely- and continuously-sampled low-resolution AWGs. From this, we show that while the discrete AWG matches its expected resolving power, the continuous AWG spectrograph can, in principle, achieve an effective resolution significantly greater ($\sim$ 2x) than the discrete AWG. This detailed examination of the AWGs will be foundational for future deployment of AWG spectrographs for astronomical science cases such as exoplanet atmospheres. △ Less

Submitted 18 March, 2022; originally announced March 2022.

Comments: 13 pages, 6 figures, Presented at and published in the proceedings of SPIE Photonics West 2022

Journal ref: Proc. SPIE 12008, Photonic Instrumentation Engineering IX, 120080C (Presented at SPIE OPTO: 5 March 2022; Published: 5 March 2022)

An on-chip astrophotonic spectrograph with a resolving power of 12,000

Authors: Pradip Gatkine, Nemanja Jovanovic, Jeffrey Jewell, J. Kent Wallace, Dimitri Mawet

Abstract: With the upcoming extremely large telescopes (ELTs), the volume, mass, and cost of the associated spectrographs will scale with the telescope diameter. Astrophotonics offers a unique solution to this problem in the form of single-mode fiber-fed diffraction-limited spectrographs on a chip. These highly miniaturized chips offer great flexibility in terms of coherent manipulation of photons. Such pho… ▽ More With the upcoming extremely large telescopes (ELTs), the volume, mass, and cost of the associated spectrographs will scale with the telescope diameter. Astrophotonics offers a unique solution to this problem in the form of single-mode fiber-fed diffraction-limited spectrographs on a chip. These highly miniaturized chips offer great flexibility in terms of coherent manipulation of photons. Such photonic spectrographs are well-suited to disperse the light from directly imaged planets (post-coronagraph, collected using a single-mode fiber) to characterize exoplanet atmospheres. Here we present the results from a proof-of-concept high-resolution astrophotonic spectrograph using the arrayed waveguide gratings (AWG) architecture. This chip uses the low-loss SiN platform (SiN core, SiO$_2$ cladding) with square waveguides (800 nm $\times$ 800 nm). The AWG has a measured resolving power ($λ/δλ$) of $\sim$ 12,000 and a free spectral range (FSR) of 2.8 nm. While the FSR is small, the chip operates over a broad band (1200 $-$ 1700 nm). The peak on-chip throughput (excluding the coupling efficiency) is $\sim$40\% (- 4 dB) and the overall throughput (including the coupling loss) is $\sim$ 11\% (- 9.6 dB) in the TE mode. Thanks to the high-confinement waveguide geometry, the chip is highly miniaturized with a size of only 7.4 mm $\times$ 2 mm. This demonstration highlights the utility of SiN platform for astrophotonics, particularly, the capability of commercial SiN foundries to fabricate ultra-small, high-resolution, high-throughput AWG spectrographs on a chip suitable for both ground- and space-based telescopes. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Comments: 10 pages, 7 figures, Published in the proceedings of SPIE Optics + Photonics conference 2021

Journal ref: Proc. SPIE 11819, UV/Optical/IR Space Telescopes and Instruments: Innovative Technologies and Concepts X, 118190I (20 August 2021)

EIT spectroscopy of high-lying Rydberg states in $^{39}K$

Authors: Yuqi Zhu, Sumita Ghosh, S. B. Cahn, M. J. Jewell, D. H. Speller, Reina H. Maruyama

Abstract: We present a study of the Rydberg spectrum in $^{39}K$ for $nS$ and $nD_{3/2}$ series connected to $5^2P_{1/2}$ using two-photon spectroscopy based on EIT in a heated vapor cell. We observed some 80 transitions from $5P_{1/2}$ to Rydberg states with principal quantum numbers $n\sim50-90$, and determined their transition frequencies and state energies with sub-GHz precision. Our spectroscopy result… ▽ More We present a study of the Rydberg spectrum in $^{39}K$ for $nS$ and $nD_{3/2}$ series connected to $5^2P_{1/2}$ using two-photon spectroscopy based on EIT in a heated vapor cell. We observed some 80 transitions from $5P_{1/2}$ to Rydberg states with principal quantum numbers $n\sim50-90$, and determined their transition frequencies and state energies with sub-GHz precision. Our spectroscopy results lay the groundwork for using Rydberg atoms as sensitive microwave photon detectors in searches for dark matter axions in the $\sim40-200$ $μ$eV mass range, which is a prime range for future axion searches suggested by theory studies. △ Less

Submitted 8 March, 2022; v1 submitted 8 December, 2021; originally announced December 2021.

Journal ref: Physical Review A 105, 042808 (2022)

Feasibility trade-offs in decarbonisation of power sector with high coal dependence: A case of Korea

Authors: Minwoo Hyun, Aleh Cherp, Jessica Jewell, Yeong Jae Kim, Jiyong Eom

Abstract: Decarbonisation of the power sector requires feasible strategies for rapid phase-out of fossil fuels and expansion of low-carbon sources. This study develops and uses a model with an explicit account of power plant stocks to explore plausible decarbonization scenarios of the power sector in the Republic of Korea through 2050 and 2060. The results show that achieving zero emissions from the power s… ▽ More Decarbonisation of the power sector requires feasible strategies for rapid phase-out of fossil fuels and expansion of low-carbon sources. This study develops and uses a model with an explicit account of power plant stocks to explore plausible decarbonization scenarios of the power sector in the Republic of Korea through 2050 and 2060. The results show that achieving zero emissions from the power sector by the mid-century requires either ambitious expansion of renewables backed by gas-fired generation equipped with carbon capture and storage or significant expansion of nuclear power. The first strategy implies replicating and maintaining for decades maximum growth rates of solar power achieved in leading countries and becoming an early and ambitious adopter of the CCS technology. The alternative expansion of nuclear power has historical precedents in Korea and other countries but may not be acceptable in the current political and regulatory environment. △ Less

Submitted 25 October, 2021; originally announced November 2021.

The EXO-200 detector, part II: Auxiliary Systems

Authors: N. Ackerman, J. Albert, M. Auger, D. J. Auty, I. Badhrees, P. S. Barbeau, L. Bartoszek, E. Baussan, V. Belov, C. Benitez-Medina, T. Bhatta, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, R. Conley, S. Cook, M. Coon, W. Craddock, A. Craycraft, W. Cree, T. Daniels, L. Darroch , et al. (135 additional authors not shown)

Abstract: The EXO-200 experiment searched for neutrinoless double-beta decay of $^{136}$Xe with a single-phase liquid xenon detector. It used an active mass of 110 kg of 80.6%-enriched liquid xenon in an ultra-low background time projection chamber with ionization and scintillation detection and readout. This paper describes the design and performance of the various support systems necessary for detector op… ▽ More The EXO-200 experiment searched for neutrinoless double-beta decay of $^{136}$Xe with a single-phase liquid xenon detector. It used an active mass of 110 kg of 80.6%-enriched liquid xenon in an ultra-low background time projection chamber with ionization and scintillation detection and readout. This paper describes the design and performance of the various support systems necessary for detector operation, including cryogenics, xenon handling, and controls. Novel features of the system were driven by the need to protect the thin-walled detector chamber containing the liquid xenon, to achieve high chemical purity of the Xe, and to maintain thermal uniformity across the detector. △ Less

Submitted 22 October, 2021; v1 submitted 13 July, 2021; originally announced July 2021.

Comments: Manuscript updated in response to JINST reviewer comments

Potential of commercial SiN MPW platforms for develo** mid/high-resolution integrated photonic spectrographs for astronomy

Authors: Pradip Gatkine, Nemanja Jovanovic, Christopher Hopgood, Simon Ellis, Ronald Broeke, Katarzyna Ławniczuk, Jeffrey Jewell, J. Kent Wallace, Dimitri Mawet

Abstract: Integrated photonic spectrographs offer an avenue to extreme miniaturization of astronomical instruments, which would greatly benefit extremely large telescopes and future space missions. These devices first require optimization for astronomical applications, which includes design, fabrication and field-testing. Given the high costs of photonic fabrication, Multi-Project Wafer (MPW) SiN offerings,… ▽ More Integrated photonic spectrographs offer an avenue to extreme miniaturization of astronomical instruments, which would greatly benefit extremely large telescopes and future space missions. These devices first require optimization for astronomical applications, which includes design, fabrication and field-testing. Given the high costs of photonic fabrication, Multi-Project Wafer (MPW) SiN offerings, where a user purchases a portion of a wafer, provide a convenient and affordable avenue to develop this technology. In this work we study the potential of two commonly used SiN waveguide geometries by MPW foundries, i.e. square and rectangular profiles to determine how they affect the performance of mid-high resolution arrayed waveguide grating spectrometers around 1.5 $μ$m. Specifically, we present results from detailed simulations on the mode sizes, shapes, and polarization properties, and on the impact of phase errors on the throughput and cross talk as well as some laboratory results of coupling and propagation losses. From the MPW-run tolerances and our phase-error study, we estimate that an AWG with R $\sim$ 10,000 can be developed with the MPW runs and even greater resolving power is achievable with more reliable, dedicated fabrication runs. Depending on the fabrication and design optimizations, it is possible to achieve throughputs $\sim 60\%$ using the SiN platform. Thus, we show that SiN MPW offerings are highly promising and will play a key role in integrated photonic spectrograph developments for astronomy. △ Less

Submitted 8 June, 2021; originally announced June 2021.

Comments: Accepted at Applied Optics, Special Issue on Astrophotonics (24 pages, 13 figures, 3 tables)

Journal ref: Applied Optics Vol. 60, Issue 19, pp. D15-D32 (2021)

Wavefront sensing and control in space-based coronagraph instruments using Zernike's phase-contrast method

Authors: Garreth Ruane, J. Kent Wallace, John Steeves, Camilo Mejia Prada, Byoung-Joon Seo, Eduardo Bendek, Carl Coker, Pin Chen, Brendan Crill, Jeff Jewell, Brian Kern, David Marx, Phillip K. Poon, David Redding, A J Eldorado Riggs, Nicholas Siegler, Robert Zimmer

Abstract: Future space telescopes with coronagraph instruments will use a wavefront sensor (WFS) to measure and correct for phase errors and stabilize the stellar intensity in high-contrast images. The HabEx and LUVOIR mission concepts baseline a Zernike wavefront sensor (ZWFS), which uses Zernike's phase contrast method to convert phase in the pupil into intensity at the WFS detector. In preparation for th… ▽ More Future space telescopes with coronagraph instruments will use a wavefront sensor (WFS) to measure and correct for phase errors and stabilize the stellar intensity in high-contrast images. The HabEx and LUVOIR mission concepts baseline a Zernike wavefront sensor (ZWFS), which uses Zernike's phase contrast method to convert phase in the pupil into intensity at the WFS detector. In preparation for these potential future missions, we experimentally demonstrate a ZWFS in a coronagraph instrument on the Decadal Survey Testbed in the High Contrast Imaging Testbed facility at NASA's Jet Propulsion Laboratory. We validate that the ZWFS can measure low- and mid-spatial frequency aberrations up to the control limit of the deformable mirror, with surface height sensitivity as small as 1 pm, using a configuration similar to the HabEx and LUVOIR concepts. Furthermore, we demonstrate closed-loop control, resolving an individual DM actuator, with residuals consistent with theoretical models. In addition, we predict the expected performance of a ZWFS on future space telescopes using natural starlight from a variety of spectral types. The most challenging scenarios require ~1 hr of integration time to achieve picometer sensitivity. This timescale may be drastically reduced by using internal or external laser sources for sensing purposes. The experimental results and theoretical predictions presented here advance the WFS technology in the context of the next generation of space telescopes with coronagraph instruments. △ Less

Submitted 3 November, 2020; v1 submitted 20 October, 2020; originally announced October 2020.

Comments: Accepted for publication in JATIS

Journal ref: J. Astron. Telesc. Instrum. Syst. 6(4), 045005 (2020)

Event Reconstruction in a Liquid Xenon Time Projection Chamber with an Optically-Open Field Cage

Authors: T. Stiegler, S. Sangiorgio, J. P. Brodsky, M. Heffner, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, A. Bolotnikov, P. A. Breur, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Cao, C. Chambers, B. Chana, S. A. Charlebois, M. Chiu, B. Cleveland, M. Coon , et al. (126 additional authors not shown)

Abstract: nEXO is a proposed tonne-scale neutrinoless double beta decay ($0νββ$) experiment using liquid ${}^{136}Xe$ (LXe) in a Time Projection Chamber (TPC) to read out ionization and scintillation signals. Between the field cage and the LXe vessel, a layer of LXe ("skin" LXe) is present, where no ionization signal is collected. Only scintillation photons are detected, owing to the lack of optical barrier… ▽ More nEXO is a proposed tonne-scale neutrinoless double beta decay ($0νββ$) experiment using liquid ${}^{136}Xe$ (LXe) in a Time Projection Chamber (TPC) to read out ionization and scintillation signals. Between the field cage and the LXe vessel, a layer of LXe ("skin" LXe) is present, where no ionization signal is collected. Only scintillation photons are detected, owing to the lack of optical barrier around the field cage. In this work, we show that the light originating in the skin LXe region can be used to improve background discrimination by 5% over previous published estimates. This improvement comes from two elements. First, a fraction of the $γ$-ray background is removed by identifying light from interactions with an energy deposition in the skin LXe. Second, background from ${}^{222}Rn$ dissolved in the skin LXe can be efficiently rejected by tagging the $α$ decay in the ${}^{214}Bi-{}^{214}Po$ chain in the skin LXe. △ Less

Submitted 24 March, 2021; v1 submitted 21 September, 2020; originally announced September 2020.

Comments: 11 pages, 12 figures

Report number: LLNL-JRNL-814563

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1000 (2021) 165239

Robust numerical computation of the 3D scalar potential field of the cubic Galileon gravity model at solar system scales

Authors: Nicholas C. White, Sandra M. Troian, Jeffrey B. Jewell, Curt J. Cutler, Sheng-wey Chiow, Nan Yu

Abstract: Direct detection of dark energy or modified gravity may finally be within reach due to ultrasensitive instrumentation such as atom interferometry capable of detecting incredibly small scale accelerations. Forecasts, constraints and measurement bounds can now too perhaps be estimated from accurate numerical simulations of the fifth force and its Laplacian field at solar system scales. The cubic Gal… ▽ More Direct detection of dark energy or modified gravity may finally be within reach due to ultrasensitive instrumentation such as atom interferometry capable of detecting incredibly small scale accelerations. Forecasts, constraints and measurement bounds can now too perhaps be estimated from accurate numerical simulations of the fifth force and its Laplacian field at solar system scales. The cubic Galileon gravity scalar field model (CGG), which derives from the DGP braneworld model, describes modified gravity incorporating a Vainshtein screening mechanism. The nonlinear derivative interactions in the CGG equation suppress the field near regions of high density, thereby restoring general relativity (GR) while far from such regions, field enhancement is comparable to GR and the equation is dominated by a linear term. This feature of the governing PDE poses some numerical challenges for computation of the scalar potential, force and Laplacian fields even under stationary conditions. Here we present a numerical method based on finite differences for solution of the static CGG scalar field for a 2D axisymmetric Sun-Earth system and a 3D Cartesian Sun-Earth-Moon system. The method relies on gradient descent of an integrated residual based on the normal attractive branch of the CGG equation. The algorithm is shown to be stable, accurate and rapidly convergent toward the global minimum state. We hope this numerical study, which can easily be extended to include smaller bodies such as detection satellites, will prove useful to future measurement of modified gravity force fields at solar system scales. △ Less

Submitted 6 March, 2020; v1 submitted 2 March, 2020; originally announced March 2020.

Comments: 30 pages, 15 figures. Submitted to Physical Review D. (Version 2 fixes error in acknowledgments)

Journal ref: Phys. Rev. D 102 (2020) 024033

Reflectance of Silicon Photomultipliers at Vacuum Ultraviolet Wavelengths

Authors: P. Lv, G. F. Cao, L. J. Wen, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, P. A. Breur, J. P. Brodsky, E. Brown, T. Brunner, S. Byrne Mamahit, E. Caden, L. Cao, C. Chambers, B. Chana, S. A. Charlebois, M. Chiu, B. Cleveland, M. Coon, A. Craycraft , et al. (126 additional authors not shown)

Abstract: Characterization of the vacuum ultraviolet (VUV) reflectance of silicon photomultipliers (SiPMs) is important for large-scale SiPM-based photodetector systems. We report the angular dependence of the specular reflectance in a vacuum of SiPMs manufactured by Fondazionc Bruno Kessler (FBK) and Hamamatsu Photonics K.K. (HPK) over wavelengths ranging from 120 nm to 280 nm. Refractive index and extinct… ▽ More Characterization of the vacuum ultraviolet (VUV) reflectance of silicon photomultipliers (SiPMs) is important for large-scale SiPM-based photodetector systems. We report the angular dependence of the specular reflectance in a vacuum of SiPMs manufactured by Fondazionc Bruno Kessler (FBK) and Hamamatsu Photonics K.K. (HPK) over wavelengths ranging from 120 nm to 280 nm. Refractive index and extinction coefficient of the thin silicon-dioxide film deposited on the surface of the FBK SiPMs are derived from reflectance data of a FBK silicon wafer with the same deposited oxide film as SiPMs. The diffuse reflectance of SiPMs is also measured at 193 nm. We use the VUV spectral dependence of the optical constants to predict the reflectance of the FBK silicon wafer and FBK SiPMs in liquid xenon. △ Less

Submitted 4 December, 2019; originally announced December 2019.

Measurements of electron transport in liquid and gas Xenon using a laser-driven photocathode

Authors: O. Njoya, T. Tsang, M. Tarka, W. Fairbank, K. S. Kumar, T. Rao, T. Wager, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. P. Brodsky, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Cao, W. R. Cen, C. Chambers, B. Chana, S. A. Charlebois , et al. (131 additional authors not shown)

Abstract: Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semi-transparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measur… ▽ More Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semi-transparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measured drift velocities and corresponding temperature coefficients respectively are $1.97 \pm 0.04$ mm/$μ$s and $(-0.69\pm0.05)$\%/K for liquid xenon, and $1.42 \pm 0.03$ mm/$μ$s and $(+0.11\pm0.01)$\%/K for gaseous xenon at 1.5 bar. In addition, we measure longitudinal diffusion coefficients of $25.7 \pm 4.6$ cm$^2$/s and $149 \pm 23$ cm$^2$/s, for liquid and gas, respectively. The quantum efficiency of the gold photocathode is studied at the photon energy of 4.73 eV in liquid and gaseous xenon, and vacuum. These charge transport properties and the behavior of photocathodes in a xenon environment are important in designing and calibrating future large scale noble liquid detectors. △ Less

Submitted 24 November, 2019; originally announced November 2019.

Reflectivity and PDE of VUV4 Hamamatsu SiPMs in Liquid Xenon

Authors: P. Nakarmi, I. Ostrovskiy, A. K. Soma, F. Retiere, S. Al Kharusi, M. Alfaris, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. Blatchford, P. A. Breur, J. P. Brodsky, E. Brown, T. Brunner, S. Byrne Mamahit, E. Caden, G. F. Cao, L. Cao, C. Chambers, B. Chana, S. A. Charlebois , et al. (130 additional authors not shown)

Abstract: Understanding reflective properties of materials and photodetection efficiency (PDE) of photodetectors is important for optimizing energy resolution and sensitivity of the next generation neutrinoless double beta decay, direct detection dark matter, and neutrino oscillation experiments that will use noble liquid gases, such as nEXO, DARWIN, DarkSide-20k, and DUNE. Little information is currently a… ▽ More Understanding reflective properties of materials and photodetection efficiency (PDE) of photodetectors is important for optimizing energy resolution and sensitivity of the next generation neutrinoless double beta decay, direct detection dark matter, and neutrino oscillation experiments that will use noble liquid gases, such as nEXO, DARWIN, DarkSide-20k, and DUNE. Little information is currently available about reflectivity and PDE in liquid noble gases, because such measurements are difficult to conduct in a cryogenic environment and at short enough wavelengths. Here we report a measurement of specular reflectivity and relative PDE of Hamamatsu VUV4 silicon photomultipliers (SiPMs) with 50 micrometer micro-cells conducted with xenon scintillation light (~175 nm) in liquid xenon. The specular reflectivity at 15 deg. incidence of three samples of VUV4 SiPMs is found to be 30.4+/-1.4%, 28.6+/-1.3%, and 28.0+/-1.3%, respectively. The PDE at normal incidence differs by +/-8% (standard deviation) among the three devices. The angular dependence of the reflectivity and PDE was also measured for one of the SiPMs. Both the reflectivity and PDE decrease as the angle of incidence increases. This is the first measurement of an angular dependence of PDE and reflectivity of a SiPM in liquid xenon. △ Less

Submitted 24 December, 2019; v1 submitted 14 October, 2019; originally announced October 2019.

Comments: 21 pages, 15 figures, 6 tables. As accepted by JINST

Measurement of the scintillation and ionization response of liquid xenon at MeV energies in the EXO-200 experiment

Authors: EXO-200 Collaboration, :, G. Anton, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, L. Darroch, S. J. Daugherty, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian, R. DeVoe, J. Dilling, A. Dolgolenko , et al. (78 additional authors not shown)

Abstract: Liquid xenon (LXe) is employed in a number of current and future detectors for rare event searches. We use the EXO-200 experimental data to measure the absolute scintillation and ionization yields generated by $γ$ interactions from $^{228}$Th (2615~keV), $^{226}$Ra (1764~keV) and $^{60}$Co (1332~keV and 1173~keV) calibration sources, over a range of electric fields. The $W$-value that defines the… ▽ More Liquid xenon (LXe) is employed in a number of current and future detectors for rare event searches. We use the EXO-200 experimental data to measure the absolute scintillation and ionization yields generated by $γ$ interactions from $^{228}$Th (2615~keV), $^{226}$Ra (1764~keV) and $^{60}$Co (1332~keV and 1173~keV) calibration sources, over a range of electric fields. The $W$-value that defines the recombination-independent energy scale is measured to be $11.5~\pm~0.5$~(syst.)~$\pm~0.1$~(stat.) eV. These data are also used to measure the recombination fluctuations in the number of electrons and photons produced by the calibration sources at the MeV-scale, which deviate from extrapolations of lower-energy data. Additionally, a semi-empirical model for the energy resolution of the detector is developed, which is used to constrain the recombination efficiency, i.e., the fraction of recombined electrons that result in the emission of a detectable photon. Detailed measurements of the absolute charge and light yields for MeV-scale electron recoils are important for predicting the performance of future neutrinoless double beta decay detectors. △ Less

Submitted 15 June, 2020; v1 submitted 12 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. C 101, 065501 (2020)

Simulation of charge readout with segmented tiles in nEXO

Authors: Z. Li, W. R. Cen, A. Robinson, D. C. Moore, L. J. Wen, A. Odian, S. Al Kharusi, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. P. Brodsky, E. Brown, T. Brunner, E. Caden, G. F. Cao, L. Cao, C. Chambers, B. Chana, S. A. Charlebois, M. Chiu, B. Cleveland , et al. (128 additional authors not shown)

Abstract: nEXO is a proposed experiment to search for the neutrino-less double beta decay ($0νββ$) of $^{136}$Xe in a tonne-scale liquid xenon time projection chamber (TPC). The nEXO TPC will be equipped with charge collection tiles to form the anode. In this work, the charge reconstruction performance of this anode design is studied with a dedicated simulation package. A multi-variate method and a deep neu… ▽ More nEXO is a proposed experiment to search for the neutrino-less double beta decay ($0νββ$) of $^{136}$Xe in a tonne-scale liquid xenon time projection chamber (TPC). The nEXO TPC will be equipped with charge collection tiles to form the anode. In this work, the charge reconstruction performance of this anode design is studied with a dedicated simulation package. A multi-variate method and a deep neural network are developed to distinguish simulated $0νββ$ signals from backgrounds arising from trace levels of natural radioactivity in the detector materials. These simulations indicate that the nEXO TPC with charge-collection tiles shows promising capability to discriminate the $0νββ$ signal from backgrounds. The estimated half-life sensitivity for $0νββ$ decay is improved by $\sim$20$~(32)\%$ with the multi-variate~(deep neural network) methods considered here, relative to the sensitivity estimated in the nEXO pre-conceptual design report. △ Less

Submitted 11 October, 2019; v1 submitted 17 July, 2019; originally announced July 2019.

Journal ref: JINST 14 (2019) no.09, P09020

Characterization of the Hamamatsu VUV4 MPPCs for nEXO

Authors: G. Gallina, P. Giampa, F. Retiere, J. Kroeger, G. Zhang, M. Ward, P. Margetak, G. Lic, T. Tsang, L. Doria, S. Al Kharusi, M. Alfaris, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, J. Blatchford, J. P. Brodsky, E. Brown, T. Brunner, G. F. Cao, L. Cao , et al. (126 additional authors not shown)

Abstract: In this paper we report on the characterization of the Hamamatsu VUV4 (S/N: S13370-6152) Vacuum Ultra-Violet (VUV) sensitive Silicon Photo-Multipliers (SiPMs) as part of the development of a solution for the detection of liquid xenon scintillation light for the nEXO experiment. Various SiPM features, such as: dark noise, gain, correlated avalanches, direct crosstalk and Photon Detection Efficiency… ▽ More In this paper we report on the characterization of the Hamamatsu VUV4 (S/N: S13370-6152) Vacuum Ultra-Violet (VUV) sensitive Silicon Photo-Multipliers (SiPMs) as part of the development of a solution for the detection of liquid xenon scintillation light for the nEXO experiment. Various SiPM features, such as: dark noise, gain, correlated avalanches, direct crosstalk and Photon Detection Efficiency (PDE) were measured in a dedicated setup at TRIUMF. SiPMs were characterized in the range $163 \text{ } \text{K} \leq \text{T}\leq 233 \text{ } \text{K}$. At an over voltage of $3.1\pm0.2$ V and at $\text{T}=163 \text{ }\text{K}$ we report a number of Correlated Avalanches (CAs) per pulse in the $1 \upmu\text{s}$ interval following the trigger pulse of $0.161\pm0.005$. At the same settings the Dark-Noise (DN) rate is $0.137\pm0.002 \text{ Hz/mm}^{2}$. Both the number of CAs and the DN rate are within nEXO specifications. The PDE of the Hamamatsu VUV4 was measured for two different devices at $\text{T}=233 \text{ }\text{K}$ for a mean wavelength of $189\pm7\text{ nm}$. At $3.6\pm0.2$ V and $3.5\pm0.2$ V of over voltage we report a PDE of $13.4\pm2.6\text{ }\%$ and $11\pm2\%$, corresponding to a saturation PDE of $14.8\pm2.8\text{ }\%$ and $12.2\pm2.3\%$, respectively. Both values are well below the $24\text{ }\%$ saturation PDE advertised by Hamamatsu. More generally, the second device tested at $3.5\pm0.2$ V of over voltage is below the nEXO PDE requirement. The first one instead yields a PDE that is marginally close to meeting the nEXO specifications. This suggests that with modest improvements the Hamamatsu VUV4 MPPCs could be considered as an alternative to the FBK-LF SiPMs for the final design of the nEXO detector. △ Less

Submitted 7 June, 2019; v1 submitted 8 March, 2019; originally announced March 2019.

Characterization of microdot apodizers for imaging exoplanets with next-generation space telescopes

Authors: Manxuan Zhang, Garreth Ruane, Jacques-Robert Delorme, Dimitri Mawet, Nemanja Jovanavic, Jeffrey Jewell, Stuart Shaklan, J. Kent Wallace

Abstract: A major science goal of future, large-aperture, optical space telescopes is to directly image and spectroscopically analyze reflected light from potentially habitable exoplanets. To accomplish this, the optical system must suppress diffracted light from the star to reveal point sources approximately ten orders of magnitude fainter than the host star at small angular separation. Coronagraphs with m… ▽ More A major science goal of future, large-aperture, optical space telescopes is to directly image and spectroscopically analyze reflected light from potentially habitable exoplanets. To accomplish this, the optical system must suppress diffracted light from the star to reveal point sources approximately ten orders of magnitude fainter than the host star at small angular separation. Coronagraphs with microdot apodizers achieve the theoretical performance needed to image Earth-like planets with a range of possible telescope designs, including those with obscured and segmented pupils. A test microdot apodizer with various bulk patterns (step functions, gradients, and sinusoids) and 4 different dot sizes (3, 5, 7, and 10 $μ$m) made of small chrome squares on anti-reflective glass was characterized with microscopy, optical laser interferometry, as well as transmission and reflectance measurements at wavelengths of 600 and 800 nm. Microscopy revealed the microdots were fabricated to high precision. Results from laser interferometry showed that the phase shifts observed in reflection vary with the local microdot fill factor. Transmission measurements showed that microdot fill factor and transmission were linearly related for dot sizes >5 $μ$m. However, anomalously high transmittance was measured when the dot size is <5x the wavelength and the fill factor is approximately 50%, where the microdot pattern becomes periodic. The transmission excess is not as prominent in the case of larger dot sizes suggesting that it is likely to be caused by the interaction between the incident field and electronic resonances in the surface of the metallic microdots. We used our empirical models of the microdot apodizers to optimize a second generation of reflective apodizer designs and confirmed that the amplitude and phase of the reflected beam closely matches the ideal wavefront. △ Less

Submitted 18 July, 2018; v1 submitted 17 July, 2018; originally announced July 2018.

Comments: Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave

Journal ref: Proc. SPIE 10698, 106985X (2018)

Study of Silicon Photomultiplier Performance in External Electric Fields

Authors: X. L. Sun, T. Tolba, G. F. Cao, P. Lv, L. J. Wen, A. Odian, F. Vachon, A. Alamre, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, L. Cao, W. R. Cen, C. Chambers, S. A. Charlebois , et al. (127 additional authors not shown)

Abstract: We report on the performance of silicon photomultiplier (SiPM) light sensors operating in electric field strength up to 30 kV/cm and at a temperature of 149K, relative to their performance in the absence of an external electric field. The SiPM devices used in this study show stable gain, photon detection efficiency, and rates of correlated pulses, when exposed to external fields, within the estima… ▽ More We report on the performance of silicon photomultiplier (SiPM) light sensors operating in electric field strength up to 30 kV/cm and at a temperature of 149K, relative to their performance in the absence of an external electric field. The SiPM devices used in this study show stable gain, photon detection efficiency, and rates of correlated pulses, when exposed to external fields, within the estimated uncertainties. No observable physical damage to the bulk or surface of the devices was caused by the exposure. △ Less

Submitted 9 July, 2018; originally announced July 2018.

Comments: 16 pages, 12 figures, 2 tables and two conferences (INPC2016 and TIPP2017)

Imaging individual barium atoms in solid xenon for barium tagging in nEXO

Authors: C. Chambers, T. Walton, D. Fairbank, A. Craycraft, D. R. Yahne, J. Todd, A. Iverson, W. Fairbank, A. Alamare, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen , et al. (126 additional authors not shown)

Abstract: The search for neutrinoless double beta decay probes the fundamental properties of neutrinos, including whether or not the neutrino and antineutrino are distinct. Double beta detectors are large and expensive, so background reduction is essential for extracting the highest sensitivity. The identification, or 'tagging', of the $^{136}$Ba daughter atom from double beta decay of $^{136}$Xe provides a… ▽ More The search for neutrinoless double beta decay probes the fundamental properties of neutrinos, including whether or not the neutrino and antineutrino are distinct. Double beta detectors are large and expensive, so background reduction is essential for extracting the highest sensitivity. The identification, or 'tagging', of the $^{136}$Ba daughter atom from double beta decay of $^{136}$Xe provides a technique for eliminating backgrounds in the nEXO neutrinoless double beta decay experiment. The tagging scheme studied in this work utilizes a cryogenic probe to trap the barium atom in solid xenon, where the barium atom is tagged via fluorescence imaging in the solid xenon matrix. Here we demonstrate imaging and counting of individual atoms of barium in solid xenon by scanning a focused laser across a solid xenon matrix deposited on a sapphire window. When the laser sits on an individual atom, the fluorescence persists for $\sim$30~s before drop** abruptly to the background level, a clear confirmation of one-atom imaging. No barium fluorescence persists following evaporation of a barium deposit to a limit of $\leq$0.16\%. This is the first time that single atoms have been imaged in solid noble element. It establishes the basic principle of a barium tagging technique for nEXO. △ Less

Submitted 12 December, 2018; v1 submitted 27 June, 2018; originally announced June 2018.

nEXO Pre-Conceptual Design Report

Authors: nEXO Collaboration, S. Al Kharusi, A. Alamre, J. B. Albert, M. Alfaris, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, T. Bhatta, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen, C. Chambers, S. A. Charlebois, M. Chiu, B. Cleveland, R. Conley , et al. (149 additional authors not shown)

Abstract: The projected performance and detector configuration of nEXO are described in this pre-Conceptual Design Report (pCDR). nEXO is a tonne-scale neutrinoless double beta ($0νββ$) decay search in $^{136}$Xe, based on the ultra-low background liquid xenon technology validated by EXO-200. With $\simeq$ 5000 kg of xenon enriched to 90% in the isotope 136, nEXO has a projected half-life sensitivity of app… ▽ More The projected performance and detector configuration of nEXO are described in this pre-Conceptual Design Report (pCDR). nEXO is a tonne-scale neutrinoless double beta ($0νββ$) decay search in $^{136}$Xe, based on the ultra-low background liquid xenon technology validated by EXO-200. With $\simeq$ 5000 kg of xenon enriched to 90% in the isotope 136, nEXO has a projected half-life sensitivity of approximately $10^{28}$ years. This represents an improvement in sensitivity of about two orders of magnitude with respect to current results. Based on the experience gained from EXO-200 and the effectiveness of xenon purification techniques, we expect the background to be dominated by external sources of radiation. The sensitivity increase is, therefore, entirely derived from the increase of active mass in a monolithic and homogeneous detector, along with some technical advances perfected in the course of a dedicated R&D program. Hence the risk which is inherent to the construction of a large, ultra-low background detector is reduced, as the intrinsic radioactive contamination requirements are generally not beyond those demonstrated with the present generation $0νββ$ decay experiments. Indeed, most of the required materials have been already assayed or reasonable estimates of their properties are at hand. The details described herein represent the base design of the detector configuration as of early 2018. Where potential design improvements are possible, alternatives are discussed. This design for nEXO presents a compelling path towards a next generation search for $0νββ$, with a substantial possibility to discover physics beyond the Standard Model. △ Less

Submitted 13 August, 2018; v1 submitted 28 May, 2018; originally announced May 2018.

Comments: 182 pages, minor revisions

Deep Neural Networks for Energy and Position Reconstruction in EXO-200

Authors: S. Delaquis, M. J. Jewell, I. Ostrovskiy, M. Weber, T. Ziegler, J. Dalmasson, L. J. Kaufman, T. Richards, J. B. Albert, G. Anton, I. Badhrees, P. S. Barbeau, R. Bayerlein, D. Beck, V. Belov, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, W. Cree, T. Daniels , et al. (69 additional authors not shown)

Abstract: We apply deep neural networks (DNN) to data from the EXO-200 experiment. In the studied cases, the DNN is able to reconstruct the relevant parameters - total energy and position - directly from raw digitized waveforms, with minimal exceptions. For the first time, the developed algorithms are evaluated on real detector calibration data. The accuracy of reconstruction either reaches or exceeds what… ▽ More We apply deep neural networks (DNN) to data from the EXO-200 experiment. In the studied cases, the DNN is able to reconstruct the relevant parameters - total energy and position - directly from raw digitized waveforms, with minimal exceptions. For the first time, the developed algorithms are evaluated on real detector calibration data. The accuracy of reconstruction either reaches or exceeds what was achieved by the conventional approaches developed by EXO-200 over the course of the experiment. Most existing DNN approaches to event reconstruction and classification in particle physics are trained on Monte Carlo simulated events. Such algorithms are inherently limited by the accuracy of the simulation. We describe a unique approach that, in an experiment such as EXO-200, allows to successfully perform certain reconstruction and analysis tasks by training the network on waveforms from experimental data, either reducing or eliminating the reliance on the Monte Carlo. △ Less

Submitted 30 August, 2018; v1 submitted 25 April, 2018; originally announced April 2018.

Comments: Accepted version. 33 pages, 28 figures

Journal ref: 2018 JINST 13 P08023

Segmented coronagraph design and analysis (SCDA): an initial design study of apodized vortex coronagraphs

Authors: Garreth Ruane, Jeffrey Jewell, Dimitri Mawet, Stuart Shaklan, Christopher C. Stark

Abstract: The segmented coronagraph design and analysis (SCDA) study is a coordinated effort, led by Stuart Shaklan (JPL) and supported by NASA's Exoplanet Exploration Program (ExEP), to provide efficient coronagraph design concepts for exoplanet imaging with future segmented aperture space telescopes. This document serves as an update on the apodized vortex coronagraph designs devised by the Caltech/JPL SC… ▽ More The segmented coronagraph design and analysis (SCDA) study is a coordinated effort, led by Stuart Shaklan (JPL) and supported by NASA's Exoplanet Exploration Program (ExEP), to provide efficient coronagraph design concepts for exoplanet imaging with future segmented aperture space telescopes. This document serves as an update on the apodized vortex coronagraph designs devised by the Caltech/JPL SCDA team. Apodized vortex coronagraphs come in two flavors, where the apodization is achieved either by use of 1) a gray-scale semi-transparent pupil mask or 2) a pair of deformable mirrors in series. Each approach has attractive benefits. This document presents a comprehensive review of the former type. Future theoretical investigations will further explore the use of deformable mirrors for apodization. △ Less

Submitted 6 December, 2017; originally announced December 2017.

Comments: White Paper (2016-2017)

Search for nucleon decays with EXO-200

Authors: J. B. Albert, G. Anton, I. Badhrees, P. S. Barbeau, R. Bayerlein, D. Beck, V. Belov, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, W. Cree, T. Daniels, M. Danilov, S. J. Daugherty, J. Daughhetee, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian, R. DeVoe, T. Didberidze , et al. (70 additional authors not shown)

Abstract: A search for instability of nucleons bound in $^{136}$Xe nuclei is reported with 223 kg$\cdot$yr exposure of $^{136}$Xe in the EXO-200 experiment. Lifetime limits of 3.3$\times 10^{23}$ and 1.9$\times 10^{23}$ yrs are established for nucleon decay to $^{133}$Sb and $^{133}$Te, respectively. These are the most stringent to date, exceeding the prior decay limits by a factor of 9 and 7, respectively. A search for instability of nucleons bound in $^{136}$Xe nuclei is reported with 223 kg$\cdot$yr exposure of $^{136}$Xe in the EXO-200 experiment. Lifetime limits of 3.3$\times 10^{23}$ and 1.9$\times 10^{23}$ yrs are established for nucleon decay to $^{133}$Sb and $^{133}$Te, respectively. These are the most stringent to date, exceeding the prior decay limits by a factor of 9 and 7, respectively. △ Less

Submitted 11 April, 2018; v1 submitted 20 October, 2017; originally announced October 2017.

Journal ref: Phys. Rev. D 97, 072007 (2018)

Sensitivity and discovery potential of the proposed nEXO experiment to neutrinoless double beta decay

Authors: nEXO Collaboration, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, F. Bourque, J. P. Brodsky, E. Brown, T. Brunner, A. Burenkov, G. F. Cao, L. Cao, W. R. Cen, C. Chambers, S. A. Charlebois, M. Chiu, B. Cleveland, M. Coon, M. Côté, A. Craycraft, W. Cree, J. Dalmasson , et al. (121 additional authors not shown)

Abstract: The next-generation Enriched Xenon Observatory (nEXO) is a proposed experiment to search for neutrinoless double beta ($0νββ$) decay in $^{136}$Xe with a target half-life sensitivity of approximately $10^{28}$ years using $5\times10^3$ kg of isotopically enriched liquid-xenon in a time projection chamber. This improvement of two orders of magnitude in sensitivity over current limits is obtained by… ▽ More The next-generation Enriched Xenon Observatory (nEXO) is a proposed experiment to search for neutrinoless double beta ($0νββ$) decay in $^{136}$Xe with a target half-life sensitivity of approximately $10^{28}$ years using $5\times10^3$ kg of isotopically enriched liquid-xenon in a time projection chamber. This improvement of two orders of magnitude in sensitivity over current limits is obtained by a significant increase of the $^{136}$Xe mass, the monolithic and homogeneous configuration of the active medium, and the multi-parameter measurements of the interactions enabled by the time projection chamber. The detector concept and anticipated performance are presented based upon demonstrated realizable background rates. △ Less

Submitted 19 October, 2018; v1 submitted 13 October, 2017; originally announced October 2017.

Comments: v2 as published

Report number: LLNL-JRNL-737682

Journal ref: Phys. Rev. C 97, 065503 (2018)

Trace radioactive impurities in final construction materials for EXO-200

Authors: D. S. Leonard, D. Auty, T. Didberidze, R. Gornea, P. Grinberg, R. MacLellan, B. Methven, A. Piepke, J. -L. Vuilleumier, J. B. Albert, G. Anton, I. Badhrees, P. S. Barbeau, R. Bayerlein, D. Beck, V. Belov, M. Breidenbach, T. Brunner, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, W. Cree , et al. (76 additional authors not shown)

Abstract: We report results from a systematic measurement campaign conducted to identify low radioactivity materials for the construction of the EXO-200 double beta decay experiment. Partial results from this campaign have already been reported in a 2008 paper by the EXO collaboration. Here we release the remaining data, collected since 2007, to the public. The data reported were obtained using a variety of… ▽ More We report results from a systematic measurement campaign conducted to identify low radioactivity materials for the construction of the EXO-200 double beta decay experiment. Partial results from this campaign have already been reported in a 2008 paper by the EXO collaboration. Here we release the remaining data, collected since 2007, to the public. The data reported were obtained using a variety of analytic techniques. The measurement sensitivities are among the best in the field. Construction of the EXO-200 detector has been concluded, and Phase-I data was taken from 2011 to 2014. The detector's extremely low background implicitly verifies the measurements and the analysis assumptions made during construction and reported in this paper. △ Less

Submitted 31 March, 2017; originally announced March 2017.

Comments: 28 pages, 5 figures

Measurement of the Drift Velocity and Transverse Diffusion of Electrons in Liquid Xenon with the EXO-200 Detector

Authors: EXO-200 Collaboration, :, J. B. Albert, P. S. Barbeau, D. Beck, V. Belov, M. Breidenbach, T. Brunner, A. Burenkov, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, M. Danilov, S. J. Daugherty, J. Daughhetee, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian, R. DeVoe, T. Didberidze, J. Dilling , et al. (63 additional authors not shown)

Abstract: The EXO-200 Collaboration is searching for neutrinoless double beta decay using a liquid xenon (LXe) time projection chamber. This measurement relies on modeling the transport of charge deposits produced by interactions in the LXe to allow discrimination between signal and background events. Here we present measurements of the transverse diffusion constant and drift velocity of electrons at drift… ▽ More The EXO-200 Collaboration is searching for neutrinoless double beta decay using a liquid xenon (LXe) time projection chamber. This measurement relies on modeling the transport of charge deposits produced by interactions in the LXe to allow discrimination between signal and background events. Here we present measurements of the transverse diffusion constant and drift velocity of electrons at drift fields between 20~V/cm and 615~V/cm using EXO-200 data. At the operating field of 380~V/cm EXO-200 measures a drift velocity of 1.705$_{-0.010}^{+0.014}$~mm/$μ$s and a transverse diffusion coefficient of 55$\pm$4~cm$^2$/s. △ Less

Submitted 22 March, 2017; v1 submitted 14 September, 2016; originally announced September 2016.

Comments: 9 pages, 7 figures, added minor clarifications recommended by the reviewer on E-field non-uniformities, minor edits to formatting of figures to conform with journal requirements

Apodized vortex coronagraph designs for segmented aperture telescopes

Authors: Garreth Ruane, Jeffrey Jewell, Dimitri Mawet, Laurent Pueyo, Stuart Shaklan

Abstract: Current state-of-the-art high contrast imaging instruments take advantage of a number of elegant coronagraph designs to suppress starlight and image nearby faint objects, such as exoplanets and circumstellar disks. The ideal performance and complexity of the optical systems depends strongly on the shape of the telescope aperture. Unfortunately, large primary mirrors tend to be segmented and have v… ▽ More Current state-of-the-art high contrast imaging instruments take advantage of a number of elegant coronagraph designs to suppress starlight and image nearby faint objects, such as exoplanets and circumstellar disks. The ideal performance and complexity of the optical systems depends strongly on the shape of the telescope aperture. Unfortunately, large primary mirrors tend to be segmented and have various obstructions, which limit the performance of most conventional coronagraph designs. We present a new family of vortex coronagraphs with numerically-optimized gray-scale apodizers that provide the sensitivity needed to directly image faint exoplanets with large, segmented aperture telescopes, including the Thirty Meter Telescope (TMT) as well as potential next-generation space telescopes. △ Less

Submitted 21 July, 2016; originally announced July 2016.

Comments: To appear in SPIE proceedings vol. 9912

Journal ref: Proc. SPIE 9912, 99122L (2016)

An Optimal Energy Estimator to Reduce Correlated Noise for the EXO-200 Light Readout

Authors: EXO-200 Collaboration, :, C. G. Davis, C. Hall, J. B. Albert, P. S. Barbeau, D. Beck, V. Belov, M. Breidenbach, T. Brunner, A. Burenkov, G. F. Cao, W. R. Cen, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, M. Danilov, S. J. Daugherty, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian, R. DeVoe, T. Didberidze , et al. (63 additional authors not shown)

Abstract: The energy resolution of the EXO-200 detector is limited by electronics noise in the measurement of the scintillation response. Here we present a new technique to extract optimal scintillation energy measurements for signals split across multiple channels in the presence of correlated noise. The implementation of these techniques improves the energy resolution of the detector at the neutrinoless d… ▽ More The energy resolution of the EXO-200 detector is limited by electronics noise in the measurement of the scintillation response. Here we present a new technique to extract optimal scintillation energy measurements for signals split across multiple channels in the presence of correlated noise. The implementation of these techniques improves the energy resolution of the detector at the neutrinoless double beta decay Q-value from $\left[1.9641\pm 0.0039\right]\%$ to $\left[1.5820\pm 0.0044\right]\%$. △ Less

Submitted 22 March, 2017; v1 submitted 20 May, 2016; originally announced May 2016.

Comments: 21 pages, 8 figures, 1 table

Journal ref: JINST 11 P07015 (2016)

Cosmogenic Backgrounds to 0νββ in EXO-200

Authors: EXO-200 Collaboration, :, J. B. Albert, D. J. Auty, P. S. Barbeau, D. Beck, V. Belov, M. Breidenbach, T. Brunner, A. Burenkov, G. F. Cao, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, M. Danilov, S. J. Daugherty, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian, R. DeVoe, T. Didberidze, J. Dilling, A. Dolgolenko , et al. (63 additional authors not shown)

Abstract: As neutrinoless double-beta decay experiments become more sensitive and intrinsic radioactivity in detector materials is reduced, previously minor contributions to the background must be understood and eliminated. With this in mind, cosmogenic backgrounds have been studied with the EXO-200 experiment. Using the EXO-200 TPC, the muon flux (through a flat horizontal surface) underground at the Waste… ▽ More As neutrinoless double-beta decay experiments become more sensitive and intrinsic radioactivity in detector materials is reduced, previously minor contributions to the background must be understood and eliminated. With this in mind, cosmogenic backgrounds have been studied with the EXO-200 experiment. Using the EXO-200 TPC, the muon flux (through a flat horizontal surface) underground at the Waste Isolation Pilot Plant (WIPP) has been measured to be Φ = 4.07 $\pm$ 0.14 (sys) $\pm$ 0.03 (stat) $\times$ $10^{-7}$cm$^{-2}$ s$^{-1}$, with a vertical intensity of $I_{v}$ = 2.97$^{+0.14}_{-0.13}$ (sys) $\pm$ 0.02 (stat) $\times$ $10^{-7}$cm$^{-2}$ s$^{-1}$ sr$^{-1}$. Simulations of muon-induced backgrounds identified several potential cosmogenic radionuclides, though only 137Xe is a significant background for the 136Xe 0νββ search with EXO-200. Muon-induced neutron backgrounds were measured using γ-rays from neutron capture on the detector materials. This provided a measurement of 137Xe yield, and a test of the accuracy of the neutron production and transport simulations. The independently measured rates of 136Xe neutron capture and of 137Xe decay agree within uncertainties. Geant4 and FLUKA simulations were performed to estimate neutron capture rates, and these estimates agreed to within ~40% or better with measurements. The ability to identify 136Xe(n,γ) events will allow for rejection of 137Xe backgrounds in future 0νββ analyses. △ Less

Submitted 16 April, 2016; v1 submitted 21 December, 2015; originally announced December 2015.

Comments: Published in JCAP, 29 pages, 13 figures

Measurements of the ion fraction and mobility of alpha and beta decay products in liquid xenon using EXO-200

Authors: J. B. Albert, D. J. Auty, P. S. Barbeau, D. Beck, V. Belov, M. Breidenbach, T. Brunner, A. Burenkov, G. F. Cao, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, M. Danilov, S. J. Daugherty, C. G. Davis, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian, R. DeVoe, T. Didberidze, A. Dolgolenko, M. J. Dolinski, M. Dunford , et al. (60 additional authors not shown)

Abstract: Alpha decays in the EXO-200 detector are used to measure the fraction of charged $^{218}\mathrm{Po}$ and $^{214}\mathrm{Bi}$ daughters created from alpha and beta decays, respectively. $^{222}\mathrm{Rn}$ alpha decays in liquid xenon (LXe) are found to produce $^{218}\mathrm{Po}^{+}$ ions $50.3 \pm 3.0\%$ of the time, while the remainder of the $^{218}\mathrm{Po}$ atoms are neutral. The fraction o… ▽ More Alpha decays in the EXO-200 detector are used to measure the fraction of charged $^{218}\mathrm{Po}$ and $^{214}\mathrm{Bi}$ daughters created from alpha and beta decays, respectively. $^{222}\mathrm{Rn}$ alpha decays in liquid xenon (LXe) are found to produce $^{218}\mathrm{Po}^{+}$ ions $50.3 \pm 3.0\%$ of the time, while the remainder of the $^{218}\mathrm{Po}$ atoms are neutral. The fraction of $^{214}\mathrm{Bi}^{+}$ from $^{214}\mathrm{Pb}$ beta decays in LXe is found to be $76.4 \pm 5.7\%$, inferred from the relative rates of $^{218}\mathrm{Po}$ and $^{214}\mathrm{Po}$ alpha decays in the LXe. The average velocity of $^{218}\mathrm{Po}$ ions is observed to decrease for longer drift times. Initially the ions have a mobility of $0.390 \pm 0.006~\mathrm{cm}^2/(\mathrm{kV}~\mathrm{s})$, and at long drift times the mobility is $0.219 \pm 0.004~\mathrm{cm}^2/(\mathrm{kV}~\mathrm{s})$. Time constants associated with the change in mobility during drift of the $^{218}\mathrm{Po}^{+}$ ions are found to be proportional to the electron lifetime in the LXe. △ Less

Submitted 3 April, 2017; v1 submitted 31 May, 2015; originally announced June 2015.

Journal ref: Phys. Rev. C 92, 045504 (2015)

Investigation of radioactivity-induced backgrounds in EXO-200

Authors: J. B. Albert, D. J. Auty, P. S. Barbeau, D. Beck, V. Belov, C. Benitez-Medina, M. Breidenbach, T. Brunner, A. Burenkov, G. F. Cao, C. Chambers, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, M. Danilov, S. J. Daugherty, C. G. Davis, J. Davis, S. Delaquis, A. Der Mesrobian-Kabakian, R. DeVoe, T. Didberidze, A. Dolgolenko, M. J. Dolinski , et al. (61 additional authors not shown)

Abstract: The search for neutrinoless double-beta decay (0νββ) requires extremely low background and a good understanding of their sources and their influence on the rate in the region of parameter space relevant to the 0νββ signal. We report on studies of various β- and γ-backgrounds in the liquid- xenon-based EXO-200 0νββ experiment. With this work we try to better understand the location and strength of… ▽ More The search for neutrinoless double-beta decay (0νββ) requires extremely low background and a good understanding of their sources and their influence on the rate in the region of parameter space relevant to the 0νββ signal. We report on studies of various β- and γ-backgrounds in the liquid- xenon-based EXO-200 0νββ experiment. With this work we try to better understand the location and strength of specific background sources and compare the conclusions to radioassay results taken before and during detector construction. Finally, we discuss the implications of these studies for EXO-200 as well as for the next-generation, tonne-scale nEXO detector. △ Less

Submitted 16 July, 2015; v1 submitted 20 March, 2015; originally announced March 2015.

Comments: 9 pages, 7 figures, 3 tables

Journal ref: Phys. Rev. C 92 015503 (2015)

Search for Majoron-emitting modes of double-beta decay of $^{136}$Xe with EXO-200

Authors: EXO-200 Collaboration, :, J. B. Albert, D. J. Auty, P. S. Barbeau, E. Beauchamp, D. Beck, V. Belov, C. Benitez-Medina, M. Breidenbach, T. Brunner, A. Burenkov, G. F. Cao, C. Chambers, J. Chaves, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, M. Danilov, S. J. Daugherty, C. G. Davis, J. Davis, R. DeVoe, S. Delaquis , et al. (68 additional authors not shown)

Abstract: EXO-200 is a single phase liquid xenon detector designed to search for neutrinoless double-beta decay of $^{136}$Xe. Here we report on a search for various Majoron-emitting modes based on 100 kg$\cdot$yr exposure of $^{136}$Xe. A lower limit of $T^{^{136}Xe}_{1/2} >1.2 \cdot 10^{24}$ yr at 90% C.L. on the half-life of the spectral index = 1 Majoron decay was obtained, corresponding to a constraint… ▽ More EXO-200 is a single phase liquid xenon detector designed to search for neutrinoless double-beta decay of $^{136}$Xe. Here we report on a search for various Majoron-emitting modes based on 100 kg$\cdot$yr exposure of $^{136}$Xe. A lower limit of $T^{^{136}Xe}_{1/2} >1.2 \cdot 10^{24}$ yr at 90% C.L. on the half-life of the spectral index = 1 Majoron decay was obtained, corresponding to a constraint on the Majoron-neutrino coupling constant of $|< g^{M}_{ee} >|<$ (0.8-1.7)$\cdot$10$^{-5}$. △ Less

Submitted 18 November, 2014; v1 submitted 24 September, 2014; originally announced September 2014.

Comments: Published in PRD. Version 2: Referee comments addressed, journal reference added

Journal ref: Phys. Rev. D 90, 092004 (2014)

Search for Majorana neutrinos with the first two years of EXO-200 data

Authors: EXO-200 Collaboration, :, J. B. Albert, D. J. Auty, P. S. Barbeau, E. Beauchamp, D. Beck, V. Belov, C. Benitez-Medina, J. Bonatt, M. Breidenbach, T. Brunner, A. Burenkov, G. F. Cao, C. Chambers, J. Chaves, B. Cleveland, M. Coon, A. Craycraft, T. Daniels, M. Danilov, S. J. Daugherty, C. G. Davis, J. Davis, R. DeVoe , et al. (70 additional authors not shown)

Abstract: Many extensions of the Standard Model of particle physics suggest that neutrinos should be Majorana-type fermions, but this assumption is difficult to confirm. Observation of neutrinoless double-beta decay ($0νββ$), a spontaneous transition that may occur in several candidate nuclei, would verify the Majorana nature of the neutrino and constrain the absolute scale of the neutrino mass spectrum. Re… ▽ More Many extensions of the Standard Model of particle physics suggest that neutrinos should be Majorana-type fermions, but this assumption is difficult to confirm. Observation of neutrinoless double-beta decay ($0νββ$), a spontaneous transition that may occur in several candidate nuclei, would verify the Majorana nature of the neutrino and constrain the absolute scale of the neutrino mass spectrum. Recent searches carried out with $^{76}$Ge (GERDA experiment) and $^{136}$Xe (KamLAND-Zen and EXO-200 experiments) have established the lifetime of this decay to be longer than $10^{25}$ yr, corresponding to a limit on the neutrino mass of 0.2-0.4 eV. Here we report new results from EXO-200 based on 100 kg$\cdot$yr of $^{136}$Xe exposure, representing an almost fourfold increase from our earlier published datasets. We have improved the detector resolution at the $^{136}$Xe double-beta-decay Q-value to $σ$/E = 1.53% and revised the data analysis. The obtained half-life sensitivity is $1.9\cdot10^{25}$ yr, an improvement by a factor of 2.7 compared to previous EXO-200 results. We find no statistically significant evidence for $0νββ$ decay and set a half-life limit of $1.1\cdot10^{25}$ yr at 90% CL. The high sensitivity holds promise for further running of the EXO-200 detector and future $0νββ$ decay searches with nEXO. △ Less

Submitted 4 June, 2014; v1 submitted 27 February, 2014; originally announced February 2014.

Comments: 9 pages, 6 figures

Journal ref: Nature 510, 229-234 (12 June 2014)

Fluid Mechanics of Everyday Objects

Authors: N. J. Parziale, J. S. Jewell, B. E. Schmidt, J. Rabinovitch, R. Dunne

Abstract: High speed Schlieren videos were produced highlighting the fluid mechanics found in everyday objects. This video (entry 102369) was submitted as part of the Gallery of Fluid Motion 2013, which is a showcase of fluid dynamics videos. High speed Schlieren videos were produced highlighting the fluid mechanics found in everyday objects. This video (entry 102369) was submitted as part of the Gallery of Fluid Motion 2013, which is a showcase of fluid dynamics videos. △ Less

Submitted 9 October, 2013; originally announced October 2013.

Comments: Both a high-resolution version and a low-resolution version of the submitted video are available for download

A multi-level solver for Gaussian constrained CMB realizations

Authors: D. S. Seljebotn, K. -A. Mardal, J. B. Jewell, H. K. Eriksen, P. Bull

Abstract: We present a multi-level solver for drawing constrained Gaussian realizations or finding the maximum likelihood estimate of the CMB sky, given noisy sky maps with partial sky coverage. The method converges substantially faster than existing Conjugate Gradient (CG) methods for the same problem. For instance, for the 143 GHz Planck frequency channel, only 3 multi-level W-cycles result in an absolute… ▽ More We present a multi-level solver for drawing constrained Gaussian realizations or finding the maximum likelihood estimate of the CMB sky, given noisy sky maps with partial sky coverage. The method converges substantially faster than existing Conjugate Gradient (CG) methods for the same problem. For instance, for the 143 GHz Planck frequency channel, only 3 multi-level W-cycles result in an absolute error smaller than 1 microKelvin in any pixel. Using 16 CPU cores, this translates to a computational expense of 6 minutes wall time per realization, plus 8 minutes wall time for a power spectrum-dependent precomputation. Each additional W-cycle reduces the error by more than an order of magnitude, at an additional computational cost of 2 minutes. For comparison, we have never been able to achieve similar absolute convergence with conventional CG methods for this high signal-to-noise data set, even after thousands of CG iterations and employing expensive preconditioners. The solver is part of the Commander 2 code, which is available with an open source license at http://commander.bitbucket.org/. △ Less

Submitted 24 February, 2014; v1 submitted 24 August, 2013; originally announced August 2013.

Comments: Updated to match published version (no major changes)

Journal ref: ApJS 210, 24 (2014)

Gas Bubbles Emerging from a Submerged Granular Bed

Authors: John A. Meier, Joseph S. Jewell, Christopher E. Brennen

Abstract: This fluid dynamics video was submitted to the Gallery of Fluid Motion for the 2009 APS Division of Fluid Dynamics Meeting in Minneapolis, Minnesota. In this video we show some results from a simple experiment where air was injected by a single nozzle at known constant flow rates in the bottom of a granular bed submerged in water. The injected air propagates through the granular bed in one of tw… ▽ More This fluid dynamics video was submitted to the Gallery of Fluid Motion for the 2009 APS Division of Fluid Dynamics Meeting in Minneapolis, Minnesota. In this video we show some results from a simple experiment where air was injected by a single nozzle at known constant flow rates in the bottom of a granular bed submerged in water. The injected air propagates through the granular bed in one of two modes. Mode 1 emergence involves small discrete bubbles taking tortuous paths through the interstitial space of the bed. Multiple small bubbles can be emitted from the bed in an array of locations at the same time during Mode 1 emergence. Mode 2 emergence involves large discrete bubbles locally fluidizing the granular bed and exiting the bed approximately above the injection site. Bead diameter, bead density, and air flow rate were varied to investigate the change in bubble release behavior at the top of the granular bed. This system is a useful model for methane seeps in lakes. Methane bubbles are released from the decomposition of organic matter in the lake bed. The initial size of the bubble determines how much of the gas is absorbed into the lake and how much of the gas reaches the surface and is released into the atmosphere. The size and behavior of the emerging bubbles may also affect the amount of vertical mixing occurring in the lake, as well as the mixing from the lake bed into the benthic layer. △ Less

Submitted 16 October, 2009; originally announced October 2009.

Comments: 2009 APS DFD Gallery of Fluid Motion Submission

A Markov Chain Monte Carlo Algorithm for analysis of low signal-to-noise CMB data

Authors: J. B. Jewell, H. K. Eriksen, B. D. Wandelt, I. J. O'Dwyer, G. Huey, K. M. Gorski

Abstract: We present a new Monte Carlo Markov Chain algorithm for CMB analysis in the low signal-to-noise regime. This method builds on and complements the previously described CMB Gibbs sampler, and effectively solves the low signal-to-noise inefficiency problem of the direct Gibbs sampler. The new algorithm is a simple Metropolis-Hastings sampler with a general proposal rule for the power spectrum, C_l,… ▽ More We present a new Monte Carlo Markov Chain algorithm for CMB analysis in the low signal-to-noise regime. This method builds on and complements the previously described CMB Gibbs sampler, and effectively solves the low signal-to-noise inefficiency problem of the direct Gibbs sampler. The new algorithm is a simple Metropolis-Hastings sampler with a general proposal rule for the power spectrum, C_l, followed by a particular deterministic rescaling operation of the sky signal. The acceptance probability for this joint move depends on the sky map only through the difference of chi-squared between the original and proposed sky sample, which is close to unity in the low signal-to-noise regime. The algorithm is completed by alternating this move with a standard Gibbs move. Together, these two proposals constitute a computationally efficient algorithm for map** out the full joint CMB posterior, both in the high and low signal-to-noise regimes. △ Less

Submitted 3 July, 2008; originally announced July 2008.

Comments: Submitted to ApJ

Journal ref: Astrophys.J.697:258-268,2009