-
Design, construction, and operation of a 1-ton Water-based Liquid scintillator detector at Brookhaven National Laboratory
Authors:
X. Xiang,
G. Yang,
S. Andrade,
M. Askins,
D. M. Asner,
A. Baldoni,
D. Cowen,
M. V. Diwan,
S. Gokhale,
S. Hans,
J. Jerome,
G. Lawley,
S. Linden,
G. D. Orebi Gann,
C. Reyes,
R. Rosero,
N. Seberg,
M. Smiley,
N. Speece-Moyer,
B. Walsh,
J. J. Wang,
M. Wilking,
M. Yeh
Abstract:
Water-based liquid scintillators (WbLS) are attractive neutrino detector materials because they allow us to tune the ratio of the Cherenkov and scintillation signals. Using WbLS large-scale neutrino experiments can benefit from both directional reconstruction and enhanced low-energy efficiency. Furthermore, broadening the science capability of such materials by metal do** may be better suited fo…
▽ More
Water-based liquid scintillators (WbLS) are attractive neutrino detector materials because they allow us to tune the ratio of the Cherenkov and scintillation signals. Using WbLS large-scale neutrino experiments can benefit from both directional reconstruction and enhanced low-energy efficiency. Furthermore, broadening the science capability of such materials by metal do** may be better suited for water based liquid scintillators. We recently constructed and commissioned a 1-ton WbLS detector with good photosensor coverage and a capable data acquisition system. We intend to use this flexible detector system as a testbed for WbLS R&D. In this paper we give an overview of the 1-ton system and provide some early analysis results.
△ Less
Submitted 13 June, 2024; v1 submitted 19 March, 2024;
originally announced March 2024.
-
Liquid inertia versus bubble cloud buoyancy in circular plunging jet experiments
Authors:
Narendra Dev,
{J. John Soundar Jerome},
Hélène Scolan,
Jean-Philippe Matas
Abstract:
When a liquid jet plunges into a pool, it can generate a bubble-laden jet flow underneath the surface. This common and simple phenomenon is investigated experimentally for circular jets to illustrate and quantify the role played by the net gas/liquid void fraction on the maximum bubble penetration depth. It is first shown that an increase in either the impact diameter or the jet fall height to dia…
▽ More
When a liquid jet plunges into a pool, it can generate a bubble-laden jet flow underneath the surface. This common and simple phenomenon is investigated experimentally for circular jets to illustrate and quantify the role played by the net gas/liquid void fraction on the maximum bubble penetration depth. It is first shown that an increase in either the impact diameter or the jet fall height to diameter ratio at constant impact momentum leads to a reduction in the bubble cloud size. By systematically measuring the local void fraction using optical probes in the biphasic jet, it is then demonstrated that this effect is a direct consequence of the increase in the air content within the cloud. A simple momentum balance model, including only inertia and the buoyancy force, is shown to predict the bubble cloud depth without any fitting parameters. Finally, a Froude number based on the bubble terminal velocity, the cloud depth, and also the net void fraction is introduced to propose a simple criterion for the threshold between the inertia-dominated and buoyancy-dominated regimes.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Reconfiguration and oscillations of a vertical, cantilevered-sheet subject to vortex-shedding
Authors:
J. John Soundar Jerome,
Yohann Bachelier,
Delphine Doppler,
Christophe Lehmann,
Nicolas Rivière
Abstract:
The dynamics of a thin low-density polyethylene sheet subject to periodic forcing due to Bénard-Kàrmàn vortices in a long narrow water channel is investigated here. In particular, the time-averaged sheet deflection and its oscillation amplitude are considered. The former is first illustrated to be well-approximated by the static equilibrium between the buoyancy force, the elastic restoring force,…
▽ More
The dynamics of a thin low-density polyethylene sheet subject to periodic forcing due to Bénard-Kàrmàn vortices in a long narrow water channel is investigated here. In particular, the time-averaged sheet deflection and its oscillation amplitude are considered. The former is first illustrated to be well-approximated by the static equilibrium between the buoyancy force, the elastic restoring force, and the profile drag based on the depth-averaged water speed. Our observations also indicate that the presence of upstream vortices hinder the overall reconfiguration effect, well-known in an otherwise steady flow. For the sheet tip oscillations, a simple model based on torsional-spring-mounted flat plate correctly captures the measured tip amplitude over a wide range of sheet physical properties and flow conditions. Furthermore, a rich phenomenology of structural dynamics including vortex-forced-vibration, lock-in with the sheet natural frequency, flow-induced vibration due to the sheet wake, multiple-frequency and modal response is reported.
△ Less
Submitted 30 July, 2023; v1 submitted 9 October, 2022;
originally announced October 2022.
-
Bubble rise in a Hele-Shaw cell: bridging the gap between viscous and inertial regimes
Authors:
Benjamin Monnet,
Christopher Madec,
Valérie Vidal,
Sylvain Joubaud,
J. John Soundar Jerome
Abstract:
The rise of a single bubble confined between two vertical plates is investigated over a wide range of Reynolds numbers. In particular, we focus on the evolution of the bubble speed, aspect ratio and drag coefficient during the transition from the viscous to the inertial regime. For sufficiently large bubbles, a simple model based on power balance captures the transition for the bubble velocity and…
▽ More
The rise of a single bubble confined between two vertical plates is investigated over a wide range of Reynolds numbers. In particular, we focus on the evolution of the bubble speed, aspect ratio and drag coefficient during the transition from the viscous to the inertial regime. For sufficiently large bubbles, a simple model based on power balance captures the transition for the bubble velocity and matches all the experimental data despite strong time variations of bubble aspect ratio at large Reynolds numbers. Surprisingly, bubbles in the viscous regime systematically exhibit an ellipse elongated along its direction of motion while bubbles in the inertia-dominated regime are always flattened perpendicularly to it.
△ Less
Submitted 7 May, 2022;
originally announced May 2022.
-
Puzzling bubble rise speed increase in dense granular suspensions
Authors:
Christopher Madec,
Brivaël Collin,
J. John Soundar Jerome,
Sylvain Joubaud
Abstract:
We present an anomalous experimental observation on the rising speed of air bubbles in a Hele-Shaw cell containing a suspension of spherical, neutrally-buoyant, non-Brownian particles. Strikingly, bubbles rise faster in suspensions as compared to particle-less liquids of the same effective viscosity. By carefully measuring this bubble speed increase at various particle volume fraction and via velo…
▽ More
We present an anomalous experimental observation on the rising speed of air bubbles in a Hele-Shaw cell containing a suspension of spherical, neutrally-buoyant, non-Brownian particles. Strikingly, bubbles rise faster in suspensions as compared to particle-less liquids of the same effective viscosity. By carefully measuring this bubble speed increase at various particle volume fraction and via velocity field imaging, we demonstrate that this strange bubble dynamics is linked to a reduction in the bulk dissipation rate. A good match between our experimental data and computations based on Suspension Balance Model illustrates that the underlying mechanism for this dissipation-rate-deficit is related to a non-uniform particle distribution in the direction perpendicular to the channel walls due to shear-induced particle migration.
△ Less
Submitted 7 September, 2020; v1 submitted 17 July, 2020;
originally announced July 2020.
-
Inertial drag-out problem : sheets and films on a rotating disc
Authors:
J. John Soundar Jerome,
Sébastien Thevenin,
Mickaël Bourgoin,
Jean-Philippe Matas
Abstract:
The so-called Landau-Levich-Deryaguin problem treats the coating flow dynamics of a thin viscous liquid film entrained by a moving solid surface. In this context, we use a simple experimental set-up consisting of a partially-immersed rotating disc in a liquid tank to study the role of inertia, and also curvature, on liquid entrainment. Using water and UCON$^{\mbox{TM}}$ mixtures, we point out a ri…
▽ More
The so-called Landau-Levich-Deryaguin problem treats the coating flow dynamics of a thin viscous liquid film entrained by a moving solid surface. In this context, we use a simple experimental set-up consisting of a partially-immersed rotating disc in a liquid tank to study the role of inertia, and also curvature, on liquid entrainment. Using water and UCON$^{\mbox{TM}}$ mixtures, we point out a rich phenomenology in the presence of strong inertia : ejection of multiple liquid sheets on the emerging side of the disc, sheet fragmentation, ligament formation and atomization of the liquid flux entrained over the disc's rim. We focus our study on a single liquid sheet and the related average liquid flow rate entrained over a thin disc for various depth-to-radius ratio $h/R < 1$. We show that the liquid sheet is created via a ballistic mechanism as liquid is lifted out of the pool by the rotating disc. We then show that the flow rate in the entrained liquid film is controlled by both viscous and surface tension forces as in the classical Landau-Levich-Deryaguin problem despite the three dimensional, non-uniform and unsteady nature of the flow, and also despite the large values of the film thickness based flow Reynolds number. When the characteristic Froude and Weber numbers become significant, strong inertial effects influence the entrained liquid flux over the disc at large radius-to-immersion-depth ratio, namely via entrainment by the disc's lateral walls and via a contribution to the flow rate extracted from the 3D liquid sheet itself, respectively.
△ Less
Submitted 13 October, 2020; v1 submitted 9 March, 2020;
originally announced March 2020.
-
A note on Stokes' problem in dense granular media using the $μ(I)$--rheology
Authors:
J. John Soundar Jerome,
Bastien Di Pierro
Abstract:
The classical Stokes' problem describing the fluid motion due to a steadily moving infinite wall is revisited in the context of dense granular flows of mono-dispersed beads using the recently proposed $μ(I)$--rheology. In Newtonian fluids, molecular diffusion brings about a self-similar velocity profile and the boundary layer in which the fluid motion takes place increases indefinitely with time…
▽ More
The classical Stokes' problem describing the fluid motion due to a steadily moving infinite wall is revisited in the context of dense granular flows of mono-dispersed beads using the recently proposed $μ(I)$--rheology. In Newtonian fluids, molecular diffusion brings about a self-similar velocity profile and the boundary layer in which the fluid motion takes place increases indefinitely with time $t$ as $\sqrt{νt}$, where $ν$ is the kinematic viscosity. For a dense granular visco-plastic liquid, it is shown that the local shear stress, when properly rescaled, exhibits self-similar behaviour at short-time scales and it then rapidly evolves towards a steady-state solution. The resulting shear layer increases in thickness as $\sqrt{ν_g t}$ analogous to a Newtonian fluid where $ν_g$ is an equivalent granular kinematic viscosity depending not only on the intrinsic properties of the granular media such as grain diameter $d$, density $ρ$ and friction coefficients but also on the applied pressure $p_w$ at the moving wall and the solid fraction $φ$ (constant). In addition, the $μ(I)$--rheology indicates that this growth continues until reaching the steady-state boundary layer thickness $δ_s = β_w (p_w/φρg )$, independent of the grain size, at about a finite time proportional to $β_w^2 (p_w/ρg d)^{3/2} \sqrt{d/g}$, where $g$ is the acceleration due to gravity and $β_w = (τ_w - τ_s)/τ_s$ is the relative surplus of the steady-state wall shear-stress $τ_w$ over the critical wall shear stress $τ_s$ (yield stress) that is needed to bring the granular media into motion... (see article for a complete abstract).
△ Less
Submitted 14 May, 2018; v1 submitted 26 March, 2018;
originally announced March 2018.
-
Transient growth in Rayleigh-Bénard-Poiseuille/Couette convection
Authors:
J. John Soundar Jerome,
Jean-Marc Chomaz,
Patrick Huerre
Abstract:
An investigation of the effect of a destabilizing cross-stream temperature gradient on the transient growth phenomenon of plane Poiseuille flow and plane Couette flow is presented. Only the streamwise-uniform and nearly streamwise-uniform disturbances are highly influenced by the Rayleigh number Ra and Prandtl number Pr. The maximum optimal transient growth G max of streamwise-uniform disturbances…
▽ More
An investigation of the effect of a destabilizing cross-stream temperature gradient on the transient growth phenomenon of plane Poiseuille flow and plane Couette flow is presented. Only the streamwise-uniform and nearly streamwise-uniform disturbances are highly influenced by the Rayleigh number Ra and Prandtl number Pr. The maximum optimal transient growth G max of streamwise-uniform disturbances increases slowly with increasing Ra and decreasing Pr. For all Ra and Pr, at moderately large Reynolds numbersRe, the supremum of G max is always attained for streamwise-uniform perturbations (or nearly streamwise-uniform perturbations, in the case of plane Couette flow) which produce large streamwise streaks and Rayleigh-Bénard convection rolls (RB). The optimal growth curves retain the same large-Reynolds-number scaling as in pure shear flow. A 3D vector model of the governing equations demonstrates that the short-time behavior is governed by the classical lift-up mechanism and that the influence of Ra on this mechanism is secondary and negligible. The optimal input for the largest long-time response is given by the adjoint of the dominant eigenmode with respect to the energy scalar product: the RBeigenmode without its streamwise velocity component. These short-time and long-time responses depict, to leading order, the optimal transient growth G(t). At moderately large Ra (or small Pr at a fixed Ra), the dominant adjoint mode is a good approximation to the optimal initial condition for all time. Over a general class of norms that can be considered as growth functions, the results remain qualitatively similar, for example, the dominant adjoint eigenmode still approximates the maximum optimal response.
△ Less
Submitted 27 January, 2016;
originally announced January 2016.
-
Vortices catapult droplets in atomization
Authors:
J John Soundar Jerome,
Sylvain Marty,
Jean-Philippe Matas,
Stéphane Zaleski,
Jérôme Hoepffner
Abstract:
A droplet ejection mechanism in planar two-phase mixing layers is examined. Any disturbance on the gas-liquid interface grows into a Kelvin-Helmholtz wave, and the wave crest forms a thin liquid film that flaps as the wave grows downstream. Increasing the gas speed, it is observed that the film breaks up into droplets which are eventually thrown into the gas stream at large angles. In a flow where…
▽ More
A droplet ejection mechanism in planar two-phase mixing layers is examined. Any disturbance on the gas-liquid interface grows into a Kelvin-Helmholtz wave, and the wave crest forms a thin liquid film that flaps as the wave grows downstream. Increasing the gas speed, it is observed that the film breaks up into droplets which are eventually thrown into the gas stream at large angles. In a flow where most of the momentum is in the horizontal direction, it is surprising to observe these large ejection angles. Our experiments and simulations show that a recirculation region grows downstream of the wave and leads to vortex shedding similar to the wake of a backward-facing step. The ejection mechanism results from the interaction between the liquid film and the vortex shedding sequence: a recirculation zone appears in the wake of the wave and a liquid film emerges from the wave crest; the recirculation region detaches into a vortex and the gas flow over the wave momentarily reattaches due to the departure of the vortex; this reattached flow pushes the liquid film down; by now, a new recirculation vortex is being created in the wake of the wave - just where the liquid film is now located; the liquid film is blown up from below by the newly formed recirculation vortex in a manner similar to a bag-breakup event; the resulting droplets are catapulted by the recirculation vortex.
△ Less
Submitted 27 January, 2016;
originally announced January 2016.
-
Extended Squire's transformation and its consequences for transient growth in a confined shear flow
Authors:
J John Soundar Jerome,
Jean-Marc Chomaz
Abstract:
The classical Squire transformation is extended to the entire eigenfunction structure of both Orr-Sommerfeld and Squire modes. For arbitrary Reynolds numbers Re, this transformation allows the solution of the initial-value problem for an arbitrary three-dimensional (3D) disturbance via a two-dimensional (2D) initial-value problem at a smaller Reynolds number Re2D. Its implications for the transien…
▽ More
The classical Squire transformation is extended to the entire eigenfunction structure of both Orr-Sommerfeld and Squire modes. For arbitrary Reynolds numbers Re, this transformation allows the solution of the initial-value problem for an arbitrary three-dimensional (3D) disturbance via a two-dimensional (2D) initial-value problem at a smaller Reynolds number Re2D. Its implications for the transient growth of arbitrary 3D disturbances is studied. Using the Squire transformation, the general solution of the initial-value problem is shown to predict large-Reynolds-number scaling for the optimal gain at all optimization times t with t/Re finite or large. This result is an extension of the well-known scaling laws first obtained by Gustavsson (J. Fluid Mech., vol. 224, 1991, pp. 241-260) and Reddy & Henningson (J. Fluid Mech., vol. 252, 1993, pp. 209-238) for arbitrary αRe, where αis the streamwise wavenumber. The Squire transformation is also extended to the adjoint problem and, hence, the adjoint Orr-Sommerfeld and Squire modes. It is, thus, demonstrated that the long-time optimal growth of 3D perturbations as given by the exponential growth (or decay) of the leading eigenmode times an extra gain representing its receptivity, may be decomposed as a product of the gains arising from purely 2D mechanisms and an analytical contribution representing 3D growth mechanisms equal to 1+(βRe/Re2D)2G, where βis the spanwise wavenumber and G is a known expression. For example, when the leading eigenmode is an Orr-Sommerfeld mode, it is given by the product of respective gains from the 2D Orr mechanism and an analytical expression representing the 3D lift-up mechanism. Whereas if the leading eigenmode is a Squire mode, the extra gain is shown to be solely due to the 3D lift-up mechanism.
△ Less
Submitted 27 January, 2016;
originally announced January 2016.
-
Discretization of Time-Dependent Quantum Systems: Real-Time Propagation of The Evolution Operator
Authors:
Joseph W. Jerome,
Eric Polizzi
Abstract:
We discuss time dependent quantum systems on bounded domains. Our work may be viewed as a framework for several models, including linear iterations involved in time dependent density functional theory (TDDFT), the Hartree-Fock model, or other quantum models. A key aspect of the analysis of the algorithms is the use of time-ordered evolution operators, which allow for both a well-posed problem and…
▽ More
We discuss time dependent quantum systems on bounded domains. Our work may be viewed as a framework for several models, including linear iterations involved in time dependent density functional theory (TDDFT), the Hartree-Fock model, or other quantum models. A key aspect of the analysis of the algorithms is the use of time-ordered evolution operators, which allow for both a well-posed problem and its approximation. The approximation theorems obtained for the time-ordered evolution operators complement those in the current literature. We discuss the available theory at the outset, and proceed to apply the theory systematically in later sections via approximations and a global existence theorem for a nonlinear system, obtained via a fixed point theorem for the evolution operator. Our work is consistent with first-principle real time propagation of electronic states, aimed at finding the electronic responses of quantum molecular systems and nanostructures. We present two full 3D quantum atomistic simulations using the finite element method for discretizing the real-space, and the FEAST eigenvalue algorithm for solving the evolution operator at each time step. These numerical experiments are representative of the theoretical results.
△ Less
Submitted 13 September, 2013;
originally announced September 2013.
