Showing 1–19 of 19 results for author: Janssens, D

A Novel Diamond-like Carbon based photocathode for PICOSEC Micromegas detectors

Authors: X. Wang, R. Aleksan, Y. Angelis, J. Bortfeldt, F. Brunbauer, M. Brunoldi, E. Chatzianagnostou, J. Datta, K. Degmelt, G. Fanourakis, D. Fiorina, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, K. Gnanvo, F. J. Iguaz, D. Janssens, A. Kallitsopoulou, M. Kovacic, B. Kross, P. Legou, M. Lisowska, J. Liu, I. Maniatis , et al. (26 additional authors not shown)

Abstract: The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector based on a MM detector operating in a two-stage amplification mode and a Cherenkov radiator. Prototypes equipped with cesium iodide (CsI) photocathodes have shown promising time resolutions as precise as 24 picoseconds (ps) for Minimum Ionizing Particles. However, due to the high hygroscopicity and susceptibility to ion bomb… ▽ More The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector based on a MM detector operating in a two-stage amplification mode and a Cherenkov radiator. Prototypes equipped with cesium iodide (CsI) photocathodes have shown promising time resolutions as precise as 24 picoseconds (ps) for Minimum Ionizing Particles. However, due to the high hygroscopicity and susceptibility to ion bombardment of the CsI photocathodes, alternative photocathode materials are needed to improve the robustness of PICOSEC MM. Diamond-like Carbon (DLC) film have been introduced as a novel robust photocathode material, which have shown promising results. A batch of DLC photocathodes with different thicknesses were produced and evaluated using ultraviolet light. The quantum efficiency measurements indicate that the optimized thickness of the DLC photocathode is approximately 3 nm. Furthermore, DLC photocathodes show good resistance to ion bombardment in aging test compared to the CsI photocathode. Finally, a PICOSEC MM prototype equipped with DLC photocathodes was tested in muon beams. A time resolution of around 42 ps with a detection efficiency of 97% for 150 GeV/c muons were obtained. These results indicate the great potential of DLC as a photocathode for the PICOSEC MM detector. △ Less

Submitted 25 June, 2024; v1 submitted 12 June, 2024; originally announced June 2024.

Spatial resolution improvements with finer-pitch GEMs

Authors: K. J. Flöthner, L. Scharenberg, A. Brask, F. Brunbauer, F. Garcia, D. Janssens, B. Ketzer, M. Lisowska, H. Muller, E. Oliveri, G. Orlandini, D. Pfeiffer, L. Ropelewski, J. Samarati, M. Van Stenis, R. Veenhof

Abstract: Gas Electron Multipliers (GEMs) are used in many particle physics experiments, employing their 'standard' configuration with amplification holes of 140 um pitch in a hexagonal pattern. However, the collection of the charge cloud from the primary ionisation electrons from the drift region of the detector into the GEM holes affects the position information from the initial interacting particle. In t… ▽ More Gas Electron Multipliers (GEMs) are used in many particle physics experiments, employing their 'standard' configuration with amplification holes of 140 um pitch in a hexagonal pattern. However, the collection of the charge cloud from the primary ionisation electrons from the drift region of the detector into the GEM holes affects the position information from the initial interacting particle. In this paper, the results from studies with a triple-GEM detector with an X-Y-strip readout anode are presented. It is demonstrated that GEMs with a finer hole pitch of here 90 um improve the detector's spatial resolution. Within these studies, also the impact of the front-end electronics on the spatial resolution was investigated, which is briefly discussed in the paper. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Single channel PICOSEC Micromegas detector with improved time resolution

Authors: A. Utrobicic, R. Aleksan, Y. Angelis, J. Bortfeldt, F. Brunbauer, M. Brunoldi, E. Chatzianagnostou, J. Datta, K. Dehmelt, G. Fanourakis, D. Fiorina, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, K. Gnanvo, F. J. Iguaz, D. Janssens, A. Kallitsopoulou, M. Kovacic, B. Kross, P. Legou, M. Lisowska, J. Liu, M. Lupberger , et al. (25 additional authors not shown)

Abstract: This paper presents design guidelines and experimental verification of a single-channel PICOSEC Micromegas (MM) detector with an improved time resolution. The design encompasses the detector board, vessel, auxiliary mechanical parts, and electrical connectivity for high voltage (HV) and signals, focusing on improving stability, reducing noise, and ensuring signal integrity to optimize timing perfo… ▽ More This paper presents design guidelines and experimental verification of a single-channel PICOSEC Micromegas (MM) detector with an improved time resolution. The design encompasses the detector board, vessel, auxiliary mechanical parts, and electrical connectivity for high voltage (HV) and signals, focusing on improving stability, reducing noise, and ensuring signal integrity to optimize timing performance. A notable feature is the simple and fast reassembly procedure, facilitating quick replacement of detector internal components that allows for an efficient measurement strategy involving different detector components. The paper also examines the influence of parasitics on the output signal integrity. To validate the design, a prototype assembly and three interchangeable detector boards with varying readout pad diameters were manufactured. The detectors were initially tested in the laboratory environment. Finally, the timing performance of detectors with different pad sizes was verified using a Minimum Ionizing Particle (MIP) beam test. Notably, a record time resolution for a PICOSEC Micromegas detector technology with a CsI photocathode of 12.5$\pm$0.8 ps was achieved with a 10 mm diameter readout pad size detector. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Characterisation of resistive MPGDs with 2D readout

Authors: L. Scharenberg, F. Brunbauer, H. Danielson, Z. Fang, K. J. Flöthner, F. Garcia, D. Janssens, M. Lisowska, J. Liu, Y. Lyu, B. Mehl, H. Muller, R. de Oliveira, E. Oliveri, G. Orlandini, D. Pfeiffer, O. Pizzirusso, L. Ropelewski, J. Samarati, M. Shao, A. Teixeira, M. Van Stenis, R. Veenhof, Z. Zhang, Y. Zhou

Abstract: Micro-Pattern Gaseous Detectors (MPGDs) with resistive anode planes provide intrinsic discharge robustness while maintaining good spatial and time resolutions. Typically read out with 1D strips or pad structures, here the characterisation results of resistive anode plane MPGDs with 2D strip readout are presented. A uRWELL prototype is investigated in view of its use as a reference tracking detecto… ▽ More Micro-Pattern Gaseous Detectors (MPGDs) with resistive anode planes provide intrinsic discharge robustness while maintaining good spatial and time resolutions. Typically read out with 1D strips or pad structures, here the characterisation results of resistive anode plane MPGDs with 2D strip readout are presented. A uRWELL prototype is investigated in view of its use as a reference tracking detector in a future gaseous beam telescope. A MicroMegas prototype with a fine-pitch mesh (730 line-pairs-per-inch) is investigated, both for comparison and to profit from the better field uniformity and thus the ability to operate the detector more stable at high gains. Furthermore, the measurements are another application of the RD51 VMM3a/SRS electronics. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Studying signals in particle detectors with resistive elements such as the 2D resistive strip bulk MicroMegas

Authors: Djunes Janssens, Florian Brunbauer, Karl Jonathan Flöthner, Marta Lisowska, Hans Muller, Eraldo Oliveri, Giorgio Orlandini, Werner Riegler, Leszek Ropelewski, Heinrich Schindler, Lucian Scharenberg, Antonija Utrobicic, Rob Veenhof

Abstract: As demonstrated by the ATLAS New Small Wheel community with their MicroMegas (MM) design, resistive electrodes are now used in different detector types within the Micro Pattern Gaseous Detector family to improve their robustness or performance. The extended form of the Ramo-Shockley theorem for conductive media has been applied to a 1 M$Ω$/$\Box$ 2D resistive strip bulk MM to calculate the signal'… ▽ More As demonstrated by the ATLAS New Small Wheel community with their MicroMegas (MM) design, resistive electrodes are now used in different detector types within the Micro Pattern Gaseous Detector family to improve their robustness or performance. The extended form of the Ramo-Shockley theorem for conductive media has been applied to a 1 M$Ω$/$\Box$ 2D resistive strip bulk MM to calculate the signal's spreading over neighbouring channels using an 80 GeV/c muon track. For this geometry, the dynamic weighting potential was obtained numerically using a finite element solver by applying a junction condition and coordinate scaling technique to accurately represent the boundary conditions of a $10\times 10$ cm$^2$ active area. Using test beam measurements, the results of this model will be used to benchmark this microscopic modelling methodology for signal induction in resistive particle detectors. △ Less

Submitted 4 April, 2023; originally announced April 2023.

Comments: There are 6 pages and 4 figures. Proceeding for the 7th International Conference on Micro-Pattern Gaseous Detectors, 11-16 December 2022, Rehovot, Israel

A large area 100 channel Picosec Micromegas detector with sub 20 ps time resolution

Authors: Antonija Utrobicic, Yannis Angelis, Stephan Aune, Jonathan Bortfeldt, Florian Brunbauer, Evridiki Chatzianagnostou, Klaus Dehmelt, Daniel Desforge, George Fanourakis, Karl Jonathan Floethner, Michele Gallinaro, Francisco Garcia, Prakhar Garg, Ioannis Giomataris, Kondo Gnanvo, Thomas Gustavsson, Francisco Jose Iguaz, Djunes Janssens, Alexandra Kallitsopoulou, Marinko Kovacic, Philippe Legou, Marta Lisowska, Jianbei Liu, Michael Lupberger, Simona Malace , et al. (20 additional authors not shown)

Abstract: The PICOSEC Micromegas precise timing detector is based on a Cherenkov radiator coupled to a semi-transparent photocathode and a Micromegas amplification structure. The first proof of concept single-channel small area prototype was able to achieve time resolution below 25 ps. One of the crucial aspects in the development of the precise timing gaseous detectors applicable in high-energy physics exp… ▽ More The PICOSEC Micromegas precise timing detector is based on a Cherenkov radiator coupled to a semi-transparent photocathode and a Micromegas amplification structure. The first proof of concept single-channel small area prototype was able to achieve time resolution below 25 ps. One of the crucial aspects in the development of the precise timing gaseous detectors applicable in high-energy physics experiments is a modular design that enables large area coverage. The first 19-channel multi-pad prototype with an active area of approximately 10 cm$^2$ suffered from degraded timing resolution due to the non-uniformity of the preamplification gap. A new 100 cm$^2$ detector module with 100 channels based on a rigid hybrid ceramic/FR4 Micromegas board for improved drift gap uniformity was developed. Initial measurements with 80 GeV/c muons showed improvements in timing response over measured pads and a time resolution below 25 ps. More recent measurements with a new thinner drift gap detector module and newly developed RF pulse amplifiers show that the resolution can be enhanced to a level of 17~ps. This work will present the development of the detector from structural simulations, design, and beam test commissioning with a focus on the timing performance of a thinner drift gap detector module in combination with new electronics using an automated timing scan method. △ Less

Submitted 31 March, 2023; originally announced April 2023.

Towards robust PICOSEC Micromegas precise timing detectors

Authors: Marta Lisowska, Yannis Angelis, Stephan Aune, Jonathan Bortfeldt, Florian Brunbauer, Evridiki Chatzianagnostou, Klaus Dehmelt, Daniel Desforge, George Fanourakis, Karl Jonathan Floethner, Michele Gallinaro, Francisco Garcia, Prakhar Garg, Ioannis Giomataris, Kondo Gnanvo, Thomas Gustavsson, Francisco Jose Iguaz, Djunes Janssens, Alexandra Kallitsopoulou, Marinko Kovacic, Philippe Legou, Jianbei Liu, Michael Lupberger, Simona Malace, Ioannis Maniatis , et al. (21 additional authors not shown)

Abstract: The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector consisting of a Cherenkov radiator combined with a photocathode and a MM amplifying structure. A 100-channel non-resistive PICOSEC MM prototype with 10x10 cm^2 active area equipped with a Cesium Iodide (CsI) photocathode demonstrated a time resolution below 18 ps. The objective of this work is to improve the PICOSEC MM detec… ▽ More The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector consisting of a Cherenkov radiator combined with a photocathode and a MM amplifying structure. A 100-channel non-resistive PICOSEC MM prototype with 10x10 cm^2 active area equipped with a Cesium Iodide (CsI) photocathode demonstrated a time resolution below 18 ps. The objective of this work is to improve the PICOSEC MM detector robustness aspects; i.e. integration of resistive MM and carbon-based photocathodes; while maintaining good time resolution. The PICOSEC MM prototypes have been tested in laboratory conditions and successfully characterised with 150 GeV/c muon beams at the CERN SPS H4 beam line. The excellent timing performance below 20 ps for an individual pad obtained with the 10x10 cm^2 area resistive PICOSEC MM of 20 MOhm/sq showed no significant time resolution degradation as a result of adding a resistive layer. A single-pad prototype equipped with a 12 nm thick Boron Carbide (B4C) photocathode presented a time resolution below 35 ps; opening up new possibilities for detectors with robust photocathodes. The results made the concept more suitable for the experiments in need of robust detectors with good time resolution. △ Less

Submitted 31 March, 2023; originally announced March 2023.

The novel XYU-GEM to resolve ambiguities

Authors: K. J. Flöthner, F. Brunbauer, S. Ferry, F. Garcia, D. Janssens, B. Ketzer, M. Lisowska, H. Muller, R. de Oliveira, E. Oliveri, G. Orlandini, D. Pfeiffer, L. Ropelewski, J. Samarati, F. Sauli, L. Scharenberg, M. van Stenis, A. Utrobicic, R. Veenhof

Abstract: Removing ambiguities within a single stage becomes crucial when one can not use multiple detectors behind each other to resolve them which naturally is the case for neutral radiation. An example would be RICH detectors. Commonly pixilated readout is choosen for this purpose. However, this causes a remarkable increase in quantity of channels and does not scale up well. Therefore, the XYU-GEM was pr… ▽ More Removing ambiguities within a single stage becomes crucial when one can not use multiple detectors behind each other to resolve them which naturally is the case for neutral radiation. An example would be RICH detectors. Commonly pixilated readout is choosen for this purpose. However, this causes a remarkable increase in quantity of channels and does not scale up well. Therefore, the XYU-GEM was proposed as a three coordinate strip-readout which is combined with a triple GEM detector. The readout complements a common XY readout with an additional projection which is tilted by 45°. The overdetermination due to three projections can be used to resovle ambiguities. Following the detector design will be explained, first measurements discussed to understand the response of the detector and a way to change the charge sharing without changing the manufacturing parameters of the readout. △ Less

Submitted 31 March, 2023; originally announced March 2023.

Performance of the new RD51 VMM3a/SRS beam telescope---studying MPGDs simultaneously in energy, space and time at high rates

Authors: L. Scharenberg, J. Bortfeldt, F. Brunbauer, K. Desch, K. Flöthner, F. Garcia, D. Janssens, M. Lisowska, H. Muller, E. Oliveri, G. Orlandini, D. Pfeiffer, L. Ropelewski, J. Samarati, D. Sorvisto, M. van Stenis, R. Veenhof

Abstract: The RD51 collaboration maintains a common infrastructure at CERN for its R & D activities, including two beam telescopes for test beam campaigns. Recently, one of the beam telescopes has been equipped and commissioned with new multi-channel and charge-sensitive front-end electronics based on the ATLAS/BNL VMM3a front-end ASIC and the RD51 Scalable Readout System (SRS). This allows to read out the… ▽ More The RD51 collaboration maintains a common infrastructure at CERN for its R & D activities, including two beam telescopes for test beam campaigns. Recently, one of the beam telescopes has been equipped and commissioned with new multi-channel and charge-sensitive front-end electronics based on the ATLAS/BNL VMM3a front-end ASIC and the RD51 Scalable Readout System (SRS). This allows to read out the detectors at high rates (up to the MHz regime) with electronics time resolutions of the order of 1 ns and the ability to handle different detector types and sizes, due to a larger dynamic range compared to the previous front-end electronics based on the APV25 ASIC. Having studied and improved the beam telescope's performance over the course of three test beam campaigns, the results are presented in this paper. △ Less

Submitted 16 February, 2023; originally announced February 2023.

Early stages of polycrystalline diamond deposition: Laser reflectance at substrates with growing nanodiamonds

Authors: David Vázquez-Cortés, Stoffel D. Janssens, Burhannudin Sutisna, Eliot Fried

Abstract: The chemical vapor deposition of polycrystalline diamond (PCD) films is typically done on substrates seeded with diamond nanoparticles. Specular laser reflectance and a continuous film model have been used to monitor the thickness of these films during their deposition. However, most seeds are isolated during the early stages of the deposition, which questions the utility of applying such a contin… ▽ More The chemical vapor deposition of polycrystalline diamond (PCD) films is typically done on substrates seeded with diamond nanoparticles. Specular laser reflectance and a continuous film model have been used to monitor the thickness of these films during their deposition. However, most seeds are isolated during the early stages of the deposition, which questions the utility of applying such a continuous film model for monitoring deposition before film formation. In this work, we present a model based on the Rayleigh theory of scattering for laser reflectance at substrates with growing nanodiamonds to capture the early stages of PCD deposition. The reflectance behavior predicted by our model differs from that of a continuous film, which is well-described by the continuous film model. This difference enlarges as the seed density used in our model decreases. We verify this trend experimentally by depositing diamond under identical conditions on substrates with various seed densities. A relation derived from our model is used to fit reflectance data from which seed densities are obtained that are proportional to those found with electron microscopy. We also show that relying on the continuous film model for describing the early stages of deposition can result in falsely deducing the existence of incubation, and that the continuous film model can be used safely beyond the early stages of deposition. Based on these findings, we delineate a robust method for obtaining growth rates and incubation periods from reflectance measurements. This work may also advance the general understanding of nanoparticle growth and formation. △ Less

Submitted 3 October, 2022; originally announced October 2022.

Comments: 32 pages, 9 figures, 1 table

Journal ref: Nanoscale Adv., 2023, 5, 412-424

Snowmass 2021 White Paper Instrumentation Frontier 05 -- White Paper 1: MPGDs: Recent advances and current R&D

Authors: K. Dehmelt, M. Della Pietra, H. Muller, S. E. Tzamarias, A. White, S. White, Z. Zhang, M. Alviggi, I. Angelis, S. Aune, J. Bortfeldt, M. Bregant, F. Brunbauer, M. T. Camerlingo, V. Canale, V. D'Amico, D. Desforge, C. Di Donato, R. Di Nardo, G. Fanourakis, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, K. Gnanvo , et al. (45 additional authors not shown)

Abstract: This paper will review the origins, development, and examples of new versions of Micro-Pattern Gas Detectors. The goal for MPGD development was the creation of detectors that could cost-effectively cover large areas while offering excellent position and timing resolution, and the ability to operate at high incident particle rates. The early MPGD developments culminated in the formation of the RD51… ▽ More This paper will review the origins, development, and examples of new versions of Micro-Pattern Gas Detectors. The goal for MPGD development was the creation of detectors that could cost-effectively cover large areas while offering excellent position and timing resolution, and the ability to operate at high incident particle rates. The early MPGD developments culminated in the formation of the RD51 collaboration which has become the critical organization for the promotion of MPGDs and all aspects of their production, characterization, simulation, and uses in an expanding array of experimental configurations. For the Snowmass 2021 study, a number of Letters of Interest were received that illustrate ongoing developments and expansion of the use of MPGDs. In this paper, we highlight high precision timing, high rate application, trigger capability expansion of the SRS readout system, and a structure designed for low ion backflow. △ Less

Submitted 19 March, 2022; v1 submitted 12 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Recoil imaging for directional detection of dark matter, neutrinos, and physics beyond the Standard Model

Authors: C. A. J. O'Hare, D. Loomba, K. Altenmüller, H. Álvarez-Pol, F. D. Amaro, H. M. Araújo, D. Aristizabal Sierra, J. Asaadi, D. Attié, S. Aune, C. Awe, Y. Ayyad, E. Baracchini, P. Barbeau, J. B. R. Battat, N. F. Bell, B. Biasuzzi, L. J. Bignell, C. Boehm, I. Bolognino, F. M. Brunbauer, M. Caamaño, C. Cabo, D. Caratelli, J. M. Carmona , et al. (142 additional authors not shown)

Abstract: Recoil imaging entails the detection of spatially resolved ionization tracks generated by particle interactions. This is a highly sought-after capability in many classes of detector, with broad applications across particle and astroparticle physics. However, at low energies, where ionization signatures are small in size, recoil imaging only seems to be a practical goal for micro-pattern gas detect… ▽ More Recoil imaging entails the detection of spatially resolved ionization tracks generated by particle interactions. This is a highly sought-after capability in many classes of detector, with broad applications across particle and astroparticle physics. However, at low energies, where ionization signatures are small in size, recoil imaging only seems to be a practical goal for micro-pattern gas detectors. This white paper outlines the physics case for recoil imaging, and puts forward a decadal plan to advance towards the directional detection of low-energy recoils with sensitivity and resolution close to fundamental performance limits. The science case covered includes: the discovery of dark matter into the neutrino fog, directional detection of sub-MeV solar neutrinos, the precision study of coherent-elastic neutrino-nucleus scattering, the detection of solar axions, the measurement of the Migdal effect, X-ray polarimetry, and several other applied physics goals. We also outline the R&D programs necessary to test concepts that are crucial to advance detector performance towards their fundamental limit: single primary electron sensitivity with full 3D spatial resolution at the $\sim$100 micron-scale. These advancements include: the use of negative ion drift, electron counting with high-definition electronic readout, time projection chambers with optical readout, and the possibility for nuclear recoil tracking in high-density gases such as argon. We also discuss the readout and electronics systems needed to scale-up such detectors to the ton-scale and beyond. △ Less

Submitted 17 July, 2022; v1 submitted 11 March, 2022; originally announced March 2022.

Comments: 77 pages, 20 figures. Submitted to the Proceedings of the US Community Study on the Future of Particle Physics (Snowmass 2021)

Formation and morphology of closed and porous films grown from grains seeded on substrates: Two-dimensional simulations

Authors: Stoffel D. Janssens, David Vázquez-Cortés, Eliot Fried

Abstract: Two-dimensional simulations are used to explore topological transitions that occur during the formation of films grown from grains that are seeded on substrates. This is done for a relatively large range of the initial value $Φ_s$ of the grain surface fraction $Φ$. The morphology of porous films is captured at the transition when grains connect to form a one-component network using newly developed… ▽ More Two-dimensional simulations are used to explore topological transitions that occur during the formation of films grown from grains that are seeded on substrates. This is done for a relatively large range of the initial value $Φ_s$ of the grain surface fraction $Φ$. The morphology of porous films is captured at the transition when grains connect to form a one-component network using newly developed raster-free algorithms that combine computational geometry and network theory. Further insight on the morphology of porous films and their suspended counterparts is obtained by studying the pore surface fraction $Φ_p$, the pore over grain ratio, the pore area distribution, and the contribution of pores of certain chosen areas to $Φ_p$. Pinhole survival is evaluated at the transition when film closure occurs using survival function estimates. The morphology of closed films ($Φ= 1$) is also characterized and is quantified by measuring grain areas and perimeters. The majority of investigated quantities are found to depend sensitively on $Φ_s$ and the long-time persistence of pinholes exhibits critical behavior as a function of $Φ_s$. In addition to providing guidelines for designing effective processes for manufacturing thin films and suspended porous films with tailored properties, this work may advance the understanding of continuum percolation theory. △ Less

Submitted 20 January, 2022; v1 submitted 22 September, 2021; originally announced September 2021.

Rate-capability of the VMM3a Front End in the RD51 Scalable Readout System

Authors: D. Pfeiffer, L. Scharenberg, P. Schwäbig, S. Alcock, F. Brunbauer, M. J. Christensen, K. Desch, K. Flöthner, F. Garcia, R. Hall-Wilton, M. Hracek, G. Iakovidis, D. Janssens, J. Kaminski, M. Lupberger, H. Muller, E. Oliveri, L. Ropelewski, A. Rusu, J. Samarati, M. van Stenis, A. Utrobicic, R. Veenhof

Abstract: The VMM3a is an Application Specific Integrated Circuit (ASIC), specifically developed for the readout of gaseous detectors. Originally developed within the ATLAS New Small Wheel (NSW) upgrade, it has been successfully integrated into the Scalable Readout System (SRS) of the RD51 collaboration. This allows, to use the VMM3a also in small laboratory set-ups and mid-scale experiments, which make use… ▽ More The VMM3a is an Application Specific Integrated Circuit (ASIC), specifically developed for the readout of gaseous detectors. Originally developed within the ATLAS New Small Wheel (NSW) upgrade, it has been successfully integrated into the Scalable Readout System (SRS) of the RD51 collaboration. This allows, to use the VMM3a also in small laboratory set-ups and mid-scale experiments, which make use of Micro-Pattern Gaseous Detectors (MPGDs). As part of the integration of the VMM3a into the SRS, the readout and data transfer scheme was optimised to reach a high rate-capability of the entire readout system and profit from the VMM3a's high single-channel rate-capability of 3.6 Mhits/s. The optimisation focused mainly on the handling of the data output stream of the VMM3a, but also on the development of a trigger-logic between the front-end cards and the DAQ computer. In this article, two firmware implementations of the non-ATLAS continuous readout mode are presented, as well as the implementation of the trigger-logic. Afterwards, a short overview on X-ray imaging results is presented, to illustrate the high rate-capability rom an application point-of-view. △ Less

Submitted 2 February, 2022; v1 submitted 21 September, 2021; originally announced September 2021.

Boundary Curvature Effect on the Wrinkling of Thin Suspended Films

Authors: Stoffel D. Janssens, Burhannudin Sutisna, Alessandro Giussani, David Vázquez-Cortés, Eliot Fried

Abstract: In this letter, we demonstrate a relation between the boundary curvature $κ$ and the wrinkle wavelength $λ$ of a thin suspended film under boundary confinement. Experiments are done with nanocrystalline diamond films of thickness $t \approx 184$~nm grown on glass substrates. By removing portions of the substrate after growth, suspended films with circular boundaries of radius $R$ ranging from appr… ▽ More In this letter, we demonstrate a relation between the boundary curvature $κ$ and the wrinkle wavelength $λ$ of a thin suspended film under boundary confinement. Experiments are done with nanocrystalline diamond films of thickness $t \approx 184$~nm grown on glass substrates. By removing portions of the substrate after growth, suspended films with circular boundaries of radius $R$ ranging from approximately 30 to 811 $μ$m are made. Due to residual stresses, the portions of film attached to the substrate are of compressive prestrain $ε_0 \approx 11 \times 10^{-4}$ and the suspended portions of film are azimuthally wrinkled at their boundary. We find that $λ$ monotonically decreases with $κ$ and present a model predicting that $λ\propto t^{1/2}(ε_0 + ΔR κ)^{-1/4}$, where $ΔR$ denotes a penetration depth over which strain relaxes at a boundary. This relation is in agreement with our experiments and may be adapted to other systems such as plant leaves. Also, we establish a novel method for measuring residual compressive strain in thin films. △ Less

Submitted 19 February, 2020; originally announced February 2020.

Integrated Agent-based Microsimulation Framework for Examining Impacts of Mobility-oriented Policies

Authors: Muhammad Adnan, Fatma Outay, Shiraz Ahmed, Erika Brattich, Silvana di Sabatino, Davy Janssens

Abstract: Travel demand management measures/policies are important to sustain positive changes among individuals' travel behaviour. An integrated agent-based microsimulation platform provides a rich framework for examining such interventions to assess their impacts using indicators about demand as well as supply side. This paper presents an approach, where individual schedules, derived from a lighter versio… ▽ More Travel demand management measures/policies are important to sustain positive changes among individuals' travel behaviour. An integrated agent-based microsimulation platform provides a rich framework for examining such interventions to assess their impacts using indicators about demand as well as supply side. This paper presents an approach, where individual schedules, derived from a lighter version of an activity-based model, are fed into a MATSIM simulation framework. Simulations are performed for two European cities i.e. Hasselt (Belgium), Bologna (Italy). After calibrating the modelling framework against aggregate traffic counts for the base case, the impacts of a few traffic management policies (restricting car access, increase in bus frequency) are examined. The results indicate that restricting car access is more effective in terms of reducing traffic from the network and also shifting car drivers/passengers to other modes of travel. The enhancement of bus infrastructure in relation to increase in frequency caused shifting of bicyclist towards public transport, which is an undesirable result of the policy if the objective is to improve sustainability and environment. In future research, the framework will be enhanced to integrate emission and air dispersion models to ascertain effects on air quality as a result of such interventions. △ Less

Submitted 11 May, 2020; v1 submitted 22 January, 2020; originally announced January 2020.

Comments: Post-print

MSC Class: 62P20

Journal ref: Personal and Ubiquitous Computing, 2020

Nanocrystalline diamond-glass platform for the development of three-dimensional micro- and nanodevices

Authors: Stoffel D. Janssens, David Vázquez-Cortés, Alessandro Giussani, James A. Kwiecinski, Eliot Fried

Abstract: Low-cost and robust platforms are key for the development of next-generation 3D micro- and nanodevices. To fabricate such platforms, nanocrystalline diamond (NCD) is a highly appealing material due to its biocompatibility, robustness, and mechanical, electrical, electrochemical, and optical properties, while glass substrates with through vias are ideal interposers for 3D integration due to the exc… ▽ More Low-cost and robust platforms are key for the development of next-generation 3D micro- and nanodevices. To fabricate such platforms, nanocrystalline diamond (NCD) is a highly appealing material due to its biocompatibility, robustness, and mechanical, electrical, electrochemical, and optical properties, while glass substrates with through vias are ideal interposers for 3D integration due to the excellent properties of glass. However, develo** devices that are comprised of NCD films and through glass vias (TGVs) has rarely been attempted due to a lack of effective process strategies. In this work, a low-cost process - free of photolithography and transfer-printing - for fabricating arrays of TGVs that are sealed with suspended portions of an ultra-thin NCD film on one side is presented. These highly transparent structures may serve as a platform for the development of microwells for single-cell culture and analysis, 3D integrated devices such as microelectrodes, and quantum technologies. The process is demonstrated by fabricating TGVs that are sealed with an NCD film of thickness 175 nm and diameter 60 $μ$m. The technology described can be extended by replacing NCD with silicon nitride or silicon carbide, allowing for the development of complex heterogenous structures on the small scale. △ Less

Submitted 18 August, 2019; v1 submitted 11 July, 2019; originally announced July 2019.

Journal ref: Diamond Relat. Mater. 98, 107511 (2019)

Behavior of self-propelled acetone droplets in a Leidenfrost state on liquid substrates

Authors: Stoffel D. Janssens, Satoshi Koizumi, Eliot Fried

Abstract: It is demonstrated that non-coalescent droplets of acetone can be formed on liquid substrates. The fluid flows around and in an acetone droplet hovering on water are recorded to shed light on the mechanisms which might lead to non-coalescence. For sufficiently low impact velocities, droplets undergo a damped oscillation on the surface of the liquid substrate but at higher velocities clean bounce-o… ▽ More It is demonstrated that non-coalescent droplets of acetone can be formed on liquid substrates. The fluid flows around and in an acetone droplet hovering on water are recorded to shed light on the mechanisms which might lead to non-coalescence. For sufficiently low impact velocities, droplets undergo a damped oscillation on the surface of the liquid substrate but at higher velocities clean bounce-off occurs. Comparisons of experimentally observed static configurations of floating droplets to predictions from a theoretical model for a small non-wetting rigid sphere resting on a liquid substrate are made and a tentative strategy for determining the thickness of the vapor layer under a small droplet on a liquid is proposed. This strategy is based on the notion of effective surface tension. The droplets show self-propulsion in straight line trajectories in a manner which can be ascribed to a Marangoni effect. Surprisingly, self-propelled droplets can become immersed beneath the undisturbed water surface. This phenomenon is reasoned to be drag-inducing and might provide a basis for refining observations in previous work. △ Less

Submitted 10 February, 2017; originally announced February 2017.

Journal ref: Physics of Fluids 29, 032103, 2017

Effect of a surface tension imbalance on a partly submerged cylinder

Authors: Stoffel D. Janssens, Vikash Chaurasia, Eliot Fried

Abstract: We perform a static analysis of a circular cylinder that forms a barrier between surfactant-laden and surfactant-free portions of a liquid$-$gas interface. In addition to determining the general implications of the balances for forces and torques, we quantify how the imbalance $Δγ=γ_a-γ_b$ between the uniform surface tension $γ_a$ of the surfactant-free portion of the interface and the uniform sur… ▽ More We perform a static analysis of a circular cylinder that forms a barrier between surfactant-laden and surfactant-free portions of a liquid$-$gas interface. In addition to determining the general implications of the balances for forces and torques, we quantify how the imbalance $Δγ=γ_a-γ_b$ between the uniform surface tension $γ_a$ of the surfactant-free portion of the interface and the uniform surface tension $γ_b$ of the surfactant-laden portion of the interface influences the load-bearing capacity of a hydrophobic cylinder. Moreover, we demonstrate that the difference between surface tensions on either side of a cylinder with a cross-section of arbitrary shape induces a horizontal force component $f^h$ equal to $Δγ$ in magnitude, when measured per unit length of the cylinder. With an energetic argument, we show that this relation also applies to rod-like barriers with cross-sections of variable shape. In addition, we apply our analysis to amphiphilic Janus cylinders and we discuss practical implications of our findings for Marangoni propulsion and surface pressure measurements. △ Less

Submitted 4 June, 2017; v1 submitted 10 February, 2017; originally announced February 2017.

Journal ref: Journal of Fluid Mechanics, 830, 369-386, 2017